Free app not working after update. Please help

Yesterday, my daughter downloaded an update to a free app that she has on a first generation iPod Touch. The update was successful, but now it won't load up at all. We tried restoring the system from a previous backup and reinstalling the app, but alas, no joy. Does anyone know if previous versions of a free app can be found anywhere. Her iOS is 3.1.3 so pretty antiquated I know. Many thanks.

-Try here:
iOS: Troubleshooting applications purchased from the App Store
- You can only purchases the current version of apps that are in the App store. Pevious versions are not availalbe.
- The ony way to get a previous version is if you happen to have one in a coupter file backup.

Similar Messages

5g 30gig iPod not working after update, Please Help!

I have a 5th gen 30gig iPod and a yesterday I tried to update it. During the update after it shut itself off and started back up the updater froze around 20%. After about two hours of waiting I forced the updater to quit (restarted it with menu/select) and then tried to turn it back on to no avail. So right now the iPod is dead.
I've tried the whole hold menu/select to reset (even for up to a min) then I did the flip hold on and off and try again method. I also tried with the iPod plugged into my PC and my Mac. I also tried using the AC adapter. All attempts resulted in failure. Because it stopped working after the update I'm confident that it isn't the battery or that the iPod is physically damaged and that this is just a software issue.
Any help would be greatly appreciated. I've had the iPod for a little over a year and therefore have no warranty for it.

I am having the same exact problem as you, it just won't boot up. The apple logo lights up on the screen for a little while and tried to boot up, then the screen goes black, and it starts over, the ipod trying,(and failing)to boot up. This goes on like this until the battery is dead. I'll repost if I figure out how to fix this.

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please help

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Camera App not working after update to iOS 7.1.1 on iPhone4

Hi Guys,
I have recently downloaded iOS7.1.1 ipsw from the apple website for the correct version of my iphone4 [GSM] and updated my phone.
The camera app is now not responsing at all and i dont even see a picture in the camera app. I tried the update again and found that the problem is still evident.
Please let me know if we share the same problem and also any solution if you come across.
Regards,
Sheikh M

Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

Ipad camera app not working after update 7.1.1 and using skype on video call

Hello,
i updated my mini ipad to ios 7.1.1
then i used skype for video call...
It worked fine for a few minutes then the front camera stopped working
Stopping skype and starting the camera app, i saw that the front camera was no more working...black screen
instead rear camera was working...
Then i tried to reset the device (pressing sleep and home button) and uninstalled skype
Now front camera works more or less, but the camera app seems always almost freezed, i cant change easily the options,
i cant record a video, only camera for snapshots is working...
any suggestion?
is it possible to uninstall the camera app and try to reinstall it?
Thanks!

Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

2ng gen ipod touch, Apps NEVER work after sync, please help a noob

2ng gen ipod touch, Apps NEVER work after sync.
am i missing something? i basically have to lose all my apps in order to add tunes.
its doing my head in, Help pweeeessee..

Hi
Try to reset your iPod and then deauthorize and reauthorize your computer, then sync the iPod again.
To reset the iPod touch just hold the Home and Sleep/Wake buttons until you see an Apple logo appear.
You can deauthorize the computer from the iTunes Store menu.
This article: http://support.apple.com/kb/TS1702 provides more general troubleshooting tips for applications purchased from the App store.
-Jason

Itunes not working after update..help please

I updated my itunes to 10.4 and since then it will not connect to the itunes store and synching is not working either. I've emailed Apple and tried their suggestions with no luck. There was a recent post on here in June with success and it was something to do with a proxy server??? Can someone help me reinstate my itunes please...i miss it!!!

Disconnect all devices from your computer. If you have not already done so after updating iTunes, repair permissions and restart your computer. If this does not work, b oot up from your install DVD and run "Repair Disk" from the Utility menu.

