Freeze during editing

When I edit in full screen, I lose the ability to open up the bottom "toolbar" by dragging the cursor to the bottom of the screen.
When this happens I have to hit the escape button to get back to the iPhoto library.
When I go back to editing the photo, none of the changes (edits) are saved.
Any idea what could be causing this issue. It happens quite a bit.
Thanks in advance.

Russell
When I edit in full screen, I lose the ability to open up the bottom "toolbar" by dragging the cursor to the bottom of the screen.
Do you mean the iPhoto toolbar? If so, try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
When I go back to editing the photo, none of the changes (edits) are saved.
They won’t be saved until you click on Done or the Next arrow.
Regards
TD

Similar Messages

Freezing, Application Ending while using PSE 12 during editing.

Good afternoon, I'm using PSE 12 and the application keeps on freezing and ending during editing. Just purchased a new MAC laptop that is running Yosemite 10.10. Any advice? Thank you in advance.

CSanchez98
If your program is Photoshop Elements 12, you have posted in the wrong forum. Your thread has somehow been posted in the Adobe Premiere Elements Forum (video editing).
Please repost your thread in the Adobe Photoshop Elements Forum
https://forums.adobe.com/community/photoshop_elements
or wait for a moderator here to see your thread here and move it from here to there.
Much has been written about Photoshop Elements 12 on Mac Yosemite 10.10 and the good people in the Adobe Photoshop Elements Forum should be
able to advise you with the best information possible on this matter.
ATR

Answers Freezing during dashboard editing

Hi,
We're currently experiencing intermitent Answers "freezes" during dashboard editing. The session has to be closed and logged in again. This is causing a massive perception issue before the service goes live.
The only errors I can see are in the saw.log - no errors are seen in the nqserver.log/nqserver.log. The only relevant errors I can see are as follows:
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 46066] Operation cancelled. (HY000
and
R access denied for user HITCHIM to path /
--------------------

Hey there user635059,
When you say "freeze", I guess the links/buttons all stop responding and the page just sits there, yeah?
Do you get "freezes" during any other aspect of OBI operation? - e.g. viewing reports in a dashboard, creating reports in Answers, etc. This is only happening when you're editing a dashboard?
A.

Premiere CC 2014 freezes while editing

I'm not sure how common this is, but I know others have complained about Premiere CC 2014 crashing their systems. For me, it freezes after editing for a while. During playback the video will freeze while the audio continues. Eventually the entire program will crash.
Its a shame because there is no way to export this project to Premiere CC, but I can't work this way. Does anyone know a fix for this?
2.8 GHz Intel Core i7
16GB DDR3
Never had any trouble running any other application on my system. My coworkers have the same issue.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

MDD DP G4 elusive diagnosis - freezes during boot up. Tired- HELP!

After not using my Dual Bootable DP 1.25 GHz MDD G4 for a couple of months, it's now freezing during the boot process.
What's weird is that it boots in Target Mode just fine, and when connected in this mode to my G5 Quad, it actually boots the G5 Quad in Target Mode just fine! The G4 drive shows in fact as the boot drive on the G5 Quad's monitors.
I was able to boot off a retail Tiger 10.4.6 disk, so I did an erase and install of a fresh Tiger OS 10.4.6, which I promptly updated to 10.4.11. After trying and failing umpteen times to boot off the HD, even in safe mode, I ended up being utterly unable to get either of the Super Drives to open normally, so I had to resort to the straightened paper clip trick to retrieve the install DVD.
Now even the paper clip fails to open either of the optical drives.
I have twice wiped the HD from the G5 Quad after booting up in Target Mode, and installed fresh copies of Tiger 10.4.11 as described, with the Tiger install DVD in the SuperDrive of the G5 Quad.
Since in Target Mode the G5 Quad boots just fine of the G4 HD, I think I can rule out the Hard Drive.
I think I can rule out the battery too, as it boots fine in Target Mode and in the regular boot process it sometimes gets as far as playing the OS fresh install music after going through the registration process.
I do have the original install disks with AHT 2.0.2 that came with the G4, but I can't get the optical drives open to insert the disk in either one of them.
I'm thinking it could be bad RAM, but why would the optical drives be stuck, both of them??!
I'd be most grateful for any tips as to what to try next.

