Free diskspace check failed
Hi all
I am tring to install oracle RAC in Windows 2003 srver.I have creared 2 virtual pc.I follwed every step correctly coz the clusterware software installs upto vipca.After that i sudelny see a blue screen stating that the hardware failure .Now i am trng eith 2 virtual pcs.when i run runcluvfy.bat stage -pre crsinst -n RAC1,RAC2 -verbose
The error is
Free disk space in
Check: Free disk space in "C:\DOCUME~1\ADMINI~1.RAC\LOCALS~1\Temp" dir
Node Name Available Required Comment
RAC2 unknown 400MB (409600KB) failed
RAC1 10.79GB (11313436KB) 400MB (409600KB) passed
Result: Free disk space check failed.
System requirement failed for 'crs'.
what should i do.Thanks
Hi,
Firstly is node RAC2 is reachable?
Secondly is check the C: drive space, how much space left?
Cheers
FZheng
Similar Messages
-
Free diskspace check failed foe ecah node
Hi all
I am tring to install oracle RAC in Windows 2003 srver.I have creared 2 virtual pc.I follwed every step correctly coz the clusterware software installs upto vipca.After that i sudelny see a blue screen stating that the hardware failure .Now i am trng eith 2 virtual pcs.when i run runcluvfy.bat stage -pre crsinst -n RAC1,RAC2 -verbose
The error is
Free disk space in
Check: Free disk space in "C:\DOCUME~1\ADMINI~1.RAC\LOCALS~1\Temp" dir
Node Name Available Required Comment
RAC2 unknown 400MB (409600KB) failed
RAC1 10.79GB (11313436KB) 400MB (409600KB) passed
Result: Free disk space check failed.
System requirement failed for 'crs'.
what should i do.Thanks
Edited by: user12119634(bobs) on Dec 13, 2009 9:02 PMDefine virtual PCs. Provide full description of the technology, vendor, and version number. If this is another attempt to use unsupported technology like VMWare then you are going against what Oracle recommends and you are on your own.
Since you do not have a valid clusterware installation as indicated by the cluster verify tool this is a really good time to stop the installation and think through these two questions:
1. What is your shared storage solution? With Windows you only have a couple of possible choices none of which you have mentioned.
2. What is your cache fusion interconnect strategy?
If you don't get these right you are wasting your time.
SB ... I have no idea why you think this question is in the wrong forum. Can you explain? -
Memory gates checking failed because the free memory is less than 5% of total memory
· Business
Goal: Achieve a stable environment
· Repro
Steps: n/a
· Expected
Results: I expect the MSCRM Async services to use a relatively static amount of RAM
· Actual
Results: Over the weekend, the memory hit critical mass and CRM failed
· Environment:
Windows Server 2008, SQL Server 2008, CRM 2013 On Premise - both on the same box, Email Router is installed on the same box. We have not yet applied either of the two new UR for 2013.
I'm currently experiencing a memory leak in our production environment. I will fill out the details shortly.
Here's the error:
Log Name: Application
Source: System.ServiceModel 4.0.0.0
Date: 4/20/2014 11:39:14 PM
Event ID: 3
Task Category: WebHost
Level: Error
Keywords: Classic
User: NETWORK SERVICE
Computer: server.domain.com
Description:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/58366981
Exception: System.ServiceModel.ServiceActivationException: The service '/VisualWorkplace/XRMServices/2011/Organization.svc' cannot be activated due to an exception during compilation.
The exception message is:Memory gates checking failed because the free memory (1240145920 bytes) is less than
5% of total memory. As a result, the service will not be available for incoming requests. To resolve this, either reduce the load on the machine or adjust the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment config
element.. ---> System.InsufficientMemoryException: Memory gates checking failed because the free memory (1240145920 bytes) is less than 5% of total memory. As a result, the service will not be available for incoming requests. To resolve
this, either reduce the load on the machine or adjust the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment config element.
at System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
We just recently increased the available memory from 8GB to 24GB to help ensure that there is enough memory. This error never happened on CRM v4. According to the resource monitor, SQL is only reserving 20.7GB of RAM and there is 694MB of RAM in Standby.
The main Async service is using 660MB and the maintenance Async service is using 265MB.
To resolve the issue temporarily, I restarted both Async services this morning. Shortly after everything came back, they were holding fairly steady around 350MB and 200MB. It's been six hours since then.
The last time I spoke with Microsoft about a similar problem, they suggested increasing the amount of RAM.It became more and more of a problem. It was impacting the users in a more subtle way at first. You couldn't configure the CRM for Outlook client. After a while, they couldn't use CRM in Outlook at all and users reporting not being able to complete phone
call activities. I opened a ticket with MS and they suggested the same as Wilson Lou did. The organization error had nothing to do with the creep on the async services usage of RAM. It was indeed caused by SQL stealing all of the memory. Limiting the max usage
to 24GB RAM has resolved that error.
My Async processes are still using a LOT of RAM, but now that I have more than enough RAM, it doesn't seem to be a problem anymore. They are currently using about 700MB RAM each.
Also, I have upgraded to SP1, UR2.
Eric Hula - CRM Administrator -
How can I stop a task sequence if a custom HTA preflight check fails?
In our currently deployment method, we launch an HTA program before initiating the OSD process. This is only when run from the RAP menu, not via PXE. When a user initiates OSD through that menu, they get a message prompting them to close Outlook, and
a countdown of 5 mins, then OSD starts. They also have the ability to click on an 'OK' button to proceed on their own.
I've created a new script which checks WMI if Outlook and/or OCS are open, and if the machine is running on battery, spit out a "Failed" response and stop the HTA. I've also added a "recheck" button to re-do the check, and an 'OK
button if people jsut want to continue.
I'm curious if there is a way to prevent the task sequence from continuing if any of those conditions arent met. Currently it just pops up and says "Failed, Cannot conitue", but if they close the window, the task sequence thinks the program
has run, and the OSD migration starts. I'd like to be able and get the script to cancel the OSD process if a check fails.
Has anyone had success with this, using WINXP? I'd use the MS pre-flight check but it's only for WIN7.Interesting. Thanks for the response. Is there anybody out there that can assist with VBS part of the solution?
Here's the code I'm working with. Currently the battery piece isnt working as it should but I can figure that our, eventually. I'd like to get Jason's proposed solution in the code. If this isn't the right place, I'll take this somewhere
else.
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<title>OSD Preflight checks</title>
<HTA:APPLICATION
APPLICATIONNAME="OSD Preflight checks"
ID="objOSDPreReqChecks"
SCROLL="no"
CONTEXTMENU="no"
SINGLEINSTANCE="no"
MAXIMIZEBUTTON="no"
MINIMIZEBUTTON="no"
WINDOWSTATE="normal"/>
<!-- #region STYLEs-->
<style type="text/css">
H1{color:Black;text-align:center;font-family: Arial, Helvetica, sans-serif;font-size: 26px;}
p{font-family:"Arial";font-size:10px;}
fail{color:Red;text-align:center;}
.Version {float:left; font-size:1.0em;font-style:italic;color:#888888;font-weight:bold;}
.Header1 {width: 180px; text-align: right;font-weight:bold;}<!-- '1st column heading -->
H2 {font-family: Arial, Helvetica, sans-serif; text-align: center;}
H3 {font-style: italic;}
.style2 {width: 180px; text-align: left;}
.Header2 {width: 150px; text-align: right;font-weight:bold;}<!-- '2nd column heading -->
.style4 {width: 410px; text-align: left;}
.StatusBar
font-family: Arial, Helvetica, sans-serif;
text-align: center;
.hidden {display: none; visibility: hidden;}
</style><!-- #endregion -->
</head>
<script language="VBScript" type="text/vbscript">
'======================================================================================
' Script
' Version
' Purpose To check a machine is suitable for taking an OS deployment
'======================================================================================
'Features
' Modular design
' Verbose "Debug Mode"
' In-built data validation
' Custom error handling
' Custom error codes - 90x0
' Generic WMI handler
'BUGfix: Change CLng to CDbl to avoid overflow (in GetRAM)
'fixed - moved head section to top to become head > script > body
'fixed - fCheckModel display with leading ,
'fixed - fgetmodels dictionary list
Option Explicit
' #region GLOBAL DECLARATIONS: Persistent fold region
'======================================================================================
'GLOBAL Vars
'Things to just display (in GUI)
Dim strRAM
Dim strCPUInfo
Dim strCPUName
Dim strCPUDesc
Dim iCPUCount
Dim iCPUCoreCount
Dim iRAM
Dim strBIOSver, strBIOSDate, strBIOSInfo
'Time related
Dim TimerInterval 'timer to refresh HTA at start
Dim iTimer 'abort timer
Const iAbortTimeout=300000 'delay before window closes (in milliseconds)
Dim pbTimerID
Dim pbHTML
Dim pbWaitTime
Dim pbHeight
Dim pbWidth
Dim pbBorder
Dim pbUnloadedColor
Dim pbLoadedColor
Dim pbStartTime
'Dictionary
Dim objModelsDict,colKeys,strKey 'models
Dim objApprovedMakesDict
'Misc GLOBAL vars
Dim blnDebug 'set TRUE to trigger debug mode
Dim bAbortBuild 'Boolean flag to abort or not abort
Dim strTemp 'throwaway/scratch
Dim strNamespace 'wmi default namespace for ANY machine
Dim strComputer 'wmi reference to current machine, just .