Sales Api Is not working After Intializing(Please help it's urgent)

Hi all,
When i am executing an sales api to create lead in sql+ it s executing fine,but when i am executing the same api after intializing in SQL+ or in concurrent request,it is troughing an error like
AS_SALES_MEMBER_PVT Using Fn....
Please help Me and also look into the code...
DECLARE
q_sales_lead_id NUMBER (8);
q_sales_lead_line_out_tb VARCHAR2 (300);
q_sales_lead_cnt_out_tbl VARCHAR2 (500);
q_return_status VARCHAR2 (10);
q_msg_count NUMBER (10);
q_msg_data VARCHAR2 (800);
a_return_status VARCHAR2 (10);
a_msg_count NUMBER (10);
a_msg_data VARCHAR2 (800);
q_noteid NUMBER (4);
x_sales_lead_line_out_tbl as_sales_leads_pub.sales_lead_line_out_tbl_type;
x_sales_lead_cnt_out_tbl as_sales_leads_pub.sales_lead_cnt_out_tbl_type;
l_sales_lead_rec as_sales_leads_pub.sales_lead_rec_type;
l_sales_lead_line_tb1 as_sales_leads_pub.sales_lead_line_tbl_type;
v_party_id NUMBER (10);
v_resource_id NUMBER (10);
v_group_id NUMBER (10);
v_person_id NUMBER (10);
v_org_id NUMBER (10);
v_customer_id NUMBER (10);
v_primary_application VARCHAR2 (150);
v_secondary_application VARCHAR2 (150);
v_lead_provider_type VARCHAR2 (150);
v_nomenclature_final VARCHAR2 (150);
v_segment VARCHAR2 (150);
v_nomenclature VARCHAR2 (150);
v_nomenclature_1 VARCHAR2 (150);
v_segment_1 VARCHAR2 (150);
v_fleet_mix VARCHAR2 (150);
v_category_set_id NUMBER (10);
v_category_id NUMBER (10);
e_msg VARCHAR2 (500);
v_party_name VARCHAR2(150);
out_param VARCHAR2(150);
CURSOR c1 IS
SELECT a.*, ROWID
FROM al_vendor_sms_crmlead_in a
WHERE a.msg_flag = 'N' AND a.customer_code IS NOT NULL
AND a.models IS NOT NULL
AND a.fleet_mix IS NOT NULL
AND a.segments IS NOT NULL
AND a.lead_provider IS NOT NULL
AND a.secondary_app IS NOT NULL
AND a.cp_mobile_no IS NOT NULL
AND a.id='L';
BEGIN
For i in c1 LOOP
BEGIN
out_param :='phone validation';
SELECT ppf.party_id
INTO v_party_id
FROM per_phones pp, per_all_people_f ppf
WHERE ppf.person_id = pp.parent_id
AND pp.phone_type = 'M'
AND pp.phone_number = i.cp_mobile_no
and rownum<=1;
out_param:='Resource_invalid';
SELECT jtf.resource_id, jtm.GROUP_ID, jtf.source_business_grp_id,
jtf.source_id
INTO v_resource_id, v_group_id, v_org_id,
v_person_id
FROM apps.jtf_rs_resource_extns jtf, apps.jtf_rs_group_members jtm
WHERE jtf.resource_id = jtm.resource_id
AND jtf.end_date_active IS NULL
AND jtm.delete_flag = 'N'
AND jtf.user_name NOT LIKE 'ALM%'
--AND jtf.attribute5='Sales'
AND jtf.person_party_id = v_party_id
AND ROWNUM <= 1;
out_param:='Party_invalid';
SELECT party_id,party_name
INTO v_customer_id,v_party_name
FROM apps.hz_parties
WHERE status = 'A' AND party_number = i.customer_code;
out_param:='Sec_prim_application_invalid';
SELECT parent_flex_value_low, flex_value
INTO v_primary_application, v_secondary_application
FROM apps.fnd_flex_values_vl
WHERE parent_flex_value_low IN (
SELECT flex_value
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009667
AND enabled_flag = 'Y')
AND enabled_flag = 'Y'
AND TO_NUMBER (TRUNC (SUBSTR (attribute1, 1, 2))) =
i.secondary_app ;
out_param:='Segment_map_invalid';
SELECT Upper(REPLACE (regexp_replace (i.models, '(\s*[[:punct:]])'), ' '))
INTO v_nomenclature
FROM DUAL;
SELECT flex_value
INTO v_nomenclature_final
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009798
AND enabled_flag = 'Y'
AND end_date_active IS NULL
AND REPLACE (regexp_replace (flex_value, '(\s*[[:punct:]])'), ' ') =
v_nomenclature
AND ROWNUM <= 1;
SELECT flex_value
INTO v_segment
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009632
AND enabled_flag = 'Y'
AND end_date_active IS NULL
AND TO_NUMBER (TRUNC (SUBSTR (flex_value, 1, 2))) = i.SEGMENTS;
SELECT ffvh.flex_value, ffv.flex_value
INTO v_nomenclature_1, v_segment_1
