Free License ship with products?

Look like everything is free, but it is not.
Q1) What is free and what is not free?
Any one how to find out all the licneses for Java
A1(answer):
Q2)Which one is free to ship with our products?
A2(answer):
Q3)What about JDK? or J2EE, Or ..?
A3(answer):
Q4)Which one is Not free to ship with our products, so I have to pay under which conditions?
A4(answer):

NO this is no an homework.
I just think, if I learn some thing is not free
license ship with my application then it is useless.
Just like window is not open for everybody, why do we
need to learn it. Useless is it?
That is why I love javaHi again,
that windows isn't free, is not a big trouble - you can't merely find personal computers where it is not installed. Why to learn it? - Operation Systems are working in a similar way inside - if you understand one in detail, you have less problems in understanding another one - ofcourse there are many differences, but the principles they are based on are the same in most cases. So you do not have to start by Adam and Eve all the time, but only to find out, what the differences are - and ofcourse there is different syntax or a different GUI or both. Java counts on a similar design of todays most used OSs, otherwise it would be difficult to implement the JVM or JRE resp. JDK for it.
If you want to ship things done by Sun with your products you have to do your "homework" first, if you don't want to spend much money for lawyers - it is not just "kidding" to ignore copyright aspects - your commercial carrier can be over before it really starts. So, do your "homework" and read the licenses that you have accepted by downloading it - and stick to the rules of it - that is really good advice!
And another thing - persons, that don't stick to license agreements, are those, who make it difficult for developers to go on with their work. The people at Sun must be paid too, therefore Sun has to earn money - they don't do it with the JDK Standard Edition, but with other products - and they have to, the people who work there will buy bread and butter tomorrow too.
It is very egoistic, to want all things free - why don't you ship your products totally free? - You have invested a lot of work?- You will earn money? - Ok, but then accept, that there are other people too, who want to earn their money too, and respect their work if you use their products, especially if this products are free.
greetings Marsian

Similar Messages

HELP...I can't reset default views...how do I set "designer view" to default that shipped with product.

Help...how do I reset "Designer View" to what shipped with product. I was using a tutorial and totally messed up the designer default view, and cannot restore it by going to workspace "Designer View" reset...it just resets it to the same corrupted view. I seem to be stuck in live mode with no buttons to come out of live mode.

While in the Designer space, have you tried choosing Windows > Workspace Layouts > Reset 'Designer' ? If that doesn't work, you may have accidentally overwritten the default Designer workspace with the one you see now. If that's the case, one (pretty drastic) alternative is to reinstall. Another less drastic approach, is to replace the Designer.xml in your user Configuration > Workspace folder with the one I've attached.
Let me know if you need help finding your user Configuration folder.
Best - Joe
Joseph Lowery
Author, Dreamweaver CS4 Bible

Windows 7 Pro SP1 ships with IE11. I need IE8 that used to run on Win7 - what choices do I have?

Hi all,
The reason for this post is our need for IE8 for compliance with company requirements (web apps of a big and cumbersome company that will only run on IE8).
We received a non hand manageable number of brand new dell aio 9020 machines with Win7 Pro SP1 and need to downgrade to IE8.
The official microsoft download site features IE8 for Vista, Server 2008, XP and not for Win 7. None works on Win 7.
I would like an official IE8 setup that runs on Win7 as it used to
in the initial versions for sure. Other requirement is that it should be in italian localization, but though important I consider it secondary.
The expensive solutions are to reinstall machines with Win7 off an old version of Win 7 (where to find old Win7 setup disc, how to use current license shipped with the PC's?)
A creative idea I had was to try to extract IE8 form "Internet Explorer Application Compatibility VPC Image" by pulling any dependency / dll ecc but I assume the result might not work. How, if viable is yet a question and it would only be in english.
I am here asking anyone or better official MS people, what solutions there are.
The end result must be an actual IE8 running.
Grateful for help - even pointing to another section or place to ask for this kind of support,
GG
PS happy new year!

