Free Iphone addon and CR2008 with Xcelsius

I just made a CR2008 Report with a Xcelsius swf inside of it. I imported into SBO8.8 PL17 and see it inside of SBO. I go to Administration  > Setup > General <Report and Layout Manager and select Visible for Mobile
I am able to select the report at the Iphone but it comes out blank (white screen only). Is there anything i can do to be able to see freely the Xcelsius inside the Iphone ?

Well the details are here.
• The type of iOS device you bought: iPhone 5S Gold 16GB
• The date you purchased it: 24th December 2013.
• Approximate date you first set up your device (When you turn on your iOS device for the first time, the Setup Assistant walks you through entering account information, turning on certain features, etc.) :- 24th December 2013(as soon as I bought my device.)
• Approximate date you opened the App Store for the first time: 25th December 2013.
• Your device’s serial number: F17L*****RC6.
• If you've been able to download any of the free apps, tell us which ones successfully downloaded:
I tried to download iphoto as it was showing free at one time last month in May.
I pressed download and the download started but I was not able to download the app completely.
Now when I retry to download iphoto a notification says this app is purchased but the download does not start.

Similar Messages

  • I have the iPhone 5 and have with 6.0.1 software version.  Although I had them when I moved from iPhone 4 to the 5, the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them.  They are still listed though.

    I have the iPhone 5 and have with 6.0.1 software version.  Although I had them when I moved from iPhone 4 to the 5 (could play them), the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them.  They are still listed in the iTunes library.  When I look in the Summary for the iPhone, it shows Audio as only .16 GB - I have over 5 GB of songs, so what gives?
    P.S. When I look at my Playlists most of the songs are greyed out.  However, at the bottom of the list there is a cloud icon with a downward facing arrow.  When I click on it each song starts to "load" and after a few minutes I have the songs back on in the list.  I have to do this to all my playlists (I had over 100) in order to get access to all my songs.  Then I did a sync and it happened again!
    I use iCloud for documents and some other things (calendar, contact, etc.) but am not aware that I have anything music-wise in the cloud.  Any thougnts?

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • I have the iphone 4 and PC with Windows Vista Basic. When I bought my iPhone syncs with iTunes on my computer, but now when I try to sync it tells me that Mobile Device Service was closed and I can not synchronize the phone. Try restarting Mobile Device S

    I have the iphone 4 and PC with Windows Vista Basic. When I bought my iPhone syncs with iTunes on my computer, but now when I try to sync it tells me that Mobile Device Service was closed and I can not synchronize the phone. Try restarting Mobile Device Service and uninstall and reinstall Itunes but still giving me the same error.

    http://support.apple.com/kb/HT3965

  • HT4061 just deactivated my iPhone 4s and replaced with 5s. The phone was wiped. I would like to activate it just to use it as an iPod. However I do not remember my iCloud username and password and cannot activate without it. How can I get past this?

    Just deactivated my iPhone 4s and replaced with 5s. The phone was wiped. I would like to activate it just to use it as an iPod. However I do not remember my iCloud username and password (from several years ago) and cannot activate without it. How can I get past this?

    Forgot iCloud username: http://iforgot.apple.com/appleid
    Forgot iCloud password: http://iforgot.apple.com

  • When I updated Iphone software and synchronized with MacBook, newest calendar entries were deleted. Other experiences with this? If so, how do I prevent this? I have Iphone 3G

    On at least 2 occasions, when I updated Iphone software and synced with MacBook, my newest calendar events were deleted. The information in Ical and on IPhone reverted to an older version of events instead of defaulting to the new information. I know of at least 1 other person who experienced this; is this a common occurrence? What is the reason for it and the remedy? How do I prevent this from happening in the future?

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps

    I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps

    with an iphone 3G the most up to date ios is 4.2.1 so you have a problem because whatsapp requires a higher version.  If you saved an earlier version of whatsapp you could install that otherwise you cannot use the app.  You will need to get a more up to date phone

  • Any help regarding iphone 4 and locks with o2

    any help regarding iphone 4 and locks with o2
    i just got my second hand iphone4
    and a friend of a friend said it was factory unlocked
    and received txt from o2 saying it was unlocked
    however when i got home i put my micro sim into it
    and
    itunes said
    "this sim card appears to be unsupported" or something similer
    it is factory unlocked because the model number in the settings is
    MC603B
    i rang o2 to ask for unlock. gave them the imei code and they said they have to send the request off to apple for a code

    i rang o2 to ask for unlock. gave them the imei code and they said they have to send the request off to apple for a code
    Obviously the iPhone was/is not unlocked or this would not be required, and there is your answer, which can take up to two weeks.

  • HOW TO RECOVER MY PHOTO ON MY IPHONE BROKEN and locked with a password

    HOW TO RECOVER MY PHOTO ON MY IPHONE BROKEN and locked with a password?

    I JUST SOLVED MY PROBLEM!

