Free bumper case when and how?
Steve indicated that every iPhone 4 owner would receive a free bumper case to hopefully correct the antenna issue. When and how does one receive the case? I must admit that I have only had a few dropped calls. I live in an area that has a weak signal and my 3G had not one dropped call in 2 years!!!
Apple will offer a free iPhone 4 Bumper or other select cases to iPhone 4 customers. Details on how to order a free Bumper or case will be available soon on apple.com, details most likely this week.
Similar Messages
-
How do i get my free bumper case?
i have just bought an iphone 4 and was wondering how i get a free bumper case??
Check this article about Antenna or reception problems: http://support.apple.com/kb/HT4389
-
I have read that new purchases of macbook pro will get free upgrade to LION OS. When and how do I go about this?
http://www.apple.com/pr/library/2011/06/06lion.html
The Mac OS X Lion Up-To-Date upgrade is available at no additional charge via the Mac App Store to all customers who purchased a qualifying new Mac system from Apple or an Apple Authorized Reseller on or after June 6, 2011. Users must request their Up-To-Date upgrade within 30 days of purchase of their Mac computer. Customers who purchase a qualifying Mac between June 6, 2011 and the date when Lion is available in the Mac App Store will have 30 days from Lion’s official release date to make a request.
Currently that's the only information available. I suspect more will be posted as we get closer to launch. -
Revision: 10545
Author: [email protected]
Date: 2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
Log Message:
Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
QE Notes: 2 Mustella tests fail:
components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
Doc Notes: None
Bugs: SDK-15241
Reviewer: Darrell
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/browser/DataGrid
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15241
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.asHi Matthias,
Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional). We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files). We also use VIPM Enterprise to distribute new VI Packages over the network.
Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
Please feel free to contact JKI if you have any specific questions about these products.
Thanks,
-Jim -
Possible to exchange the free bumper/case?
I'm receiving a Griffin Etch ($30 value) from the free bumper/case program. My question is if it is possible to take this, along with the receipt, into an Apple store and exchange it for a case of the same or lower value? I'm looking for a slider sleeve, but the Etch was the best that was offered to me via the free case program.
I was wondering the same thing. My wife and I bought new iPhones together. I got the Bumper and she got the clear case. Now she wants the bumper instead. I doubt we will be able to exchange them, but I am interested.
-
i have purchased my new mac book pro retina display 2 weeks , should i get mountain lion upgrade for free !!! and how to download my free copy..?
i'm from Australia, i have used your link to register , when i have given my details, its showing my country is United states.. is there any separete link form AUS?
cheers.
john -
What is correlation ? when and how to use it in BPEL process?
Hi,
What is correlation ? when and how to use it in BPEL process?
ThanksHi:
Take a look at this entry http://blog.andrade.inf.br/2010/03/oracle-bpel-11g-correlation-sets.html
thx
best -
When and How to close database connection in JSP?
Hi there,
I am using MySQL and JDBC 3.0, in my system, When and How to close database connection in JSP?
Thanks in advance.
Lonely Wolf
<%@ page session="true" language="java" %>
<jsp:include page="checkauthorization.jsp" />
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jstl/sql" %>
<%--
Execute query, with wildcard characters added to the
parameter values used in the search criteria
--%>
<sql:query var="availablecomputerList" dataSource="jdbc/Bookingcomputer" scope="request">
SELECT * FROM computer where status=0
order by s_code
</sql:query>
<html>
<head>
<title>Search Result</title>
</head>
<body bgcolor="white">
<center>
<form action="checkin.jsp" method="post">
<input type="submit" value="Back to Check-in Page">
</form>
<c:choose>
<c:when test="${availablecomputerList.rowCount == 0}">
Sorry, no available computer found.
</c:when>
<c:otherwise>
The following available computers were found:
<table border="1">
<th>Computer</th>
<th>Description</th>
<th>Status</th>
<c:forEach items="${availablecomputerList.rows}" var="row">
<tr>
<td><c:out value="${row.s_code}" /></td>
<td><c:out value="${row.description}" /></td>
<td><c:out value="${row.status}" /></td>
</tr>
</c:forEach>
</table>
</c:otherwise>
</c:choose>
</center>
</body>
</html>when should you close the connection? when you're done with it.
how should you close the connection? like this: conn.close();
that said, doing this in a JSP page is bad form and not recommended
JSP's typically don't contain ANY business or data logic -
How can I see what, when and how much has been downloaded from the net?
