Free Lance Labview Developer Required Urgently!!!!!!!!

Hi there,
We need a free lance Labview Developer from India for our upcoming project. Our company is bahrain. Applicant must have 5+ years experience.

Hi XFACTOR,
This is not the right place to post about job requirement. Please post here.And also provide more information like where the resume to be sent?

Similar Messages

CLD or CLA LabVIEW developer required by UK based Select Alliance Partner

Cal-Bay Systems in the UK are looking for talented LabVIEW developers to join our team. Must be qualified to at least CLD level with experience in test including a good understanding of sensors and signal conditioning techniques. SQL, .NET and sharepoint experience will also be advantageous. Contact [email protected]
Office based in Swindon but working from home may be an option.

Dear Sir/Madam,
I would like to get an opportunity to participate in your upcoming or ongoing projects and work for you as a team member. I am a final year MSc Electrical and Communications Engineering student at University of Greenwich UK. Please give me some task to deliver as my MSc final year project or it could provide results for my project. From this experience I intend to move to enhanced certification level and have an experience of working with professionals in the industry.
My experience of LabVIEW programming and hardware integration is two years plus and I have successfully done my CLAD LabVIEW certification at NI Week last year in London. On my job I was responsible to interact with clients, gather their requirements, suggest suitable hardware modules and then program and integrate to provide deliverable solution.
Please find my C.V. attached and contact me at your most convenient.
Best Regards,
Harris Junaid
Cell: 07813 764372
email: [email protected]
Attachments:
Harris_Junaid(CV).docx ‏24 KB

Please help suggestions for solving built-only compiler error: 'The VI is not executable. The full development version of LabView is required tofix this error.'

We have develoepd a software tool and build it on regular basis. It currently runs error free when compiled in the editor, but when we built it and run the executable stand alone we get the error.
'The VI is not executable. The full development version of LabView is required tofix this error.' plus a broeken error.
This menas an compiler error that is not present in the editor but in the stand alone version. We tried to identify errors as suggested in several posts in this forum, but so far unsuccesfull.
As the editor and its compiler do not see the error and are running fine and the stand alone version just syas 'find the error in the editor' in this case LabView is of no help.
Can anyone suggest a sensible or 'good practice ' way of searching for the source of this error?
Our project comprises hundreds of Vis over several libraries.
Thanks,
Chris

Thanks Craig for all your suggestions.
We seem to have located the problem in a new vi just added to the package causing conflicts by using the same vi names as other vis already present in the package. Excluding this vi removed the error.
It seems related to a conflict by having two vis with the same name, which was mentioned by LabView and interactively resolved when running the main vi from the editor. When successfully building the main vi the builder did not mention this conflict and reported a successful build, but when trying to run the executable it gave the cryptic error. The error caused us problems because there was no hint for the cause, just the suggestion to solve this in the editor, while at the same time in the editor the VI was running fine.
We will post about this in detail after we have positively proven that this actually was the case.
The .net version issue was already checked.
Performance was the same on all machines we tested on including the dev machine.
Debugging was tried nut did not help as the vi could not run (broken arrow). We assumed that debugging only helps in running faulty functioning vi''s. We did not check for broken arrows in sub-vis (after connecting), that could have helped, although our application has hundreds of our own vis.
In relation to your remark:
'Are you using many classes? Have you verified that the proper access scopes are set for functions calling those vis?'
Could you elaborate on setting access scopes. We were not aware of this option in LabView, although we realize this is a basic element of the underlying c code.
Ragrds,
Chris

I recieve the following error when running an executable ("This VI is not Executable. The full development version of Labview is required to fix the errors"

I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
I have the professional development system
I can run the main VI
all the required DLL's are in the dependencies section of the project window.
I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
Thanks in advance to all labview users for your help
Attachments:
project window.PNG ‏36 KB

other PNG
Attachments:
Broken Arrow on EXE.PNG ‏179 KB

"VI has error of type 1002288.The full development version of LabVIEW is required to fix the errors"

Hi,
I had created an executable in LabVIEW 8.6 on a windows XP 32 bit PC. The application uses some Vision VIs. The executable runs in most of the PCs except one. the PC is a windows 7 64bit. Initially i got the error "Labview Load error code 3: could not load front panel". I fixed this by changing the source file settings in the application builder. Now i am getting the error "VI has error of type 1002288.The full development version of LabVIEW is required to fix the errors" and the exe shows a broken run button.
But if i build the exe in the same PC i get no errors and it works fine. Moreover i have tested this exe in a different PC with the same configuration, it works there. I have tried reinstalling labview in the PC the problem still persists.
Solved!
Go to Solution.

