Freeing memory for Internal Frames when they are closed

Does anyone have any advice for a way to completely free all references to InternalFrames and their contents when they are closed? It appears that many references to the frame are held deep within Swing. Our application hold references to large memory structures in the InternalFrame, which means that we have a large memory leak whenever a frame is closed.

try to remove all listeners added to components which are part of the JIF before you dispose of the JIF.
;o)
V.V.

Similar Messages

Can you use objects as "cut outs" for other objects when they are only bitmaps?

Hi, If this is possible, this would help me a TON.
I am using Flash CS4 professional
I will explain the issue. I have made a tree with a tree trunk and on top of the trunk I have made steps. I am making a Flash Game and you have to go up this steps to continue on the level, while being able to collide with the parts of the tree that aren't the steps. To do this, I would have to cut out the parts on the trunk that are the steps. I have already made the steps. It would take a long time to remake them when the trunk is isolated as a selection and delete the part. If there is a way to just put the already made steps on the bit map and then use it as some kind of cookie cutter-like thing, it would be VERY useful for many things. If something like this exists, or if there is any way to do something like this, PLEASE TELL ME !

For all,
This page has some Jabber info on linking to MSN amnd other service with the Jabber side of iChat (at the top_
http://ralphjohns.co.uk/page5.html
And in the Other Apps section number 11 and 12 point to two apps that can Video only from the Mac to MSN Buddies.
9:16 PM Tuesday; February 26, 2008

Output is proposed for the original invoices when they are cancelled.

Hi,
I noticed an SAP issue related to the output. The output is proposed for the original invoices when they are cancelled.
Issue in detail:
When you cancel an invoice (X) and create the cancellation Invoice document(Y) .The original invoice is determined with the output(1) when you enter the invoice in the change mode . This is happening when the output condition records are set up for the Invoice (X) and when the invoice (X) is not proposed with the Output(1). I am not sure whether this is a Standard SAP issue or issue with the Z output requirements.
Regards
Balachandar

This is not a "standard issue". Output works the way it's configured and according to the condition records and requirements in your own system. Review your output configuration and condition records (VV33).
It is also possible that output is simply proposed any time you enter a document in the change mode. You may apply a requirement to the output type to avoid this. Or just change it to be proposed only once.

Will i have to repurchase games i bought on my iphone for my ipad as they are in a smaller screen when i play them

Will i have to repurchase games i bought on my iphone for my ipad as they are in a smaller screen when i play them.
also isnt game center supposed to save my progress in a game as it is making me begin the games all over again.

Not necessarily.
Some games are "universal", meaning they are for the iPad and iPhone natively.
These are denoted by a "+" on the price/purchase button.
iPhone games will work on the iPad, the screen can be doubled in size.
The graphics aren't as nice looking and text tends to be fuzzy.
No, game center is about badges and finding opponents for games.
Your game progress is saved when you sync with iTunes.

Mac desktop. 10.6.8. Text edit. Not locked. Read and write. Still, documents are locking when they are moved from desktop to another folder on the server. Techies can't figure it out here. What am I not doing?

Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

My ipod 5th gen won't change volume when headphones are plugged in, but when they are not I can change the volume on the speaker. How do I fix this?

My ipod 5th gen won't let me adjust volume when headphones are plugged in, but when they are not I can adjust the volume on the speaker. How do I fix this?

Try a hard reset of the Nano. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
I assume you have double checked to make sure you are plugging the headset all the way in meaning the white part of the headset is flush with the body of the Nano?
B-rock

I've downloaded some free games for my iphone4 but they are using my internet because they have ads. does anyone know if there are any games that don't have these ads and don't require internet AT ALL?and if i disable my internet connexion, does it help?

i've downloaded some free games for my iphone4 but they are using my internet because they have ads. does anyone know if there are any games that don't have these ads and don't require internet AT ALL?and if i disable my internet connexion, does it help?

