Freelance labview developer

freelance developer looking for short term labview projects. based in the uk, 6+ years labview experience including data acquisition and analysis, simulation, experiment control software and image processing. All projects considered.

A little more info about me. In addition to labview experience I have a PhD in chemical physics and 6 years postdoctoral experience in the field of optical spectroscopy, manipulation and diagnostics. I have built and designed many research experiments including and incorporating labview control, acquisition and analysis software. These have included ultra sensitive absorption and Raman spectroscopy instruments and advanced optical tweezer systems to simple undergraduate practical experiments and associated software.

Similar Messages

Required a freelance Labview Developer for a small project for our company preferably from Pune, India, Maharashtra.

Hi This Is Rajesh,
We require a freelance Labview person or company preferablt from Pune Area, for a image grabing and processing project. Please contact with your credintials / resumes or earlier projects on [email protected] if you are interested.
Thanks
Rajesh N,

I completed PG diploma in INDUSTRIAL AUTOMATION AND SYSTEM DESIGN,I trained 6 months in LABVIEW.
I will attach my resume
I hope I will hear from you soon
Attachments:
YASWANTH ANIL D.pdf ‏25 KB

Senior LabVIEW Developer Looking for Moonlight Freelance Opportunities

Hello.
I am looking to assist a company and/or team requiring assistance with National Instruments software development. I have been working in this industry for eight years as a developer and have been managing development team for the past three. I am not looking to change my place of business. I am simply looking to moonlight and make some money on the side (I am trying to follow the Dave Ramsey plan).
Skills:
Requirements / Specification Documents
Requirements Tracibility
Large-Scale Application Development
RT / FPGA
Multi-cRIO
Industrial Sensor Control
Source Code Control and Documentation
Project Management
Please reply to me here if you are interested in my services.
- Resume Available upon Request

Hi,
I am currently seeking a Certified LabVIEW Developer for a Contract Senior LabVIEW Test Developer role with a UK based client we work very closely with.
If you are currently seeking new opportunities and would like to discuss this role further, please send your C.V and a suitable time I could call you to [email protected]
Kind Regards,
Emily Foord

Freelance LabVIEW programmer | Singapore

Good day,
We are seeking freelance LabVIEW programmer
for a functional test software development that involves DMM, DAQ and
DIO etc. If you feel comfortable with the following, please leave your
contact here. We will contact you should you be considered.
Venue: Singapore
Project: FCT SW x1
Software: LabVIEW 7.1 and above
Others: You must be allowed to work in Singapore
You will be required to make yourself available at our office for dedug/ integration, and at site for project commissioning.
Please be informed that only short listed applicant(s) will be contacted.
Thank you very much.
- On behalf of my employer.
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com

Dear Sir,
I am very much interested to have freelance projects related to labview. I also had done 2 free lance projects for University of South Australia in june 2009. I also have conducted 2 workshops on LabVIEW in my university (NEDUET is a license holder of LabVIEW).
The freelance projects are:
• Simulation of Complete Home Automation using LabVIEW – The system is designed to simulate the electronic automated home, designed for the course of Virtual Instrumentation Programming, University of South Australia, June’09
• Efficient Simulation of SCADA system of Unsought Tablets Detection for Pharmaceutical Industries – Extremely perfect and efficient approach to simulate any industrial plant. Two Vis were designed for this simulation, one simulates the server and other simulates the plant, and they both were linked to each other through global communication functions, designed for the course of Virtual Instrumentation Programming, University of South Australia, June’09
The workshops conducted in NED University are:
• Hands-On LabVIEW – A two session workshop organized by IEEE branch NED University of Engineering and Technology, Karachi, Pakistan, 12th and 14th February,2009, Presentation 2. It is available at the following address
http://www.neduet.edu.pk/electronics/electronics/pdf/Labviewlect.htm
• Hands-On National Instruments – A two- session workshop on handling NIPXI-6229, NISCXI-1112,1162 and 1124, Instrumentation Centre, NED University of Engineering and Technology, Karachi, Pakistan, 28th June and 1st July, 2008
• Getting Started with LabVIEW 8.5 – A two-session workshop, NED University of Engineering & Technology, Karachi, Pakistan, 17th and 24th April, 2008, Presentation 1. It is available at the following address
http://www.neduet.edu.pk/electronics/electronics/pdf/Labviewlect.htm
Hasan Baig
Electronic Engineer
NED University of Engineering and Technology
Karachi, Pakistan
Tel: +92 342 250-2808
email: [email protected]

Freelance LabView Programmers where are you?

