Free Goods for material combination

Hi,
   I have a scenario for free goods determination.If customer orders a total of 10 units of (material A + Material B), 1 unit of material B is given free. As i understand this is not supported in the standard free goods functionality, is there a workaround? Can we create a new BOM material with Material A and Material B as the components, and in the free goods determination, we set it as 10 units of new material will give 1 unit material B free?
min

HI,
If you know for how many material B, you are going to give 1 material B free.
suppose, out of 10 items, if customer orders 5 Material A and 5 Material B, then you can give 1 material B free.
so depending on your requirement you can define the free goods based on material B(like minimum number of materail B in the order).
Hope this helps.
Thanks,
Srini.

Similar Messages

  • Multiple free goods for one main material

    Hello SAP Gurus,
    we have a business requirement that to issue multiple free products for one main product, if the upliftment is beyond the specified quantity.
    Using free goods functionality, is it possible to achive the above requirement.
    e.g                                                     Quantity
    main product        123456                         10
    free goods             xxxxx                           2
    free goods             yyyyy                           1
    is it possible to maintain such data thru free goods or any development needs to be done.
    regards
    Casimer

    Constraints in free goods in R3 taken from SAP library
    Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
    Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
    Free goods are only supported for sales orders with document category C (for example, not quotations).
    Free goods are not supported for deliveries without reference to a sales order.
    Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
    If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
    This answers your qn Not possible in R3
    If you are on Retail scenario this is possible thro bonus buy schemes
    But a lot of customizations needs to be done and you need a retail server to do that
    Regards
    Raja

  • How to have more than one free good for a material ?

    Hi everyone,
    we have this requirement from the user where he wants give more than one free good for a material.
    As far as i know we can configure only one free good for a material in standard SAP.
    if have any idea about how to achieve this please guide me how to configure the same in SAP.
    thank you in advance

    Hi
    Check my two links where I have explained this.
    Free goods using Sale order BOM methodology
    Different business scenarios and Sales BOM techniques for header and item level stock and prices
    Thank$

  • Free good for bom material

    hai i am new to sap , can any one tell me how to post free good for bom material !!

    Hi,
    Being a new member, one quick advice would be to search SDN and related forums before posting a new question, since this issue has been discussed many times.
    To answer your question, Free Goods does not support BOM.
    Please check [here|http://help.sap.com/saphelp_46c/helpdata/en/dd/55fa34545a11d1a7020000e829fd11/frameset.htm] for detailed explanation.
    Regards,
    Amit

  • Free goods for SO

    Hi,
    We have free goods which are delivered to the customers if they purchases 1 business kit get 2 different goods with each.
    Exp: purchase
    1 qty business kit
    1 qty product A (FREE)
    1 qty product B (FREE)
    I understand that this free good set in VBN1. Beside that what else settings needed in order to populate automatically in SO the moment I created line item & qty for product business kit in SO. And this free goods should populate automatically in outbound delivery (VL01N). TQ

    Hi
    Constraints of Free goods in R3
    Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
    Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
    Free goods are only supported for sales orders with document category C (for example, not quotations).
    Free goods are not supported for deliveries without reference to a sales order.
    Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
    If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
    These are Taken from SAP library and answers your query
    But With IS Retail bouns buy schemes this is possible
    Regards
    Raja
    Edited by: ramanathan raja on Aug 7, 2009 12:31 PM

  • Multiple free goods for one item in standalone CRM

    Hi Gurus,
    We are trying to implement multiple free goods for one item in standalone CRM.
    As per SAP.help.com, it says that we can configure multiple free goods scenario in standalone CRM system.
    We tried to set up this in our system.  Basically we want to implement the scenario, where a user wants to  purchase item A, he should get a prompt for choosing between two free goods  B and C.
    We did the relevant IMG settings required for Free goods at  IMG ->CRM -> Basic Functions -> Free Goods.-> Set up Free Goods
    We also did the relevant item category determination where we have made an entry with
    Item Usage = " Free Goods" , Main item cat. = "TAN' , Item Category = "TANN".
    Now we went to create condition records in the path  "SAP Menu -> Master Data -> Prices and Conditions -> SAPCND/GCM - Maintain condition"
    We chose Application ="PRT", MaintenanceGrp="PRT_FGOODS", Maintenance context ="GCM"
    Then while creating conditon records , when I try to create two condition records where the Main Product is same but free good product is different, the system is not allowing to save these two condition records.
    it is giving error "Overlapping validity periods for two condition records".
    Please advice, if i am missing something. Thanks in advance for your help.
    thanks,
    Randhir
    Edited by: Randhir Soni on Feb 8, 2010 8:12 AM