Thank you. I put it in airplane mode like you suggested, but it looks to me like all the applications and ads are still running. Anyway, I'm just gonna play when I'm really really bored and use them as less as possible. Thank you again for your quick answer.

The some words in perfectly formatted messages I email are merging or joining together likethis or evenlikethis when they are recieved. How do I fix this?

When I send emails that are perfectly formatted they are being somewhat truncated when they are received by whomever I'm sending them to. Words will be joined together throughout the email in combinations of two or three.
I know this is happening because when someone responds to my email, I see the email that I have sent them (in their response email) and it is messed up as described above. I recently asked one of my recipients if this was something that was common with my emails and I was told yes.
Here is an example, cut and pasted from an email sent via Thunderbird: "A number of years ago we were speaking with Stephanie MacDonaldat CIT about our film/video production services. Our Account Exec assigned to your account left a number of months later and we subsequently lost contact.
I just visited your web site and noticed thatyou are using video to help define your services and corporate culture. We'd love to be considered if you are planning any more productions.
One genre of web video thatyou may be interested in is 'Recruiting'.
Companies that wish to attract young, bright talent, arereaching out with fun and engaging videos distributed online and through social marketing. I noticed that you have a Careers page, but no video. Is this something that you could be interestedinat some point?
We recently produced one of these videos for an IT company located in Torontoand I'd be delighted to send you alink if you like..."
The version of Thunderbird I am using is 17.0 and I am running the program on a MacBook Pro with OS X 10.7.5 installed.
Fixing this issue is critical as my emails look very unprofessional and leave a negative impression with my contacts. Please tell me what I can do to fix this.
Best regards,
Derek Shipman

are you pasting text from another source into Thunderbird?
Does it appear correctly in your send folder?

I recently had to get a new computer, my list of audible books is there but can't open because original file cannot be found. how do I find them or redownload them when they are not in my purchased list anymore?

I recently had to purchase a new computer, after doing so I no longer can open my audible books. the list is there, but I get an error message telling me that the original file cannot be found. How can I redownload them when they are not in my purchased list anymore when I go to the Apple Store??

Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.

How to allow user refer back to lecture when they are taking a quiz?

Hi everyone,
I'm new to Captivate and now I am kinda in a dilemma. Thanks for your
time watching my post!
I created a CBL in Captivate 3, the first 10 slides is a lecture and it
is followed by a 10 slides quiz set as SCORM standard.
I want the learner to be able to refer back to the lecture when they
are taking the quiz, I tried to in 2 approaches and they both have
issues in different ways.
Approach 1: "allow backward movement", and "infinite attempts". The
problem with this approach is, when the learner click "review the
quiz" and when they click "back" on the first quiz slide, the whole
quiz will be start all over, the score is flipped back to zero.
Because the quiz seeing this as a new attempt, and the learner is
allowed to make "infinite attempts" as it was configured.
Approach 2: Set "allow backward movement" and allow only "1 attempt".
The problem with this approach is, when the learner is in the middle
of the quiz and refers back to the lecture, the quiz will be
automatically shown as completed. And the learner will not get a
chance to answer those unanswered questions.
So it looks like whenever I let the learner refer back to the lecture
in the middle of a quiz, the quiz will be seen as completed!!! What am
I doing wrong? Is there a better approach that I can "allow backward
movement" and still allow user resume their quiz from where they left
off?
Sorry for the long post, I was not able to express it in a more
concise way.
Any help is really appreciated!!
-David

