Free domain name for .mac websites.

Is there any free site that works with .mac's personal domain feature. I have one through microsoft office live (free) but cannot seem to find out how to do it through that. Any information?

http://www.ulimit.com/en/vdns.php
http://www.dot.tk/en/pageA00.html
But these are only redirects (with cloaking maybe). They aren't CNAME. I don't think there is any free domain name who does CNAME.
Regards,
Cédric

Similar Messages

Netbios/Partial Qualified Domain name for Mac?

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

IWeb domain name for new website?

Hello!
I am new to iWeb and have created a website and now have questions about publishing it. The site I am creating is a replacement for an existing website that I did not make. I want the domain name to be the same as the existing site (cscfarm.com) and just to replace the old one with mine. Now, I would rather not join mobile me because I don't want the confusing url name and I already have permission to use cscfarm.com. My question is, do I have to get the FTP address from the person that currently runs the website? And if so, since I am using iWeb '08, how/where do I enter the FTP address to publish the website? I know that if I had '09 or higher I could do it through iWeb but I believe '08 is different. Am I going to need professional help for this or should I just get iLife '11 OR is it really not as hard as it seems? Any help/suggestions is appreciated!! Thanks so much!

Hi There,
BC does NOT host your domain.
You will need to keep it with your current Domain Registra or transfer it to another domain registra if you wish to close your account with Weebly. This has nothing to do with BC.
The EPP code is just a means to veritfy ownership of the domain and ensure such a transfer is approved by the owner of the domain.
In terms of BC all you do in the domain manager is to point all traffic or just web traffic to BC depending on your requirements/use of email etc.

How to configure internet domain name for P6 website using weblogic

After installing and configuring weblogic for P6 you get the following address https://servername:7002/console/login/LoginForm.jsp to access P6 website. Anyone know how to configure a purchase domain such as www.mydomain.com have it redirect to https://servername:7002/console/login/LoginForm.jsp Is this configured in weblogic server? If not, what is needed to redirect the purchased domain?

HI
You could have that domain resolving to/by some DNS servers and set up a load balancer / proxy to redirect every incoming request to that domain / site to your weblogic console.
however , what is it you are trying to do? It is very unsual of redirecting/ using Domain names to redirect to wls consoles.
could you explain your use case in detail please
Sri

100 % free domain name and 2000 mb linux hosting for one year

As I said for the first time I didn’t believe I thought
it was one those internet scams
But here im having two domain names and one year of web
hosting 2000 mb 50000 mb
bandwidth linux hosing . 100% didn’t pay anything just
ask an American friend to answer few
savories for me ,When she have a free time , cause the offer
is limited just for US resident .
And u know always there are a backdoor just ask any American
friend ( if u are not ) to answer
those savories for u And here u are u got a domain name
registered in ur name for one yeah and
after that year u will be warned to answer few more savories
if u wanna keep the domain
name and the web hosting for another year .
its easy free and real cause im starting my own online
business with that web hosting and domain
name and with the highest quality DNS for the domain name and
a full feature control panel CP
as for the web hosting , u can make sure that by ur self
right now just visit those link register
and start answering the savories to get ur own web hosting
and domain name .
free web hosting and domain name :
http://www.dietzel.com/partner/idevaffiliate.php?id=393_7
Free domain name :
http://www.dietzel.com/partner/idevaffiliate.php?id=393_6
Free domain name :
http://www.dietzel.com/partner/idevaffiliate.php?id=393_5
And this is the website im running right now , using the
domain name and web hosting I have got for free :
http://bc-classifieds.net/
and
http://valhallarealm.com

As I said for the first time I didn’t believe I thought
it was one those internet scams
But here im having two domain names and one year of web
hosting 2000 mb 50000 mb
bandwidth linux hosing . 100% didn’t pay anything just
ask an American friend to answer few
savories for me ,When she have a free time , cause the offer
is limited just for US resident .
And u know always there are a backdoor just ask any American
friend ( if u are not ) to answer
those savories for u And here u are u got a domain name
registered in ur name for one yeah and
after that year u will be warned to answer few more savories
if u wanna keep the domain
name and the web hosting for another year .
its easy free and real cause im starting my own online
business with that web hosting and domain
name and with the highest quality DNS for the domain name and
a full feature control panel CP
as for the web hosting , u can make sure that by ur self
right now just visit those link register
and start answering the savories to get ur own web hosting
and domain name .
free web hosting and domain name :
http://www.dietzel.com/partner/idevaffiliate.php?id=393_7
Free domain name :
http://www.dietzel.com/partner/idevaffiliate.php?id=393_6
Free domain name :
http://www.dietzel.com/partner/idevaffiliate.php?id=393_5
And this is the website im running right now , using the
domain name and web hosting I have got for free :
http://bc-classifieds.net/
and
http://valhallarealm.com

How to set Netbios/Partial Qualified Domain name for a Mac?

