Frames Target Link problem

I am working on a website and am having trouble with a link
that will be clicked in one frame and opened in another frame. For
some reason it isn't working. I don't want it to open a new window,
I want it to open the page in the bottom frame.
I only have one link setup (the "In Memoriam" link button)
that I've been trying but it opens in a new window.
Main Page:
http://www.alamoheights68208.com/
Any help would be GREATLY appreciated! :)

In the frameset page change this -
<frame src="bottom.html" id="_bottom" />
to this -
<frame src="bottom.html" name="_bottom" />
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"CHjr" <[email protected]> wrote in message
news:g535tr$ov$[email protected]..
>I am working on a website and am having trouble with a
link that will be
> clicked in one frame and opened in another frame. For
some reason it
> isn't
> working. I don't want it to open a new window, I want it
to open the page
> in
> the bottom frame.
>
> I only have one link setup (the "In Memoriam" link
button) that I've been
> trying but it opens in a new window.
> Main Page:
>
http://www.alamoheights68208.com/
>
> Any help would be GREATLY appreciated! :)
>

Similar Messages

Frames with link to Struts do not render before mouse over in IE 7.0?

Hi
We have troubles with frames with link to Struts, which do not render before mouse over in IE 7.0? The application works fine with Firefox 2.0 and Internet Explorer 6.0, we have analyzed the cause to be whenever
you refer to a struts 1.0 action in your frames, you'll see the frames underneath.
Does anyone have a solution to this?
<frameset cols="168,*" border="0">
<frameset rows="76,*" border="0">
    <frame name="cornerFrame" src="/gws/html/logo.htm" scrolling="NO" noresize frameborder="0">
    <frame name="menuFrame" src="/gws/html/menulogind.htm" noresize frameborder="0">
</frameset>
<frameset rows="76,*" border="0">
    <frame name="topFrame" src="/gws/html/overskrift.htm" noresize frameborder="0" >
    <frame name="mainFrame" src="/gws/logonstart.do?msg=null&navn=null" noresize frameborder="0">
</frameset>
</frameset>
<noframes>
<body>
</body>
</noframes>When you open the application, the frame is blank, the pages render only when you move the mouse inside the mainFrame area!
This is a very odd behavior.
Lars W
Enviroment:
Windows 2003 Server
Sun Java System Application Server 7 2004Q2UR2
Struts 1.0

I am having similar problems with shockwave and ie7 crashing.
This is always preceded by loss of sound.
Could this article have any significance to this issue :
Is it possible that the Cumulative Security Update for
Internet Explorer
(931768) is causing Internet Explorer to crash ??
I refer to this article
Known issues with this security update
• Controls that prompt before they are loaded
Note This issue occurs on Web sites that do not use the
recommended
techniques. This issue is resolved by using the techniques
that are described
on the following Microsoft Web site:
http://msdn.microsoft.com/ieupdate
http://msdn.microsoft.com/ieupdate)
When certain controls are loaded on a Web page, the controls
are not
correctly masked by the functionality of this update. These
controls include
controls that are used in Macromedia Shockwave Director, in
QuickTime Player,
and in Virtools Web Player. When Windows determines that a
control is
inactive, the system prompts the user before the control is
loaded.
CAN MICROSOFT HELP ON THIS ONE ?? Very frustrating when ie7
crashes and
restarts in the middle of a game of golf played against
others on the
internet especially when you winning !!
The game is at this address :
http://www.nabiscoworld.com/Games/game_large.aspx?gameid=10028

Oracle 9.2.0.1.0 installation link problems.....HELP !!!!!!