Jump all hard drives Cable Select and place the intended Master on the end connector of each IDE ribbon (each bus).
Can you clarify, please? Are you referencing the actual CPU?
Yes. A very fine layer of corrosion on one or more of the 300 pins could render the machine incapable of achieving logic.
The step should be performed after doing all the other reseats that I suggested.
I've never re-seated one,
Not so difficult.
Replacement of the thermal compound is a requisite part of the proceedure, however.
Use Arctic Cooling MX-4.
No worries if a bit too much is applied, unlike silver based compounds....... bzzzZZTT! Dead CPU.
My tutorial:
9AE7FE0E-0CF2-4A7C-8003-489B282582BC.html
I posted this for someone who wanted to remove a MDD logic board (edited for clarity, I hope):
To remove the logic board (of a MDD):
-Disconnect all cables connected to the logic board.
-Remove any PCI cards, and RAM.
-Find and remove the five screws that hold the heatsink. Remove the heatsink.
-Remove the processor board by lifting the edges of the daughter card. After successfully pulling the card free from the connector, it might help to slide the processor board a bit to the rear and/while lifting out, being careful to clear the two mounting pegs.
-Find and remove the one screw that holds the logic board.
-Slide the logic board away from the back panel, lifting to avoid the chassis hooks.
You need to pay attention to the three steps in bold. There is no screw retaining the CPU daughter card. It is sandwiched between the heatsink and the logic board socket.

[Solved]Computer slow down and freeze during data transfer syncing

Hello,
Everytime I make a data transfer, my computer slow down, and sometimes freeze during a few seconds, work for a fraction of seconds and freeze again. I don"t understand why.
As an example, here is a bench of files i transfered during a syncing with Grsync
It took about 12h to sync 64Gb.
I've read a lot of topics talking about this problem but nothing works. I tried to switch off the SWAP and setting the vm.dirty_ratio and vm.background_dirty_ratio but nothing works.
I'm making the trasfer between two Western Digital USB 2.0 external hard drive in NTFS.
Does anyone know how to fix this?
Thanks in advance
Last edited by Neldar (2015-03-04 15:54:29)

It seems it was beacause one of my external hard drive was about to die. I performed the same operation with 2 Western Digital external hard drive 1To USB3 and it works perfectly.

Elements 10 project slideshow freezes during output

Elements 10 project slideshow freezes during output. When writing to CD it freezes about 70%. When output to hard drive is selected, it freezes around 39%. This is a show I have been working on for a few days. It has been working but can no longer use the output feature.
O/S: Windows 7
I downloaded the trial of Premiere and the show outputs without any problems. I don't really want to buy another program. Can anyone think of a solution?

a lot of that didn’t apply and I’m not tech savvy enough to figure the rest out... but. I uninstalled elements and elements premier, I didn’t realize this allows you to de-activate as part of the uninstall process, in e9 I de-activated from the toolbar. I saved my projects folder from my catalog to a disk. When I re-installed everything and loaded my projects I was able to open my slide show. I also “refreshed” my Windows 8 because it was having problems as well.
I attempted to save the slide show as WMV again and again if failed, halfway through playback it froze and kept flickering. This slide show is only 4 minutes long with around 30 photos. I had used a different transition between each photo, I changed all but 2 to fade, this time it worked perfectly. I’m strictly an amateur, learning as I go, I intend to watch tutorials and learn more, but does it say anywhere that using multiple transitions in a slideshow can result in problems? I can’t believe it is my PC, I am using a 2 month old Dell XPS 8500 Special Edition, i7 3rd gen., 32Gb memory, Bluray burner, Radeon 7870 graphics with Windows 8, every driver is up to date.
Thanks for your assistance. Darryl

MacPro 3.1 with GTX285 freezes during playback- too slow?

