Freelance LabVIEW Programmer

Hi everyone!
I'm here to offer my services to anyone who is in search of a freelance programmer. I'm 24 and currently a 3rd year student in Electrical engineering . I've been programming pretty intensively for almost 4 years now in my current job (part-time for now!). I have a few projects under my belt, many of which are fairly extensive. I have very good knowledge of radiofrequencies, specifically microwave range, ActiveX (COM in general), GPIB instrument control, OOP programming in LabVIEW, etc. etc.
I'm simply offering my help because I enjoy programming in LabVIEW and would like to make a few extra bucks in my spare time working from home (being a full-time student with a job leaves me with only a few hours a week).
My main fields of interest are RF and biomed but I will review any type of project that is offered to me. Hourly rate is very negociable, I'm a student after all!
I'm located in Montréal, Québec, Canada (Oui, ma langue maternelle est le français (québécois )!
Anyone looking for more information can contact me at: [email protected]
Thanks for the interest!
Yohan Belval

Thanks for the info!
Sorry for the inconvenience.
Moderator: Please delete thread!
Message Edited by NahoY on 09-24-2007 11:15 AM

Similar Messages

Freelance LabVIEW programmer | Singapore

Good day,
We are seeking freelance LabVIEW programmer
for a functional test software development that involves DMM, DAQ and
DIO etc. If you feel comfortable with the following, please leave your
contact here. We will contact you should you be considered.
Venue: Singapore
Project: FCT SW x1
Software: LabVIEW 7.1 and above
Others: You must be allowed to work in Singapore
You will be required to make yourself available at our office for dedug/ integration, and at site for project commissioning.
Please be informed that only short listed applicant(s) will be contacted.
Thank you very much.
- On behalf of my employer.
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com

Dear Sir,
I am very much interested to have freelance projects related to labview. I also had done 2 free lance projects for University of South Australia in june 2009. I also have conducted 2 workshops on LabVIEW in my university (NEDUET is a license holder of LabVIEW).
The freelance projects are:
• Simulation of Complete Home Automation using LabVIEW – The system is designed to simulate the electronic automated home, designed for the course of Virtual Instrumentation Programming, University of South Australia, June’09
• Efficient Simulation of SCADA system of Unsought Tablets Detection for Pharmaceutical Industries – Extremely perfect and efficient approach to simulate any industrial plant. Two Vis were designed for this simulation, one simulates the server and other simulates the plant, and they both were linked to each other through global communication functions, designed for the course of Virtual Instrumentation Programming, University of South Australia, June’09
The workshops conducted in NED University are:
• Hands-On LabVIEW – A two session workshop organized by IEEE branch NED University of Engineering and Technology, Karachi, Pakistan, 12th and 14th February,2009, Presentation 2. It is available at the following address
http://www.neduet.edu.pk/electronics/electronics/pdf/Labviewlect.htm
• Hands-On National Instruments – A two- session workshop on handling NIPXI-6229, NISCXI-1112,1162 and 1124, Instrumentation Centre, NED University of Engineering and Technology, Karachi, Pakistan, 28th June and 1st July, 2008
• Getting Started with LabVIEW 8.5 – A two-session workshop, NED University of Engineering & Technology, Karachi, Pakistan, 17th and 24th April, 2008, Presentation 1. It is available at the following address
http://www.neduet.edu.pk/electronics/electronics/pdf/Labviewlect.htm
Hasan Baig
Electronic Engineer
NED University of Engineering and Technology
Karachi, Pakistan
Tel: +92 342 250-2808
email: [email protected]

Freelance Labview programmer wanted

Freelance LabView programmer wanted, New Haven Ct area.
Must possess shovel (dig a project out of a hole). Vi reading analog input
from daq board will properly read input voltage when running by itself in
timed loop. It does not read voltage when running in parallel with other
vi's in program. The digital IO's on the same daq board can be written to
with no problem in the same loop.
Bill Lubarsky

If you need some programming help, we have a hundreds of freelance
experts ready to help:
http://www.ifreelance.com/find/providers/browse.aspx?ba=1&c=12
Or, if you are a programmer, please join our site to begin offering
your service to buyers in need of your expertise:
http://www.ifreelance.com

Can a freelance LabVIEW programmer become an Alliance Member?

