Framing an item using the Frame Chaeel - PS CS5

Under Window there is Actions and one of the actions is Frame Channel. When I click Fram Chanel nothing happens but it does expand and some stuff is listed below it. Each time I double click one of the listed items again nothing happens. I was wondering what the Frame Channel was to do. Maybe it just doesn't do anything in those trial versions of Photoshop Extender. I am using thePS Extender CS5 trial.
Please explain the correct use of the Frame Channel,

I finnally can frame both photos and graphics. I even figured out how to get a colored frame. Just choose Fill and the color will appear like the example below. However, for the life of me I can not figure out how to get the white out of the saved item. I did one but not sure how I did it.
It is hard to tell since the background of this board is white but there is a large white background when I open in PS,
The best one is this Eagle.

Similar Messages

Add Multiple Detail Items Using the Same Query String Parameter

I am using InfoPath 2010 and SharePoint 2010.
I have 2 forms libraries - Expense and Expense Details.
The 2 libraries are linked via a custom site column Expense ID.
The Expense form contains the main header type info you would typically find on an expense report; e.g., name, purpose, department, etc.
The Expense Details form contains multiple detail expenses related to the main expense report such as airfare, rental car, etc.
I have created a page that displays an expense report with all of the related expense detail items.
The page contains a link to add a new expense detail and passes the Expense ID of the Expense form to the Expense Detail form.
This all works fine. The problem comes in after the first expense detail form is submitted.
I can successfully submit the first detail item. However, the expense detail form loses the Expense ID that was passed to it after the first expense detail form has been submitted.
The parameter still shows in the URL but the detail form no longer shows the value of the parameter.
What do I need to do in order to be able to add multiple expense detail items using the same Expense ID that was passed to the form?
I have tried using a Submit Behavior of Open a new form, Close the form, and Leave the form open.
None of these options give me what I need. Thanks for your help.
pam

Laura Rogers Blog
In case anyone stumbles upon this looking for an answer. Laura Rogers has the answer found in the comments section of her blog above. It’s not the best but it
does work. You have to add an extra Info Path Web Form for it to work. I know, you can roll your eyes.<o:p></o:p>
Steps.<o:p></o:p>
1. Add Query String<o:p></o:p>
2. Add the extra Info Path form to the page. This form will be a hidden on the page and will receive the value from the query string.<o:p></o:p>
3. Add your original Info Path form and have it receive a parameter from the hidden Info Path form.<o:p></o:p>
Now, when you hit save and it opens a new form the 3 Info Path form will function properly. <o:p></o:p>

When using the rectangle tool in CS5, a graph appears in the shape. How do I turn the graph off?

When using the rectangle tool in CS5, a graph appears in the shape. How do I turn the graph off?
Thanks!

It might be the pixel grid if your zoomed in greater than something like 500% to 700%.
Go under View>Show and uncheck Pixel Grid.
Or maybe you have a layer style set in the tool options bar for shape layers.

I used to be able to "turn on a lightbulb" using the gradient tool in CS5. How do I do it with Creative Cloud? It's not the same procedure.

I am accustomed to being able to "light lightbulbs" and make candle flame glow with just using the gradient tool in CS5.
Creative Cloud doesn't work using the same procedures.
Please help.

And what program?
Mylenium

Export to Web: Framed, can you change the frame size/color?

I like the new back forth arrows with the framed feature but would like a smaller frame and maybe black. Is there an option for this?
I can also change it in dreamweaver if someone has a hint on that.
I wish the same front back arrows were on the non framed exports.

If you know HTML you can take some of the controls of the framed version and apply them to the plain version. As far as the frames, they are created by individual files for each side. You would have to modify each frame component in the Resources folder that is created along with the html files.
ADDENDUM:
Have you considered using iWeb to create a photo page? With iWeb you have the option of nearly 80 different frame types as well as any color background.
The standard IWeb has only 24 frames for applying to photos. This application changes the preferences file for iWeb to make available nearly 80 additional frames: Frames and strokes installer for :iWork ’08, iWork ’09, iWeb ’08 et iWeb ’09.
Click to view full size
Be sure to keep the install package as upgrades to iWeb, Pages or Keynote, and possibly updaters, will remove them and you'll have to reapply it go get them back..
OT
Message was edited by: Old Toad

