Framework Class CL_RSRD_PRODUCER_PRECALC type PROD delivers no document

Hi
Im working in Query Designer and go to option Publish - BEx Broadcaster
I create a new timing of an e-mail transmission with PDF, If I will carry out, then I get the message "framework Class CL_RSRD_PRODUCER_PRECALC type PROD delivers no document"
However the MHTML I have no problem.
In detail the issue
Settings were launched from BEx Broadcaster Started
Q221070 for processing user Spracche DE
The recruitment process
framework Class CL_RSRD_PRODUCER_PRECALC type PROD delivers no document
How do I resolve this issue
Regards
Naziem

Hi,
In Broadcaster, few settings needs to configured.
But before that please run that particular query in RSRT and then broadcast it.
Hope this will help.
Thanks,Rams.

Similar Messages

Error occurred during processing of framework class CL_RSRD_DISTRIBUTOR_MAI

Hi Experts,
I am sending query through broadcasting, i am getting following error. how can i solve this?
Error of type CERR_BCS occurred sending document ZQUERY1.zip
Error occurred during processing of framework class CL_RSRD_DISTRIBUTOR_MAIL, type DIST
Thanks,
Venky

Hello Experts,
We are getting frequently following errors and failure very frequent in broadcasting. How can we solve this problem of failure in broadcasting?
Error: java.lang.NullPointerException
You do not have the authorization for component
Error: java.lang.NullPointerException
Java system error: Exception in method processFunction.
Error: com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException
Thanks,
Venky

Valuation Class, Material Type, Movement Types

Hey Gurus... pls help me out with Valuation Class, Material Type, Movement Types, Assignment of Movement types to T-keys (T-code OMJJ), Value string (I also need some information on this) , OMWN and OMWB transactions, VA01 and automatic account assignment
Thanx, Points will certainly be assigned to one who answers all my queries.
Tina

Valuation Class is determines your type of matrial Following are the some example of valuation class
3000---WP Raw material
7900--WPSemifinished material
7920--Finished material
These are the some exmaples.
Please set material type - valuation class settings in:
SPRO > Material Management > Valuation and Account Assignment > Define Valuation Classes
Check link
http://help.sap.com/saphelp_46c/helpdata/en/1e/1a39516e36d1118b3f0060b03ca329/frameset.htm
Material Type
Movement Types
Movement type is to differentiate between the various goods movements.
Some of the goods movement are
261 Goods Issue for Prod Order
101 Goods receipt for Prod order/Purchase order
Goods movement has many control functions attached to it
Material/Accounting documents are generated
It updates the quantity fields
It updates the stock & consumption accounts
T-code to create Movement Type: Transaction OMJJ
Value String is a Tool which is used in Automatic acc.Determination to Trigger the Transaction Event Key....based on Movement Type,Special Stock Indicator,Qty.Updating of the material,Value Updating of the material,Movement Indicator and Consumption Indicator of the Transaction.
Hope this will clear you about your querries

