Freenx bombs after KDE update
Howdy folks,
This morning freenx was fine on my Arch box - I could work with it just fine from a XP client. I ran pacman update and there was a kde upgrade along with a few other packages.
After the update, I can connect from XP client and OSX client but I get a black screen with an "X" flashing between mouse movements. It almost looks like some kind of xscreensaver x-org screensaver but xscreensaver it not running. As long as the mouse is moving I have my desktop, but click a button or stop the mouse and I get the funky "X" on a black screen.
Any ideas?
-Shawn
Looking at this some more and still baffled. I don't think it was caused by a KDE package, it looks more like an xorg thing. Here is the upgrade list:
All suggestions welcome.
-Shawn
[10/30/06 13:09] synchronizing package lists
[10/30/06 13:09] starting full system upgrade
[10/30/06 13:13] warning: /etc/raidtab saved as /etc/raidtab.pacsave
[10/30/06 13:13] removed raidtools (1.00.3-3)
[10/30/06 13:14] installed mdadm (2.5.5-2)
[10/30/06 13:14] upgraded kde-common (3.5.4-2 -> 3.5.5-1)
[10/30/06 13:14] upgraded arts (1.5.4-1 -> 1.5.5-1)
[10/30/06 13:14] upgraded dbus (0.62-3 -> 0.93-1)
[10/30/06 13:14] upgraded avahi (0.6.12-2 -> 0.6.14-1)
[10/30/06 13:14] upgraded bluez-libs (3.1-1 -> 3.7-4)
[10/30/06 13:14] upgraded coreutils (5.97-1 -> 6.4-2)
[10/30/06 13:14] upgraded orbit2 (2.14.2-1 -> 2.14.3-1)
[10/30/06 13:14] upgraded gconf (2.14.0-1 -> 2.16.0-2)
[10/30/06 13:14] installed dbus-glib (0.71-1)
[10/30/06 13:14] upgraded hal (0.5.8.1-1 -> 0.5.8.1-3)
[10/30/06 13:14] upgraded gnome-vfs (2.14.2-1 -> 2.16.1-2)
[10/30/06 13:14] upgraded gnome-menus (2.14.3-1 -> 2.16.1-1)
[10/30/06 13:14] upgraded gail (1.8.11-3 -> 1.9.3-1)
[10/30/06 13:14] upgraded libbonobo (2.14.0-1 -> 2.16.0-1)
[10/30/06 13:14] upgraded libgnome (2.14.1-1 -> 2.16.0-1)
[10/30/06 13:14] upgraded libbonoboui (2.14.0-1 -> 2.16.0-1)
[10/30/06 13:14] upgraded gnome-keyring (0.4.9-1 -> 0.6.0-1)
[10/30/06 13:14] upgraded libgnomeui (2.14.1-2 -> 2.16.0-2)
[10/30/06 13:14] upgraded gnome-desktop (2.14.3-1 -> 2.16.1-1)
[10/30/06 13:14] upgraded eel (2.14.3-1 -> 2.16.0-1)
[10/30/06 13:15] upgraded evolution-data-server (1.6.3-2 -> 1.8.1-1)
[10/30/06 13:15] upgraded gettext (0.14.6-2 -> 0.15-1)
[10/30/06 13:15] upgraded glproto (1.4.7-1 -> 1.4.8-1)
[10/30/06 13:15] upgraded gnokii (0.6.12-1 -> 0.6.14-1)
[10/30/06 13:15] upgraded guile (1.6.8-1 -> 1.8.1-1)
[10/30/06 13:15] upgraded librsvg (2.14.4-2 -> 2.16.0-1)
[10/30/06 13:15] upgraded gnome-games (2.14.3-1 -> 2.16.1-2)
[10/30/06 13:15] installed perl-xml-simple (2.15-1)
[10/30/06 13:15] installed icon-naming-utils (0.8.1-1)
[10/30/06 13:15] upgraded gnome-icon-theme (2.14.2-1 -> 2.16.0.1-1)
[10/30/06 13:15] upgraded libbeagle (0.2.7-1 -> 0.2.10-1)
[10/30/06 13:15] upgraded nautilus (2.14.3-1 -> 2.16.1-1)
[10/30/06 13:15] upgraded nautilus-cd-burner (2.14.3-1 -> 2.16.1-1)
[10/30/06 13:15] upgraded gstreamer0.10 (0.10.9-1 -> 0.10.10-1)
[10/30/06 13:15] upgraded gstreamer0.10-base (0.10.9-1 -> 0.10.10-2)
[10/30/06 13:15] installed gstreamer0.10-cdparanoia (0.10.10-1)
[10/30/06 13:15] upgraded gnome-media (2.14.2-2 -> 2.16.1-2)
[10/30/06 13:16] upgraded libwnck (2.14.3-1 -> 2.16.1-1)
[10/30/06 13:16] upgraded gnome-panel (2.14.3-1 -> 2.16.1-1)
[10/30/06 13:16] upgraded vte (0.12.2-1 -> 0.14.1-1)
[10/30/06 13:16] upgraded gnome-terminal (2.14.2-1 -> 2.16.1-2)
[10/30/06 13:16] installed libgtop (2.14.4-1)
[10/30/06 13:16] upgraded gnome-utils (2.14.0-1 -> 2.16.1-1)
[10/30/06 13:16] upgraded gstreamer0.10-ogg (0.10.9-1 -> 0.10.10-1)
[10/30/06 13:16] upgraded gstreamer0.10-vorbis (0.10.9-1 -> 0.10.10-1)
[10/30/06 13:16] upgraded imagemagick (6.2.9.2-1 -> 6.3.0.0-1)
[10/30/06 13:16] upgraded pilot-link (0.11.8-4 -> 0.12.1-1)
[10/30/06 13:16] upgraded jpilot (0.99.8-3 -> 0.99.9-1)
[10/30/06 13:17] upgraded kdelibs (3.5.4-1 -> 3.5.5-5)
[10/30/06 13:17] upgraded pmount (0.9.13-1 -> 0.9.13-2)
[10/30/06 13:17] installed dbus-qt3 (0.62-1)
[10/30/06 13:17] upgraded kdebase (3.5.4-6 -> 3.5.5-4)
[10/30/06 13:17] upgraded libmal (0.40-2 -> 0.42-1)
[10/30/06 13:17] upgraded kdepim (3.5.4-2 -> 3.5.5-2)
[10/30/06 13:17] upgraded kdemultimedia (3.5.4-2 -> 3.5.5-1)
[10/30/06 13:17] upgraded kdegames (3.5.4-1 -> 3.5.5-1)
[10/30/06 13:17] upgraded kdeaddons (3.5.4-1 -> 3.5.5-1)
[10/30/06 13:17] upgraded kdeadmin (3.5.4-1 -> 3.5.5-1)
[10/30/06 13:17] upgraded kdebindings (3.5.4-1 -> 3.5.5-1)
[10/30/06 13:18] upgraded kdeedu (3.5.4-1 -> 3.5.5-1)
[10/30/06 13:18] upgraded kdegraphics (3.5.4-2 -> 3.5.5-1)
[10/30/06 13:18] upgraded kdenetwork (3.5.4-1 -> 3.5.5-1)
[10/30/06 13:18] upgraded kdetoys (3.5.4-1 -> 3.5.5-1)
[10/30/06 13:18] upgraded kdeutils (3.5.4-1 -> 3.5.5-1)
[10/30/06 13:18] upgraded kernel-headers (2.6.18-3 -> 2.6.18.1-1)
[10/30/06 13:18] upgraded libcap (1.10-1 -> 1.10-2)
[10/30/06 13:18] upgraded libgtkhtml (2.6.3-3 -> 2.6.3-4)
[10/30/06 13:18] upgraded metacity (2.14.5-1 -> 2.16.3-1)
[10/30/06 13:18] upgraded pciutils (2.2.1-2 -> 2.2.4-1)
[10/30/06 13:18] upgraded poppler (0.5.3-2 -> 0.5.4-1)
[10/30/06 13:18] upgraded pygobject (2.10.1-1 -> 2.12.2-1)
[10/30/06 13:18] upgraded pygtk (2.8.6-3 -> 2.10.3-1)
[10/30/06 13:18] upgraded xorg-fonts-encodings (1.0.0-2 -> 1.0.1-1)
[10/30/06 13:18] upgraded xproto (7.0.7-1 -> 7.0.9-1)
[10/30/06 13:18] upgraded xterm (207-1 -> 222-1)
Similar Messages
-
Black screen after KDE update (14.12.1)
A few errors or warning in .xsession.errors (don't know if they're relevant):
plasma-desktop(865)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(864): Communication problem with "plasma-desktop" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Message did not receive a reply (timeout by message bus)" "
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Renaming $HOME/.kde4 and deleting /var/tmp/kdecache-$USER didn't solve anything.