Retrieve Multiple items using the loop

Hi All,
I m using loop for insert the values in the items . The code I used for insertioin is like this :
DECLARE
l_pi_val        NUMBER;
l_count         NUMBER := 0;
l_role_count   NUMBER := 0;
BEGIN
    BEGIN
        SELECT count(*)
        INTO   l_count
        FROM   XXORA_SPO_ADDITIONAL_ROLES
        WHERE spo_number = :P3_SPONSOR_NUMBER;
        EXCEPTION
          WHEN OTHERS THEN
            l_count := 0;
            htp.p('Error in XXORA_SPO_ADDITIONAL_ROLES count - '||:P3_SPONSOR_NUMBER||'-'||SQLERRM);
    END;
    IF l_count = 0 THEN
        BEGIN
                  FOR i IN 1..10
                  LOOP
                        BEGIN
                        IF v('P3_ROLE_'||i) != 'SELECT' THEN
                                HTP.P('Inside IF');
                                BEGIN
                                INSERT INTO XXORA_SPO_ADDITIONAL_ROLES
                                VALUES( :P3_SPONSOR_NUMBER
                                       , v('P3_ROLE_'||i)
                                       , v('P3_CONTACT_'||i)
                                       , v('P3_DEPT_DIV_'||i)
                                       , v('P3_ROLLNO_'||i) );
                                 HTP.P(v('P3_CONTACT_'||i));
                                 HTP.P(v('P3_DEPT_DIV_'||i));
                                 HTP.P(v('P3_ROLLNO_'||i));
                                EXCEPTION
                                WHEN OTHERS THEN
                                    htp.p('Error in Inside Loop in insert into Additional Role - '||i||'-'||SQLERRM);
                                END;
                        END IF;
                        EXCEPTION
                          WHEN OTHERS THEN
                             htp.p('Error in FOR LOOP 1 Additional Role - '||i||'-'||SQLERRM);
                        END;
                  END LOOP;
                  EXCEPTION
                  WHEN OTHERS THEN
                      htp.p('Error outside the loop in insert into Additional Role - '||:P3_SPONSOR_NUMBER||'-'||SQLERRM);
          END;
   ELSE
          BEGIN
                  FOR i in 1..10
                  LOOP
                      BEGIN
                          SELECT count(*)
                          INTO   l_role_count
                          FROM   XXORA_SPO_ADDITIONAL_ROLES
                          WHERE spo_number = :P3_SPONSOR_NUMBER
                          AND   ROLE_NO    = v('P3_ROLLNO_'||i);
                          EXCEPTION
                            WHEN OTHERS THEN
                              l_count := 0;
                              htp.p('Error in XXORA_SPO_ADDITIONAL_ROLES role count - '||:P3_SPONSOR_NUMBER||'-'||SQLERRM);
                      END;
                      IF l_role_count <> 0 THEN
                          IF v('P3_ROLE_'||i) <> 'SELECT' THEN
                               BEGIN
                                   UPDATE XXORA_SPO_ADDITIONAL_ROLES
                                   SET ROLE        = v('P3_ROLE_'||i)
                                       , CONTACT_NAME = v('P3_CONTACT_'||i)
                                       , DEPT_DIV_NAME = v('P3_DEPT_DIV_'||i)
                                   WHERE SPO_NUMBER = :P3_SPONSOR_NUMBER
                                   AND   ROLE_NO    = v('P3_ROLLNO_'||i);
                                   EXCEPTION
                                   WHEN OTHERS THEN
                                        htp.p('Error in Update inside loop into Additional roles - '||:P3_SPONSOR_NUMBER||'-'||SQLERRM);
                               END;
                           ELSE
                               BEGIN
                                   DELETE FROM XXORA_SPO_ADDITIONAL_ROLES
                                   WHERE ROLE_NO = v('P3_ROLLNO_'||i)
                                   AND SPO_NUMBER = :P3_SPONSOR_NUMBER;
                                   EXCEPTION
                                   WHEN OTHERS THEN
                                        htp.p('Error in Inside delete loop into Additional roles - '||:P3_SPONSOR_NUMBER||'-'||SQLERRM);
                               END;
                           END IF;
                      ELSE
                          IF v('P3_ROLE_'||i) != 'SELECT' THEN
                                  BEGIN
                                  INSERT INTO XXORA_SPO_ADDITIONAL_ROLES
                                  VALUES( :P3_SPONSOR_NUMBER
                                         , v('P3_ROLE_'||i)
                                         , v('P3_CONTACT_'||i)
                                         , v('P3_DEPT_DIV_'||i)
                                         , v('P3_ROLLNO_'||i) );
                                   HTP.P(v('P3_CONTACT_'||i));
                                   HTP.P(v('P3_DEPT_DIV_'||i));
                                   HTP.P(v('P3_ROLLNO_'||i));
                                  EXCEPTION
                                  WHEN OTHERS THEN
                                      htp.p('Error in Inside Loop in insert into Additional Role - '||i||'-'||SQLERRM);
                                  END;
                          END IF;
                      END IF;
                  END LOOP;
            EXCEPTION
                     WHEN OTHERS THEN
                         htp.p('Error in Update outside loop into Additional Roles - '||:P3_SPONSOR_NUMBER||'-'||SQLERRM);
          END;
    END IF;
    COMMIT;
END;Now what i want is to retrieve the values from the database and keep the values in the respective fields when i am loading the page using a primary key, i need to fetch the data from the database.

