Free sample is coming automatically at the time of PO creation
Dear all;
At the time of creating PO ,the free sample is automatically been ticked so that we can enter net price .what may be the root cause for that?
Thanking You;
regards;
Joydeep Mukherjee
Hi,
Could you please clarify the "Free Check" mark...Has it been checked already (Default) when you are creating a PO ...or Do you want to Manually Check Mark it...
Please highlight so that necessary answer can be suggested...
Best regards
Amit Bakshi
Similar Messages
-
Batch number coming automatically at the time of Process order release
Hi All,
I want the system generated batch number for header material to come automatically at the time of process order release.
At present ,the batch number is entered manualy dering process order creation.
Can anyone pls guide abt the settings required for the sameDear,
Define the production scheduling profile CORY then
Auto Batch Creation = 2 On release.
Then assign this to your FG or SFG materials in work scheduling view in material msater MM02. Then create new order and check.
Now for automatic generation i have to set internal number asignment for batches.
Batch will create for movement type say 101 SPROLogistics - GeneralBatch mangment--Creation of New Batches --Define Batch Creation for Goods Movements. so it will have same logic in MM for 101 GR against PO will be internal number range but no effect in SD.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Mar 12, 2010 12:40 PM -
IO assigned with Asset,but not coming at the time of PO creation
Hello
IO assigned with Asset,but not coming at the time of PO creation.
I have made following settings:
1 Depreciation - IFRS (INR) 1 0L
15 Income Tax Act 0
20 Depreciation - Indian GAAP (INR) 3 1L
30 Depreciation - IFRS (USD) 0
31 Depreciation - Indian GAAP (USD) 0
In ACSET-Account assignment:
for dep area-20
CAUFN Internal Order * Generic Trans. Type 02 Depreciation Run
KOSTL Cost Center * Generic Trans. Type 02 Depreciation Run
so currently i am using only dep area-20 only(Indian GAAP)
CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
AS01
KO01
AS02
KO22
KO30
so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
kind regardsHey Ajay
thanks for your reply.....
now i'm getting new error:
Parallel depreciation area 31 is not posted
Message no. AA565
Diagnosis
The asset to be posted does not manage parallel depreciation area 31, or
transaction type that you are using is limited to certain depreciation
areas, and does not contain depreciation area 31. This is incorrect.
System Response
Posting is rejected.
Procedure
Check the asset and the transaction type.
I have checked some configuration but not able to debug it.
regards -
I have a problem after I lock my iphone or it is automatically locked , the time doesn't update. It just freezes at the last time of locking. Please help , it is iphone 5 running iOS7.1
I check with my service provider as well as I synchronized with iTunes , changed time manually with the right time zone. Unfortunately the problem keeps showingHi Courcoul
Thanks for stepping by
To tell the truth I forgot to mention that I already did what you said, even more I tried all "reset" options including:
Reset all settings
Erase All content and settings
Reset Network settings
Etc
Even
Reset location and Privacy
It keeps showing the problem -
Every time I open a document on my Apple Mac a copy is saved to My Documents which I don't want. How do I stop the documents being saved automatically all the time??
OS X Lion- About Auto Save and Versions
You cannot disable this. -
my macbook air has gotten slow this past week i have changed browsers and the beach ball keeps coming up all the time and on a game i play it says the network is slow can anyone help me
Go step by step and test.
Restart the router. Restart the computer.
OS X 10.7 Lion / 10.8. Mountain Lion
http://support.apple.com/kb/PH3915
Start up in Safe Mode.
http://support.apple.com/kb/PH4373
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836?viewlocale=en_US
Reset SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Increase Disk Space
http://support.apple.com/kb/PH10677?viewlocale=en_US
Best. -
How do I delete all my contacts and folders to start off new again as they just keep on coming back all the time after deleted?
Is there an email address for better communication as this way I find extremely difficult?check your account settings, possibly under advanced settings.
look for an option to check "remove messages from server" or similar. -
Please help my mac is so slow coming up and going to different places. the flower keeps coming up all the time?????
I'm having this problem but only online. I've confirmed that it is the computer (2007 MacBook), and it only happens when I'm using wi-fi connection. My other MacBook (2010) is connecting with wi-fi fine, and when I plug this MacBook into the ethernet connection it is also doing fine. I've re-started, check the memory, deleted cookies, histories, gone as far as uninstalling and re-installing browswers. Used the System Preferences network diagnostics and got an "all good". Ideas appreciated.
-
Hi,
I want to know how to over write VBBE data after delivery creation if stock blocking is there at the time of SO creation.
