Free goods in delivery proble
Hi sap guru's
here is one delivery issue---
in sales order we determined under grouping for free goods determination problem is---
free goods are appearing in sales order but not displaying in delivery type
all other materials are displaying except free goods
plz give the solution issue is very urgent
Hi raju
As the free goods have TANN item category , in delivery picking wont happen for free goods.
But if your requirement is it should appear in delivery then for item category TANN in 0vlp , check the box , item relavent for picking. .
and then you can do delivery for free goods
But if you change the standard item category TANN it will affect the other standard process also. So it is advisable not to corrupt change the standard item category
Regards
Srinath
Similar Messages
-
Free goods with delivery charges
Hi,
My main vendor supplying a material for free of charge, but there is transportation charge need to be paid to transport vendor. How to handle this scenario.
I have entered the freight charge at header, but system considering the total freight value as Zero, and not possible to do Invoice verification, Please advice how to handle such scenario?
Regards,
SattujHi,
Alternately, a service PO followed by SES can be created for the freight and LIV can be done.
or
Certify the bill manually and FI can pass the same thro' FB60.
Regards,
Siva -
Free goods determined in Delivery over Order Quantity in Sales Order Item
Hi Gurus,
I've a problem about using free goods determination.
First I created free goods master record with following information
ZG1010012060075 From 100 PC -> Free good ZG1040012060075 2 PC
Free goods Category = '2' (Exclusive)
Free goods delivery control = 'E' (Delivery proportional to quantity in main item)
Then I've created Sales Order with
Item 10 ZG1010012060075 4,000 PC.
Item 11 ZG1040012060075(Free good) has been automatically determined for 80 PC
Then I've splitted Item 10 into 4 deliveries. The result of free goods determine in each delivery are as follow:
Delivery#1)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#2)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#3)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#4)
Item10 ZG1010012060075 = 472 PC
item20 ZG1040012060075 = 9 PC
*Remark : Total quantity of 'ZG1040012060075'(free goods) = 92424+24 = 81 PC
(Greater than 80 PC)*
I think the system determined free goods in Delivery#4 correctly due to rounding up. But It might not be over the order quantity in Sales Order Item 11. Even though I've set the item category in delivery with Check overdelivery = 'B' (Situation rejected with an error message), the free goods are determined over order qty. BUT if I change delivery qty in delivery#4 Item20 from 9 PC -> 8 PC -> 9 PC, the error message occurred.
My point is to fix the system not determine free goods in delivery items over order quantity in sales order item.
Has anyone met this situation before? Do you have any idea about this issue?
Best Regards,
Prachya LalitnorasateDear Sai,
Thank you for your advice, but it didn't solve my problem.
I would like the system to determine free goods with proportional to main item AND In the last delivery main item delivered completely free goods must be determined equal to remaining open delivery item.
Do you have any idea about configuration/customization? -
Hello All
I am working on SD module
I have a problem that I created a sales order that for every 100 pc 2 free pc will be given then I created the delivery order for 50 pc only but the system puts 2 free pc I tried again to change the delivery quantity to 10 pc but the system did not change the free goods quantity although when creating the free goods condition record I put Free goods delivery control u201CEu201D
Regards
Jacopo FrançoiseHi
In your condition record VBN1
minimum qty 50
from 50
unit ea
are free goods 1
add ea
calculation type 1 pro rata
free goods exclusive
delivery indicator E
Maintain this combination for your material
when you create sales order for 100 two will be free
when you change this order qty in delivery to 50 free goods will become 1 unit
I tried this and got this correctly
Pls reply whether you have got it right
Regards
raja -
Free goods when material out of stock
Dear Guru's,
I have scenario wherein my order is e.g. 100 10 (excusive) and the stock is only 60.User want to create the order for 100 10 only and in dekivery he want to send the stock for available material. System is allowing to send the stock for 60 units and showing rest 50 with the next date as per In house production time and GR processing time as per material master.and no considering the free goods in delivery.
But the user want that system should consider the proportionate free goods in delivery itself e.g 54+ 6.
Pl suggest how can i handle this issue?
Regards,
SantoshDear Santosh,
There is a Free goods delivery control available in the condition table. This indicator determines whether free goods are to be delivered alone or in conjunction with the main item.
The following options are available
(Blank) Delivery takes place regardless of main item
A Delivery only if main item is partially delivered
B Delivery only if main item is fully delivered
C Delivery if main item is part. delivered, only with main itm
E Delivery proportional to quantity in main item
The delivery control "E" would be suitable to your requirements.
