Freeflow core Stuck in Processing Request and can't get out of looped state

Javier, We have a problem on our free flow core server. I sent my second test file using one of the saved work flows. The first file sent worked fine using same work flow used on second file. The secong submitted file is stuck inn "processign Request" and I have no way of stopping it.  I logged out and logged back in to see if that would help but that was not helpful. I rebooted the server where free flow core resides,and logged in but the "Processsing request" is still running. I'm assuming since workflows are saved, requests are saved in queue until finalized. Since this instance has not finalized free flow keeps attempting to process any pending requests until complete. Since it is failing to complete this specific request, it  restarts even after a reboot. I need to find out how to clear/cancel this request.

I have gotten in this loop.  When doing this kind of thing, a usb keyboard would be good to have around, and that is probably the problem, because when I would boot, the first time set the windows partition to the default drive.  Hold the key combo and boot into OSX, and go into Settings/Startup Disk/ and change it to The osx hd.

Similar Messages

  • Stuck in recovery mode and can't get out,iPod touch

    IPOD TOUCH SERIAL NUMBER 1C744FT1W4T.
    HI IM STUCK IN RECOVERY MODE AND HAVE TRIED ALL METHODS ADVISE ON THE INTERNET,AS ITUNES NO LONGER SUPPORT THIS OLD IPOD I CANT UPGRADE AND RESTORE. I KEEP GETTING THIS ERROR SAYING ITUNES DOES NOT SUPPORT. PLEASE CAN SOMEONE ADVISE HOW THIS CAN BE FIXED AS IM AT A LOST CAUSE.
    I HAVE TRIED ALL YOUTUBE VIDS AND THEY ALL GIVE THE SAME ADVICE ON HOLDING THE HOME BUTTON AND POWER BUTTON ETC. I EVEN TRIED THIRD PARTY SOFTWARE LIKE TINY UMBRELLA AND IREB AND STILL I HAVE THE SAME LOGO LOCK SCREEN. I DONT MIND LOSING ALL MY MUSIC ON THERE AS I HAVE THAT BACKED U ON HARD DRIVE.
    JUST WANT IT WORKING AGAIN !!!!

    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable           
    - Also, confirm your security software and settings are allowing communication between your device and update servers.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

  • I was fooling around with the "reader" feature on my New iPad. I am now stuck with that and can't get out. Even my four digit code is read out in a machine voice and the iPad wont boot. How do I get out of this. Tried the red arrow slider. shut of the iPa

    I was fooling around with the "reader" feature on my New iPad. I am now stuck with that and can't get out. Even my four digit code is read out in a machine voice and the iPad wont boot. How do I get out of this. Tried the red arrow slider. shut of the iPa

    James,
    I cannot get into Settings! It keeps reading out Slide to Unlock when I try to slide teh arrow to open the fpur digit entry boxes.

  • Stuck in Bootcamp Windows install and can't get out

    late 2009 iMac with Mavericks with homemade fusion drive with super drive removed.
    Was working fine until i tried to use bootcamp to install Windows 7. Now I'm stuck in the Windows partition, windows won't install and can't get out of the loop.  Machine boots white screen with no apple logo and chimes. Eventually has black screen with No bootabe device -- insert boot disk and press any key. I have a USB drive. I've tried everything. Doesn't seem to be recognizing bluetooth keyboard. No sort of button combination on startup works. Tried holding X, command-alt PR, shift, command-R, option. Tried everything. Light doesn't come on on keyboard in startup which means it's probably not recognized. Tried disconnecting internal drives and booting from USB. Tried booting from Time Machine USB drive. Nothings works. Think a USB keyboard would solves this?

    I have gotten in this loop.  When doing this kind of thing, a usb keyboard would be good to have around, and that is probably the problem, because when I would boot, the first time set the windows partition to the default drive.  Hold the key combo and boot into OSX, and go into Settings/Startup Disk/ and change it to The osx hd.

  • Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls

    Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls or call to a new call

    Is there a case on the iphone?
    If so, then remove it and see if that solves it.
    Otherwise, make an appointment at the genius bar.

  • HT201412 The Ipad came up with a notification, and can't get out of it. It's saying: Ipad not backed up. This Ipad hasn't been backed up.Backups happen when this Ipad is plugged in,locked, and connected to Wi-fi. When  I press OK it can't continue. Please

    The Ipad came up with a notification, and can't get out of it. It's saying: Ipad not backed up. This Ipad hasn't been backed up.Backups happen when this Ipad is plugged in,locked, and connected to Wi-fi. When  I press OK it can't continue. Please REPLY

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Help - I am stuck in tge SL installer and can't get out

    After a perfect install on an iMac, I tried to install on a MacBook over Tiger. The installer said there wasn't enough RAM (me bad) and I can't get out. It asked if I want to restore from TM backup - which I don't have. What can I do?