I´m having issues with my MacPro 3.1 (2008, 10GB RAM, GTX 285 card) and FCPX which always freezes only during playback.
I can edit the whole day without any freezing as long as I do not play back the edit for longer than 1 minute. After about 1.15 of continuos playback the computer will freeze for 45 seconds. The audio keeps playing though but the video will freeze and I cant do anything on the computer. Then video comes back for another minute before it will freeze again. So I can never see the whole edit...
When working with Adobe Premiere CS6 or any other program I do not have the slightest issues and the MacPro is working fine the whole day. I only have this issue with FCPX (10.0.6 and 10.0.7)
I have tried the following so far:
- trashed preferences
- re-installed FCPX
- clean install of the OS (10.8.2) on a fresh HD with fresh install of FCPX (no other programs on the system)
- changed RAM
- Hardware Test with no issues showing
- dropped in my old GT8800 graphic card which seems to be too slow but does not show any real freezes only choppy video playback
- Cuda driver installed and Cuda uninstalled
Could it be that my system is too slow for FCPX? Could the 285 cause the freezing? Does anybody else have this kind of issues? I have to use Premiere Pro CS6 with Cuda for most of my projects, but for quick edits I would love to use FCPX with this machine. What can I do? Any ideas what could be wrong with my system? Any feedback would be highly appreciated.

Tom,
thanks a lot for taking the time to reply. Now I´m even more puzzled knowing that it should work fine on my machine.
I also got the impression that the GTX285 should handle FCPX without any issues and it does on my machine until it freezes. Its quite snappy during editing and can play quite a few effects that need rendering in real time. Strange thing also is that I do not get a dropped frame warning after the freeze.
Regarding your questions:
1) I tried all kind of formats ranging from DV, DVCPRO, DVCPRO50, XDCAM and ProRes. Even tried transcoding and proxy. No matter what format I bring in, the freezing will occur
2) tried transcoding and the original file formats
3) Cuda drivers are up to date. I also tried various older drivers and not installing Cuda at all. Same result all the time unfortunately.
I no longer know what I should do... I´m already thinking about buying a ATI 5770 but I´m also using Premiere a lot which works great with the Cuda cards and I do not want to invest into this old machine - still hoping that a new MacPro will arrive eventually later this year...
Thanks,
Gerald

FIX FOR:computer freezes during install of Leopard on a G4 MDD w/ ATI x800!

I had problems with freezing during installation of Tiger & Leopard on my G4 MDD. It took some trouble shooting, but when I installed Tiger I found out that the freeze was from the video card I had installed, an ATI x800 xt 256mb AGP video card. I do not know why this card freezes the installation process, but I found a way to get the installation to complete without freezing. I took an old ATI PCI video card, installed it in an empty PCI slot, connected monitor to PCI card, and then installed Tiger with no problems. After install I hooked the monitor back up to the AGP ATI card and it worked great. So when my G4 froze with the Leopard installation I did the same thing, switched to an old PCI video card and Leopard installed with no problems whatsoever, then I switched back to AGP card after install. I hope this helps someone.
Message was edited by: jdswier

Thanks for taking the time off to share this information.

Dropped Frames and "freezing" during capture

I'm having a problem capturing video....it mostly captures although I get "freezes" where the sound continues but the video frames are dropped. If I leave the Quit capture upon dropped frames I can't capture too much as the freezing happens about every 15 to 30 seconds. Any help?
I'm having the same problems on both computers and also when I try to set the hard drive as the scratch as opposed to my external HD.
MacBook Pro (INtel)
iMac (800mhz)
FCE 2.0
Thanks in advance
Zack

Tom,
Same issue here. I've been capturing well with the same setup months ago and have not had this issue until now.
The video "freezing" happens during writing to the hard disk during capture. Using Activity Monitor, you can see 2 second "bursts" of data written to disk every 30 seconds. The video in the capture window freezes during these bursts.
Activity Monitor also shows zero bytes of data being written to disk in between the bursts, but that doesn't seem right, because I know the video is being captured. (You can play it back in FCE)
The freezing can be seen during capture and when playing the captured clip in the viewer. Audio playback is fine.
I tried 3 different Scratch Disk settings with the same results:
External USB 2.0
External FW 800
Internal disk on PowerMac
Dual 2.0 GHz G5 (Cheese-Grater) PowerMac
10.4.9
FCE HD 3.0
QT Pro 7.1.5
3.5 GB Ram (100% set for FCE in settings)
FCE Easy Setup for DV Converter
Canopus ADVC110 converter
Analog VCR input into Canopus (Default settings on Canopus)
Firewire connection from Canopus to Mac
I couldn't find anything in your FCE Editing Workshop book that could help with this either. Everything worked fine a few months ago.
Dual 2Ghz G5, 12" G4 iBook, Sunflower iMac Mac OS X (10.4.9)