Hi Rajshekar.
> Which version of LabVIEW are you using on PC with Win7 64bit? would like to check if there are any issues with LV2009 32bit on 64bit OS..
- The version of Labview on the win7 64bit PC is also lv8.6 full development system.
> Do you get the same error on the other PC with same config(Win7) when running the .exe generated using LV 8.6 on WinXP 32bit? just to make sure the problem is with OS or LV..
- the same problem occured at one more PC with the same configuration. but when i tested in an another PC of the same config it worked i am not able to isolate and decide that the error is based on one particular PC config.
I have listed the environments in which application ran and how the application was put in to the PC.
I would also like you to know that i have created an installer for the exe. I am also using NI vision in my application and this is the error "An error occured loading VI 'IMAQ GetImagePixelPtr'. LabVIEW load error code 3: could not load front panel"....and rest is what i said in my previous post
1. Use the installer to install the application.
2. just copy the exe created in LV 8.6 into a PC that already has LV development system installed in it
3. The PCs might either be a blank one with no history of LV installed in them
4. The PCs might have diffrent versions of LV development systems installed in them (8.2,8.5,8.6,2009)
All PCs that have LV development system(s) installed in them, was able to run the application except the one with win7 64, where i have tried uninstalling all NI software and use only the installer to install, install LV 8.6 full development system and try runnning the exe, nothing works.
Thanks

Required LabVIEW Developer for Gurgaon, Haryana, India

We are in urgent need of LabVIEW developer, who must have atleast 2 years of experience in below given areas:
1- LabVIEW Programming
2- Hands on various communication interfaces like GPIB, UART, I2C, SPI etc.
3- Instrument controlling.
4- Should able to do proper documentation.
5- Able to understanding Hardware PCB boards schematics.
Please reply on this post with updated resume.
CLA 2014
CCVID 2014

Muks,
Though it may not be relevant here,I was wondering how come you know his e-mail address ?

LabView Programmer required for free small project

I am looking for a Labview developer who can spend a few hours for free developing a small Labview project.
Please email [email protected] if you are avaible ASAP
Many Thanks
Dave

Why not learn LabVIEW and do it yourself.
The help within the LabVIEW forum is free and you get to learn a language as an added benefit.

Labview Developer Position in Northern New Jersey

Aavalar Consulting has been engaged to provide a Labview Software Engineer.
A job description follows:
Title:   Labview Developer (Test Applications)
Work Location:       Northern NJ Area
Is Telecommuting possible?    No
Work environment:   Cube in a suburban office building with a nice atmosphere and great parking.
Who does this position will report to?:   Vice President Software
What is the start date of the contract?:   ASAP
What is the size of department?:     <40
What projects will the engineer be involved with?:
Automated Instrument Control and Automated test of new hardware components
Software development in Labview and Test Stand to automate a Burn-In station.
Responsibilities:
Responsible for the creation of software to enable test instrumentation to command and receive data from systems to be tested. Will assume overall responsibility for the software on assigned projects for various Optical, Telecom, Automotive, Wireless and Aerospace products. Individual will develop and present software presentations to customers.
Role with the group: Developer - Individual Contributor - No management
Required Skills:
Bachelors degree in EE, CE, or CS or equivalent education with 2-5 years experience in related field. Experience in development of test system software using Labview, Lab Windows/CVI or Visual Basic required.
Desired Skills:
Instrumentation automation
System Integration
Documentation
>     Experience developing instrument control routines with Labview
>     Experience with Test Stand
>     Software Documentation experience
Selling point of the job:
State of the art technology and a good group of people.
Work Hours and Schedule:
Standard business hours with flexibility after a level of trust is established
Is overtime paid, and is it at straight time? Straight Time or Salary Position
Dress Code:   Casual to Business Casual
Who is involved in the interview process?     Vice President of Software, and the President
Target Salary: Open
Please submit a word version of your resume to [email protected]   Thank you.
Sean Handforth
Email: [email protected]
Aavalar Consulting, Inc.
Swedesford Corporate Center
649 Swedesford Road
Malvern, PA 19355
www.aavalar.com
Phone: 610.889.9990 x12
Toll Free: 877-4-AAVALAR
Fax: 610.889.9995
Cell: 267.278.2698
Aavalar provides contract software developers,
hardware engineers, systems administrators,
database administrators/architects, etc.
for Engineering as well as IT environments.
Retained and contingency search, as well
as recruitment process consulting is
also provided for clients who are building
in-house technical staff.

