Free addition to an already existing print subscription package?

Can one provide work created with iBooks Author as a FREE ADDITION to an already existing subscription package? No rise in the subscription cost would occur if this were added. This would be a free addition for subscribers to download for free. This would act as a free digital option/addition to the print subscription. Possible? I know you can distribute the iBook Author work for free, but wanted to ask if it could be free inside of an existing subscription pacakge that is not conneted to iTunes or the iBooks store.

Does this apply?
http://support.apple.com/kb/HT5071#3
Can I distribute works created with iBooks Author as part of a product or service that charges a subscription-based fee?
Books created with iBooks Author may not be sold as part of a subscription-based product or service. iBooks Author books must be distributed free of charge or made available for sale via the iBookstore.

Similar Messages

OS is asking to install already existing printer driver over and over again

OS is asking to install already existing printer driver of a printer that already exists and works. If I say yes, he searches and finds nothing. What can I do to end this?

What kind of printer is it? Try deleting that folder from /Library/Printers/ and reinstalling the update.

Additional information: The sorting already exists

I am using VB .NET 2003 and Crystal Report XI.
The report has two sorting fields and I want to change the sorting order through programming. It has been working well until my computer died. After I got a new computer and set up everything, restored the source code from Source Safe, now everytime I try to change the sorting I get this error
An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in crystaldecisions.crystalreports.engine.dll
Additional information: The sorting already exists
Here is the code causing this error:
obj1.DataDefinition.SortFields.Item(0).Field = FieldDef
Where obj1 is a ReportDocument.
Does anyone know what is going on?
Thanks,
Alex

Hi, Alex;
I am not sure what the cause could be.
If you try a different report do you get the same results?
Have you installed the latest Service Pack for CR XI?
Regards,
Jonathan

Having trouble downloading a free trial of adobe acrobat xi pro - error keeps saying that an adobe file already exists

Hio,
I'm trying to download the application Adobe Acrobat XI pro - but every time I go through the download process, it comes up with an error that says it can not download because an adobe file already exists in the folder. I don't have XI Pro downloaded. Any thoughts?

Update... Derp... Had it already loaded and didn't even know it..

Getting "object already exists" message when trying to install new software.

Quite coincidentally, I came across a solution for the "object already exists" message that had recently been interferring with the downloading of new software. This solution was offered by another on a different website, but it has solved my problem.
My operating system is Windows 7 Ultimate.
The Windows Security Update KB2918614 seems to be wreaking havoc with some systems. It did so with mine.
After removing this particular update, I am now able to install software (was actually just trying to reinstall my HP printer software as I am having another issue with it).
Don't know if this will help anyone else, but it worked for me.

To rid myself of the "object already exists" issues due to the Windows Security Update KB2918614 . . . I have learned that an additional step must be taken to keep Windows Updates from automatically reinstalling this update . . . once again, preventing installation of software.
One needs to hide the update to prevent Window Updater from reinstalling.
Taken from the Windows community:
Marilyn - Support Engineer replied on December 9, 2008
The update in question can be hidden, which will prevent this update from downloading and installing.
To hide this update:
       Open Control Panel
       Open Security
       Select ‘Windows Update
       Select the option View Available Updates in the upper left hand corner
       Locate the update in question, right click and select ‘Hide Update’
Thanks
Once again, my operating system is Windows 7 Ultimate and this particular update was causing difficulty for my specific operating system.
JB1956

Newly added printer affects existing printer drivers on the server

I did not find anything related to this topic so I thought I post on the forums:
we are running a W2K03 x32 merely as a printer server. On the server are various queues for HP Printers e.g. modell 4050tn, 4100tn, 5100tn, 4014N,4015PX.
Now everytime we are going to add a new modell, e.g. a 3005DN recently, after driver installation (of course downloaded the most recent ones from the HP website) all existing printer queues show "Driver upgrade needed" on the client PCs.
Can this be avoided somehow?
Thank you and kind regards,
Peter

