Freetalk webcam works on Panasonic 2010 version (V...

According to Panasonic support website, the freetalk camera is released also with older Panasonic 2010 version (VT20)
while according to skype shop it works only with the Panasonic 2011 version (VT30)
Who is right ?

The skype shop is promoting the sale of the Panasonic Blu ray player (BDT110) and Freetalb webcam as compatable components with eachother to be used with Skype, however the video does not trasmit from the webcam (i.e. only audio) so video calls are not possible. I recommend that Skype contact its Freetalk partner to troubleshoot these issues (i.e. webcam compatability with Panasonic tvs and blu ray players) because the claims made on the Skype Shop pertaining to the functionallity are not entirely accurate.

Similar Messages

Office Plug-in : support for MS Office 2010 version

We tried to use the Office Plug-in that is available with OBIEE version 10.1.3.3.2 for MS Office 2010 version.
It does not work and throws an error message that indicates Office 2003 or Office 2007 are the versions that are supported.
Questions:
1. Is there a patch available for this plug-in that will work with Office 2010 version?
2. Does OBIEE 11.1.1.3 (Current release) support Office 2010 through the plug in? If not any insight into when Office 2010 is supported by the OBIEE Office Plug-in
Also, I heard that Office Plug-in and Smart View are going to be merged into a single product in the future releases... any thoughts on this as well.
Thanks
Sundar

We raised a support log few weeks back on this. The answer Support gave:
At the moment, Office 2010 is not certified against the current release of OBIEE 10.1.3.4.1 and OBIEE 11.1.1.3.0
Oracle is planning on Supporting MS Office 2010 on with BI 10.1.3.4.2 and 11.1.1.4.0. No official eta's for the releases at this stage.

Freetalk webcam for Panasonic products ( tv, blu r...

I purchased a Panasonic Blu ray player and freetalk webcam from the Skype shop website and only the audio (no video) is being transmitted from the blu ray player on Skype. Skype, Panasonic, and Freetalk have no explaination for my issue, so I would like to know if anyone is successfully using the Freetalk webcam or if I should look to purchase the Pansonic brand webcam for my Panasonic blu ray player to use with Skype.

I followed this link and it worked perfectly for my Freetalk webcam and Panasonic Plasma TV:
Re: Panasonic Blu Ray Player & Freetalk Conference webcam[ New ]
Options
2 weeks ago - last edited 2 weeks ago
Hi Everyone,
eBuyNow would like to thank everyone for their posts and for being so patient while working hard to find a solution for the compatability issue some people were experiencing with their FREETALK Conference HD camera working with their Panasonic Blu-ray player or Panasonic TV. The firmware version of some cameras was the reason for the issue. Please follow the simple steps below to update the firmware version to 2703.
Step 1
Use a Windows XP or Windows 7 PC.
Go into link: http://freetalk.ebuynow.com/us/ebuynow/web-cameras/tv-webcams/freetalk-conference-hd-camera-for-panasonic-tvs.html
Step 2
Scroll down to about half the page and click on the tab “Downloads”.
Step 3
Click on "Update your firmware"
Step 4
Save the Binary File onto your desktop
Step 5
Plug the Camera into the Windows PC’s using any available USB port
Step 6
Click to open the Binary File you had saved
A pop-up/ dialog box will open on your screen “Freetalk Conference Firmware Update” – ensure that your pop-up blocker is off
Step 7
Click “Update Firmware” button
(When the Firmware update is successful, the text “Reload Complete” will appear in the white box at the bottom of the dialog box. The firmware update process is now complete)
Step 8
Unplug the camera from the Windows PC
You may now follow the steps of connecting the camera to your Panasonic TV or Panasonic Blu-ray player and enjoy Skype video calls from your TV!
Best regards,
eBuyNow Support Pro

The application uninstaller ,created with Labwindows CVI, doesn´t work after upgrading to 2010 version

Hi,
I have been working with Labwindows CVI 2009 with no problem but after upgrading to 2010 version I have the following problem:
When i´m going to execute the unistaller, either from Windows Control Panel or directly from the uninst.exe icon, it doesn´t work. The PC thinks a few seconds and does nothing, and it happens with all the applications I build with Labwindows CVi 2010.
Thanks,
Asier
Solved!
Go to Solution.