Looking at the application form it is clear that NI are (understandably) only interested in established companies who will generate lots of hardware sales for them. What about all the talented LabVIEW application and instrument driver developers who work on contract with smaller companies - any exposure for us? These are exactly the kind of people who need a central advertising space but cannot normally fund it themselves.

> Thank you for the question! I'm curious for the official answer of the
> company. I asked the same question at a regional meeting and got a
> "you have got to draw a line somewhere" answer.
> I think a lot of small businesses are interested in a paid
> quality/expert-based mini-alliance membership.
>
This isn't an official answer, but I can tell you what I have seen.
There are individuals that enter into the alliance program. They
typically have expertise in some area that makes them a good integration
choice for engineers using NI products. The key in my opinion is to
gain the confidence of the local sales person and convince them that the
regional users of NI products would be better off if you were doing
integration work with the allianc
e program affiliation. You can also do
integration and not be in the alliance program.
Ultimately, the salesperson wants to see the people they sell products
to be successful in using them. If you have something to add to this
situation, then they will be open to sponsoring you into the program.
If you are looking to get your feet wet and get some experience, what
I'd recommend is approaching an existing alliance member in your area, a
busy one, and let them know that you are interested in free-lance work.
It will let you try things out, see if this sort of work is up your
alley. If things work out, then you have something to approach the
salesperson with.
Greg McKaskle

Freelance LabView Programmers where are you?

I am searching for a freelance LabView programmer (in N.Wales / Manchester U.K.) does anyone know of a site that connects projects to freelancers?

Do you need someone locally, or will a telecommuter be appropriate? I find it useful to have contractors working on the other side of the world - you can give them a task at 5pm, and the answer's on you desk (ie: in your email inbox!) by 9am the next day...
cheers,
Christopher
Christopher G. Relf
Certified LabVIEW Developer
[email protected]
International Voicemail & Fax: +61 2 8080 8132
Australian Voicemail & Fax: (02) 8080 8132
EULA
1) This is a private email, and although the views expressed within it may not be purely my own, unless specifically referenced I do not suggest they are necessarily associated with anyone else including, but not limited to, my employer(s).
2) This email has NOT been scanned for virii - attached file
(s), if any, are provided as is. By copying, detaching and/or opening attached files, you agree to indemnify the sender of such responsibility.
3) Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

LabVIEW Programmer Full Time Position, Livonia, Michigan - Join are team of programmers

LabVIEW Programmer POSITION
Revolutionary Engineering, Inc. is dynamometer testing systems integrator and services company. We provide systems and services for the automotive industry as well as in-house dynamometer testing. We currently have a position open for a LabVIEW Programmer. A brief description of the positions responsibilities and benefits are summarized below. If you are interested please e-mail me at [email protected]
Position Available
Full Time LabVIEW Programmer
Requirements
Bachelors Degree
LABVIEW programming experience, CLD a plus
AutoCAD Experience a plus
Experience with Microsoft Office Software
Ability to work with other technicians, engineers, and customers
Ability to communicate technical information both verbal and written
Responsibilities Include (but not limited too)
LabVIEW Programming
Control System programming and interfacing
Design and build assistance on dynamometer systems
Electrical and mechanical print review
Benefits
Paid Vacations
Full Medical
Paid Sick Days
Competitive Salaries
Please check out our website at www.revoleng.com
regards,
Daniel E. White
Revolutionary Engineering, Inc
36865 Schoolcraft Rd
Livonia, MI48150

