Freelance LabVIEW Programmers (Singapore Only)
Hi,
I am currently looking out for Freelance LabVIEW Programmers who are able to work on a part-time basis.
The various works that may be required from time to time are:
1) Existing Program Upgrading and Improvements review
2) LabVIEW projects with NI hardware (may include interfacing with external protocols)
3) GUI re-architecture
4) etc...
If you are located in Singapore and are interested in such opportunities, please email your resume or experience to [email protected]
Thanks for viewing.
Best Regards,
Ken
hi Iam in Malaysia Iam intersted in your part time job IAm CLAD certified contct me
E-mail: [email protected]
Tel:0112911876
Regards
Similar Messages
-
Freelance LabVIEW programmer | Singapore
Good day,
We are seeking freelance LabVIEW programmer
for a functional test software development that involves DMM, DAQ and
DIO etc. If you feel comfortable with the following, please leave your
contact here. We will contact you should you be considered.
Venue: Singapore
Project: FCT SW x1
Software: LabVIEW 7.1 and above
Others: You must be allowed to work in Singapore
You will be required to make yourself available at our office for dedug/ integration, and at site for project commissioning.
Please be informed that only short listed applicant(s) will be contacted.
Thank you very much.
- On behalf of my employer.
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.comDear Sir,
I am very much interested to have freelance projects related to labview. I also had done 2 free lance projects for University of South Australia in june 2009. I also have conducted 2 workshops on LabVIEW in my university (NEDUET is a license holder of LabVIEW).
The freelance projects are:
• Simulation of Complete Home Automation using LabVIEW – The system is designed to simulate the electronic automated home, designed for the course of Virtual Instrumentation Programming, University of South Australia, June’09
• Efficient Simulation of SCADA system of Unsought Tablets Detection for Pharmaceutical Industries – Extremely perfect and efficient approach to simulate any industrial plant. Two Vis were designed for this simulation, one simulates the server and other simulates the plant, and they both were linked to each other through global communication functions, designed for the course of Virtual Instrumentation Programming, University of South Australia, June’09
The workshops conducted in NED University are:
• Hands-On LabVIEW – A two session workshop organized by IEEE branch NED University of Engineering and Technology, Karachi, Pakistan, 12th and 14th February,2009, Presentation 2. It is available at the following address
http://www.neduet.edu.pk/electronics/electronics/pdf/Labviewlect.htm
• Hands-On National Instruments – A two- session workshop on handling NIPXI-6229, NISCXI-1112,1162 and 1124, Instrumentation Centre, NED University of Engineering and Technology, Karachi, Pakistan, 28th June and 1st July, 2008
• Getting Started with LabVIEW 8.5 – A two-session workshop, NED University of Engineering & Technology, Karachi, Pakistan, 17th and 24th April, 2008, Presentation 1. It is available at the following address
http://www.neduet.edu.pk/electronics/electronics/pdf/Labviewlect.htm
Hasan Baig
Electronic Engineer
NED University of Engineering and Technology
Karachi, Pakistan
Tel: +92 342 250-2808
email: [email protected] -
Freelance LabView Programmers where are you?
I am searching for a freelance LabView programmer (in N.Wales / Manchester U.K.) does anyone know of a site that connects projects to freelancers?
Do you need someone locally, or will a telecommuter be appropriate? I find it useful to have contractors working on the other side of the world - you can give them a task at 5pm, and the answer's on you desk (ie: in your email inbox!) by 9am the next day...
cheers,
Christopher
Christopher G. Relf
Certified LabVIEW Developer
[email protected]
International Voicemail & Fax: +61 2 8080 8132
Australian Voicemail & Fax: (02) 8080 8132
EULA
1) This is a private email, and although the views expressed within it may not be purely my own, unless specifically referenced I do not suggest they are necessarily associated with anyone else including, but not limited to, my employer(s).
2) This email has NOT been scanned for virii - attached file
(s), if any, are provided as is. By copying, detaching and/or opening attached files, you agree to indemnify the sender of such responsibility.
3) Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License. -
Do labVIEW programmers get any RESPECT where YOU work?
I'm starting to get irked at the comments from C and even VB users who think LabVIEW is... well I'm not sure WHAT they think it is -- schematic capture for programmers?. For example, the other day in a meeting, I told the crew that I had to change part of my code to accommodate a hardware change. The C programmer looked over and said "So, you have to draw some pictures?". In another meeting, I recall another C programmer proclaiming to the entire audience that "LabVIEW is basically good for talking to hardware, and making fancy buttons."
