Free Goods Sales Return

Dear All ,
I want to configure free Goods ( Exclusive ) Sales Return Process . Pl. Help me out
Ex : 10 + 1 Free Goods and Complete sales is returned with free goods.
Thanks in adv
Regards

Hi TKG997 ,
Assign the the item category for higher level item TAN item category to be determined should be RENN in Configuration . Then maintain Copy control settings is required to be maintained from invoice or Return order.
This should come through . I am not in front of the SAP system to test this requirement . Hence ,Please test and confirm .
Thanks and regards
Veera
Edited by: veera PV on Jan 19, 2011 12:28 PM

Similar Messages

Sales Order Status "Being Processed" after completion for Free Goods Sales

Hello All,
This problem is related to Free Goods Sales which is as follows.
The process-flow for free goods sales is first we raise a sales order, then we do outbound delivery for the sales order and then finally PGI of the goods.We don't raise any invoice and the Free Goods Challan is issued to the customers by running a report.
The document flow at the end always show the Sales Order status as " Being Processed" and Outbound Delivery & PGI as "Completed".I want the system to show the Sales Order status as " Completed" and not " Being Processed".How to do that?
Please suggest some solutions.
Thanks & Regards
Priyanka Mitra

Hi Raja,
Thanks a lot for your prompt reply and suggestion.
Now we are able to get the Completed status in Document Flow.
Thanks & Regards
Priyanka Mitra
P.S. - I would request you to go through another problem which we are facing in Shipment , please go through this and suggest some solution regarding it if possible.
I have already posted this problem in a separate thread few days back but am yet to receive any fruitful suggestion.
The problem is regarding Shipment Cost Calculation while doing STO which is as follows -
In our scenario the Shipment cost calculation is done on two basis -
1) Absolute Rate / Flat Rate Wise - For example for transporting of goods from Kolkata Depot to Delhi Depot is Rs. 20,000 fixed.
2)) Gross Weight Wise - where the weight unit is kg and rate for example is Rs. 4 / Kg. So for 10 Kg the shipment cost will be Rs. 40.
Now I want the system to calculate the shipment cost on Rate / Carton Wise i.e. How will I be able to calculate the shipment cost of 100 cartons if the rate is Rs. 100/ Carton.
How to configure this ? Please help in this regard.

Free goods in return order

Dear All,
We are creating return order with reference to billing document.Billing document has free goods as second line item .When I create return order only main item is getting referenced not the free goods .
Is it a standard behavior ? can we achieve to copy free goods in return order also??
Needed quick reply please... gone thru few sdn links .but all with confusing solution .....with all setting suggested I could not achieve
Kindly guide.........
Umesh Karanth

Dear Sir,
I have maintained for the combination of TANN TO REN as follows:
copying requirement for VBAP --153
copying requirement for business data--104
copying requirement for VBPA---004
copying requirement --303
Pricing type --D
But with this free goods are not getting referenced to return order. Is there anything I missed ?? pls guide
Thanks,
Umesh Karanth

Inclusive free goods sale without item generation

Dear All,
I have done successfully free goods sale exclusive with item generation but facing problems with inclusive & inclusive without item generation, in VBN1 for NA00 I have maintained following.
material code - Min Qty - 5 - from - 10 PC - are free goods 1 PC- calc rule - 1
for inclusive and exclusive both in VA01 showing extra lines for freee goods (sale as exclusive)
I have searched at http://help.sap.com/saphelp_470/helpdata/en/06/629ee9fb9c11d199ee0000e8a5bd28/content.htm
here it is mentioned that -"In the free goods master record in the Free goods category field, select free goods category 3 (inclusive free goods without item generation)."
But I have not seeing any field in VBN1 t code where I can maintained free goods category as 3. Can anyone revert how I can maintained this free goods category for inclusive free goods without item generation.
regards,
sp shukla

In VBN2 Maintain (scroll right to get all field)
- calc. rule (Calculation type for determining free goods quantity) as 2(Unit reference).
FYI, Others are 1 - Pro rata & 3 - Whole units
- free goods category 3 - Inclusive rebate (w/o item generation; only for sales).
And coorespondingly maintain Free Goods delivery control.
Regards
JP