Hi,
We can add drivers for client computers running 32-bit or 64-bit versions of Windows.
To add client printer drivers to the print server
==================================
1. Open Print Management.
2. In the left pane, click Print Servers, click the applicable print server, and then click Printers.
3. In the center pane, right-click the printer to which you want to add additional printer drivers, and then click Manage Sharing.
4. Click Additional Drivers. The Additional Drivers dialog box appears.
5. Select the check box of the processor architecture for which you want to add drivers.
For example, if the print server is running an x64-based edition of Windows, select the x86 check box to install 32-bit version printer drivers for client computers running 32-bit versions of Windows.
6. If the print server does not already have the appropriate printer drivers in its driver store, Windows prompts you for the location of the driver files. Download and extract the appropriate driver files, and then in the dialog box that appears, specify
the path to the .inf file of the driver.
Note: You might not be able to extract some printer drivers without installing them. If this is the case, log on to a client computer that uses the same processor architecture as the printer drivers that you want to add to the print server, and install those
printer drivers. Then use Print Management from the client computer to connect to the print server, and add the additional drivers from the Additional Drivers dialog box. Windows automatically uploads the drivers from the client computer to the print server.
For details:
Print driver installation on 32-bit versus 64-bit servers
http://blogs.technet.com/b/askperf/archive/2010/01/19/print-driver-installation-on-32-bit-versus-64-bit-servers.aspx
Hope this helps!
Best Regards
Elytis Cheng
Elytis Cheng
TechNet Community Support

How can i access appstore on new ipad air without putting credit card details on my already existed apple id.

Hi
I made my apple id for my new 1st apple ipad air from my hp laptop. when i want to access appstore to download some free apps it is asking to review my details for credit card and i dont have that.
I know that we can make new account from ipad/appstore without putting down payment details but how can i access appstore without putting credit card details on my already existed apple id.?

You can create an iTune and App Store account without credit card
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

I'M TRYING TO DOWNLOAD MY MUSIC BACK FROM THE ICLOUD BUT ITS TELLING ME THAT THERE'S A BILLING ISSUE. I PURCHASE A FEW SONGS AND THEY ALREADY EXIST IN MY LIBRARY.

I PURCHASE A FEW SONGS ON MY NEW IPHONE 4S 3G HOWEVER THE SONGS ALREADY EXISTED ON MY OLD IPHONE AND BY SOME STRANGE REASON THEY MANAGE TO SQUEEZE BACK INTO MY LIBRARY, I DON'T WANNA KEEP THEN AN I DON'T KNOW HOW TO RETURNS THEM BACK FOR CREDIT OR REFOUNDS AND I REFUSE TO PAY FOR REPEATED SONGS OR MUSIC SO I RESET MY PHONE THINKING I WOULD STOP GETTING THE BILLING ANNOUNCEMENT OVER AND OVER AND NOW I CAN'T EVEN DOWNLOAD MY MUSIC BACK AGAIN. CAN SOMEONE PLEASE HELP ME WITH THIS ISSUE AND HOW TO AVOID PAYING FOR SUCH REPETED MUSIC ETC... AND HOW DO I GET TO BY
PASS THE PAYMENT INFORMATION SO I CAN USE MY ACCOUNT WITHOUT THE ANNOYING PAYMENT INFORMATION ETC. I CAN'T EVEN GET ANY FREE APPLICATIONS AND ONLY CAUSE ITUNES ITS CHARGING ME FOR STUFF THAT I DON'T EVEN WANT OR NEED. WHY DO THEY DO THAT? AND IF YOU ALREADY PAY AND OWN YOUR MUSIC WHY CAN THEY GIVE YOU WHAT YOU ALREADY OWN... THEY ARE A BUNCH OF SON OF A *******... SOMEONE. PLEASE REPLY SOON. THANK YOU!

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

Weird CS4 error when saving eps files on a Mac: "...specified files already exist in the target location"

Hi There,
All 3 workstations in our studio are experiencing weird file behavior when re-saving eps files from Illustrator.
Basically Illustrator creates a new file in addition to the original and adds a "-01.eps" onto the file name. If you re-save your original, Illustrator brings up a dialogue box that states:
Some of the specified files already exist in the target location. The files marked below will be replaced:
filename.eps
filename-01.eps
We've been deleting the "-01.eps" files each time but it's becoming tedious. The behaviour occurs when re-saving an eps file to a server or the desktop.
All machines are new Quad-core MacPros running:
- Leopard 10.5.8
- Illustrator CS4 14.0.0
We've checked for Illustrator updates from within Illustrator but we seem to be running the latest version.
Is anyone else experiencing this behavior?
Any help or pointers in the right direction would be much appreciated.
Cheers
Ben

