Freehand Pen tool

Probably a simple problem. But in MX with the pen tool, if
the next point is close (but not on) the last dot it ends the line
and starts a new with the next click. How can I get not to do that?
The distance from the dot that ends the line is three/four mm (!!!)
Any suggestions?

Thanks
The "join non-touching paths" is unchecked. I have gone
through all the settings I can think of and noting seams to change
it. However, drawing with the Opt (I think you mean control-key)
pressed makes a diffrence.
Thanks for the tips.
Jonas

Similar Messages

  • Smart guides and using the pen tool

    This is concerning CS5 15.0.1, on 10.6.4.
    If I am drawing a shape with the pen tool (bézier) and I turn on/off smart guides while at it, the pen tool looses the connection to the last point.
    Who the heck @Adobe thought that would be helpful? Every time I have to reconnect to the last dot.
    Anyone else here noticed that glitch?

    function(){return A.apply(null,[this].concat($A(arguments)))}
    FreeHand could do that some 10 Years ago!
    FreeHand could do that 25 years ago—in fact, even before FreeHand existed. Unlike Illustrator, FreeHand provides three basic point types: Corner, Curve, and Connector. Connector Points ensure tangency between a curved and a straight segment. It's a feature of Fontographer, which was FreeHand's progenitor.
    But that is far from the only basic superiority of FreeHand over Illustrator's hideous Bezier interface.
    JET

  • Pen tool should only affect selected points or segments

    I think that it has already been suggested, but i don't enjoy the pen tool adding segments to unselected anchor points,
    Many times i want to snap a point to other point, not connecting the segments- For instance when colorizing a open lineart or working on a road map.
    I just want to put my new anchor point on top of an unselected anchor point (yes, like in Freehand)
    I know that i could lock objects, but i find the lock/unlock method is cumbersome and slow.
    I think that at least it should be an option in preferences to toggle this behavior (like there's one for "disable auto/add delete", a very similar behavior)

    Re-installing Fireworks seems to have done the trick.
    Just posting this solution for the rare few that may ever have this problem... I have no idea what was wrong, though. I actually couldn't click ANYTHING - the zoom tool didn't work either unless I clicked and dragged.
    Scratch all that, re-installing had no effect whatsoever.
    The problem is with a program I have running, SweetFM that plays music from Last.fm. There seems to be some sort of conflict between it and Fireworks! So yeah... don't run SweetFM while using Fireworks, I guess.

  • Does PSE7 have a "pen" tool?

    I've been using a version of photoshop 6 (don't think it's elements), my brother gave me. Last year I bought PSE7 and wonder if there is a pen tool like in photoshop 6?
    I was using the pen for drawing shapes, almost like freehand, in a way.
    thanks.

    Hi,
    If you are looking for PEN Tool in PSE, here's where you can log an feature request to Adobe -
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    or
    http://www.adobe.com/misc/bugreport.html
    Regards,
    Priyanka

  • Pen Tool Behavior Requesting

    Hi there,
    I don't know if this feature has been requested before, probably a lot of people want it, especially ex Freehand's users like me, it is about the pen tool and the way that it behaves in Freehand and Fireworks, that is showing a 'live' o 'preview' curve from the anchor point before you click on the second anchor point, I haven't see that feature in Illustrator and it would be cool if the next version come with that.
    Thanks

    Yes I have tried resetting the tools I had said in my original post. I have not deleted prefs yet as I am not sure where the one i need to delete are located.
    Adobe photoshop cc 14.2.1
    mac os 10.9.2
    going to the link now to see if it offers some help. thanks.
    Evidently i was reseting the tools inccorectly, I have now properly reset the tools and its working as I orginally remember it working.
    Thank you.

  • Lost bezier handle on closing path with pen tool

    Can any of you please instruct me how to avoid losing the first point’s backwards bezier handle when closing a path with the Pen Tool?
    This is a longtime annoyance for me, but I cannot rule out that I simply have failed to find the proper way of turning off this behaviour.

    I just did!
    See my last post with the picture. I rotated not just the anchor point but the straight line that it was coupled to.
    Steve.
    Steve, you can rotate anchorPoints and adjacent straight segments all day long, and you will still not be replicating the behavior and intent of FreeHand's Connector Points.
    We're not talking about rotating straight segments here. (I would hope that everyone knows you can do that.)
    Forget rotating things. Draw a path with a curved segment and an adjacent diagonal straight segment. The straight segment has no extended handles; only the curved segment does. Now adjust the length of the handle of the anchorPoint that joins to the straight segment in such a way that you cannot break tangency of the curve with the straight segment. In other words, the handle is always constrained to the angle of the adjacent straight segment.
    Don't bother coming back with the workaround of scaling the handle. That still does not ensure tangency.
    Example: This is Fontographer (FreeHand's progenitor). The highlighted point at the bottom of the motorycycle's skid plate is a Corner Point. The segment to the left of it needs to be curved, while maintaining perfect tangency with the straight segment to the right of it. In the inset, the Corner Point has been converted to a Tangent Point, and its handle is being dragged out (all with one selection tool, I might add.) The handle cannot be dragged out at any angle other than that which is tangent to the right segment.
    That's just an example of converting a pre-existing Corner Point to a Connector Point. But now consider ensuring tangency fluidly as you draw with the Pen. In Illustrator, click to place a CornerPoint. Click or clickDrag to place a second anchorPoint oriented at any angle from the first point such that you are guaranteed that the first segment is straight, and that the next segment will be curved and tangent to the first segment. Can you do that in Illustrator?
    While we're at it, note that in FOG, as in FH, you always know what kind of point you are dealing with. Corner Points are displayed as squares, Curve Points as circles, and Connector Points (Tangent Points in FOG) as triangles (regardless of whether their handles are extended or retracted).
    JET