Regards,
Muazzam -
Stock validation of main position in Free Goods Determination
Good afternoon,
We are using Free Goods determination, but we are having a problem when there is no available stock in the main position, SAP is determining quantities of Free Goods; what we want is customize in SPRO to obligate that only we can generate Free Goods if there is enough stock in the main position.
Thanks.Hello,
This can be controlled effectively in delivery. There is a filed
free goods delivery control in free goods determination which controls the free goods in delivery.
The rules which can be maintiaed are:
Blank : Independently of the main item
Free goods are processed fully independently.
A : only if the main item has been partially delivered The free goods are delivered only if at least part of the required sales material will, or has already been, delivered.
B : Only if the main item is partially delivered and the free goods are contained in the same delivery.
Free goods are only delivered if at least part of the material sold is delivered or has already been delivered and if the material sold is in the current delivery.
C: only if the main item has been partially delivered, only with main item.
The free goods are delivered only if at least part of the required sales material will, or has already been, delivered.
D: as a proportion to quantity the main item
The free goods are supplied as a proportionate quantity in relation to the delivered quantity of the order item.
But I don't think it is possible to have a control in the sales order to make availability of free goods depends on the maint item. But you can try with delivery group also.
Prase -
Delivery of Free Goods...
Hi Team,
Free Goods in Inclusive category has been configured and with a minimum quantity of 100 being placed ,1 free good for every 10 Pieces is triggered.
Therefore now as the customer placed an order for 200 Qty and he recieves 20 goods as free of charge and he pays for remaining 180. The sales transaction is executing all well.
Well , my doubt lies in creation of the delivery document for this order. The delivery quantity shows 180 items while customer has placed the order for 200 .
All 200 goods are confirmed in the sales order ..But the Delivey document has the delivery qty as 180 so how will the rest 20 be delivered..
Please help me in this.
Thanks.
SumanHi Suman,
that was for ur understanding.
As the free goods have TANN item category , in delivery picking wont happen for free goods.
But if your requirement is it should appear in delivery then for item category TANN in 0vlp , check the box , item relavent for picking. .
and then you can do delivery for free goods
But if you change the standard item category TANN it will affect the other standard process also. So it is advisable not to corrupt change the standard item category
Hope this will help.
thanks,
Raja -
Free goods determination & Free of charge Delivery
Hello Gurus,
Actually I have couple of queries regarding free goods.
1) Can we manitain free goods for BOM
Business Scenario - I have created a BOM "ABC" at Main item level (ERLA) with components B, C and want to give 2 different Items X, Y as free goods other that sub components. So is it possible to assign TANN itm catg with TAQ, will it work ? what will happen with taxes for free goods?
Tool Kit, ABC----(TAQ)
B -
(TAE)
C-----(TAE)
X------(TANN)
Y------(TANN)
if not possible what will be solution to map the above scenario ?
2) How to maintain the Free of charge pricing procedure?
I maen what condition types should we maintain into the free of charge pricing procedure control data (V/08)? If there is a standard pri pro for Free of charge delivery plzz Suggest to me.Hi,
1. Application of Free Goods in BOM is not posible. Moreover Free goods attract zero value only the material document is updated.
I can suggest you to use the process "Rebate of a Kind" where in you can manually enter the subproducts as free goods only thing is you will have to mention main item lineno in the higherlevel item categor of the sales order.
Though i tried long back the requirement you need, it will not work the best way is to give manually in SO.
2. Free sample maintain seperate process i.e, Document Type, item category Pricin Procedure.
For Configuration please check Img -->SD --> BF --> Free Goods --> Condition Technique free goods
-- Better you maintain "C" Document type while doing determination.
Regards
Sathya -
Dear SAP Guru,
I need some advice how to do the following scenario.
In My Purchase Order there will be 2 material A dan B. And B is a free goods (no invoice receipt).
And in this Purchase Order there will be added some type of Delivery Cost.
How can I make this Delivery Cost to be distributed propotional to material A and B since in line item B no condition type are allowed to be added.
Please help.
Thanks in Advanced
Best Regards,
SugihartoHi ,
free goods Delivery charge
If it is imported free goods..please go through the following link
PO for goods free of charge
Regards,
Nani. -
Free of charge delivery and free goods
hello,
I need clarification on the following.