Dear Sir,
I learnt about your need for LabVIEW Programmer from your company’s website. I am interested in this job profile which is mentioned in your website. Moreover I aspire to work in a technical company of my field.
I believe that my LabVIEW knowledge and my education background are appropriate for your requirement , I am attaching my resume for your consideration.
Thanks in advance.
Regards,
Devi S.
Programmer analyst trainee,
Cognizant technology solutions,
Chennai.
PH: 91-09789069507
Attachments:
Devi_Sadasivam.doc ‏48 KB

LabVIEW programmer needed for full time position, Orange County CA

Anaheim CA 92801
[email protected]
Job Title: Project Manager
Job Type: Permanent
Job Location: Anaheim CA
Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)
Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
40 hrs/wk at our Orange County facility.
What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
Salary Offered: $60K-80K based on experience and qualifications
The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com
Attachments:
ETU and Staff.jpg ‏186 KB

Bill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim

LabVIEW programmer for Sound Measurement & Analysis software

Listen, Inc. is the market leader in PC based electro-acoustic test and measurement systems for testing loudspeakers, microphones, telephones, audio electronics, hearing aids and other transducers. We have been in business for over 10 years and our continued growth has created an opportunity for a LabVIEW programmer to join our programming team.
This position reports to the Software Manager. Duties include, but are not limited to:
• Designing and coding new Sound Measurement and Analysis software
• Improving, reviewing and de-bugging existing code
• Preparing internal and user technical documentation
• Testing code
• Interfacing with management, sales teams and customers to define tasks
Required skills / education
• Strong background (3+ years) in large-scale LabVIEW programming
• Bachelor’s degree (Masters preferred) in engineering, computer science or similar subject
• A methodical, user interface-intensive approach to coding, testing and documentation
• Competency in Visual Studio, .NET and database programs is an advantage
• The ability to work to tight deadlines
• The ability to work well in a small team. A willingness to challenge and discuss your own and other people’s ideas.
• Previous experience or an interest in acoustics or sound and vibration engineering is an advantage.
• Minimum 2+ years in a similar technical position (5+ years preferred).
Listen is a small, dynamic, and growing company, located in Boston’s historic South End. We offer all the benefits of a small company, combined with the security and stability of a software company that has been in business for over 10 years and sells to most of the world’s major loudspeaker manufacturers. Our customer list includes many of the world’s major loudspeaker and telecommunications manufacturers. Please visit our website, www.Listeninc.com, for more information about our products and markets.
Benefits include a competitive salary, healthcare, paid vacation and a retirement plan.
Applicants must have authorization to work in the US. We are unable to assist with visa / work permit applications.
To be considered for this position, please send resumé and cover letter explaining why you are the ideal candidate for this job (in Word or PDF format only) to [email protected]. Please use the subject title Labview Programmer Position (NI Board).

Are you open to consultants? I'm currently in Northern NJ and I could work on-site in Boston, MA 3 days a week / 30-35 hrs a week. I have a BSEE, I'm a US Citizen with an Active Secret Clearance. I have over 10 years of experience with LabVIEW and 5 years of experience with TestStand. I'm also very comfortable working with Test and Measurements Instruments.

Looking for a UK based Labview programmer, short term, contract or full time, depending on what suits. Immediate start, Signal Processing skills ideal.

We are a UK South-West based LabVIEW consultancy company looking for a LabVIEW programmer preferably with advanced signal analysis and processing skills, to become part of the team or work as a short term contractor. We will be looking to advance their skills through a range of different projects that we work on, from aerospace test and measurement, through to shop floor data collection and User Interface marketing.
Must have at least two years experience in LabVIEW and have an electronic engineering based degree or be able to show signal analysis is an area of expertise. We are looking to fill the position as soon as possible.
Please your CV’s to the below address.
[email protected]

If the candidate had all the correct attributes then it could indeed be an option.
Regards
Peter

How to start a second labview programme automatically when first programme is aborted ?