Dim strService 'WMI service
Dim strQuery 'custom WQL
Dim ErrMsg 'custom error messages
Dim iErrMode 'State machine for error mode
Dim lFlags 'WMI flag
Dim strDisks
'Pre-requisites - things that will cause build to abort if values do not meet spec
Dim strHTAVendor 'Make of hardware
Dim strHTAVendorState
Dim strHTAModel 'Model of hardware
Dim strHTAModelState 'Model state
Dim strHTARAM 'RAM
Dim strHTARAMState 'RAM state
Dim strHTACPUSpeed 'Processor speed
Dim strHTACPUCores 'Number of cores
Dim strHTACPUFullInfo 'CPU + cores
Dim strHTAHDD 'Disk info
Dim strHTAHDDState 'Disk state
Dim strHTACheckRAW 'NTFS check
Dim strHTAArchitecture 'Processor support
Dim strHTAProduct 'Product ID
Dim strHTAOutlook 'Outlook running
Dim strHTAOutlookState 'Outlook state
Dim strHTABattery 'Battery check
Dim strHTABatteryState 'Battery state
'for WQL filters
Dim strWQLPCInfo 'Pre-req - (1) for various inc. domain role (servers)
Dim strWQLRAM 'Pre-req - (2) RAM
Dim strWQLCPU 'Pre-req - CPU speed string (not int)
Dim strWQLBootOrder 'Pre-req - Boot order string
Dim strWQLSATAMode 'Pre-req - HDD mode
Dim strWQLGenericBIOS
Dim strWQLCPUCount 'Pre-req - how many CPUs
Dim strWQLCPUInfo
Dim strWQLFSType 'Pre-req - Check HDD not RAW (i.e. is NTFS)
Dim strWQLDisks 'Disks
Dim strWQLChassis 'Machine type
Dim strWQLID 'Unique code from OEM
Dim strWQLProc 'is Outlook running = False
Dim strWQLBattery 'is on Battery = False
'State
Const cProblem = " Problem!"
Const cRunAgain =" RunCheck: Run System Check Again"
Const cSuccess = " Success!"
Const cPassed=" Pass"
Const cFail=" Fail"
'Pre-requisite to check: SET VALUES HERE vvvvvvvvvvvvvvvv
Const cApprovedOEM="Hewlett-Packard"
Const LegacyOEM1="Dell Inc."
Const LegacyOEM2="IBM"
Const cMinimumMemoryMB = 1000 'RAM in MB
'Const cMinimumMemoryMB = 1000000 'force fail test data RAM in MB
Const cMinFS="NTFS"
' Const cMinFS="HPFS" 'force fail test data
Const iMinCores=1
'Const iMinCores=10099 'force fail cores test data
Const iMinCPUSpeed=2 '20 'in GHz
'Const iMinCPUSpeed=90000 'in GHz
Const iMinCPUArch=32
'Const iMinCPUArch=64
' #endregion
' To hide anything use ID.className = "hidden", to show set to "", e.g. NotFoundArea.className = "hidden"
Sub Window_Onload
Err.Clear
VersionSpan.InnerText = objOSDPreReqChecks.Version 'Get version
self.focus
self.moveTo 100,100 'Move window top left
StatusBar.InnerText="Validating machine..."
document.body.style.cursor = "wait" 'hourglass cursor
'Call PreflightChecks 'use for testing as a VBS only, otherwise HTA timer will call below
TimerInterval = window.setInterval("PreflightChecks",10)
End Sub
Function PreflightChecks
' #region HEADER NOTES: Persistent fold region
'Version history
'ver 5 OCTOBER 2011 - added error handler
'ver 3rd Nov - removed HPonly queries
'// Solution: Custom Script for use with MDT - Adapted from hardwareinfo.vbs Mikael Nystrom – http://deploymentbunny.com
'Typical BIOS content
'Processor Speed = 2133/1066 MHz
'Boot Order = Network Controller,ATAPI CD-ROM Drive,USB device,Hard Drive,Diskette Drive,PnP Device #2,PnP Device #3,PnP Device #4,PnP Device #5,PnP Device #6,PnP Device #7,PnPe #8,PnP Device #9,PnP Device #10,PnP Device #11
'SATA (disk) mode: *IDE,--,RAID,-- or IDE,*AHCI,RAID
'On Error Resume Next
' #endregion
' #region CONSTANTS: Persistent fold region
'======================================================================================
'Fields available in HP BIOS
Const sAsset = "Notebook Asset Tag"
Const sOwner = "Notebook Ownership Tag"
Const sMan = "Manufacturer"
Const sNoteModel = "Notebook Model"
Const sCPU = "Processor Type"
Const sCPUSpeed = "Processor Speed"
Const sRAM = "Memory Size"
Const sModel = "Product Name"
Const sBIOSName ="System BIOS"
Const sBIOSVer = "BIOS Version"
Const sBIOSDate = "BIOS Date"
'Other BIOS stuff you could use too
'Const sOwnerTag = "Enter Ownership Tag"
'Const sBIOS = "PCID"
'Const sBIOS = "Define Custom URL"
'Const sBIOS = "Set Alarm Time"
'Const sBIOS = "PCID Version"
Const TextMode="1" 'text case sensitive for dict obj
'WMI core constants
Const wbemFlagReturnImmediately = 16 'wmi - Causes the call to return immediately.
Const wbemFlagForwardOnly = 32 'wmi - Causes a forward-only enumerator to be returned.
'Forward-only enumerators are generally much faster and
'use less memory than conventional enumerators, but don't allow calls to SWbemObject.Clone_
'Advisory config values - as in "you want to the change these"
Dim strHTABootOrder
Dim strHTASATAMode
'Dim strHTACPU
' #endregion
'======================================================================================
' #region WQL: Persistent fold region
lFlags = wbemFlagReturnImmediately + wbemFlagForwardOnly
'Queries of things to check (HP)
strWQLBootOrder = "select Name, value from HP_BIOSSetting where Name='Boot order'"
strWQLSATAMode = "select Name, value from HP_BIOSSetting where (Name='SATA emulation' or name='SATA device mode')"
strWQLDisks ="SELECT * FROM Win32_DiskDrive where mediatype like 'Fixed%hard disk%'" 'win32_disk only avail after W7
strWQLFSType ="SELECT * from Win32_LogicalDisk where DriveType='3'" 'only bother with HDDs
'Generic WMI query strings
strWQLGenericBIOS="SELECT Manufacturer,SMBIOSBIOSVersion,ReleaseDate FROM Win32_BIOS WHERE PrimaryBIOS = True"
strWQLCPUCount= "SELECT NumberOfProcessors,NumberOfLogicalProcessors from Win32_ComputerSystem"
strWQLCPUInfo="SELECT Name,DataWidth,description,MaxClockSpeed,NumberofCores,NumberOfLogicalProcessors from Win32_Processor"
strWQLPCInfo="SELECT Domain,DomainRole,SystemType,Manufacturer,Model,TotalPhysicalMemory FROM Win32_ComputerSystem"
' strWQLPCInfo="SELECT Domain,DomainRole,SystemType,Manufacturer FROM Win32_ComputerSystem"
strWQLChassis="SELECT ChassisTypes from Win32_SystemEnclosure"
strWQLID="SELECT IdentifyingNumber,UUID from Win32_ComputerSystemProduct"
strWQLRAM="SELECT * FROM Win32_PhysicalMemory"
strWQLProc="SELECT * FROM Win32_Process"
strWQLBattery="SELECT * FROM BatteryStatus Where Voltage > 0"
' #endregion
' #region MAIN algorithm
'=====================================================================================================
' MAIN
'Algorithm
'1) Check make (vendor)
'2) Check model (in list)
'3) Check RAM >x
'4) Check HDD TYPE (HDD is not RAW)
'5) Check CPU architecture
'6) Check outlook
'7) Check battery
'=====================================================================================================
'Initialise
window.clearInterval(TimerInterval) 'Reset timer to 0
' blnDebug=True
blnDebug=False
bAbortBuild=False 'default to DON'T abort
' bAbortBuild=True
'Build list of approved vendors
Set objApprovedMakesDict = CreateObject("Scripting.Dictionary")
objApprovedMakesDict.comparemode=VBTextCompare
objApprovedMakesDict.add cApprovedOEM,"OK"
objApprovedMakesDict.add LegacyOEM1,"OK"
objApprovedMakesDict.add LegacyOEM2,"OK"
objApprovedMakesDict.add "Lenovo","Testdata"
If blnDebug Then Stop
'1) all machines check make
strHTAVendor=fCheckVendor(strWQLGenericBIOS) 'check vendor in BIOS - if vendor not approved ABORT without proceeding
If bAbortBuild=True Then
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "FATAL ERROR - goodbye cruel world"
iTimer = window.setTimeout("Abort", iAbortTimeout, "VBScript")
Else
StatusBar.InnerText="Vendor: " & strHTAVendor & vbTab & " " & strHTAVendorState
'2) Discover current Model
strHTAModel=fGetModelName(strWQLPCInfo) 'get model name from WMI
strHTAModel=fUniversalCheckData(strHTAModel,"'Discover Model - fGetModelName'") 'validate
Call fGetModels 'get list of all valid models (from text file)
strHTAModel=fCheckModel(strHTAModel)
'2a) Model number (optional)
strHTAProduct=fGetComputerSystemProdIDNumber(strWQLID) 'manufacturer's product ID
strHTAProduct=fUniversalCheckData(strHTAProduct,"'Discover ID - fGetComputerSystemProdIDNumber'")
' StatusBar.InnerText=StatusBar.InnerText & VbCrLf & vbTab & "Product Code: " & vbTab & strHTAProduct
'3) Check installed Memory
strHTARAM=fGetRAM(strWQLRAM) 'find RAM size
strHTARAM=fUniversalCheckData(strHTARAM,"'Detect RAM - fCheckRAM'")
strHTARAM=fCheckRAM(strHTARAM) 'check RAM meets req
If strHTARAMState=cFail Then Exit Function
'4) Disk format IS NTFS
strDisks=fGetDrives(strWQLFSType) 'Get formatting info for all drives
strHTACheckRAW=fUniversalCheckData(strDisks,"'Detect filesystem - fCheckNTFS'") 'Validate data
strHTACheckRAW=fCheckNTFS(strDisks) 'Check FS format is acceptable (not RAW)
If strHTACheckRAW=cFail Then Exit Function
'Generic CPU calls
strHTACPUFullInfo="CPUs:" & fGetCPUInfo(strWQLCPUInfo) & " with CPU cores:" & iCPUCoreCount
strBIOSInfo="BIOS version: " & strBIOSver & ", dated " & strBIOSDate
'5a) CPU Speed check (info from http://www.robvanderwoude.com/wmiexamples.php)
strCPUInfo=WMI(strWQLCPUInfo,strNamespace) 'Get CPU details
strTemp=split(strCPUInfo,"@"): strHTACPUSpeed=strTemp(1)
strHTACPUSpeed=fUniversalCheckData(strHTACPUSpeed,"'Check processor - fCheckCPUSpeed'") 'Validate data
strHTACPUSpeed=fCheckCPUSpeed(strHTACPUSpeed) 'Check CPU clock speed
'5b) cores check
strHTACPUCores=fUniversalCheckData(iCPUCoreCount,"Check core count - fCheckCores") 'Validate data
iCPUCoreCount=fCheckCores(iCPUCoreCount) 'pass or fail?