Hi All
During installation of Oracle 9.2.0.1.0 on Linux, I received the following error:
Error:
Error in invoking target install of makefile
/opt/oracle/product/9.2.0.1.0/network/lib/ins_oemagent.mk
I did some research and found that it is executing the "relink" script. So I tried to debug it it. Here is the output:
[oracle@redash oracle]$ cd /opt/oracle/product/9.2.0.1.0/bin/
[oracle@redash bin]$ relink oemagent
chmod 755 /opt/oracle/product/9.2.0.1.0/bin
if [ linux = aix ]; then \
gcc -L/opt/oracle/product/9.2.0.1.0/lib/ -L/opt/oracle/product/9.2.0.1.0/rdbms/lib -L/opt/oracle/product/9.2.0.1.0/network/lib -L/opt/oracle/product/9.2.0.1.0/lib/ -L/opt/oracle/product/9.2.0.1.0/rdbms/lib -L/opt/oracle/product/9.2.0.1.0/network/lib -o dbsnmp /opt/oracle/product/9.2.0.1.0/network/lib/s0nmi.o -lvppdc /opt/oracle/product/9.2.0.1.0/network/lib/libvps.a \
/opt/oracle/product/9.2.0.1.0/network/lib/libnmi.a \
/opt/oracle/product/9.2.0.1.0/network/lib/libnmd.a /opt/oracle/product/9.2.0.1.0/network/lib/libnms.a /opt/oracle/product/9.2.0.1.0/network/lib/libnmt.a /opt/oracle/product/9.2.0.1.0/network/lib/libnml.a \
/opt/oracle/product/9.2.0.1.0/network/lib/libnmi.a /opt/oracle/product/9.2.0.1.0/net[i]Long postings are being truncated to ~1 kB at this time.

Before installing Oracle 9.2 on linux (i'm using redhat 7.2), there are some steps you have to issue.
Those link problems are related to the wrong version of binutils, you need binutils-2.10.0.18-1.i386.rpm
You need also JDK,to set some kernel parameters and so on..
However follow the steps of this link http://www.puschitz.com/OracleOnLinux.shtml
For me it worked.
Hope this helps
Tarek

"Link Problem" in Incident Form does not seem to work right? How do I do it correctly?

1. The Link Problem tool in the task pane on our Incidents, do not seem to actually link the Incident to the Problem.
2. I can link the two by going to the Problem and adding it on the related items tab, but this is very time consuming in a call center environment, especially during an outage where we are relying a lot more on Problem and root cause analysis.
3. I have tried creating the incident and applying, then doing the Link Problem tool and selecting the problem, then applying again and selecting OK to close the incident. Again it doesn't work for me.
What am I doing wrong, number one?
Can we do this without manually opening the problem for every incident and attaching from there?
3. Can I build an incident template that will automate the Attachment to the problem at creation? (Tried this today to and it wouldn't work, but then again, the Link Problem might again be the culprit) This would be great for real time saving during
an outage. Once outage is found, I could create the template with all the necessary items filled out, and would like to have it automatically attach to the specific problem I choose at template creation, and that way analysts can simply apply template, and
click OK when they get a call related to the outage.

Thanks for the response Thomas!
The functionality seems to work just fine. I use the LINK PROBLEM and it pops up the problem search box, I search for and select a Problem, I then select it and click ok, and I get no error saying the relationship was not created.
The problem is, when I open the problem after that, there is never any relationship showing in related items there, as it says there should be.
Also, to point out, I am talking about newly created Incidents. I tried even using APPLY prior to doing the LINK PROBLEM but it still did not work. I suspect it may be a workflow problem, where the workflow to create the incident has not completed, there
for the relationship is not completed.... and I get no error.
In my work environment, we have analysts during outages taking a call every 30 seconds, and I need a more efficient way for this system to work. As of now, they spend 1-2 minutes doing the ticket, and that is too long.
I have decided to try a newb way, where I created an Incident (GENERIC OUTAGE) that folks can use, and every 15-30 minutes during an outage, I can open the problem and search for open incidents with that title, and attach all that I find from the problem
side. This is assuming that once attached they will not show up in the search to attach the next time lol. Also this assumes that if attached from the problem, they will auto resolve when the problem is resolved.
I am rusty on my programming, and am currently trying to get refreshed. I am sure that would come in handy for this :)
Oh and lastly, one additional tidbit that will make this clearer, with regard to work flow, we re also running our Service Manager in our help desk, virtualized, as they have not upgraded to Win 7 yet :(. So that compiles my time to add ticket issue :(.