HI
I was just wondering if the call for an experienced LabVIEW developer with a background in Scanning Probe Microscopy is still open.
Best regards
Dr. Zoran Ristic

PDA LabView development per User's manual.

Develop PDA software as defined in the attached User's manual under Windows Mobile 5.0. Hourly compensation, possible off-site work. Thanks for looking.
Attachments:
DNTUSER2.pdf ‏790 KB
DNTUSER3.pdf ‏790 KB

Hello,
Here is an example of a LabVIEW project I did last year
http://www.inventeering.com/MassArray_NanodispenserRS1000(screen_samples).gif
Here is an example of a LabVIEW project I am currently working on.
http://www.inventeering.com/OLED/OLED_Demo1.wmv
I would like to introduce myself and offer my engineering consulting services. My name is George Miles and I am Electrical Engineer and the owner of a small Engineering Consulting Firm. I have over 25 years of engineering experience in a multitude of fields and areas. Fifteen of those years have been
providing manufacturing, engineering, and National Instruments (NI)
hardware and software development services and support with LabVIEW and
other NI products.
Hardware/Software
design Engineering, Systems Integration and LabVIEW development are a
key focus of my services with proficiency areas including test and
measurement, data acquisition, instrument controls, vision systems,
R&D product development in industrial automation machines,
bio-medical devices and fiber-optics sensors.
I
have been providing engineering services to fortune 500 companies and
small to mid sized corporations across California, Pennsylvania, New
Jersey and Massachusetts. Since its inception, INVENTEERING has
provided engineering solutions to a diversified industry of
manufacturing, engineering, avionics/aerospace, communications,
automotive, bi-medical and defense. I can provide project solutions and
hardware/software engineers for both large and small projects.
Please contact me to discuss any engineering hardware or software needs you may have.
Best Regards,
George Miles
INVENTEERING, Inc.
3943 Riviera Dr. Suite A
San Diego, CA 92109
Tel: 858-273-8483 or 858-926-5927
Fax: 858-270-8780
Skype: skype.gmiles (Free Internet Video
Phone requires Skype™ Software)
Email: [email protected]
Website: http://www.inventeering.com
Message Edited by [email protected] on 04-11-2008 08:32 AM
Message Edited by [email protected] on 04-11-2008 08:33 AM
Message Edited by [email protected] on 04-11-2008 08:36 AM

Seeking Labview Developer in Nothern Illinois

LabVIEW Developer
Company: Tecnova
Description
Tecnova is a National Instruments Alliance Member with a growing LabVIEW Department.
Come join our expert team!
We are looking for a self motivated LabVIEW Developer who will own their projects, complete tasks on schedule and on budget while building a relationship with the customer.
Must have broad experience in the following areas:
* Program and document robust LabVIEW applications which include user Interface, database, test sequencing, instrument communication, data acquisition and PID control
* Design and execute software test plans
* Prepare end user documentation and help file content
* Develop automated test, data acquisition, and control systems
* Contribute to multiple projects, and help develop pushing-the-envelope technology
* National Instruments hardware (PXI, cRIO, Field Point, etc.) experience desired
* Contribute to system design and specifications
* Involves extensive customer contact and moderate travel within Chicagoland area
* Must be intelligent, creative, and self-motivated
Requirements
* BS in Computer Sciences, Physical Sciences or Engineering
* 3 years of practical experience in LabVIEW programming
* High comfort level with scientific and technical terminology and the willingness to learn
* Test and measurement experience
* Must be self directed and able to meet objectives as directed
* The ability to effectively work independently in a fast paced environment, with experience adapting to changing requirements and to rapidly absorb new concepts and apply them effectively is essential.
* You must also have good communications skills. Presentation and communication skills, as well as being able to work in a team, are crucial.
Preference will be given to applicants with the following skills:
* Certified LabVIEW Associate Developer (or better)
* National Instruments hardware (PXI, cRIO, Field Point, etc.)
* Communication protocol (RS-232, GPIB, TCP I/P, USB, Bluetooth, etc.)
* Motion control
* Vision control
* PLC (Allen-Bradley, Honeywell, Modicon, Siemens, etc.)
* Schematic capture (OrCAD, AutoCAD, etc.)
* Database connectivity
* Application and instrument driver layers
* Experience with National Instruments PC based DAQ devices
* Experience with various sensors and transducer signal conditioning (microphones, accelerometers, temperature sensors, etc.)
* Actively involved in the LabVIEW community
Additional Requirements:
* Local Candidates Only
* Location: Gurnee, Illinois (Northern Chicago Suburb)
* No 3rd party resumes accepted. Principals only, no agencies or contractors
* Must be a Citizen or Permanent US resident, authorized to work in this country for any employer
* Because of the immediacy of this position, we are unable to sponsor people at this time.
About Tecnova:
Tecnova is a leading electronic product development and engineering firm that provides custom electronic hardware, mechanical, and software solutions. We offer exciting professional challenges, variety, and plenty of opportunity to roll up your sleeves and make a difference. Located far north of Chicago in Gurnee, Illinois, we offer excellent salary/benefit package with 401K. We are looking for innovative, creative, results-oriented people that desire a wide variety of projects in a challenging, fast-paced environment.
For more information about Tecnova see our website at www.tecnova.com.
Contacting Tecnova:
For immediate consideration, please send resumes to [email protected]