Hi all,
I found a solution that I will share in case someone else is seeking this answer.
I did not try the solution provided here http://support.microsoft.com/kb/2579295
I instead disabled the windows functionality (not sure wether necessary, will test and edit this)
Dism /online /disable-feature /FeatureName:"Internet-Explorer-Optional-amd64"
;FYI dism /online /get-features - for a list of windows features to enable or disable
Probably unnecessary to disable anyway but worth sharing dism for other potentially interested users.
Then I uninstalled updates of IE and from IE11 I found IE8 (the base of Win7)
; FYI dism /online /get-packages /format:table > updates.txt - then read IE related and uninstall as follows
DISM.exe /Online /Remove-Package /PackageName:Microsoft-Windows-IE-Hyphenation-Parent-Package-English~31bf3856ad364e35~~~11.2.9412.0 /quiet /norestart
DISM.exe /Online /Remove-Package /PackageName:Microsoft-Windows-IE-Spelling-Parent-Package-English~31bf3856ad364e35~~~11.2.9412.0 /quiet /norestart
DISM.exe /Online /Remove-Package /PackageName:Microsoft-Windows-InternetExplorer-LanguagePack~31bf3856ad364e35~amd64~de-DE~11.2.9600.16428 /quiet /norestart
DISM.exe /Online /Remove-Package /PackageName:Microsoft-Windows-InternetExplorer-LanguagePack~31bf3856ad364e35~amd64~fr-FR~11.2.9600.16428 /quiet /norestart
DISM.exe /Online /Remove-Package /PackageName:Microsoft-Windows-InternetExplorer-LanguagePack~31bf3856ad364e35~amd64~it-IT~11.2.9600.16428 /quiet /norestart
DISM.exe /Online /Remove-Package /PackageName:Microsoft-Windows-InternetExplorer-LanguagePack~31bf3856ad364e35~amd64~nl-NL~11.2.9600.16428 /quiet /norestart
DISM.exe /Online /Remove-Package /PackageName:Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~11.2.9600.16428 /quiet /norestart
Restart and find IE8 :-)
For other debloaters or second hand customizers (sysprep is an option, not on all scenarios like OEM installs and no specific concerns)
@echo Clean up PC - wmic product get name to know names of other packages
wmic product where name="Dell Digital Delivery" call uninstall /nointeractive
wmic product where name="Adobe Reader XI MUI" call uninstall /nointeractive
wmic product where name="Dell Protected Workspace" call uninstall /nointeractive
wmic product where name="DELL OSD" call uninstall /nointeractive
I also had some McAfee unrequested software the command line of which I intercepted through procexp
;remove McAfee SecurityCenter Manually - will integrate with more automated way
"C:\Program Files\McAfee\MSC\mcuihost.exe" /body:misp://MSCJsRes.dll::uninstall.html /id:uninstall
;mcafee shared c runtime
MsiExec.exe /x {EF79C448-6946-4D71-8134-03407888C054} /qn

Need help with Photoshop and "Licensing for this product has stopped working" message. Adobe fix isn't working.

I am still using CS3. A while back I received an error: "Licensing for this product has stopped working" for my CS3 programs. I used the recovery program suggested by Adobe and was able to get Illustrator, Flash and Dreamweaver to work, but I still can't open Photoshop or In Design. I went back to the Adobe site and did every other trick they suggested to fix the error, but nothing has worked.
I then tried to uninstall photoshop from my CS3 suite (so I could reinstall) but got a JavaScript Alert: "Critical errors were found in set up. Please see set up log for file details." Seeing as I am not the best with the behind the scenes technical stuff, I have no idea what this means or where the set up log even is. Any help anyone can provide?
I have had CS3 installed on my computer for over a year. I started having problems about 4 months ago.

I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?

Downloaded AVG protection and it cleaned my computer, now whenever i try to start photoshop it says that there is a problem with the licensing of the product and gives me an error code 213:11

Exactly as it says above. The computer was given to me as a gift, and the person who gave it to me had already bought photoshop and put it on for me. Photoshop was working perfectly before AVG did the computer scan, and now every time i try to use it a window comes up instead that says "A problem has occurred with the licensing of this product. Restart your computer and re-launch the product. If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen. Error: 213:11"

Apparently it "cleaned" away needed files.
Most likely you will have to reinstall Photoshop to get all the files back.