I am searching for a freelance LabView programmer (in N.Wales / Manchester U.K.) does anyone know of a site that connects projects to freelancers?

Do you need someone locally, or will a telecommuter be appropriate? I find it useful to have contractors working on the other side of the world - you can give them a task at 5pm, and the answer's on you desk (ie: in your email inbox!) by 9am the next day...
cheers,
Christopher
Christopher G. Relf
Certified LabVIEW Developer
[email protected]
International Voicemail & Fax: +61 2 8080 8132
Australian Voicemail & Fax: (02) 8080 8132
EULA
1) This is a private email, and although the views expressed within it may not be purely my own, unless specifically referenced I do not suggest they are necessarily associated with anyone else including, but not limited to, my employer(s).
2) This email has NOT been scanned for virii - attached file
(s), if any, are provided as is. By copying, detaching and/or opening attached files, you agree to indemnify the sender of such responsibility.
3) Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Seeking Labview Developer in Nothern Illinois

LabVIEW Developer
Company: Tecnova
Description
Tecnova is a National Instruments Alliance Member with a growing LabVIEW Department.
Come join our expert team!
We are looking for a self motivated LabVIEW Developer who will own their projects, complete tasks on schedule and on budget while building a relationship with the customer.
Must have broad experience in the following areas:
* Program and document robust LabVIEW applications which include user Interface, database, test sequencing, instrument communication, data acquisition and PID control
* Design and execute software test plans
* Prepare end user documentation and help file content
* Develop automated test, data acquisition, and control systems
* Contribute to multiple projects, and help develop pushing-the-envelope technology
* National Instruments hardware (PXI, cRIO, Field Point, etc.) experience desired
* Contribute to system design and specifications
* Involves extensive customer contact and moderate travel within Chicagoland area
* Must be intelligent, creative, and self-motivated
Requirements
* BS in Computer Sciences, Physical Sciences or Engineering
* 3 years of practical experience in LabVIEW programming
* High comfort level with scientific and technical terminology and the willingness to learn
* Test and measurement experience
* Must be self directed and able to meet objectives as directed
* The ability to effectively work independently in a fast paced environment, with experience adapting to changing requirements and to rapidly absorb new concepts and apply them effectively is essential.
* You must also have good communications skills. Presentation and communication skills, as well as being able to work in a team, are crucial.
Preference will be given to applicants with the following skills:
* Certified LabVIEW Associate Developer (or better)
* National Instruments hardware (PXI, cRIO, Field Point, etc.)
* Communication protocol (RS-232, GPIB, TCP I/P, USB, Bluetooth, etc.)
* Motion control
* Vision control
* PLC (Allen-Bradley, Honeywell, Modicon, Siemens, etc.)
* Schematic capture (OrCAD, AutoCAD, etc.)
* Database connectivity
* Application and instrument driver layers
* Experience with National Instruments PC based DAQ devices
* Experience with various sensors and transducer signal conditioning (microphones, accelerometers, temperature sensors, etc.)
* Actively involved in the LabVIEW community
Additional Requirements:
* Local Candidates Only
* Location: Gurnee, Illinois (Northern Chicago Suburb)
* No 3rd party resumes accepted. Principals only, no agencies or contractors
* Must be a Citizen or Permanent US resident, authorized to work in this country for any employer
* Because of the immediacy of this position, we are unable to sponsor people at this time.
About Tecnova:
Tecnova is a leading electronic product development and engineering firm that provides custom electronic hardware, mechanical, and software solutions. We offer exciting professional challenges, variety, and plenty of opportunity to roll up your sleeves and make a difference. Located far north of Chicago in Gurnee, Illinois, we offer excellent salary/benefit package with 401K. We are looking for innovative, creative, results-oriented people that desire a wide variety of projects in a challenging, fast-paced environment.
For more information about Tecnova see our website at www.tecnova.com.
Contacting Tecnova:
For immediate consideration, please send resumes to [email protected]