    HI,
    Try booting from the SL install disk and run Disk Utility.
    Shut down the Mac and restart while holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    *(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    *When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.*
    *Select your start up disk and click Restart*
    Check available disk space.
    Control or right click the MacintoshHD icon on your Desktop. Click "Get Info". Under the General tab you will see Capacity and Available. *Make sure there is at least 10% available disk space, 15% is better.*
    Carolyn

  • I tried to update to mavericks which made my MacBook unworkable. I reformatted with my startup disc and now have reloaded my computer from a backup on time capsule. I keep getting a panic screen on start up and can't get out of this perpetual loop?

    I tried to update to mavericks but it crashed my system. I reformatted and restored from time capsule but have a panic screen I can't get out of.

    Read this thread.
    https://discussions.apple.com/message/22935993#22935993
    Linc Davis is a very smart guy on here, and his recommendation in that thread is to reinstall the OS. I'd suggest a backup first.

  • I went into a web sight and can"t get out the screen seems frozen no matter what I do there is no response. Please help?

    I went into a web page I must have left My Ipad in the web sight when I went to use it again the screen seems frozen. Anything I do I can't get a response. Please help

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Osx crashed, then restarted in darwin and can't get out!

    my b/w g3 with tiger has restarted in darwin after it crashed, and i can't get it to restart back into osx. i can log in when it's in darwin mode, but whenever i try to go to a directory it says i don't have permissions (even though i'm the admin and only user profile). i was also able to boot off of a cd, but now able to restart in osx from the startup disc menu. any ideas?

    Hi Jesse - try a start holding down the shift key on the chime. It should boot into Safe mode, but then again .....
    It may take some time b/c it does fsck.

  • I am locked up in a page in iBooks and can't get out

    I am locked up in iBooks, how do I get out.

    Force quit the app by holding down on the sleep button until the slider appears. Let go of the sleep button and hold down on the home button until the app quits.
    Or reset by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, ignore the red slider, let go of the buttons and the iPad should restart.
    Message was edited by: Demo

  • Vollumn icon stuck on the screen and can't get rid of it

    The vollumn icon keeps showing on the screen. I updated the software and turned off the blue tooth. But it still can't be got rid off. When I turned the vollumn down, it would automatically raise to the top vollumn and stuck there. It really bothers me using it now.

    Try a reset. Hold down the sleep and home keys, past when you see the power down slider, and until you see the silver apple. Let it reboot and see if that fixes it.
    It won't hurt your data, just a little clearing of the cobwebs for your device

  • Help, I'm stuck in Freehand, and can't get out!

    I have created a masterpiece :-) brochure cover, with a logo
    over a graphic, with shadow, and gradient fills. It's not a complex
    file, and my overseas client wants it for use with Illustrator.
    However, I can't find a way to get it out and back in to Freehand,
    let alone Illustrator.
    I have converted my text to paths. But the main logo
    disappears altogether (no, it's not linked). The shadow that sits
    on top of an alpha channel area causes that block area to shift
    several pixels.
    Is Freehand able to export effects properly? What is the best
    file format for sharing files with Illustrator?
    Can I crossgrade to Illustrator?
    Geoff

    > I have converted my text to paths. But the main logo
    disappears altogether
    > (no, it's not linked). The shadow that sits on top of an
    alpha channel area
    > causes that block area to shift several pixels.
    >
    > Is Freehand able to export effects properly? What is the
    best file format for
    > sharing files with Illustrator?
    Unfortunately raster effects do not work properly in high
    resolution output due to for example color shift and misalignement.
    Best way is to export as eps or ai and recreate the effects
    in Illustrator. In Illustrator the effects DO work. Illustrator
    also opens pdf files but FreeHand cannot produce quality pdf files.
    Getting files back to FreeHand is not easy. Saving as version
    3 might work. FH cannot open most of the eps file formats.
    > Can I crossgrade to Illustrator?
    Check out the options in Adobe's online store.
    Jukka

  • I'm stuck in my settings app and can't get out, please help!

    It's an iphone 4. It told me to make some more room and in storage and I did but not it won't let me out of the app! I can move around in it but it won't let me get to the home screen or lock it. I've tried holding down the lock button but it doesn't work. I'm freaking out badly, please someone help me!!!

    Hold down the Home and Sleep/Wake buttons for 10-15 seconds or until the screen goes dark. Then, press and hold the power button to power it back up.
    This resets the phone and it should work as expected once it boots back up
    ~Lyssa

  • I'm stuck in a loop and can't get out?

    I'm trying to work on a imovie project but I'm caught in a loop of error messages because imovie is looking for a "...mov" file that it cannot find.  It endlessly goes to two error messages.  One of the messages allow me to select either cancel or search.  search allow me to find the file but won't pull it up and cancel does nothing but start the loop over.  any help?

    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable           
    - Also, confirm your security software and settings are allowing communication between your device and update servers.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

Maybe you are looking for