Windows freezing during boot,after vga drivers installation

System freezes during the boot process,as soon as i install nvidia drivers.i ve tried eliminating the problem with several ways,but nothing seems to solve it.different windows version,different drivers version,different cpus,different memories,nothing attached on the board except the hdd and ram,different psu,manually installing drivers,stopping nvidia services,different vgas(9600gt,9800gt,gts240/250)although it works with pov 9300gs or 8600gt 512.additionally,system boots up normally in safe mode.is there anything you can possibly propose?
thanks in advance.
cpu:intel c2d e8500
m/b:msi p43t-c51 ms7519 latest bios
memory:2x kingston 2gb 6400
psu:premier 450w
vga:point of view 9800gt 512 green edition
os:windows xp pro 32bit
hdd:500gb hitachi
pci:serial port oem card

guys i have the exact same problem it has nothing to do with psu i have a coolermaster 800W and a msi9800gt vga this m/b has compatibility issues with nvidia graphics drivers and some nvidia vgas. I have two of them. Both have the same problem get an AMD graphic card. Trust me i know what i'm talking about. I tried every possible solution out there nothing worked. I emailed msi technical support they just send me latest bios and latest drivers nothing. I tried to update vga bios nothing. I tried tree different psu all from different vendors guess what nothing. I changed my memory modules nothing. I changed cpu nothing. I tried every bios available nothing.

Ports not working--mac freezes during hardware test

My immediate problem is my mac freezing during the hardware test. I know it can take some time for the test to be completed, but it was over an hour and it was frozen at "2 min 16 seconds," and the mouse and keyboard aren't recognized. Even during the short test.
I held the power button down and turned it off.
The bigger problem is non-functioning ports. First it was the firewire ports to my maxtor hard drive and then my lacie superdrive. And it's not the cord or the units. They work other places. That was approx. a month ago. I didn't worry too much and went back to the internal drive.
Then today my internet stopped working. The modem is not reading the computer and the computer is not reading the modem. The modem works fine with my laptop thank goodness (although it's a PC we bought for the kids to play computer games on and it's driving me crazy!). So the modem and cord are fine.
Then a couple of my USB ports were not happy today. One wouldn't read my daughter's ipod touch, but then later did (?).
And to go back to the very beginning, sometimes when I put the computer to sleep, it freezes on a black screen with a working mouse pointer, but nothing else and I have to force quit. If it goes to sleep on its own, it's fine.
Here's what I have done today: done the PRAM boot, some other command-option-O-F boot, tried the hardware test twice--it froze twice. Repaired all the permissions, reset the thing. All this I found out on the discussion groups.
I have read a lot of posts of similar problems and tried what was said there.
Am I heading for a crash? I cant back up my new stuff because the firewires are non-functional. I can't burn bunch of stuff to discs because the superdrive is going bad and won't burn properly (which is why I bought the LaCie which my computer now won't recognize.
I can't get anything off my computer except in bits and pieces with 2GB usb drive.
I know I'm rambling, but I've just spent 5 hours trying to fix this thing. Any suggestions? I'm going to take it in to the apple store to get it repaired tomorrow, but I'm worried I will lose all my data. Also I am scared of what it will cost. Is there anything else I could do tonight?
I'd love to have something else to try. Many thanks,
Barbara
Message was edited by: Barbara R.
Message was edited by: Barbara R.