  • Bought a new iPhone 4s and dissapointed with the battery life (5.0.1)

    Hi guys, I'm new to this forums and to an iPhone... I've bought my first iPhone 2 days ago (an iPhone 4s) and I must admit, the battery life simply *****! It's unbeliavable, typing a status and checking facebook drains 2% of my battery, this is just insane. I was glad to find out that I'm not the only one with this problem. I researched online and saw all of Apple customers complaint about it, and realised that Apple didn't really care as much until the media kicked in.
    So yesterday I've downloaded the new 5.0.1 update, because Apple promised to fix the battery life issue, however I found no sing of battery improvement what so ever (my Location Services and Time Zone are both set to OFF). I think they've released this update in order to shut us up for a little bit, because Apple knows that it's not a bug BUT a hardware problem!
    I hope Apple can come up with an idea to fix this problem a.s.a.p. or they're going to lose a lot of customers. I'm starting to slowly regret from not buying phones like BlackBerry 9900 Bold, Samsung Galaxy S2 or the new HTC. I'm so dissapointed in the battery life...
    What do you think guys?

    Did you already try to set up your phone as new device?
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If this does not work, contact Apple Support, they can send you a test file to find out if your battery is damaged.
    You can also visit an Authorized Apple Service Provider to do so.
    iPhone - Contact Support - Apple Support
    Since this is a user to user forum, Apple can't hear you, feel free to use this feedback link:
    Apple - iPhone - Feedback

  • I want to sync my iphone, ipad, and macbook with the same username and password, is this possible

    i want to sync my ipad, iphone, and macbook with the same username and password.  is this possible and if so, how do i do it?

    You mean with the same iCloud account?
    If so, yes this is possible by accessing the iCloud account with the Mail.app on your Mac and with the iPad and iPhone Mail app. This allows for keeping server stored email account mailboxes synced between all three, syncing contacts, calendar events, notes, and Reminders synced between all three, and the same with the iCloud Photo Stream. In addition, you can have music, books, and apps purchased/downloaded from the iTunes store with one device automatically downloaded on the other devices.

  • Rules on selling my upgraded iPhone 5S and sticking with my iPhone 5?

    I just upgraded to an iPhone 5S and considering there are minimal differences between the iPhone 5S and the iPhone 5 that I am not too concerned about, I was thinking of selling the 5S online and sticking with the iPhone 5. My question: when I get my iPhone 5S, do I have to activate it on my account with my number to accept the terms of the new contract AND THEN switch the device back to the iPhone 5 allowing the 5S to be de-activated and ready for someone else to activate it on their Verizon account? I want to make sure there are no strict rules with this like the phone HAS to be activate on my account for a certain period of time before being de-activated.
    Any help would be appreciated!
    Thanks!

        Hello Craftymom22,
    It sounds like you have a plan set and your just waiting for the icing on the cake.
    The one concern that I do have is that when ordering the device. The device is typically ordered under your mobile number. Therefore when going through the activation instructions the device will attempt to default activate under your line.
    In this situation, it is best to have the MEID and SIM card available for the future user so that it does not try to activate to your account when the next user gets the phone.
    YosefT_VZW
    Follow us on Twitter @VZWSupport

  • I want to get rid of my laptop and use an iPad. Will I be able to keep my iPhone synced and updated with the iPad?

    I want to get rid of my laptop and use an iPad2. Will I be able to keep my iPhone updated and synced by using the iPad2 like I currently do with the laptop?

    No. You must use a computer to sync and update both devices via iTunes on the computer. The iPad2 cannot replace the laptop for syncing purposes.

  • Can I charge my iphone 5 and iPad with a USB 3.1 amp charger?

    I recently purchased a 120 volt duplex outlet that has a 2 port USB 3.1 amp charger built into it from my local electrical supply store. They said it would charge my iPhone 5 and iPad. Will 3.1 amps be ok to charge these devices or will it damage them.

    It will be OK. The charger is actually in the phone, and it regulates the charging current regardless of the actual available current from the USB source.

  • If I am a teacher, can I get a free iPhone? And is it worth it?

    Hello everyone.
    Today at work (I am teacher) one of my co-workers said that if you are a teacher and you buy a macbook, you can get an iPhone.
    Is that true? I have been thinking about getting one for myself.
    Also my daughter really wants an iPhone for christmas. I am most likely going to get her one, but we already have alltel. My son doesn't have a cell phone yet, so he can have my daughters old phone, and we can get her an iPhone.
    The thing is, it just seems like a hassle to get a whole new carrier for one phone. It would be at least 40 dollars a month with this plan (http://www.wireless.att.com/cell-phone-service/cell-phone-plan-details/?qsku=sku1040045&qplanCategory=cat1370011) and I don't even know if that provides text.
    I need help on these two questions!
    Thanks very much!

