[Framemaker9.0] The horizontal bar of division operator is too thick, how to make it thin?

have no idea how to fix it...

FM uses the DefaultFamily= font setting in the maker.ini (usually Times or TimesNewRoman) for most of the characters to build the equations.
The divison line is nothing more than a series of hyphens (----) tightly tracked (-16.7%) to run them together. So you are at the mercy of the font designer for the thickness of the divisor line as FM interprets it.
You can change the font specification in the equations using the Equation Fonts... (<esc> m f shortcut) to specify a character tag from the catalog.

Similar Messages

How do I create a vertical side menu with its own styling separate from the horizontal bar above it?

Hello. I need assistance in styling my side menu. I would like for it to have a different style than the horizontal bar that is above it. I would like that the side menu have a black background and with white text vertically aligned to the left. But I would also like that the mouse's arrow to turn into a hand when it touches the letters instead of during the entire width of the background. When I began styling the text, everything aligned fine until I added the links in html code. When I added the <a> tag and created a link to another page, the text goes from the left to the center of the black box. And the entire width is a link rather than just the words. To correct this, I tried renaming the div tag containg the menu. I tried renaming the ul tag. And I tried renaming the li tag and changing the declarations. None of these ideas worked. I thought about changing the <a> tag in the head of the document, but that didn't change the styling either. I also tried creating the black background by inserting a black box as a background image with the links over top of the image. It didn't work. I would appreciate your assistance.   I will supply the coding if anyone is interested in looking at it. Thank you.
Nora.

I can post a link to the page. But I will need to upload it. It will take a day to show. But after I wrote to you. I began working with creating additional a:link styles. I was able to create a shortened clickable area of one the words in the vertical menu. Your advice reinforced what I have learned. The following code shows that I started to make different styles of the a:link for each word on the vertical menu. I think that this will work. To indicate the different a:link style I used bold letters . Thank you very much.
html:
<div class="side_menu_nav">
     <ul class="side_menu">
          <li class="side_menu"><a href="still image.html">STILL IMAGE</a></li>
          <li class="side_menu_video"> <a href="video.html">VIDEO</a></li>
          <li class="side_menu" ><a href="animation.html">ANIMATION</a></li>
          <li class="side_menu" ><a href="website.html">WEBSITE</a></li>
     </ul>
</div>
CSS:
.side_menu_nav {
    margin-top: 100px;
    width: 190px;
    height: 230px;
    background-color: #F63;
    font-size: 18.5px;
    z-index: 5;
    font-family: Arial, Helvetica, sans-serif;
side_menu ul {
    list-style-type: none;
    padding-left: 10px;
side_menu li {
    display: list-item;
.side_menu a:link {
    text-align: left;
    color: #FFF;
    background-color: #000;
    padding-left: 0px;
    padding-right: 0px;
    padding-top: 0px;
    padding-bottom: 0px;
    width: 190px;
    margin-top: 15px;
    margin-left: 15px;
    margin-right: 0px;
    text-decoration: none;
    width: 120px;
.side_menu_video a:link {
   text-align: left;
    color: #FFF;
    background-color: #000;
    padding-left: 0px;
    padding-right: 0px;
    padding-top: 0px;
    padding-bottom: 0px;
    width: 65px;
    margin-top: 15px;
    margin-left: 15px;
    margin-right: 0px;
    text-decoration: none;
.side_menu a:visited {
    color: #FFF;
    background-color: #000;
.side_menu a:hover {
    color: #CCC;
.side_menu a:active   {
    color: #000;/*text*/

HT201210 Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle o

Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle of something. What should I do?

DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

I want to capture the remainder of a division operation

Hi,
I need to capture the remainder of a division operation. Ex : 33/9 remainder is 6. I want to know the way to capture the remainder. Can any body help me out.
Regards,
Srinivas

Hi,
MOD : Integer remainder of the division of the left by the right operand
Syntax
[COMPUTE] result = [+|-] operand1
[{+|-|*|/|DIV|MOD|**} [+|-] operand2
[{+|-|*|/|DIV|MOD|**} [+|-] operand3
In an arithmetic expression, you can use arithmetic operators to link an operand operand1 with one or more operands operand2, operand3, and so on; parentheses are possible. Arithmetic expressions can only be used in the COMPUTE statement. Each arithmetic expression has a calculation type.
Arunima

How to lock the Properties bar to a toolbar or in some other way, make it permanently open?