    Constraints in free goods in R3 taken from SAP library
    Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
    Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
    Free goods are only supported for sales orders with document category C (for example, not quotations).
    Free goods are not supported for deliveries without reference to a sales order.
    Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
    If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
    This answers your qn Not possible in R3
    If you are on Retail scenario this is possible thro bonus buy schemes
    But a lot of customizations needs to be done and you need a retail server to do that
    Regards
    Raja

  • Free Good for Quotation

    Plz. explain the procedure to configure Free Goods for Quatation

    Constraints in  Free goods in R3
    Free goods are only supported for sales orders with document category C (for example, not quotations).Free goods are not supported for deliveries without reference to a sales order.
    Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
    If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix
    Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
    Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
    Regards
    Raja.

  • Free Goods for Materials from the same division

    Hi Friends,
    We are trying to configure free goods based on customer and division in our system. If a customer orders any material belonging to a specific division, he is entitled for a free good.
    For this we created a new condition table based on customer and division and maintained condition records that if he orders 100 qty of any material in Division 10 that he is entitled for 1 qty of material X.
    Now the problem is that at the time of creating the sales order if Material A is entered for qty 50 and Material B is for qty 50 then the system does not give free goods. However, if we enter Materail A for 100 qty it gives the free goods 1 qty of Material X. Similarly, for Mat B with 100 qty it gives Mat X as free goods.
    The system is not adding up the quantities for the multiple line items to calculate the free goods.
    Is there any way by which we can achieve this.
    Regards,
    Abhishek

    Hi,
    So far me too have configured and getting free goods for one material. for your requirement, i think you have to tell your Abaper to do corresponding Enhancement.
    Thanks
    Ashok

  • Free goods with material type = ROH

    Hello,
    i would like to give free-goods for a particular finished goods sales.
    the free-goods' material type is equal to ROH.
    when i maintain the free goods from VBN1, system tells me that "xxx Material  is not defined for sales org xxxx with dist. channel xxx".
    the pb is for material type ROH, i can't select sales view,
    is there any work around except
      1. changing material type
      2. customizing and add view for ROH
    Thanks

    hi,
    You have to extend the ROH material to the sales area of fineshed products
    Goto to mm01 & extended teh material
    then try with VBN1
    regards,
    Arun prasad

  • Free Goods for sales order

    There are two sales order type standard(A) and promotion(C) defined in our business.
    when we create standard order it will goods automatically capture the free goods we maintaind.
    However for promotion order, the system shows below message:
    Free goods could not be determined for item 000001
    Document category is not from sales order category (VBTYP <> 'C')
    whether it is unable to use free goods for order type "C"?
    Please advice,
    Many thanks,
    Yang

    Dear Yadav
    There are two order type ZAA1 - standard  ZAA2 - promotion
              two item cateogry ZDC0 - standard  ZDC1 - free of charge.
    I made a test to change the item category assignment as ZAA1 with ZDC1 and ZAA2 with ZDC0.
    Still the free goods can automatically captured with standard order but promotion failed.
    So I think the difinition of item category is no problem and it may related to sales order type.
    My colleague told me it is unable to use free goods for the sales order which SD document category is not "C".
    I try to change the SD document categ from I to C for promotion order and the free goods appear.
    So the result is if i define the SD document category as I that I can't use function of free goods?
    Please advice
    Many thanks,
    Yang
    Edited by: Jun Yang on Nov 26, 2009 9:34 AM