'5c) CPU address width
strHTAArchitecture=fUniversalCheckData(strHTAArchitecture,"Check core count - fCheckCores") 'Validate data
strHTAArchitecture=fCheckCPUArch(strHTAArchitecture)
'6) Check outlook
strHTAOutlook=fCheckProcess(strWQLProc)
'7) Check Battery
strHTABattery=fCheckBattery(strWQLBattery)
'end checkss
document.body.style.cursor = "default"
'Display hardware values in GUI (in table)
Vendor.innerhtml = strHTAVendor 'Use str...var..STATE if you want Pass/fail text instead
Model.innerhtml = strHTAModel
Product.innerhtml = strHTAProduct
RAM.innerhtml = strHTARAM
CPUspeed.innerhtml = strHTACPUSpeed
CPUInfo.innerhtml = strHTACPUFullInfo
HDDFS.innerhtml = strHTACheckRAW
CapableArchitecture.innerhtml=strHTAArchitecture
BIOSversion.innerhtml = strBIOSver
BIOSDate.innerhtml = strBIOSDate' CPUName.innerhtml = strCPUDesc 'GetCPUName
End If
'======================================================================================
' #endregion
End Function
'generic WMI queries, by field and namespace
Function WMI(strQuery,strNameSpace)
'Aim: generic WMI calls
'return value of BIOS
On Error Resume Next
Dim colItems,objItem
Dim objWMI
Const strService = "winmgmts:{impersonationlevel=impersonate}//" 'binding to WMI
Const strComputer = "." 'this machine
Set objWMI = GetObject(strService & strComputer & strNamespace) 'GLOBAL wmi
Set colItems = objWMI.ExecQuery(strQuery,,lFlags)
For Each objItem In colItems
If Err Then
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "WMI query: " & strQuery & " in " & strNamespace & objItem.Name
Call ErrHandler("WMI error " & strQuery,1)
Else
WMI=objItem.Name 'Return value
End If
Next
End Function
Function fGetModelName(strWQLPCInfo)
'Aim: Get model name from BIOS - WMI field sometimes varies if laptop, so try two
'Return STRING: Model string from BIOS or "UNKNOWN" if null
On Error Resume Next
Dim colPCInfo,objPCItem
Dim strModel
Set colPCInfo = GetObject("winmgmts:").ExecQuery(strWQLPCInfo,"WQL",lFlags)
If Err Then
Call ErrHandler("fGetModelName: Error querying WMI " & strWQLPCInfo,2)
Else
For Each objPCItem In colPCInfo
If Not IsNull(objPCItem.Model) Then
strModel=objPCItem.Model
' iRAM=objPCItem.TotalPhysicalMemory
Else
If (strHTAVendor=cApprovedOEM And IsLaptop = True) Then ' resort to HP specific query for older laptops
'Notebook
strModel=QueryHPBIOS(sNoteModel)
if strModel="" then strModel=QueryHPBIOS(sModel) 'try alt value
Else
strModel=QueryHPBIOS(sModel)
End If
End If
Next
End If
If strModel = "" Then
fGetModelName = "UNKNOWN"
Model.style.visibility="hidden"
Else
fGetModelName=strModel
End If
End Function
'====================================================
'====================================================
Function fGetRAM(strQuery)
'Aim: get RAM installed. NB Win32_ComputerSystem::TotalPhysicalMemory may not be accurate
'Return integer
On Error Resume Next 'equiv to Err.Clear
Dim colItems, item
Dim iTotalMemory
Set colItems = GetObject("winmgmts:").ExecQuery(strQuery,"WQL",lFlags)
If Err Then
Call ErrHandler("fGetRAM: Error querying " & strQuery,2)
Else
iTotalMemory = 0
For Each item In colItems
iTotalMemory = iTotalMemory + CDBL(item.Capacity)/(1024^2)
Next
End If
If iTotalMemory = "" Then
fGetRAM = "RAM UNKNOWN"
RAM.style.visibility="hidden"
Else
fGetRAM=iTotalMemory
End If
End Function
'====================================================
'====================================================
Function fGetCPUInfo(strQuery)
'Aim: query WMI for CPU info - number and number of cores
'Return: function=CPU count, var for the cores: iCPUCoreCount, strHTAArchitecture, strCPUDesc
On Error Resume Next
Dim colItems, objItem
Dim NumberOfProcessors
Set colItems = GetObject("winmgmts:").ExecQuery(strQuery,"WQL",lFlags)
If Err Then
Call ErrHandler("GetCPUInfo: Error querying " & strQuery,2)
Else
For Each objItem In colItems
If Err Then
Else
If Not IsNull(objItem.NumberOfCores) Then
NumberOfProcessors = Trim(objItem.NumberOfCores) 'NumberOfProcessors
End If
If Not IsNull(objItem.NumberOfLogicalProcessors) Then
iCPUCoreCount = Int(Trim(objItem.NumberOfLogicalProcessors))
End If
If Not IsNull(objItem.DataWidth) Then
strHTAArchitecture=Trim(objItem.DataWidth) & "-bit"
End If
If Not IsNull(objItem.description) Then
strCPUDesc = Trim(objItem.description) 'cpu name
End If
End If
Next
If NumberOfProcessors = "" Then
NumberOfProcessors = "UNKNOWN"
End If
fGetCPUInfo = Int(NumberOfProcessors)
' iCPUCoreCount = Int(NumberOfLogicalProcessors)
End If
End Function
'====================================================
'====================================================
Function fGetComputerSystemProdIDNumber(strWQLID)
'Aim: Get UUID from Win32_ComputerSystemProduct
'Return: great big integer
Dim colSys,objSys
Dim strUUID
On Error resume next
Set colSys = GetObject("winmgmts:").ExecQuery(strWQLID,"WQL",lFlags)
If Err then
Call ErrHandler("fGetComputerSystemProdIDNumber: Error querying " & strWQLID,2)
Else
For Each objSys In colSys
If Not IsNull(objSys.IdentifyingNumber) Then
strUUID = Trim(objSys.IdentifyingNumber)
End If
Next
If strUUID = "" Then
fGetComputerSystemProdIDNumber = "UNKNOWN"
Else
fGetComputerSystemProdIDNumber = strUUID
End If
End If
End Function
'=================================================================================
'=================================================================================
Function fGetDrives(strQuery)
Dim colDisks,objHDD
Dim strDriveType, strDiskSize, strDisk
Dim strDiskFSType
Dim iGBUnits
On Error Resume Next
iGBUnits=1073741824
Dim iRAW
iRAW=0
Set colDisks = GetObject("winmgmts:").ExecQuery(strQuery)
For Each objHDD In colDisks
Select Case objHDD.DriveType
Case 1 strDriveType = "Drive could not be determined."
Case 2 strDriveType = "Removable Drive"
Case 3 strDriveType = "Local hard disk."
Case 4 strDriveType = "Network disk."
Case 5 strDriveType = "Compact disk (CD)"
Case 6 strDriveType = "RAM disk."
Case Else strDriveType = "Drive type Problem."
End Select
strDiskFSType = objHDD.FileSystem
'Find C
If objHDD.Name="C:" Then
If isNull(objHDD.FreeSpace) Then
If blnDebug=True then Call ErrHandler("ALERT!! Volume " & objHDD.Name & "is RAW",1) 'Abort/clean
fCheckDrives="ALERT!! Volume " & objHDD.Name & "is RAW"
End If
End If
strDiskSize = Int(objHDD.Size /iGBUnits) & "GB" 'calc size of disk
strDisk = strDisk & VbCrLf & "Vol " & objHDD.Name & " (" & strDriveType & ") size: " & strDiskSize & " (free: " & Int(objHDD.FreeSpace /iGBUnits) & "GB), " & strDiskFSType
fGetDrives=strDisk
Next
If (Err.Number <>0) Then
Call ErrHandler("WMI Property Query Error: [" & Err.Number & "]",2)
fGetDrives = -1
Exit Function
End If
End Function
'=================================================================================
'=================================================================================
Function fUniversalCheckData(varData,strStage) 'template
'Aim: Check value passed...
'is not blank
'is in range x..y
'spelt OK
'is in a list
'format is text, numeric
'return: string: the original value
On Error Resume Next
Dim Err
if blnDebug Then StatusBar.InnerText = StatusBar.InnerText & VbCrLf & "Validating " & strStage & " data..."