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

You're looking for something completely different if
what you're after is to have your DHCP server (your
router) report your computer name.
yep - that's what I'm looking for but everything else didn't pan out so I'm following up the suggestion of our IT guy (which is that it reports the Netbios name).
I don't know what brand or model of router you're
using but with a Linksys brand router it reports the
yep - I've got a Linksys, about 2 years old (802.11b).
computer name, which is set on your Mac under Apple
menu --> System Preferences... --> Sharing. The
Linksys router will report the computer name
typically found under Status --> Local Network -->
DHCP Clients Table.
nope - I've got it set as "Michael Levin Laptop", but the Linksys router shows it (and all of the other Macs on the network) as "¸#Ð„ª"... Any way to debug this?
What you'll notice is that none of this has anything
to do with Windows. Today's basic networking is
platform agnostic.
I thought so; it was a desperation move, based on my IT person's suggestion...
Thanks,
Mike

Netbios/Partial Qualified Domain name for a Mac?

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

that did not work - I have a name entered in the
Sharing preference menu, and it does not show up.
Did you try setting the "DHCP Client ID" in the Network pane of System Preferences?
Even doing this may not work though... I know I had trouble getting a host name to show up correctly at my work. The DHCP server had picked up the previous name of my system and there didn't seem to be anything I could do from the client side to get it changed. The old system name was associated with my machines MAC address in the DHCP server and nothing I did from the client seemed to allow me to refresh the name the server had already latched onto. The network guys eventually had to delete the entry for my system off of the DHCP server and then allow my system to request a new IP address and refresh it's entry in the server. I have no idea how you might do something like this on a LinkSys router. I suppose the DHCP servers that run on these little personal routers are pretty rudimentary. I guess you might try doing some sort of reset on the router to see if it would reload client names. Or if you have your router configred to only allow connections from specific MAC addresses you might try deleting the entry for your Mac and then adding it back to see if that would trigger it to pick up a new client name.
sorry; I started a new thread because my question
is now much more focused. Someone told me the
Linksys router gets that info from the netbios name,
so I figured I should ask that specific question
with that specific subject title - maybe someone
knows how to specify this netbios name for a Mac,
but might not know or care anything about routers
and my specific problem.
It seems understandable that PCs would send their NetBIOS names to a DHCP server... but it seems to me that a Mac would send it's "sharing" name. I doubt that a LinkSys router would specifically request a NetBIOS name, but I don't really know... I don't have any experience with them. I suppose you could try turning on "Window Sharing" in system preferences to see it that made you Mac look more like a Windows box to the router. :^\
Steve

Question about domain name and .mac

my wife and i are going to move to London and we want a website to update people. now it would be a lot easier to say, "oh, just go to www.domainx.com". (with domainx being whatever domain we buy) rather than saying, "oh go to mac.homepage.iweb.ilife.joseph.page1.com" or whatever massive name they choose. now i would like to publish to .mac because of what they allow you to do. is there anyway i could buy domainx.com and when they go to domainx.com it will send them to my .mac published site. i hope you understand the question. i don't want to be limited by domainx.com but i want the luxury of that short domain name. any help would be amazing. thanks so much!
~joseph

1. Search this forum. It's discussed every minute. The topic is also above yours. Please have a look.
[Publishing to .mac - how many domains can i have?|http://discussions.apple.com/thread.jspa?threadID=1487530&tstart=0]
2. iWeb publishes to web.mac.com/yourdotMacId.
So there really is not much to remember.
3. Go to the dotMac Help. It's explained there.
1. [Setting up .Mac to use a personal domain name|http://help.apple.com/mac2/1/help/member/pgs/gen367.html]
You can set up your .Mac account to use a personal domain name by registering the...
2. [About .Mac and personal domain names|http://help.apple.com/mac2/1/help/member/pgs/gen366.html]
Learn how you can use your own personal domain name for your iWeb '08 websites....
3. [If you're having trouble setting up your personal domain name on .Mac|http://help.apple.com/mac2/1/help/member/pgs/gen369.html]
Make sure you've registered your domain with an accredited domain name registrar and linked the domain...