Hello -
Are you installing these distributions on a non-English operating system? If so, the first thing to try would be the workaround listed on this known issue.
The known issue only lists Italian OSs as the troublesome OS, but it could actually happen on many different non-English OSs. I will update the text accordingly the next time I update the known issues list.
NickB
National Instruments

We have moved to another city and we would like to communicate to our friends and family back home via Skype. What webcams work well with our home computer, a vintage 2005 Mac mini with Mac OS X, version 10.5.8?

We have moved to another city and we would like to communicate to our friends and family back home via Skype. What webcams work well with our home computer, a vintage 2005 Mac mini with Mac OS X, version 10.5.8?

You 2005 mini shipped with a PowerPC G4 CPU ranging between 1.25 and 1.5 (late sept 2005) Ghz. PowerPC is not Intel. This mini will not run current releases of Skype for the following reasons:
The current version of Skype claims support for OS X 10.5.8 -- but wants a 1Ghz Intel processor just for voice calls. Their recommendation for video calls is a 1.8Ghz Core 2 Duo Intel CPU and a broadband connection of at least, 4Mbps down and 512Kbps up. Skype requirements.

Hi I can't get my 2010 version of PSE to work on my Mac, which just got a new hard drive. running OS X 10.9.3

Does anyone know how to reboot this or re-download? It doesn't seem obvious ...

What do you mean by "2010" version? Which version of PSE is this? And did you try to move it back to the new drive via Migration Assistant or something like that?

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

Windows 8.1 64bit. Webcam works with "Camera" app ...

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas???
OS: Windows 8.1 64bit
Memory: 32GB
WebCam: Microsoft VX-7000.
As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter).
Already attempted:
1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.
2) Close (from taskmgr) anything that looks like it might use Webcam.
3) Run Skype for Desktop in Windows 7 and 8 compatibility modes
None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam".
I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it
Thanks,
- Matt Symes

I have 6 USB3.0/2.0 ports on the rear panel of the motherboard and the camera is connected to one of these.
I also have 2 USB 2.0/1.1 ports on the front panel of the PC connected to the motherboard (it's an old PC case!) I've tried using these with the webcam and there is no difference (i.e. works in "Camera" app - not in Skype)
TI've generated and attached the log file as requested.
Thanks for your assistance in this issue.
Attachments:
debug-20140217-1602#1.zip ‏922 KB

RoboHelp for Word installed from RoboHelp 10 won't work with Word 2010

I have a Help project created in RoboHelp for Word 8. I recently upgraded from Word 2007 to Word 2010 and discovered that RH8 for Word won't work with Word 2010. So I purchased RoboHelp 10 and have installed RoboHelp for Word from it. Alas, RH for Word STILL won't work with Word 2010. When I try to open my project, I get this message:
Before I bought RH10, I live-chatted with an Adobe sales person who assured me it was compatible with Word 2010.
BTW, I tried to roll back to Word 2007, but I was getting weird behavior running Word, so I have reinstalled Word 2010 and want to stay there.
Any ideas?

I have just installed Rh10 for Word on a new machine and initially I got this message.
I wonder if you have followed those instuctions? I changed the setting to Enable All.
The other possibility is what do you have set for the default version? If it is 2007 and that no longer exists on your machine, then Rh will not be able to proceed. The dropdown should show 2010
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

GPU basic features stop working after updating from version 13.0 to Photoshop version 13.1

My Basic GPU features were working flawless with Photoshop version 13.0 After I update to version 13.1 for CC members all my GPU features stop working. Is there a form to set my Photosop version 13.1 in order to use my GPU features or there is a huge difference between versions that doesn't allow me to use the GPU features? Note: I Already update my graphics card driver