If Err Then
Call ErrHandler("WARNING: Error discovering value in " & strStage,2) '1=Quit,2=Warn
strHTAModel="Unknown"
Else
Select Case varData
Case IsEmpty(varData) Or IsNull(varData)
Call ErrHandler("WARNING: Error in "& strStage,2) '1=Quit,2=Warn
fUniversalCheckData="Unknown"
Case IsNumeric(varData)
If varData<0 Then
Call ErrHandler("WARNING: Value negative"& strStage,2) '1=Quit,2=Warn
fUniversalCheckData="Unknown"
End if
' & varData &
Case IsDate(varData)
Case Else
fUniversalCheckData=varData 'Data OK - return value unchanged
End Select
End If
End Function
'=================================================================================
'Checks - follow if true DO, if false warn/abort
'=================================================================================
Function fCheckBattery(strQuery)
'Aim: Find if battery is running
'Return pass/fail
On Error Resume Next 'equiv to Err.Clear
Const wbemFlagReturnImmediately = &h10
Const wbemFlagForwardOnly = &h20
Dim colItems, item
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\WMI")
Set colItems = objWMIService.ExecQuery("SELECT * FROM BatteryStatus Where Voltage > 0", "WQL", _
wbemFlagReturnImmediately + wbemFlagForwardOnly)
For Each item In colItems
if objItem.PowerOnline = True Then
strHTABattery=objItem.PowerOnline
strHTABatteryState = cFail
Err.Raise 9010,"fCheckBattery",strHTABattery & " Laptop running on battery. OSD Cannot continue."
Call ErrHandler(ucase(strHTABatteryState) & ": " & Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1)
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "FATAL ERROR - Laptop on Battery. Please plug into an outlet before proceeding."
iTimer = window.setTimeout("Abort", iAbortTimeout, "VBScript")
Else
strHTABatteryState = cPassed
End if
Next
fCheckBattery=strHTABattery
End Function
'====================================================
Function fCheckProcess(strQuery)
'Aim: Find if outlook is running
'Return pass/fail
On Error Resume Next 'equiv to Err.Clear
Dim colItems, item
Set colItems = GetObject("winmgmts:").ExecQuery(strQuery,"WQL",lFlags)
For Each item In colItems
if item.Name = "OUTLOOK.EXE" Then
strHTAOutlook=item.Name
strHTAOutlookState = cFail
Err.Raise 9010,"fCheckOutlook",strHTAOutlook & " running. OSD Cannot continue."
Call ErrHandler(ucase(strHTAOutlookState) & ": " & Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1)
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "FATAL ERROR - Outlook Running, please close outlook before proceeding."
iTimer = window.setTimeout("Abort", iAbortTimeout, "VBScript")
Elseif item.Name = "communicator.exe" Then
strHTAOutlook=item.Name
strHTAOutlookState = cFail
Err.Raise 9010,"fCheckOutlook",strHTAOutlook & " running. OSD Cannot continue."
Call ErrHandler(ucase(strHTAOutlookState) & ": " & Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1)
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "FATAL ERROR - Communicator Running, please close OCS before proceeding."
iTimer = window.setTimeout("Abort", iAbortTimeout, "VBScript")
Else
strHTAOutlookState = cPassed
End if
Next
fCheckProcess=strHTAOutlook
End Function
'====================================================
'1 - Make
Function fCheckVendor(strVendor)
'Aim: Check make is one the OS/build is designed For
'Return: STRINGS for "Make", BIOS version and BIOS date (generic): strHTAVendorState pass or fail
On Error Resume Next
Dim colItems,objItem
Set colItems = GetObject("winmgmts:").ExecQuery(strVendor, "WQL", lFlags)
For Each objItem In colItems
strHTAVendor=objItem.Manufacturer
if objApprovedMakesDict.exists(strHTAVendor) then
strBIOSver=objItem.SMBIOSBIOSVersion
strBIOSDate=Mid( objItem.ReleaseDate, 5, 2 ) & "/" & Mid( objItem.ReleaseDate, 7, 2 ) & "/" & Left( objItem.ReleaseDate, 4 )
strHTAVendorState=cPassed
Else
strHTAVendorState=cFail
Err.Raise 9010,"fCheckVendor",strHTAVendor & " found. The build will not work on this make of hardware"
Call ErrHandler(ucase(strHTAVendorState) & ": " & Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1)
bAbortBuild=True
end if
Next
fCheckVendor=strHTAVendor
End Function
'=================================================================================
'=================================================================================
'2 - Models check
Function fCheckModel(strThisModel)
'Aim Check target machine is in list of models
'Return string
On Error Resume Next
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "Checking model..." & VbCrLf
If objModelsDict.exists(trim(strThisModel)) then ' if current model in objDict then huzzah
strHTAModelState=cPassed
StatusBar.InnerText=StatusBar.InnerText & vbTab & "Model detected: " & vbTab & strHTAModelState
Else
strHTAModelState=cFail
Err.Raise 9010,"fCheckModel",strThisModel & " found. The build will not work on this model of hardware"
Call ErrHandler(ucase(strHTAModelState) & ": " & Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1)
end if
fCheckModel=strHTAModel
End Function
'=================================================================================
'=================================================================================
'3 - RAM
Function fCheckRAM(strRAM)
'Aim: Check installed RAM > x
'Return string digits with units, e.g. 4GB
'use strHTARAM for value
'==================================================================
' Memory Preflight Check (from MDT2012)
'==================================================================
On Error Resume Next
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "Checking RAM..."
If Err.Number <> 0 Then
Call ErrHandler("Error occurred while calculating computer's memory.",2)
End If
fCheckRAM = Int(strRAM/1024) & "GB" 'format in GB
If Int(strRAM) > cMinimumMemoryMB Then
strHTARAMState=cPassed 'Sufficient memory - show whole number in GB"
StatusBar.InnerText=StatusBar.InnerText & vbTab & "RAM installed: " & vbTab & strHTARAMState
Else
strHTARAMState=cFail
Err.Raise 9030 ,"fCheckRAM","Not enough memory in this machine!" & " Required physical memory is: " & cMinimumMemoryMB & " MB."
Call ErrHandler(ucase(strHTARAMState) & ": " & Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1) 'abort build
End If
End Function
'=================================================================================
'=================================================================================
'4 - NTFS disk
Function fCheckNTFS(strDiskFS)
'Aim: Check HDD is NTFS
'Return string
On Error Resume Next
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "Checking file system is not RAW..."
If Instr(1,strDiskFS,cMinFS,VBTextCompare)<>0 Then
fCheckNTFS=cMinFS 'disk format is OK (NTFS)
StatusBar.InnerText=StatusBar.InnerText & vbTab & " File system: " & cPassed
Else
fCheckNTFS=cFail
Err.Raise 9040 ,"fCheckNTFS","WARNING: Disk not correct file-system. Type required is: " & cMinFS & "." & VbCrLf & _
"The deployment will fail unless you reformat the target disk immediately."
Call ErrHandler(Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",2) 'halt build
End If
End Function
'====================================================
'=================================================================================
'5 - CPU checks
'=================================================================================
Function fCheckCPUSpeed(strCPU) 'any HW
'Aim: Check CPU speed
'Return string = number + appropriate units, e.g. 5HGz (strCPU)
On Error Resume Next
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "Checking CPU spec..."
Select Case Right(strCPU,3) 'check units
Case "MHz"
strCPU=Left(strCPU,4)/1000 'reformat to GHz
Case "GHz"
strCPU=strCPU 'unit already OK
Case Else
Call ErrHandler("CPU units are unknown",2)
End Select
'Check clock speed
If Int(Left(trim(strCPU),1))>=iMinCPUSpeed Then
fCheckCPUSpeed=strHTACPUSpeed 'CPU is fine i.e don't change value
StatusBar.InnerText=StatusBar.InnerText & vbTab & "CPU Speed: " & cPassed
Else
fCheckCPUSpeed=cFail 'already in GHz
Err.Raise 9050,"fCheckCPUSpeed","CPU speed pre-requisite failed. Minimum processor clock speed is: " & iMinCPUSpeed
Call ErrHandler(Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1) 'halt build
End If
End Function
'=================================================================================
'=================================================================================
Function fCheckCPUArch(strCPUArch) 'any HW
'Aim: Check CPU width
'Return string
On Error Resume Next
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "Checking CPU bus width..."
'Check clock speed
If Int(Left(trim(strCPUArch),2))>=iMinCPUArch Then
fCheckCPUArch=strHTAArchitecture 'CPU is fine i.e don't change value
StatusBar.InnerText=StatusBar.InnerText & vbTab & "CPU width: " & cPassed
Else
fCheckCPUArch=cFail 'already in GHz
Err.Raise 9052,"fCheckCPUArch","CPU width pre-requisite failed. Minimum processor width required is: " & iMinCPUArch
Call ErrHandler(Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1) 'abort build
End If
End Function
'=================================================================================
Function fCheckCores(iCores)
'Aim: Check hardware (CPU) has a minimum number of cores
'Return Integer
On Error Resume Next
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "Checking CPU cores..."
If iCores>=iMinCores Then
fCheckCores=iCores
StatusBar.InnerText=StatusBar.InnerText & vbTab & "Core count: " & vbTab & cPassed
'StatusBar.InnerText=StatusBar.InnerText & vbTab & "CPU cores: " & cPassed
Else
fCheckCores=cFail
Err.Raise 9051,"fCheckCores","WARNING: Not enough cores on the CPU to support the build. Minimum CPU cores is: " & iMinCores
Call ErrHandler(Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",2) 'halt build
End If
End Function
'=================================================================================
'=================================================================================
Function fCheckHPCPUSpeed 'HP ONLY
'Aim: Check CPU speed
'return: string
'Check CPU speed
On Error Resume Next
strWQLCPU = "processor speed"
strTemp=QueryHPBIOS(strWQLCPU,"")
Select Case Right(strTemp,3)
Case "MHz"
strTemp=Left(strTemp,4)/1000 'reformat to GHz
Case "GHz"
strTemp 'is OK
Case Else
Call ErrHandler("CPU is unknown",2)
End Select
'Check clock speed
If strTemp>=iMinCPUSpeed Then
fCheckCPUSpeed= strTemp & "GHz"
Else
Err.Raise 9050,,"CPU speed pre-requisite failed"
Call ErrHandler("CPU is too slow",1)
fCheckCPUSpeed=cFail 'already in GHz
End If
End Function
'=================================================================================
'=================================================================================
Function fGetModels
'Aim: Read external text file
'return: dictionary object - models as key, integer as value e.g. Dell Optiplex,12
'On Error Resume Next
Dim objFSO
Dim objFile
Dim strFile
Dim strEntry
Dim n
Dim strfilepath
Dim iLineCount 'count lines to avoid listing first item with ,.