There are two different things. one is free of charge delivery and the other is free goods.
1) for free of charge delivery, order type is FD , I think we have to maintain TANN(with pricing as B,100% discount). This will trigger R100 as 100% discount condition in pricing procedure. Am i right ?
2) The other is Free goods determination(OR order type). where free goods condition records are maintained and gets determined in sales order. for this scenario, TAN and TANN (100% disc) is maintained in item caterory determination. I think in this case NRAB is required and not R100 in pricing ? am i right ? ..
regdsHi,
Free of charge delivery -
Free of charge delivery is used mostly when you provide samples to customer
http://help.sap.com/SCENARIOS_BUS2004/helpdata/EN/31/923341431ef723e10000000a155106/content.htm
Free goods -
It is mostly used when you are providing something free when customer purchase of one Item/material
http://help.sap.com/SCENARIOS_BUS2007/helpdata/EN/b7/4a893a8729337be10000000a11402f/content.htm
Kapil -
Problem with posting free goods delivery
I need some help,
when I'm posting the goods issue in VL02N I'm receiving following error:
<i>Item Material Description Delivery qty UoM Batch
000001 XAK 256 N50 CB P35 CN UR V35/ AUTOALARM DOG 50 1 ST
E KO 014
Order 2000574 cannot carry revenues</i>
First I don't know why the order no is 2000574 when the delivery was done to order 2065030645, but it's not a problem to me, the problem is why I'm getting the error 'the order cannot carry revenues' because the delivery is made to an free goods order and the order has values of 0 in pricing conditions.
Looking forward to reciving some help
regards,
MartinHi Marcin
Check the following:
Free Goods
Also referred as discount in kind. Business can consider to offer discount not in monetary terms but in the form of free goods, ie goods provided without any charge when a particular quantity of material is purchased by the Customer. SAP provides two methods:
a) Inclusive
b) Exclusive
IMGSDBasic functionsFree Goods
Condition technique for free goods
Select maintain Pricing procedure
Standard procedure
Copy as ur Pricing procedure
Copy all
Save
The Pricing procedure contains the Condition Type as NA00free goods
NA00 has the Access sequence as NA00
Select activate free goods determination
Assign the procedure to sales areas using document procedure and customer procedure
Select your sales area and assign
S002 SB SX A 1 ZA0001
Save
A= Document Procedure (determined based on doc)
1= Customer procedure (Determined from customer master)
We have to maintain free goods condition records
SAP menuLogisticsSDMaster dataConditionsFree GoodsVBN1 Create
Discount type: NA00
Continue
Enter sales org, distribution channel and Customer
By default the entry screen is for Inclusive, Select Exclusive button to maintain Condition Record for Exclusive
Inclusive: Continue, as it is to maintain the record
Material: Product ID
Min Qty: Minimum qty required to be ordered (10)
From: From how many units free goods are considered ie 10
Unit=Unit of measurement of ordered product
Are free Goods: quantity free
Add= The unit of measurement of free goods item
Calculation: 1 Prorata
save
What is the other requirement?
The pricing procedure should contain the Condition type R100 that is free goods condition type. This condition type in the Procedure has requirement as 55
(55 means only if the item is free goods then only value of R100 to be used in the calculation. Value= controlled by Alt condition base value 28 which states that discount should be 100%)
Check whether your pricing procedure is created from scratch then you have to maintain the Condition type R100, requirement as 55 and altcbv= 28
If you have copied from RVAA01 there is no need to maintain R100, as it is already available
Create the order
Ordered qty is split into two items
M1 30 Pcs
This will be split as
M1 27---Item cat TANregular pricing
M1 3Item cat as TANN eligible for 100% disc
How the item category is determined
Main item:
Z1OR + NORM+TAN
Sub item
Z1ORNORM Usage= Free + Higher level item cat as TAN= TANN as sub item Item category
Exclusive
VBN1
Select Exclusive
The screen fields are same as inclusive except here there is a provision to add the material number of free good material, which is different from the material ordered. If left blank system takes both as same material
Reward if useful to u -
Free Goods ..... Want a solution in Outbound Delivery
There is an Audit Issue in our company:
We have created 10:1 Exclusive Free goods for a particular material. So when we order 10 qtys of that material then automatically the free item appear in the next line item....and if we make this 9 then the free line item automatically disappears.