That means I want my confirmed delivery quantity to over write the SO quantity in VBBE table after delivery creation. Please help me with your valuable suggestions...
Thanks
TanmoyHi Tanmoy,
This should happen automatically. The VBBE entry should reflect the quantity of the delivery requirement. Is it possible for you to post screenshots illustrating exactly what is happening on your system? -
Manual BOM selection at the time of order creation
Dear Experts,
Could you help me to understand if there is any provision to select BOM by user at the time of order creation without the help of production version.Is there any configuration required to make BOM selected manually.
Regards,
Krishna MohanHi karishna,
Please go to T-code OPL8 and in production version use( 1 )Manual selection of production version. Then user can select manually instead of automatic selection.
Regards
Muhammad Umar -
How to find most cost-effective fwdg agent at the time of shipment creation
Dear Friends,
I have a requirement of realizing the best cost effective transporter(forwarding agent) in the shipment document. Then how to do using the Transportation functionality of the ERP?
There is a scenerio like I want to transport my goods from L to M. In system say i have a route XX for that, which gets automatically determined in the shipment document.
Now on route XX, if i have 5 operative transportors, say A, B, C, D, E.
Transporter A - provides services km-wise, kg-wise, fixed price as well as truck wise
(Say if you opt for km-wise, charges are 15 rs/km, 10 rs/kg, fixed price of 15000 for full truck from A to B)
Transporter B - Similar to Transporter A with different charges
(Say if you opt for km-wise, charges are 18 rs/km, 7 rs/kg, fixed price of 14500 for full truck from A to B)
Similarly other tranporters also have their charges.
and Now at the time of shipment creation, how can i have some standard method, so that the system suggest the most cost effective transportor for my delivery ie. shipment i want to make or probabaly if there is some standard way to get the list of all available transporters on a given route at the time of shipement creation.
Please suggest.
Regards,
Dipti.Hi Sandeepan,
Thanx for ur reply.
As per my requirement, there might be say 100 routes existing into the system and each route might have say 10 different transportors available. Now they want to know 1) the list of transportors available on the given route - (run time at the time of shipment creation) to be put into the forwarding agent field 2) Of the available (say 10 transportors) who will be the best/cheapest.
As per your suggestion, the functionality helps after we put in the fwdg agent and then estimate his associated cost. But as in this case, since there are so many routes (associated so many transportors) they will not know whom to put in the field.
Hence want to know if there is some standard functionality of SAP which might help us i) identifying the list of transportors on a particular route or a given criteria - run-time ii) How to find the best among available OR i) SAP Directly suggesting the one and best transportor available on a given route.
Please help.
Regards,
Dipti. -
Default the opportunity currency at the time of opportunity creation
Hello,
How to default the opportunity currency at the time of opportunity creation. At the time lead conversion it is defaulted according to lead currency but when creating a new lead it is not working fine.
Thanks
SubbuHi CRMWise,
You can use the JoinField Value function for this.
To default it with the user currency, you can pick the currency from User level.
For new record creation you can put the validation ion the default value and check the post default check box so once you save the record it will be automatically defaulted.
For modified record, you can have a workflow with an update action which can again use the Join Field value function, once you will modify the record this workflow will trigger and update the currency field.
Syntx for JoinFieldValue is
JoinFieldValue('<User>',[<OwnerId>],'<EMailAddr>')
Hope you get the point.
Thanks,
Mayank -
Create warning message at the time of order creation
I am looking for a solution :- "Create warning message at the time of order creation/save if a cc is assigned in the settlement rule that crosses the company code of the order or where the company code of the plant for the order is different from the company code assigned to the cc"
The txn code : IW32 (maintenance order) , this warning message for settlement rule creation using Cost center as a settlement receiver. If the used cost center is belongs to some other company code, said warning message should occure.
I tried user exit, field exit, also used std message control (KO-458). Nothing is working. -
At the time of RFQ creation dump error
Dear All,
At the time of RFQ creation one Dump error is coiming... please advise to solve this issue...
the error message is :
Runtime errors SYNTAX_ERROR
Occurred on 09.09.2009 at 12:10:27
Syntax error in program "SAPLV61A ".
What happened?
The following syntax error occurred in the program SAPLV61A :
"Incorrect logical expression: Instead of "X" a field, a function or "("
Error in ABAP application program.