I can launch applications with Alt-F2, but the screen remains black.
Thanks for your help.
[2015-01-24 22:45] [ALPM] transaction started
[2015-01-24 22:45] [ALPM] removed kdesdk-okteta (4.14.3-1)
[2015-01-24 22:45] [ALPM] removed kdebase-kwrite (4.14.3-1)
[2015-01-24 22:45] [ALPM] removed kdebase-katepart (4.14.3-1)
[2015-01-24 22:45] [ALPM] removed kdebase-konsole (4.14.3-1)
[2015-01-24 22:45] [ALPM] removed kactivities4 (4.13.3-1)
[2015-01-24 22:45] [ALPM] upgraded kde-base-artwork (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:45] [ALPM] upgraded kde-l10n-fr (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:45] [ALPM] upgraded mesa (10.4.2-1 -> 10.4.3-1)
[2015-01-24 22:45] [ALPM] upgraded kdelibs (4.14.3-2 -> 4.14.4-1)
[2015-01-24 22:46] [ALPM] upgraded oxygen-icons (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] installed qt5-x11extras (5.4.0-3)
[2015-01-24 22:46] [ALPM] installed kglobalaccel (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kwidgetsaddons (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kconfig (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kcompletion (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed qt5-script (5.4.0-3)
[2015-01-24 22:46] [ALPM] installed ki18n (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kcoreaddons (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kwindowsystem (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kcrash (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kdbusaddons (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kservice (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed qt5-svg (5.4.0-3)
[2015-01-24 22:46] [ALPM] installed polkit-qt5 (0.112-2)
[2015-01-24 22:46] [ALPM] installed kauth (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kcodecs (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kguiaddons (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kconfigwidgets (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kitemviews (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kiconthemes (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed sonnet (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed ktextwidgets (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed attica-qt5 (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kxmlgui (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kcmutils (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed qt5-xmlpatterns (5.4.0-3)
[2015-01-24 22:46] [ALPM] installed qt5-declarative (5.4.0-3)
[2015-01-24 22:46] [ALPM] installed solid (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed karchive (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kjobwidgets (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kbookmarks (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed phonon-qt5 (4.8.3-1)
[2015-01-24 22:46] [ALPM] installed libdbusmenu-qt5 (0.9.3+14.10.20140619-1)
[2015-01-24 22:46] [ALPM] installed knotifications (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kwallet (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kio (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kdeclarative (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kactivities-frameworks (5.6.0-1)
[2015-01-24 22:46] [ALPM] upgraded kdebase-runtime (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kdebase-lib (4.14.3-1 -> 14.12.1-2)
[2015-01-24 22:46] [ALPM] upgraded kdepimlibs (4.14.3-1 -> 4.14.4-1)
[2015-01-24 22:46] [ALPM] upgraded kdegraphics-mobipocket (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kdebase-dolphin (4.14.3-1 -> 14.12.1-2)
[2015-01-24 22:46] [ALPM] upgraded kdebase-kdepasswd (4.14.3-1 -> 14.12.1-2)
[2015-01-24 22:46] [ALPM] upgraded kdebase-kdialog (4.14.3-1 -> 14.12.1-2)
[2015-01-24 22:46] [ALPM] upgraded kdebase-kfind (4.14.3-1 -> 14.12.1-2)
[2015-01-24 22:46] [ALPM] upgraded kdebase-keditbookmarks (4.14.3-1 -> 14.12.1-2)
[2015-01-24 22:46] [ALPM] upgraded kdebase-konqueror (4.14.3-1 -> 14.12.1-2)
[2015-01-24 22:46] [ALPM] upgraded kdebase-konq-plugins (4.14.3-1 -> 14.12.1-2)
[2015-01-24 22:46] [ALPM] installed kunitconversion (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kplotting (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed qt5-sensors (5.4.0-3)
[2015-01-24 22:46] [ALPM] installed geoclue (0.12.99-2)
[2015-01-24 22:46] [ALPM] installed qt5-location (5.4.0-3)
[2015-01-24 22:46] [ALPM] installed qt5-webchannel (5.4.0-3)
[2015-01-24 22:46] [ALPM] installed qt5-webkit (5.4.0-3)
[2015-01-24 22:46] [ALPM] installed kparts (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kdewebkit (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kdesignerplugin (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kinit (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kitemmodels (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kemoticons (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kdelibs4support (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed knotifyconfig (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kpty (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed konsole (14.12.1-1)
[2015-01-24 22:46] [ALPM] installed knewstuff (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed libgit2 (1:0.21.1-2)
[2015-01-24 22:46] [ALPM] installed ktexteditor (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed qt5-quickcontrols (5.4.0-3)
[2015-01-24 22:46] [ALPM] installed kpackage (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed plasma-framework (5.6.0-2)
[2015-01-24 22:46] [ALPM] installed threadweaver (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kded (5.6.0-1)
[2015-01-24 22:46] [ALPM] installed kwrite (14.12.1-2)
[2015-01-24 22:46] [ALPM] upgraded libkolabxml (1.0.2-2 -> 1.1.0-1)
[2015-01-24 22:46] [ALPM] upgraded kdepim-runtime (4.14.3-1 -> 4.14.4-1)
[2015-01-24 22:46] [ALPM] upgraded kdebase-plasma (4.14.3-1 -> 14.12.1-2)
[2015-01-24 22:46] [ALPM] upgraded kde-wallpapers (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kde-meta-kdebase (4.13-3 -> 14.12-1)
[2015-01-24 22:46] [ALPM] upgraded kdeadmin-ksystemlog (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] installed katepart4 (4.14.3-2)
[2015-01-24 22:46] [ALPM] upgraded libkdegames (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kdegames-kbreakout (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded libkmahjongg (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kdegames-kmahjongg (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kdegames-kpatience (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kdegraphics-kcolorchooser (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kdegraphics-kolourpaint (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded libkipi (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kdegraphics-ksnapshot (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded libkexiv2 (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kdegraphics-okular (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kdegraphics-svgpart (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded libkdcraw (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kdegraphics-thumbnailers (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kdemultimedia-kmix (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:46] [ALPM] upgraded kdepim-libkdepim (4.14.3-2 -> 4.14.4-1)
[2015-01-24 22:46] [ALPM] upgraded kdepim-akonadiconsole (4.14.3-2 -> 4.14.4-1)
[2015-01-24 22:46] [ALPM] upgraded kdepim-akregator (4.14.3-2 -> 4.14.4-1)
[2015-01-24 22:46] [ALPM] upgraded kdepim-kaddressbook (4.14.3-2 -> 4.14.4-1)
[2015-01-24 22:46] [ALPM] upgraded kdepim-kmail (4.14.3-2 -> 4.14.4-1)
[2015-01-24 22:46] [ALPM] upgraded kdepim-kontact (4.14.3-2 -> 4.14.4-1)
[2015-01-24 22:46] [ALPM] upgraded kdepim-korganizer (4.14.3-2 -> 4.14.4-1)
[2015-01-24 22:46] [ALPM] upgraded kdepim-kresources (4.14.3-2 -> 4.14.4-1)
[2015-01-24 22:46] [ALPM] installed qca-qt5 (2.1.0.3-1)
[2015-01-24 22:46] [ALPM] installed okteta (14.12.1-3)
[2015-01-24 22:47] [ALPM] upgraded kdeutils-ark (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:47] [ALPM] upgraded kdeutils-filelight (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:47] [ALPM] upgraded kdeutils-kcalc (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:47] [ALPM] upgraded kdeutils-kcharselect (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:47] [ALPM] upgraded kdeutils-kwalletmanager (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:47] [ALPM] upgraded kdeutils-print-manager (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:47] [ALPM] upgraded kdewebdev-kfilereplace (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:47] [ALPM] upgraded libkcddb (4.14.3-2 -> 14.12.1-1)
[2015-01-24 22:47] [ALPM] upgraded libkcompactdisc (4.14.3-1 -> 14.12.1-1)
[2015-01-24 22:47] [ALPM] upgraded libmm-glib (1.2.0-5 -> 1.4.2-1)
[2015-01-24 22:47] [ALPM] upgraded libnm-glib (0.9.10.0-4 -> 1.0.0-1)
[2015-01-24 22:47] [ALPM] transaction completed
[2015-01-24 22:47] [PACMAN] Running 'pacman -S konsolepart4'
[2015-01-24 22:47] [ALPM] transaction started
[2015-01-24 22:47] [ALPM] installed konsolepart4 (4.14.3-4)
[2015-01-24 22:47] [ALPM] transaction completed
Last edited by jib2 (2015-01-25 17:36:13)Hello ahmedgemy
Check out the Display section of the first article below to see if you can get the Screen to turn back on. You also may want to try restoring your iPhone using iTunes to see if that resolves the issue.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G. -
Keyboard layout indicator rendering issues after KDE update.