Change the class and type in javascript or select statement of region

Application Express 3.2.0.00.27
I have a manually created tabular form where I need pk to be updatable or not not updateable depending on whether its a new record or not.
I am attempting this thru 2 different ways.
1st:
using decode in select statement of region:
SELECT decode(c001,NULL,APEX_ITEM.POPUP_FROM_LOV(15,c001,'AUTH_LOV',NULL,NULL,0,NULL,NULL,NULL,'YES','f15_' || '#ROWNUM#'),
apex_item.display_and_save(15,c001,'f15_'|| '#ROWNUM#')) authid,
apex_item.hidden(16, c002, NULL,'f16_'|| '#ROWNUM#') empid,
-- apex_item.display_and_save(16,c002,'f16_'|| '#ROWNUM#') empid,
apex_item.date_popup(17, rownum, c003, 'DD-MON-YYYY',20,2000,NULL,'f17_' || '#ROWNUM#')deldate,
apex_item.textarea(18,c004,5,40,NULL,'f18_'|| '#ROWNUM#') "Delegation scope",
apex_item.textarea(19,c005,5,40,NULL,'f19_'|| '#ROWNUM#')"Delegation limits",
apex_item.select_list_from_lov(20,c006,'YESNO_LOV',NULL,'NO','N','%','f20_'|| '#ROWNUM#')"ORA Signed",
apex_item.date_popup(21, rownum, c007, 'DD-MON-YYYY', 20,2000,NULL,'f21_' || '#ROWNUM#') "Del expiry",
apex_item.date_popup(22, rownum, c008, 'DD-MON-YYYY', 20,2000,NULL,'f22_' || '#ROWNUM#') "Date removed",
apex_item.textarea(23,c009,5,40,NULL,'f23_'|| '#ROWNUM#') "Delegation comments",
apex_item.POPUP_FROM_LOV(24,c010,'DELEGATION_LOV',NULL,NULL,0,NULL,NULL,NULL,'YES','f24_' || '#ROWNUM#') "Delegator",
apex_item.display_and_save(25,c011,'f25_'|| '#ROWNUM#') status,
-- apex_item.display_and_save(26,seq_id,'f26_'|| '#ROWNUM#') seq_id,
apex_item.hidden(26, seq_id,NULL,'f26_'|| '#ROWNUM#') ||
apex_item.checkbox(27, seq_id,NULL,NULL,':','f27_'|| '#ROWNUM#') chkbx
FROM apex_collections
WHERE collection_name = 'DELEG_COLL'
AND c011 IN ('O','N','U','D')
--order by c001However this approach yields this error when I try to pick a value from the lov:
Error: Can't move focus to the control because it is invisible, not enabled, or of a type that does not accept the focus.
My other approach is to attempt to change the type and class in javascript. I am trying this but I get an error when I attempt to change the class and type like this:
<script type="text/javascript">

</script>

not completely duplicate...here in this thread I am stressing what I am trying to accomplish and asking for help on the javascript side.

Cannot create class of type 'flex.samples.factories.SpringFactory'

