Free sample from vendor (import) need to pay freight and duties

All SAP Gurus,
Vendor outside India has send us free sample.
But we need to pay duties and freight over it.
How this can be mapped in SAP?
Regards,

Hi,
You can post fright charges by creating purchase order for 0.1 rate with fright & duty charges as per your requirement.
Also you can pay fright charges by direct posting in vendor account with FB60.
Reason: - In Free quantity purchase order you can't enter fright charges for material, So you have to crate normal purchase order for fright charges.
Regards,
Mahesh Wagh

Similar Messages

  • Keynote and pages are now free, but why do i need to pay for them still when there now free?!?

    keynote and pages are now free, but why do i need to pay for them still when there now free?!?

    Users can obtain the iWorks and iLife applications free, if they purchased a Mac after the beginning of October 2013.
    Older Mac purchases require a paid purchase of these applications.

  • I am 19 days from my contract needing to be renewed and I broke my screen.    How far in advance can you renew before the actual renew day?

    I am 19 days from my contract needing to be renewed and I broke my screen.    How far in advance can you renew before the actual renew day?

    Basically it is on the day your contract ends. However some Verizon wireless corporate store managers can over ride that and update possibly a week early. But its iffy.
    Now Verizon will let you upgrade to the Edge program but you have a broken device and they will prey on you since you are desperate for a device. Edge plan is paying full price over 20 months and paying taxes on it up front, you then after paying 60% of the device off can edge up to another device. Now if you pay 60% off at anytime after 30 days you can continue to trade them in for new as much as you want.
    Or you can wait it out get a new free device under contract or reduced cost device again under a 2 year contract.
    The edge plan is no contract.
    Good Luck

  • Data from a file need to be read and mapped  into a custom table of R/3

    Hello all,
    This is related to inbound to  SAP ECC via SAP PI.
    There is a requirement concerning PI part that data from a file need to be read and mapped  into a custom table of R/3.
    To have this scenario developed , do we have any other  option than the Proxy ?
    My understanding is as follows : File --> SAP PI --> Proxy
    You suggestions are welcome.
    Regards,
    Rachana

    Hi Ravi,
    As suggested by Inaki, you can use proxy communication in recever.
    but you can also use the below
    FILE -----> PI -------> PROXY
                                  RFC
                                  IDOC
    to communicate to ECC system.
    Regards
    srinivas

  • HT201359 What does it mean when a purchase is billed to "store credit"? Is it one of those iTunes gift vouchers? Only reason I ask is because I downloaded Ken Follit's FREE book from the 12 days of Christmas app and seem to have been charged 10.99 for it!

    What does it mean when a purchase is billed to "store credit"? Is it one of those iTunes gift vouchers? Only reason I ask is because I downloaded Ken Follit's FREE book from the 12 days of Christmas app and seem to have been charged 10.99 for it!?

    Thank you so much for the link. Am persevering thru it, will get there eventually, as I had already tried to press the Report a Problem link on the invoice, but it won' t connect to iTunes store on my iPad, it keeps saying can't connect. Infuriating. But thank you, you found me a link I would have taken ages to find.

  • Free Goods Import Process with Customs, Freight, and Other Taxes.

    hi,
    I have to import free goods but have to pay for Customs, Freight, and other Taxes.
    1. If I tick Free Goods Indicator in PO Line Item, Condition Tab at line item disappears. It will not to calculate other conditions at Header level also. - So I cant execute this option.
    2. If i take price of material and insert Condition Type: R001:Discount/Quantity with material price/qty, then it gives Error Message - "Price Must be greater than 0".
    So, Is there any way through which I can procure Free Goods and can maintain conditions for Customs, Freight, and other Taxes in Purchase Order.
    Please help me in this regard.
    - Jignesh

    Hi,
    1) Create an import PO in ME21N with material price and all custom duty conditions (as you normally create). no need to put free tick indicator.
    2) Process MIRO for goods and delivery costs simultaneously.
    3) Maintain zero amount for goods item and actual values for the duties (Ensure selection of goods item including delivery cost items)
    4) Save the LIV document
    5) Check PO item history got updated with IR-L and DCIn. (IR-L will updated with zero amount)
    6) Do  MIGO w.r.t. IR document number.
    7) GR FI document will get updated with the non-set off duty values only.
    Regards
    Rajesh

  • Payment Term from Vendor is not going to Freight PO

    Hello All,
    I am not MM consulting but I need to solve a problem.
    As we know when I save a shipment cost document SAP creates a automatically PO for carrier as the configuration.
    I have the payment terms registered in the Vendor Master (Carrier) but when I save my ship cost document and the system creates the PO the payment terms it is not appearing in the PO and consequently is not going to MIRO.
    How should I do to take the Vendor Payment Term to the Freight PO?
    Thanks
    Marcos