Get "Licensing for this product has stopped working" error on my New Mac with old Adobe software

hi people, i've recently purchased a new machine and can't work out how to get Illustrator cs3 or photoshop cs5 working on it...
photoshop says "Licensing for this product has stopped working. you cannot use this product at this time. you must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help", which is strange as it said some different before i tried asking adobe support about this...
illustrator says the same thing.
customer support said i need to ask here because they can't provide support for these products.

thanks for response, let's start the dialogue.
what OS version?: OS version 10.9.3
Have you deactivated Photoshop on the old machine? No, i am not inclined to try this as i do need a working version for work, customer support tells me that i've purchased a serial key but they won't tell me what it is, just that i could try using it... can't find any reference to this on my machine though:(
On how many computers have you (or someone else) installed Photoshop and register with your license?1 i think..
Have you tried uninstalling, cleaning and re-installing? no, though i've tried to find out how and can't even manage that:( went to the adobe site and could only find their creative cloud thing which requires me to pay monthly:/...
thanks

I work with a Mac & I had to restore my computer for my time machine back-up. When I attempt to open/edit a photo with either camera raw or photoshop I get the following error message: Error 150:30 , it also sys that licensing for the product has stopped

I work with a Mac & I had to restore my computer for my time machine back-up. When I attempt to open/edit a photo with either camera raw or photoshop I get the following error message: Error 150:30 , it also sys that licensing for the product has stopped working?

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

A problem has occured with the licensing of this product?

I installed a new hard disk in my MacBook Pro. I had made a backup and after restoring from that everything works except Adobe products. I get the message:
"A problem has occured with the licensing of this product. Restart your computer and re-launch the product. If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:5"
I have run uninstall, then reinstalled and reregistered (Photoshop, Illustrator and inDesign). Still the same result.
Any ideas about what I can do?
markdevisser

You cannot restore Adobe apps from a backup. Run the Creative Suite Cleaner Tool, reinstall them properly. If it still doesn't work, you seriously should consider reinstalling your machine from scratch without resorting to the backup data. Doing this may have introduced other issues like retaining a flakey configuration that prevents services from being run or invalid user permissions. Tracking this down would be more complicated than just starting over with a clean slate...
Mylenium

I have downloaded AI Trial but am getting a Configuration Error as follows 'A problem has occured with the licensing of this product. Restart your computer and re-launch the product. If this problem still occurs after restarting, contact Customer Support

I have downloaded AI Trial but on launching I am getting a Configuration Error which reads '
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:5.
I have tried the restart suggestion, but the problem persists.
Can anyone assist.
TIm

Tim,
This may be one for this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or for a chat,
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or for Adobe phone Support,
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

I am having a problem opening pdf files. I get an error message saying a problem has occurred with the licensing of this product. Restart your computer and re-launch your product. If this problem still occurs after restarting ... error code:213:19 Can

I am having a problem opening pdf files. I get an error message saying
a problem has occurred with the licensing of this product. Restart your computer and re-launch your product. If this problem still occurs after restarting ... error code:213:19

Hi AdobeFiles,
I'm sorry to hear that you're unable to open PDF files. Please see this Help document: Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI for solutions.
Let us know how it goes!
Best,
Sara

Acer Aspire Switch 10 Shipped With No Product Key For Office 2013

I bought a refurbished Acer Aspire Switch 10 and it shipped with no product key for microsoft office 2013 home and student. What should I do?

It is on a orange pamphlet that looks like this image. The product key is on the back.

