Framing in PSE 4 - Process and Problem

Process: First I create some canvas space. Then I use Magic Wand to select the white canvas area. Then I select inverse. Finally, I use Edit-Stroke Outline to create the frame. Is there a better way?
Problem: After I create the stroke outline, if I go back and change the color and/or the width of the frame, the changes don't show on the screen. In other words, if I create a 20 pixel black frame, and then later change it to a 1 pixel green frame, it still looks exactly like it looked when I created it (20 and black). Am I doing something wrong?
Thanks, everyone.

Thanks Ken, but no. All I'm trying to do is draw a thin rectangular box (i.e., Frame)in the white canvas space around the pic.
To me, this should be quite simple. However, as I mentioned above, I'm getting unpredictable results from PSE. I use the Marquee Rectangle Tool to mark the frame, and then stroke outline to give it a color and width.
Stroke Outline is now drawing the frame in unpredictable ways. Sometimes it draws it for the top and right side, sometimes just for the right side, never as a complete rectangle.
I have a feeling this is user error, but I can't figure it out.

Similar Messages

Item "currently processing" and "problem decrypting book"

I handle emails from public library patrons who download books from OverDrive into Adobe Digital Editions. A patron is getting error messages which read that the ebook he's trying to access in Digital Editions is "currently processing" and there is a "problem decrypting book." At this point he sees a big down arrow and a message that says the item is still processing. If he could return the book, he would.
Any insights into how this issue could be resolved? Thanks!

So I just found a way around the problem. Turns out I was trying to 'Complete the Album' as I had already downloaded one song (with the pre-order). So, by buying the whole album - including the one song I already had - I was able to download it. It's a pain to pay for a song twice but I couldn't wait for the album.

I'm trying to buy a book. The book is made in I-Photo and when I push buy book button it starts to process and than says-- There was a problem communcating wit the apple store " help"

I'm trying to buy a book I made in I-photo. I have made a 20 page book in I-photo and when I push the "buy book" button it starts to process and then pops up a sign that say'es There was a problem commucating with the apple store. Please try again. Help

Are you buying from the correct Print Products Store? If you are using the wrong store, your AppleID may not be valid.
Is the Print Products Store set correctly in iPhoto Preferences > Advanced? It should be set to the same country as your billing address and delivery address, and match the settings of the Apple ID you are using.
And you are using iPhoto '09 or '11, right? you can no longer buy books from earlier versions.
When you reenter your settings as LarryHN described, don't forget to enable Express Checkout. It is required.

Problems signing in to PSE/PRE Forum and Customer Service

Hello-I am presently running PSE/PRE8 on a win8 computer with 12GB memory and1TB HDD. I am searching for information on PSE/PRE12. However, I am having problems with my PW/ID. I understand that Photoshop.com has been eliminated and this is the source of my sign-in problem. I change my PW and the new PW works for a while and it becomes the incorrect PW or User ID. Also,I added a new email address to support email problems. I was sent an email to click a verify link but the link was not included and the email was a noreply. I cannot contact Customer Service because it is sending noreply emails. I was able to signin to the forum during my last visit but was told that I was not eligible to post messages not answer post. I need to be able to reach Customer Service but I preently do not have a method to contact it. Thanks.

Hello Jorma- Thanks for the response however,I cannot locate your response to my "Problems signing in to pse/pre forum and customer Service". I checked the Photoshop Elements forum but I was not able to locate the subject.