  • Free Goods for QT order Types

    Can I use automatic Free goods determination for QT order types.
    however i am using it for OR right now and i have done the related configuration for QT as well but system is not detmining Free Goods for QT order types.
    I have also maintained the below entry in "Determine Item Category for Free Goods Item"
    Sa Type   ItCGr         Usg.     HLevelItCa  DfltC
    QT            NORM      FREE     AGN           AGNN

    Hi
    Std SAP itself doesnt support Free Goods at quotation level
    Standard SAP supports Free Goods at quotation level and hence the item categories AFNN and AGNN are provided in the standard SAP. But,  the Automatic determination of Free Goods is not possible for SD documents under category other than 'C'.
    In your scenario...since the automatic determination is not possible, think about handling the functionality manually or through user exits.
    Thanks,
    Ravi

  • Finding free goods for Quotation

    Hi Experts,
    I have requirement to determine free goods for perticuler product when you enter in quotation line item
    We hv standard sap option for sales order that will determine free goods in sales order.
    Can we do the same for quotation if so how can I achive this?
    Thanks
    Anish

    Hi
    Std SAP itself doesnt support Free Goods at quotation level
    Standard SAP supports Free Goods at quotation level and hence the item categories AFNN and AGNN are provided in the standard SAP. But,  the Automatic determination of Free Goods is not possible for SD documents under category other than 'C'.
    In your scenario...since the automatic determination is not possible, think about handling the functionality manually or through user exits.
    Thanks,
    Ravi

  • Free good for a month

    Hi Gurus,
    Is it possible to give free goods for a period of one month to all customers?? then how?
    thanks for replying..
    harish

    Below is the link I think fill help and fulfill ur need.
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/5a/7a593bd0714b58e10000000a11402f/frameset.htm
    Here u can configure freegoods with and without pricing
    Reward points if helpful.

  • Free Goods for multiple line items of the same material

    Hi Friends,
    We have configured Free Goods to a particular material in such a way that if the customer orders 100 qty of Material A then he gets 10 qty of Material B free. This is working fine if there is only one line item of Material A with qty more than 100.
    However, if the order is created in such a way that there are two line items of material A for 50 qty each then the system is not giving the free material B, even though the total ordered qty in the sales order for material A is 100.
    How can this be configured in the system? Please Help.
    Regards,
    Abhishek

    What is the purpose of giving the same material as second line item.
    specify in the first line item itself.
    or els the condition record which you have specified that for 100 material of A gives 10 material of B modify it to 10 of A should give 1 material of B
    The first you will be useful for you.

  • Free goods with material determination

    Hi All,
    I have i query that for line item A material i need to give free good as X material. But there is the material determination to that particular material X with the material Y.
    In this case how the system will redetermine? As of my knowledge as per the SAP standard free goods doesn't entertain any other like BOM, and variant config.
    Please let me know the answer please!
    Regards
    RPS

    You can use transaction VBN1 for assigning free goods.
    Select discount type as ZFRG.
    Select appropriate key combination.
    You can restrict the free goods validity using Valid on - Valid To option.
    Reward points if answer is useful.
    Regards,
    Pallavi.

Maybe you are looking for

  • Where do I put in the iframe link and how?

    Where do I put in the iframe link and how? Thank you.

  • Source Attachment Settings in Flash Builder

    Hello everyone, I am facing an issue with debugging. I don't want to step through the framework code in the debug mode. To avoid that, I removed the Source attachments, by selecting that node in the tree and clicking on remove. But it doesn't save th

  • How can I see playlist artwork?

    How can I see playlist artwork? I know cover flow is gone (stupid decision) but can I see the small album covers at the side like you used to be able to?

  • Director 11.5 et Windows 7-32 bits

    Bonjour J'ai réalisé un cd-rom de formation en 2004 avec Director MX 2004. Chaque année, cette formation est mise à jour. Au mois de décembre 2012, je vais avoir une commande pour la mise à jour annuelle. Le problème est que dés la semaine prochaine,

  • Will update from Tiger affect Automatic Software Update?

    Hi guys. It's my first question here. I purchased a MacBook approx 3 years ago from Apple Store which got Tiger(10.4.11) installed. I would like to update to Snow Leopard because I need to upgrade from Adobe CS3 to CS5. My question is if I buy the Sn