The lower part of the flag is wrong. When I open "configure", all the icons are OK there.
Strange issue. Does anybody else have it?
Last edited by Mad Fish (2010-02-11 19:45:27)I even tried to install KDEMod, but the issue is still there.
Also I've tried to reinstall the specific packages (kdebase-runtime contains country flags icons, and kdebase-workspace contains the kxkb) with -Rd and then -S, but it doesn't help as well.
Please help! That is really annoying
Like a black spot on a white shirt. -
[SOLVED] broken gnome after lib update
Hi all
After the update, startx fails w/ gnome but not w/ kde. I know that my xf86-video-intel was changed to xf86-video-intel-uxa. next I tried xf86-video-intel-sna (because it is listed on arch's xps15z page) and still no success.
I would really love some help. The actual fail goes something like: wallpaper, mouse, top bar (w/ clock etc) and then the bottom bar, and right when it looks like it will hand over control, I get dropped into gnome error screen letting me know that something went wrong.
Thank you
Some logs:
[root@clc ~]# grep EE /var/log/Xorg.0.log
[ 189.827] Current Operating System: Linux clc 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 189.832] (II) Loading extension MIT-SCREEN-SAVER
[ 189.833] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 189.833] (EE) Failed to load module "fbdev" (module does not exist, 0)
[root@clc ~]# grep WW /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 189.831] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 189.831] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 189.831] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 189.832] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 189.833] (WW) Warning, couldn't open module vesa
[ 189.833] (WW) Warning, couldn't open module fbdev
xorg
[ 142.495]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 142.495] X Protocol Version 11, Revision 0
[ 142.495] Build Operating System: Linux 3.4.4-3-ARCH x86_64
[ 142.495] Current Operating System: Linux clc 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64
[ 142.495] Kernel command line: root=/dev/sda5 ro acpi=noirq i915.i915_enable_rc6=1 i915.semaphores=1
[ 142.495] Build Date: 09 July 2012 03:59:39PM
[ 142.495]
[ 142.495] Current version of pixman: 0.26.2
[ 142.495] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 142.495] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 142.495] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 18 08:07:11 2012
[ 142.496] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 142.496] (==) No Layout section. Using the first Screen section.
[ 142.496] (==) No screen section available. Using defaults.
[ 142.496] (**) |-->Screen "Default Screen Section" (0)
[ 142.496] (**) | |-->Monitor "<default monitor>"
[ 142.496] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 142.496] (==) Automatically adding devices
[ 142.496] (==) Automatically enabling devices
[ 142.496] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 142.496] Entry deleted from font path.
[ 142.497] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 142.497] Entry deleted from font path.
[ 142.497] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 142.497] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 142.497] Entry deleted from font path.
[ 142.497] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 142.497] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 142.497] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 142.497] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 142.497] (II) Loader magic: 0x7c8b00
[ 142.497] (II) Module ABI versions:
[ 142.497] X.Org ANSI C Emulation: 0.4
[ 142.497] X.Org Video Driver: 12.0
[ 142.497] X.Org XInput driver : 16.0
[ 142.497] X.Org Server Extension : 6.0
[ 142.498] (--) PCI:*(0:0:2:0) 8086:0126:1028:0446 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 142.498] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 142.499] (II) LoadModule: "extmod"
[ 142.499] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 142.499] (II) Module extmod: vendor="X.Org Foundation"
[ 142.499] compiled for 1.12.3, module version = 1.0.0
[ 142.499] Module class: X.Org Server Extension
[ 142.499] ABI class: X.Org Server Extension, version 6.0
[ 142.499] (II) Loading extension MIT-SCREEN-SAVER
[ 142.499] (II) Loading extension XFree86-VidModeExtension
[ 142.499] (II) Loading extension XFree86-DGA
[ 142.499] (II) Loading extension DPMS
[ 142.499] (II) Loading extension XVideo
[ 142.499] (II) Loading extension XVideo-MotionCompensation
[ 142.499] (II) Loading extension X-Resource
[ 142.499] (II) LoadModule: "dbe"
[ 142.500] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 142.500] (II) Module dbe: vendor="X.Org Foundation"
[ 142.500] compiled for 1.12.3, module version = 1.0.0
[ 142.500] Module class: X.Org Server Extension
[ 142.500] ABI class: X.Org Server Extension, version 6.0
[ 142.500] (II) Loading extension DOUBLE-BUFFER
[ 142.500] (II) LoadModule: "glx"
[ 142.500] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 142.500] (II) Module glx: vendor="X.Org Foundation"
[ 142.500] compiled for 1.12.3, module version = 1.0.0
[ 142.500] ABI class: X.Org Server Extension, version 6.0
[ 142.501] (==) AIGLX enabled
[ 142.501] (II) Loading extension GLX
[ 142.501] (II) LoadModule: "record"
[ 142.501] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 142.501] (II) Module record: vendor="X.Org Foundation"
[ 142.501] compiled for 1.12.3, module version = 1.13.0
[ 142.501] Module class: X.Org Server Extension
[ 142.501] ABI class: X.Org Server Extension, version 6.0
[ 142.501] (II) Loading extension RECORD
[ 142.501] (II) LoadModule: "dri"
[ 142.501] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 142.502] (II) Module dri: vendor="X.Org Foundation"
[ 142.502] compiled for 1.12.3, module version = 1.0.0
[ 142.502] ABI class: X.Org Server Extension, version 6.0
[ 142.502] (II) Loading extension XFree86-DRI
[ 142.502] (II) LoadModule: "dri2"
[ 142.502] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 142.502] (II) Module dri2: vendor="X.Org Foundation"
[ 142.502] compiled for 1.12.3, module version = 1.2.0
[ 142.502] ABI class: X.Org Server Extension, version 6.0
[ 142.502] (II) Loading extension DRI2
[ 142.502] (==) Matched intel as autoconfigured driver 0
[ 142.502] (==) Matched vesa as autoconfigured driver 1
[ 142.502] (==) Matched fbdev as autoconfigured driver 2
[ 142.502] (==) Assigned the driver to the xf86ConfigLayout
[ 142.502] (II) LoadModule: "intel"
[ 142.502] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 142.503] (II) Module intel: vendor="X.Org Foundation"
[ 142.503] compiled for 1.12.2, module version = 2.19.0
[ 142.503] Module class: X.Org Video Driver
[ 142.503] ABI class: X.Org Video Driver, version 12.0
[ 142.503] (II) LoadModule: "vesa"
[ 142.503] (WW) Warning, couldn't open module vesa
[ 142.503] (II) UnloadModule: "vesa"
[ 142.503] (II) Unloading vesa
[ 142.503] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 142.503] (II) LoadModule: "fbdev"
[ 142.504] (WW) Warning, couldn't open module fbdev
[ 142.504] (II) UnloadModule: "fbdev"
[ 142.504] (II) Unloading fbdev
[ 142.504] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 142.504] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 142.505] (--) using VT number 7
[ 142.521] drmOpenDevice: node name is /dev/dri/card0
[ 142.521] drmOpenDevice: open result is 8, (OK)
[ 142.521] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 142.522] drmOpenDevice: node name is /dev/dri/card0
[ 142.522] drmOpenDevice: open result is 8, (OK)
[ 142.522] drmOpenByBusid: drmOpenMinor returns 8
[ 142.522] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 142.522] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 142.522] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 142.522] (==) intel(0): RGB weight 888
[ 142.522] (==) intel(0): Default visual is TrueColor
[ 142.522] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 142.522] (--) intel(0): Chipset: "Sandybridge Mobile (GT2+)"
[ 142.522] (--) intel(0): Disabling use of vmap
[ 142.522] (**) intel(0): Framebuffer tiled
[ 142.522] (**) intel(0): Pixmaps tiled
[ 142.522] (**) intel(0): 3D buffers tiled
[ 142.522] (**) intel(0): Throttling enabled
[ 142.522] (**) intel(0): Delayed flush enabled
[ 142.522] (II) intel(0): Output LVDS1 has no monitor section
[ 142.523] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 142.523] (II) intel(0): Output VGA1 has no monitor section
[ 142.524] (II) intel(0): Output HDMI1 has no monitor section
[ 142.563] (II) intel(0): Output DP1 has no monitor section
[ 142.563] (II) intel(0): EDID for output LVDS1
[ 142.563] (II) intel(0): Manufacturer: AUO Model: 30ed Serial#: 0
[ 142.563] (II) intel(0): Year: 2010 Week: 0
[ 142.563] (II) intel(0): EDID Version: 1.4
[ 142.563] (II) intel(0): Digital Display Input
[ 142.563] (II) intel(0): 6 bits per channel
[ 142.563] (II) intel(0): Digital interface is undefined
[ 142.563] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 142.563] (II) intel(0): Gamma: 2.20
[ 142.563] (II) intel(0): No DPMS capabilities specified
[ 142.563] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 142.563] (II) intel(0): First detailed timing is preferred mode
[ 142.563] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 142.564] (II) intel(0): redX: 0.620 redY: 0.349 greenX: 0.324 greenY: 0.606
[ 142.564] (II) intel(0): blueX: 0.152 blueY: 0.118 whiteX: 0.313 whiteY: 0.329
[ 142.564] (II) intel(0): Manufacturer's mask: 0