How to lock the Properties bar to a toolbar or in some other way, make it permanently open?
Or can that checkbox 'keep tool selected' be made a permanent toolbar item?
I use the rubber stamp tool several times on multiple pages in certain pdfs and found that if I open the 'properties bar', I can select 'keep tool selected' and stamp away as much as I like without having to choose the stamp tool dropdown menu and select 'custom' each time I stamp. I appreciate the recent update that added a recently stamped stamps area and not having to click 'proceed' each time.

You can't lock the Properties Bar, but you also don't need to in order to make the Stamp tool remain selected.
Just right-click it in the Comment menu on the right and select "Keep Tool Selected".

My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

You sent the iphone 4s in Italy with the program 'Syrians', which is beautiful but you put the Italian language nn .. nn is normal .. how to make even the Italian language ..

you sent the iphone 4s in Italy with the program 'Syrians', which is beautiful but you put the Italian language nn .. nn is normal .. how to make even the Italian language ..

you sent the iphone 4s in Italy with the program 'Syrians', which is beautiful but you put the Italian language nn .. nn is normal .. how to make even the Italian language ..

Is there a way of moving/quantizing multiple audio regions at once to the nearest bar/beat/division?

Hi,
I'm having trouble finding a solution which I hope turns out to be fairly simple. Here's my problem:
I often make drum beats from audio files that looks something like this:
What I'd like to know is if there is a way to highlight say all of the snare audio regions and snap or quantize the "audio region start" to the nearest beat or division. I've been looking everywhere and I just can't seem to find a way to do it to multiple regions at once. It seems like somehting that should maybe be fairly simple. Turning "Flex" on doesn't work as that quantizes the transients as opposed to just the start of each audio region.
The reason I ask is that sometimes when zooming in fully, it turns out some of the regions are not exactly on the grid line.
I hope I made sense there and I'd appreciate any help. Many thanks in advance.

Hi
The "traditional" way to quantise audio regions is to use the quantise functionality in the Event List.
CCT

Remove the horizontal bar of a letter A?

Hi there,
can anyone help?
I have a letter A and i wish to remove the horizontal line that connects the left and right lines... here is my sample with comments on (its very small pic) http://drop.io/iangregson/asset/lettera
I have tried a number of methods, i tried the knife tool but couldn't get it to line up correctly even using the the ALT key so that it forms straight lines, I then tried the Scissor tool by clicking each segment (four corners explained in image above) and it states i can't do this on "and endpoint"
So my next thought was to try and extend the path so i clicked on the lower left with the pen tool and then point on the upper left... this looked promising .. - i did the same on the right i.e. right lower to right upper - but didn't work perfectly..
Of course before doing any of the above i did Type > create outlines
I would really appreciate any feedback anyone can give, i know i am so close ... but yet so far :-)
Thanks
Ian

> Maybe i should always do manipulation of paths with path = BLACK and FILL = none....??????????????????
Are you asking a question? It's not clear, because if you are, you need about five more question marks there.
Working with a solid stroke and fill of none is actually a very good (and common) practice.
Illustrator, unlike other drawing programs, does not provide the option to turn off fills for open paths. When an open path in Illustrator has a fill, the fill "closes" with a straight edge between the endpoints of the open path, even though there is no closing segment on the path itself. Thus, the fill makes newcomers think the path is closed, and obscures parts of the path(s) being manipulated, further confusing the user.
The confusion for newcomers is exacerbated by Illustrator's insistence upon the default installation's fill always being white. The white fill can't be distinguised from the white blank area of the Artboard.
This is why, whenever I install Illustrator, I set the default Graphic Style in the startup files and templates to fill of none and stroke of black .25 pt. That in itself is far more tedious than it should be.
Alternatively, you can edit paths in Outline View. (View Menu>Outline). That's largely a throwback to the archaic beginnings of Illustrator, when it wasn't even
able to edit in so-called "Preview Mode." It's also used as a workaround for Illustrator's poor ability to select objects that are obscured by others.
JET

How do I remove the search bar that continues to reappear no matter how many times I manually remove it?

For a short while now the search bar has been appearing on my Firefox browser. I don't want it there and removing it using the 'custom' settings when I click in a blank area in my browser does not work, it keeps coming back along with the 'bookmarks' button.
No, there is nothing in my Add/Remove programs that resembles the search bar in any way, shape or form. I've already checked again and again, it's simply not there and not an option.
Yes, I've checked if perhaps it were one of the plugins I use and that is not the case. I've removed all the plugins to check and it still appears.
I don't want this bar there, it's annoying and I want it gone. No there are no options to remove it in its options. I don't care about how useful other people say it is, I find it annoying. Every time I open Firefox it's there...I want it gone.
Refer to screenshot: http://i162.photobucket.com/albums/t254/MasakoTomoe/untitled-2.jpg
So, how do I get rid of it?