Disappointed with product introduction

I am new to FrameMaker. Based on its popularity and others' comments, I'm sure it is a fascinating, feature-packed program that can do a lot for me in my technical writing. However, I am disappointed with Adobe's lack of introduction to the product. Any product should come with material that tells me what is special about it and who is meant to use it. It should also have sample work to show what can be done with the product. Instead, Adobe begins with a Getting Started with FrameMaker that introduces the user interface and screen basics, which are not yet of concern at this introductory stage. Note also that there is a section called "What's new in FrameMaker 9", clearly oriented to past users, but totally ignoring the need of new users to learn about the essence of FrameMaker.
I hope the folks at Adobe are listening and will provide some introductory material. I would be most thankful for it.

hmm63 wrote:
I am new to FrameMaker. Based on its popularity and others' comments, I'm sure it is a fascinating, feature-packed program that can do a lot for me in my technical writing. However, I am disappointed with Adobe's lack of introduction to the product. Any product should come with material that tells me what is special about it and who is meant to use it. It should also have sample work to show what can be done with the product. Instead, Adobe begins with a Getting Started with FrameMaker that introduces the user interface and screen basics, which are not yet of concern at this introductory stage. Note also that there is a section called "What's new in FrameMaker 9", clearly oriented to past users, but totally ignoring the need of new users to learn about the essence of FrameMaker.
I hope the folks at Adobe are listening and will provide some introductory material. I would be most thankful for it.
I agree that it's hard to find good getting started training materials in the FrameMaker package that you buy. Some versions of FrameMaker were shipped with a training disk, or with training materials on the main disk. I'm not sure if recent versions do.
Recently some Adobe products have come with a 30-day free subscription to Lynda.com online training. Sometimes there's something in the package that tells you about these goodies, and other times you'll get email that tells you about them. You probably have to register your software at Adobe.com. You'll need to create an Adobe user account (free) if you don't have one. The adobe.com site isn't easy to find your way around. On the home page, type register in the search box at the top right, click Product Registration, and the registration log-in page appears. You can create an account if you need to.
Search Google for terms like "adobe.tv framemaker tutorial," "free online video training framemaker," and "framemaker training resources" without quotes for some good links. These searches include content from the official adobe.com site as well as others.
Forum participants are users who volunteer to help others in the community, as they've been helped - passing a torch. You're always welcome to post questions here. It's most helpful to would-be helpers if you state the subject of your question clearly, one question or problem per message thread. And, provide your exact version of FrameMaker; it's the version number (like 9.1) and the build number (pxxx) displayed with Help > About FrameMaker.
And, you can help others who struggle to find good introductory material in the package by posting a formal request at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Free license and isolation groups

Hello,
We have just installed CPS in our Solution Manager 7.1. The CPS release is Build: M28.17-35130.
The license keys - free - are:
CPS-Basic ProcessServerService.SAP.ApplicationsAPI true
CPS-Basic ProcessServerService.SAP.SolutionManager true
CPS-Basic ProcessServerService.SAP.XBPExternal true
CPS-Basic ProcessServerService.SAP.limit 0
CPS-Basic System.NamedUsers.limit 10
CPS-Basic System.Production true
CPS-Basic company.contract CPS-Basic
CPS-Basic company.name xxxxxxxxxxxxxxx
CPS-Basic product.name SAP Central Process Scheduling by Redwood
CPS-Basic signature 3
CPS-Basic system.id SAP:SOL_00
I have read in the Administratio guide and in other posts that in the free license i cannot define more that one sap system client per isolation group, but I have the doubt of how can I monitor more than one sap system or even more that one client in the same sap system?
Thanks and best regards,
Ana.

Hello Ana,
you can monitor SAP CPS jobs across Isolation Groups from your SAP Solution Manager. That's a special feature of the SAP CPS integration into SAP Solution Manager.
Just import your (Solution Manager) user into all relevant isolation groups (same user name in SolMan and SAP CPS) and then run job filters or custom queries from the Job Management Work Center.
See the second part of my blog /people/martin.lauer/blog/2009/05/28/monitoring-job-chains-with-sap-cps-by-redwood-and-sap-solution-manager for more information how to call CPS filter and customer queries from the Job Management Work Center.
As a prerequisite you will have to setup the connectivity between SAP CPS and SolMan. See the following notes: 1122497, 1054005, 1129030, 1037903.
If you have any issues in setting up this scenario, please do not hesitate to contact me.
Kind regards,
Martin

CS3 Help for "Licensing for this product stopped working!"