[ 142.564] (II) intel(0): Supported detailed timing:
[ 142.564] (II) intel(0): clock: 140.0 MHz Image Size: 344 x 193 mm
[ 142.564] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2068 h_blank_end 2144 h_border: 0
[ 142.564] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1084 v_blanking: 1088 v_border: 0
[ 142.564] (II) intel(0): Supported detailed timing:
[ 142.564] (II) intel(0): clock: 93.3 MHz Image Size: 344 x 193 mm
[ 142.564] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2068 h_blank_end 2144 h_border: 0
[ 142.564] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1084 v_blanking: 1088 v_border: 0
[ 142.564] (II) intel(0): 00R4M\80B156HW3
[ 142.564] (II) intel(0): Unknown vendor-specific block 0
[ 142.564] (II) intel(0): EDID (in hex):
[ 142.564] (II) intel(0): 00ffffffffffff0006afed3000000000
[ 142.564] (II) intel(0): 001401049022137802d1159e59539b27
[ 142.564] (II) intel(0): 1e505400000001010101010101010101
[ 142.564] (II) intel(0): 010101010101b03680e0703808403064
[ 142.564] (II) intel(0): 310058c11000001a752480e070380840
[ 142.564] (II) intel(0): 3064310058c11000001a000000fe0030
[ 142.564] (II) intel(0): 3052344d804231353648573300000000
[ 142.564] (II) intel(0): 00004122960111000002010a20200030
[ 142.564] (II) intel(0): EDID vendor "AUO", prod id 12525
[ 142.564] (II) intel(0): Printing DDC gathered Modelines:
[ 142.564] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz eP)
[ 142.564] (II) intel(0): Modeline "1920x1080"x0.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz e)
[ 142.564] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 142.564] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 142.564] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 142.564] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 142.564] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 142.564] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 142.564] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 142.564] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 142.564] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 142.564] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 142.564] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 142.564] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 142.565] (II) intel(0): Printing probed modes for output LVDS1
[ 142.565] (II) intel(0): Modeline "1920x1080"x60.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz eP)
[ 142.565] (II) intel(0): Modeline "1920x1080"x40.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz e)
[ 142.565] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 142.565] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 142.565] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 142.565] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 142.565] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 142.565] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 142.565] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 142.565] (II) intel(0): EDID for output VGA1
[ 142.566] (II) intel(0): EDID for output HDMI1
[ 142.606] (II) intel(0): EDID for output DP1
[ 142.606] (II) intel(0): Output LVDS1 connected
[ 142.606] (II) intel(0): Output VGA1 disconnected
[ 142.606] (II) intel(0): Output HDMI1 disconnected
[ 142.606] (II) intel(0): Output DP1 disconnected
[ 142.607] (II) intel(0): Using exact sizes for initial modes
[ 142.607] (II) intel(0): Output LVDS1 using initial mode 1920x1080
[ 142.607] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 142.607] (**) intel(0): Display dimensions: (340, 190) mm
[ 142.607] (**) intel(0): DPI set to (143, 144)
[ 142.607] (II) Loading sub module "fb"
[ 142.607] (II) LoadModule: "fb"
[ 142.607] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 142.607] (II) Module fb: vendor="X.Org Foundation"
[ 142.607] compiled for 1.12.3, module version = 1.0.0
[ 142.607] ABI class: X.Org ANSI C Emulation, version 0.4
[ 142.607] (II) Loading sub module "dri2"
[ 142.607] (II) LoadModule: "dri2"
[ 142.608] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 142.608] (II) Module dri2: vendor="X.Org Foundation"
[ 142.608] compiled for 1.12.3, module version = 1.2.0
[ 142.608] ABI class: X.Org Server Extension, version 6.0
[ 142.608] (==) Depth 24 pixmap format is 32 bpp
[ 142.608] (II) intel(0): SNA initialized with SandyBridge backend
[ 142.608] (==) intel(0): Backing store disabled
[ 142.608] (==) intel(0): Silken mouse enabled
[ 142.608] (II) intel(0): Initializing HW Cursor
[ 142.608] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 142.609] (==) intel(0): DPMS enabled
[ 142.609] (II) intel(0): [DRI2] Setup complete
[ 142.610] (II) intel(0): [DRI2] DRI driver: i965
[ 142.610] (II) intel(0): direct rendering: DRI2 Enabled
[ 142.610] (==) intel(0): hotplug detection: "enabled"
[ 142.610] (--) RandR disabled
[ 142.610] (II) Initializing built-in extension Generic Event Extension
[ 142.610] (II) Initializing built-in extension SHAPE
[ 142.610] (II) Initializing built-in extension MIT-SHM
[ 142.610] (II) Initializing built-in extension XInputExtension
[ 142.610] (II) Initializing built-in extension XTEST
[ 142.610] (II) Initializing built-in extension BIG-REQUESTS
[ 142.610] (II) Initializing built-in extension SYNC
[ 142.610] (II) Initializing built-in extension XKEYBOARD
[ 142.610] (II) Initializing built-in extension XC-MISC
[ 142.610] (II) Initializing built-in extension SECURITY
[ 142.610] (II) Initializing built-in extension XINERAMA
[ 142.610] (II) Initializing built-in extension XFIXES
[ 142.610] (II) Initializing built-in extension RENDER
[ 142.610] (II) Initializing built-in extension RANDR
[ 142.610] (II) Initializing built-in extension COMPOSITE
[ 142.610] (II) Initializing built-in extension DAMAGE
[ 142.620] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 142.620] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 142.620] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 142.620] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 142.620] (II) AIGLX: Loaded and initialized i965
[ 142.620] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 142.686] (II) intel(0): Setting screen physical size to 508 x 285
[ 142.729] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 142.729] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 142.729] (II) LoadModule: "evdev"
[ 142.729] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 142.729] (II) Module evdev: vendor="X.Org Foundation"
[ 142.729] compiled for 1.12.0, module version = 2.7.0
[ 142.729] Module class: X.Org XInput Driver
[ 142.729] ABI class: X.Org XInput driver, version 16.0
[ 142.729] (II) Using input driver 'evdev' for 'Power Button'
[ 142.729] (**) Power Button: always reports core events
[ 142.729] (**) evdev: Power Button: Device: "/dev/input/event7"
[ 142.729] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 142.729] (--) evdev: Power Button: Found keys
[ 142.729] (II) evdev: Power Button: Configuring as keyboard
[ 142.730] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
[ 142.730] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 142.730] (**) Option "xkb_rules" "evdev"
[ 142.730] (**) Option "xkb_model" "evdev"
[ 142.730] (**) Option "xkb_layout" "us"
[ 142.755] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 142.755] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 142.755] (II) Using input driver 'evdev' for 'Video Bus'
[ 142.755] (**) Video Bus: always reports core events
[ 142.755] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 142.755] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 142.755] (--) evdev: Video Bus: Found keys
[ 142.755] (II) evdev: Video Bus: Configuring as keyboard
[ 142.755] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15/event15"
[ 142.755] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 142.755] (**) Option "xkb_rules" "evdev"
[ 142.755] (**) Option "xkb_model" "evdev"
[ 142.755] (**) Option "xkb_layout" "us"
[ 142.756] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 142.756] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 142.756] (II) Using input driver 'evdev' for 'Video Bus'
[ 142.756] (**) Video Bus: always reports core events
[ 142.756] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 142.756] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 142.757] (--) evdev: Video Bus: Found keys
[ 142.757] (II) evdev: Video Bus: Configuring as keyboard
[ 142.757] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input14/event14"
[ 142.757] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 142.757] (**) Option "xkb_rules" "evdev"
[ 142.757] (**) Option "xkb_model" "evdev"
[ 142.757] (**) Option "xkb_layout" "us"
[ 142.758] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 142.758] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 142.758] (II) Using input driver 'evdev' for 'Power Button'
[ 142.758] (**) Power Button: always reports core events
[ 142.758] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 142.758] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 142.758] (--) evdev: Power Button: Found keys
[ 142.758] (II) evdev: Power Button: Configuring as keyboard
[ 142.758] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 142.758] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 142.758] (**) Option "xkb_rules" "evdev"
[ 142.758] (**) Option "xkb_model" "evdev"
[ 142.758] (**) Option "xkb_layout" "us"
[ 142.759] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 142.759] (II) No input driver specified, ignoring this device.