The current ABAP program "SAPLMEVA" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLV61A ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
The following syntax error was found in the program SAPLV61A :
"Incorrect logical expression: Instead of "X" a field, a function or "("
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "ARCHIVAL"
Network address.......... "172.26.2.145"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 80686"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "ARCHIVAL"
Database type............ "MSSQL"
Database name............ "EDP"
Database owner........... "dbo"
Terminal................. "cheeid92corit"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Mar 9 2009 22:54:07"
Created in............... "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version......... "SQL_Server_9.00 "
Patch level.............. "274"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 777
User................ "MMCORE"
Language key........ "E"
Transaction......... "ME47 "
Program............. "SAPLMEVA"
Screen.............. "SAPMM06E 0311"
Screen line......... 54
Information on where terminated
The termination occurred in the ABAP program "SAPLMEVA" in
"ME_LOAD_VARIANTS_PRICING".
The main program was "SAPMM06E ".
The termination occurred in line 55 of the source code of the (Include)
program "LMEVAU08"
of the source code of program "LMEVAU08" (when calling the editor 550).
Source code extract
000250 ENDIF.
000260 *--> Initialisieren
000270 *--> not necessary anymore (Raimond Buchholz)
000280 * CALL FUNCTION 'CUD0_CONFIGURATION_INITIALIZER'.
000290 *--> Preisteile der Varianten besorgen
000300 CALL FUNCTION 'CEI0_GET_CONDITIONS'
000310 EXPORTING
000320 INSTANCE = I_CUOBJ
000330 APPLICATION = 'MM'
000340 TABLES
000350 * CONDITIONS = T_VCKEY. "del 194053
000360 CONDITIONS = T_VCKEY "ins 194053
000370 exceptions "ins 194053
000380 error_message = 01 "ins 194053
000390 others = 02. "ins 194053
000400 *--> Preisteile der Varianten mit Belegnummer versorgen
000410 LOOP AT T_VCKEY.
000420 T_VCKEY-KAPPL = 'M '.
000430 T_VCKEY-VBELN = I_EBELN.
000440 T_VCKEY-POSNR = I_EBELP.
000450 MODIFY T_VCKEY.
000460 ENDLOOP.
000470 ENDIF.
000480
000490 *--> Preisteile der Varianten an Preisfindung übergeben
000500 *- pricing_load_variant_key muß auch bei Positionen ohne Konfiguration
000510 *- laufen, da die Logik im PRICING zu 4.0 umgestellt wurde
000520 IF I_NO_LOAD IS INITIAL.
000530 DATA: I_POSNR LIKE VBAP-POSNR.
000540 I_POSNR = I_EBELP.
CALL FUNCTION 'PRICING_LOAD_VARIANT_KEYS'
000560 EXPORTING
000570 APPLICATION = 'M '
000580 VBELN = I_EBELN
000590 POSNR = I_POSNR
000600 TABLES
000610 TVCKEY = T_VCKEY
000620 EXCEPTIONS
000630 OTHERS = 1.
000640 ENDIF.
000650
000660 ENDFUNCTION.
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY GVP
SY-UCOMM
SY-TITLE Maintain Quotation : Item 00001
SY-MSGTY E SY-MSGID AIPLOC
SY-MSGNO 002 SY-MSGV1 303632
SY-MSGV2 SY-MSGV3
SY-MSGV4
Kind regards
P.AnandhakumarHi Anandhakumar,
Debugg the transaction with help of ABAPER.
System will show you the reason for the above error.
Hope this should solve your problem.
Thanks and regards
Gitesh -
Error at the time of PR creation
I am facing a Error at the time of PR creation:-
Status "Material Inactive" of material 30001668 does not allow external procurement
Message no. ME053
how to active the material.you have a material status in your material master, either at plant level or at general level.
Just remove the status.
Plant level status can be found in almost any plant view,
general level in general data view
Maybe you are looking for
-
How to use a microphone with my iMac?
Hi, I recently purchased a headset to use in Ventrilo for communicating with my clients. I've plugged it into the line in and line out ports on the back. I can hear audio play just fine but when I select "Line In" as the input source in System Prefer
-
I am having some difficulty in getting the UI component of a custom jbo validation rule to work correctly in JDeveloper. What I have so far is a working validation rule. I also have created a Java bean customizer class with a JPanel layout for the co
-
Problem - only 20 pictures in slideshow
I have hundreds of pictures in album. When I click slideshow icon, it will only show twenty pictures. How can I fix this?
-
I recently switched to Aperture. When I opened an image I imported from iPhoto, I don't have an option to edit it. Top of "Adjustments" tab says "image offline". How can I adjust Aperture so I can make adjustment to my iPhoto images?
-
Role of CRM Functional Consultant in ASAP Phases
hii Some body explain me on their real time exeperiance of ASAP phase implementation. in depth?? What will be the major roles and reponsibilities of CRM Functional consultant in all these phase ??? How we should do the AS-IS study in client place ???