I use a satellite internet service which limits me to only 200Mb of downloads in a 24 hr period. Should I go over, I am "locked out" of my internet service for the next 24 hr period. Lately I have been locked out without thinking I have downloaded anything. I am wondering if there is a place on the computer I can look to give me an idea what has been downloaded and when? I did change the Apple software update to not "automatically update important files" but I am wondering are there any other programs or anything the system may be downloading automatically without me knowing and what can be done to rectify it?
ThanksThanks for the thoughts. Here is some more for consideration. I was locked out yesterday and when I finally got out of "lock up" today, I went to my satellite internet provider's site to see how much and when it was downloaded. I booted my machine at about 10 AM yesterday and according to their site between 10 and 11 AM I downloaded 188MB of data. Then from 11 AM to Noon they said I downloaded another 28MB which then resulted in my being locked out of the internet until noon today. During that time I was on the net, I initiated no downloading from any site nor did I have any video streaming. What is frustrating is I have no idea what is being downloaded or how much. Most other days of the week it appears that downloaded material is 75Mb or less and I can remember generating the downloads.Looking at their site, the "downloading" of mystery material begins quickly after booting the computer which leads me to believe, as Kappy was saying, this is likely something like Apple Software updater or such set to "Download on Startup". I guess I'm not quite sure how to check to see what is set to "Download on Startup" and how to make sure nothing downloads at startup unless approved by me. Any thoughts?
-
How can i have the detail of the things i bought ,what ,when,and how much?
I have recurent payment of which i,m ot aware or reonsible for and i need to check what is this about . What was bough, when it was bought and how much it costed.
Really urgentThere are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
To view the purchase history on your account, log into your account on your computer's iTunes via the Store > View Account menu option, and you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases -
About case when and the sql clause
Hi:
The following is my sql clause:
SELECT t.*,b.name
FROM dbtest1 t
LEFT OUTER JOIN dbtest b ON t.NO = b.empno
WHERE t.ChineseName like '%'||:ChineseName||'%' AND b.name like '%'||:name||'%'
ORDER BY t.ChineseName
The main problem is I hope to check the b.name if it is null it can be passed as NVL function, so I try using case when, but it not working.
When b.name exist in where clause, the result columns will not include the data without b.name(or implies the b.name is NULL); And that
make the result data not exactly right.
is it possible to use case when to make the following snippet implemented:
case when b.name is not NULL then b.name like '%'||:name||'%'
else b.name = NULL(b.name=b.name seems not work to parsing null data)
end
Thanks a lot.962769 wrote:
Hi:
The following is my sql clause:
SELECT t.*,b.name
FROM dbtest1 t
LEFT OUTER JOIN dbtest b ON t.NO = b.empno
WHERE t.ChineseName like '%'||:ChineseName||'%' AND b.name like '%'||:name||'%'
ORDER BY t.ChineseName
The main problem is I hope to check the b.name if it is null it can be passed as NVL function, so I try using case when, but it not working.
When b.name exist in where clause, the result columns will not include the data without b.name(or implies the b.name is NULL); And that
make the result data not exactly right.
is it possible to use case when to make the following snippet implemented:
case when b.name is not NULL then b.name like '%'||:name||'%'
else b.name = NULL(b.name=b.name seems not work to parsing null data)
end
Thanks a lot.Your question isn't very clear. But below is the statement as I make a meaning out of it.
SELECT t.*,b.name
FROM dbtest1 t
LEFT OUTER JOIN dbtest b ON t.NO = b.empno
WHERE t.ChineseName like '%'||:ChineseName||'%'
AND b.name like '%'||NVL(:name, b.name)||'%'
ORDER BY t.ChineseNameIf you want to use case, then:
SELECT t.*,b.name
FROM dbtest1 t
LEFT OUTER JOIN dbtest b ON t.NO = b.empno
WHERE t.ChineseName like '%'||:ChineseName||'%'
AND b.name like '%'|| case when b.name is not null then :name else b.name end ||'%'
ORDER BY t.ChineseNameIf this is not what you are looking for then, read {message:id=9360002} and post the relevant details with an example (Create Table script, Sample Data creation script and the Expected output of the sample data). -
TIS IS A FREE THING FOR HOW LONG? AND WHY CANT IT BE FREE FROM NOW ON? AND TO WHAT BENFIT IS THIS TO US? AND WHAT EXCATLY DOES IT DO?
I am sorry Teresa but which Adobe software or service is your inquiry in reference too?
-
Free bumper cases wont work with car chargers
Apple sent me a bumper and I tried it with a griffin car charger and it will not plug in as the cutout in the case is not large enough to fit the end of the cord. These have been around for a while and if you want to use them do not order the bumper. I called Apple and they stonewalled and said it was a third party item and they do not guarantee to work with them even though they sell them on their web site. They will not send out a case that works either. Typical I guess as Apple never makes a mistake.