[ 142.759] (II) This device may have been added with another device file.
[ 142.760] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 142.760] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 142.760] (II) Using input driver 'evdev' for 'Sleep Button'
[ 142.760] (**) Sleep Button: always reports core events
[ 142.760] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 142.760] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 142.760] (--) evdev: Sleep Button: Found keys
[ 142.760] (II) evdev: Sleep Button: Configuring as keyboard
[ 142.760] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 142.760] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 142.760] (**) Option "xkb_rules" "evdev"
[ 142.760] (**) Option "xkb_model" "evdev"
[ 142.760] (**) Option "xkb_layout" "us"
[ 142.761] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event12)
[ 142.761] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "evdev keyboard catchall"
[ 142.761] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2HDM'
[ 142.761] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[ 142.761] (**) evdev: Laptop_Integrated_Webcam_2HDM: Device: "/dev/input/event12"
[ 142.761] (--) evdev: Laptop_Integrated_Webcam_2HDM: Vendor 0x5986 Product 0x2af
[ 142.761] (--) evdev: Laptop_Integrated_Webcam_2HDM: Found keys
[ 142.761] (II) evdev: Laptop_Integrated_Webcam_2HDM: Configuring as keyboard
[ 142.761] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12/event12"
[ 142.761] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[ 142.761] (**) Option "xkb_rules" "evdev"
[ 142.761] (**) Option "xkb_model" "evdev"
[ 142.761] (**) Option "xkb_layout" "us"
[ 142.762] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 142.762] (II) No input driver specified, ignoring this device.
[ 142.762] (II) This device may have been added with another device file.
[ 142.763] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 142.763] (II) No input driver specified, ignoring this device.
[ 142.763] (II) This device may have been added with another device file.
[ 142.763] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 142.763] (II) No input driver specified, ignoring this device.
[ 142.763] (II) This device may have been added with another device file.
[ 142.764] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[ 142.764] (II) No input driver specified, ignoring this device.
[ 142.764] (II) This device may have been added with another device file.
[ 142.765] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 142.765] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 142.765] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 142.765] (**) Logitech USB Receiver: always reports core events
[ 142.765] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 142.765] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51b
[ 142.765] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 142.765] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 142.765] (--) evdev: Logitech USB Receiver: Found relative axes
[ 142.765] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 142.765] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 142.765] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 142.765] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 142.765] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 142.765] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb2/2-2/2-2:1.0/input/input1/event1"
[ 142.765] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
[ 142.765] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 142.766] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 142.766] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 142.766] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 142.766] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 142.766] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 142.766] (II) No input driver specified, ignoring this device.
[ 142.766] (II) This device may have been added with another device file.
[ 142.766] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 142.766] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 142.766] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 142.766] (**) AT Translated Set 2 keyboard: always reports core events
[ 142.766] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 142.766] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 142.767] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 142.767] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 142.767] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 142.767] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 142.767] (**) Option "xkb_rules" "evdev"
[ 142.767] (**) Option "xkb_model" "evdev"
[ 142.767] (**) Option "xkb_layout" "us"
[ 142.767] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event13)
[ 142.767] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 142.767] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 142.767] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 142.767] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event13"
[ 142.767] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 142.767] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 142.767] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 142.767] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 142.767] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 142.767] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 142.767] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 142.767] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 142.767] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 142.767] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"
[ 142.767] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 14)
[ 142.767] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 142.767] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 142.767] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 142.767] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 142.767] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 142.767] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
[ 142.767] (II) No input driver specified, ignoring this device.
[ 142.767] (II) This device may have been added with another device file.
[ 142.767] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 142.767] (II) No input driver specified, ignoring this device.
[ 142.767] (II) This device may have been added with another device file.
[ 142.767] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
[ 142.767] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 142.767] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 142.767] (**) Dell WMI hotkeys: always reports core events
[ 142.767] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event6"
[ 142.767] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 142.767] (--) evdev: Dell WMI hotkeys: Found keys
[ 142.768] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 142.768] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[ 142.768] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)
[ 142.768] (**) Option "xkb_rules" "evdev"
[ 142.768] (**) Option "xkb_model" "evdev"
[ 142.768] (**) Option "xkb_layout" "us"
[ 142.930] (II) intel(0): EDID vendor "AUO", prod id 12525
[ 142.931] (II) intel(0): Printing DDC gathered Modelines:
[ 142.931] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz eP)
[ 142.931] (II) intel(0): Modeline "1920x1080"x0.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz e)
[ 143.236] (II) intel(0): EDID vendor "AUO", prod id 12525
[ 143.236] (II) intel(0): Printing DDC gathered Modelines:
[ 143.236] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz eP)
[ 143.236] (II) intel(0): Modeline "1920x1080"x0.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz e)
[ 148.677] (II) evdev: Power Button: Close
[ 148.677] (II) UnloadModule: "evdev"
[ 148.680] (II) evdev: Video Bus: Close
[ 148.680] (II) UnloadModule: "evdev"
[ 148.687] (II) evdev: Video Bus: Close
[ 148.687] (II) UnloadModule: "evdev"
[ 148.700] (II) evdev: Power Button: Close
[ 148.700] (II) UnloadModule: "evdev"
[ 148.703] (II) evdev: Sleep Button: Close
[ 148.703] (II) UnloadModule: "evdev"
[ 148.703] (II) evdev: Laptop_Integrated_Webcam_2HDM: Close
[ 148.703] (II) UnloadModule: "evdev"
[ 148.704] (II) evdev: Logitech USB Receiver: Close
[ 148.704] (II) UnloadModule: "evdev"
[ 148.705] (II) evdev: AT Translated Set 2 keyboard: Close
[ 148.705] (II) UnloadModule: "evdev"
[ 148.705] (II) evdev: ImPS/2 Generic Wheel Mouse: Close
[ 148.705] (II) UnloadModule: "evdev"
[ 148.705] (II) evdev: Dell WMI hotkeys: Close
[ 148.705] (II) UnloadModule: "evdev"
[ 148.809] Server terminated successfully (0). Closing log file.
startx
X.Org X Server 1.12.3
Release Date: 2012-07-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.4.4-3-ARCH x86_64
Current Operating System: Linux clc 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64
Kernel command line: root=/dev/sda5 ro acpi=noirq i915.i915_enable_rc6=1 i915.semaphores=1
Build Date: 09 July 2012 03:59:39PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 18 08:07:11 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
gnome-session[757]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
gnome-session[757]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
GNOME_KEYRING_CONTROL=/root/.cache/keyring-Gapdvn
SSH_AUTH_SOCK=/root/.cache/keyring-Gapdvn/ssh
GNOME_KEYRING_PID=776
GNOME_KEYRING_CONTROL=/root/.cache/keyring-Gapdvn
SSH_AUTH_SOCK=/root/.cache/keyring-Gapdvn/ssh
GPG_AGENT_INFO=/root/.cache/keyring-Gapdvn/gpg:0:1
GNOME_KEYRING_CONTROL=/root/.cache/keyring-Gapdvn
SSH_AUTH_SOCK=/root/.cache/keyring-Gapdvn/ssh
GPG_AGENT_INFO=/root/.cache/keyring-Gapdvn/gpg:0:1
GNOME_KEYRING_CONTROL=/root/.cache/keyring-Gapdvn
SSH_AUTH_SOCK=/root/.cache/keyring-Gapdvn/ssh
GPG_AGENT_INFO=/root/.cache/keyring-Gapdvn/gpg:0:1
(gnome-settings-daemon:773): libupower-glib-WARNING **: Couldn't enumerate devices: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
(gnome-settings-daemon:773): power-plugin-WARNING **: failed to get device list: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
** (gnome-settings-daemon:773): WARNING **: Failed to connect context: OK
** (gnome-settings-daemon:773): WARNING **: cannot connect to ConsoleKit: Error calling StartServiceByName for org.freedesktop.ConsoleKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Permission denied
(gnome-settings-daemon:773): color-plugin-WARNING **: failed to connect to colord: Error calling StartServiceByName for org.freedesktop.ColorManager: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
** (gnome-settings-daemon:773): WARNING **: cannot connect to ConsoleKit: Error calling StartServiceByName for org.freedesktop.ConsoleKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Permission denied
(gnome-settings-daemon:773): power-plugin-WARNING **: Could not connect to UPower: Error calling StartServiceByName for org.freedesktop.UPower: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
(gnome-settings-daemon:773): power-plugin-WARNING **: Could not connect to UPower: Error calling StartServiceByName for org.freedesktop.UPower: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
(gnome-settings-daemon:773): media-keys-plugin-WARNING **: Failed to get proxy for upower: Error calling StartServiceByName for org.freedesktop.UPower: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
Initializing tracker-store...
Initializing tracker-miner-fs...