InDesign to Adobe Acrobat to Adobe Reader Link problem

Hi - I'm responsible for a long conversation about link problems in creating file links in InDesign that did not work in Acrobat. At the end of that long discussion, I thought I solved the problem, but didn't. Since then, I've been MUCH more observant.
The problem appears to take place in Adobe Reader.
My home computer on Win7 is different than my work Computer (XP), but I have the same software on both.
At work, I discovered that when I clicked on a PDF, it worked fine, that its links opened a new PDF window, but when I clicked on links on the second document, the links failed and Microsoft returned an error message telling me that I was screwed. Because I was screwed, I couldn't see what was in the path of that error.
It turns out that for some unknown reason (which you might clarify for me), my Adobe Readers are attempting to open my documents in Internet Explorer and that just won't work.
What I observed at home is that I made 5 test documents in ID, and ported them to Acrobat. As it turns out, my default for opening PDFs is Adobe Reader, which I saw on the chrome of the first document I opened. When I clicked a link, and I got the error message, I noticed my browser was up.
When I set my default for opening in Acrobat, everything worked like a charm! How about that!
Now then, what that says to me is that Adobe Reader is to be used exclusively with a browser, so if the people who are going to read your internal PDF files with Reader without those files being on a web server of some type, you are totally screwed. The only way you can use Reader is if you click on the file and bring it up directly. Don't rely on linking to other documents.
I mean, that is what it seems to me.
Now, I am creating a big project for an environment without a webserver and obviously my sense of panic is palpable. That said, I believe that all my users can read my files using Acrobat (to be tested tomorrow), which I hope means I can breathe a bit easier.
Do any of you have any thoughts on this subject? If you are really curious, I can make a packet of test files available.

Karen_Little wrote:
The files and the PDFs are all in the same directory.
The tests are on local drives. All indesign files and their related PDFs were in the same directory.
The same for Word and its related PDFs. Note that the PDFs created by Word then read by Adobe Reader worked correctly. They all opened in Adobe Reader.
If the default program for opening PDFs is Acrobat, everything works correctly, with the added benefit of everything opening in a different window, which is what I want (yet to be tested at work). If the default program is Adobe Reader, the second generation of links do NOT work because Reader opens in Internet Explorer.
When I open a Word-created PDF with Acrobat, view the link, and click to the Actions menu, the action is "Open a file"
When I open an InDesign PDF with Acrobat and do the same, the action says "Open a web link"
Big BIG BIG bug.
Are you seeing the link commands by editing them in Acrobat? If not, try, so you can see the exact command and file or URL instruction. It still may be a bug, but you'll have better evidence when you report it here:
Adobe - Feature Request/Bug Report Form
And, you might want to try correcting a link command in Acrobat, to see if can work for both Acrobat and Reader.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Selection text frame in linked text frame remove

I chose in the text frame the linked text frames
get out of text and I want to delete a text frame
Is it possible that a command letter
same thing selecting the external can

Ok. Try now,
var doc = app.activeDocument;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "~a";
var found = app.selection[0].findGrep();
for(var i =found.length-1;i>=0;i--)
        var ip = found[i].insertionPoints[0];
        if(found[i].allPageItems[0] instanceof TextFrame)
                var cont = found[i].allPageItems[0].texts[0].duplicate(LocationOptions.AFTER,ip);
                found[i].remove();
Regards,
Chinna

Re: Fwd: Link Problems With Borland C++ 4.52

I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystal problem.
Many Windows based applications rely on PASCAL calling conventions, which
change the way parameters are handled in function/method calls. They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms for changing
the calling conventions of the prototypes in the generated C++ wrapper
library, so when you compile that code, the linker fails. I think that the
compiler may generate different symbols depending on calling conventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate the distribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI to the appropriate
places in the prototype definitions (see above) and use fcompile to build
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
>
We are trying to wrapper Crystal Reports from Forte. I know that there
are a number of other people in this same boat, as I've seen messages
posted here at various points during the past few weeks. We are having
a particular problem with getting the compile to go through, which we
have sent in to Forte Tech Support. I'm forwarding the message I sent
Tech Support to this group in the hopes that someone here may have
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / Alaiah Chandrashekar]
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to Crystal
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after a day
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message for each
of the functions we are trying to wrapper. We have tried a number of
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someone call
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092