HI Barbara,
It sounds like the hard drive is failing or has failed. Boot from your Mac install disc and if you can run Disk Utility in case the startup disk needs repairs.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If you cannot boot from your install disc, try booting in Safe Mode
What is Safe Mode
Carolyn

The windows freezes DURING iTunes installation.

i have Sony Vaio VGN-N11M, 32Bits. i used to run windows XP and iTunes was working fine, after installing windows 7, i tried to install iTunes but it freezes during installation, and i have to reboot.
i Created a New User Account but the same problem happened, also Removed iTunes Plug-ins, checked the Conflicting Processes and Disconnected the computer from the Internet whilst installation but still the same thing keep happening.
i though it maybe because i had old slow RAM so i upgraded to 2GB RAM but still the same problem. i havent updated/backed up my phone for two month and the phone now is being funny too
i need help

mmotil wrote:
I'm having the same issue trying to install a new out of the box copy of XP home.
It says "session3initializationfailed" I then have to reboot with the power button. It does it every time. The Windows is SP2.
Ditto for me. BootCamp fails to install XP Home SP2. I have a legal full version bought from Best Buy. Partition is created fine, but get this error when Windows is being loaded: SESSION3INITIALIZATIONFAILED.
I have no clue what to do, other than purchase Vista Home Edition and give it a go.

Imac freezes during start-up. Seems to be caused by Airport issue.

My Imac freezes during startup. I have tried starting it in safe mode without any luck. After the initial start sequence when it gets to this point: Airport linkup en1, the computer starts writing the same line endlessly: com.apple.launch [1] (com.apple.mDNSRsponder [2710]): posix_spawnp (“/usr/sbin/mDNSResponder”,...): No such file or directory
I am not a technician and new to Macs too. I have tried almost everything in the supportfile about freeze issues. I am not able to start the Mac in safe mode. I have repaired the disk. I have tried reinstalling the software, but this fails too.
Did a couple of changes on the timecapsule before it happened (creating a network and new security settings and backup settings) and installed Photoshop Elements 9 and did a lot of file restructuring. Left the computer open and came back to a blue screen. Since then I have been unable to start.
My macbook works fine with the changes. I am stuck - what to try now?
I need my files and they are luckily on the timecapsule, but i am not able to open the imac-bundle file on the macbook, why?
Thanks for helping.

did a lot of file restructuring.
In Finder>Go>enter /usr/sbin do you see mDNSResponder listed there?
Try Repairing Permissions for the Volume in Disk Utility (Note: may take a long time in 10.5.8)

Zen Micro Freezes during play and sometimes won't turn on at

I have been having some issues with my micro and wondered if anyone could help. I didn't drop it or do anything I can recall to cause these issues, it just seemed to start out of the blue. 2 things are happening. Sometimes it will freeze during play and "buzz" (it's really just transmitting a countinuous sound of a millisecond of what it was playing like if the guy was saying apple, and it freezes when he starts to say it it will sound like "aaaaaaaaaaaaaaaaaaaaaaaa" but in a completely illegible buzz way). Second, it will sometimes not turn on at all, no creative logo, no lights, no nothing. Once I take out the battery and replace it, it will always then start no problem. The battery does not seem to be loose at all as the above mentioned buzzin will not stop until I remove the battery, and as I have repeatedly removed the back of the micro during these buzz session?the battery remains firmly seated and the buzzing continues until I remove it. So far I have updated the firmware to 2.2.02 (which I believe reformatted) which didn't stop it from freezing up during play, and just now did a disk clean up (which I can't imagine will have any change?if a complete format didn't). I haven't had the start up problem since the firmware update, but I haven't turned it on and off that many times yet. Any ideas? Sorry to be so verbose but I wanted to explain as best as I could what's wrong, and what I've done so far.

Remove SIM and miniSD card first. Try to boot.
The try hooking it up to the PC again. And see if you might be able to redo the update process.
You can also try a hard reset. As described in a different tread. (Or read below).
Othervise, I afraid you will have to take it to a Service Center.
-- Quote from djassa1 (Re: N80 won't start up!)--
Just reset to factory default.
You will need your 2 hands to do that: While the phone is off press and hold the [Green call Button] + [3 digit button] + [* button] and power on and hold the powwer button. Do that until the phone asks you for the local city reference.
-- End Quote --
Best of luck!

Freeze during editing

Similar Messages

Maybe you are looking for