Freeze mask Tool - Liquify

Hello there,
Just to let you know that with CS6, each time I use liquify, and the Freeze and Thaw mask tool... the brush is freezing really often, preventing to apply correctly the mask... really not working smoothly !
Regards
Agathe

Check out this link to see what video cards are supported and how to troubleshoot related issues:
FAQ: What features use the GPU and how do I troubleshoot GPU issues?
Pattie

Similar Messages

Does the new Photoshop Elements 13 have the freeze mask tool when using liquify

Im wanting to know if the new photoshop elements 13 has the freeze mask .. thats used in liquify ? I know the older versions do not, and also aware that PS does have it… was hoping they included it in the new elements 13 ??

Yes.
Click on an icon that looks like this:
Now look for something like this in the tools options panel that looks like this:
If you don't get this panel open then click on tools option as shown in this picture:
Hope this helps.

Where can I find the freeze/thaw tool in liquify for Adobe CS 6 extended Version 13.0.6x64 on Mac system?

Hi, sorry for the noob question but I can't seem to find the freeze/thaw tool in liquify for Adobe CS 6 extended Version 13.0.6x64 on Mac.
Any help would be greatly appreciated.
Thanks

Hi
First of all, thank you so much for taking your time to reply!
But it seems that I still can't find it in my photoshop application, I've attached a screenshot of what I see on the left after I click "liquify"

How do you use the MASK tool with 4K footage?

Hi everyone!
Normally when I use the mask tool, I drag it onto the footage and four nodes appear on the clip, one in each corner - and then I can move each corner to where I want it...
I've just shot some 4k footage using a Canon 1d-c and for some reason, when I drag the Mask onto the footage, the four nodes still appear but I can't move them around!
Does that make sense?
Any help would be massively appreciated!
Thanks in advance!

There shouldn't be any difference in being able to adjust them just because you're using 4K. I can't reproduce the problem and can't think of a reason why it would happen. Hopefully someone else will chime in.
Russ

Can't get "Type Mask Tool" to work

I'm a newbie to the program and have been able to understand how to use all the tools so far EXCEPT the Type Mask Tool. The Product Help in the Adobe Help Center is very brief and vague. I searched all the online avenues and didn't see my problem addressed.
With my photo as the background layer, I created a new layer and did a New Fill Layer / Gradient. I then used the Type Mask Tool to create some text I wanted to cut out of the gradient layer to paste onto a new layer. I can type the outlined text on the gradient layer but that's it. I can't get it to separate the text from the rest of the layer. If I switch to the photo (background) layer, the outline text is there too and it will cut out the text from the photo/background. But I don't want it affecting the photo/ background layer.
Does the type mask tool only work on the background layer? I tried gradient, solid color, and pattern filled layers and result was the same: I could type the type mask text but it had no effect on those layers, only on the background layer. The Product Help (as vague as it is) doesn't say it only works on the background layer. I'm obviously using the tool wrong, but can't figure out how to use correctly following the limited Product Help explanation for the tool. Can someone give a more thorough explanation of what the tool can and can not do and how to use it? Thanks!

Scott,
You can use the Type Mask on an adjustment/fill layer's layer mask... you just need to fill the selection or the area outside the selection with the appropriate gray-shade to give the degree of transparency/opacity you want.
For a simple example, if you have a background layer, and a gradient fill layer over it, and have selected the gradient fill's layer mask - when you use the type mask, once you have the marching-ants marquee, fill the selection with black to allow the background to show through the gradient in the shape of the text mask. Or, invert the selection and then fill with black to hide all of the gradient fill except the text shape.
While this may seem more complicated at first, a bit of practice will demonstrate that the added flexibility is well worth the time it takes to understand the concept.
HTH,
Byron

Mask Pro 4 vs. Photoshop CS5 masking tools?

There hasn't been an update to OnOne's Mask Pro 4 for several years and I was wondering if it still has any improvements over the masking tools in Photoshop CS5? If so, is it worth buying? Thank you

As set out in my own original post elsewhere, I was not satisfied with the results I was getting with Refine Edge, although others seem to be happy with it. I am not here to promote, but would suggest that if you are in the market you should at least take a look at the Topaz Labs solution ReMask 3 (which was relatively recently updated) after demoing it, I liked it and bought it. Refine Edge to me seems a little kludgy in comparison. I think I am getting pretty nice results with it, but I have no basis of comparison with the OnOne solution. Its got a relatively short learning curve, and the 30 day demo does not watermark, etc., so you can give it a good look before you decide to purchase.

Track Mask Tool Not Available in AE CC 12.0.0.404?