I am writing to put myself forward. As you can see from my CV, I have many skills pertinent to this role gained for less than 1 year as a successful Research Assistant. I am having very good knowledge in mathematics.I wish to move into this sector because it is a fast-moving environment and I am also interested in new technology. The skills that I have and believe to be highly relevant to this job and your company which include: Analytical thinking, Self motivated, Fast learner and staying calm under pressure. Additionally, I have undertaken CLAD course and qualified with 80% and believe my unique blend of skills can offer a great deal.I am confident that I possess the attributes you’re looking for and that my experiences gained in Research Assistant would provide invaluable insight and capability to your organization. I would welcome the opportunity to discuss my application in person.
Attachments:
Resume.doc ‏44 KB

Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
ErrorCode: -17600,
Failed to load a required step's associated module.
LabVIEW Run-Time Engine version 9.0.1f3.
When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
My TestStand Engine Version is 2012 f1 (5.0.0.262).
I'd appreciate any help on this issue.
Roman

Hi Roman,
There are a couple of things you can try:
1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
Check if the simple VI is loadable and runs without errors in TestStand.
If the step generates the same error, you should try a re-install of the LabVIEW development system.
If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
    Right-click "Build Specifications" and choose "New->Application(EXE)".
    In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
    Save the properties.
    Right-click on the newly created build specification and choose Build.
Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
Regards,
TRJ

Looking for a LabVIEW developer / Test Engineer in Atlanta

Averna at a glance
Averna delivers industry-leading test solutions and services for communications and electronics device makers worldwide, accelerating product development, quality and innovation:
Dynamic: The Averna team thrives on challenges and change, consistently making the prestigious Deloitte Technology Fast 50 list and winning Best in Test and other awards.
Young: The majority of our 300 employees are under 35 years old, and our high-achieving CEO was named to Canada’s Top 40 Under 40.
International: We have offices in Canada, the United States, Mexico, Japan and Hungary, with headquarters in Montreal.
Innovative: We were recently recognized as a Canadian Innovation Leader by the National Research Council Canada (NRC).
Instrumental: Our technology, expertise and drive help our global customers produce market-leading high-tech products in the telecom, transportation, electronics and multimedia sectors.
The challenge of the LabVIEW developer / Test Engineer
As part of the Engineering team, you will be involved in the development and integration of various software programs for validation systems. These systems are renowned for providing fast data throughput and extreme data integrity, while accelerating design cycles and reducing prototyping costs. The Engineering team develops a range of custom data acquisition systems to help our customers obtain accurate measurements and results.
Requirements:
Bachelors degree or college diploma in electrical engineering, software engineering or physics, Masters degree (asset);
3 to 5 years experience in software development with LabVIEW (preferably CLD);
Knowledge of NI TestStand is an asset (Preferably CTD);
Knowledge of video or RF test engineering
Knowledge of FPGA design (either VHDL or LabVIEW FPGA)
Available to travel regularly;
Professionalism, strong communication skills and interpersonal skills;
Team-player, autonomous, self-starter;
Please send your resume to [email protected] and mention the title of the position.

Is this position still opened?