James,
Thanks for your quick response. Yesterday we had been running down
the path of examining the calling conventions and trying to change them
to PASCAL, but without much success. After receiving your note, we
went back over it again, and this time we were able to finally to piece it
together. In addition to editing the Forte-generated .cc file to declare
the functions as PASCAL, we also had to turn off the compiler's case
sensitivity. (The Crystal .lib file had the function names in mixed case,
but the Borland compiler was generating all uppercase for the names.)
Now I had actually tried this yesterday and it didn't work (in fact it
generated a whole bunch of new errors) - because until we took a
second look at it today, I didn't realize that Borland's linker actually has
TWO flags that control case sensitivity. If you only turn one or the
other off, things can get pretty ugly looking. As soon as we turned
both of them off, the compile and link went beautifully. Again, thanks
for your help; hopefully we are over the worst of it now!
Dale
I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystalproblem.
>
Many Windows based applications rely on PASCAL callingconventions, which
change the way parameters are handled in function/method calls.They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms forchanging
the calling conventions of the prototypes in the generated C++wrapper
library, so when you compile that code, the linker fails. I think thatthe
compiler may generate different symbols depending on callingconventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate thedistribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI tothe appropriate
places in the prototype definitions (see above) and use fcompile tobuild
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
We are trying to wrapper Crystal Reports from Forte. I know that
there
are a number of other people in this same boat, as I've seenmessages
posted here at various points during the past few weeks. We arehaving
a particular problem with getting the compile to go through, whichwe
have sent in to Forte Tech Support. I'm forwarding the message Isent
Tech Support to this group in the hopes that someone here mayhave
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc.
[email protected]
>
>>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / AlaiahChandrashekar
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to
Crystal
>>
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after aday
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message foreach
of the functions we are trying to wrapper. We have tried a numberof
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someonecall
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092-----------------------------------------------------------------------------------
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
[email protected]------------------

Why if using a composition widget as a dropdown target links fade if they extend over a text area

I am working on a site using the composition widget for a drop down menu. I find that if the target links extend over a text area, they fade out before one can click the link and while this can be overcome for desktop and tablet layouts, it cannot for phone layouts. The link below shows the issue. Any suggestions?
Sandy Paws || Contacts

Hi, No luck sorry! I have posted this a few times in the forum and also as a bug but no reply from Adobe! Really annoying as Im having to do a total redesign as a result and its not ideal. If you do manage to work it please do let me know!
ADOBE PLEASE RESPOND!

Pro*C linker problems

System is Linux Mandrake 6.0 with Oracle 8i, with the 8i patch
applied.
What a nightmare that install was! Lots of permission problems,
unreadable directories, programs with no execute permission on
them and so on.
I now have a database up and running, and am trying to get Pro*C
working. The code was written on RedHat 5.2 with Oracle 8.0.5,
and worked fine there, so I know it is not a fundamental code
problem!
I have patched the pcscfg.cfg file as detailed in the patch FAQ
(with modifications for the slightly different paths under
Mandrake Linux).
When I compile the Pro*c file, I get many "undefined reference
to 'dbcon'" and "undefined reference to 'ctx'" errors from the
linker. This occurs whether I use a pre-defined list of specific
libraries in my own Makefile, or if I use the standard
demo_proc.mk makefile. I have used nm(1) on every place I can
think of, to try to find the required library/object, but to no
avail.
I appreciate that Oracle have so far only certified Oracle for
Linux against Redhat 6.0, but surely Mandrake can't be THAT
different ;-)
Does anybody have any ideas, known problems etc? I REALLY HOPE
that I don't have to switch to Redhat as the only solution - no
problem with Redhat, it would just require a tedious and
complicated system rebuild, which I don't have the time to do :-(
TIA
Mike Holden
null