  • LACK OF FULL PEN TOOL FUNCTIONALITY WHEN CREATING A SHAPE LAYER

    Hello, I'm going through Chris Meyer's video course on being an AE apprentice and have spent over an hour on the following issue.
    Here is what I know.
    I know I am trying to create a shape layer, not a mask, to create a frame to surround the video of the green field on the attached screenshot.  Therefore, I pressed "F2" to make sure I am doing so.
    I want to define the borders of this picture frame by using the pen tool to draw a path on the layer entitled "Windy Peak".
    I have highlighted that layer in my timeline.
    This video was pasted on to a placeholder shape that I had created using Command Option "/" on my Mac.
    I do have limited use of the pen tool, because it displays properly when I hover it above the borders of the video to be framed.
    But I lack access to the toolbar controls I want to complete my assignment.
    For example, I would like to create a gradient to define the internal coloration of this frame, but I have no use of the eyedropper when I click on the Color Picker.
    Also, I am unable to access or manipulate any of the standard fill or stroke options for use of my pen.
    This is what I know.  
    Thanks for your help!   Matt
    Message was edited by: Matt Dubuque to add the fact that the video had been pasted on to a placeholder shape image by pressing Command Option "/" on my Mac.

    Thanks for pitching in Todd and Rick, I appreciate it very much.
    As previously stated, I do have use of the pen tool, but it only has limited functionality as demonstrated by the path I created on the green meadow.  My Tools Panel remains activated .
    My core problem remains that I am unable to adjust the fill or stroke settings for my pen.
    I have tried changing and resetting various work spaces and this has not helped.
    I'm scratching my head here.
    Matt

  • Capture with new MBP, plus Pen Tool Question...

    Good Day everyone, I've searched the forums but have not been able to find my answer so I thought I'd post.
    Question 1...
    I've just received my new 17"MBP a few weeks ago. With my old PB, I would connect my camera via FW400 and capture the footage to an external LaCie drive via FW800 out of the computer.
    Now with only one FW port on the MBP, it looks as though I need to capture via FW800 (4pin to 9pin) and go out to the LaCie via USB? Is this correct? How are any of you doing this. It bums me out that I can't go out FW800 to the drive. I suppose there is always the option of getting an Express Card 34 with FW800 connections?
    Question 2...
    Why can I not get my pen tool to work in the timeline? I want to adjust opacity and audio levels but am unable to do this. My old version of FCP (v5) seemed to let me do this. Overlays are 'on'? Any suggestions? I find it easier and faster to be able to do these functions from the timeline, there must be a way?
    FYI...
    New 17" MBP 2.66 w/4GB RAM
    FCP (Studio2)
    I'm sure question 2 is just something stupid that I just haven't set up.
    Appreciate everyone's help as always!
    Rene.

    To be honest, nobody but Apple knows what Apple is thinking but usb is not a good alternative. I also don't know of too many professional post houses or broadcast studios that have anything to do with firewire infrastructure at all. You can get firewire 800 to firewire 400 adapter cables for cheap, search the internet. You can then daisy chain your camera/capture device in line with your storage device.
    The better alternative is to get a express firewire card for your MacBook pro as you mentioned which would create two firewire buses; one for capturing, one for storage. Again, you can search the internet and here's a place to get you started http://eshop.macsales.com/item/Sonnet%20Technology/FW800E34/
    I guess I would have thought maybe some research into a product of the expense of the MacBook Pro would have warranted some research about these things.

  • How can I get the Fireworks pen tool to disengage from an open path shape (and stay disengaged)!

    I am so frustrated! I can't get the fireworks pen tool to disengage when I am finished creating an open path shape (double clicking the end-point isn't working).  The only way I can disengage the pen tool  is to click on a different tool, BUT ...if I do that (i.e., click on a different tool), and then go back to the pen tool (with the intent to create another open path shape), the pen tool automatically engages the last point of my prior open path shape ... and ... no matter what I do, I can't get the pen tool in Fireworks to stop doing this with my open path shapes.
    If anyone has any helpful advice, it would be much appreciated!
    Thank you!
    (note: I prefer not to have to go back and forth creating open path shapes in Illustrator then bring them into Fireworks, but if all else fails, I suppose I'll have to as a work-around.)