Hi,
I have two independent labview programme. I want to run one programme at first. Second programme should start automatically if first programme is aborted by clicking abort button. Could you please help me in this regard.
Thanks

Would it not be better to close the meters when you close the application and have your application exit gracefully rather than having it start another one?
(You can call an executable from within LabVIEW using the System Exec VI but I don't think you need that here)
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

LabVIEW Programmer – Enable Integration

Enable Integration (a division of Enable Training and Consulting, Inc.) is seeking a LabVIEW programmer to join our integration team and immediately be a core part of several projects. Today, we are a team of 20 employees and have a diverse range of clients: Bosch-Rexroth, FIRST Robotics, University of Waterloo, LEGO Education, National Instruments, and Solid Works.
We are a dynamic employer with a flexible working environment and atmosphere. Our integration team specializes in consulting and providing custom hardware and software solutions for test, measurement & automation applications for worldwide clients in a variety of industries. Our team has over 65 years combined programming experience and have worked on projects both large and small, and have recently been recognized as a National Instruments Alliance Partner with exceptional technical resources at NIWeek 2013. Please visit www.enabletc.com for more information about the company.
Duties & Responsibilities:
We are looking for a self-motivated LabVIEW programmer who will excel in a fast-paced consulting environment, will excel to meet deadlines and ensure the success of our customers. We are looking for someone who has recent experience developing application using LabVIEW.
Your primary efforts will encompass all stages of software engineering application design, including:
Requirement definition and gathering, Specification writing
Systems Design & Architecture
Algorithm development
Documentation (Code and Project Management)
Unit, Functional, Validation & Verification Test
Deployment & Application Support
This is a full-time position and candidates will be expected to work out of our Milton, Ontario head office.
Desired Skills & Experience
4-year technical degree, or 3-year technical diploma from accredited colleges or universities
Experience programming hardware and/or software applications using LabVIEW
CLAD/CLD/CLA certifications are an asset
Discipline and organization with respect to software maintenance and version management
Experience with source code control & source configuration management tools a plus (TortoiseSVN ideal, however will consider applicants with working knowledge of Perforce, ClearCase etc.)
Strong troubleshooting and debugging skills
Understanding of basic signals and systems concepts
Sensors and actuators
Analog and digital signals
Data acquisition concepts and hardware
Communication protocols
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
Self-motivated team player
Effective time management
Strong written skills in English
Code documentation, Project management & Progress Reports
Team communication/updates
Immediately eligible to work in Canada at time of application
Pay is commensurate with skills and qualifications of the applicant.

Kindly specify the email address to apply to for the mentioned job

LabVIEW Programmers needed in Detroit

Greening is looking for multiple LabVIEW programmers with some experience. Below is our job description. You can contact me directly at [email protected]
LabVIEW Developer / Design Engineer
Job Description
The LabVIEW developers at Greening work in a cross functional team environment under multiple Certified LabVIEW Architects that guide and train the developers. Developers spend the majority of their time programming Test and Automation applications in LabVIEW™. Developers also participate in the system design including the selection of sensors and data acquisition hardware. Developers are required to travel for the commissioning or startup of their projects.
The successful candidate will be a motivated fast learner as this is a fast paced and growing group. Developers will be tutored through the National Instruments certifications for LabVIEW. This is an ideal position for a programmer or engineer that is seeking to become an expert LabVIEW programmer.
Education Preferences: BSEE, BSCE, or BSME
Experience in the any of the following technologies is helpful:
Hardware: National Instruments PC Based DAQ, FieldPoint, PXI, IOTech DAQ, Embedded Controls, Industrial Computers, sensors, and wiring
Software: LabVIEW, TestStand, Visual Basic, CAD programs (AutoCAD, TurboCAD)
Integration: Data Collection, Motion Control, Real-Time Embedded Systems, Machine Vision, Industrial Automation, Distributed Control Systems, Database Design, SCADA Systems, Sensor Selection, Signal Wiring Methods

