Freely Programed Help for select-option field
Hi,
how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
Please suggest where i am doing wrong??
Edited by: kranthi kumar on Dec 29, 2010 6:19 PM
>
kranthi kumar wrote:
> Hi,
>
> how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
>
> i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
>
> i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
>
> View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
>
> Please suggest where i am doing wrong??
>
> Edited by: kranthi kumar on Dec 29, 2010 6:19 PM
Hi Kranthi,
Please help me to understand your design.
Why would you like to create a Freely programmed value help for select-option?. why not use wdr_select_option directly ?
Similar Messages
-
Value help for select-option not filling selection field
I'm having some problems with a value help on a select-option. I've managed to get the value help displaying the correct values but for some reason can't get it to populate the selection field after I've selected a record.
I have the following call:
wd_this->m_handler->add_selection_field(
i_id = 'SHORT_D'
i_description = 'Program'
it_result = lt_range_table
i_read_only = read_only
i_value_help_type = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_SEARCHHELP
i_value_help_id = 'ZPROGSTUDY' ).
where ZPROGSTUDY is a new search help I've set up with an exit to retrieve the values.
Any ideas ? Thanks.Hi Malcolm,
The code you have is OK. I copied your code into a test program and it worked as expected.
I used a search help where the possible values are populated in the search help exit, exactly as in your case. The only time it did not work was when read_only = X, but that is obvious also from a visual point of view since the input field is greyed out in that case. The popup also tells you is in RO mode...
Does your SHLP work when you test it from SE11? Returns values?
SAP provides a lot of WD4A sample code, see for example component WDR_TEST_SELECT_OPTIONS look for
select-option fields > special cases > input helps > Non field-specific input help using search help
Regards,
George -
How to get calender in f4 help for select options in module pool (URGENT)
Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amrutaHi Amruta,
First of all, you can not create select-options directly in module pool.
For creating <b>select-option is dialog prog</b> follow these steps:
1. create your selection screen model as subscreen by:
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
PARAMETRS: P_MATNR LIKE MARA-MATNR.
SELECT-OPTIONS: S_BISMAT FOR MARA-BISMAT.
SELECTION-SCREEN END OF SCREEN 2000.
2. create a screen ( example 100 ) in your module-pool dedicated for selection-screen. on this screen layout sketch a sub-screen name like subscree_2000.
3. write this bit of code in PBO and PAI of the screen 100;
CALL SUBSCREEN SUBSCREEN_2000.
4. include this code in PBO:
INCLUDING SY-REPID '2000'
6. write user_command of PAI, call screen which is going to executable after selection-screen.
5. create a transcation for this dialog module pool with screen 100.
6. execute this transaction and you can see it's behaving like cool with select-options.
After that in [bprocee on value-request]</b>, use F4_DATE for both from and to option field.
Hope it will solve the problem.
Regards
Krishnendu -
Problem on Search Help for select-option
Hi,
Iam working on a search help for select-option,
is there a way to incorporate select-all or multiple
selection on this?
Thanks!Hi catherine,
1. Just copy paste this program.
(It will POPULATE the SELECT-OPTION,
based upon
MULTIPLE Selection,
selected by the user,
in the help provided thru F4IF_INT_TABLE_VALUE_REQUEST.)
2. Eg. is for BUKRS (company code)
3.
REPORT ABC.
TABLES : T001.
DATA : ITAB LIKE TABLE OF T001 WITH HEADER LINE.
DATA : RETURN LIKE TABLE OF DDSHRETVAL WITH HEADER LINE.
SELECT-OPTIONS : BUKRS FOR T001-BUKRS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-LOW.
PERFORM MYPOPULATE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-HIGH.
PERFORM MYPOPULATE.
FORM MYPOPULATE.
REFRESH ITAB.
SELECT * FROM T001 INTO TABLE ITAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BUKRS'
dynprofield = 'BUKRS'
dynpprog = sy-REPID
dynpnr = sy-dynnr
multiple_choice = 'X'
value_org = 'S'
TABLES
value_tab = ITAB
return_tab = return.
IF RETURN[] IS NOT INITIAL.
REFRESH BUKRS.
CLEAR BUKRS.
LOOP AT RETURN.
BUKRS-SIGN = 'I'.
BUKRS-OPTION = 'EQ'.
BUKRS-LOW = RETURN-FIELDVAL.
BUKRS-HIGH = RETURN-FIELDVAL.
APPEND BUKRS.
ENDLOOP.
ENDIF.
ENDFORM.
regards,
amit m. -
Can i assign a collective srch help for select option in list display
can i assign a collective srch help for select option in list display
Hi,
Yes ,u can assign a collective search help for select-option in list display.
