Freetalk ConnectMe latest firmware update

Freetalk Connect Me firmware was updted lately ( around Oct 27th 2011).
Since then my phone rings 3 times and then stops ringing. If I am fast enough, I can answer the phone otherwise goes to my voicemail.
Has anybody else experienced the same issue?

Closing this thread to maintain its integrity.
If you experience similar issues, please do start a new thread!
Thank you and best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

HT3728 Does factory reset go back to latest firmware update.

I have resently updated my airport express to latest firmware. The airport express is configured as an extension to my wifi with an Extreme as main device.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
I have since then tried to do factory reset several times without getting the device up and running again.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
I have not been able to discover the express from my iPad, iPone or iMac again.
Could the reaons be latest firmware update?
Any advice to get it back to normal?
Thanks,
Per

Does factory reset go back to the latest firmware update.
A Factory Default Reset will not affect the installed firmware.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
A solid amber light is unfortunately an indication that the internal power supply inside the AirPort Express is failing, or has failed.
I have since then tried to do factory reset several times without getting the device up and running again.
The AirPort Express has failed, and will need to be replaced.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
This is yet another confirmation that the Express has failed, and will need to be replaced.

Internet stopped working on MBA after latest firmware update. Help please!!!

Internet stopped working after installing the latest firmware update. WiFi still connects to router, our other mac desktop still connects to internet as usual (same network). I can't even re-install the MBA OS since it needs an internet connection!!!
Any ideas?

FIXED.
I swapped our wireless router for a newer one, internet seems to work fine again (we were sent a new one by our internet provider which we never set up until now).

Attempted Iphone 4 update to latest firmware update "failed"

Ive attempted to update the Iphone to the latest firmware update and it has failed 3 times, the final time it looked as though
it worked but stopped and went into new mode to go-back to Restore to old setting. Now it is locked up and asking me for the admin backup password
and everything I've tried is not working.. Not sure what to do at this point.
The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
I'm open to any ideas at this point.
Thanks Artman

Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
Open a Command window and type the command "netsh winsock reset"
Reboot your computer
Disable your antivirus and firewall
Launch iTunes
Connect the phone using a USB port directly on the computer, not a hub
When the phone is recognized in iTunes click on it, then click Restore
If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
If the update completes you are in business
You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

Zen Touch latest Firmware Update...player not connec

I tried installing the latest Firmware update for my Zen Touch (released 2-09).
The player is connected and recognized by Windows and the Media Explorer. However, when I try to install the new Firmware it keeps saying "player not connected".
I tried d/l two different language packages cause I wasn't sure what counted - player language or operating system langauge. Anyway, that didn't make a difference.
So what do I do? I have no idea where to start. It's firmware for the correct device connected through Windows XP.
I have made a firmware update before, which worked fine. After that I updated the media explorer software.
Help is very much appreciated! Thank you in advance.
-tina-Message Edited by tinas on 2-0-2005 08:56 PMMessage Edited by tinas on 2-0-2005 09:00 PM

Perhaps it's worth making sure no software is using the player, so reboot the PC, and turn off the Creative Detector. Then try again.
Are you trying to upgrade to the .0.03 version?

Mid 2006 iMac Boot Problem (Since latest firmware update)

I have a Mid 2006 17" iMac. Ever since the latest firmware update in early December, about every other startup I've been having boot problems. After the white screen with the Apple Logo and the spinning wheel it goes to a blue screen like normal, but instead of the 'Loading Mac OS X' white window popping up it stays blue and the spinning loading wheel starts. I've left it loading for quite a while before and nothing changes. I have to do a force shut off by holding the power button. and then I start it up and it will boot normally.
Any help would be appreciated.
Thanks!

Actually, I think it'san early 2006.

Can't send mail after latest firmware update

My outgoing mail won't go out after the latest firmware update. I have 4 different accounts and none are working. Tried in various locations. Any ideas would be appreciated. Thanks

Was this for 10.5.8???
Others have reported it for 10.6.8 & up...
http://x704.net/bbs/viewtopic.php?f=12&t=6118

My macbook pro screen remains grey after latest firmware update

i just had the update notification for the latest firmware, proceeded to do so, and the screen remains grey, its been more than one hour and still grey, since its a firmware update i don't want to disturb it, but could it be that is taking so long?

Reboot it by pressing the power button down hard to force a shutdown.
If your still having problems, take it to Apple. I hope you have AppleCare becuase if they can't fix it, it's a new logicboard.

TC issues after latest firmware update

Here is the skinny, my TC went through the normal firmware update a bit ago. Wednesday my Internet stopped working, when I use the Airport Utility app it showed the TC online, at first, then it gave me the error that the TC did not have a valid IP. Thought might have been a problem on my ISP's end so I grabbed another router and set it up Internet no problem. Has to be the new firmware right so I pushed the firmware back 3 versions, and still the same thing no valid IP but connected to the Internet but no HDD (Yes it said not a valid IP but connected to the Internet on one wireless PC). Everything else in the house would not connect to the TC they could see it but when you went to connect never asked for a password and I got the spindle of death type deal. I saved my settings and did a hard reset with the button on the back of the TC, started over and rebuilt the connection, same thing happened not a valid IP. I have read that Apple released 3 different firmware updates supposedly the last one works, it doesn't when I load the firmware I get the same error TC does not have a valid IP. I need some help, I have cycled through power down and power up situations over and over. Anyone have any other suggestions?