I am writing to put myself forward. As you can see from my CV, I have many skills pertinent to this role gained for less than 1 year as a successful Research Assistant. I am having very good knowledge in mathematics.I wish to move into this sector because it is a fast-moving environment and I am also interested in new technology. The skills that I have and believe to be highly relevant to this job and your company which include: Analytical thinking, Self motivated, Fast learner and staying calm under pressure. Additionally, I have undertaken CLAD course and qualified with 80% and believe my unique blend of skills can offer a great deal.I am confident that I possess the attributes you’re looking for and that my experiences gained in Research Assistant would provide invaluable insight and capability to your organization. I would welcome the opportunity to discuss my application in person.
Attachments:
Resume.doc ‏44 KB

LabVIEW Developer Opportunity in San Jose

CTG has been asked to assist our client in staffing a LabVIEW Developer opportunity. This is a 200 hour, short term project on-site in San Jose, CA. This quick job will entail very little new development and will consist primarily of enhancements and modifications to existing code. If you are interested, please forward a copy of your resume (.doc or .txt) to the e-mail address listed below. I will contact you directly upon receipt of that information.
Please note that we can only consider W-2 applicants at this time; no third party, independent or corp-to-corp vendors, please.
Thanks for your consideration!
Regards,
Jessica Owens, Sr. Recruiter
ctg Computer Task Group, Inc
phone: 800-992-5350
[email protected]
www.ctg.com
Backed by 39 years' experience, CTG provides IT staffing, application management, and consulting solutions to help Global 2000 clients focus on their core businesses and use IT as a competitive advantage to excel in their markets. CTG combines in-depth understanding of our clients' businesses with a full range of integrated services, proprietary service methodologies, and a proven track record of delivering solutions that work. More information about CTG is available on the Web at http://www.ctg.com.

Thank you for your interest in CTG; this position is now closed. If you would like to forward a copy of your resume, it will be entered into our database and you will be contacted as appropriate opportunities become available. In the meantime, thanks again and have a great day!
Regards,
Jessica Owens, Sr. Recruiter
ctg Computer Task Group, Inc
phone: 800-992-5350
[email protected]
www.ctg.com
Backed by 39 years' experience, CTG provides IT staffing, application management, and consulting solutions to help Global 2000 clients focus on their core businesses and use IT as a competitive advantage to excel in their markets. CTG combines in-depth understanding of our clients' businesses with a full range of integrated services, proprietary service methodologies, and a proven track record of delivering solutions that work. More information about CTG is available on the Web at http://www.ctg.com.

Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
ErrorCode: -17600,
Failed to load a required step's associated module.
LabVIEW Run-Time Engine version 9.0.1f3.
When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
My TestStand Engine Version is 2012 f1 (5.0.0.262).
I'd appreciate any help on this issue.
Roman

Hi Roman,
There are a couple of things you can try:
1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
Check if the simple VI is loadable and runs without errors in TestStand.
If the step generates the same error, you should try a re-install of the LabVIEW development system.
If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
    Right-click "Build Specifications" and choose "New->Application(EXE)".
    In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
    Save the properties.
    Right-click on the newly created build specification and choose Build.
Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
Regards,
TRJ

How do I determine if a VI is running in the runtime engine or LabView Development Environment?