    Have you tried holding the Command key and clicking away from the last point? The Command (⌘) key will bring up the Subselection tool; clicking on the canvas with it will allow you to disengage from the path. Once you release the key, the Pen tool will return and you can begin another path.

  • How To Use The Pen Tool in Adobe Illustrator, Photoshop and InDesign CS6 | Creative Suite Podcast: Designers | Adobe TV

    In this episode of the Adobe Creative Suite Podcast Terry White shows how to use the Pen Tool to create Art, Frames and to trace images in Photoshop CS6. If you've never used the Pen Tool before, this is your video!
    http://adobe.ly/STegFg

    With the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?

  • Problem creating vector mask with Pen Tool

    Using Photoshop CS5, Mac OS 10.6.8
    I'm trying to create a simple vector mask using the pen tool to create a curved line at the top and bottom of a photo. Here's what I'm doing:
    1. Create a new layer and select it.
    2. Select Pen tool.
    3. Choose "work path" by selecting button at top menu.
    4. I draw my shape with the pen tool.
    5. Now comes the problem... I can not select this shape, or assign it a color. When I create a clipping mask, it does not recognize my path. When I throw away the layer, the shape is still there in outline only. What am I missing here? I'm familiar with doing this in Illustrator, but I don't understand how it works in PSD.
    I need some help, please.
    Thanks.

    The main thing i use paths for in photoshop is extracting objects from photos.
    Other uses include stroking paths with the paint tools. For example, if you had
    a powerline to remove, one could trace the line with the pen tool and then stroke
    the path with spot healing brush set to content aware fill.
    more info on photoshop paths:
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-73ada.h tml
    MTSTUNER

  • Photoshop CC - Making the Pen Tool on a new layer?

    So I've never had this problem in previous versions of PS. When selecting the Pen Tool and drawing on the document usually leads to it making a new shape layer. However for some reason this option is greyed out in CC. As a workaround I've had to draw a shape box, then draw with the pen tool and delete the shape box afterwards. Is there a reason for this, a bug or something I'm missing?
    Thanks

    It should not be grayed out Pixels are grayed out.

  • How to select a shape from pen tool for paint bucket

    I was under the notion that I could make a shape with the pen tool and if I closed the the shape it would then be selected in a way that would allow me to color the interior with paint bucket.
    However, when I splash the paintbucket inside my shape, it paints the whole layer, not just the part inside my shape.
    Obviously I don't understand how it is supposed to work.
    Apparently I've gone at this the wrong way.. I want to create a freeform shape, that once created will be a selected region in the same way a rectangle or elips would.
    What is the best way to do that?  I'm shooting for thought bubble sort of shape, something along the line of the outline of an egg, but with a tail at one end.

    Added tips from Tip Merchant ($200 consulation fee)
    - on mac - command/ numeric keypad Enter turns the path into a selection. Option delete then fills.
    - an action can be setup to bring up Fill Path from the Path panel menu. Just pressing enter fills with FG color
    These are ways to avoid he paths panel altogether. Best way may be to use the TINY fill path icon in that panel as was pointed out by John

  • Pen Tool Troubles

    I should probably start by saying that I am a novice PS user.  Yesterday I was using the pen tool, for a school assignment, to trace around parts of a picture in order to make a vector illustration.  It was working fine for a while, but now when I click to start a new shape, it immediately closes that shape, and the next click opens another layer.  In other words, instead of being able to draw a line, every click is seen as the start of a new shape, and opens a new layer.  I tried restarting PS, restarting the computer, resetting the tools.  I don't know what to do next.  It's possible that I accidentally clicked on something, somewhere, and changed a setting I should have, but I have no idea what.  Also, it happened within an hour of my trial period ending, and signing up for CC Photography.  Might that have anything to do with it?  Can someone please help me?  Thanks.

    Never mind.  Of course, the minute I make a desperate post is when I finally figure out what the problem is.  Apparently it had something to do with the fact that I was trying to create a new shape while inside an existing group.   Once I selected a folder instead of a layer inside the folder, it started working again.  Why Adobe would design it this way is beyond me, but at least I can continue with my assignment now.  Thanks anyway. :-)

  • Pen Tool and Pathfinder Problems

    Help.....I am trying to follow a tutorial creating a leaf vector image(first time) I use the pen tool to draw the curve in a an elipse shape and then divide in pathfinder but it always adds an extra line when I hit the pathfinder button from the last pointto the first and fills my path instead of remaining as one line that I can remove from the shape...anyone help please.

    This is a link to the tutorial....http://vector.tutsplus.com/tutorials/text-effects/creating-an-environmentally-friendly-gre en-type-treatment/comment-page-5/
    It is part 3, divide.  The image shows what happens after I hit divide in pathfinder, prior to that it is just a single line path with 2 anchor points using pen tool from left to right.  I know its basic but its frustrating as helland I am sure its a simple fix!. Thanks so much for looking

Maybe you are looking for