I completely agree with the topic poster.
Let's think and not just knee jerk.
First, why did Jobs introduce the bumper right at the same roll out of the iP4? I mean isn't that odd to talk about cases like some side show pitchman along side a fine, new item like the 4?
Answer- he knew at that time the external antenna was susceptible to issues if held in the lower left corner. The proof of that is his quote from the press conf. when, in addressing the issue, he said, "look we even show you where it is…x marks the spot." (as he referred to the antenna seam)
So, conclusion, issue was known and anticipated and admitted.
That brings us to the bumper. If they knew the issue and wanted to help ameliorate it, why not build a bumper that not only addresses the antenna but one that also allows maximum access to the charging opening, accommodating most chargers?
Why risk further customer issues?
Apple is a hi-tech hardware design company with few if any peers.
You're telling me they couldn't figure this out, that they couldn't build in the "Dremeled" more accessible bumper bottom?
Come on.
They blew it. That's the answer. They are human and they rushed this "patch" with the supplier and blew it.
And in the middle of a fiasco (that's what the antenna issue became) they further alienate good customers, like the person initiating this topic and countless others no doubt, by not attending to a small yet critical issue with the bumper.
So, poster of this thread, you are right.
Others, yes there are alternatives but as a business owner myself I'd advise Apple not to alienate paying customers.
All that said… the iP4 is marvelous.
Get a case that's made correctly like I did and there is no issue at all with reception. In fact it is VASTLY improved for my usage.
That may not be the same for all and that's why we listen respectfully in this forum.
So we can be helpful. Right? -
JAAS. BEA, when and how should I use it?
Hi,
I am confused and I hope someone at BEA sees this post or someone who knows the
answer steps up and clarifies this issue for me - please.
I have a basic web application, WLS 7, using Struts, Toplink, Oracle 8i. Pretty
standard. In 6.0 we used RDBMS realms to Authenticate and Authorize our users.
We used the web.xml to indicate we were using FORM based authentication and the
SECURITY CONSTRAINTS were using role names that matched what the RDBMS Realms
were pulling from Oracle.
As I read the docs and look at the examples I see all the old stuff is deprecated,
I do see I have the option of running in compatability mode - however I don't
want to do this if this is not the way things will be done in the future.
I followed the steps in the excellent post by Aaron Mulder "Weblogic 7 RDBMS Realm
Procedure" and create my own Authentication provider, deployed it and it seems
to be running. However I am now having problems getting the web.xml to "kick"
when I try and access a resticted resource I am not sent to my FORM Based authentication
login page... shouldn't I be? I would think the security constraints would be
loaded correctly and same with the LOGIN config stuff and that WLS would just
use all the providers but that it would know what to do for things like _security
check and all the contraints in the web.xml.
Am I going down the correct path? Do I just need to now write an Authorization
provider too? In my test in my Authentication provider I put everyone into the
"Administrators" group and use that in my web.xml. I would expect I would be sent
to the login page first, then WLS would upon form submittal, check the Authentication
provider, then my code would say all users are "Administrators", then it would
check that with the web.xml security constraint, then if the role matched would
send me on to the page.
Help :> I just want to get this working and make sure I am using the correct paradigm.
Thanks,
Jerry RodgersYou use JAAS when running in the app maybe, that is up to the container. It
is transparent to the developer. If your writing a J2EE app, you do not need
to write JAAS modules. Use j_security_check and the rest is handled through
the container.
You don't need that runAs() shit or LoginContxt.login() etc.
Only if you are outside the container.
Go head, reinvent the wheel. JAAS is meant for people who write containers,
not for people who use them.
Way to add confusion to an already clouded issue.
Also, let me explain J2EE authorization
You said: "As far as I know, J2EE does not specify how the authentication
is performed, so I don't know how you can say that JAAS goes
against the J2EE spec."
Dude, you define security restraints (authorization) to whatever resources
you want through a web.xml or ejb-jar.xml by asigning roles to them.
Im doing it as we speak.
Mike
"Wayne M Adams" <[email protected]> wrote in message
news:[email protected]...
>
Michael:
Please see my posts (8771 and 8772). You do use JAAS
when running an app within the WLS container. In fact,
you already are, whether you use the OOTB "new" security
SPI authentication providers or are in Compatibility
Security, in which case you're using JAAS through an adapter
to your old-style Realm.
Concerning "standard" authentication, the J2EE spec says:
"The web client forwards the authentication data to
the web server, where it is validated by the web
server... The validation mechanism may be local to
the server, or it may leverage the underlying
security services. On the basis of the validation,
the web server sets a credential for the user."
(Also, see section J2EE.3.3.2, "Non Goals").