Thanks for your response! these are the data that my photoshop display Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:15, Stepping:13 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2161 MHz
Built-in memory: 3001 MB
Free memory: 1383 MB
Memory available to Photoshop: 2472 MB
Memory used by Photoshop: 81 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: False.
OpenGL Allow Advanced Mode: False.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Unavailable
OpenGL Version: 2.1
Video Rect Texture Size: 4096
OpenGL Memory: 1308 MB
Video Card Vendor: Intel
Video Card Renderer: Mobile Intel(R) 4 Series Express Chipset Family
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 2
Video Card: Mobile Intel(R) 4 Series Express Chipset Family
Driver Version: 8.15.10.2869
Driver Date: 20121004000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode:
Video Card Caption: Mobile Intel(R) 4 Series Express Chipset Family
Video Card Memory: 0 MB
Video Card Number: 1
Video Card: Mobile Intel(R) 4 Series Express Chipset Family
Driver Version: 8.15.10.2869
Driver Date: 20121004000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: Mobile Intel(R) 4 Series Express Chipset Family
Video Card Memory: 1308 MB
Serial number: 91190152077705349988
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Aaron\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
D:\, 69.6G, 38.3G free
H:\, 465.1G, 335.2G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/09/10-12:31:21   5.0.4   79.517869
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1686
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
   BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.1.0.20577   2.1.0.20577
   CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   2.1.2.1681
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
Required plug-ins:
   3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   Angled Strokes 13.0
   Average 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Bas Relief 13.0
   BMP 13.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Collada 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Embed Watermark 4.0
   Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Extrude 13.0
   FastCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Maximum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mean 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Measurement Core 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Median 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mezzotint 13.0
   Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Picture Package Filter 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Pinch 13.0
   Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Range 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.1.2
   Shear 13.0
   Skewness 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   STL 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Sumi-e 13.0
   Summation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Variations 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Viveza 2 2.0.6.16608
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   WIA Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Wind 13.0
   Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   ZigZag 13.0
Optional and third party plug-ins:
   Camera Raw 7.4
   Color Efex Pro 4 NO VERSION
   Color Efex Pro 4 NO VERSION
   Nik Selective Tool 2.1.3.17256
   Portrait Professional 1, 4, 1, 0
   Topaz Adjust 5 10.0
   Topaz BW Effects 2 10.0
   Topaz Clean 3 10.0
   Topaz DeJpeg 4 10.0
   Topaz DeNoise 5 10.0
   Topaz Detail 3 10.0
   Topaz InFocus 10.0
   Topaz Lens Effects 10.0
   Topaz ReMask 3 10.0
   Topaz Simplify 4 10.0
   TopazRemaskAutomate NO VERSION
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE please note that with the same configuration or hardware everything related to my basic GPU usage was working flawless with the version 13.0 and that was a few hours ago! thanks again!

OWA stopped working on Exchange 2010

OWA stopped working on Exchange 2010
Outlook connected to Exchange sync and Activesync work fine.
Series of events – Exchange service stops without reason, then Receive connector disappears, after that Send connector disappears; now QWA does not work. Between each event – a day or two interval.
In OWA folder there are 3 subfolders with different versions - 14.1.421.2 (currently active), 14.1.438.0 etc. There is no access online to OWA now. Earlier there was a message of missing theme – I’ve copied theme from later version folder, now there is no connection
and no message.
What is the best way to fix OWA, or to delete existing and install new OWA with default settings without uninstall Exchange server.
I can't access using IP address.
Everything was working previously, and then just problems started one after another. Windows update in the middle - I was trying to uninstall, but problem started before first windows update. Another probable cause - Backup Exec 2012 agent - I've cancelled
it for now.
There were two roll-ups in ththese windows updates. I was able to uninstall one of them (8), but roll-up 7 is unable to uninstall.
It is just a blank page now.
When I try using IP address, the error is
"Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; WOW64; Trident/4.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.30729; .NET CLR 3.5.30729)
Timestamp: Tue, 17 Dec 2013 05:02:13 UTC
Message: Syntax error
Line: 1
Char: 1
Code: 0
URI: https://10.0.0.191/owa/auth/logon.aspx?url=https://10.0.0.191/owa/14.1.421.2/scripts/premium/flogon.js&reason=0"
No errors for OWA in Management Console, can't find any explaining events in Event Viewer.
The main question is - how can I get rid of multiple versions in c:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\ and create something workable

Hi,
Have you tried access OWA on CAS server via https://localhost/owa?
If not, please check IIS log and see the related error message.
Regards,
Rebecca Tu
TechNet Community Support

Error 1 when building my application in Labview 2010 Version 10.0f2

I am getting the following error trying to build my application in Labview 2010 Version 10.0f2 and I get the following error:
Error 1 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
=========================
NI-488: Command requires GPIB Controller to be Controller-In-Charge.
Method Name: Linker:Write Info To File
I have searched and can find no real sollutions to this problem. I did the updates and still nothing. Now I can't even build an app with Laview 8.6. I reference several .NET items and refuse to rebuild each and every one of them. My only option at this point is to uninstall all Labview and then reinstall 8.6 so I can do something.
Help if you can.