    Hi,
       Ensure that the payment terms is maintained in the purchasing view in MK02 for the same purchasing organization.
       If its maintained, the same will be displayed in the automatic PO as well. If its not copied, please create a normal PO in ME21N and check whether the payment term is displayed in header - Delivery / Invoice tab.
       If you are in old release, refer the note: 358506 - Auto Service PO Creation - Passing Values into the Function
       If you are using TM system, refer the note: 1897588 - Payment terms not copied from Vendor master to PO
        If the notes are not valid, then you may check for OSS notes or raise an OSS ticket to SAP.
    Regards,
    AKPT

  • Existing DV project (from HDV tapes) need to recapture HDV and master OUT

    here is one nightmare..
    Is there a way to recapture existing DV project (FCP 5.1.4) to HDV ?
    the tapes are HDV - but SOMEONE did not switched the HDV to DV convertor OFF on our deck..
    we need to deliver the master to client..
    thanX for your help

    j3h,
    This could very well be a nightmare if you didn't capture planning to do an online/offline workflow. We do not do this so I am no expert but I can help you search for the right answers. You want to online your DV project. I think that Media Manager can help with this. I caution you, if you did not Log and Capture (ie. you used "Capture Now") then you are in for a large headache. If you used log and capture then you should be able to recapture your media and have media manager replace your DV clips with HDV clips.
    K

  • When make GRN freight need to go freight and clearing account

    Dear expert
    Base price 1000
    EX
    Condition type ZZZZ 3% act on base(this condition type copied from FRA1.
    In PO condition, i need to enter only once ZZZZ value.
    when i do GRN account has to come like
    St Account 1000+
             ZZZZ  30+
    GR/IR cl account 1000-
    Freight clear account  30-
    Please suggest
    Regards
    karan

    Hi,
    You have to enter the freight value in both the std freight condition as well as the Z Condition to meet your requirement as per the above link.  Else system wont post the freight value to separate account.
    Thanks & Regards,

  • Procedure for inwarding imports free sample

    Dear all
    We are getting free samples from our import vendors.No cost involved in this samples.
    We want to keep it in valuated stock.
    Is there any special movement is available for inwarding these free samples.
    Please help us.
    Regards
    Mahalingam Sarathi

    Hi,
    There is no Sperate Movement type for free sample procurement.
    You have maintain Info Record as Free smaple. while creating PO the item will not cover any value.
    During GR you can make against 101.
    SAM

  • Free samples

    I am getting some free samples from vendor of one material which is I am using regularly and material has certain cost in material master.
    I know I can get it by creating PO with free of charge indicator.
    But then when I will receive it and I want to issue it to some project or cost center, system is going to post accounting document even though the material I receive is with zero price.
    Can anybody help to get solution of this problem ?

    hi balaji,
    when u receive the free goods it will come into ur stock with zero value,
    but when u try to issue that material to ur requirements,
    it is valuated at the price u have mentioned in material master records,
    its SAP standard procedure,
    even if it is free goods but also valuated at ur price,
    if u want to treat it as free ( zero value ),
    put zero value at accounting data tab,
    or
    treat it as UNBW material,
    if useful reward accordingly
    lakshmi reddy

  • Import of free samples

    Dear Consultants,
                      my client is getting free samples of one imported material. In this case <b>no payment will be made to vendor</b> but we have to <b>pay all the import</b> <b>duties</b> to the customs like Basic duty of custom, Ecess, Hcess, CVD, ADC , etc etc,
    How we can handle and configure this scenario in sap where we donot make payment to vendor as he has provided us the free goods but we have to make payment of custom duties.
    with regards

    Hi
    Since you are not getting any credit for these duties paid i suggest you release a PO free of cost on vendor & inward the goods.
    One more service PO or cost centre PO for duty, cess etc. . . for customs & pay to customs.
    Regards
    Rang

  • FREE GOODS FROM CUSTOMER N VENDOR

    hi please give me some idea how free goods from customer and free goods from vendors are managed .please give me the process flow.
    thanks n regards
    rn  sap mm

    There is no Particular material type for free goods. You can create free goods po for any material type.
    go to me21n and Input material and all other details same as other po and put tick mark against free items tab and save. as soon as you put tick mark ir Receipt indicator will be deactivated automatically as free item po doenot requires invoice verification.
    You can receipt free goods same as other po. movement type 511 will takes place automatically for free item po
    You can receipt free goods without po also use migo 511 material receipt with free of charge.
    For Customer Free Goods Post the same in SD forum.
    Please Search SDN before Posting into Forums.
    This question is already answered number of times.

  • Can payment terms on AP invoice always defaults from Vendor Master

    Can payment terms on AP invoice always defaults from Vendor Master

    It defaults from vendor master in the purchase order and that carries forward to invoicing. But you can then change the terms in PO and those terms would be effective for subsequent invoicing.
    Just FYI.. master data payment terms in company code segment defaults to FI invoicing, payment terms in purchasing segment defaults to purchasing based invoice (MIRO).
    Hope it helps.
    Thanks.
    Rahul

  • Trying to download free song from my favorite radio station and cant for some reason It worked before?

    Trying to download a free song from my favorite radio station an cant and i have done it before?

    Sorry, I am not sure what you are doing.
    You can only download songs from Apple iTunes Store or sync from computer iTunes music section.

Maybe you are looking for