Today my CS3 gave this error, although I've been using CS3 without any problems with VISTA since last April! See product & OP sys info at btm.
I searched for help, I found under TechNote kb402004 the implied solution! Well not quite since it is NOT working! I spent today over 8 hrs in an attempt to fix this.
The error in detail: Licensing for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help."
OK, I am my own IT administrator, I called Adobe 1-800-833-6687 but after selecting option 1) on the phone just rings and rings, no answer for about 1.5 hrs!!! So I gave up!!!
The TechNote does say to uninstall; well a bit difficult because I have to deactivate first! But for that CS3 has to be running!
SO followed the solutions all 3 of them.
1) Doesn't do anything, same problem!
2) is the same result!
3) part 2, I moved the cache file as indicated, cS2 comes alive, well barely thus I was able to deactivate.
However I was not having luck in uninstalling from VISTA. Using Start >Control Panel>Uninstall program> Adobe Photoshop CS3, absolutely refused to work!
SO I tried manual uninstall (the hard way) as out lined by TechNote kb401501, tried several times went through all the steps, including downloading the Microsoft msicuu2.exe to do it with! After several tries it did finally deleted CS3, so I could attempt a clean re-install!
SO I downloaded CS3, well I could only download the trial one, I do not have the CD disk, as my CS3 was an internet download (upgrade). 20 minutes later (luckily for hi-speed it only took 20 minutes for the full download, I tried to reinstall! Turn off antivirus, turn off firewall so I cam install!
Not quite! It failed. SO I had to go through all the above again to clean it out from VISTA. Download again! Done this 3 times before it finally started to install. Of course that is the old version, why would Adobe be kind enough to have the updated version available to install in the first place??? OK so downloaded another 180 MB or so, tried to update! Well the update crashed 4 times too, before CS3 finally was updated to 10.0.1. Then I had to register and activate CS3 again! Great it should work, well so I though!
Well not quite it gave me the same error!!!! SO what is wrong with CS3??? I need help! Thank all of you who can help me!! System Details:
Adobe Photoshop Version: 10.0.1 (10.0.1x20071012 [20071012.r.1644 09:30:00 cutoff; r branch])
Operating System: Windows NT
Version: 6.0
System architecture: Intel CPU Family:6, Model:15, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 2
Processor speed: 2400 MHz
Built-in memory: 3070 MB
Free memory: 1719 MB
Memory available to Photoshop: 1681 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXXXX
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS3\
Temporary file path: C:\Users\LASZLO~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 291.7G, 69.6G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS3\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 10.0 (x101)
Anaglyph Flip NO VERSION
Angled Strokes 10.0 (x101)
AntiGhost NO VERSION
Average 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
BMP 10.0.1 (10.0.1x20070928 [20070928.r.1642 08:15:00 cutoff; r branch])
Bas Relief 10.0 (x101)
Camera Raw 4.3.1
Chalk & Charcoal 10.0 (x101)
Charcoal 10.0 (x101)
ChromaSolarize NO VERSION
Chrome 10.0 (x101)
Cineon 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
Circle to Square NO VERSION
Clouds 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])

Which operating system?
Try
Win: http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
Mac: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

Crystal reports free license issue...

One of our customers receives the following error when using our software in a Citrix environment.
"A crystal reports job failed because a free license could not be obtained in the time allocated. More licenses can be purchased from Crystal decisions."
Does anyone know how to resolve this issue? or where to purchase more licenses?
The software comprises Winforms dotNET Famework 1.1 application using Crystaldecisions dotNET library to load and run reports created with Crystal 8.5
Thankyou for any help you can provide.

Hi,
Check this:
https://boc.sdn.sap.com/
https://boc.sdn.sap.com/node/19937
https://boc.sdn.sap.com/developer/gettingstarted
https://www.sdn.sap.com/irj/sdn/forums
Free trials:
http://www.businessobjects.com/product/freetrials.asp
Hope this helps...........
Rgs,
Ravikanth.Indurthi

Free License ship with products?

Similar Messages

Maybe you are looking for