FROM apps.fnd_flex_values_vl ffvh, apps.fnd_flex_values_vl ffv
WHERE ffv.flex_value = ffvh.parent_flex_value_low
AND ffvh.enabled_flag = 'Y'
AND ffv.flex_value_set_id = 1009632
AND ffv.enabled_flag = 'Y'
AND ffvh.flex_value_set_id = 1009798
AND ffvh.parent_flex_value_low = v_segment
AND ffvh.flex_value = v_nomenclature_final;
out_param:='Lead_provider_invalid';
SELECT flex_value
INTO v_lead_provider_type
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009718
AND end_date_active IS NULL
AND TO_NUMBER (TRUNC (SUBSTR (flex_value, 1, 2))) =
i.lead_provider;
out_param:='vehicle_res_invalid';
SELECT lookup_code
INTO v_fleet_mix
FROM apps.fnd_lookup_values_vl
WHERE lookup_type = 'VEHICLE_RESPONSE_CODE'
AND enabled_flag = 'Y'
AND TO_NUMBER (TRUNC (SUBSTR (description, 1, 2))) = i.fleet_mix;
out_param:='Category_invalid';
SELECT mic.category_set_id, mic.category_id
INTO v_category_set_id, v_category_id
FROM apps.mtl_item_categories mic, apps.mtl_categories_tl mc
WHERE mic.category_id = mc.category_id
AND organization_id = 106
AND description = v_nomenclature_final
AND ROWNUM <= 1;
out_param:='api-Error';
l_sales_lead_rec.customer_id := v_customer_id;
l_sales_lead_rec.status_code := 'NEW';
l_sales_lead_rec.attribute15 := v_segment_1;
l_sales_lead_rec.attribute12:=To_Char( i.expected_closedate,'YYYY/MM/DD HH24:MI:SS');
l_sales_lead_rec.attribute10 := v_lead_provider_type;
l_sales_lead_rec.attribute9 := v_secondary_application;
l_sales_lead_rec.attribute8 := v_primary_application;
l_sales_lead_rec.assign_to_salesforce_id := v_resource_id;
l_sales_lead_rec.assign_sales_group_id := v_group_id;
l_sales_lead_rec.assign_to_person_id := v_person_id;
l_sales_lead_rec.vehicle_response_code := v_fleet_mix;
l_sales_lead_rec.description:=v_party_name||' '||v_nomenclature;
l_sales_lead_line_tb1 (1).category_id := v_category_id;
l_sales_lead_line_tb1 (1).category_set_id := v_category_set_id;
l_sales_lead_line_tb1 (1).organization_id := v_org_id;
l_sales_lead_line_tb1 (1).quantity:=1;
as_sales_leads_pub.create_sales_lead
(p_api_version_number => 2.0,
p_init_msg_list => fnd_api.g_false,
p_commit => fnd_api.g_true,
p_validation_level => fnd_api.g_valid_level_full,
p_check_access_flag => 'Y',
p_admin_flag => 'Y',
p_admin_group_id => v_group_id,
p_identity_salesforce_id => v_resource_id,
p_sales_lead_profile_tbl => as_utility_pub.g_miss_profile_tbl,
p_sales_lead_rec => l_sales_lead_rec,
p_sales_lead_line_tbl => l_sales_lead_line_tb1,
p_sales_lead_contact_tbl => as_sales_leads_pub.g_miss_sales_lead_contact_tbl,
x_sales_lead_id => q_sales_lead_id,
x_sales_lead_line_out_tbl => x_sales_lead_line_out_tbl,
x_sales_lead_cnt_out_tbl => x_sales_lead_cnt_out_tbl,
x_return_status => q_return_status,
x_msg_count => q_msg_count,
x_msg_data => q_msg_data);
as_sales_leads_pub.Build_Lead_Sales_Team (
P_Api_Version_Number =>2.0,
P_Init_Msg_List=>FND_API.G_TRUE,
p_Commit=>FND_API.G_TRUE,
p_Validation_Level=> FND_API.G_VALID_LEVEL_FULL,
P_Admin_Group_Id =>v_group_id,
P_identity_salesforce_id=>v_resource_id,
P_salesgroup_id=> v_group_id,
P_Sales_Lead_Id=>q_sales_lead_id,
X_Return_Status=>q_return_status,
X_Msg_Count=>a_msg_count,
X_Msg_Data =>a_msg_data);
IF q_return_status = 'S'
THEN
UPDATE al_vendor_sms_crmlead_in
SET conv_status = 'S'
WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
ELSE
UPDATE al_vendor_sms_crmlead_in
SET conv_status = 'E' WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
END IF;
EXCEPTION
WHEN No_Data_Found THEN
UPDATE al_vendor_sms_crmlead_in a
SET a.conv_status = 'ERROR',error_description=out_param
WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
COMMIT;
END;
UPDATE al_vendor_sms_crmlead_in SET msg_flag='Y' WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
END LOOP;
END;

