Freeze Spreadsheet header in Web Analysis Report (HTML format)

Hello,
I want to know if there is any way to freeze the spreadsheet header in Web Analysis. I know it can be done if the report is opened through Web Analysis Studio. However, when the user opens it in HTML format, the header will not be freeze.
We are using 9.3.1
Thanks,
Andy
Edited by: user642800 on Jun 4, 2009 1:22 PM

I don't believe you can do this. We ran into the same issue last summer and it left our long scrolling dashboards useless as you couldn't see what row you were looking at once the row headers had left the screen. We talked about having some dashboards launch from workspace and others from Web Analysis but this was messy and we wanted them to one-stop shop in Workspace.
The answer for us was to put a Check Box on the right hand side and the users only select the amount of members that fill up their screen. For instance, if we had 20 columns of data (accounts or scenarios) and only 5 were visible at one time, they would only select 5 to view at any given time.
As far as column headers, we haven't had any complaints when those leave the screen.
This was a huge issue for us but luckily we came up with a workaround that seems to have worked for all of our users thus far.
Mike

Similar Messages

  • Web Analysis report is not coming with the border/logo/heading while print

    Hi All,
    I am using 9.3.1 version of hyperion planning were Web Analysis report is not coming with the border/logo/heading while printing with the option "print all object", Only the data grid is coming in the print. If I use "print screen" it is coming with border/logo/heading but it gives a screenshot of the report, that won't cater out need.
    So please suggest us with a resolution to have border, logo and heading, while using Print all object.
    Thanks with regards....
    Rao

    Hi Sagar,
    In scripts when you will see print preview the logo will be not shown up with clarity.Take the print out of the document and check whether logo is printing up with clarity.
    Thanks
    Phani

  • How to Set up the User POV in Web Analysis report

    Hi , I am new to create the Hyperion Web Analysis report.
    I am trying to set up the user POV. I have followed the document and did the below steps.
    1. I went to User preference -> OLAP Server -->checked the BOX "Save Filters only for POV".
    2. selected the layout and in options checked the Use user POV.
    after that I have opened the report in HTML. nothing got prompted.
    When I opened the Financial report, It will prompt user to select the year, period, entity, etc... I need the same way in Web Analysis also.
    I have selected Accounts in rows, Entity, Year, Period in columns , rest all i kept in Filters.
    Could some one please help me how user can get prompted to select the members from dimensions.
    Thanks

    What you have in Webanalysis is POV and PV
    Applying Point of View (POV)
    Selecting Personal Variables
    You can also look at Oracle - Hyperion Labs......: WebAnalysis - how to show the current user's report when he logs in to see how PV can be leveraged.
    There is no prompt option in WebAnalysis
    Regards
    Celvin
    http://www.orahyplabs.com

  • How to arrange page dropdowns in the Web Analysis report

    Hello, Experts!
    I have created a Web Analysis document based on my Esssbase cube. This document contains just one grid with 7 dropdowns. All dropdowns are in one line above and they are narrowed so as they all fit into 1 line within the screen and I cannot see the full names of members within a dropdown. So I need advice on how I can arrange the dropdowns in my Web Analysis report so that I can see the full names of members when opening the dropdown? Thank you so much!

    Thanks a lot! Yes, it works if one creates dropdowns via combo box controls attached to the same data source as the spreadsheet and applying these controls via the service button control (in this case you do not create page dropdowns in the data layout window of the spreadsheet and leave them in the data layout window's Filter pane). Otherwise it is impossible to edit the size and position of page dropdowns created in the Data Layout window of the spreadsheet.

  • Not able to export web analysis report to excel smart view from workspace

    Not able to export web analysis report to excel smart view from workspace.
    Error :Web launch operation has been cancelled.
    Can anyone help me to resolve this issues

    I realized that I can put a block in WebI and then I can pull that in excel alongside of static header, after putting the question.
    My interest to know whether it is by design in XI 3.0 or it is an issue. But by the replies it seems to me like it is by design.
    @Anis: I can't go for header as part of Body. Because this report is viewed in Web by many other users. I can't have separate report for Live office, it is a restriction for me. If I use the header in body, it wont look good I guess.

  • Can we schedule web analysis report on workspace

    I am working on Hyperion 9.2. i want to know that is it possible to schedule the Web Analysis reports on workspace?

    There was a way to launch an Analyzer report to html using the command line. This could then be scheduled but they've removed the functionality in System 9. The really annoying thing is that they've actually left a lot of the code lying around that enabled you to launch using the command line.
    As Sean says it's now not possible unfortunately.

  • Error while operating Web analysis report in Workspace

    I have created a web analysis report in which i have provided buttons, on the click event of button it must open a link provided.This button is working fine when opened using Web Analysis studio but on running this report in workspace, when i press the button i get this error "This Service is not supported by the HTML client".
    Please help.