Not in association Johan no.
You can have one "Family" login they all use to log in but it will kick one out if the other logs in and of course, multiple people sharing the same login increases the security risk.
You can only set one owner as well.

Query Publisher items using the PRC Search API

Does anyone know if it is possible to query Publisher items from the PRC API? In my tests, even if I leave the filters blank and do a generic search for '*' I don't get Publisher items back. (Doing the same generic search from the portal does return Publisher items.) I'm afraid I might have to use the server search api, which I would rather not do. Anybody have experience with this one way or the other?
Thanks
DJ Dewey | VHA Inc. | [email protected]

Hello Peter,
Thank you for your question.
We are currently looking
into this issue and will give you an update as soon as possible.
Thank you for your understanding
and support.
Best Regards,
Zhengyu Guo
Zhengyu Guo
TechNet Community Support

Saving a Template BOM Item using the oInventoryGenEntry object

Hi
I am trying to do a Good Receipt using the DI Object, It always works if the item is not a BOM object but if its a BOM parent I get an error :Item is not set as Inventory Item. The error continues to show me that the problem occurred on an Item that is a child Item of the BOM, This happens especially when the BOM TreeType is Template. According to my understanding, As long as he parent Item of the BOM is set as inventory Item, every item should work fine.
I can't set the child items as Inventory items because they are just components to build the parent Item.
Please help. How can I solve this
Private Function UpdateStock() As Integer
        Dim oAdjustmentIn As SAPbobsCOM.Documents
        Dim txtItemCode As SAPbouiCOM.EditText
        Dim txtStdCost As SAPbouiCOM.EditText
        Dim txtSize1 As SAPbouiCOM.EditText
        Dim txtSize2 As SAPbouiCOM.EditText
        Dim txtExtQty As SAPbouiCOM.EditText
        Dim errDescript As String
        Dim Result As Integer
        Dim CurrentStock As Double
        Dim iRow As Integer
        Dim tmp As String
        Dim i As Integer
        Dim StkItem As String
        Dim GLAccount As String
        Try
            oAdjustmentIn = oDICompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
            oAdjustmentIn.DocDate = Now
            oAdjustmentIn.Reference2 = "2"
            oAdjustmentIn.JournalMemo = "Adjustment In"
            'oAdjustmentIn.PaymentGroupCode = "1"
            oItem = oAdjustmentInForm.Items.Item("13")
            oMatrix = oItem.Specific
            txtItemCode = oMatrix.Columns.Item("1").Cells.Item.oMatrix.RowCount).Specific
            If txtItemCode.Value = "" Then
                i = oMatrix.RowCount - 1
            Else
                i = oMatrix.RowCount
            End If
            For iRow = 1 To i
                DocType = New PGG_IBT(mo_ParentAddon)
                txtItemCode = oMatrix.Columns.Item("1").Cells.Item(iRow).Specific
                StkItem = txtItemCode.Value
                oAdjustmentIn.Lines.ItemCode = StkItem
                oAdjustmentIn.Lines.AccountCode = GLAccount
                oAdjustmentIn.Lines.Quantity = 2
                oAdjustmentIn.Lines.Price = myPrice
                If iRow <> i Then
                    oAdjustmentIn.Lines.Add()
                End If
            Next
            Result = oAdjustmentIn.Add()
            If Result <> 0 Then
                errDescript = oDICompany.GetLastErrorDescription()
                SBO_Application.MessageBox("Error creating interbranch Receive " & errDescript)
            End If
           UpdateStock = Result
        Catch ex As Exception
           UpdateStock = -1
            SBO_Application.MessageBox("Error in Class PGG_Inventory, function UpdateStock() " & ex.GetBaseException.ToString)
        Finally
            GC.Collect()
        End Try
    End Function