Thanks for the reply.
The error occurs when we save the document but if we choose save as, "Use Artboards" seems to be unchecked so not sure if this issue is related or not. Will re-save the document using save as then see if the issue persists.
Why do we still use eps?
Basically because we've found it to be much more compatible. Our entire logo library is in eps format (18 years worth) partly because it was previously the only format to use and partly because it allows account managers to send logos to clients, printers, TV stations etc and not involve the studio (saving out an eps version).
Although "Create PDF compatible file" is a good idea, we've encountered costly issues with colours and images - especially if the recipient is using old CS software, non-Adobe software or is using some kind of hardware RIP. We now just go with what we know works.
But I do find saving eps versions of everything to be a bit painful. In fact, I've always found Illustrator in general to be a bit painful when compared with Photoshop or AfterEffects. Illustrator seems like it's been developed by a different company some times!
Cheers, and thanks for the help.

Printing to Adobe PDF - non-existant print queue or hanging up error

When printing to a pdf, the process is getting stuck in the printing/saving part of the process. As the attached image will show, the pop-up window shows the file name in the Document Name list, but it defaults to the file entitled "06-2013 Newsletter" (my apologies for all the black scribbles; they're there for privacy's sake). I am unable to select the name of the file I'm printing (in this case, "Combined"); it would appear that the pdf is trying to save into a file that already exists. I thought that perhaps the print queue needed to be cleared, but under Devices and Printers, "See what's printing" for the Adobe PDF printer shows nothing in the queue. The task then comes to a standstill and I am unable to continue.
After researching the issue, the only advice I can find is to do a "hard delete" of everything printing or spooling on my server to hopefully "force out" the stuck jobs, but this is not really an option during a busy workday when multiple jobs are printing at any given time. Is there a more simple solution that I am missing?

Well, after restarting my machine the print queue was cleared of all the dead jobs, but when attempting to print to PDF it hung up again, and then did the same as before - all subsequent jobs tried to save as the filename of the first job in the queue. Very annoying!

Errror message: file already exists - overwrite or save as?

When I attempt to open the .cp file that I had previously
worked on today I now get the following series of messages:
1. C:\Documents and Settings/vsutherl/My Documents\My
Captivate Projects\game\game2.cp already exists.
Do you want to overwrite the file or save as a new file?
When I select "Overwrite" or a File Save As, I get the
following message in response:
Adobe Captivate could not open "game2.cp" because it is
either not a supported file type or because the file has been
damaged (for example, it was sent as an email attachment and wasn't
correctly decoded).
This began happening after I attempted to click the game2.exe
file to review the project in its final (stand alone) form but
clicked the .cp file in error, which was already open.
Now all four of the projects (which were clones of each other
with simple text changes for each project) receive the same error
message. I can no longer open any of the source (.cp) files to make
additional changes. This represents *weeks* of work and I cannot
start from scratch to rebuild all four projects - again. I've
already had numerous problems with these projects (per prior posts
here).
Other projects (totally separate and apart from these 4) open
properly. However when game2.cpgot corrupted it caused all of the
other gameX.cp files to also receive the same error message;
resulting in not just one file being corrupted but all 4 even
though the problem that was originally encountered was when
attempting to (re-)open game3.cp (while already open).
How can this file corruption be overcome? I am using Windows
2000 and Captivate 3.
Help and thanks!
Vince

Another possibility, I think, is using the wrong version of
Captivate to
open the course. I see this error, or something similar, if I
attempt to
open a CP2 file in CP1. Do you have various versions of CP on
your
computer? Are you sure you're using the proper version to
open a given file?
Erik
awelendam2 wrote:
> Adobe Captivate could not open "game2.cp" because it is
either not a supported
> file type or because the file has been damaged (for
example, it was sent as an
> email attachment and wasn't correctly decoded).
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware
*The Blankenship Caveat: Note that direct linking to http
content
through any Authorware icon will likely fail if a proxy
server is present!*

Cannot rename DC, "Cannot create a file when that file already exists."