I am trying to use the Track Mask tool in AE to do a simple track on a sign in my footage. But, after watching several tutorials, it seems that the track mask tool simply is not available in this version.
I have tried command clicking with mask path selected, looked under Animation for an option, and command clicked the mask layer itself on the footage, and have not seen the track mask option.
Like I said in the title, I am running 12.0.0.404. Does anyone know what version the Track Mask tool became available?
I need an Administrator to update, which I am willing to take care of if it means this tool will become available.
Thanks

I can understand not going to 13.1 in case you don't like the new interface (which is improved somewhat in 13.2, by the way), but you should definitely be on the latest version of 12 for all the bug fixes and new features! (Although, in my experience the latest version of 13 runs really nicely.)

PSE 6 for Mac, how to install the new layer mask tool

I just bought the new PSE 6 for Mac, whew what a change in the color of workspace.
My classmates and I are wondering how to install the free layer mask tool that Sue Chastain has on her About site.
Or perhaps first, has anyone used it and do you like it?
Do you put it here?
http://www.jcarter.net/mac-stuff/layermaskthing.jpg
Havent been to this great forum for a while, been busy, I miss you all, and shall try to visit more often.
I remember when I was a beginner at this, I learned so much here and you all were amazing help!
Thanks,
Jane

Hi Barbara,
Its this one,
http://graphicssoft.about.com/od/pselements/p/layermasks.htm
So I assumed afterwards that it wasn't for Mac. So I went ahead and installed the older action for my PSE 4.
I was hoping it was platform agnostic, but when I looked at this, the difference between the 2 versions,
http://www.jcarter.net/mac-stuff/previewfolder-missing.jpg
Not knowing where the Previews folder was, threw me overboard.
And I didn't read all the way down Sue's page, as my old brain got ahead of my eyes.
So I really dont know what to do next with this, some of my classmates are wondering the same thing.
Thank you,
Jane

Trouble using mask tool and filter...Could not rasterize because the pixel data for this layer is not directly editable - masking

I've searched for an answer to the problem I'm having on cs4 and can't find it, so here goes:
New to photoshop, I'm trying to fake some depth of field (i.e blur the background) on a wedding photo by using the masking tool to mask out the foreground then, out of mask mode> select>inverse to get the dotted line around the image, then using Filter>gausian blur on the background.
1. The dotted line around the image doest look right
2. I can't use the filter facility (its greyed out) and when I try to use the blur tool from the side menu got the above message.
Any help much appreciated.

Which operating system are you using?
I'm using Mac Lion V 10.7.5, working on a photoshop cs4 trial version (could be the problem?).
I Used the quick mask mode to mask the area.
Here's a screen shot - (I have blacked out some of photo for subjects' privacy):
- mask mode turned off, then Select>Inverse to show unmasked area (note, the dotted line continues round the bottom of the pic which indicates to me I have made a masking mistake, as dotted line to mask out background only should go round the top & sides of the photo and then outline the couple, - right?
Image mode of image: If I understand correctly what this is, the image mode is .jpg
Bit depth of image: Bit depth of image is 8, color mode is RGB.
Hope I've given you the information you required.
Thanks
P

LR4 - what happened to the mask tool?

In LR 3, when I clicked on the mask tool I could see little circles marking my previous adjustments and I could then click on one of the circles to eliminate it or adjust it. I don't see that anymore. Is there a preference I cannot find that I need to adjust? Thanks!

You could be getting the "custom" heading for the adjustmenst because Lr4.x uses Process Version 2012 and Lr3.x uses Process Version 2010 ... so when Lr4 looks at the older version it may think something more than Exposure was adjusted because of the difference in Process Versions.
You can update to the new PV or just let you legacy images at the older version ... though your Develop adjustmet sliders will be as they were in Lr3 ... Any newly imported images will automatically use PV 2012 ... which has the new Development tools ...

Using the "quick mask" tool to change a color

Good Day All
I am a wee bit confused. I wanted to show someone a way to change hair color in Photoshop CS5. Using the method I have used in CS4 I did the following.
In CS%, I clicked on the brush tool and then on the “quick mask” tool. Stared painting in the area I wanted to change. When I clicked to take off the quick mask tool, the paining I had done disappeared. That was it. In CS4 when I turned off the quick mask tool I would get an outline if the mask.
Is there a setting I am missing or has CS5 changed how this works?
Thanks All

Thank you Mylenium....
Here is more information.....
These are the steps I do and the changes that take place
1) Select the brush tool
2) Select quick mask. When I do this, on the layers panel, the background layer is not highlighted
On the bottom left hand side the “set foreground & back ground color changes from (foreround) black to gray and the background color stays white
3) Paint (it is red) the area I want to change and click on the quick mask.
The red where I painted disappears, and the outline is not showing. On the layers panel on the right hand side is now highlighted and on the bottom left hand side the set foreground color changes to black.
4) If I click on the quick mask, the painted area comes back.
I located the “quick mask” under the tab channels. It is displayed as a separate channel. When I turn off the quick mask, the quick mask channel disappears. When I turn on the quick mask, the quick mask channel reappears….
Do I have something set wrong

Soft Edged Mask tool or plugin?