What you are seeing is the behaviour as-designed in Captivate for quizzing.
Each Captivate movie has a "quiz scope" which begins with the very first scorable object, and ends at the Quiz Results slide. If you enter the quiz scope by starting a quiz slide, then jump back outside the quiz scope, by going back to the main content, Captivate's default behaviour is to freeze the quiz at that point. So when Captivate refers to Allow Backward Movement, it's only talking about backward movement within the quiz scope.
For example, if you get to question 1 but don't answer it and go to question 2, then answer that one, and go back to question 1, you'll still be able to answer question 1. The quiz won't be frozen. However, if you had jumped back to any slide before question 1, your quiz would have been frozen with whatever score you had accumulated at that point.
There may be a workaround you can use to get closer to what you want. Since any scorable object is classified as being part of the quiz, you can add a button on one of the very first slides that the user needs to click in order to advance. Set the properties of this button (or click box) to report a score to the quiz. This makes it part of the quiz scope. Now any content slides that fall after this button slide are also within quiz scope and moving back to them will not have the same effect of freezing the quiz.
Please bear in mind one more aspect of quiz questions: If you answer a quiz question, and then move off the slide (forward or back) that quiz question answer is frozen and cannot be changed unless you Retake the Quiz or relaunch the entire module.
Hope this helps clear up the way things work.

My Macbook is not playing sound unless i have headphones in. The light in the headphone plug stays on even when they are not plugged in. How can i fix this?

My Macbook is not playing sound unless i have headphones in. The light in the headphone port stays on even when they are not plugged in. How can i fix this?

You might need to clean the headphone port (I was in the same situation and this worked for me). Dirt, dust, and debris accumulate in the port and eventually the computer registers the debris as headphones being plugged in. After cleaning the issue was resolved.

[svn] 4901: Only remove the children from the textFlow when they are going to be immediately replaced .

Revision: 4901
Author: [email protected]
Date: 2009-02-09 09:27:39 -0800 (Mon, 09 Feb 2009)
Log Message:
Only remove the children from the textFlow when they are going to be immediately replaced. Side effect from SDK-18880.
QE Notes:
Doc Notes:
Bugs: SDK-19177
Reviewers: Gordon
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18880
http://bugs.adobe.com/jira/browse/SDK-19177
Modified Paths:
flex/sdk/branches/i10/frameworks/projects/flex4/src/mx/graphics/TextGraphic.as

This is a problem of overall design. It is not a scripting issue.
NET USE wil only delete the drive you tell it to delete. You will need to know in advance which drive that is. There is no magic in WIndows. YOu must tel it everything.
Bill suggests GPP which is very easy to use and very flexible. It avoids learning how to write scripts and understand much of Windows. Just set the values and they do allof this for you. There are checkboxes for most issues.
Most of us have not mapped drives since shortly after the release of Vista many years ago. Save your self a lot of headaches and use the tools that were built to do this/
¯\_(ツ)_/¯

Required queries to start services when they are in offline

two node rac
10.2.0.4
windows
asm(to prepare document)
when services went offline to start the services i got below command
To start, stop and manage services
srvctl status service -d dbname
srvctl config service -d dbname
srvctl start service -d dbname -s servicename
srvctl stop service -d dbname -s servicename
Check Oracle Listener on nodes
$ srvctl config listener -n orarac1
orarac1 LISTENER_ORARAC1
$ lsnrctl start LISTENER_ORARAC1
please let me know for other services
to start other services with crsctl and also if any queries can you list out pls one by one
thanks..............you can check the services belwo
D:\oracle\product\10.2.0\crs_home\BIN>crs_stat
NAME=ora.info-iww-com-06.ASM1.asm
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-06
NAME=ora.info-iww-com-06.LISTENER_INFO-IWW-COM-06.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-06
NAME=ora.info-iww-com-06.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-06
NAME=ora.info-iww-com-06.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-06
NAME=ora.info-iww-com-06.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-06
NAME=ora.info-iww-com-07.ASM2.asm
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-07
NAME=ora.info-iww-com-07.LISTENER_INFO-IWW-COM-07.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-07
NAME=ora.info-iww-com-07.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-07
NAME=ora.info-iww-com-07.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-07
NAME=ora.info-iww-com-07.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-07
NAME=ora.osondemand.OSOD.cs
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-06
NAME=ora.osondemand.OSOD.osondemand1.srv
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-06
NAME=ora.osondemand.OSOD.osondemand2.srv
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-07
NAME=ora.osondemand.db
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-06
NAME=ora.osondemand.osod_srv.cs
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-06
NAME=ora.osondemand.osod_srv.osondemand1.srv
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-06
NAME=ora.osondemand.osod_srv.osondemand2.srv
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-07
NAME=ora.osondemand.osondemand1.inst
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-06
NAME=ora.osondemand.osondemand2.inst
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-07
NAME=ora.osondemand.osservice.cs
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-06
NAME=ora.osondemand.osservice.osondemand1.srv
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-06
NAME=ora.osondemand.osservice.osondemand2.srv
TYPE=application
TARGET=ONLINE
STATE=ONLINE on info-iww-com-07