Eg:
Define your select option like this
SELECT-OPTIONS: s_vbeln FOR likp-vbeln MATCHCODE OBJECT vmva.
Regards,
Shiva. -
F4 help for select options based on parameter value
hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PMhi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM -
Add custom field in the F4 help for selecting source field in tcode FMDER
HI,
I an working in FUND MANAGEMENT, i want to add custom field in the F4 help for selecting source field in t-code FMDERIVE.
How this possible.
Regards,
PankajOK
-
F4 Help for select-options.
Hi Experts,
I need to use F4 help for a select - options field from a particular table.I have written the below code and it worked well.
FORM sub_show_help.
SELECT bukrs
FROM zfica_accurate
INTO TABLE gt_accurate.
delete ADJACENT DUPLICATES FROM gt_accurate.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BUKRS'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_CMCODE'
window_title = 'COMPANY CODE'
value_org = 'S'
multiple_choice = 'X'
TABLES
value_tab = gt_accurate
return_tab = gt_return.
s_cmcode-sign = 'I'.
s_cmcode-option = 'EQ'.
LOOP AT gt_return INTO gw_return .
s_cmcode-low = gw_return-fieldval.
APPEND s_cmcode.
ENDLOOP.
READ TABLE s_cmcode INDEX 1.
IF sy-subrc = 0.
gw_dynpread-fieldname = text-018.
gw_dynpread-fieldvalue = s_cmcode-low.
APPEND gw_dynpread TO gt_dynpread.
UPDATE THE SCREEN FIELD VALUES
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
ENDIF.
IF sy-subrc <> 0.
MESSAGE i003.
ENDIF.
The problem is , I need to create a new type for s_cmcode(select-option ) field with the same structure as the select-option and the code is as below. I have created an internal table gt_sfield similar to s_cmcode . I have replaced s_cmcode with gt_sfield but the below code is not working. Its the same as the above program but its not showing up the values in the field.Could anyone please help me.
fORM SUB_SHOW_HELP.
SELECT BUKRS
FROM ZFICA_ACCURATE
INTO TABLE GT_ACCURATE.
gt_sfield[] = s_cmcode[].
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'BUKRS'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
WINDOW_TITLE = 'COMPANY CODE'
VALUE_ORG = 'S'
MULTIPLE_CHOICE = 'X'
TABLES
VALUE_TAB = GT_ACCURATE
RETURN_TAB = GT_RETURN.
LOOP AT GT_RETURN INTO gw_return.
gw_sfield-SIGN = 'I'.
gw_sfield-OPTION = 'EQ'.
MOve gw_return-fieldval to gw_sfield-low.
APPEND gw_sfield to gt_sfield.
ENDLOOP.
READ TABLE gt_sfield INDEX 1 INTO gw_sfield .
IF SY-SUBRC = 0.
gw_dynpread-fieldname = 'S_CMCODE'.
move gw_sfield-low to gw_dynpread-fieldvalue.
APPEND GW_DYNPREAD TO GT_DYNPREAD.
UPDATE THE SCREEN FIELD VALUES
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
DYNAME = SY-REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = GT_DYNPREAD
EXCEPTIONS
INVALID_ABAPWORKAREA = 1
INVALID_DYNPROFIELD = 2
INVALID_DYNPRONAME = 3
INVALID_DYNPRONUMMER = 4
INVALID_REQUEST = 5
NO_FIELDDESCRIPTION = 6
UNDEFIND_ERROR = 7
OTHERS = 8.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE I003.
ENDIF.
ENDFORM.Hi,
The fucntion module 'DYNP_VALUES_UPDATE' should be used only for updating the screen field values. In your case you are updating the internal table using this function module.
Thanks
Pavan -
Search help for selection screen field
Hi ,
steps for creating search help for a key field in selection screen..
tables is a userdefined from which the field is taken..
thxs,
vindhi,
c this.
REPORT ZXYZ_0002 .
data: dynfields type table of dynpread with header line.
data: return type table of ddshretval with header line.
selection-screen begin of block b1 with frame title text-001 .
selection-screen begin of line.
PARAMETERS: P_BUKRS type T001-BUKRS.
selection-screen comment 30(20) BUTXT for field p_bukrs.
selection-screen end of line.
selection-screen end of block b1.
at selection-screen output.
if butxt is initial.
select single butxt into butxt
from t001
where bukrs = p_bukrs.
endif.
at selection-screen on value-request for p_bukrs.
call function 'F4IF_FIELD_VALUE_REQUEST'
exporting
tabname = 'T001'
fieldname = 'BUKRS'
dynpprog = sy-cprog
dynpnr = sy-dynnr
dynprofield = 'P_BUKRS'
tables
return_tab = return
exceptions
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
others = 5.
read table return with key fieldname = 'P_BUKRS'.