Set objModelsDict = CreateObject("Scripting.Dictionary")
set objFSO=CreateObject("Scripting.FileSystemObject")
Const ForReading=1
strfilepath = Left(window.location.pathname,InStrRev(window.location.pathname,"\"))
strFile=strfilepath & "Models.txt"
set objFile=objFSO.OpenTextFile(strFile,ForReading)
iLineCount=0
'read in each line of data until you reach the end of the file
do While objFile.AtEndOfStream<>True
strEntry=objFile.ReadLine
'you can now do what ever you want with the line as referenced with the strEntry variable such as
'echoing it back (e.g. wscript.Echo strEntry) or passing it as a variable to a function of subroutine (e.g. MyFunction strEntry)
objModelsDict.comparemode=VBTextCompare
objModelsDict.Add strEntry,iLineCount
iLineCount=iLineCount+1
If blnDebug then
If iLineCount=1 Then
StatusBar.InnerText=trim(strEntry)
Else
StatusBar.InnerText=StatusBar.InnerText & ", " & trim(strEntry) 'list models
End If
End If
Loop
objFile.Close
End Function
'=================================================================================
'=================================================================================
'====================================================
Function ErrHandler(strErrorMsg,iErrMode)
'Aim: to handle error states
' 1 = Abort
' 2 = Warn
'Return 'Appropriate text message explaining the error
'====================================================
Const msgTitle="SCCM Deployment Preflight Checklist"
'On Error Resume Next '< don't use that as we want to KEEP the error properties
'Abort=1
If iErrMode=1 Then
StatusBar.InnerText=strErrorMsg 'overwrite status with Error message
' StatusBar.InnerText=StatusBar.InnerText & VbCrLf & " " & strHTAOutlook & " " & strHTAVendor & " " & strHTAVendorState & _
' VbCrLf & " " & strHTAModel & strHTAModelState & _
' VbCrLf & " " & strHTARAM & strHTARAMState & _
' VbCrLf & " " & strHTAHDD & strHTAHDDState
iTimer = window.setTimeout("Abort", iAbortTimeout, "VBScript") 'Abort (close) after n seconds
'MsgBox strErrorMsg,vbExclamation,msgTitle
'ErrBar.class=""
ElseIf iErrMode=2 Then
'Warning
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & strErrorMsg & " " '& "(" & Err.Description & " :" & Err.Number & ")"',vbExclamation,msgTitle
Err.Clear
End If
End Function
'====================================================
Sub Abort
'Aim: Quit gracefully
window.close()
End Sub
</script>
<!-- #region BODY -->
<body>
<br />
<div>
<span style="version"> <span id="VersionSpan"></span></div>
<div style="text-align: center;">
<H1 style="font-family: Arial, Helvetica, sans-serif; font-size: large; text-align: center; color: #000000; text-transform: capitalize">System information</H1>
<span>
<table border="1" cellspacing="0" cellpadding="0" style="width: 912px"
id="SysInfoTable">
<tr class="h1">
<td align="right" class="Header1" style="width: 76px; height: 18px">
</td>
<td align="right" class="Header1" style="height: 18px"><em id="VendorCaption">Vendor</em></td>
<td align="left" class="style2" style="height: 18px"><span id="Vendor"></span></td>
<td align="right" class="Header2" style="height: 18px"><em id="ModelCaption">Model</em></td>
<td align="center" class="style4" style="width: 400px; height: 18px"><span id="Model"></span></td>
</tr>
<tr>
<td align="right" class="Header1" style="width: 76px">
</td>
<td align="right" class="Header1"><em id="ProductCaption">Product ID</em></td>
<td align="left" class="style2"><span id="Product"></span></td>
<td align="right" class="Header2"><em id="RAMCaption">Memory(in MB)</em></td>
<td align="left" class="style4" style="width: 400px"><span id="RAM"></span></td>
</tr>`
<tr>
<td align="right" class="Header1" style="width: 76px">
</td>
<td align="right" class="Header1"><em id="CPUCaption">CPU speed (in GHz)</em></td>
<td align="left" class="style2"><span id="CPUspeed"></span></td>
<td align="right" class="Header2"><em id="CPUInfoCaption">No: CPU\Cores</em></td>
<td align="left" class="style4" style="width: 400px"><span id="CPUInfo"></span></td>
</tr>
<tr>
<td align="right" class="Header1" style="width: 76px">
</td>
<td align="right" class="Header1"><em id="DiskFSCaption">Filesystem info</em></td>
<td align="left" class="style2"><span id="HDDFS"></span></td>
<td align="right" class="Header2"><em id="CapableArchCaption">Architecture</em></td>
<td align="left" class="style4" style="width: 400px"><span id="CapableArchitecture"></span></td>
</tr>
<tr>
<td align="right" class="Header1" style="width: 76px">
</td>
<td align="right" class="Header1"><em id="BIOSVerCaption">BIOS version</em></td>
<td align="left" class="style2" ><span id="BIOSVERSION"></span></td>
<td align="right" class="Header2"><em id="BIOSDateCaption">BIOS Date</em></td>
<td align="left" class="style4" style="width: 400px"><span id="BIOSDate"></span></td>
</tr>
</table>
</span>
</div>
<div class="StatusBar">
<br />
<Span id="StatusBar">Loading...please wait.</Span>
</div> <br><br>
<div align="center">
<input type="button" name="btnStop" id="btnStop" value="Continue" onclick="Abort">
<input type="Button" value="Re-Scan Machine" name="button1" onClick="Window_Onload" class="button">
</div>
</body><!-- #endregion -->
</html> -
Seagate external drive: Partition map check failed because no slices were found
I have a 3TB Seagate Expansion external backup drive connected to my Retina Macbook Pro via USB. The disk will not eject from a regular Finder window - it will only eject from Disk Utility. Backups seem to otherwise be running fine. I tried to verify/repair the disk in Disk Utility, and I got the following error: "Partition map check failed because no slices were found." I am able to verify/repair the partition without any problem, and no errors are found.
I'm concerned about relying on a backup drive that may be heading south. Here is the output from diskutil info:
diskutil info disk3
Device Identifier: disk3
Device Node: /dev/disk3
Part of Whole: disk3
Device / Media Name: Seagate Expansion Desk Media
Volume Name: Not applicable (no file system)
Mounted: Not applicable (no file system)
File System: None
Content (IOContent): GUID_partition_scheme
OS Can Be Installed: No
Media Type: Generic
Protocol: USB
SMART Status: Not Supported
Total Size: 3.0 TB (3000592977920 Bytes) (exactly 5860533160 512-Byte-Units)
Volume Free Space: Not applicable (no file system)
Device Block Size: 4096 Bytes
Read-Only Media: No
Read-Only Volume: Not applicable (no file system)
Ejectable: Yes
Whole: Yes
Internal: No
OS 9 Drivers: No
Low Level Format: Not supported@ Allan Eckert: Unfortunately, reformatting is out of the question, I have 5 years of work on this!
@ Loner T: Yes, the firmware did successfully upgrade after router reboot and a bit of troubleshoot.
Thanks for the quick replies. Keep 'em coming! -
Disk Utility Reports Volume Check Failed
I've been having some trouble with one of my two internal hard drives, so by mistake I ran Disk Utility from the Panther install disk on my PowerPC G5 running 10.4.10...I didn't realize until after I'd run Disk Repair that it wasn't the Tiger install disk I was using.
The Disk Repair Utility from the 10.3 install disk reported an "Invalid Leaf Record Count(it should be 41 instead of 210)". It also said that "2 HFS Volumes Repaired, 1 Volume Could Not Be Repaired". This was particularly puzzling since there were only two partitions on that internal hard drive. What was this other Volume it referred to?
Upon realizing that I was using an old CD, I ran Disk Utility from the Tiger install disk, and got a report "Invalid Catalog Record Type. Volume Check Failed."
Can anyone shed any light on what this all means, and how I can fix it?
Many thanks in advance!
-ZinaThanks, abrody, for your reply. First, I ws lucky in that there was no indication other than Retrospect reporting a problem with this, the client machine, so all data was available and the system seemed to be working fine (other than the error report).
Here's what worked for me: I ran Disk Repair (from the Tiger install disk)on all 4 partitions on my second internal HD, and came up with a clean report. I erased one of the partitions and, using SuperDuper, I cloned the system partition from the troublesome partition on the other internal HD. Then I ran Disk Repair from the install disk again, on the cloned partition, to be sure I didn't carry over the problem with the clone. It came up clean.
Then I erased the troublesome system partition and cloned the system back over from the trouble-free partition clone.
I ram Disk Repair again from the install disk, just to make sure everything came up with a clean bill of health, which it did.
But I'm going to keep a close eye on this internal HD, since I think it's possible it's failing. I always back up all my data every night, so at least I'm covered there.
Again, thanks so much for your reply and help.
Message was edited by: Zina
Message was edited by: Zina -
LMS3.1 psu problem - Consistency check failed for base package ...AG
Hello,
We've got a package updater problem with a LMS3.1 installation.