I have an application that is trying to use BlazeDS. I am using Flash Builder 4 Plug-in on RSA 7.5.5. Any help would be apprecialted!
Here is the relevant lines in the services-config.xml:
<factories>
<factory id="spring" class="flex.samples.factories.SpringFactory"/>
</factories>
I have the flex.samples.factories.SpringFactory in the web projects src folder and verified that it is getting compiled and the class exists in the WEB-INF/classes folder.
Here is the full stack trace:
[5/31/11 8:54:44:530 CDT] 00000018 SystemErr R **** MessageBrokerServlet failed to initialize due to runtime exception: [1]flex.messaging.MessageException: Cannot create class of type 'flex.samples.factories.SpringFactory'. Type 'flex.samples.factories.SpringFactory' not found.
at flex.messaging.util.ClassUtil.createClass(ClassUtil.java:65)
at flex.messaging.util.ClassUtil.createClass(ClassUtil.java:47)
at flex.messaging.config.FactorySettings.createFactory(FactorySettings.java:55)
at flex.messaging.config.MessagingConfiguration.createFactories(MessagingConfiguration.java: 114)
at flex.messaging.config.MessagingConfiguration.configureBroker(MessagingConfiguration.java: 93)
at flex.messaging.MessageBrokerServlet.init(MessageBrokerServlet.java:125)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.init(ServletWrapper.java:220)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.init(ServletWrapper.java:328)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:1252)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:161)
at com.ibm.wsspi.webcontainer.extension.WebExtensionProcessor.createServletWrapper(WebExtens ionProcessor.java:99)
at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:882)
at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:804)
at com.ibm.ws.webcontainer.webapp.WebApp.initializeTargetMappings(WebApp.java:522)
at com.ibm.ws.webcontainer.webapp.WebApp.commonInitializationFinish(WebApp.java:359)
at com.ibm.ws.wswebcontainer.webapp.WebApp.initialize(WebApp.java:337)
at com.ibm.ws.wswebcontainer.webapp.WebGroup.addWebApplication(WebGroup.java:92)
at com.ibm.ws.wswebcontainer.VirtualHost.addWebApplication(VirtualHost.java:157)
at com.ibm.ws.wswebcontainer.WebContainer.addWebApp(WebContainer.java:666)
at com.ibm.ws.wswebcontainer.WebContainer.addWebApplication(WebContainer.java:619)
at com.ibm.ws.webcontainer.component.WebContainerImpl.install(WebContainerImpl.java:395)
at com.ibm.ws.webcontainer.component.WebContainerImpl.start(WebContainerImpl.java:611)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:1304)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedAppl icationImpl.java:1165)
at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:587)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:8 32)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java: 950)
at com.ibm.ws.runtime.component.ApplicationMgrImpl$AppInitializer.run(ApplicationMgrImpl.jav a:2131)
at com.ibm.wsspi.runtime.component.WsComponentImpl$_AsynchInitializer.run(WsComponentImpl.ja va:342)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1473)
[0]flex.messaging.config.ConfigurationException: An error occurred trying to construct FlexFactory 'flex.samples.factories.SpringFactory'. The underlying cause is: 'flex.messaging.MessageException: Cannot create class of type 'flex.samples.factories.SpringFactory'. Type 'flex.samples.factories.SpringFactory' not found.'.
at flex.messaging.config.FactorySettings.createFactory(FactorySettings.java:72)
at flex.messaging.config.MessagingConfiguration.createFactories(MessagingConfiguration.java: 114)
at flex.messaging.config.MessagingConfiguration.configureBroker(MessagingConfiguration.java: 93)
at flex.messaging.MessageBrokerServlet.init(MessageBrokerServlet.java:125)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.init(ServletWrapper.java:220)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.init(ServletWrapper.java:328)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:1252)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:161)
at com.ibm.wsspi.webcontainer.extension.WebExtensionProcessor.createServletWrapper(WebExtens ionProcessor.java:99)
at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:882)
at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:804)
at com.ibm.ws.webcontainer.webapp.WebApp.initializeTargetMappings(WebApp.java:522)
at com.ibm.ws.webcontainer.webapp.WebApp.commonInitializationFinish(WebApp.java:359)
at com.ibm.ws.wswebcontainer.webapp.WebApp.initialize(WebApp.java:337)
at com.ibm.ws.wswebcontainer.webapp.WebGroup.addWebApplication(WebGroup.java:92)
at com.ibm.ws.wswebcontainer.VirtualHost.addWebApplication(VirtualHost.java:157)
at com.ibm.ws.wswebcontainer.WebContainer.addWebApp(WebContainer.java:666)
at com.ibm.ws.wswebcontainer.WebContainer.addWebApplication(WebContainer.java:619)
at com.ibm.ws.webcontainer.component.WebContainerImpl.install(WebContainerImpl.java:395)
at com.ibm.ws.webcontainer.component.WebContainerImpl.start(WebContainerImpl.java:611)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:1304)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedAppl icationImpl.java:1165)
at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:587)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:8 32)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java: 950)
at com.ibm.ws.runtime.component.ApplicationMgrImpl$AppInitializer.run(ApplicationMgrImpl.jav a:2131)
at com.ibm.wsspi.runtime.component.WsComponentImpl$_AsynchInitializer.run(WsComponentImpl.ja va:342)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1473)
Caused by: flex.messaging.MessageException: Cannot create class of type 'flex.samples.factories.SpringFactory'. Type 'flex.samples.factories.SpringFactory' not found.
at flex.messaging.util.ClassUtil.createClass(ClassUtil.java:65)
at flex.messaging.util.ClassUtil.createClass(ClassUtil.java:47)
at flex.messaging.config.FactorySettings.createFactory(FactorySettings.java:55)
... 27 more

You can download it here:
http://code.google.com/p/rapid-framework/source/browse/trunk/rapid-framework/src/rapid_fra mework_common/cn/org/rapid_framework/flex/messaging/factories/SpringFactory.java
Am 16.08.2010 um 21:42 schrieb ZéSóZé:
Sorry http://forums.adobe.com/people/PHANTOMIASA,
>
but I need to write what?
>
Where is the attached file?
>
Thanks for quick answer...
>
Best regards..
>
José.
>

FI-CA document type when a print document is created

Hello everybody,
We have been searching events (e.g. 0061)/user-exit to change the FI-CA document type when a print document (based on our own logic) is created with transaction EASIBI without success. Maybe you have enhanced something in another project. Can you share you experiences?
Thanks in advance.
Fernando.

We have enhanced event R999.

Table for output type of a delivery document

Hi guys,
Would you know where could I find the output type of a delivery document espcially after I posted a GI in Shipment? Basically, It should reflect in devlivery document. So I am not sure if I should look at the delivery tables or goods issue.
Help me guys!
POints for the helpful ideas.
THanks!