Where can I find free Christmas stationery for Mac Mail version 6.2?

Where can I find free Christmas stationery for Mac Mail version 6.2 on my MacBook Pro running OS 10.8.2??? Everything I've tried to download is from 2008-2009 and isn't compatible.
~Patty

Dear sig,
Thank you for responding. When I Googled, I received a list of suggested web sites, but they were all posted in 2008-2009 and, when I downloaded the application, they were not compatible with OS 10.8.2 and/or Mail 6.2. I did find an app in the App Store called "Stationery for Mail" for $6.99 (less expensive than equinux or ipresentee) that had one Christmas email template and several others for other occasions/seasons. I purchased that one so that I'd have at least one email template to use for now, but I'd love to find more templates for future use that are FREE.
I can't believe Apple hasn't created more email stationery templates for download (freeware) on its web site. I can find screensavers and wallpapers, but nothing for Mail.
If you or anyone else finds or knows of a website with FREE email stationery templates for Mail 6.2, please let me know.
Thank you!
~Patty

Link domain name to .mac server

How do you link your own domain name to .mac server? please advice, thanks
SIlver G4 Mac OS X (10.4.6)

Hi
This is something that is done by your domain name host, so login to their site.
Search for domain name forwarding, or domain forwarding.
Here you enter the address that you wish to forward to.
The short address for an iWeb page on .mac is:
http://web.mac.com/YourUserName
If you have more than one site and wish to forward to a specific one, then you can use:
http://web.mac.com/YourUserName/iWeb/SiteName <<-- Make sure the W in iWeb is a capital.
Will<br>
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.6) Getting Started with iWeb - Tips here

How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.

I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein

How to change the name / IP address and domain name for BOE Server

Hello,
We want to change the name / IP address and domain name for BOE Server, please could you indicate the steps or procedure to follow?
I need your help
thank you

If it's 3.1 just change them, shouldn't cause any issues if by domain name you are referring to changing the domain the computer belongs to. If you are changing your domain for AD authentication then you will may have to take quite a few steps if the old domain is going away. Let us know.
Regards,
Tim

Free wmv converter for mac???

does anyone know a free wmv converter for mac? I tried MPEG streamclip and wmv is the only format it won't convert the whole file for, it only does 10 secs and from what I know this isn't a demo.

Try this site for a free conversion; media-convert.
Post back if you have success with it...I never used it...have F4M, which is worth it if you intend to do conversion often.

How to change IP, Hostname and domain name for Oracle Application R12

Hi,
I'm new to Oracle, we used to have one production and one test server for Oracle Application R12, but the test server was corrupted, so we decided to clone production server and create a new test server, after cloning and creation of test server, how should we do to change IP address, hostname and domain name for test server?
Our production and test server environment is:
Linux Enterprise AS 2.6.9
Application module: E-Business Suite Treasury only
Your advice will be much appreciated.
Regards,
Kenneth
Edited by: 850209 on Apr 7, 2011 5:37 PM

850209 wrote:
Hi,
There are few tnsnames.ora and listener.ora files in the system, how to know which one are effective? If I change tnsnames.ora hostname entry, do I need to change listerner.ora file also?
Thanks.
Regard,
Kenneth.tnsnames.ora is used only by client processes. listner.ora is used only to configure the listener, and that is a server side issue only. In addition, the listener can start without any listener.ora at all, using all default values. See my discussion of tns issues at edstevensdba.wordpress.com
If you are using dbcontrol, you will most likely need to reconfigure it, using the emca utility.

DNS Domain Name for SAP System

Hi,
I am installing BI7.1 , it is asking for DNS Domain Name for SAP System.
What to give i dont know please some one help
Thanks,
Jack

Hi,
Pls chk this link;
http://en.wikipedia.org/wiki/Domain_name_system
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
Regards
CSM Reddy

Free domain name for .mac websites.

Similar Messages

Maybe you are looking for