Tracker-Message: Setting up monitor for changes to config file:'/root/.config/tracker/tracker-miner-fs.cfg'
Tracker-Message: Setting up monitor for changes to config file:'/root/.config/tracker/tracker-store.cfg'
Tracker-Message: Setting up monitor for changes to config file:'/root/.config/tracker/tracker-store.cfg'
Starting log:
File:'/root/.local/share/tracker/tracker-miner-fs.log'
Starting log:
File:'/root/.local/share/tracker/tracker-store.log'
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
Failed to play sound: Not available
** (nm-applet:823): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
** Message: applet now removed from the notification area
** (nm-applet:823): WARNING **: fetch_connections_done: error fetching connections: (23) Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success.
** (nm-applet:823): WARNING **: Failed to register as an agent: (23) Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
(tracker-miner-fs:822): GVFS-RemoteVolumeMonitor-WARNING **: remote volume monitor with dbus name org.gtk.Private.UDisks2VolumeMonitor is not supported
(gnome-shell:814): GVFS-RemoteVolumeMonitor-WARNING **: remote volume monitor with dbus name org.gtk.Private.UDisks2VolumeMonitor is not supported
Window manager warning: Log level 16: Could not initialize NMClient /org/freedesktop/NetworkManager: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
(gnome-shell:814): AccountsService-WARNING **: Failed to create accounts proxy: Error calling StartServiceByName for org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
Window manager warning: Log level 16: Error getting session for the process we are in: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success (g-dbus-error-quark 23)
** Message: applet now embedded in the notification area
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
(gnome-shell:814): GLib-GIO-CRITICAL **: g_dbus_proxy_call_internal: assertion `G_IS_DBUS_PROXY (proxy)' failed
AccountsService:ERROR:act-user-manager.c:2156:load_users: assertion failed: (manager->priv->accounts_proxy != NULL)
** Message: applet now removed from the notification area
gnome-session[757]: WARNING: Application 'gnome-shell.desktop' killed by signal 6
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
(gnome-shell:939): GVFS-RemoteVolumeMonitor-WARNING **: remote volume monitor with dbus name org.gtk.Private.UDisks2VolumeMonitor is not supported
Window manager warning: Log level 16: Could not initialize NMClient /org/freedesktop/NetworkManager: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
(gnome-shell:939): AccountsService-WARNING **: Failed to create accounts proxy: Error calling StartServiceByName for org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
Window manager warning: Log level 16: Error getting session for the process we are in: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success (g-dbus-error-quark 23)
** Message: applet now embedded in the notification area
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
(gnome-shell:939): GLib-GIO-CRITICAL **: g_dbus_proxy_call_internal: assertion `G_IS_DBUS_PROXY (proxy)' failed
AccountsService:ERROR:act-user-manager.c:2156:load_users: assertion failed: (manager->priv->accounts_proxy != NULL)
** Message: applet now removed from the notification area
gnome-session[757]: WARNING: Application 'gnome-shell.desktop' killed by signal 6
gnome-session[757]: WARNING: App 'gnome-shell.desktop' respawning too quickly
gnome-session[757]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
gnome-session[757]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
(gnome-settings-daemon:773): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(gnome-settings-daemon:773): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
[1342613232,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application
xinit: connection to X server lost
waiting for X server to shut down
Received signal:1->'Hangup'
Received signal:1->'Hangup'
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Received signal:15->'Terminated'
(tracker-miner-fs:822): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
(tracker-miner-fs:822): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
(tracker-miner-fs:822): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
OK
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Received signal:15->'Terminated'
OK
Server terminated successfully (0). Closing log file.
Last edited by killnine (2012-07-19 15:42:27)Trilby wrote:Are you trying to start X as root? Why is Xorg looking in /root/.config/ ?
I am. I prefer to run as root.
I have tried running as non root and the result is the same.
Do you think it has to do with /lib changes? -
KDEMod 3.5: problems after pacman update
I did a pacman update of KDEMod 3.5, and now, several things don't work anymore:
-there's no desktop background, it's just black
-there's no icons on the desktop: as mentioned above, it's just black (so I think the component that displays wallpaper and icons doesn't work)
-when just starting KDE, there's a "report crash" window (I don't know which the thing that crashes is, it just shows the crash window and I can click it away)
-when choosing "lock session" in the start menu, nothing happens. It used to show screensaver and require password to continue, now it does nothing at all
-maybe some other things I didn't discover yet are also broken...
How can I fix all this? I'd like my system to work properly, like it used to. KDEMod 3.5 appears to have some difficulties after pacman updates these days...
Thanks.
Last edited by aardwolf (2009-08-17 16:37:21)Hmm, I just realized that the wallpaper is a jpeg, and it could be related to the fix I did in my previous post: http://bbs.archlinux.org/viewtopic.php?id=78076
Are they going to fix those jpeg issues soon? I think this is something vital.
EDIT: FYI: this fixed it: tar -C / -zxvf /var/cache/pacman/pkg/libjpeg-6b-6-i686.pkg.tar.gz usr/lib/libjpeg.so.62 usr/lib/libjpeg.so.62.0.0
Last edited by aardwolf (2009-08-17 16:43:14) -
Wireless issues after kernel update
Hi,
after I updated my kernel yesterday, I've been having some issues with my wireless. I'm on a dell inspiron 1545, using kde and I use the broadcom-wl driver form the AUR.
Anyways. After I did a system update yesterday, it would refuse to load the wl module. So I recompiled the driver and that was fine. But still my laptop refuses to use its wireless card. At first I just couldn't connect to any wireless, now the networkmanager just claims that my WLAN Interface is unavailable.
the output of iwconfig:
lo no wireless extensions.
eth0 IEEE 802.11bg ESSID:"" Nickname:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Bit Rate:54 Mb/s Tx-Power:off
Retry min limit:7 RTS thr:off Fragment thr:off
Power Managementmode:All packets received
Link Quality=5/5 Signal level=0 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
eth1 no wireless extensions.
but if I try to run 'iwlist eth0 scan' it states:
eth0 Failed to read scan data : Invalid argument
I'm not that experienced with wireless, so I did what https://wiki.archlinux.org/index.php/Broadcom_BCM43XX says and some other pages I found on google. 'iwconfig eth0 up' doesn't have any influence.
As I said, before the upgrade it worked fine and I also had configured it as it is described in the link above.
thanks for any inputs,
tobilitemotiv: 'lspci | grep Network' :
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
.:B:. : I guess (and hope) that's the only relevant part (at the top and bottom):
at the bottom what's that "wl taints kernel"
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
input: PC Speaker as /devices/platform/pcspkr/input/input1
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
lib80211_crypt: registered algorithm 'TKIP'
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
sr 1:0:0:0: Attached scsi generic sg1 type 5
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
uhci_hcd: USB Universal Host Controller Interface driver
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: acpi_idle registered with cpuidle
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SBTN]
ACPI: AC Adapter [AC] (off-line)
Monitor-Mwait will be used to enter C-1 state
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
wmi: Mapper loaded
uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
wl: module license 'Mixed/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
wl 0000:0c:00.0: setting latency timer to 64
usb 1-5: new high speed USB device using ehci_hcd and address 2
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
eth0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
thermal LNXTHERM:00: registered as thermal_zone0
and maybe
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
start_kdeinit (3367): /proc/3367/oom_adj is deprecated, please use /proc/3367/oom_score_adj instead.
sky2 0000:09:00.0: eth1: Link is up at 100 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
tobi -
[solved] X11 desaster after todays update!
Hi!
I have some big problem after todays update of my system. I just installed the new Kernel 2.6.19-beyond (I need this one because of my reiser4 partitions) and rebuild the nvidia module for it. After the usual restart I'm no longer able to start KDM or KDE at all. Whenever I want to start KDE the either by using kdm or startx my computer starts working for about 5 seconds, the screen starts to switch as usual, but than I get thrown back to the console, having a blank screen laft and the computer doesn't react anymore. :shock:
It also stops working immediately and I only can push trhe reset button. This is some fatal problem since I have lots of work that needs to be done. I also switched the xorg.conf to the nv or vesa module but still the same thing happens. I also rebuild the beyond kernel but the same thing.
So can anybody help me with this. I need to get my work done and couldn't find any answer to this. This is very urgent since I already have a schedule that is almost out of control.
Thanks a lot!Thanks for the advice. But I usually delete the cache after a while, so it just happened that I did this a couple of days ago so I don't have the previous kernel in there.
About the Xorg.0.log, I already checked it for any error or warning by using
more /var/log/Xorg.0.log | grep WW
and
more /var/log/Xorg.0.log | grep EE
but there's nothing in there that indicates any problem. Both results don't show any warning or error. Besides that I didn't change the xorg.conf after the update and it worked before....
But thanks anyway for trying to help me out. Do you (or anybody else here) have another idea that I might have not thought of?
So I'm still stuck on this and my working clock is ticking.