Hi,
There are 2things to be noted here.
1. If your output type was already triggered once, then it should be visible in display mode also, with a Green colour button (if it is processed and the print out is obtained). The fact that the output type is not seen in display mode, says that the output type so far has nto been triggered.
2. Seeing the output type coming in yellow colour in change mode of delivery document is expected. This means that the output is getting triggered now.If you save teh document now, you will get the print out.When you go in display mode again after a gap of say 1min, you can see the same output in Green colour as mentioned earlier.
I hope this clarifies your doubt.Please let me know if you need some more info
You can reward me if it helped you

With Pages 5.2 how can i use multiple language types in a single document

My Macbook Air Has the version 10.9.3
I'm used to work with the old version of Page.
But now I am using the new version of Pages 5.2 (1860).
I want to know with the new version how do I use an multiple language types in a single document option.
In the old version of Pages I was using Inspector -> Text -> "More" tab -> Language: British Inglese.
In the new Pages 5.2 I do not know how to do it
Could you help me?
melo

It's not possible to tag text with multiple languages in Pages 5. Go back to Pages 4, which should still be in you iWork folder.
For the whole doc in Pages 5, use Edit > Spellling and Grammar > Show Spelling and Grammar.

Output type determination in Billing document

Hi,
I have a query reg automatic determination of output type in the billing document. The scenario is, For an invoice, two output types are determined automatically for all invoices. But the third output type is determined based on Shipping point. For Example say, output type IFIB should be determined if Sh.pt is A and IFIT if sh.pt is B. This is controlled thru "Requirement" assigned to the output types in output det procedure.
The problem is, for a particular document IFIB appears though the sh.pt is B, Now i have to find out whether it is determined automatically or manually. I have checked the following
1. The "manually changed" field is not flagged in the "further data" of this output type. I believe, if it is not ticked, then the output type is determined automatically and no manual change was carried out. Am I right?
2. When i checked the "determination analysis", I find that the output type with the message "Output ignored (Requirement not fulfilled)". If the output was determined automatically, then "output xxx found" should appear right? When the analysis says it is ignored, then how come it can appear automatically?
I am confused over this contradictory findings. Plz tell me whether my assumptions stated above are right. Kindly suggest me alternative ways to find out whether it is determined automatically or manually? If it is determined automatically, on what conditions?
Thanks in advance
Suresh

Hi Suresh,
In an output determination, it may tell u that the output type is ignored because of un-fulfilled requirement, but it will still automatically appear in Header-> output, but u need to check the actuall processing status, whether is 0,1, or 2. I assume for your case it will be 0 (not processed, meant for manual processing instead), 1 (processed) and 2 (error occurred).
Another thing which is essential is that, in order to let the system successfully fulfill your determination criteria, u need to assign output type with correct access sequence, for example 1 access sequence by sales org/billing type for output, another 1 is by sales org/shipping point. Or u can simply create 1 access sequence with 2 condition tables.
After that u need to create condition record for each output type, u do this in t-code VV31.
By rite, during transaction (issue output), system will be able to search for those condition record and output type will be automatically appear, providing if there is any rquirement routine in your output det. proc (appl = V3) returns TRUE.
Cheers,
Benny Andre

How to create a people picker type metadata in a document set?

Hi folks,
I want to create a people picker type metadata in a document
set (it has some content types and it resides inside a library).
So please help me knowing steps for creating it.
Our web application is using classic based authentication therefore I want to retrieve the names and groups in people picker column from Active Directory.
Also, the document set library for which I want to create people picker metadata did not had document set before and documents where saved directly in content types as well as the metadata that now we are making as people picker was before of type Single line
of text.
So, whether after creating it of type people picker, at the time of moving documents into document set, it will create problem? If yes,than of of what kind and how can it be resolved?
Replies will be greatly appreciated.
-Ishita

Hi,
From your description, I know you want to add a people picker column in a document set, then add this document set into a document library.
If you want to add a people picker column in a document set you should create a document set first. You can know how to create and configure a document set by referring to this article: https://support.office.com/en-us/article/Create-and-configure-a-new-Document-Set-content-type-9db6d6dc-c23a-4dcd-a359-3e4bbbc47fc1.
After creating a document set, you can follow these steps below to add a people picker column in a document set: click Site Actions -> Site Settings -> under Galleries section, Site content types -> find the content you want to add people
picker column -> under Columns section, Add from new site column -> Name and Type, enter your column name and choice Person or Group -> OK.
If you move documents into document set, it will keep the current properties. You can edit properties to change the document to another content type which is contained in the document set.
In my case, DocA is the content type of the document library, Document and DocB are content types of the document set.
If I have mis-understand, please let me know.
Best Regards

