Freelance Labview programmer wanted
Freelance LabView programmer wanted, New Haven Ct area.
Must possess shovel (dig a project out of a hole). Vi reading analog input
from daq board will properly read input voltage when running by itself in
timed loop. It does not read voltage when running in parallel with other
vi's in program. The digital IO's on the same daq board can be written to
with no problem in the same loop.
Bill Lubarsky
If you need some programming help, we have a hundreds of freelance
experts ready to help:
http://www.ifreelance.com/find/providers/browse.aspx?ba=1&c=12
Or, if you are a programmer, please join our site to begin offering
your service to buyers in need of your expertise:
http://www.ifreelance.com
Similar Messages
-
Freelance LabVIEW programmer | Singapore
Good day,
We are seeking freelance LabVIEW programmer
for a functional test software development that involves DMM, DAQ and
DIO etc. If you feel comfortable with the following, please leave your
contact here. We will contact you should you be considered.
Venue: Singapore
Project: FCT SW x1
Software: LabVIEW 7.1 and above
Others: You must be allowed to work in Singapore
You will be required to make yourself available at our office for dedug/ integration, and at site for project commissioning.
Please be informed that only short listed applicant(s) will be contacted.
Thank you very much.
- On behalf of my employer.
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.comDear Sir,
I am very much interested to have freelance projects related to labview. I also had done 2 free lance projects for University of South Australia in june 2009. I also have conducted 2 workshops on LabVIEW in my university (NEDUET is a license holder of LabVIEW).
The freelance projects are:
• Simulation of Complete Home Automation using LabVIEW – The system is designed to simulate the electronic automated home, designed for the course of Virtual Instrumentation Programming, University of South Australia, June’09
• Efficient Simulation of SCADA system of Unsought Tablets Detection for Pharmaceutical Industries – Extremely perfect and efficient approach to simulate any industrial plant. Two Vis were designed for this simulation, one simulates the server and other simulates the plant, and they both were linked to each other through global communication functions, designed for the course of Virtual Instrumentation Programming, University of South Australia, June’09
The workshops conducted in NED University are:
• Hands-On LabVIEW – A two session workshop organized by IEEE branch NED University of Engineering and Technology, Karachi, Pakistan, 12th and 14th February,2009, Presentation 2. It is available at the following address
http://www.neduet.edu.pk/electronics/electronics/pdf/Labviewlect.htm
• Hands-On National Instruments – A two- session workshop on handling NIPXI-6229, NISCXI-1112,1162 and 1124, Instrumentation Centre, NED University of Engineering and Technology, Karachi, Pakistan, 28th June and 1st July, 2008
• Getting Started with LabVIEW 8.5 – A two-session workshop, NED University of Engineering & Technology, Karachi, Pakistan, 17th and 24th April, 2008, Presentation 1. It is available at the following address
http://www.neduet.edu.pk/electronics/electronics/pdf/Labviewlect.htm
Hasan Baig
Electronic Engineer
NED University of Engineering and Technology
Karachi, Pakistan
Tel: +92 342 250-2808
email: [email protected] -
Keen Labview Programmer Wanted
A Keen Labview Programmer is wanted to work in Formula1. I am leaving at the end of October, and the replacement has fallen through.
You must be a competant Labview Programmer, and ideally have knowledge of Data Acquisition, and Control Systems. Ideally an Aerospace or Autosport background.
The Company is Force India F1 Team based in Silverstone UK.
Thanks,
Rob
Solved!
Go to Solution.Please post here: http://forums.ni.com/t5/LabVIEW-Job-Openings/bd-p/JobPost
-
Hi everyone!
I'm here to offer my services to anyone who is in search of a freelance programmer. I'm 24 and currently a 3rd year student in Electrical engineering . I've been programming pretty intensively for almost 4 years now in my current job (part-time for now!). I have a few projects under my belt, many of which are fairly extensive. I have very good knowledge of radiofrequencies, specifically microwave range, ActiveX (COM in general), GPIB instrument control, OOP programming in LabVIEW, etc. etc.