1. After trying to update RME Device packages from GUI we got a message that LibCommon-v2.3.2 is needed
2. We tried to update LibCommon from CLI using psucli.bat, see below
3. We found a discussion in this forum, simular to this problem with the hint to reinstall the RME, what we did but with no improvement
4. We deinstalled, reboot, did a new installation of LMS3.1. But the problem still exists, with same message. We need the PSU, because most of our devices will be managed after device package update only.
Updating of each package brings warnings with pseudo package names, as ImageAG, MemoryAG and not with hints to real missing packages:
C:\lms\bin>psucli -p rme -install -src C:\install\lm31-updates\ LibCommon
WARNING: LibCommon(2.3.2):Consistency check failed for base package ImageAG
see also the psu.log containing all tryes of package updates
The problem goes a little bit in this direction, but with a new reinstallation as well:
https://supportforums.cisco.com/message/669047#669047
What can we do?
thx for hints, SteffenWhen you install LMS on Windows, there are some recommended steps to take to ensure the installation is a problem free as possible:
Set the per-user and global TEMP and TMP environment variables to short values (e.g. C:\WINDOWS\TEMP)
Disable all anti-virus software
Disable Windows Data Execution Protection (DEP)
Login to the server as a local Adminitrator
Install from original, locally attached media
NEVER abort the installation after the installer says not to
Based on the symptoms described here, I'm guessing at least the first item was not done. TAC has a procedure to recover a bad RME package repository, but if the base installation is problematic, doing so would be moot. If you suspect the installation isn't 100% (beyond the package repository), uninstall, then follow the above steps to reinstall.
If you think the problem is just with the RME package repository, contact TAC, and they can provide you a good, up-to-date repository to jump start things for you. -
[SOLVED] "Filesystem check failed" during boot process
I was using XFCE on my netbook recently and clicked "shutdown". It logged out to the command prompt and nothing happened. Assuming that I'd clicked "logout" by mistake, I typed "pacman -Syu" to run an update... And moments later it suddenly started the shutdown process.
Now, whenever I boot up, I see the message below. I tried booting from a GParted CD to check the filesystems for errors, but none were detected.
Can anyone suggest what I might need to do to fix the problem?
rootfs: clean, 11026/246512 files, 477083/984576 blocks
home: clean, 4386/527280 files, 237183/2105344 blocks
/dev/sdb2 is mounted. e2fsck: Cannot continue, aborting.
************* FILESYSTEM CHECK FAILED ************
* Please repair manually and reboot. Note that the root
* file system is currently mounted read-only. To remount
* it read-write type: mount -n -o remount,rw /
* when you exit the maintenance shell the system will
* reboot automatically.
Give root password for maintenance
(or type Control-D to continue):
Last edited by esuhl (2012-03-27 01:20:07)Thank you all for your replies :-)
hadrons123 wrote:What happens when you do try the suggestion given by it?
I don't exactly know how I should "repair manually"... I thought a filesystem check in GParted would have been enough...
lijpbasin wrote:You can boot the system using a archlinux live cd, and run fsck manually on every linux partition in the old system with options.
DON'T mount any of the filesystems before running fsck, or your data will probably be lost. If you want to check the partition information first, run fdisk -l with root privileges.
Thanks. I tried booting from an ArchBang live CD last night and ran "e2fsck -pcv" on each partition. The check completed, but the problem persists... I just tried again using "fsck" as you suggested and got the following output (but the machine still fails to boot with the same error as before):
fsck from util-linux 2.20.1
e2fsck 1.41.14 (22-Dec-2010)
usr was not cleanly unmounted, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
usr: 115811/458752 files (1.7% non-contiguous), 783161/1834496 blocks
Gcool wrote:
/dev/sdb2 is mounted. e2fsck: Cannot continue, aborting.
As mentioned already, the reason it's failing is because the /dev/sdb2 partition is mounted before it can be fsck'd. What is this partition exactly (which filesystem, what's on it, mountpoint,...)?
I'm not overly familiar with the Linux boot process, but why would it suddenly be mounting this partition before fsck-ing it? Even if it was mounted when the netbook shutdown, surely the boot process starts with all partitions unmounted...? Anyway, the partition details from /etc/fstab are below.
<file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
/dev/sda1 / ext2 defaults,noatime 0 1
/dev/sdb1 /home ext2 defaults,noatime,user_xattr 0 1
/dev/sdb2 /usr ext2 defaults,noatime 0 1
I'm (now) aware that mounting /usr as a separate partition is a bad idea and (having read the "Error when booting with the new initscripts" thread), I have told pacman to ignore updates to the initscripts package (until I figure out how best to work round or fix that issue).
Shark wrote:Write umount /dev/sdb2 in konsole or unmount partition in gparted by right click on problematic partition and click unmount. Than proced.
If I type "umount /dev/sdb2" at the prompt, I get the following error:
umount: /usr: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
I tried "umount -l /dev/sdb2" to unmount when the device becomes free... but it never does.
I also booted into GParted, but there is no option to "unmount" /dev/sdb2. There is a "mount" option in the menu, but it is greyed out. If I open a terminal window from the GParted Live environment and type "sudo umount /dev/sdb2" I get the following message:
umount: /dev/sdb2: not mounted
DSpider wrote:Are you mounting the root drive with "ro" (read only) in fstab?
No (as shown above). I don't *think* I've messed anything up with fstab or any other config files -- everything was working perfectly till the netbook shutdown whilst pacman was running. -
Shared storage check failed on nodes
hi friends,
I am installing rac 10g on vmware and os is OEL4.i completed all the prerequisites but when i run the below command
./runclufy stage -post hwos -n rac1,rac2, i am facing below error.
node connectivity check failed.
Checking shared storage accessibility...
WARNING:
Unable to determine the sharedness of /dev/sde on nodes:
rac2,rac2,rac2,rac2,rac2,rac1,rac1,rac1,rac1,rac1
Shared storage check failed on nodes "rac2,rac1"
please help me anyone ,it's urgent
Thanks,
poorna.
Edited by: 958010 on 3 Oct, 2012 9:47 PMHello,
It seems that your storage is not accessible from both the nodes. If you want you can follow these steps to configure 10g RAC on VMware.
Steps to configure Two Node 10 RAC on RHEL-4
Remark-1: H/W requirement for RAC
a) 4 Machines
1. Node1
2. Node2
3. storage
4. Grid Control
b) 2 switchs
c) 6 straight cables
Remark-2: S/W requirement for RAC
a) 10g cluserware
b) 10g database
Both must have the same version like (10.2.0.1.0)
Remark-3: RPMs requirement for RAC
a) all 10g rpms (Better to use RHEL-4 and choose everything option to install all the rpms)
b) 4 new rpms are required for installations
1. compat-gcc-7.3-2.96.128.i386.rpm
2. compat-gcc-c++-7.3-2.96.128.i386.rpm
3. compat-libstdc++-7.3-2.96.128.i386.rpm
4. compat-libstdc++-devel-7.3-2.96.128.i386.rpm
------------ Start Machine Preparation --------------------
1. Prepare 3 machines
i. node1.oracle.com
etho (192.9.201.183) - for public network
eht1 (10.0.0.1) - for private n/w
gateway (192.9.201.1)
subnet (255.255.255.0)
ii. node2.oracle.com
etho (192.9.201.187) - for public network
eht1 (10.0.0.2) - for private n/w
gateway (192.9.201.1)
subnet (255.255.255.0)
iii. openfiler.oracle.com
etho (192.9.201.182) - for public network
gateway (192.9.201.1)
subnet (255.255.255.0)
NOTE:-
-- Here eth0 of all the nodes should be connected by Public N/W using SWITCH-1
-- eth1 of all the nodes should be connected by Private N/W using SWITCH-2
2. network Configuration
#vim /etc/host
192.9.201.183 node1.oracle.com node1
192.9.201.187 node2.oracle.com node2
192.9.201.182 openfiler.oracle.com openfiler
10.0.0.1 node1-priv.oracle.com node1
10.0.0.2 node2-priv.oracle.com node2-priv
192.9.201.184 node1-vip.oracle.com node1-vip
192.9.201.188 node2-vip.oracle.com node2-vip
2. Prepare Both the nodes for installation
a. Set Kernel Parameters (/etc/sysctl.conf)
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
b. Configure /etc/security/limits.conf file
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
c. Configure /etc/pam.d/login file
session required /lib/security/pam_limits.so
d. Create user and groups on both nodes
# groupadd oinstall
# groupadd dba
# groupadd oper
# useradd -g oinstall -G dba oracle
# passwd oracle
e. Create required directories and set the ownership and permission.
# mkdir –p /u01/crs1020
# mkdir –p /u01/app/oracle/product/10.2.0/asm
# mkdir –p /u01/app/oracle/product/10.2.0/db_1
# chown –R oracle:oinstall /u01/
# chmod –R 755 /u01/
f. Set the environment variables
$ vi .bash_profile
ORACLE_BASE=/u01/app/oracle/; export ORACLE_BASE
ORA_CRS_HOME=/u01/crs1020; export ORA_CRS_HOME
#LD_ASSUME_KERNEL=2.4.19; export LD_ASSUME_KERNEL
#LANG=”en_US”; export LANG
3. storage configuration
PART-A Open-filer Set-up
Install openfiler on a machine (Leave 60GB free space on the hdd)
a) Login to root user
b) Start iSCSI target service
# service iscsi-target start
# chkconfig –level 345 iscsi-target on
PART –B Configuring Storage on openfiler
a) From any client machine open the browser and access openfiler console (446 ports).
https://192.9.201.182:446/
b) Open system tab and update the local N/W configuration for both nodes with netmask (255.255.255.255).
c) From the Volume tab click "create a new physical volume group".
d) From "block Device managemrnt" click on "(/dev/sda)" option under 'edit disk' option.
e) Under "Create a partition in /dev/sda" section create physical Volume with full size and then click on 'CREATE'.
f) Then go to the "Volume Section" on the right hand side tab and then click on "Volume groups"
g) Then under the "Create a new Volume Group" specify the name of the volume group (ex- racvgrp) and click on the check box and then click on "Add Volume Group".
h) Then go to the "Volume Section" on the right hand side tab and then click on "Add Volumes" and then specify the Volume name (ex- racvol1) and use all space and specify the "Filesytem/Volume type" as ISCSI and then click on CREATE.
i) Then go to the "Volume Section" on the right hand side tab and then click on "iSCSI Targets" and then click on ADD button to add your Target IQN.
j) then goto the 'LUN Mapping" and click on "MAP".
k) then goto the "Network ACL" and allow both node from there and click on UPDATE.