Hi Ian
Thanks for the insight, how ever, if I do a Goods Receipt direct in SAP Business One, the Item saves nicely and everything works. It even looks as though the BOM child items are not affeted. But when I use the DI object I then get an error, I don't know what the DI Object is doing different from what SB1 is doing.
There is no doubt in my mind that the Template BOM item can be saved with the Goods Receipt because I am doing it direct in SBO client and it works. I just need to be able to do it via the Di Object
Please help if you can think of another reason why this is happening
Regards
Dumisani

Read only text Items uses the maximum width

Folks,
I have a form with 3 regions and each region has 6 or more text items each with a different width (40, 30 24, 2...). I am using a Read Only Condition Type on all these items to disable them. I am setting the background color as bgcolor="#DCDCDC" in the Read Only Element Table Cell Attributes.
All my elements are disabled (Gray color) but with the maximum width of 40 bytes. I don't want a 2 byte text item 40 bytes long and grayed out. How can I set a specific width for individual items in Read only Condition? Please help
Thanks
Raje.

Try this alternative by disabling the HTML Form Item at the required process point.
I added this JavaScript to the HTML Header of the page which will allow me to disable the required item, plus set its background and color:-
<script language="JavaScript1.1" type="text/javascript">
    function disableFormItem(p_item, p_background, p_color){
                    disItem = document.getElementById(p_item);
                    disItem.style.background = p_background;
                    disItem.disabled = true;
                    disItem.style.color = p_color;
</script>In the Region Footer of the Region where my items are located I added this JavaScript code:-
<script language="JavaScript" type="text/javascript">
   ** Only disable the required Form Items if the Primary Key value is present,
   ** in this case it is P12_UEI. (Won't be present for new records as populated
   ** by on-insert db trigger and sequence.)
   if (html_GetElement('P12_UEI').value > 0)
      disableFormItem('P12_URESI', 'lightyellow', 'black');
      disableFormItem('P12_UZI', 'lightgray', 'black');
      disableFormItem('P12_UBI', 'lightgray', 'black');
</script> The resulting page is a lot better looking than using the APEX read only text item.
Regards,
Phil

How place items using the DTW in three warehouse

I have been trying to use the DTW to place exisiting items in new warehouse after after forgeting to turn on the Auto add option.I have been trying to create the templates to no avail it keeps giving errors-"DTW import error - value too long in property 'warehouse' of item warehouseinfo"
The template looks like this since they are 2 file i am using
Recordkey,itemcode,warehouse
recordkey,itemcode,whscode
second file
Recordkey,linenum,Warehouse

Hi Samuel...........
You should use OITM-Items and OITW-WarehouseInfo DTW templates in order to insert new warehouse into the items.
Once you fill up both the template run it together...........
Put the recordkey common in both the templates so that it would be compared.
Regards,
Rahul

JScrollPane: select items using the keyboard

Hello.
I would like to select items just using the (keyboard) arrow keys and shift/ctrl.
I had a JList that behaved as expected, but I put it into a JScrollPane to get the scroll.
Now arrow keys do scroll the list, but they do not select its items.
How can I do it?
Thank you.

* List_Demo.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class List_Demo extends JFrame {
    public List_Demo() {
        initComponents();
    private void initComponents() {
        setTitle("List Demo");
        setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
        setSize(400, 300);
        setLocationRelativeTo(null);
        scrollPane = new JScrollPane();
        list = new JList();
        listmodel = new DefaultListModel();
        list.setModel(listmodel);
        toolBar = new JToolBar();
        textField = new JTextField();
        okButton = new JButton();
        list.addListSelectionListener(new ListSelectionListener() {
            public void valueChanged(ListSelectionEvent evt) {
                listValueChanged(evt);
        scrollPane.setViewportView(list);
        getContentPane().add(scrollPane, BorderLayout.CENTER);
        toolBar.setFloatable(false);
        textField.setText("textField");
        toolBar.add(textField);
        okButton.setText("OK");
        okButton.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent evt) {
                okButtonActionPerformed(evt);
        toolBar.add(okButton);
        getContentPane().add(toolBar, BorderLayout.NORTH);
        list.requestFocus();
    private void listValueChanged(ListSelectionEvent evt) {
        System.out.println(list.getSelectedIndex());
    private void okButtonActionPerformed(ActionEvent evt) {
        listmodel.addElement(textField.getText());
        list.requestFocus();
    public static void main(String args[]) { new List_Demo().setVisible(true);   }
    private JButton okButton;
    private JList list;
    private DefaultListModel listmodel ;
    private JScrollPane scrollPane;
    private JTextField textField;
    private JToolBar toolBar;
}

How to use the frame viewer?