Need some more info.
What is the modem.. make and model?
Is it both modem and router or just a modem?
What is the actual model of the TC.. the number from the base.. A1xxx where the x are numbers.
The latest firmware is an issue.. that is 7.6.4 and you should go back to 7.6.1
But it does seem hard to get rid of properly.
I want you to do a factory reset not just a hard reset.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Please redo the setup using all SMB names.. that is short, no spaces and purely alphanumeric characters.
eg TCgenx (use actual gen if you want) for base station name.
TCwifi for wireless name. (or TC24ghz and TC5ghz which is well worth naming both bands so you can test more carefully).
Please download and install a v5 utility on a computer if any of them use up to Mountain Lion.
Tell us what OS the computers are running and I can tell you how to install the old airport utility.
Test the TC in bridge to your other router is also a good alternative.

Latest firmware update killed my network, HELP!

so.. I updated the firmware about a month ago when it was first available.. My device is completely stock and i'm not really ready to root nor factory reset it. I reset it before due to an error on the backup assistant screwing with my external sd card (the real issue was the copy and paste error some devices were faced with). I've been through about 4, 32gb externals and the latest sandisk just sent me.. is bad too. :/
But, that's not the issue i'm getting at. Since the lastest firmware update with caller ID, etc.. I've had little to no signal, dropped messages in my house, completely dropped 4G LTE while using GPS.. horrible due to some areas I was in.. slow or lagged device to the point where i've had to restart my device 3-4 times each day in the last week...
Can someone either tell me if there is a quick solution to this or what the next step should be in this process. because this whole "we've retracted the update but are looking into a fix" ** isn't very settling. Since, on Verizon's time.. I'm afraid the next update won't come for a few months..

I am having the same issues described by everyone else (dropped 4G, worse signal, etc.) after the update to MD3.
My wife's phone is identical but without the update and it works fine (like mine did before the update)
WHAT is the resolution to this issue, Verizon? I really don't believe I should have to go down the root-my-phone route and find third party sources to fix this issue. Why can't you just push the old firmware back to my phone?
I am quite disappointed that what was my best smartphone experience to date has been ruined.

Latest firmware update and startup problems

Hi I have been reading all about this so-called firmware and its importance in keeping updated on my new macbook pro. Therefore I have been diligently trying to keep it updated over my dial-up connection. I installed the latest firmware as my automatic update suggested. Now I get the spinning startup circle of death. Tried booting in safe mode to no avail. Help? (I also have version cue installed.)

Hi jbell,
Firmware updates are not availible in Software Update, only sofware updates are. Did you Repair Permissions prior to and after updating software? You always should. Go to Applications-Utilities-Disk Utility, and highlight Mac OS X in the left hand column, then Repair Permissions below. Firmware updates are available here....
http://www.apple.com/support/downloads/macbookproearly2006firmwareupdate101.html
http://www.apple.com/support/downloads/macbookpro15inchsmcfirmwareupdate.html

Latest firmware update and more problems with 30" external displays?

Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update?

Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update?

After latest firmware update, AppleTV2 no longer sends signal

So I updated my AppleTV2 with the latest firmware, and now it no longer sends a signal out.
Has Apple stated when they're going to fix this?

MicroUSB cable doesn't fit in AppleTV2. Try again.
Edit: Apparently the MicroUSB cable I was trying to use wasn't 'micro' enough.
I'm now trying again with a MicroUSB cable used to recharge my Xbox 360 wireless headset. Heh... the irony is amusing.

New symptoms since latest firmware update

OK I have a 1tb sky hd box which hasn't had any really annoying issues up until the new firmware update (the one with the new Kids tile which is annoying in its own right). Anyway, I have been watching the cricket on SS2 and every so often when they break for a short advert between overs I've lost sound when it tries to revert to DD5.1 after switching from 2.0 on the adverts. I have to change channel and back again to get the sound back. Also, for the first time, my planner was showing empty today so I had to do a planner rebuild which solved the issue. Still, at least they seem to have solved the sound dropout issue. So just heads up for anyone else with a 1tb box who experiences the same issues.

(Quoting Karl Petersen here:)
There's a bug in iMovie 6 that makes it impossible to re-edit (Update) photo clips previously imported with the Ken Burns checkbox ON. The source photo, normally stored in the Media folder of the project, is (inappropriately) discarded when you empty the iMovie trash. The clips Update as black clips and the preview is usually black too, if I recall.
The workaround is to 1) drag the photo from the iMovie trash to the iMovie Clips pane; or 2) never empty the iMovie trash.
Sue

Anyone NOT having problems with ITunes 8 and latest firmware update???

I have really been put off updating to ITunes 8. The firmware update appears to be doing well. Is there anyone that uses a MacBook like myself who have had absolutely NO problems with new Itunes and firmware update? Answers on the back of a £50 note....

Not having issues now that I have updated all i(hardware) firmware to version 2.1, two phones and an iPod Touch, all work fine (So Far) (knocking on wood). As far as iTunes goes I have mixed feelings. It's a bit faster and more stable, however they removed the "Burn CD" ability from the software. That blows a bit as I would make CD's from some of my play lists to play in the car. Yes I can dock my devices in the car, but as a matter of convenience it's easier to fire up the CD when your in a rush.

Freetalk ConnectMe latest firmware update

Similar Messages

Maybe you are looking for