Dear Sir/Madam,
This is in reference to your mail regarding job vacancy at your esteemed organization. This kind of opportunity, which I am eagerly waiting for. I am very confident that I can prove my excellence if I get an opportunity in your organization. Being an enthusiastic engineer, I look forward to working with your organization, where in I undertake to put my abilities, skill set and experience as an input and the growth of my career and company name and profits as my output.
I have a sound and 4+ years of constant exposure towards Software Development in LabVIEW and TestStand.
I am a Masters graduate in Electrical Engineering and I am Certified LabVIEW Associate Developer (CLAD). Expertise programming with hardware interfaces like VISA, GPIB, PXI, USB...etc and I offer myself with flexibility in working and relocation is not a constraint for me.
Presently I located in Germany and working with National Instruments selective Partner company. I am very much enthusiastic to relocate to USA.
My resume is available upon request. Please mail me at [email protected] I will be at your convenience.
Thanking you Sir/Madam,
With Kind Regards,
Sashidher Gundogi

Labview Programmer Job Opening - Santa Clara, CA

Software
Engineer/LabView Programmer
OptiMedica
is looking for an experienced Software Engineer/LabVIEW Programmer to support
the development and production of its expanding line of innovative ophthalmic
instruments. Candidate must be familiar with LabView programming and Software
best practices, be familiar with medical device environment and its
regulations, and have the ability to quickly solve challenging problems. Candidate will function as a key software architect
for complex medical systems.
Strong skills and
experience with LabVIEW programming for FPGA, LabVIEW applications, and higher
level applications on Windows operating systems are required in order to develop
automated test, measurement, data acquisition, and control systems. Must be able to work with limited
guidance/supervision and be able to test, evaluate, document, qualify and
release designs for complex projects involving medical laser equipment in a
focused, highly collaborative multidisciplinary environment.
Skills/Experience
Requirements:
o
Highly
developed problem solving, communication and collaborative skills.
o
At
least five years experience developing automated test, measurement, data acquisition,
and control systems using LabVIEW. Experience
developing OEM products a plus.
o
At
least five years experience working with product development team to transfer new
products into production for commercial sale.
o
Key
participation in the test and integration of successfully shipped medical
products is strongly preferred.
o
Successful
track record delivering innovative software solutions to complex problems.
o    Familiar with
Electrical Safety, EMC/EMI Qualification Testing & Design Requirements for
Medical Equipment.
o
Fast
and eager at learning and applying new technology.
o
Familiarity
and experience with verification and validation phases for medical device
software.
o    Knowledge, experience
and understanding of software development standards.
o
Experience
with lasers, optics, motion control, and image processing.
o
Experience
with National Instruments hardware (especially FPGA); experience with a variety
of programmable instruments a plus.
o
Experience
using structured, specification driven, requirements-based approach to software
design and development.
o    Must be well
organized and enjoy working in a dynamic environment.
o    Facility with Qt, MATLAB and C++ beneficial.
Responsibilities:
o
Design,
develop, qualify, implement and release designs for FDA-approved medical laser
equipment using LabVIEW.
o
Support
R&D, Production, and Field Service of FDA-approved medical products in the form of
automated tests and control systems using LabVIEW.
o
Participate
in design review and hazard/risk analysis meetings.
o
Create
test procedures to verify the safe and proper software operation of FDA-approved
medical products.
o
Pursue
continuing education and certifications, including NI Certified LabVIEW
Developer and Architect.
o
Work
in a team environment with other engineers (of varied disciplines) as well as executives
and manufacturing personnel to sustain existing products and deliver new
products to market.
o
Apply
software principles and concepts to evaluate new designs for function and
performance. System integration of new
components and designs into high performance optical and opto-mechanical systems
and sub-systems.
o
Collect/
review data and communicate both status and recommendation on technical issues
by preparing technical reports and presentations.
o
Initiate,
execute & review product changes via OptiMedica’s ECO process.
o
Provide
continuous support for manufacturing and resolve complex manufacturing issues.
o
Develop
test methods, system test procedures and create test and qualification reports
for new product introduction.
o
Reports
to Director of Product Development.
Education Requirements:
o
Bachelor’s
degree in Computer Science, Electrical Engineering or equivalent strongly
preferred.
Site Location/Contact
Information:
o
Santa
Clara, California
Note:
Candidates must be legally authorized to work in the United States.
NOTE: This job description is not intended to be
all-inclusive. Employee may perform
other related duties as negotiated to meet the ongoing needs of the
organization.
Contact:
Debbie Goedicke - 650-585-6784
[email protected]