LabVIEW Developer, Full Time, ISRAEL

QualiSystems (www.qualisystems.com) is looking for great people who love LabVIEW. We take pride in our code and by taking LabVIEW to its limits we have a need for only the best in the field. Here are the details:
LabVIEW Developer - Position #4038
Requirements:
4 years (or more) of experience in LabVIEW
Advantages:
Experience in Hardware QA.
Experience in the following fields: Communication, RF, Power, Digital
Experience with C/C++/C#
Experience with Scripting Languages
Experience with Communication Protocols
Experience with Databases
LabVIEW certification
A little bit about the company:
QualiSystems is a pioneer in the field of Functional Test Automation (FTA).
The FTA world is evolving from a collection of various tools to an enterprise quality management platform. QualiSystems' mission is to be the leading software company in the new FTA era.
QualiSystems' TestShell™ unique solutions consist of a suite of integrated applications that enables our customers to test, manage and optimize quality throughout the entire product lifecycle. These solutions enable the creation of complex high quality products, shorten time-to-market and significantly reduce costs. TestShell applications turn the functional testing process into a complete quality optimization solution.
QualiSystems' TestShell is used by leaders in industries ranging from telecommunications, cellular, aerospace and defense, consumer electronics, medical devices and semiconductors.
The company headquarters and expert R&D team are located in Israel. QualiSystems growing global presence includes representatives in Northern and Central Europe and North America.
Please visit our website (www.qualisystems.com) for more information.
Please send your resumes to: careers (at) qualisystems (dot) com

Hello Amiram,
if the position is not yet filled, pm me at coldchemist(at)gmail.com.
Thanks.
... And here's where I keep assorted lengths of wires...

Looking for LabVIEW Developer with 2-3 years of experience for Mumbai based Company

Software Plantation, Mumbai is currently looking for LabVIEW Developer who can contribute to the development of automated test, data acquisition, and control systems using National Instruments LabVIEW.
This position is located at Lokhandwala, Andheri West, Mumbai.
Requirements:
Applicant must meet the following criteria:
2+ years of LabVIEW experience.
Should be from Engineering background.
Knowledge of various communication protocols like RS-232, Modbus, USB, etc.
Knowledge of NI DAQ hardware boards.
Automated test, measurement, data acquisition, and/or control experience.
Good at documentation.
Knowledge of Software Development Cycle
Must be able to meet objectives as directed.
Ability to effectively work independently.
Ability to contribute and work in a team environment.
Ability to adapt to changing requirements, rapidly absorb new concepts, and apply them effectively.
Good communication skills.
CLAD certified developer will be preferred. Knowledge of C/C++, Linux is an added advantage.
If your background and qualifications match this position, please send your resume via email with subject line as: 'LabVIEW Developer Application'.
E-Mail: [email protected]
Note: Please do not post your resume on the job forum. Mail it to the above mentioned email ID.

Kindly send me your resumes on [email protected]

LabVIEW developer in UK

My company a large multinational with more than 10000 employees worldwide, is currently looking for an "entry level" LabVIEW developer in the North East of England, although all levels of experience could be considered.
If anyone is interested, please email your CV and Covering letter to [email protected]
This is the Job description:
1.    General information
The Engineer will work as part of a team developing software and hardware applications that support the needs of manufacturing. These will include in-house developed solutions for automated assembly, functional test and production monitoring. The Engineer will develop expert knowledge of the company's products and systems in order to best support these developments.
2.    Job Objectives
Efficiently design, program, document and maintain robust, user friendly, software and hardware solutions that reliably provide the required functionality and performance levels to support manufacturing processes.
3.    Opportunities
Work with a wide range of technologies (software, hardware and product).
Develop personal skill levels with support towards achieving recognized LabVIEW qualifications.
Participate in both site wide software initiatives and stand alone test or application solutions.
Work alongside experienced LabVIEW developers.
4.    Place in the organisation
Direct Manager: Manufacturing Engineering Manager            (via Senior Engineer)
Reportee(s):            0
5.    Description of duties
Contribute to generation of software requirements and specification documentation
Generate appropriate documentation and records during software creation, amendment and testing, utilizing standard revision control and review procedure.
Propose and implement new/best practice software development techniques
Contribute to creation of future strategic targets
Assist with the training and guidance of apprentices, operators or others where appropriate
Undertake training and development activities where appropriate
Occasional travel off-site to conduct inspection of new equipment, attend training courses and provide support to remote sites
6.    Required competencies
Education:
Essential
Degree level qualification or similar experience
Desirable
Degree in Science, Engineering or relevant Technical Subject
Experience:
Essential
Previous experience creating software to interface with hardware using LabVIEW
Desirable
Experience of an industrial work environment
Skills & knowledge:
Essential
Experience of LabVIEW programming, CORE 2 level
Experience with automation hardware
Desirable
Knowledge of developing test software for automatic execution
Experience with other programming languages (C, Assembler, Java etc)
Object oriented programming knowledge
Knowledge of SQL database implementation

Dear Sir/Madam:
May I know what is the company? I would like to know its name in order to be aware of future similar opportunities.
Kind regards.
Attachments:
Presentación Julio 2011.ppt ‏2943 KB

Free Lance Labview Developer Required Urgently!!!!!!!!

Similar Messages

Maybe you are looking for