Add it back to the dynpro.
dynfields-fieldname = return-retfield.
dynfields-fieldvalue = return-fieldval.
append dynfields.
Get the company code from db and add to dynpro
data: xt001 type t001.
clear xt001.
select single * into xt001
from t001
where bukrs = return-fieldval.
dynfields-fieldname = 'BUTXT'.
dynfields-fieldvalue = xt001-butxt.
append dynfields.
Update the dynpro values.
call function 'DYNP_VALUES_UPDATE'
exporting
dyname = sy-cprog
dynumb = sy-dynnr
tables
dynpfields = dynfields
exceptions
others = 8.
start-of-selection.
rgsds
anver
if hlped mark points -
Authorization check for select-options field - Company code.
Hi experts,
i have company code field on the report selection screen and i have to validate the authorization check for BUKRS.
How to do authorization check for a select-options field?
Any function modules used to write the authorization check for a SELECT-OPTIONS FIELD?
Thanks.>
RNB wrote:
> Any function modules used to write the authorization check for a SELECT-OPTIONS FIELD?
Does it hurt to type a few lines of code? Why do you need an FM for this my friend?
Anyways can you please tell which SAP application area (viz. FI, SD etc.) do you want to run the report?
Suhas -
Input Negative values in selection screen for select-options field
I am not able enter negative values for
SELECT-OPTIONS V_ERFMG FOR MSEG-ERFMG.
It says negative values are not allowed but I need to check for negative values. Kindly provide me solution.You can't put the negative values here...because the Domain which is attached to MSEG-ERFMG has not the "Sign" checkbox on.
Try with this code:
tables:wbrp.
SELECT-OPTIONS V_ERFMG FOR WBRP-menge.
Regards,
Naimesh Patel -
HI ALL,
please help me.
i need to get f4 help for zlsch field, if i give only one company code its working fine , if u give 2 company codes its not working,even though i kept s_bukrs-high code.
please help me
its urgent
s_bukrs FOR lfb1-bukrs no intervals OBLIGATORY,
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_zlsch-low.
data : l_dyname type standard table of DYNPREAD with header line.
l_dyname-FIELDNAME = 'S_BUKRS-LOW'.
append l_dyname.
l_dyname-FIELDNAME = 'S_BUKRS-HIGH'.
append l_dyname.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-cprog
dynumb = sy-dynnr
tables
dynpfields = l_dyname
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh s_bukrs.
loop at l_dyname.
s_bukrs-low = l_dyname-FIELDVALUE.
s_bukrs-SIGN = 'I'.
s_bukrs-OPTION = 'EQ'.
append s_bukrs.
endloop.
SELECT zbukr
zlsch
FROM t042e
INTO TABLE gt_t042e
WHERE zbukr IN s_bukrs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield ='ZLSCH'
dynpprog = sy-cprog
dynpnr = '1000' "sy-dynnr
dynprofield = 'S_ZLSCH'
VALUE = '*'
value_org = 'S'
TABLES
value_tab = gt_t042e
RETURN_TAB = return_tab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3Hi,
The code will not get executed for s_zlsch-high.
Put the code in which you are using the function module for fetching the values in a PERFORM.
Call this perform twice.
Once for s_zlsch-low and once for s_zlsch-high.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_zlsch-low.
perform <perfname>.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_zlsch-high.
perform <perfname>.
Reward if helpful.
Regards. -
Value help for select options (pass the selected values to the select opt)
Hi everyone,
I created a custom value help for my select options.
It works fine, when the user clicks on the value help, my own view is displayed, and the user can select the required values:
lt_range_table =
wd_this->m_handler->create_range_table(
i_typename = 'ORGEH' ).
* add a new field to the selection
wd_this->m_handler->add_selection_field(
i_id = 'ORGEH'
i_value_help_id = 'MYSO'
i_value_help_type = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_APPLDEV
it_result = lt_range_table
i_read_only = read_only ).
The problem is, how can I pass the values to the select option? When the user selects the values in my view, I have them in an internal table. But how can i pass these values to the select option? I suppose there is declared method for this... but which one?
Thanks
N.Sorry for the stupid question, but it seems I can't acces my attribute:
I create it in the component controller
NODE: 'APP_DATA'
Attribute: M_HANDLER TYPE IF_WD_SELECT_OPTIONS
Cardinality 1..1
Selection 1..1
Singleton = 'X'
I pass the values int he EDOINIT method of MAIN view:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
RECEIVING
CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
ls_app_data-m_handler = wd_this->m_handler.
lo_child->bind_structure( ls_app_data ).