I really don't have any clue what this might cause. :?
Thanks! -
[Solved] Problems after recent update
I did update my system at 9 Jan 2015 the first problem was it won't book because the update installed new kernel without updating grub.cfg so far so good (Linux fatal 3.14.28-1-lts #1 SMP Thu Jan 8 21:04:11 CET 2015 x86_64 GNU/Linux).
Next deluge is not working
[amp@fatal ~]$ deluge
[ERROR ] 13:27:57 ui:168 cannot import name integer_types
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/deluge/ui/ui.py", line 149, in __init__
from deluge.ui.gtkui.gtkui import GtkUI
File "/usr/lib/python2.7/site-packages/deluge/ui/gtkui/__init__.py", line 1, in <module>
from gtkui import start
File "/usr/lib/python2.7/site-packages/deluge/ui/gtkui/gtkui.py", line 87, in <module>
from deluge.ui.client import client
File "/usr/lib/python2.7/site-packages/deluge/ui/client.py", line 37, in <module>
from twisted.internet import reactor, ssl, defer
File "/usr/lib/python2.7/site-packages/twisted/internet/ssl.py", line 59, in <module>
from OpenSSL import SSL
File "/usr/lib/python2.7/site-packages/OpenSSL/__init__.py", line 8, in <module>
from OpenSSL import rand, crypto, SSL
File "/usr/lib/python2.7/site-packages/OpenSSL/rand.py", line 9, in <module>
from six import integer_types as _integer_types
ImportError: cannot import name integer_types
[ERROR ] 13:27:57 ui:169 There was an error whilst launching the request UI: gtk
[ERROR ] 13:27:57 ui:170 Look at the traceback above for more information.
Also
[amp@fatal ~]$ sudo pacman -S python2
warning: python2-2.7.9-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Packages (1) python2-2.7.9-1
Total Installed Size: 70.03 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [##########################################################################################################################################] 100%
(1/1) checking package integrity [##########################################################################################################################################] 100%
(1/1) loading package files [##########################################################################################################################################] 100%
(1/1) checking for file conflicts [##########################################################################################################################################] 100%
(1/1) checking available disk space [##########################################################################################################################################] 100%
(1/1) reinstalling python2 [##########################################################################################################################################] 100%
ldconfig: File /usr/lib/libKF5PlasmaQuick.so.5.6.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5Package.so.5.6.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5PlasmaQuick.so is empty, not checked.
ldconfig: File /usr/lib/libKF5Package.so.5 is empty, not checked.
ldconfig: File /usr/lib/libzvbi.so is empty, not checked.
ldconfig: File /usr/lib/libKF5ThreadWeaver.so.5 is empty, not checked.
ldconfig: File /usr/lib/libzvbi.so.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5ThreadWeaver.so.5.6.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5Package.so is empty, not checked.
ldconfig: File /usr/lib/libzvbi.so.0.13.2 is empty, not checked.
ldconfig: File /usr/lib/libzvbi-chains.so.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5ThreadWeaver.so is empty, not checked.
ldconfig: File /usr/lib/libzvbi-chains.so.0.0.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5Plasma.so.5 is empty, not checked.
ldconfig: File /usr/lib/libzvbi-chains.so is empty, not checked.
ldconfig: File /usr/lib/libKF5Plasma.so.5.6.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5Plasma.so is empty, not checked.
ldconfig: File /usr/lib/libKF5PlasmaQuick.so.5 is empty, not checked.
I tried many thing posted here and there without luck, please advice.
Thanks!
Last edited by nforced (2015-01-12 20:49:47)nforced wrote:I did update my system at 9 Jan 2015 the first problem was it won't book because the update installed new kernel without updating grub.cfg so far so good (Linux fatal 3.14.28-1-lts #1 SMP Thu Jan 8 21:04:11 CET 2015 x86_64 GNU/Linux).
If you just installed it, then you need to update grub with os-prober/grubmkconfig.
If you had it installed previously, had a working grub entry and then updated to 3.14.28-1-lts, then we'll need to look into what is going wrong.
nforced wrote:
Next deluge is not working
[amp@fatal ~]$ deluge
[ERROR ] 13:27:57 ui:168 cannot import name integer_types
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/deluge/ui/ui.py", line 149, in __init__
from deluge.ui.gtkui.gtkui import GtkUI
File "/usr/lib/python2.7/site-packages/deluge/ui/gtkui/__init__.py", line 1, in <module>
from gtkui import start
File "/usr/lib/python2.7/site-packages/deluge/ui/gtkui/gtkui.py", line 87, in <module>
from deluge.ui.client import client
File "/usr/lib/python2.7/site-packages/deluge/ui/client.py", line 37, in <module>
from twisted.internet import reactor, ssl, defer
File "/usr/lib/python2.7/site-packages/twisted/internet/ssl.py", line 59, in <module>
from OpenSSL import SSL
File "/usr/lib/python2.7/site-packages/OpenSSL/__init__.py", line 8, in <module>
from OpenSSL import rand, crypto, SSL
File "/usr/lib/python2.7/site-packages/OpenSSL/rand.py", line 9, in <module>
from six import integer_types as _integer_types
ImportError: cannot import name integer_types
[ERROR ] 13:27:57 ui:169 There was an error whilst launching the request UI: gtk
[ERROR ] 13:27:57 ui:170 Look at the traceback above for more information.
Again, did this happen after or before the update? If it happened after the update, could you post a list of packages that were updated?
Also, [ code ] tags please when posting code.
nforced wrote:
Also
[amp@fatal ~]$ sudo pacman -S python2
warning: python2-2.7.9-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Packages (1) python2-2.7.9-1
Total Installed Size: 70.03 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [##########################################################################################################################################] 100%
(1/1) checking package integrity [##########################################################################################################################################] 100%
(1/1) loading package files [##########################################################################################################################################] 100%
(1/1) checking for file conflicts [##########################################################################################################################################] 100%
(1/1) checking available disk space [##########################################################################################################################################] 100%
(1/1) reinstalling python2 [##########################################################################################################################################] 100%
ldconfig: File /usr/lib/libKF5PlasmaQuick.so.5.6.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5Package.so.5.6.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5PlasmaQuick.so is empty, not checked.
ldconfig: File /usr/lib/libKF5Package.so.5 is empty, not checked.
ldconfig: File /usr/lib/libzvbi.so is empty, not checked.
ldconfig: File /usr/lib/libKF5ThreadWeaver.so.5 is empty, not checked.
ldconfig: File /usr/lib/libzvbi.so.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5ThreadWeaver.so.5.6.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5Package.so is empty, not checked.
ldconfig: File /usr/lib/libzvbi.so.0.13.2 is empty, not checked.
ldconfig: File /usr/lib/libzvbi-chains.so.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5ThreadWeaver.so is empty, not checked.
ldconfig: File /usr/lib/libzvbi-chains.so.0.0.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5Plasma.so.5 is empty, not checked.
ldconfig: File /usr/lib/libzvbi-chains.so is empty, not checked.
ldconfig: File /usr/lib/libKF5Plasma.so.5.6.0 is empty, not checked.
ldconfig: File /usr/lib/libKF5Plasma.so is empty, not checked.
ldconfig: File /usr/lib/libKF5PlasmaQuick.so.5 is empty, not checked.
I tried many thing posted here and there without luck, please advice.
Thanks!
Are you using KDE Plasma 5? It looks like that might be related. And what's meant by "I tried many things"? What did you try?
Also, [ code ] tags please when posting code.
Last edited by clfarron4 (2015-01-12 11:53:20) -
SOLVED Key board and mouse fail after last update
Both my wireless keyboard and mouse failed after I updated yesterday. I'm using KNOPPIX to post they both work with knoppix so its not a hardware problem.
KDE 4.1
Logitech keyboard and mouse
Last edited by normc (2008-11-08 00:05:37)Thanks a lot
Just want to add that I had to edit grub at start up and add "single" at the end of the kernel line.