Robert B gin (self) (guest) wrote:
: Robert B gin (guest) wrote:
: : Since I've last posted, I've installed RedHat 5.2 and
ditched
: : Slackware!
: : (btw, what a breeze - Hat's off to RH! very nice install!).
: : I've then installed oracle, have managed to setup
tnsnames.ora
: : so I can connect via sqlplus to my remote database (on
: VAX/VMS).
: : But now I have Pro*C linker problems with:
: : make -f demo_proc.mk build OBJS=test.o exe=test
: : (blah,blah,blah)
: : /usr/lib/crt1.o(.text+0x36): undefined reference to `main'
: : make: *** [build] Error 1
: : Does anybody out there have a similar problem?
: : Rob
: Duh! forget it... (EXE has to be caps... RTFM)
: (cryptic error message though?)
: works great!!!
Could you please tell me where I can get demo_proc.mk file
for Linux (RedHat)?
Thanks
null

OCCI Link Problem

Hi,
I am using Oracle 9.2.0.1.0, Redhat 9, gcc 2.96, glibc 2.3.2-11.9. I continually receive the following link problem:
/usr/bin/ld: warning: libclntsh.so, needed by /opt/ora9/product/9.2//lib/libvdc.so, not found (try using -rpath or -rpath-link)
/opt/ora9/product/9.2//lib/libocci9.a(occiUtil.o)(.text+0x99f): In function `oracle::occi::toUpperCase(basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> > const &)':
: undefined reference to `__ctype_toupper'
collect2: ld returned 1 exit status
Can anyone assist in resolving this issue?
Thanks
JD

Removed libocci9 and it compiled.
JD

Frame in frame with graphics problem-or maybe not

Hi from Croatia.
Well I have and extremely demanding costumer that wants to control every single bit of the project.
The problem is as follows.
I have a book that every once in a wile has annotation which above and bellow has a graphic line (not simple line but complex graphic imported from illustrator.)
I tried to anchor one object above and another bellow this text which lets say stands in the middle of text frame and for me everything works ok.
But this demanding customer wants that those annotations are in separate frame so that he can have full control over them(?).
So I made frame in frame-put wrapping around this smaller frame.
The problem is- is it possible to put those graphics in this smaller frame, create text object and add it to library so that i can use it multiple times. I have more than hundred of those annotations.
And is it possible when i cut the text from this main frame to paste it in this smaller one and that this small frame automatically fills with text so that frame expands vertically according with amount of text. I am not placing text but pasting. I hope you have understood but in every case here is an example.
Main text frame(text fills full width of page)
sadbhjasdsdab
sagsafgsfgafsd
agsfgfasg
(Now smaller frame with graphic fills full width of main frame)
ewfewtf
agasg
sdagasdga
(text fom main frame continues)
fasdfs
dsgasgasg
dfgdfsg
dfsgsd
Uf this was exhausting even for me.
THX for any help.

I tried to use 3 row table with header and footer, but the problem is that indesign does not allow tables to break when the part of table goes to another page.
And THX for in for on those plugins.

Dynamically changing frame target

hi
i want set the frame target of a form -tag depending on the value selected from the user. is this possible by setting the response header appropriatly ( and how should i set it).
another possibility should be using javascript and onSubmit in the form, but i use jakarta struts framework and i do not know how i could do this with javascript.
please help me

aha you want the javascript...
I presume you defined something like this:<html:select property="mySelect" ...>
</html:select>Here is how you access it:...
theForm = document.forms[0];
selValue = ziForm.mySelect.options[theForm.mySelect.selectedIndex];
var dynamicAction;
if (selValue == <choice 1>)
    dynamicAction = '<url 1>';
else if (selValue == <choice 2>)
    dynamicAction = '<url 2>';
else if (selValue == <choice 3>)
    dynamicAction = '<url 3>';
theForm.action = dynamicAction;
...Could have some errors but that's the idea...
Regards,
Anton

Html link problem...

Hey!
Just wanned to say to those who answered my post on html link problems, that the problems I had were actualy because of the jdk version! I had jdk1.2 and now I have 1.3 and it works just fine.
thanx a lot to everyone who tried to help!!!

hehe i saw the topic "html link problem" posted by amidala and i thought " oh my god is she still struggling!" ;P
Kewl 'twas not a problem!