Excise in free goods sale

Dear All
i've configured free goods sale(samples) which are excisable.wherein we don't collect excise from customer.
but, as per the configuration,from commercial invoice the accounting entries are
1.)customer account - debit(RS:266.76)
2.)Gross sales dom - credit(Rs:3237)
3.)qty discount - debit(Rs:3237)
4.)ED Collected -credit(RS:266.76)
AT Excise invoice the accounting entries are
1.)ED Paid - debit(Rs:267.00)
2.)Ed payable - credit (Rs:259)
3.)ECS payable - credit (Rs:5.00)
4.)secess payable - credit (Rs3.00)
my question is how to clear the customer account?
do we need to pass Excise JV through [J1IH] ?
CAN YOU PLEASE EXPLAIN HOW TO NULLIFY THIS AMOUNT ???
Thanks in advance
Maheshoe

Hi,
Try processing this scenario through Free of charge deliveries. Through this process, item is not relevant for billing, but update item category for item relevant for proforma billling.
Thus u can generate proforma invoice for this delivery document and then u can generate Excise invoice wrt proforma invoice.
When u create proforma billing document, there would be no accounting generated hence no posting of amounts into customer sales revenue accounts.
Regards,
Praveen.

Pro Rata Free Goods in Return Sales Order

Hi,
I would like to know if the system can automatically propose the Free Goods in the return sales order when created with reference to the billing document.
The Billing Document has a
Main Line Item -- 100
Free Goods -- 10
and when a returns sales order is created with reference to the above billling document, the system displays both the above line items in the returns order and if the customer is returning only 50 the requirement is the system must automatically propose 5 free goods once the mail line item quantity is changed by the user.
Regards
PJ.

Kindly let us know how you are giving free goods manually or you are using MATERIAL INCLUSIVE OR EXCLUSIVE
If you are doing it manually then in return order it will not determine it
If you are using MATERIAL INCLUSIVE OR EXCLUSIVE then it should determine automatically
*Free goods - In SAP there are two types Exclusive and Inclusive.*
Exclusive - Buy 100 and get 10 free. This means you have to buy minimum 100 pieces then on that you will get 10 piece absolutely free.
Inclusive - Buy 100 get 10 free. In this case it means you are paying for only 90 item and the other 10 item is absolutely free.
Configuration:
IMG - Sales & Distribution - Basic Functions - Free Goods - condition technique for free goods -
1. create the condition table.
2. maintain access sequence and assign the condition table to the access sequence.
3. maintain condition type and assign the access sequence to the condition type.
4. maintain the procedure for free goods and assign the condition type to the free goods procedure.
5. Activate free goods determination. In this enter sales org., dis channel, division , docu pri pro, cust pri pro and the free goods procedure.
6. now go to VBN1 - create free goods determination. Select your condition type, key combination and enter. Here you enter sales org, dis channel, customer no., Valid from and Valid to dates. Then you first select whether it is exclusive or inclusive free goods determination. By default it will be inclusive if you click on exclusive it will become exclusive and on top it will display inclusive. Here you enter minimum quantity for free goods and from what order quantity the number of free goods. You can control the delivery also in the second last column(free goods delivery control).
Save the record. Go to VA01 create the sales order , enter the item and the minimum quantity for free goods to be applicable and observe the results.
Edited by: Vishal J on Nov 24, 2010 1:10 PM

Free Goods after Return Sales

Dear Gurus,
I am doin the process of free good..scenario is that i have done the sales to my customer...now he return the good becoz of damage and he want the replacement as a free good....so wht will be the process? what i am doin is that makin the return sales order ---> PGR and after makin the order with order type SD subsiquent free delivery and makin the delivery.....now wht will be the credit memo is it will be issued to the customer or no? logically there will be no credit memo after the returns as we r replacing the good as a free good with diffrent order type SD.. but if u see the document flow u will see the return order is still being processed....so whts the best process for that?
Thanks & Regards,
Mohsin

There is no need for Credit memo now . We gereally go for either Free of charge delievery or Credit memo.
sales order -> Delievry ->invoice
Create return order with Invoice ->Return Delivery -> DO PGR
Please enter reason for return ( In the field Order Reason)
Now Create Free of charge Order w.r.t Return Order ->( Enter reason for Free of charge Order most probably there will be delievry block as u r giving material for free) Just goto VA02 and remove the block if exist.
Else create delievry free of charge delivery with respect to Free of carge order . Do Goods Issue .
Hope this will help

Free goods in return

Dear All
While taking return with ref to a particular invoice free goods are not copying into
Return sales order. I have checked that batches are specified mannually in sales order because of that
confirmation of service is not created for Delivery. If It is the reason why the main item is copying into Return Order.
In another case in the Original sales order Free good determined but not delivered because lack of stock,
in this case it is understood but system is showing the status of the orginal sales order is complete how come
it is possible.
Pl help.