Note:- To create multiple volumes with openfiler we need to use Multipathing that is quite complex that’s why here we are going for a single volume. Edit the property of each volume and change access to allow.
f) install iscsi-initiator rpm on both nodes to acces iscsi disk
#rpm -ivh iscsi-initiator-utils-----------
g) Make entry in iscsi.conf file about openfiler on both nodes.
#vim /etc/iscsi.conf (in RHEL-4)
and in this file you will get a line "#DiscoveryAddress=192.168.1.2" remove comment and specify your storage ip address here.
OR
#vim /etc/iscsi/iscsi.conf (in RHEL-5)
and in this file you will get a line "#ins.address = 192.168.1.2" remove comment and specify your storage ip address here.
g) #service iscsi restart (on both nodes)
h) From both Nodes fire this command to access volume of openfiler-
# iscsiadm -m discovery -t sendtargets -p 192.2.201.182
i) #service iscsi restart (on both nodes)
j) #chkconfig –level 345 iscsi on (on both nodes)
k) make the partition 3 primary and 1 extended and within extended make 11 logical partition
A. Prepare partitions
1. #fdisk /dev/sdb
:e (extended)
Part No. 1
First Cylinder:
Last Cylinder:
:p
:n
:l
First Cylinder:
Last Cylinder: +1024M
2. Note the /dev/sdb* names.
3. #partprobe
4. Login as root user on node2 and run partprobe
B. On node1 login as root user and create following raw devices
# raw /dev/raw/raw5 /dev/sdb5
#raw /dev/raw/taw6 /dev/sdb6
# raw /dev/raw/raw12 /dev/sdb12
Run ls –l /dev/sdb* and ls –l /dev/raw/raw* to confirm the above
-Repeat the same thing on node2
C. On node1 as root user
# vi .etc/sysconfig/rawdevices
/dev/raw/raw5 /dev/sdb5
/dev/raw/raw6 /dev/sdb6
/dev/raw/raw7 /dev/sdb7
/dev/raw/raw8 /dev/sdb8
/dev/raw/raw9 /dev/sdb9
/dev/raw/raw10 /dev/sdb10
/dev/raw/raw11 /dev/sdb11
/dev/raw/raw12 /dev/sdb12
/dev/raw/raw13 /dev/sdb13
/dev/raw/raw14 /dev/sdb14
/dev/raw/raw15 /dev/sdb15
D. Restart the raw service (# service rawdevices restart)
#service rawdevices restart
Assigning devices:
/dev/raw/raw5 --> /dev/sdb5
/dev/raw/raw5: bound to major 8, minor 21
/dev/raw/raw6 --> /dev/sdb6
/dev/raw/raw6: bound to major 8, minor 22
/dev/raw/raw7 --> /dev/sdb7
/dev/raw/raw7: bound to major 8, minor 23
/dev/raw/raw8 --> /dev/sdb8
/dev/raw/raw8: bound to major 8, minor 24
/dev/raw/raw9 --> /dev/sdb9
/dev/raw/raw9: bound to major 8, minor 25
/dev/raw/raw10 --> /dev/sdb10
/dev/raw/raw10: bound to major 8, minor 26
/dev/raw/raw11 --> /dev/sdb11
/dev/raw/raw11: bound to major 8, minor 27
/dev/raw/raw12 --> /dev/sdb12
/dev/raw/raw12: bound to major 8, minor 28
/dev/raw/raw13 --> /dev/sdb13
/dev/raw/raw13: bound to major 8, minor 29
/dev/raw/raw14 --> /dev/sdb14
/dev/raw/raw14: bound to major 8, minor 30
/dev/raw/raw15 --> /dev/sdb15
/dev/raw/raw15: bound to major 8, minor 31
done
E. Repeat the same thing on node2 also
F. To make these partitions accessible to oracle user fire these commands from both Nodes.
# chown –R oracle:oinstall /dev/raw/raw*
# chmod –R 755 /dev/raw/raw*
F. To make these partitions accessible after restart make these entry on both nodes
# vi /etc/rc.local
Chown –R oracle:oinstall /dev/raw/raw*
Chmod –R 755 /dev/raw/raw*
4. SSH configuration (User quivalence)
On node1:- $ssh-keygen –t rsa
$ssh-keygen –t dsa
On node2:- $ssh-keygen –t rsa
$ssh-keygen –t dsa
On node1:- $cd .ssh
$cat *.pub>>node1
On node2:- $cd .ssh
$cat *.pub>>node2
On node1:- $scp node1 node2:/home/oracle/.ssh
On node2:- $scp node2 node2:/home/oracle/.ssh
On node1:- $cat node*>>authowized_keys
On node2:- $cat node*>>authowized_keys
Now test the ssh configuration from both nodes
$ vim a.sh
ssh node1 hostname
ssh node2 hostname
ssh node1-priv hostname
ssh node2-priv hostname
$ chmod +x a.sh
$./a.sh
first time you'll have to give the password then it never ask for password
5. To run cluster verifier
On node1 :-$cd /…/stage…/cluster…/cluvfy
$./runcluvfy stage –pre crsinst –n node1,node2
First time it will ask for four New RPMs but remember install these rpms by double clicking because of dependancy. So better to install these rpms in this order (rpm-3, rpm-4, rpm-1, rpm-2)
1. compat-gcc-7.3-2.96.128.i386.rpm
2. compat-gcc-c++-7.3-2.96.128.i386.rpm
3. compat-libstdc++-7.3-2.96.128.i386.rpm
4. compat-libstdc++-devel-7.3-2.96.128.i386.rpm
And again run cluvfy and check that "It should given a clean cheat" then start clusterware installation. -
HP ENVY dv6 Notebook PC and error "P2PP BurnBoot Check Failed "
Hi,
I just had a new hard drive put in to my laptop but can't get the recovery media for Windows 8 and drivers to install. It runs the 4 disks that originally came with my laptop. However, after restarting and attempting to install the media, it provides the error message "P2PP BurnBoot Check Failed." I ran tests on the hard drive and memory and both passed just fine. I read about the BIOS date but mine is already set for 2012. Any suggestions?Hi,
One other possible option you could consider is the following.
Download the OEM Windows 8 Image file on the following link - Note that this Image file is subject to a download cap, so you may need to try over a period of a few hours before the download starts successfully.
https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1
If you need a utility to create a bootable Flash Drive for this Image, try the free application below.
http://rufus.akeo.ie/
The product key for Windows 8 is encrypted in your bios chip and will be automatically read during installation.
Additional software and drivers you may require can be found by entering either your full Model No. or Product No. Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Free Goods check box in PO, for Services
Hello,
Is there any way to activate the Free goods checkbox for Services (item category 'D') in Purchase Order.
This field seems not to be available in the screen layout.
Your support is highly appreciated.
Regards,
Vijay.Hi,
Per SAP Note 0000634395, activation of Free Goods Check box for services in not possible.
Though there is an option to make the services unaccountable, by marking the service as contingency item in the service details from the services tab.
The subitem total is the aggregate of the subitem net values. This subitem total excludes subitems marked as contingency or alternate lines.
Please refer to the link provided;
http://help.sap.com/erp2005_ehp_04/helpdata/EN/8d/7638d98f3f11d2b47f006094b93006/frameset.htm
Regards,
Sekhar. -
Return Item and Free goods check box in purchase order
Hi Guru:
I just got the question regarding the return item and free goods check box,my question is that if I check the free good check box,then the price of the matieral will be charged to zero,however,if I want to issue the return purchase order to the vendor,does I need to check the return box first and then issue the return order to the vendor? Then go to MIGO transaction to select the movement type 122 to return the goods,what's the whole precedure for returning the goods to the vendor,can anybody tell me,very appriated!Hi,
Retun to vendor through have two types....
One is you have Po created, vendor send the item in that few items have rejected so you need to return the item to vendor......
here in MIGo chose returrn to vendor selce the PO numbere.... system automaticaly take the movent type 122....
sencond type is Retun PO..... In Po while creting the PO tick the return indication..
If you do the GR system will pick 161mopvent type.. ( GR returns)...