    No you do not get an iphone for free.
    I know that if you are a student and have to be college student, you get an ipod touch for free with the purchase on macbooks, and you get a free printer (was free during summer, but not sure about now).
    As for the sms, if you are on a single plan, texting is $5 for 200, I don't remember for the 1500 sms but for unlimited it's $20.

  • Crystal Reports for Eclipse and CR2008 with subreports

    SQL-Server 2005
    CR 2008, Ver.12.0.0.683
    Crystal Reports for Eclipse Plug-in Details:
    all Plug-in-files from Business Objects have the version 12.2.200.r454
    I create a report with subreports in CR2008. It's running perfect.
    When I load this report with subreports to Eclipse I can see the subreports in the report and I can click into the subreports. Each subreport is working in Preview, but when I want to preview the whole report with the subreports I get a black screen and the error
    eclipse.buildId=M20080911-1700
    java.version=1.6.0_11
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE
    Command-line arguments: -os win32 -ws win32 -arch x86
    Error
    Fri Feb 06 08:13:34 CET 2009
    Unknown Error (java.lang.NullPointerException)
    Info
    Fri Feb 06 08:13:34 CET 2009
    Plug-in Info: Business Objects, an SAP company - 12.2.200.r454
    java.lang.NullPointerException
    at com.crystaldecisions.reports.queryengine.QueryInfo.wF(Unknown Source)
    at com.crystaldecisions.reports.datafoundation.DFQuery.if(Unknown Source)
    at com.crystaldecisions.reports.datafoundation.DFQuery.a(Unknown Source)
    at com.crystaldecisions.reports.datafoundation.DFQuery.int(Unknown Source)
    at com.crystaldecisions.reports.datalayer.a.do(Unknown Source)
    at com.crystaldecisions.reports.dataengine.m.l(Unknown Source)
    at com.crystaldecisions.reports.dataengine.m.b(Unknown Source)
    at com.crystaldecisions.reports.dataengine.j.b(Unknown Source)
    at com.crystaldecisions.reports.dataengine.m.o(Unknown Source)
    at com.crystaldecisions.reports.dataengine.m.a(Unknown Source)
    at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source)
    at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source)
    at com.crystaldecisions.reports.dataengine.j.case(Unknown Source)
    at com.crystaldecisions.reports.dataengine.h.<init>(Unknown Source)
    at com.crystaldecisions.reports.dataengine.DataContext.a(Unknown Source)
    at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source)
    at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source)
    at com.crystaldecisions.reports.dataengine.DataProcessor2.new(Unknown Source)
    at com.crystaldecisions.reports.dataengine.DataProcessor2.try(Unknown Source)
    at com.crystaldecisions.reports.dataengine.DataProcessor2.int(Unknown Source)
    at com.crystaldecisions.reports.dataengine.DataProcessor2.I(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.fm(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.if(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.Y(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.moveToPageN(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.lightmodel.FCMPageFormatter.goToPage(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.elements.formatted.MultiPageModel.B(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.elements.formatted.MultiPageModel.A(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages$2.A(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages$2.call(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing.A(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing.syncExecute(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages.create(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedDocumentModeller.getValidFormattedPages(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedDocumentModeller$3.doWork(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(Unknown Source)
    at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$_B.run(Unknown Source)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Any good ideas?
    Thanks in advance.
    Regards
    Jens

    Hi Ted,
    the error happens in the preview of the main report. Each subreport preview in this main report is running.
    Regards
    Jens
    Edited by: Jens Kutsche on Feb 9, 2009 8:48 AM
    The preview of the main report is running in CR2008.
    Edited by: Jens Kutsche on Feb 9, 2009 8:56 AM
    When I start this main report with a jsp I get the same error:
    java.lang.NullPointerException

Maybe you are looking for

  • Test report to check output devices?

    Hi, Is there a test report that will print a page so I can check if the output device is working OK and printing like it should? I have create a output device with a device type but now I would like to check if it's configured OK. Is there something

  • Is there any way to get more than 99 tracks on a DVD?

    I am limited to 99 tracks in my iDVD project. is there any way to add a new Title so that i can add more? I know that there are DVDs with multiple titles, each title holding up to 99 tracks. anybody know how?

  • The Movie Channel (TMC) not searchable in TV Listings Search Box. ??

    On the TV Listings page on the Verizon website, when you type in The Movie Channel (TMC) or enter the number of that channel, the results are "no results".   WHY is that??  (i've only tried that one channel. Probably others don't show either.) Search

  • IDVD problems burning more copies if I shut down the compute

    I have always had a problem with burning iDVD projects. I can burn them fine but if I shut down my comp. & want to burn another copy later I can never do this. I think maybe I am doing something wrong when I quit iDVD. This time I can't even play the

  • ALV - simulate a enter in background

    Hi all, i have an ALV with an editable field. Now i import some values from a Excel File. How can i simulate in background that i fill a field and click enter on this field. I need this because a have some checks on this field and with REFRESH_TABLE_