The reason is that switching to runlevel 3 didn't work for me. -
Performance reduced under Bootcamp after EFI update on Macbook Pro Retina
after i upgraded EFI on my retina macbook pro the proformence reduced to unusable. under heavy load under bootcamp windows7. the cpu clock drops and as well as cpu clock. this is the screen shot of gpu clock monitoring from windows u can see the gpu clock is running at 270Mhz at most of the time and trying to be back to 725Mhz(yea, not 900Mhz!) when im running a graphic benchmark at same time cpu will run about 1.1Ghz as well. i noticed that it will run 10-20sec normally then CPU and GPU clock will start dropping. It's almost like speedstep is programmed backwards. My CPU is constantly running at 3.1-3.2GHz, and then as soon as a game loads, it drops to 1.2GHz. I've lost track of how many times I reset the SMC reseting SMC PRAM, reinstalling windows using Bootcamp or even erease the entire drive and start over from network recovery MacOS did not solve this problem. so all the recent games like COD MW3, Starcraft II, BF3,or D3 will only run about about 10 fps as i was playing them with no ploblem before the EFI update.
this is killing me! please help.
im in NY, in this season i dont think is the overheating problem. when i check the temperature, it stays about 80C (fans will run about 4k rpm). but some time heavy loaded Mac OS cpu is about 90 degree but only with 3k rpm fan kicked in.
i did search online, seems that some other people have the same problem with rMBP or MBA 2012.
anyone knows if i take my macbook pro to the store, will those people work at genuines bar help me with this "windows" problem?
thanks!Hey Shadowyani, please take a time and fill a bug report at http://developer.apple.com/bugreporter/ . The machine is useless for me as it is now because I develop and use very GPU/CPU demanding scientific applications, after the update my realtime applications are completely useless as they drop from something like 25fps to 9 fps even on Mac OS X (no SMC reset fixed the issue). In bootcamp the situation is worse, my software runs at 4 fps and gaming turns to be impossible to play as well.
Please let Apple know about the problem, fill a bug report, even if SMC reset once in a while fixed the issue for you (this is not a common behaviour and must be fixed). We paid the price for cutting edge technology.
Apple shall not do a downgrade of the system after few weeks, remember that most of reviews and benchmarks were done BEFORE the EFI Update, so people are being fooled by Apple in this sense. -
My ipod touch will no longer download new apps after I updated via apple store.It freezes now when I attempt to download and blanks the app off entirely . How can I reverse the updates or correct the problem moving forward?
Basics from the manual are restart, reset, restore.
Try those -
Unable to Reboot After Software Update - Unable to Reinstall Mac OS 10.4.10
Hello,
I just bought a Macmini 9 months ago, and I believe I may need to either erase the HD to reinstall the original Mac OS (10.4.10) or else replace it. However, I am not familiar with Mac and don't know how to reformat the disk. Can anyone help?
Each time there is a software update, I experience problems starting up from the HD. After the last update a few days ago, I am unable to start up from the HD at all. I tried using the original install CD 1 to reinstall Mac OS 10.4.10 with archiving. However, I received an error saying "unable to install because there is a newer version already installed." Therefore, I tried to start up from the HD again by pressing Option key at startup, but the Macmini continously turned off by itself without rebooting. I tried reinstalling Mac OS with the erase option, but it failed. After that, the Mac OS install CD1 only gives me the option to reinstall additional applications, but when I select continue, there is not HD shown to install the applications.
Disk Utility First Aid on CD1 was unable to repair the disk. I received the following messages: "Invalid sibling link", "Volume check failed", "The underlying task reported failure on exit", "1 HFS volume checked", "1 volume could not be repaired because of an error."
At the bottom of the page under Disk Utility, the following information about the disk is available. Format: Mac OS Extended (Journaled); Capacity: 111.5 GB (119,690,149,888 Bytes); Available: - ; Used: - ; Number of Files: - ; Owners Enabled: - ; Number of Folders: - .
System Profiler is able to identify type, disk identifier, file system, etc. It shows the volume supports journaling, but is not journaled.
Scan Image for Restore shows Library_Preferences (Empty), and Root applications are all grayed out.
I performed the Apple Hardware Test (ver 3A129) by pressing D at startup. The test ran for 5 minutes and 6 seconds. It reported "No trouble found".
It seems the HD is empty, but the install CD is not offering any options to reinstall the OS, only the additional applications. I believe it is a partition error, but I am not familiar with Mac and hesitate to proceed any further.
How do I reformat the disk so that I can reinstall the original Mac OS 10.4 and 10.5?
Your help is sincerely appreciated. Thanks.Good news!
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing. -
Adobe Application Manager CC not working after last update
Last night I avrived home and sat down to work on my website and other side projects after a long day at work. I opened my application manager and it notified me that it had an update. So naturally I agreed and was excited to see the new upgrade. Sadly after a couple hours of trying to figure things out on to why I wasn't able to access my Adobe Muse and Adobe Application manager after the update I had to give up. I was online with tech support about the issue and was given a link to download the application manager yet again (this would have been my 3rd attempt to do so, and the link that was given to me was outdated). After finding out that this was going to take longer than I had hoped asked if the teck support could help me resolve the Muse issue. I was told that I'd be transfered to the Muse support and never was after an hour or so.
I'm now still stuck not being able to use muse (after a couple re-installs) and not able to use my application manager.
Currently when I lunch my application manager my backgound decktop goes black and the application manager pops up and is white with no options to choose and shows nothing. When I try to use Muse it askes me to log in, and then gives me an error message asking me to please try again later....
Can anyone help, has anyone had this issue before??
(running on a 64bit system, windows 8, Adobe CC Member)Hi LantzDesign,
Could you please follow this step and let me know if it helps.
Rename the OOBE Folder to OOBE.old from this location and relaunch Creative Cloud.
C:\Users\(your Username)\AppData\Local\Adobe
Regards,
Abhijit -
Unable to Log In After Software Update
Hello:
After running Software Update, I am unable to log in.
I found the following support article:
Mac OS X 10.5: Unable to log in after an upgrade install
Article: TS1543
http://support.apple.com/kb/TS1543?viewlocale=en_US
However, upon step 8 of the instructions, the following error appears:
delete Invalid Path
<dscl_cmd> DS Error: -14009 (eUnknownNodeName)
This is actually after an update (not an "upgrade"), so I'm not even sure these are the appropriate steps.
This is the second time that I have been unable to log in after an update. The first time, I attempted to reset the password with the installation DVD; however, this resulted in "No LDAP Master" errors and I installed Mac OS X 10.5 Leopard Server on a second internal drive and configured everything again. After setting everything up on the second install, I was going to reformat the first boot drive. Unfortunately, I'm just back to where I started after running the updates. I'm not sure if having two volumes with Mac OS X Server installed makes a difference in the instructions in the article mentioned above or not.
Another question: Is resetting the password with the installer DVD the same as using the Single User approach ("launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist", "ls /Users", then "dscl . -delete /Users/username AuthenticationAuthority")?
If so, I'll just do that; however, I am hoping that the Single User approach might somehow avoid "No LDAP Master" errors again.
Any suggestions are greatly appreciated.
-Warrenbaltwo:
Thanks! I think a week would have gone by before I realized this on my own.
-Warren -
HP ePrint iOS app no longer finds Photosmart C4780 after app update
I have an HP Photosmart C4780 connected through WiFi to my network but sadly it's not supported by AirPrint on iDevices.
So, I was using HP ePrint Home & Biz iOS app (version 4.1) which was very useful for me as it found the printer and allowed me to print from my iPad/iPhone.
Today I updated the app on my iPhone to version 5 (now simply named "HP ePrint" on the App Store) and after the update, the new version doesn't find my Photosmart C4780 anymore. I did the Activation thing on the iPhone, as it was requested to refresh the list of printer on my network in the All tab, but after Refresh no printer is found.
Still I have the old 4.1 on my iPad (and hopefully in my iTunes library) and the printer is located, I assume, through mDSN as it shows the name specified for this setting.
So, question is: Did you dropped support for Photosmart C4780 on 5.0 release of HP ePrint iOS app? If so, why did't you informed this appropriately on the app update text description in the App Store? A message like "some printers may not be supported anymore" would have been helpul.
If HP ePrint should find Photosmart C4700 series printers and this is an issue, how should we proceed from here?
Thanks.WilliamBPS,
I was not informed that support was removed from the app for certain printers. It may have been lost in the transition to the new updated app. I will deffinitly pass this information along as it is very important that the app supports as many printers as it can. I'll go ahead and take note of your printer model. If I find anything out about this, I'll try to give you an update in this thread.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
Maybe you are looking for
-
I want to jailbreak my ipad 4 but I m doubtfull that it may harm my device. Please suggest me.
I want to jailbreak my ipad 4 but I m doubtfull that it may harm my device. Please suggest me.
-
RFC number is not available in induvidual object service transaction list
Hi All, I created RFC (request for change) for an equipment (ind.object) in CRM 7.0. This RFC number should be available in ind.object service transaction for reference. All other corresponding document numbers like incident, problem, service order c
-
While running facebook ipad is suddenly coming to homescreen
while running facebook app(after latest update on today) sometimes it is minimized and homescreen pops up..any solution?
-
How do I get CS6 to not distort color when using Lion and printing from Epson R2880?
Ever since I up-graded to CS5 , the color has been distorted. It is not an Epson Lion problem because printing from preview or iPhoto the color is perfect. Adobe has known about this problem since January 23, 2012. Their help people have taken over
-
Same Algo for Key and Cipher recommended?
Hi, Can I use different algos for the key i want to use for a cipher and the cipher itself or is it mandatory to use the same algo for both? I don't found any answer for this simple question. regards, Olek