Is there a function or VI that I can call that will tell me if the program is running in the LabVIEW Runtime Engine or if it is running in the LabVIEW developement Environment? I am using LabView 8.5.
I have a menu item, File/Exit, and I would like to call the Exit LabVIEW vi if running in the runtime engine when that item is selected. However, in development, I don't want to shut down LabVIEW when I select that menu item.
Maybe there is a more appropriate way to exit the program. However, I am looking for something elegant. I'm sure I could find some other way to accomplish the same thing, but I'm looking for a clean way to do it.
Thanks

Here is a small VI with this exact function.
Attachments:
Is EXE.vi ‏9 KB

Labview developer-search for remote work

I have 3 year experience as Labview developer. I have good skils in controling devices using different interfaces and automated tests.
I'm searching for some small projects which can be resolved using remote work. If necessary I can travel several time (in Europe).
Also I can aproach any specific project if initial data & rquirement are very clear defined and is no time presure.
If interresed e-mail to [email protected] .
Thank you!

Hi there,
Sorry but I have already taken on a new contract. If you send me your email address I can pass your request to some people who could help you.
Best regards
Neil
nrp
CLA

Technical competition team needs Labview Developer

The KC Space Pirates are a team in NASAs Beamed power competition.
We are looking into using Labview to automate aiming a high power laser.
I am looking for an experienced Labview developer to help with the project.
There is no pay if we don't win. If we do win the pay will be generous.
So if you are something of a gambler and want some aerospace experience we should talk.
Brian

Mr. Turner,
You have my curiosity. I used to work for United Space Alliance on KSC. My wife and I still live near Cocoa, so I'm not far away. She still works on Cape Canaveral. I have had a good bit of experience with version 7.1 and I have the CLAD certification. I was very close to being ready to test for the CLD certification, but unfortunately, I changed jobs to where I am now and I don't use LabVIEW at work any more. I'm still going to study for and get the CLD since I really like LabVIEW and have a few ideas for a few of my own projects. I have a couple NI PCI DAQ cards I can play around with at home.
Anyway, I'm very curious about your project and am willing to consider joining you.
Thanks,
Brad

Looking for a LabVIEW developer / Test Engineer in Atlanta

Averna at a glance
Averna delivers industry-leading test solutions and services for communications and electronics device makers worldwide, accelerating product development, quality and innovation:
Dynamic: The Averna team thrives on challenges and change, consistently making the prestigious Deloitte Technology Fast 50 list and winning Best in Test and other awards.
Young: The majority of our 300 employees are under 35 years old, and our high-achieving CEO was named to Canada’s Top 40 Under 40.
International: We have offices in Canada, the United States, Mexico, Japan and Hungary, with headquarters in Montreal.
Innovative: We were recently recognized as a Canadian Innovation Leader by the National Research Council Canada (NRC).
Instrumental: Our technology, expertise and drive help our global customers produce market-leading high-tech products in the telecom, transportation, electronics and multimedia sectors.
The challenge of the LabVIEW developer / Test Engineer
As part of the Engineering team, you will be involved in the development and integration of various software programs for validation systems. These systems are renowned for providing fast data throughput and extreme data integrity, while accelerating design cycles and reducing prototyping costs. The Engineering team develops a range of custom data acquisition systems to help our customers obtain accurate measurements and results.
Requirements:
Bachelors degree or college diploma in electrical engineering, software engineering or physics, Masters degree (asset);
3 to 5 years experience in software development with LabVIEW (preferably CLD);
Knowledge of NI TestStand is an asset (Preferably CTD);
Knowledge of video or RF test engineering
Knowledge of FPGA design (either VHDL or LabVIEW FPGA)
Available to travel regularly;
Professionalism, strong communication skills and interpersonal skills;
Team-player, autonomous, self-starter;
Please send your resume to [email protected] and mention the title of the position.

Is this position still opened?