So many of them think that LabVIEW is just a GUI for NI cards. When I tell them that 90% of my apps don't even use NI hardware, their eyes just glaze over. I honestly think some of them believe there's an LabVIEW "Icon" for every specific programming task. If that's the case, can someone tell me where the VI "Make Valves Actuate Automatically With Incoming Sample And Check The Solution Temperature Before Running The Cleaning Cycle And Apply More Heat If It's Not Hot Enough With PID Control Unless The Omron Controller Is Not Set To PID" is located?
What irks me the most is, it seems the people who have NO exposure to LabVIEW are the people that have the strongest opinions about it. Sure, I know they are defending their platform. And I know it's my job to defend LabVIEW when they bring up these comments. But I'm tired. So... tired.
Oh, and back to my question, Do labVIEW programmers get any RESPECT where YOU work? If they do, let's do lunch. I work for peanuts.Message Edited by Broken Arrow on 06-24-2005 02:33 PM
RichardRespect will derive from the quality and reliability of the work you produce, not the systems you use to produce them!
The same is true for them of course.
The people I most respect at work are those who are well grounded in their area of expertise, systematic and methodical in their approach, grow their skill base, flexible in their solutions, document well and organise religiously.
They almost always seem to be the most softly spoken in meetings, listening more than speaking and the most successful wherever they choose to exercise their talents.
Selection of a particular system for your solutions may considerably aide you in producing higher quality and higher reliability solutions in a more timely fashion, that are also lower cost over the life cycle of the solution!
In considering the issue that you raise; remember that software solutions, which is actually what you are about, relate to basic constructs such as: -
A black box approach using: -
Sequences
Selections
Iterations
These should be based on a requirements analysis document and synthesised into a software specification document using a standard methodology.... I bet they have never seen either and probably couldn't manage some Axiomatic Set Theory....
I would suggest that a strongly typed development methodology such as that encouraged by Labview, results in more reliable solutions more frequently than weakly typed approaches such as C. (Ask them about memory pointer management, type casting issues, memory de allocation and buffer overruns.... ohm yes and of course DLL hell..... that will keep em quiet)
Do I consider my self a Labview programmer?
Not so much as I consider myself a solutions architect -
That is, I will use the most appropriate tool for the problem from an armoury of skills, Labview just happens to be one of my favourites.
Well, it doesn't matter what you use to arrive at the solution, it's the quality of the solution that counts!
Good luck wherever you choose to exercise your talents.
P.S. At the moment I constitute one of the majority of Labview users.... I am the only one at our location.
I don't know how much respect I have; but I do enjoy what I do and those I choose to do it with.
As I anticipate doing it for a long time yet, I look forward to many more years enjoying myself thoroughly!Message Edited by Conseils on 06-24-2005 10:31 PM -
Looking for freelance Captivate programmers - LA/OC area
Urgent need! Looking for freelance Captivate programmers - LA/OC area - For development of e-learning programs for Large Corporations. Please contact me if you have the skill set and are in the area. Thank you
Hi I am interested in this. I am an Adobe Certified Instructor based in London and I have been training and using Captivate since it was made by Macromedia. You can find some samples of my work on my website here and my email address is [email protected]
I hope to here from you soon
Mark Waterfield -
Hi This Is Rajesh,
We require a freelance Labview person or company preferablt from Pune Area, for a image grabing and processing project. Please contact with your credintials / resumes or earlier projects on [email protected] if you are interested.
Thanks
Rajesh N,I completed PG diploma in INDUSTRIAL AUTOMATION AND SYSTEM DESIGN,I trained 6 months in LABVIEW.
I will attach my resume
I hope I will hear from you soon
Attachments:
YASWANTH ANIL D.pdf 25 KB -
Freelance Labview programmer wanted
Freelance LabView programmer wanted, New Haven Ct area.
Must possess shovel (dig a project out of a hole). Vi reading analog input
from daq board will properly read input voltage when running by itself in
timed loop. It does not read voltage when running in parallel with other
vi's in program. The digital IO's on the same daq board can be written to
with no problem in the same loop.
Bill LubarskyIf you need some programming help, we have a hundreds of freelance
experts ready to help:
http://www.ifreelance.com/find/providers/browse.aspx?ba=1&c=12
Or, if you are a programmer, please join our site to begin offering
your service to buyers in need of your expertise:
http://www.ifreelance.com -
Looking for freelance Captivate programmers
We are looking to build relationships with freelance captivate programmers. We are in Irvine, CA and are developing eLearning for large corporate clients. Most of our work is in Flash, but we have had a few client requests to use Capitivate. Any one out there interested in talking?