I'm simply offering my help because I enjoy programming in LabVIEW and would like to make a few extra bucks in my spare time working from home (being a full-time student with a job leaves me with only a few hours a week).
My main fields of interest are RF and biomed but I will review any type of project that is offered to me. Hourly rate is very negociable, I'm a student after all!
I'm located in Montréal, Québec, Canada (Oui, ma langue maternelle est le français (québécois )!
Anyone looking for more information can contact me at: [email protected]
Thanks for the interest!
Yohan BelvalThanks for the info!
Sorry for the inconvenience.
Moderator: Please delete thread!
Message Edited by NahoY on 09-24-2007 11:15 AM -
Can a freelance LabVIEW programmer become an Alliance Member?
Looking at the application form it is clear that NI are (understandably) only interested in established companies who will generate lots of hardware sales for them. What about all the talented LabVIEW application and instrument driver developers who work on contract with smaller companies - any exposure for us? These are exactly the kind of people who need a central advertising space but cannot normally fund it themselves.
> Thank you for the question! I'm curious for the official answer of the
> company. I asked the same question at a regional meeting and got a
> "you have got to draw a line somewhere" answer.
> I think a lot of small businesses are interested in a paid
> quality/expert-based mini-alliance membership.
>
This isn't an official answer, but I can tell you what I have seen.
There are individuals that enter into the alliance program. They
typically have expertise in some area that makes them a good integration
choice for engineers using NI products. The key in my opinion is to
gain the confidence of the local sales person and convince them that the
regional users of NI products would be better off if you were doing
integration work with the allianc
e program affiliation. You can also do
integration and not be in the alliance program.
Ultimately, the salesperson wants to see the people they sell products
to be successful in using them. If you have something to add to this
situation, then they will be open to sponsoring you into the program.
If you are looking to get your feet wet and get some experience, what
I'd recommend is approaching an existing alliance member in your area, a
busy one, and let them know that you are interested in free-lance work.
It will let you try things out, see if this sort of work is up your
alley. If things work out, then you have something to approach the
salesperson with.
Greg McKaskle -
Freelance Shockwave3D programmer wanted
We are looking for a freelance or part-time Lingo programmer
(Shockwave3D) for developing several 3D on-line games. Work will be
performed remotely.
We require the following skills: Lingo, 3D development, good
communication skills, creative problem solver, fast learner.
Other preferred skills (not mandatory): Havok, Multi user
Server, ActionScript 2, XML, design aptitude.
For more information please contact:
[email protected]
:cool;If you need some programming help, we have a hundreds of freelance
experts ready to help:
http://www.ifreelance.com/find/providers/browse.aspx?ba=1&c=12
Or, if you are a programmer, please join our site to begin offering
your service to buyers in need of your expertise:
http://www.ifreelance.com -
Project using Labview as a supervisory control system to interface with an OMRON PLC.
Project is in the New York City Area
Send resume [email protected]Good Evening,
You may get more responses if you post this on the Jobs, thread, rather than the thread where folks post that they are looking for jobs. Those that are advertising that they are available may not look back in this thread after they post.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion -
LabVIEW programmer wanted with imaging & sub micron motion control experience
We have a project where we need to align a microscopic image of a prober tip to a mask of known XY coordinates. The image will be acquired with a video microscope with a high resolution digital camera, and the prober will be mounted onto an automated XY theta stage. The mask will have to be scaled to match different magnifications/fields of view, and the stage will automatically align the prober to the mask. Project is located in Eugene, OR. Please contact John, or Gary at 800 706 2284 for further details.
Hi, I'm having a problem with switching of relays using ADAM module 4608. I have 4 relays with me. The vendor supplied commands to open and close relays. But while using serial communication protocol, I can only operate one relay at a time. The problem is there are four different commands to open but only one command to close it all. I couldn't operate all the four relays simultaneously. Program I developed is attached with this message.The commands to open are, #010001,#010002,#010004,#010008 and the close command is #010000.please, can you help me find a solution. I'm really stuck here.