LabVIEW Developer, Full Time, ISRAEL

QualiSystems (www.qualisystems.com) is looking for great people who love LabVIEW. We take pride in our code and by taking LabVIEW to its limits we have a need for only the best in the field. Here are the details:
LabVIEW Developer - Position #4038
Requirements:
4 years (or more) of experience in LabVIEW
Advantages:
Experience in Hardware QA.
Experience in the following fields: Communication, RF, Power, Digital
Experience with C/C++/C#
Experience with Scripting Languages
Experience with Communication Protocols
Experience with Databases
LabVIEW certification
A little bit about the company:
QualiSystems is a pioneer in the field of Functional Test Automation (FTA).
The FTA world is evolving from a collection of various tools to an enterprise quality management platform. QualiSystems' mission is to be the leading software company in the new FTA era.
QualiSystems' TestShell™ unique solutions consist of a suite of integrated applications that enables our customers to test, manage and optimize quality throughout the entire product lifecycle. These solutions enable the creation of complex high quality products, shorten time-to-market and significantly reduce costs. TestShell applications turn the functional testing process into a complete quality optimization solution.
QualiSystems' TestShell is used by leaders in industries ranging from telecommunications, cellular, aerospace and defense, consumer electronics, medical devices and semiconductors.
The company headquarters and expert R&D team are located in Israel. QualiSystems growing global presence includes representatives in Northern and Central Europe and North America.
Please visit our website (www.qualisystems.com) for more information.
Please send your resumes to: careers (at) qualisystems (dot) com

Hello Amiram,
if the position is not yet filled, pm me at coldchemist(at)gmail.com.
Thanks.
... And here's where I keep assorted lengths of wires...

Looking for LabVIEW Developer with 2-3 years of experience for Mumbai based Company

Software Plantation, Mumbai is currently looking for LabVIEW Developer who can contribute to the development of automated test, data acquisition, and control systems using National Instruments LabVIEW.
This position is located at Lokhandwala, Andheri West, Mumbai.
Requirements:
Applicant must meet the following criteria:
2+ years of LabVIEW experience.
Should be from Engineering background.
Knowledge of various communication protocols like RS-232, Modbus, USB, etc.
Knowledge of NI DAQ hardware boards.
Automated test, measurement, data acquisition, and/or control experience.
Good at documentation.
Knowledge of Software Development Cycle
Must be able to meet objectives as directed.
Ability to effectively work independently.
Ability to contribute and work in a team environment.
Ability to adapt to changing requirements, rapidly absorb new concepts, and apply them effectively.
Good communication skills.
CLAD certified developer will be preferred. Knowledge of C/C++, Linux is an added advantage.
If your background and qualifications match this position, please send your resume via email with subject line as: 'LabVIEW Developer Application'.
E-Mail: [email protected]
Note: Please do not post your resume on the job forum. Mail it to the above mentioned email ID.

Kindly send me your resumes on [email protected]

LabVIEW developer seeks short/medium term contract work in UK/EU

Hello All,
I am an ambitious and hardworking LabVIEW developer who is available for short/medium term contract work in the UK/EU. My formal qualifications consist of a bachelors and masters degree in electronic engineering. I am permitted to work without restriction in the UK/EU, and am available from Monday 2008/01/14 onwards.
My previous experience includes two years as a Research and Development Engineer, where I was responsible for the design and implementation of a host of LabVIEW software suites for a flexible DSP based telecommunications test platform.
Following that I experienced two exciting seasons working at the pinnacle of motorsport as a Test and Calibration engineer for a Formula 1 team. My duties included improvement and design of new automated test systems (LabVIEW based) for the on car sensors.
Currently I am in the last week of a contract that is involved in the design and implementation of an automated test system for the semiconductor industry (NDA prevents me from divulging any more information).
My four years of LabVIEW experience, coupled with my strong traditional programming skills and natural logical analysis, and the desire and willingness to put in 110% sets me in good stead to tackle any engineering challenge that I am presented with.
If there are any roles that may prove suitable, I would be very interested in hearing about them. My CV is available on request.
Best regards
Neil
nrp
CLA

Hi Neil,
Hope you are doing well! Is it possible for you to contact me? My email is in my profile.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Freelance labview developer

Similar Messages

Maybe you are looking for