Problem with leave to list-processing and return to screen

Hi all,
I am designing a screen in which I have provided a pushbutton which will allow the user to upload (via BDC) the price list to VK11 transaction. And consequently, after upload the BDC message will be captured and displayed as an ALV list. for this, I am using leave to list-processing and return to screen 100 statement.
My problem is, when I return from the alv list screen by pressing back/any button the called screen 100 is displayed as a dialog window. but actually the screen 100 is a normal screen.
How can I rectify this problem?
Thanks,
Rajan

rajan,
i think the below link will clear your problem.
[http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9d2f35c111d1829f0000e829fbfe/frameset.htm]
Regards,
Venkat

PSE 9 encountered a problem and needs to close

A few hours ago I posted the following: I have been using PSE 5 for years but all of a sudden when I try to open multiple files "could not complete the open command because of a program error" appears. I have reformatted my computer and reinstalled all programs & updates but still get the error. I am trying to access photo files in a specific, user created, directory on my computer; the funny thing is that if I access files in the My Documents\My pictures\ Sample pictures folder I am able to open all the files. Any and all help or suggestions are welcome. Thanks
Since then I downloaded & installed the trial version of PSE 9 but when I try to open multiple files I get an error message to the effect that PSE has encountered a problem and needs to close. HELP!

You might need to restart the Apple Mobile Device Service.
Read this: http://support.apple.com/kb/TS1567

My phone switches off after showing horizontal lines on the screen during the restore process and then shows the error 9 problem. please help i am so stressed.

Hello
My iphone 4S switches off after showing horizontal lines on the screen cutting through the apple logo during the restore process and then right after my iTunes shows the error 9 message, this happened 2 days ago when my phone just switched off unexpectedily and has been in this recovery mode since then. i have watched videos on Youtube and i have disabled Firewall before starting the process, i think i have done almost everything. please help anyone what do i do from here?
Just for interest sake i watched this video on youtube where this guy had the same problem but the difference is that he had it on an iPad. he opened the ipad up and did something on the ipad, it took less than a minute then his ipad worked.
I would appreciate it if someone would respond to this as fast as they can i am so stressed.
Regards
Lwando

Read here:
http://support.apple.com/kb/ts3694#9
Error 9 is usually a security software issue.

You purchase properties in Arab game (Sultan desert), while the procurement process and the discount amount lost contact wrote the running game has been cooperation from them but the problem! I can't buy any properties in the game itself and the science

You purchase properties in Arab game (Sultan desert), while the procurement process and the discount amount lost contact wrote the running game has been cooperation from them but the problem!
I can't buy any properties in the game itself and the science I don't use jailbreak and two free jailbreak is there a program hindered the procurement process so that I can buy anything from the store

Hello milkisoo,
Wow! Purchasing a new computer and monitor should be a fun and exciting experience, and instead, it sounds like it’s turned into a complete nightmare. I can only imagine your disappointment when you found two charges relating to its purchase on your debit card account, and I’m sorry for any aggravation this caused.
As I want to provide you some piece of mind, I pulled up your order number using your email address attached to the forum. After review of its payment information, I found we collected only one payment. However, when orders are first placed on BestBuy.com, a pending authorization should show up on your bank card to make sure funds are available for the order until it is fulfilled. From there, the authorization should drop off and the collection charge should appear. This is the case for your one charge of $1,051.69.
It also sounds like an error may have occurred when you initially attempted to place your order, resulting in one of your gift cards not registering properly and the order not being completed. Your card’s issuing bank doesn’t appear to have recognized this and pushed through the pending authorization. This occurred a second time when your account information didn’t quite match up with what we had on file. Please know that we haven’t ordered a collection of these funds and your issuing bank should release the two pending authorizations within 5 to 7 business days.
Thank you for posting.
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

When starting to install they stop the process and say encountered many problems try re installing

When starting to install they stop the process and say "encountered many problems try re installing" and system not modified

Try this:
1. Boot from your Panther Installer Disk. After the installer loads select Disk Utility from the Installer menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
7. Once the formatting has completed quit DU to return to the installer. Proceed with the installation of Panther.