Seems that may have worked and that's great, thank you. But now I have another problem which seems to be as persistent as the search bar has been.
Now when I edit the bar and position of the buttons some of those buttons disappear when I click Ok in the customization, but reappear when I reopen the customization settings.
Why is that? When I put a space in between some of the buttons the buttons near the space will disappear and leave a blank space where it should be.
I'm beginning to be rather annoyed with this Firefox Beta to say the least and am considering returning to the version before it. Whatever I do now as far as customizing is concerned of the toolbar is reset every time I reopen Firefox. The buttons are no longer where I had set them up, the address bar is stretched to it's maximum, the Menu Bar is back the far left edge, buttons are missing that I had put there, and buttons I had removed are returned.
:| I know it may seem insignificant to some people but it annoys the crap out of me. I understand this is a beta and if there is no solution then I perhaps will use the earlier version for a while.
Thanks for your input by they way, it's much appreciated.

Stop doesn't appear on the menu bar on Version 29.0.1. How do I install it?

Stop doesn't appear on the menu bar on Version 29.0.1 and I can't find the icon in the customize menu. It just seems to have disappeared. I would also like words under the menu icons. Also the reload icon can't be moved or customized.
I JUST HATE IT WHEN WEBSITES COME OUT WITH A NEW "STREAMLINED" APPEARANCE. IT ALWAYS MEANS FEWER FEATURES AND MORE TROUBLE TO USE.
HELP!

Have you tried Classic Theme Restorer? https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/

The tray bar at bottom of screen as disappeared. how do i get it back

the tray bar at bottom of screen has disappeared and also the favorites bar and menu bar at top of screen has disappeared also. how do i get these back.. everything in IE is fine, only in firefox do i have this problem

Hello and thanks for the help. My address bar, toolbar and system tray was missing. I felt very lost without them! Pressing F11 brought them back, but every time I switch to a new page, the system tray disappears again. In the View menu, all the available toolbars are checked but I still keep loosing the system tray every time I move to a new page. H-E-L-P!

I lost the tool bar on an email to send. How do I get it back?

I did something to hide the tool bar on a note I wanted to send. Now there is not even a send button. How do I unhide the tool bar?
JPL

'''Open a Write window.'''
Do you have a menu bar with File-Edit-View etc?
If not press the alt key to make it appear.
From the menu bar select View-Layout and turn the missing toolbars back on.
Send is on the Composition toolbar.

Can I view all my bookmarks in the bookmarks bar, even if there are too many... I would like it to make extra rows and continue, instred of the arrow/list system.

I like to have instant access to all my bookmarks as I keep my RSS links and current projects up there. When there are too many to fit in one row across the screen firefox makes a little pull down menu at the end with all the rest in. I find this really annoying, its just the same as the normal bookmarks menu; I find it really hard to keep things organised when I can't see them all the time. I would like it to make a second or even third row in the tool bar so I can always see all my current RSS and Pages. Can I do this? If it wont work on firefox does anyone know of another FS, OS or FOSS browser that will?

Unfortunately, the extension does not work with Firefox 4, and Alice have no intentions to upgrade it.

I don't see a way to stop a page from loading. There is no "X" in the tool bar like there used to be, so how do I do it in Firefox Beta?

When I change my mind about loading a page I don't see anyway to stop it from building or to cancel the action. I tried to research "stop" at http://support.mozilla.com/en-US/kb/Menu%20Reference?s=%22url+bar%22&as=s#w_stop regarding the main window reference menu but nothing of what I read there seemed applicable. It appears "Stop" is supposed to be under "View", but I did not find it there. Please help! I want a simple click of the mouse action to prevent a page from loading!

You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar via View > Toolbars, also accessible via Firefox > Options.<br />
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
Firefox 4 has two bookmark buttons with a star in the Customize window.<br />
One star button has a drop marker that open a Bookmark menu.<br />
The other star button without the drop marker opens the bookmarks in the sidebar.<br />
<br />
You can drag the Bookmarks menu button with the drop marker in the Customize window from the toolbar palette on a toolbar (e.g. Navigation Toolbar or Tab Bar or to the left side of the Bookmarks Menu Items).<br />
You only see the Bookmarks menu button if the menu bar is hidden.<br />
If the bookmarks toolbar is visible then the default bookmarks menu button will appear on the right hand side of the Bookmarks Toolbar as part of the Bookmarks Toolbar Items.<br />

[Framemaker9.0] The horizontal bar of division operator is too thick, how to make it thin?

Similar Messages

Maybe you are looking for