Hi,
A long time ago we used a domain controller named jacob.mydomain.lan. It was removed, possibly in a 'dirty' way, and now we cannot re-use that name for another domain controller. In the meantime we have upgraded to Win 2012 domain controllers
now, and when I enter this to rename:
netdom computername ourdc.mydomain.lan /add:jacob.mydomain.lan
I get the error: "Unable to add jacob.mydomain.lan as an alternate name for the computer. The error is: Cannot create a file when that file already exists."
If I enter:
netdom computername ourdc.mydomain.lan /remove:jacob.mydomain.lan
I get: "The command completed successfully", but it still refuses to add jacob.mydomain.lan
After each attempt to add a forward zone dns record 'jacob.ourdomain.lan' has been created. I always erase this manually afterwards.
What is the problem? How can I search to find the offending 'file' named 'jacob'?
Thanks a lot for help on this.
regards Tor

Kevin,
I suggest you wait 30 days instead of 3 days before you enthusiastically close threads. Some people might think you are being a jerk if you don't.
"K_evin Zhu" wrote in message
news:[email protected]...
Hi,
As this thread has been quiet for a while, we will mark it as �??Answered�?? as the information provided should be helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to
unmark the answer as you wish.
BTW, we�??d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
Best Regards
Kevin
Tomás Mason

Installing Bootcamp onto already existing drive

Looking to install Bootcamp then WinXP onto an already existing MacBookPro that is in daily use. Can this be done w/o having to backup, wipe clean and restore my Mac side?
I will of course backup my Mac data just to be safe, just wondering if I have to reformat my entire internal drive just to set up a Windows partition?
TIA

That is exactly how it is done and that is WITHOUT having to wipe out your Leopard installation. You would run Boot Camp while in Leopard and create a Windows partition on your current HD. Ensure that you have enough space to do so.
The installation guide (which you should print out and read) is available [HERE_|http://manuals.info.apple.com/en/Boot_CampInstall-Setup.pdf].
Axel F.

Recruitment-Applicant Actions- Applicant 00000001 already exists

Dear Gurus
hope u'll b doin well.
I am facing a problem while processing applicant data. My Hiring action from PB40 --> Initial data entry is working well.
Now I want to insert additional data for applicant. I have configured "additional data entry actions as follow
Recruitment>app selection>applicant actions
Info group
97                 01     MOD     4001            Applications
97                 02     INS     0022            Education
97                 03     INS     0023            Other/Previous Employers
97                 04     INS     0024            Qualifications
97                 05     INS     4002            Vacancy Assignment
97                 06     INS     4005            Applicant's Personnel Number
I also tried first line on above infogroup in following ways aswell
97 01 COP 4001 Applications
97 01 COP 4000 Applications
I opened transaction PB40.
Insert applicant number. enter date. select this action from list. and execute.
System is giving me following msg.
Applicant 00000001 already exists (initial entry action not allowed)
Message no. PA128
================
Kindly guide me how to resolve this issue.
regards,
Edited by: Ragunath on May 27, 2011 3:25 PM

Hi
For additional data action also you have configured it as initial hiring ... so it is throwing the error
R K

SQL Server 2008 R2 Management Studio (express) install fails (Management Tools Basic Failed) - Error 1316. The Specific account already exists.

Hi,
I try to install, the SQL Express 2008 R2 with Advanced
The installation has only one error (Error 1316. The Specific account already exists.) and the Management Tools Basic setup is failed.
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Start time: 2015-01-02 16:17:17
End time: 2015-01-02 16:24:01
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SSCRuntime_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?
LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4000.0
Machine Properties:
Machine name: KHPNHSI_BNANG
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: g:\41bee43707e62fab54ec\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 2
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,SSMS,SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLExpress
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: g:\41bee43707e62fab54ec\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: PSI\ssamnang
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SystemConfigurationCheck_Report.htm
Please help!
Samnang.

Hi SSamnang,
According to your description, you come across the error that the specific account already exists. Please help to share the complete error log in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150102_161500\SSCRuntime_Cpu32_1.log. You could
use google drive to upload the error log following the steps in the article:
https://support.google.com/drive/answer/2424368?hl=en
From the exception help link, we notice that, the issue could be due to that an attempt fails to install SQL Server Native Client on a computer where SQL Server Native Client is already installed.
I recommend you to check if there is already an existing SQL Server Native Client on your computer. If there is an existing one, you could uninstall it and install SQL Server again.
In addition, there is a similar thread for reference:
https://social.technet.microsoft.com/Forums/en-US/dc31bffd-c9e2-4630-b5d7-9252b03c24fe/sql-2008-r2-management-tools-install-fails-the-specified-account-already-exists?forum=sqltools.
Regards,
Michelle Li

Free addition to an already existing print subscription package?

Similar Messages

Maybe you are looking for