Hi I am interested in this. I am an Adobe Certified Instructor based in London and I have been training and using Captivate since it was made by Macromedia. You can find some samples of my work on my website here and my email address is [email protected]
I hope to here from you soon
Mark Waterfield -
Finding Experienced Labview Programmers
I have repeatedly run into the same problem with labview development, a lack of experienced programmers. Over the last several years I have seen an unreal growth is the market for labview applications but it doesnt appear that the developer community is keeping up with this demand. Where can I find Labview programmers to fill this demand. The job postings outnumber the seekers and there are many great positions unfilled. What a crazy thing. I find labview programming is very fulfilling and a great career. Are there any Experienced programmers looking for jobs or is this a lost cause?
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGAAre you offering a job?
Based on what I've seen over the past 13 years, there seems to be a number of reasons for this:
Market share. Let's face it: LabVIEW isn't as widely used as other, more traditional languages. There was an article I had seen a while ago that compared the market share of LabVIEW vs other programming languages. Let's just say that LabVIEW aficionados needed to turn away.
Most placement firms simply don't know about the language, so they (a) don't know who's working with it, and (b) don't know about the job offerings, so they can't tie the possibilities to the ones looking for work. I can't tell you the number of times I've talked to recruiters who've called me and when I told them I used LabVIEW their response is "Lab-what?".
Another is simply that LabVIEW programming requires a different mindset, so it's not readily taught in schools. Not taught = no graduates who know the language = no potential workers. Why isn't it taught in schools? Well, that can start a whole debate, and I'm not going there.
Yet another reason, it seems to me, is that LabVIEW isn't as flexible in terms of the kinds of programs you can write. I say this not to disparage LabVIEW, or start a flame war, but simply as a realistic assessment based purely on my own experience. There's just some stuff that you cannot do in LabVIEW, but can easily do in C/VB/C#/Java/whatever. Heck, I recently coded up a large .NET app in C# that would have been impossible in LabVIEW.
Money. And by this I mean how much people are paid. LabVIEW jobs tend to start as test engineer jobs, which are nowhere near as highly paid as a C or C/database programmer. There are exceptions, obviously.
Corollary to (2) and (5): Sometimes LabVIEW jobs are found in test engineer positions on job boards, as opposed to "programming" jobs. This sometimes makes it difficult to find jobs.
Is it a lost cause? Hardly. Have you gotten no responses posting on the LabVIEW openings board here? -
LabVIEW Freelancer - Programmer/Tutor - Singapore based - CLA
Hello * ,
Open for short/long term LabVIEW project.
Familiar with NI PXI (Digital/Analog/Serial IO/PMU etc). PXI modules analysis and comparison based on project requirement .
Familiar with NI LabVIEW & MS Visual Studio.NET programming.
Available as a freelancer.
Singapore based.
For any query please feel free to contact me at drawsomecode (at) gmail.com
With project requirement in mind/paper will be great.
Thanks for reading this post.
Regards,
DrawsomeHi,
Students are welcome to email me at [email protected] for help or enquiry on LabVIEW tutor / FYP oriented tutoring / FYP project.
Drawsome -
Hi everyone!
I'm here to offer my services to anyone who is in search of a freelance programmer. I'm 24 and currently a 3rd year student in Electrical engineering . I've been programming pretty intensively for almost 4 years now in my current job (part-time for now!). I have a few projects under my belt, many of which are fairly extensive. I have very good knowledge of radiofrequencies, specifically microwave range, ActiveX (COM in general), GPIB instrument control, OOP programming in LabVIEW, etc. etc.
I'm simply offering my help because I enjoy programming in LabVIEW and would like to make a few extra bucks in my spare time working from home (being a full-time student with a job leaves me with only a few hours a week).
My main fields of interest are RF and biomed but I will review any type of project that is offered to me. Hourly rate is very negociable, I'm a student after all!
I'm located in Montréal, Québec, Canada (Oui, ma langue maternelle est le français (québécois )!
Anyone looking for more information can contact me at: [email protected]
Thanks for the interest!
Yohan BelvalThanks for the info!
Sorry for the inconvenience.
Moderator: Please delete thread!
Message Edited by NahoY on 09-24-2007 11:15 AM -
It was a question that was brought up during lab class and no one had an answer for. Any ideas?
Solved!
Go to Solution.I call it the wagon wheel effect.
In old westerns, whenever a wagon with a big spoked wheel would ride by the camera, sometimes the wheel would look like it is slowly rolling forward, sometimes slowly rolling backwards, sometimes it would look like it was at a standstill.
It is a function of the frame rate of the camera vs. the cycle period of the spokes of the wheel. If one spoke (or more) moved exactly the right distance between one frame of the movie and the next, it would look like the wheel hadn't moved at all. If it moved a little further than the rotation distance of one spoke, it would look like it is slowly rolling forward. If the wagon is a bit slower, then it would move less than the distance of one spoke and it would look like the wheel is rolling backwards.