Hello RBrown
I am really sorry for this inconvenience! This is a known issue.
Can you please attempt the following for me:
When you are building an application, under Advanced please check the last box "Use LabVIEW 8.x file layout"
If that doesn't work, you may need to rebuild the LLB in a separate directory with new names, and use it as the build inclusion.
Here are some forum posts strictly for your information:
I have found users that have had similar issues. I am trying to make this workaround work for you.
http://forums.ni.com/t5/LabVIEW/error-1052/m-p/912192
This is a known issue that some customers have already commented on:
http://forums.ni.com/t5/LabVIEW/NI-Please-don-t-put-illegal-vi-names-in-your-toolkits-thanks/m-p/745...
I have filed a corrective action for this issue and I will add you to the list of individuals who need this issue resolved.
Sincerely,
Greg S.

Why doesnt installing the latest or even the Mar 2010 version of Machine Vison over LV 2010 SP1 not show up Imaqdx USB options

I have LV 2010 SP1 developers package running on Windows XP. I wanted to add IMaQ to it and bought that option also just a few days ago. I tried installing both the 2010 version of IMaQ, IMaqdx (Machine Vision March 2010) as well as the latest version of IMaQ from the DVD (I understand from the compatibility charts, this is not an issue). Whatever I do, I dont see IMaqdx USB communication icons in the Vison and Motion functions. I tried using example programs as well as the existing camera controls in the NI-IMaqdx but there is a communication error. On the other hand, when I open an evaluation version of machine vision 2012, I can see this USB camera and communicate with it. I tried downloading the USB_graphics file listed and extracting it with the /x option which also didnt work. Can anyone tell me what I need to do to communicate with this USB camera ? I can try using a firewire camera but I wanted the option of several cameras hooked up to this computer. Thanks.

Hi there,
So to investigate this issue, we usually want to check if the camera works in Measurement & Automation Explorer first. This is the software that confirms that hardware is working with NI's drivers. You can open it by going to Start >> Program Files >> National Instruments >> Measurement & Automation Explorer.
Then, expand My System >> Devices & Interfaces >> NI-IMAQdx Devices, and then you should see your USB camera. Confirm that you can "Snap" and "Grab" here.
The other thing I can think of is that the March 2010 version of Machine Vision came out a year before LabVIEW 2010 SP1. Do you know what the CD has on it?
Ravi A.
National Instruments | Applications Engineer

Does Visio 2013 work with Office 2010?

Does Visio 2013 work with Office 2010?