REgards
anand -
Java ME 8 Permission check failed when opening a serial port
I have a larger Jave ME8.1 application that was going well until I tried to add one last piece, reading and writing data from a serial port. This was left to last because it is trivial, at least in most programming languages. The is IDE NetBeans 8.0.2 running on a Windows 7 PC. The platform is a Raspberry Pi B or B+ (I have tried both) with the most current Raspbian (12/24/2014 I believe). To simplify the process I created a new app with just the open and close code and this generates the same error I am experiencing in the larger application. The program is as follows:
package javamecomapp;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.microedition.io.CommConnection;
import javax.microedition.io.Connector;
import javax.microedition.midlet.MIDlet;
* @author ****
public class JavaMEcomApp extends MIDlet {
static int BAUD_RATE = 38400;
static String SERIAL_DEVICE = "ttyAMA0";
static CommConnection commConnection = null;
static OutputStream os = null;
static InputStream is = null;
static String connectorString;
private int rtnValue = -1;
@Override
public void startApp() {
java.lang.System.out.println("Opening comm port.");
try {
rtnValue = JavaMEcomApp.openComm();
} catch (IOException ex) {
Logger.getLogger(JavaMEcomApp.class.getName()).log(Level.SEVERE, null, ex);
@Override
public void destroyApp(boolean unconditional) {
java.lang.System.out.println("Closing comm port.");
try {
rtnValue = JavaMEcomApp.closeComm();
} catch (IOException ex) {
Logger.getLogger(JavaMEcomApp.class.getName()).log(Level.SEVERE, null, ex);
private static int openComm()throws IOException {
java.lang.System.out.println("Opening comm port.");
connectorString = "comm:" + SERIAL_DEVICE + ";baudrate=" + BAUD_RATE;
commConnection = (CommConnection)Connector.open(connectorString);
is = commConnection.openInputStream();
os = commConnection.openOutputStream();
return 0;
private static int closeComm()throws IOException {
java.lang.System.out.println("Closing comm port.");
is.close();
os.close();
commConnection.close();
return 0;
If I comment out the JavaMEcomApp.openComm and closeComm lines it runs fine. When they are included, the following error is dumped to the Raspberry Pi terminal:
Opening comm port.
Opening comm port.
[CRITICAL] [SECURITY] iso=2:Permission check failed: javax.microedition.io.CommProtocolPermission "comm:ttyAMA0;baudrate=38400" ""
TRACE: <at java.security.AccessControlException: >, startApp threw an Exception
java.security.AccessControlException:
- com/oracle/meep/security/AccessControllerInternal.checkPermission(), bci=118
- java/security/AccessController.checkPermission(), bci=1
- com/sun/midp/io/j2me/comm/Protocol.checkForPermission(), bci=16
- com/sun/midp/io/j2me/comm/Protocol.openPrim(), bci=31
- javax/microedition/io/Connector.open(), bci=77
- javax/microedition/io/Connector.open(), bci=6
- javax/microedition/io/Connector.open(), bci=3
- javamecomapp/JavaMEcomApp.openComm(), bci=46
- javamecomapp/JavaMEcomApp.startApp(), bci=9
- javax/microedition/midlet/MIDletTunnelImpl.callStartApp(), bci=1
- com/sun/midp/midlet/MIDletPeer.startApp(), bci=5
- com/sun/midp/midlet/MIDletStateHandler.startSuite(), bci=246
- com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite(), bci=38
- com/sun/midp/main/CldcMIDletSuiteLoader.startSuite(), bci=5
- com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite(), bci=130
- com/sun/midp/main/AppIsolateMIDletSuiteLoader.main(), bci=26
java.security.AccessControlException:
- com/oracle/meep/security/AccessControllerInternal.checkPermission(), bci=118
- java/security/AccessController.checkPermission(), bci=1
- com/sun/midp/io/j2me/comm/Protocol.checkForPermission(), bci=16
- com/sun/midp/io/j2me/comm/Protocol.openPrim(), bci=31
- javax/microedition/io/Connector.open(), bci=77
- javax/microedition/io/Connector.open(), bci=6
- javax/microedition/io/Connector.open(), bci=3
- javamecomapp/JavaMEcomApp.openComm(), bci=46
- javamecomapp/JavaMEcomApp.startApp(), bci=9
- javax/microedition/midlet/MIDletTunnelImpl.callStartApp(), bci=1
- com/sun/midp/midlet/MIDletPeer.startApp(), bci=5
- com/sun/midp/midlet/MIDletStateHandler.startSuite(), bci=246
- com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite(), bci=38
- com/sun/midp/main/CldcMIDletSuiteLoader.startSuite(), bci=5
- com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite(), bci=130
- com/sun/midp/main/AppIsolateMIDletSuiteLoader.main(), bci=26
Closing comm port.
Closing comm port.
TRACE: <at java.lang.NullPointerException>, destroyApp threw an Exception
java.lang.NullPointerException
- javamecomapp/JavaMEcomApp.closeComm(), bci=11
- javamecomapp/JavaMEcomApp.destroyApp(), bci=9
- javax/microedition/midlet/MIDletTunnelImpl.callDestroyApp(), bci=2
- com/sun/midp/midlet/MIDletPeer.destroyApp(), bci=6
- com/sun/midp/midlet/MIDletStateHandler.startSuite(), bci=376
- com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite(), bci=38
- com/sun/midp/main/CldcMIDletSuiteLoader.startSuite(), bci=5
- com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite(), bci=130
- com/sun/midp/main/AppIsolateMIDletSuiteLoader.main(), bci=26
java.lang.NullPointerException
- javamecomapp/JavaMEcomApp.closeComm(), bci=11
- javamecomapp/JavaMEcomApp.destroyApp(), bci=9
- javax/microedition/midlet/MIDletTunnelImpl.callDestroyApp(), bci=2
- com/sun/midp/midlet/MIDletPeer.destroyApp(), bci=6
- com/sun/midp/midlet/MIDletStateHandler.startSuite(), bci=376
- com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite(), bci=38
- com/sun/midp/main/CldcMIDletSuiteLoader.startSuite(), bci=5
- com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite(), bci=130
com/sun/midp/main/AppIsolateMIDletSuiteLoader.main(), bci=26
I have tried this with three different serial ports, /dev/ttyAMA0 (yes I did disable the OS from using it), an arduino board /dev/ttyACM0, and a USB to RS485 adaptor /dev/ttyUSB0. All of these ports could be connected and use normally with both a C program and terminal program in the Pi. The API Permissions were set in the project properties / Application Descriptor / API Permissions to jdk.dio.DeviceMgmtPermission "/dev/ttyAMA0". This of course was changed as I tested different devices.
I found a reference suggesting adding the line "authentication.provider = com.oracle.meep.security.NullAuthenticationProvider" to the end of the jwc_properties.ini file. This had no effect. I found references that during development in eclipse and NetBeans, the app is already elevated to the top level so this should not be an issue until deployment. This does not appear to be the case.
I am out of time and need a solution quickly. Any suggestions are welcome.Terrence,
Thank you for responding and confirming the issues I'm having with static addressing. As far as the example above, I do have the standard LEDs working correctly, however, the example I'm referring to above is from the JavaME samples using the GPIO Port for the LEDS, according to the Device I/O Preconfigured List you referenced:
GPIO Ports
The following GPIO ports are preconfigured.
Devicel ID
Device Name
Mapped
Configuration
8
LEDS
PTB22
PTE26
PTB21
direction = 1 (Output only)
initValue = 0
GPIOPins:
controllerNumber = 1
pinNumber = 22
mode = 4 (Push-pull mode)
controllerNumber = 4
pinNumber = 26
mode = 4 (Push-pull mode)
controllerNumber = 1
pinNumber = 21
mode = 4 (Push-pull mode)
So is the assumption that using GPIOPort for accessing the GPIO port for Device ID 8 as listed in the Device I/O Preconfigured list not supported? -
Post install checks failed for DBC file - Oracle App11.5.10.2 Linux 5.3
Hi everybody,
I tried Installing Oracle E-Business Suite 11.5.10.2 on Red Hat Enterprise Linux Server release 5.3
The Post install checks failed for DBC file, HTTP, JSP and PHP. Apparently the DBC hadn’t been created. I had verified the log file, while executing adgendbc.sh, it throwing below error.
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi.bangalore.bedford.local_vis.dbc
DBC generation failed with exit code 127
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi_vis.dbc
DBC generation failed with exit code 127
Updating Server Security Authentication
Updating Server Security Authentication failed with exit code 127
adgendbc.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
.end err out.
Thanks in advance.
sreejithWelcome to the forums !
Pl post EBS related question in the EBS forums at http://forums.oracle.com/forums/category.jspa?categoryID=3
HTH
Srini -
System architecture check failed while adding a New Node in RAC
Hi Friends,
Environment:SUN Solris 10
Cluster Version:10.2.0.3
database Version:10.2.0.3.0
Due to H/W failure one of our RAC node(prod1) got formatted.
We have deleted the node(prod1) from RAC successfully.
But When i am again trying to add the node and checking prerequistes i am facing the below issue.
$ cd /software/oracle/product/crs/bin
$ ./cluvfy stage -pre crsinst -n prod1,prod2
Check: System architecture
Node Name Available Required Comment
prod2 unknown 64-bit failed
prod1 64-bit 64-bit passed
Result: System architecture check failed.But issue is that prod2 is my active(running node), so how to resolve this issue?
please suggest..
Regards
UmeshResolved..
Thanks...
Maybe you are looking for
-
How do i Add An Audiobook file to the Audiobook Library Folder????
I have an audiobook I've downloaded and want to put it in the folder under Library called Audiobooks so they are all together. How do I do this??? The Audiobook is currently in my music folder. Both the audiobooks and music folders are under the Libr
-
N97 v2.1 or v3.0 when will it be released?
Not that I want to appear ungrateful, but I think most of those who have managed to upgrade to v2.0 will be a little disappointed. It just isn't quite there yet, is it? Still not that responsive touch and elegant feel that I was hoping for. One min
-
I have been charged with creating ABAP Object Standards for my company. I have found naming conventions, but have not found any programming standards anywhere. Does anyone know of any that I could use? Thanks Craig
-
Hello, Over the past few days, when I use my smartphone (or computer) connected to the LAN (Verizon FiOS - Actiontec router - rev i), I am unable to get to some sites (s4gru.com or kwiksetkevo.com). The browser returns a "couldn't connect mes
-
Problem with viewing a rented movie. Whem I try playing it I get a message saying my apple tv is not authorized.