aman before i had services offline
i used some crs_start commands
i am not familar which command for which service i am only familar with few ,which i have listed above
to make document for safe side....................as oracle insited when services are offline please start manually
to start manually i am preparing document
can you please provide each srvctl command and crsctl command to make service online.
just i need is for above services when they come offline to come online what commands to use(srvctl and crsctl)
thanks for help

Bridge CS3 shows different colour on previews when they are selected

LS,
Problem, all of a sudden: Bridge CS3 shows different colours on previews when they are clicked and selected. At first, they are ok, they look the same as they are on camera. When I click an image and select it, it looks like there's a colour profile being applied to it, making the colours dull, its also pulls back the contrast of the image. Can this be corrected in prefences or something? So that the previews are the same as non corrected raw processed files?
David

Oh, good grief… Sorry. I forgot you haven't updated yet. My bad.
In CS3 you'll find the Auto Tone adjustments in the Camera Raw preferences, and the use of high quality in Bridge preferences. You won't have all the options available in CS4.
If you are shooting raw, the upgrade to CS4 just to be able to use ACR 5.3 (and now 5.4) is a no-brainer. Well worth the money.
If you don't upgrade, you'll be leaving a lot of raw image quality on the table, as Jeff Schewe says. ACR 4.6 is light years behind 5.3 and 5.4.
In addition, Bridge 2.x (CS3) is easily the worst piece of software ever released by Adobe or any other major software developer. It should have been fixed for free by Adobe, but shamefully, it wasn't. I would not hesitate to call it an unusable, worthless piece of cr@p. Fortunately Bridge 3.x (CS4) is much better.
However, I repeat: What you are seeing is perfectly normal, expected behavior.
Message was edited by: Ramón G Castañeda

ACL does not correctly order the permissions when they are updated

Outlook Connector sjab32.dll 7.1.228.0 sjms32.dll 7.1.228.0 sjui32.dll 7.1.228.0 sjtp32.dll 7.1.228.0
Problem: We have identifed an issue with editing calendar permissions using the Outlook Connector. Basically the calendar ACEs are evaluated on a first match basic. Outlook Connector does not correctly order the permissions when they are updated. A brief example is below. Editing permissions via UWC works fine and will in fact fix any out of order ACE entries.
Basic calendar permission:
1.aces=@@o^a^rsf^g;@@o^p^rw^g;@@o^c^wdeic^g;@^a^sf^g;@^c^^g;@^p^r^g^
after adding user mab, Ace has now been re-ordered so that the everyone permissions are now before the owner permissions:
2.aces=mab^p^r^g;mab^c^rwd^g;mab^a^rsf^g;@^c^rwd^d;@^c^^g;@^p^r^g;@^a^sf^g;@@o^c^wdeic^g;@@o^p^rw^g;@@o^a^rsf^g
any suggestion as to why this re-ordering is happening when updated through OC and any supporting doucuments for ACL

Hi,
This issue is most likely related to bug #6471869 (Outlook Connector allows invites to users with restricted permissions). This has been fixed in the latest Outlook Connector 7.1_233 (aka 122018-09). I recommend logging a Sun support case to get a copy of this new release.
Regards,
Shane.

Freeing memory for Internal Frames when they are closed

Similar Messages

Maybe you are looking for