As far as I know, J2EE does not specify how the authentication
is performed, so I don't know how you can say that JAAS goes
against the J2EE spec. WLS chose to use JAAS for authentication
because it's a Java-based implementation of a "standard" (PAM)
and Java security developers are familiar with it...
Jerry, it sounds like you're doing the right thing. You
will want to move away from the old Realm and get out of
Compatibility mode. I'm not sure what specific problem
you're having - if you're not being directed to your login
form page, my guess would be something else is wrong. That
is, I wouldn't expect to see a problem in the new ATN provider
crop up until after you had submitted your form info to
j_security_check. If you're not getting to the login page
at all, it would seem there might be a problem with a URL
mapping in a web resource collection, or something like that.
Just a guess.
Also, I don't think you need to implement your own provider
unless the one that's there doesn't meet your needs. In other
words, I can't see any reason why your authentication provider
couldn't work just fine with all the other WLS OOTB security
providers.
wayne
"Michael Lee" <[email protected]> wrote:
Dont use JAAS when running an app within your container. That goes
against
the J2EE spec.
Read my 32423432 previous posts here.
Mike
"Jerry Rodgers" <[email protected]> wrote in message
news:[email protected]...
Hi,
I am confused and I hope someone at BEA sees this post or someone whoknows the
answer steps up and clarifies this issue for me - please.
I have a basic web application, WLS 7, using Struts, Toplink, Oracle8i.
Pretty
standard. In 6.0 we used RDBMS realms to Authenticate and Authorizeour
users.
We used the web.xml to indicate we were using FORM based authenticationand the
SECURITY CONSTRAINTS were using role names that matched what the RDBMSRealms
were pulling from Oracle.
As I read the docs and look at the examples I see all the old stuffis
deprecated,
I do see I have the option of running in compatability mode - howeverI
don't
want to do this if this is not the way things will be done in the
future.
>>>
I followed the steps in the excellent post by Aaron Mulder "Weblogic7
RDBMS Realm
Procedure" and create my own Authentication provider, deployed it andit
seems
to be running. However I am now having problems getting the web.xmlto
"kick"
when I try and access a resticted resource I am not sent to my FORMBased
authentication
login page... shouldn't I be? I would think the security constraintswould
be
loaded correctly and same with the LOGIN config stuff and that WLSwould
just
use all the providers but that it would know what to do for thingslike
_security
check and all the contraints in the web.xml.
Am I going down the correct path? Do I just need to now write anAuthorization
provider too? In my test in my Authentication provider I put everyoneinto
the
"Administrators" group and use that in my web.xml. I would expect Iwould
be sent
to the login page first, then WLS would upon form submittal, checkthe
Authentication
provider, then my code would say all users are "Administrators", thenit
would
check that with the web.xml security constraint, then if the role
matched
would
send me on to the page.
Help :> I just want to get this working and make sure I am using thecorrect paradigm.
Thanks,
Jerry Rodgers -
When and how to update the "saved data" in report ?
Hi,
The BO version is "BusinessObjects Enterprise 12.0"
The case is that, some reports are uploaded withe saved data. while viewing the reports, the reports return the old data.
How to view the update data while click the "View" in CMC/InfoView ?
I have tried to schedule it , then can see the update data in "View the latest instance".
Is there any approach to refresh/update the saved data in the report ?
Thanks and regards,
Forest
Edited by: Forest lin on Dec 5, 2008 12:12 PMHello Forest lin,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk
Maybe you are looking for
-
HOW DO I RESTORE MY IPHOTO ON MACBOOK PRO
When i go to open iPhoto, I get a message that says " Your photo library is damaged or unreadable & can not be opened. Please restore from a backup" How do i restore and/or delete iPhoto and get a new version running? Thanks, D New
-
Editing Style Web Data Entry Form
Hi all, I tried to insert the specific style into the rows of a WDEF: Style: text-align:right; font-size:8pt but I don't know why, these specific styles aren't together applicable: I obtained ONLY one of these styles. Can anyone help me? Thanks
-
I'm thinking of getting a 4G Touch, and I'm wondering if it has a disc mode capability like my current 5G iPod. I am using the camera adapter to move images off my camera onto the iPod as a temporary 'on the road' storage device, is this possible wit
-
My phone will only charge upto 4%
my iphone 5 only charges up to the point when it turns on. once on the charging stops ive tried different plugs iphone charger wires everything but it still only charges to 4% any ideas why?
-
I have many folders named "images" in my favorites in Bridge. Is there a way to distinguish them, other than clicking on each one? It makes sense to name a folder "images" inside folder structure, but the favorits structure is flat, so perhaps there