Please post this question in the CRM On Demand Integration Development forum.

SA30 USB do not work after reinstall, please help!!

Hi, my SA30's USB do not work at all after reintalling, I do not have the original CD with the laptop as it is a gift from my mate.... I couldnt find the driver from the website, please could anyone help me???
I could use the USB mouse but when I plug the external hard disk in, it has no responses, I tried to search for new hardware, it couldnt detect it. Any information would be appreciate, cheers.

When you instll another OS than the recovery OEM OS you have to install the drivers and tools in a right order!
This order is on the Tools & Utilities CD in a html file! When you follow these order all hardware should be detect!
Also you can go to http://eu.computers.toshiba-europe.com and download the drivers
Bye Hans

Peep App-Not working after update

I just installed the most recent update to the droid incredible. After the download, the peep app is not working. After entering my user name and password, it says invalid. I have seen on other messages boards this is a common problem with the peep app after installing this update.
I was wondering if anyone else has experienced this problem and found away to get peep to work.
Thanks!

Problems with Twitter working with peep. Use an app from the market instead.

Default Email app not working after update on 5/3 on S4. It checks mail but never downloads anything. Last updated screen stuck on date and time just before update

After the last update, the default email app is not working as expected. It can send email but when it checks email, it never downloads any new messages. The last updated display at the top of the screen shows that the last successful update was on 5/3 just before the update took place. I will probably just download an email app and can this one but thought I would ask in case there is an easy fix.

On my S4, a little message "Master sync turned off" blinks at the bottom of the email app when I tried to manually sync.
On another thread, I discovered that you have to go into the settings toggle screen (swipe down from the top, hit the little four-square icon in the upper-right) and find "Sync". That has to be turned back on. For whatever reason, it was off on my phone after NC5 installed, and the email program needs it to be on. Was it always there? I don't know.
There is a separate sync setting that you can change inside the email app for each account... but they all cease functioning if the "Sync" is off. So make sure the main "Sync" is on, and maybe that will restore your email function. Good luck!

Apps not working after update

anyone know how to reactivate my apps on my ipad

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Viber app not working after updating software

Viber app is not working on my iPhone 4 after I updated the software on my phone. I deleted the app and reinstall the same app and the problem was there as before. Viber is not recognizing my phone number. When I enter my phone number, a message pops up saying invalid number. Can I get some assistance to rectify this problem ASAP.

Could be a problem with the App and that it may not support IOS 7.1.1 yet and need updating.

Apps not working after updating to iOS 5.1.1

I just updated the iOS 5.1.1 on my 4s last night and all my downloaded apps couldn't be opened (the original apps working porperly). They seem to be running because they are on the running apps bar when I double click the menu botton. Does anyone have the same problem and what should I do?
Thanks

I have a Ipad II
I have tried all these fixes and nothing seams to work. My app's have been on hold for week to get updated. I assumed I did not have a good enough connection, but Im in starbucks with a good connection and still no luck. I upadted today to 5.1.1 .. I have tried tup downloand a new app, just in a holding pattern. When I pause it and ask it to reload, it says
"unable to download application" done or retry are my options. Tried retry many times, with no success.
I have tried to shut it off holding the side button but the red bar does not disapear. It stays there until I give up.
I have logged out, shut down, logged back in..
Any suggetions????
I saw something about the DNS?? Is that for the Ipad or a computer?
Thank you

Free app not working after update. Please help

Similar Messages

Maybe you are looking for