Dear Sir,
I have maintained for the combination of TANN TO REN as follows:
copying requirement for VBAP --153
copying requirement for business data--104
copying requirement for VBPA---004
copying requirement --303
Pricing type --D
But with this free goods are not getting referenced to return order. Is there anything I missed ?? pls guide
Thanks,
Umesh Karanth

Return goods: sales return

Hi sap gurus,
If the goods are returned back, what happens to the returned goods.
What is the diff b/w Subsequent delivery free of charge and free of charge delivery

When the goods are returned back , it first goes to the Block/restricted stock.
The quality assurance department will varify it and if they certify as 'OK', then again a document is created with a different movement type to include it in the un-restricted stock.
In the process, we have to create a Return order (you have to put a order reason,why this has taken place ), which can be created either with reference to the Sales order or Billing document. Ofcourse it can be created without any reference also.
With reference to the Return order, a Return delivery is created and a Put away & PGR for the same.
Then, we have to issue a Credit memo for the return and **it is created with reference to the Return order**.
Before creating a Credit memo , you have to remove the "billing block" from the Return order.
your 2nd question
When you send a Demo material to your customer, you do not charge for it. It is for demonstration purpose , so no commercial value is associated.
To process this type of material, you create an order with Order type FD. This is called "Free of charge Delivery".
Another scenario,
You had sent some quantity of material say M1 to your cutomer.
Customer has paid for those quantity. Now, customer has returned suppose one unit due to damage. I want to replace this one unit by a fresh one. So, now I will send a fresh piece as replacement which is free of charge.
That means , I am sending subsequently one more unit/quantity which is now free of charge. This is processed with order type SDF and called "Subsequent delivery Free of charge".
The most important difference between "FD" (Free of charge delivery) and "SDF"(Subsequent delivery free of charge) is that FD does not require any reference but SDF always requires a preceding document.

Recalculation of quantity in free goods for return order wrf to invoice

Hello everyone,
I want to recalculate quantity of free goods category in a return order created with reference to an invoice, if the quantity in the High Level Item Category has changed.
For example, a customer bought 100 boxes of product "A " and received 10 of these for free. Then he wants to return 60 boxes. When I create a return order with reference to the invoice and change these quantity from 100 to 60, free goods item category still shows 10 boxes instead of 6.
Recalculation must be take place acording to the pricing date determination in order to apply free goods in a valid date.
Customized features reviewing:
1. There's not Item Category Proposal for Target Sales Doc type of the Return order, but item category of source bill type has one an is set to Pricing Type "D".
2. High Level Item category of free goods category is relevant for billing and is set to M "Delivery - related invoices-no zero qtys (in main bath items)"
3. Free goods category assigment has NORM as item Category Group, FREE ussage, High Level Item category is determinated for return order document type and Item category by default is the free goods category.
I will appreciate your support to solve this issue.
Best Regards,
Andrea Figueroa

Hello,
Thank you for your response.
My Discount Type of Free Goods determination is set to:
Calculation Rule: "2 - Unit reference"
Free Goods Category: "1 - Inclusive rebate (with item generation)"
Free Goods delivery control: "C - Delivery of main item is part. delivered, only with main item"
However, whatever the calculation rule is, if I change the quantity in the main item, subitem does not work.
I read about SAP Note 573598 that describes perfectly my problem, but is valid in 4.6 to 4.7 version and I have ERP version.
Thank for your help,
Andrea Figueroa

Free goods sale with addl material

Dear All,
I have maintained records for free goods in VBN1 with other material code in AddMat GrGd but while creation of sale order VA01 additional material is not showing, it is taking same material as free. In VBN1 Min qty 5, FreeGdsQty-10, CalcRule -1, Free Goods 2(Exclusive).
While creating sale order VA01 for 10 PC, it is taking same material as free for 1 pc in 2nd line and 9 PC as not free in 1st line. Plz suggest what wrong I am doing.
regards,
sp shukla