Same thing with having a periodic waveform (each hump of the sine wave is a spoke of the wheel), and a # of samples and data acquistion rate equal to an integer number of that period (basically the frame rate of the camera.) The wagon wheel is always rolling forward. The sine wave is always oscillating. But depending on the acquisition rate vs. the sine wave frequency gives different appearance to how that sine wave looks on the graph.
Experiment and give it a 9.9 Hz sine wave, you'll see it appears to move backwards.
So my guess (and it is only a guess) is that whoever designed the express VI gave it a default of 10.1 Hz to help visually simulate on the graph the motion of the sinewave.
It really doesn't matter what they picked as the default as it is up to you as the LabVIEW programmer to change that default setting (either in the express VI or wiring in a value) to something that makes sense for your application. -
Thanks in advance for your help.
I'm confused by your question. Are you talking about hardware drivers (NI-DQ, NI-GPIB) or instrument drivers? You should be able to use current hardware drivers with older version of LabVIEW and you can (in most cases) use older hardware drivers with new versions of LabVIEW. For instrument drivers, NI only maintains LabVIEW 6 and 7 versions on it's Instrument Driver Network but I'm pretty sure maintains an archive of older versions if they exist. If you have a specific instrument driver that you need, make a request on this forum. NI might be able to provide an older version or someone can save it to a previous version. One or two probably won't be a problem but numerous requests might be a little out of line. At some point, you might want to consider a
n upgrade. There have been numerous improvements since 5.1 and upgrading is usually not a major problem. -
Can a freelance LabVIEW programmer become an Alliance Member?
Looking at the application form it is clear that NI are (understandably) only interested in established companies who will generate lots of hardware sales for them. What about all the talented LabVIEW application and instrument driver developers who work on contract with smaller companies - any exposure for us? These are exactly the kind of people who need a central advertising space but cannot normally fund it themselves.
> Thank you for the question! I'm curious for the official answer of the
> company. I asked the same question at a regional meeting and got a
> "you have got to draw a line somewhere" answer.
> I think a lot of small businesses are interested in a paid
> quality/expert-based mini-alliance membership.
>
This isn't an official answer, but I can tell you what I have seen.
There are individuals that enter into the alliance program. They
typically have expertise in some area that makes them a good integration
choice for engineers using NI products. The key in my opinion is to
gain the confidence of the local sales person and convince them that the
regional users of NI products would be better off if you were doing
integration work with the allianc
e program affiliation. You can also do
integration and not be in the alliance program.
Ultimately, the salesperson wants to see the people they sell products
to be successful in using them. If you have something to add to this
situation, then they will be open to sponsoring you into the program.
If you are looking to get your feet wet and get some experience, what
I'd recommend is approaching an existing alliance member in your area, a
busy one, and let them know that you are interested in free-lance work.
It will let you try things out, see if this sort of work is up your
alley. If things work out, then you have something to approach the
salesperson with.
Greg McKaskle -
freelance developer looking for short term labview projects. based in the uk, 6+ years labview experience including data acquisition and analysis, simulation, experiment control software and image processing. All projects considered.
A little more info about me. In addition to labview experience I have a PhD in chemical physics and 6 years postdoctoral experience in the field of optical spectroscopy, manipulation and diagnostics. I have built and designed many research experiments including and incorporating labview control, acquisition and analysis software. These have included ultra sensitive absorption and Raman spectroscopy instruments and advanced optical tweezer systems to simple undergraduate practical experiments and associated software.
Maybe you are looking for
-
Cannot connect to WPA network with non-ascii password
In my office somebody thought it would be a good idea to encrypt the wireless network with a WPA password containing a non-ascii character. It is fine by the WPA2 standards, but the airport password prompt doesn't allow me to introduce suche characte
-
Cloning of a LINUX with MAXDB problem
Hello all, We cloned (copied) a complete Linux server (AAA) with SAP using MAXDB, target server was ZZZ. The copy was very successful, nothing missed. Edited the profile parameters and changed all ENVironment variables changing anything from AAA to Z
-
i have an ipod touch 3rd gen , it is currently running ios 4.2 and i am trying to upgrade to a newer version, when i do a software update it doesnt show me any updates???
-
Interval Since Last Panic Report: 24987 sec Panics Since Last Report: 3 Anonymous UUID: 28E34CCF-E71D-459F-87C7-0418F6F6C921 Sun Jul 8 17:30:06 2012 panic(cpu 7 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f824892
-
It's not letting me compose a letter
It will not allow me to go back to the inbox and will not allow me to compose a letter