Regards,
arjun
Attachments:
RELAY.JPG 75 KB -
Freelance LabView Programmers where are you?
I am searching for a freelance LabView programmer (in N.Wales / Manchester U.K.) does anyone know of a site that connects projects to freelancers?
Do you need someone locally, or will a telecommuter be appropriate? I find it useful to have contractors working on the other side of the world - you can give them a task at 5pm, and the answer's on you desk (ie: in your email inbox!) by 9am the next day...
cheers,
Christopher
Christopher G. Relf
Certified LabVIEW Developer
[email protected]
International Voicemail & Fax: +61 2 8080 8132
Australian Voicemail & Fax: (02) 8080 8132
EULA
1) This is a private email, and although the views expressed within it may not be purely my own, unless specifically referenced I do not suggest they are necessarily associated with anyone else including, but not limited to, my employer(s).
2) This email has NOT been scanned for virii - attached file
(s), if any, are provided as is. By copying, detaching and/or opening attached files, you agree to indemnify the sender of such responsibility.
3) Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License. -
Wanted LabView Programmer to Work in Formula 1 Team
A Keen Labview Programmer is wanted to work in Formula1. I am leaving at the end of October, and the replacement has fallen through.
You must be a competant Labview Programmer, and ideally have knowledge of Data Acquisition, and Control Systems. Ideally an Aerospace or Autosport background.
The Company is Force India F1 Team based in Silverstone UK.
Thanks,
RobThere has been quite a bit of Interest so here is the job as it appeared on the Autosport website in July.
Just to make it perfectly clear, it is factory based at Silverstone in the UK so don't aply if you like working from home. Salary is dependant on experience, but I am currently on £47K + "potential" bonus.
No Overtime payments, and about 30days holiday a year (which includes public holidays) - two weeks must be taken in the summer during the F1 season shutdown. 8:30am-5:30pm Mon-Fri.
As long as you are eligable to work in the UK I assume you can apply.
You can send you CV direct to me [email protected] and I will gladly forward it on.
Thanks,
Rob
Attachments:
July+2011+Fi+Autosport+Ad.pdf 111 KB -
How to start a second labview programme automatically when first programme is aborted ?
Hi,
I have two independent labview programme. I want to run one programme at first. Second programme should start automatically if first programme is aborted by clicking abort button. Could you please help me in this regard.
ThanksWould it not be better to close the meters when you close the application and have your application exit gracefully rather than having it start another one?
(You can call an executable from within LabVIEW using the System Exec VI but I don't think you need that here)
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets -
I am looking for LabVIEW programmer job.
I am LabVIEW programmer with 6 years experience.
My expertise is optical communication, signal/image processing, C/C++.
I am living at Israel.
T.U in advance
Nadav Chernin
[email protected]It sounds like you have solid experience. Have you considered contract work? The job market kinda sucks right now. Check out net-temps.com and jobcircle.com. Presently I work through a contract house called YOH Scientific, yohscientific.com in Newark, DE. I'm sure they could find you work but they'll skim a lot off the top. I worked with optical comm when I lived in Mass. Too bad it took a dive. I still see a lot of opportunities for RF comm in southern New Jersey. They usually want LabWindows/CVI. Since you know c/c++, LW/cvi would be a cake walk for you.