Hi there,
if I got this right, there is still no way in CS5 Premiere Pro to do a simple soft edged mask like in AE. Is there tool or plugin known for Premiere Pro that could do this at least allows cropping an image and soften the new edges?
Thanks!

No masking tools like you're accustomed to in in After Effects (make a feature request like most of us have). Depending on the shape you need, you could use the Track Matte effect for this, though.
Diesign a shape in the Titler or Photoshop (either as white on black for a Luma matte or as a shape on a transparent background as an Alpha matte), drop it on a track above the clip you want to mask, and apply the Track Matte effect to the clip you want to mask. Set up its parameters to use the shape you created to mask parts of the clip. You can drop a blur effect on the matte clip to soften the edges of the mask, without affecting the video within the mask.
Pixelan SpiceMaster also offers some on-clip masking tools.

Watermarking-Horizontal Type Mask Tool

hello, i have been using the PSE (for MAC) and watermarking my photos- suddenly, all my brushes disappeared. i have been trying, for days, to figure out where they went but cant find them. there used to be a horizontal text tool in my program, but now there is a horizontal type mask tool, i dont know what that is! and where my horizontal type text tool disappeared! now, when i open a new blank file and type a word for a watermark, the text becomes "dotted" like connect the dots/lines not solid lines like it always did before. moreover, it wont let me assign a brush. i dont know what has happened, all i know is that i cannot water mark my photos and my work is suffering. can anyone, please, please help? desperately, sos21

There is a Photoshop Elements-Forum:
http://forums.adobe.com/community/photoshop_elements

Help with the horizontal mask tool ,please?

I am still using the trial version of PSE 8. I have read the help section on creating & using the type mask tool. I also looked at the creating type mask tutorial. Hoewever, it does not work for me. I want to use a photo (like the zebra stripes in the tutorial). The font used in the tutorial is Stencil Std. and I don't have that one. I set the font size to 100, but what is typed isn't even close. The font style in the tutorial is set on bold. Mine is set on regular and I can't the menu to drop down to change it. What am I doing wrong?

You need to choose a really fat, chunky font, and set the size as large as it needs to be, which may be much bigger than 100 pts. Bold is available as a faux style via the options bar settings but it only appears in the menu if there is an actual bold font (in other words, if you are using a font which doesn't have a true bold style you may be able to fake it, but you won't see the name as myfont bold).

Using the mask tool.. need help

The StudentFilmmakers magazine has an Adobe forum with an After Effects section and we have a few questions that need answers. Here is a link to one and below is the question.
http://www.studentfilmmakers.com/bb/showthread.php?t=4830
"Hey! I'm experiencing After fx for the first time.... and I wonder how I use the mask tool to remove something in a movie clip.
I have a clip with a boy jumping on a trampoline....then I want to cut out the background and insert a mountain cliff so it seems that he falls from the cliff.....
How ?? "
We love Adobe products and we feature film and video makers from out networking section each issue. We very much apreciaete help from professionals or knowlegable people. You are welcome to put your links in your signature and we do reward our posters and feature networkers in the magazine.

Better answer??
- Place the movie in the timeline creating a new composition of the size of your footage or drag it onto the "create new Comp" icon.
- interpret your footage properly
- use the pen tool and start to draw a mask around your jumping trampoline guy at the very first frame of your timeline
- open the mask properties of your movie layer and click the stopwatch icon to create a keyframe for the mask shape properties
- now move one frame forward in the timeline and readjust the mask - keyframes will be added automatically for you
- if done, move next frame in timeline and readjust your mask
- if done, move next frame in timeline and readjust your mask
- if done, move next frame in timeline and readjust your mask
- if done, move next frame in timeline and readjust your mask
- if done, move next frame in timeline and readjust your mask
- if done, move next frame in timeline and readjust your mask
- ... if done with all, click the "show transparency" button of your comp window. place your mountain underneath the masked movie and you're done.
this is called rotoscoping and makes a lot of fun.
if your actor was shot in front of a green screen or a blue box, you could use the Ae keying plugs and make this process a lot easier, of course i would not recommend a desk lamp for lighting your scene and not a $ 100,- videocamera from Wal Mart.
better answer?

Freeze mask Tool - Liquify

Similar Messages

Maybe you are looking for