How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item

Dear Experts:
could you please share with me the knowledge for below topic:
How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item, because these three objects use three different pricing procedures, and different condition type.
how did the condition type of service entry sheet know to copy the value of whcih condition type in the pricing procedure of shipment cost document?
Is this SAP standard function OR there need an enhancement to do that?
I didn’t find related condition value copy setting in background, could you please share related setting with me? Thank you very much for your kind help!
Best regards,
Andy

Hi, Gopi,
Glad to see your feedback, but i still have question on your feedback:
which condition type in the pricing procedure of service entry sheet should know to capture the net value of shipment cost doc? becasue there are so many condition types,
And i have checked the corresponding condition type (PRSX) of service entry sheet pricing procedure in my SAP system, this is a self-defined condition type, but NO any calculation routine maintained for the condition type (PRSX), how did the condition type (PRSX) know to copy the total cost of shipment cost document?
Below is the example and another question:
what the relationship between the pricing procedures at service PO item level and service line item level?
1. The freight cost in shipment cost document—including used condition type and pricing procedure
The pricing procedure of shipment cost document
2. The freight cost in service entry sheet—including used condition type and pricing procedure
The pricing procedure of service entry sheet--the pricing procedure at service line item level
3. The freight cost in service PO item—including used condition type and pricing procedure:

Content type "Link to a Document" to content type Document SET

Hello,
Could you please assist.
I have a customized document sets.
I added the content type "Link to a Document” to content type Document SET.
I uploaded several documents to each document set. There are several identical documents in different document sets.
How can I arrange for uploading just a link to the documents, but not the additional documents?
In other words, how to arrange for convenience for users to download a link?
I mean them not to enter
http://server/files ,
but a certain “dropdown” appeared, a kind of menu with a choice of downloaded documents.
Suppose, I added to each file its own attribute link and this link. I want to present in form of creation “Link to a Document”
There are 2 forms of creation. The first one is where we point a link. The second one is where we point the attributes.
For example:
I have two document sets: Project 1 and Project 2.
There are 2 documents “instruction.doc” and “invoice.xls” uploaded to Project 1. Each document has a field – link (a link to this very document).
I want to add a link to “invoice.xls” in Project 2.
I want to do it in that way a user could choose a list of links from a dropdown menu.
Thanks

Lookup column is the attribute of file. Attribute can not be upload! . Did you try to use the content type of link to document? If yes, you can understand my question. I want to change uploaded.aspx ( link of document) and add lookup column to this form.
Standart scenario: User create link to docunent. 1. Prees button start. 2. Input text link to upload.aspx form 3. Set attributes new. Aspx I want: 1. Press button. 2. User press dropdawn menu and choise neddeng link. 3. Set attributes Plese read my question
again. Sorry for my not good english

Programmatically: Support content types in the gallery and for content types associated with a document library

Hi there,
Help appreciated in programmatically 'Supporting content types in the gallery and for content types associated with a document library'.
Any resources/references or source is greatly appreciated.
Regards,

Hi,
Would you mind providing more details about your requirement? Cause I'm not quite clear about what you really need.
What’s more, there are seems two questions in your post. If you have several questions to ask, I suggest you post them into every single thread to make them easier to be discussed
in the forum.
Best regards
Patrick Liang
TechNet Community Support

Pages won't allow me to type in a new document

I have Pages '09 version 4.3. When I went to open a new document today, the blank new document will not allow me to type in it. I can insert a table and type in that fine, but if I try to just type a list or document, it won't allow me to do anything. The cursor doesn't even appear when I try to click in the document itself. I have restarted and shut down the computer already with no resolution of the problem. Suggestions?

You opened a blank Layout template.
Go back to the Template Chooser and choose a Word Processor template instead. They are listed in the sidebar.
Peter

How to retrieve the content type used in a document library (C# - Client Model).

Hello,
I need to know if it's possible to retrieve the content type used in a document library, so I can know the columns active and used in this document library. I am using the Client Model in C#.
Thanks

First, retrieve your document library as a List object. Then, use the
List.ContentTypes property to iterate through all the content types assigned to the list.
Blog:
blog.beckybertram.com |
RSS | @beckybertram |
SharePoint 2010: Six-in-One

Framework Class CL_RSRD_PRODUCER_PRECALC type PROD delivers no document

Similar Messages

Maybe you are looking for