Parts of California are also looking hot. I just got this from my net-temps search agent:
1. Software Design Engineer
CA Valencia 6 - 9 months
http://www.net-temps.c
om/adcgi/jobref.cgi/jsd/manp126/PR90630_NT_53685XSLN
2. Sr. RF Test Engineer (San Diego)
CA San Diego 0 - 30 days
http://www.net-temps.com/adcgi/jobref.cgi/jsd/volt278/300278-3074-13-72416
3. Lead Test Engineer
CA Torrance 12+ months
http://www.net-temps.com/adcgi/jobref.cgi/jsd/manp126/PR90630_NT_53706XJDC
4. Lead Engineering 3
CA Torrance 180 - 365 days
http://www.net-temps.com/adcgi/jobref.cgi/jsd/volt272/300272-1063-13-72458
Good luck,
- Kevin -
Part time LabVIEW programmer needed
Hi All,
I am looking for a part time LabVIEW programmer to help maintain and enhance
an existing LabVIEW application.
The company is located in Central Florida area - someone local would be most
desireable. The program is fairly complex and interfaces with proprietary
DAQ hardware. If you have less than 2 years of experience, its probably
more than you would want to tackle.
Goto http://www.rgm-isis.com/ to see product info
http://www.rgm-isis.com/prod01.htm here is one of the few screen shots.
If you are interested please respond to [email protected], please don't
respond to the E-Mail that this is posted from.
The web site also has phone numbers and addresses.
Thanks
ChrisChris;
I realize you are looking for a permanent Labview programmer, but you might find the flexibility and cost effectiveness of having a contractor working on a project basis an attractive alternative.
We are a small group of programmers who specialize in, but are definitely not limited to, LabVIEW and DAQ applications. Our model is a little unusual in that we contract through a company in Connecticut, while we are individually located throughout the country (CT, TX, AZ, CA).
Every one of us has a degree in some engineering discipline with varied levels and types of industry experience. We try to match up an engineer(s) to a particular assignment based on their expertise. They also become the point of contact for all contract negotiations.
Generally, we tr
y to complete a project with minimal to no site visits, for two main reasons: it helps us keep the cost of a project down; given the scope of most one-time assignments, it is completely unnecessary. We have enough instrumentation and equipment to test most smaller systems. Granted, we may not own any particular instrument that you happen to be using (we won't have a $30k Tektronix logic analyzer!), but we can make special arrangements as required.
If you are interested and want further information, feel free to contact me at [email protected]
Regards
Eric -
Freelance Director programmer needed
looking for strong freelance Director programmer. growing
Marketing & Communications company
any referrals greatly appreciated, thank you
Marko Peers
Executive Producer
Pacific Media Group
949-936-4845
[email protected]you can send me an email via my website if you want to hire me: www.kglad.com
-
Does anybody can give me a simple example about the labview programme calling dll ?
Does anybody can give me a simple example about the labview programme calling dll ?And the dll is also writed by using labview .I just want to study the process of the labview programme calling dll file.Thank you!
Hi,
Please click on "Find Examples" in the "Getting Started Window"
A window named "NI Example Finder" will pop up.
In this go to "Search" tab
Type "DLLs"
You will see a lot of examples.
If you're online, you'll see user examples too...
Maybe you are looking for
-
User defined field values doesnot show up in summary tab
Hi, I have created my own stylesheet to display some of my user defined field values (associated with organization address book entry type) in the summary tab of the addressbook entry. But Groupwise 8.0 client FAILS to display any of the user defined
-
Cannot fully update or uninstall itunes using windows 7 64 bit OS
Please help!!!!
-
How do I multiply an image and animate it in 3d space to create a shape?
My boss has a small clip he would like me to make. He wants me to take an image (Its just a square image) and have it start in the center of the screen, and as it scales down and moves to one of the bottom corners (I've already got that part done) th
-
ITunes and iPhone won't sync. PLEASE HELP
Hello. So I have this problem. I have the iPhone 5 and it is fully upgraded in all ways. I used to have a MacBook Pro, also all updated with the new iTunes too, where all my music was syncronized. It broke, and I got a new one. We tried to export all
-
Creating multi-colored brushes in PSE 8
OK, I am having a really hard time finding information on this...maybe because it can't be done, who knows. Maybe you all do, I hope! I am very interested in using Photoshop brushes. I have PSE 8 and I have a general understanding of brushes...I k