Now in delivery exactly what is there in the order that is copied, provided the system gets all the materials after availibility check is done. Now if I change the main item from 10 qtys to 9 qtys, then still the free line item remains in the delivery (which does not remain in the order). Now according to PWC's audit.... the dealer may get 1 free when he should not get it. Nobody does this operation but the question is if somebody does this with mal-intention then how the system will stop this??
I am trying for some user-exits but cannot find a solution yet ..What if I want to add something in the "Free Good Delivery Control"? Say Z....
If I press F4, the following values are coming as Search Help - _, A, B, C, E. E is the one which I want to modify....as it is making proportionate to the scheme.
Say if I maintain 10:1 exclusive scheme with Whole Unit..... then if I enter 20 in order 2 appears as Free. Now in Delivery if I change it to 19, the free goods becomes 1.900. But I want to make it 1. If the user changes it to 9, then it should be 0, i.e the line item should not exist...or if it is difficult I will give a error message that "Delete the free line item and then make changes"...
Any idea .... I will then sit with the ABAPer and make the necessary changes... -
I set up the master data to "E" , and for every 5pcs , they get 1 pc free (exculsive)
When I created Sales Order and Delivery of 10pcs, i get 2pcs additional item free.
In the delivery, if i change the delivery quantity to 9pcs, the free goods is still 2pcs. If i change the quantity to 5pcs, that's the time it is changed to 1pc.
How can we set-up such that if it is changed to 9pcs (less than 10pcs), then free goods should be reduced to 1pc.HI Gemma
Its free goods delivery control,
in free goods there are two types , inclusive , exclusive free goods
inclusive free goods:=
system configure free goods in inclusive option like free goods quantity is going to be included in order quantity
EX- For 10 item is free ,the system configures free goods as 9+1
hope this will solve your problem
regards
venkat -
Hi,
I wants to add the Delivery costs to Free flaged Purchase order
pls help me on this
thanks,
MohanHi Mohan,
In SAP free goods means it is obsolutly free of charge....
If you want to customize your requirment, means you want to include the delivery cost to the product...
you need to do some coustomising in codition...
in Standard condition type FRA1, FRB1 ...etc are the item level conditions...When you make the PO for free goods, automatically in item level condition tab will disappear ( no price will come in line item). so you can't give the fright charge here...
Now you need to coustomixze new condition type (ZFR1) coping from FRA1 and in that tick as Header condition...
Now you create the PO fro free goods and tried to give the ZFR1 in the header condition of the PO..
I hope this will solve your question.
Regards
Anand -
Free goods determination with Free of charge delivery
Hello
After maintaining the Free goods Determination Record for a material using VBN1, when I create the order with order type OR, the free goods gets determined, where as when I create the order with order type FD, the free goods does not get determined. Can somebody let me know the reason for this happening and the solution please
Thanks in advance
AnoopHi
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion)
Free goods are only supported for sales orders with document category C (for example, not quotations).
Free goods are not supported for deliveries without reference to a sales order.
Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
Moreover your doc type FD has sales doc category as I in VOV8 in standards
Hence it is not working and wont work also
These SAP library statements answers your qn and the constraints of free goods in R3
As long as document category is not C in VOV8 for your order type you cant get free goods in sales order
Regards
Raja
Maybe you are looking for
-
How can I add a column in a finder window
How can I add a column in a finder window? I'm working with music files (mp3 and other formats) and would like to sort by artist, album, etc but this columns will not show up in Finder. The info is there but I just can't get it in a column I can use
-
Multiple email addresses in Scan to Email
Hi All, I would like to setup multiple email addresses on our scanner at work. I would like to press the scan to email button, and get the scaned page into multiple email accounts. Does anyone know if this is possible, and how to do it. I tryed many
-
I received my 3rd gen iPad on Fri. It seems to hate syncing. First time up, it had a problem and I tried several ubs ports until one worked. Now each time I attempt to sync either the iPad is not found, an internal error occurs and ends sync or iT
-
Hi All, I have a below requirement. Here in columns level I have below aging calculations. Now the user will have ability to select one of the following choices: >30, >60, >90, >120, >150, >180 Aging Buckets – 1. >30 Days Past Due for Key Date 2. >6
-
Dynamic Regions w/Train Component
I'm working on a web app (JDeveloper 11g) where one page has a dynamic reqion with a task flow associated with it that sets the fragment for the view. Most of the fragments for this region use a page template with a train component. Navigation using