After this code I test it if the binding is correct:
DATA: ls_test TYPE wd_comp_controller->element_app_data.
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
IMPORTING
STATIC_ATTRIBUTES = ls_test.
The lstest is correct_. It has the reference for the SelectOption
Now, in the SEL_TREE View:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
RECEIVING
CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
*Get the data from the node
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
IMPORTING
STATIC_ATTRIBUTES = ls_app_data.
wd_this->m_handler = ls_app_data-m_handler.
The ls_app_data-m_handler is INITIAL. There is no value in it.
What did I do wrongly?
Please help
Thanks
N. -
Search help for select options
Hi,
I want to give search help for a field on selection screen based on value in another field in same selection screen. I am using DYNP_VALUES_READ function module to retain the values and F4IF_INT_TABLE_VALUE_REQUEST function module to give search help and it works fine, but when i give multiple selections i am not able to read the values. Please help. Points will be rewarded.Hi,
Check the below code.
tables: t001k.
For Identification Number
DATA: BEGIN OF it_bwkey OCCURS 0,
bwkey LIKE t001k-bwkey,
END OF it_bwkey.
data: v_bukrs(4).
For Run date
DATA: BEGIN OF it_bukrs OCCURS 0,
bukrs LIKE t001k-bukrs,
END OF it_bukrs.
DATA it_ret LIKE ddshretval OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK main WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bukrs(4) TYPE c.
SELECT-OPTIONS s_bwkey FOR t001k-bwkey NO INTERVALS.
SELECTION-SCREEN END OF BLOCK main.
Validation Section
INITIALIZATION.
SELECT DISTINCT bukrs FROM t001k INTO TABLE it_bukrs.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bukrs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BUKRS'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_BUKRS'
value_org = 'S'
TABLES
value_tab = it_bukrs
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_bwkey-low.
TABLES: t130r.
DATA: BEGIN OF dynpfields OCCURS 0. "Hilfsstruktur zum auslesen des
INCLUDE STRUCTURE dynpread. "Feldwertes vom Dynpro bei >F4<
DATA: END OF dynpfields.
DATA : sy_repid LIKE sy-repid,
sy_dynnr LIKE sy-dynnr.
CLEAR dynpfields.
REFRESH dynpfields.
dynpfields-fieldname = 'P_BUKRS'.
APPEND dynpfields.
Lesen des akt. Wertes von Dynpro
sy_repid = sy-repid.
sy_dynnr = sy-dynnr.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy_repid
dynumb = sy_dynnr
TABLES
dynpfields = dynpfields
EXCEPTIONS
OTHERS = 01.
IF sy-subrc = 0.
READ TABLE dynpfields WITH KEY fieldname = 'P_BUKRS'.
IF sy-subrc = 0.
v_bukrs = dynpfields-fieldvalue.
ENDIF.
ENDIF.
SELECT bwkey FROM t001k
INTO TABLE it_bwkey
WHERE bukrs = v_bukrs.
DELETE ADJACENT DUPLICATES FROM it_bwkey.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BWKEY'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_BWKEY'
value_org = 'S'
TABLES
value_tab = it_bwkey
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
Personalised Value Help in Select-Option field WD ABAP
Hi
I would like to know how I could provide the user with generic value help. I am using the Select Options in a Web Dynpro(ABAP) Application.
Regards
FaaiezHi
The key word here is "generic value help". This means the values that I want to fill the drop down with changes all the time based on various criteria. I need to fill the help values within the ABAP code based on the values in internal tables.
Regards
Faaiez
Maybe you are looking for
-
IPod is not recognized in my computer
One day my iPod worked just fine on my PC, then the next day it stopped being recognized. My iPhone works just fine. I've tried different USB ports and different Apple cables. My iPod works on my GF's laptop. I tired every suggestion in Apple Support
-
I have an iPad 2. So does my wife. We recently went on a trip and downloaded movies to watch on the plane. My wife watched 3/4 of her movie and then fell asleep for an hour. When she went back to watch the remaining last quarter of the movie, it said
-
Hi All, We have resently upgraded from Oracle EBS 11i10 to Release 12 (Linux SLES 10). The standard report "Printed Purchase Order Report (Portrait)" runs fine when the output format is "Text" but errors out when it "XML". The report runs fine for mo
-
Switched from AOL to Apple account - now cannot use songs on 2nd computer
Hi there hope someone can help me i changed (deleted) my old account 'cause my e-mail and billing changed (from AOL to Apple ID). So far so good, after that there are no problems on my main computer. But I also registered my laptop as a 2nd user for
-
could i have a number to speak to someone about this please. u can call me on 07828200457.