Hi,
Goto : VBN1--Specify the condition type for free Goods..by selectiong the req Key combination.
Select the button Exclusive and Maintain the data for : Materiual, Minimum Qty,from,Unit of Measure,Addnal free goods,Calculation rulke , Free goods.
*Speecify the Value for exclusive free goods *:
Under Addinal Material Free Good (Spc the respective material that is given as free good.).
This will solve your Problem.
Anywayz Further Confirmation you need to maintain is :
Free Good Delivery Control :
Maitain Condition Technique (SproSDBF--free good cond Tech for free goods)...there.... maintain cond tables, Access Seq cond types n Pricing Procedure.
n Finally Activate Free Good Determination(assign the free good procedure to the combination of SORG ,DC, Div, DocPri Pro and Customer Pri Pro)
Thanks.
Edited by: C.Ankit on Feb 13, 2012 9:16 AM

Free Goods -Sales tax

Hi,
I am working on Free Goods determination.
The ultimate aim is to capture excise duty and sales tax for materials which is sold as free to customer.
I could able to capture excise duties,whereas it is not charged on customer.
I could able to sales tax,whereas it is t charged on customer.
Only problem i face is for item category TANN ,tax value should be zero (o) means at the time revenue account determination it should not post to customer account .How can i configure it.
I tried with various options but i could not make it.
I thought of generating report keeping in the mind that where ever the condition type R100 >0.01,system should find out the value for sales tax VAT /CST.
Based on that value credit note have to raised for customer.
Here in our case Rs 2.93/- should be issued as credit note.Is there any other alternative option available.
Thanks,
Pradeep M

We are using the below one.
IF komp-PSTYV = 'TANN' OR komp-PSTYV = 'RENN' .
     IF XKOMV-KSCHL = 'JIVP' OR XKOMV-KSCHL = 'ZCES' OR XKOMV-KSCHL = 'JIVC'.
       XKWERT = 0.
     ENDIF.
     IF XKOMV-KSCHL = 'ZBPF' OR XKOMV-KSCHL = 'R100'.
       XKOMV-KSTAT = 'X'.
     ENDIF.
ENDIF.
ZBPF is our basic price
Regards
Jobi

Free Goods Sales Order for Charities with Credit Limit

Dear All
I have a scenario where POS (Point of Sales) has been implemented,the process of POS is ok,but the requirement of the client is they are giving some goods to charity,when ever a person comes with a special card (Issued by the company) the outlet will create a sales order for the same without any charges with a credit limit of 1000 SAR (saudi arabian riyal).
Requirement
1) Creation of sales order with delivering goods but without any charges.(should have effect in Stock)
2)These charities is been treated as Customer with a credit limit of SAR 1000 (whenever the credit limit exceeds system should block the order)
how this scenario can be mapped in SD,
Thanks in advance
Malik

Dear Malik
keep the process regular, which will help in blocking the charity customer when reached 1000 SAr at order level itself.
As customer need to be shown that he is not charged.
you can work on changing the display of output determination .
You can take the help of Ababer and display what ever client is asking for.
I think this may solve your query without disturbing you regular business process.
Regards
Pavan Kumar

Free goods- Sales Order Quota for a customer

Dear Experts
I want to restrict the Quota of an free SKU ( Material) to a specific customer.
For Eg:-- If a Distributor limit is set for a Consumer Offer as 100 CS. Once the 100 CS is exceeded, System must stop further orders of the item on the Same Customer. It should work similar to Credit Control only difference is that Restriction is at Customer SKU & Quantity.
Can you please guide me how can i capture the above requirement, is there any Standard process or shall i need to define any customized logic.
Does product allocation scenario help to achieve this.
Regards
Avinash

When we maintain the minimum order quantity field in the material master then we will get an warning message if we donot maintain that quantity while creating the sales order.
If you want an error message use the user exit "USEREXIT_SAVE_DOCUMENT_PREPARE".
you can write a coding here whatever you want Minimum, maximum and multiple limits by leveraging any custom table based on customer.

Free Goods Quantity

Dear SAP Guru's,
I have a query my user needs to prepare the report in that report he needs to identify actaul quantity and free quantity.
conditions are:
1. in free goods/ sales promotion scenario business offerd some free of cost materials to customer (free goods exclusion procedure) in this scenario business wants to prepare a report free goods quantity against actaul sales quantity.
Thanks,
Hussain.

Hello,
Item Category in Sales Documents for Normal Goods & Free Goods is different.
Thus with help of ABAPer you can develop a Z-Report which can fetch the required data based on Item Category of Sales Documents.
Hope this helps,
Thanks,
Jignesh Mehta

Free Goods Sales Return

Similar Messages

Maybe you are looking for