OCCI Link problem (Error LNK2019: unresolved external symbol) in VS2012

Hi,
I'm having a hard time with this. I'm trying to implement OCCI within my application. Error I'm getting is:
Error     1     error LNK2019: unresolved external symbol "public: static class oracle::occi::Environment * __cdecl oracle::occi::Environment::createEnvironment(class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > const &,class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > const &,enum oracle::occi::Environment::Mode,void *,void * (__cdecl*)(void *,unsigned int),void * (__cdecl*)(void *,void *,unsigned int),void (__cdecl*)(void *,void *))" (?createEnvironment@Environment@occi@oracle@@SAPAV123@ABV?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@0W4Mode@123@PAXP6APAX2I@ZP6APAX22I@ZP6AX22@Z@Z) referenced in function "private: bool __thiscall ServerDataLoader::getPreSuffixesFromDB(void)" (?getPreSuffixesFromDB@ServerDataLoader@@AAE_NXZ)     P:\code\VizTool\VizPortal\DwgDgnConverter\ServerDataLoader.obj     DwgDgnConverter
Error     2     error LNK1120: 1 unresolved externals     P:\code\VizTool\VizPortal\Debug\DwgDgnConverter.exe     1     1     DwgDgnConverter
Yes, it looks like linking problem,...but for me everything seems set-up.
- Included header files (from instantclient-sdk-windows.x64-11.2.0.3.0.zip)
- Included library path from OCCI download (11.2.0.3.0)
- Added oraocci11d.lib in linker
Please, what am I doing wrong?
Millions of thanks for any kind of feedback ;-)

Have you succeeded? I tried vs2012 and it passed compilation, but gave the run-time error of _crtisvalidheappointer. But the same code runs well with vs2010. I think Oracle needs to publish the new patch for vs2012

Element link problem in datamodel

Hi,
We created 2 datasets in Datamodel, When we tried to put element level links for both the datasets , its showing error when we generate sample xml.
The error is displayed as shown below:
XML Parsing Error: no element found
Location: http://localhost:9704/xmlpserver/servlet/xdo
Line Number 4, Column 1:
Also in bipublisher.log file, i'm getting this error:
*[2012-03-02T10:54:01.438+05:30] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 38] [userId: <anonymous>] [ecid: 4b1d6eaff3f572e1:6d93021e:135c76b9078:-8000-0000000000015be5,0] [APP: bipublisher#11.1.1] java.sql.SQLException: java.io.IOException: prepare query failed[nQSError: 43113] Message returned from OBIS.[[*
*[nQSError: 27002] Near <=>: Syntax error [nQSError: 26012] .*
the column which 'm trying to link is having same datatype as VARCHAR only.
What should be done for this error? can anyone help in this issue?
Thanks & Regards,
Surya

Thanks for the response Thomas!
The functionality seems to work just fine. I use the LINK PROBLEM and it pops up the problem search box, I search for and select a Problem, I then select it and click ok, and I get no error saying the relationship was not created.
The problem is, when I open the problem after that, there is never any relationship showing in related items there, as it says there should be.
Also, to point out, I am talking about newly created Incidents. I tried even using APPLY prior to doing the LINK PROBLEM but it still did not work. I suspect it may be a workflow problem, where the workflow to create the incident has not completed, there
for the relationship is not completed.... and I get no error.
In my work environment, we have analysts during outages taking a call every 30 seconds, and I need a more efficient way for this system to work. As of now, they spend 1-2 minutes doing the ticket, and that is too long.
I have decided to try a newb way, where I created an Incident (GENERIC OUTAGE) that folks can use, and every 15-30 minutes during an outage, I can open the problem and search for open incidents with that title, and attach all that I find from the problem
side. This is assuming that once attached they will not show up in the search to attach the next time lol. Also this assumes that if attached from the problem, they will auto resolve when the problem is resolved.
I am rusty on my programming, and am currently trying to get refreshed. I am sure that would come in handy for this :)
Oh and lastly, one additional tidbit that will make this clearer, with regard to work flow, we re also running our Service Manager in our help desk, virtualized, as they have not upgraded to Win 7 yet :(. So that compiles my time to add ticket issue :(.

Frames Target Link problem

Similar Messages

Maybe you are looking for