Problem facing in ALV to List processing and back to ALV

HI all,
In ALV USER_COMMAND i have inserted statement 'LEAVE TO LIST-PROCESSING'. I want to display records on List processor (Classical report) which are selected from ALV.
Due to LEAVE TO LIST-PROCESSING i can see Classical report but from here i am not able to come back on ALV screen...even not on any screen because BACK button on GUI-Status is not working.
From List Status i can see same GUI status which i gave to ALV.
also i have tried giving LEAVE LIST PROCESSING but due to this though i get ALV back but i cant get List display.
Please direct how to move.
thanks,

hello~ try this
FORM alv_user_command USING r_ucomm LIKE sy-ucomm
                             rs_selfield TYPE slis_selfield.
CASE r_ucomm.
    WHEN 'ELOG'.
      call screen 100.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM.
screen 100 just need PBO Module
module LOG_DISPLAY output.
SET PF-STATUS space.
WRITE: / 'HELLO'.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
LEAVE SCREEN.
endmodule.

PsE 9 auto-analysis problems

PsE 9 is having problems when attempting to auto-analyze photos. The catalog I am working with is one created in PsE 8 and converted to PsE 9. No converson errors were reported. The catalog is about 91 MB is size and contains 16000 photos and a couple thousand video clips.
These are my Media-Analysis preference options...
     (enabled) Analyze Photos for People Automatically
     (enabled) Analyze Media for Smart Tags Automatically
     (enabled) All filters
     (disabled) Run Analyzer on System Startup
     (disabled) Run Analyzer only when System is Idle
Analysis will stop after it has processed what seems a random count of photos. I can monitor the progress by hovering the mouse over the purple tag on the bottom of the Organizer screen. I know there is an issue when the same photo is processed for more than the normal amount of time. Normally the photos are processed at more than one per second. I have waited for up to 10 minutes to process the same photo..
The ElementsAutoAnalyzer.exe process exists in the Windows Task Manager. However the CPU utilization is at 0% when analysis is stalled.
Attempting to manually analyze a photo will result in a progress dialog to pop up and either it will show zero progress and hang or stop at 71%. I need to exit the Organzer, kill ElementsAutoAnalyzer.exe, and then restart the Organizer to get it to work again. But then it starts analyzing from the beginning again and then stops after some time.
It looks like there is a memory leak in ElementsAutoAnalyzer.exe. The VM starts at ~54 MB and keeps on growing with every processed photo. The size increases about 1 MB per second (about 15 photos).   The organizer stops showing progress after the ElementsAutoAnalyzer.exe VM size reaches around 1.7 GB.

I'm trying to use the advertised feature to help me narrow down issues with photos. I've already got too many of them. I will take any help from an automatic tool by showing potential issues with photos. I can be the final judge if a photo is out of focus or is too dark. My plan is to filter by Blur for example. Then I can quickly assess all photos for this and remove photos that are clearly not desirable.
Many of the issues pointed out by John Rellis can be resolved by making your media read-only.
The large amount of CPU times issue point out by John looks like was resolved in PsE/PrE 9 by the new 'Run Analyzer only when System is idle".
I also use this for videos. The scene detect is great and helps me pick out clips as I am assembling my videos.
I had the impression that Adobe cleaned up some of the auto-analysis features with PrE 9 so that more people could take advantage of it, like I would like to.

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Image Processing and machine vision don't appear in Function Palette

Hi,
I have problem and I can't solve it
Image Processing and machine vision don't appear in Function Palette, Although I set up NI imaq and NI Vision Acquisition Why??
Anyone can help me?
Solved!
Go to Solution.

If the image is already a Grayscale U8 image you would just have to save it to a bitmap file using the IMAQ WriteFile VI. If not, use the IMAQ Cast Image VI to convert it to a Grayscale U8 and then save it.
Also, it would probably be better to create a new thread for questions like these.
Cameron T
Applications Engineer
National Instruments

I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted!

I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!

I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps.

Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
Thanks

You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
Are you with me so far? - Yes.
And @ Varjak is right that after the 3rd restore I get the replacement error.
Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Message was edited by: jabgars

Framing in PSE 4 - Process and Problem

Similar Messages

Maybe you are looking for