Labview Programmer

Experienced Labview Programmer Needing Job in US

Hello,
My name is Rollin, I have been working in for a European research facility in
Grenoble, France as an Electronics Engineering Technician for 8 years.
I have 3 years Hands on experience with Labview, for instrument control and
data acquisition through serial, Hpib and Daqcards. I' m in Atlanta, but I will
relocate anywhere in the US If someone hires me. I have enclosed my resume here
after.
Thank you for your time and consideration.
INSTRUMENTATION LABVIEW SPECIALIST
Mr. Rollin S. McCarty
4941 Central Drive, Apt. 705,
Stone Mountain, Georgia 30083
Phone: 770-413-4092
E-mail: [email protected]
PROFILE
Broad knowledge of control systems, electronics and instrumentation.
Labview Programming Expert (3 years hands on experience).
Excellent Documentation skills.
Bilingual French-English. US Citizen.
DETAILS
Hardware:
Design, development, installation and maintenance of PC based automation
solutions used in the fields of data acquisition, motion, process and
instrument control. Includes analog & digital circuit design, use of
electronics CAD simulation tool (SPICE), together with general purpose
electronic test equipment.
Software:
Design, development of Labview software, including low level instrument drivers
- using serial and HPIB protocols, plus various I/O analog and digital
interfaces - data processing and program logic, as well as menu driven user
friendly GUI.
Documentation:
Production of comprehensive yet attractive and understandable documentation.
HTML skills. MSOffice.
EXPERIENCE
European Synchrotron Radiation Facility, FRANCE
Computer & Electronics Engineering Specialist,
1991- 1999
Provided scientific research institute survey team using a large variety of
state of the art survey equipment with turn-key automation solutions, leading
to an increase in quality as well as in quantity of the production.
Caterpillar, FRANCE
Mechanical Methods Specialist,
1989- 1991
Training and support of fifteen mechanical computer draftsmen for their
corporate CAD tool. Provided manufacturing shop information regarding new
technologies.
Caterpillar, FRANCE
Electrical & Mechanical Technician,
1988- 1989
Preventive and break down maintenance of bulldozer girder welding robots and
associated machinery.
EDUCATION
Cuefa & Learn. Tree, France - Java bases & Networking, 80 hour training, 1999.
Esrf, Grenoble, France - Labview, 40 hour training, 1996.
French equiv. to AS/BS, Grenoble, France - Computer Programming, 1992.
French equiv. to AS/BS, Grenoble, France - Electronics, 1988.

You probably already have a job, since this was posted in 1999.. But if you don't, we are looking for a labview programmer at Brown University in Providence, RI. It is a part-time position for data acquisition/analysis. we study sensory processing in the brain.. let me know if you are interested: [email protected]

Houston LabView Programmer needed

Houston, Tx LabView Programmer needed.
We are looking for a Labview experience programmer in the. Please contact for more details. (713) 333-0227

There is a special forum for this kind of posts: http://forums.ni.com/ni/board?board.id=JobPost
Thanks!
LabVIEW Champion . Do more with less code and in less time .

Freelance LabVIEW Programmer

Similar Messages

Maybe you are looking for