Tuesday 01/06/2015
Take a look at this Microsoft KB
KB2784668
It has one reference to Visio and the support / install order of Office.
Now with that said, regardless of 2010 vs. 2013, you can NOT mix 32-bit or 64-bit versions of Office.
For example, lets say I installed Office 2010 SP2 64-bit
(FYI... How to determine Office 2010 SP file version
KB2121559)
I then want to install Visio 2013 32-bit, the install will not work.
You cant mix 32-bit and 64-bit versions of Office Products.
TechNet article explains more...TechNet
(FYI...A few more people are asking the same question...)
Forum 1
Forum 2
(How to determine which version 32-bit or 64-bit version of Office is installed
Stackoverflow.com)
Above article is dependent on Full Office being installed... You can also query the DisplayName REG_SZ key as well, it will report back the Office version.
Registry Location:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall
Look for the Office GUID in my example for 2010 64-bit SP2....
Now with the above said, below are notes from one of our desktop support techs in regards to issues we have seen internally running Office 2010 32-bit SP1 and SP2 on Win 7 x64 Enterprise with Visio 2013.....
Office interops. The ability for office and other applications to communicate with other office apps.
The first instance today: User sends corporate communications from word using the send to mail recipient feature. After visio 2013 installed, he received a message stating that word could not communicate with outlook, to either repair office or check the
server. Office was repaired, new outlook profile created. After research, discovered the office is sensitive to various versions in regards to interops. Discovered that Visio 2013 was installed around the time user experienced issues. After uninstalling visio,
when launching word it began to configure (like for a first time install), the send mail to recipient feature began working. This probably will affect anyone with visio 2013. Visio 2010 was not reinstalled afterwards, as user barely uses it and was hesitant.
Installation files are still on his machine in the event that he does need it reinstalled. Office version is 14.0.7109.5000 User is on Office 2010 SP2
The second instance today: Teammate stopped working 3 weeks ago according to user. After working through several support groups here and working with the vendor support, the vendor noted that some dll’s from the application were not registered. If that didn’t
fix it they suggested a reimage. After registering the dll’s, issue persisted. After further troubleshooting, determine that the feature that did not work for user consisted of teammate downloading information from a system, parsing it, then outputting it
to a word document. The application provided no error of any sort, it just would never get to the word document portion. Discovered that Visio 2013 was installed around the time that the issue occurred, and that the issue appeared to be related to office interops.
I uninstalled Visio 2013 and it began working as designed. In both cases Visio 2013 had been installed on 11/25/2014 (I didn’t see any corporate communication about an upgrade, but maybe one took place?). Office version is 14.0.7109.5000 User is on Office
2010 SP2
I’m not sure if you have much experience with interops, but pretty much anytime you want to communicate with a different office application, that is how it is done. Per my reading through various Microsoft KB’s and support forums, different version interops
do not play well together always. It appears that these applications are trying to communicate to office 2010 (v 14) using 2013 (v15) interops, only after installing visio 2013 professional. Users were both Windows 7 x64. We also had a group of several users
who also ran into issues with sharepoint not working in any browser, turned out the problem was Visio 2013 was well....
Feel free to research more, but my own research comes down with having both 2010 and 2013 interops on the machine. To simplify it, the applications and office apps are being told to communicate using office 2013, and but only listen in 2010, causing problems.
Its not causing problems with every simple interop, or we would see it far more widespread, but we are going to continue to see the “ghost” issues where Visio 2013 is the root cause, but nothing is really going to scream it.

Order New 2011 Airs or 2010 Version

I am looking at buying a 11" Macbook Air for my wife and 13" Macbook Air for myself. MacMall is doing great deals on the 2010 version. So I'm wondering if I should save money and buy the 2010 versions or order the new versions with 256 gb hard drives and the i7 processors. How does Lion perform on the 2010 versions? If I bought the older versions, they would both have 4gb of ram. My wife will be using hers for iPhoto, Safari, e-mail, movies etc. I'll be using mine mainly for writing and also Logos. I have another laptop, a PC laptop I use for work (fully loaded HP DV6 with i7 etc.).
Any advice would be appreciated.

I'm kinda torn on this one. I have the 2010 Air. I actually bought it after the 2011 came out and places still had 2010 stock. At the time, I was concerned with the possibility of the intigrated GPU in the 2011 model being underpowered (vs. the dedicated GPU in the 2010 Air). I was also seeing quite a bit of comments regarding heat with the 2011 Airs (my 2010 runs quite cool). I'm not really sure if that was due to the GPU/CPU integration on the 2011 model, or some other cause... but there just wasn't enough info at the time to make me comfortable with the 2011 model. I have installed Lion on my Air without any issues (whether or not I like Lion is another story... but it does run on the 2010 model without a problem).
Having said all that... I have considered from time to time upgrading to the 2011 model. Now that it's been out for a while, most people seem to be fairly happy. I did notice a lot more comments here in the support forums for the 2011 models though. We used to see maybe 10 or 15 comments a day (which is practically nothing). With the introduction of the 2011 model, we're seeing about as many comments as we do for the MB Pros. I'm not sure if that's indicative of there actually being more problems or if sales have skyrocketed. I know many of those posts are also more related to Lion than the Air itself.
If you were talking about making the decision between the two and paying the same price, I'd definately go with the 2011 model. You get the backlit keyboard, more powerful CPU, and the (as of yet underutilized) Thunderbolt port. However, if you're getting a great deal on a 2010 model, for your wife's usage (as you've indicated it to be), the 2010 will be fine. As I had indicated, it runs Lion just fine, but you'll also have the option to keep it with Snow Leopard if you wish which would be a major benefit for many. Snow Leopard is not an option for the 2011 model.

Freetalk webcam works on Panasonic 2010 version (V...

Similar Messages

Maybe you are looking for