I've been watching some tutorial videos and wondered how they take a frame from two clips, and put them in the frame viewer. One half of the image is from one clip, the other, another. How do I do this? Thanks.

The frame viewer has 2 drop down menus at the lower left and right corners. The left menu has a green icon, and the right menu has a blue icon. These icons correspond with the frame boundary indicator in the frame viewer window.
The view options that are included in the drop menus are:
-2nd Edit Back: Displays the frame of the Out point two edits back.
-Previous Edit: Displays the frame of the Out point one edit back.
-Current Frame: Displays the frame corresponding to the position of the playhead in the Timeline.
-Current w/o Filters: Displays the same frame as the Current Frame option, without filters applied to the clip.
-Next Edit: Displays the frame of the In point one edit forward.
-2nd Edit Forward: Displays the frame of the In point two edits forward.
-In Point: Displays the frame corresponding to the currently defined In point of the sequence in the Timeline.
-Out Point: Displays the frame corresponding to the currently defined Out point of the sequence in the Timeline.
This is from pages 556 & 557 of the Final Cut Pro Users Manual.
Hope this helps.

How do I use the move tool in CS5 to put two images on to an A4 sheet?

Have recently upgraded from CS3 to CS5.
I often print out two images on A4 paper. Under CS3 I would simply adjust and crop 2 images to say 7 ins x 5 ins, after that bring up a new A4 sized sheet (file, new), then using the move tool I'd move the two separate images on to the A4 sheet and print. Fine!
Now under CS5, once I've adjusted my first image then try to bring up a second image to adjust that one I seem to lose the first one from the screen. But on going back via Bridge and clicking on the image it re-appears - problem is, I lose the second image.
When I bring up a new A4 sheet neither of the images stay on the screen and there is nothing to move.
Have been into Preferences to see if there is anything there to help but can't see anything.
Does anyone know what is happening here and what I'm doing wrong i.e. how do I get 2 separate images on to an A4 sheet?
Thanks,
Bob Eveleigh.

There have been changes since cs3, mainly that cs5 uses tabs.
Tabs can be confusing if your coming from cs3.
If your in the tabbed mode, try going to Window>Arrange>Tile.
All your open documents should be visible on the screen.
If this is the cause of your frustrations, you can read more here:
http://help.adobe.com/en_US/photoshop/cs/using/WS8599BC5C-3E44-406c-9288-C3B3BBEB5E88.html #WS6389D09B-91D5-4474-9AED-C52AE33356EB
MTSTUNER

Help please, I can only see outlines when I use the shape tool in CS5 ?

When I open action script 2 or 3 in CS5, and draw a rectangle or any shape, I can only see outlines? The problem IS NOT the outlines button that is in the layers palet as I have changed this many times and it has mad no difference and the problem IS NOT because I have selected no fill or colour for the shape.
If you want to see a screenshot of my computer follow this link as I have exactly the same problem http://forums.adobe.com/message/2927153
BUT interestingly, when I have opened someone elses .fla work document, I can draw and fill shapes without a problem, which makes me wonder whether I am missing some basis setting when I start with my own new document ??
Any help would be much appreciated. I am fairly conversant with Photoshop but a newbie in Flash

I've learned something new since that posting you point to that might help--it has the same effect as using the outline tool on the layer, but globally. In the main menu select View -> Preview Mode -> and anything except Outlines.

Editing more than 4 clips using the multi-cam function. cs5.5

How can I edit more than 4 clips at a time using the multi-cam function in 5.5?

Ok, here's what I have so far...I managed to split up the video and edited both in the multi-camera view. Now I want to join those together so that I can use the multi-camera view to edit them together. Is there a way to do that? I tried nesting them both and laying them on the same timeline to use the multi-camera function, but now, I only get one view again. Is there something I'm doing wrong? Thanks for your help so far also. This is very interesting!

Framing an item using the Frame Chaeel - PS CS5

Similar Messages

Maybe you are looking for