    Have you tried checking the "Design for HTML" from the Edit toolbar to see if you get any error when saving?
    Do you have any advanced items on the report, as there are 4 types of differences between Studio and HTML:
    - font differences, Workspace (DHTML) uses the WA Server fonts whereas WA Studio client machine fonts.
    - Service Buttons are very restricted using Workspace
    - Display: Tab selection, Splitter panels, Slider selection do not render in Workspace
    - Cannot restrict WA Tools menu in Workspace at all, where you can in the Studio.
    For exact details check out the Hyperion Web Analysis Studio User’s Guide from the Doc Library:
    http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_4.htm

  • Issue while opening the web analysis reports

    Hi,
    One of our user is not able to open a web analysis report with an error messages saying
    "Java.Lang.Exception: Unexpected HTTP status code of 500 received from server"
    "Document does not exist or no authorization to open the document"
    Other users with the same level of access are able to open the report fine and also the same user is able to access the report fine with a test id from his machine.
    What could be wrong? Any suggestions please.
    The only thing I see here, something wrong with userd ID or password.
    Thanks
    Prasad

    Hi,
    I had also faced this problem earlier. I was using HFM as data source for WA reports. After searching I found that there was some change at HFM level. Some dimensions/members had been deleted or added in HFM. And I was using those missing members in WA Grid.
    I had to recreate my reports again as I didn't get any other way to deal with this problem.
    Please shared any other alternative option, if you found while working on this issue.
    Thanks & Regards,
    Mohit Jain

  • Unable to open web analysis reports through workspace

    Hi,
    I am connecting web analysis with MSSQL server 2000 and generating reports. I am using essbase 9.3.1 version.
    But my problem now is that I can just open these reports from web analysis studio and cannot open them from workspace. In workspace, if I right click on the report and open it from web analysis studio it does open. But it does not open by double clicking the report in workspace. It just shows a blank report on just parts of the report.
    The issue is only there for the reports that are getting data from relational db (MSSQL server 2000). The other reports that are using the cube data are fine and opening from everywhere.
    Are there any other configuration settings involved in order to open a web analysis report(that uses relational db) from workspace?
    Thanks in advance,
    John

    Hi Atul,
    Try using the in built config checker:
    http://localhost:16000/WebAnalysis/config
    This has several tests you can perform to see what's running.

  • Q:-  Migrating version 6 Web Analysis reports directly to version 11  ??

    Trying to migrate version 6 Web Analysis reports directly to version 11.1.1.2 without first migrating to version 9, because of some time constraints.
    Overall it works fine, except for some issue with PV (Personal Variables) in those reports.
    The PVs are present in the version 6 xml export file, but somehow not being picked up in version 11.1.1.2 Web Analysis import.
    Has anyone tried to migrate version 6 Web Analysis reports to version 11.1.1.2 and faced this kind of issue?
    I am wondering if there is any change in the xml tags because of which the migration from 6 to 11 is not working.
    Anyone has any thoughts or ideas to quickly migrate web Analysis reports from 6 to 11. There are hundreds of reports that need to be migrated.
    - Nasar

    Hi,
    Welcome to Forums...!
    I think we need to change the database connection details in the Web analysis.
    goto file --> Edit --> browse the database connection then change the server name in the connection details.
    may be this will help to resolve your issue.
    Thanks,
    mady

  • Web Analysis Report Migration from 9.3.1. to 11.1.1.3

    Hi All,
    We are migrating from 9.3.1 to 11.1.1.3 we have couple of web analysis reports running on the old server 9.3.1 and now i have to migrate those reports on the new server 11.1.1.3. Reports in 9.3.1 are in windows servers and it should me migrated to 11.1.1.3 which is on a solaris server. please let me me know if you have any ideas regarding this issue.
    Thanks,
    Ram.
    Edited by: KRK on Sep 29, 2009 8:56 AM
    Edited by: KRK on Nov 6, 2009 12:53 PM

    Hi Vijay,
    I have checked migration utility inversion 9.x basically this migration utility is compatible for reports from version 7.x to 9.x and it is not supported for reports from 9.x to 11.x ....
    So i have finally fallowed a procedure.
    I have exported the reports from 9.x and imported in 11.x .
    Then after exporting i have pointed database connections to new 11.x version server.
    Now I was facing a issue when i open a reports in read only mode (i.e as a business user) iam getting a screen where it asks for database details ( I have assigned business user read access to essbase)
    Basically this reports are pointing to my old essbase server i.e version 9.x server.
    Please let me if iam missing something while exporting and importing reports.
    Thanks,
    Ram.

  • Web Analysis reports based on Planning application

    All,
    I have migrated planning application from dev to prod using LCM, planning version 11.1.1.2. everything has been migrated and working fine.
    Web Analysis reports, and Database connections are also migrated from DEV to PROD.
    User has uploaded some PLAN data for FY10 through smartview on PROD server, but unable to see the data using Database connection migrated from DEVL but he can see the data when he creates new database connection on PROD.
    both database connections are from same database but he cannot see any new data uploaded through smartview with old database connection and he have tons of reports based on old database connection.
    can I change database connection for old reports with new database connection or do I need to fix something on my planning side.
    Please provide some suggestions. I can give more info if required.
    Thanks
    Ravi S

    Hi,
    LCM will have created xml exports with the database connection information in them.
    If you open one of the xml database connection exports you will see something like
    <server-name>localhost</server-name>
    <application-name>PLANSAMP</application-name>
    <database-name>Consol</database-name>
    You would need to update the information such as the servername in the files then import them in again using LCM.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Not able to open web analysis reports after upgradation

    we have upgraded Hyperion 11.1.1.3 to 11.1.2.2 version, after this process we are not able to open web analysis reports
    These reports are still pointing to old servers so, how to edit this database connection details in the new version??
    Edited by: 1007326 on May 22, 2013 3:29 AM

    Hi,
    Welcome to Forums...!
    I think we need to change the database connection details in the Web analysis.
    goto file --> Edit --> browse the database connection then change the server name in the connection details.
    may be this will help to resolve your issue.
    Thanks,
    mady

  • Disable Drill options only for one dimension of  Web Analysis report

    Hi,
    Please help me on below issue.
    I created a web analysis report with 3 dimensions Accounts, MRC and Measure. I have to disable drill down and drill up options only for Measure. Accounts and MRC should be drillable where as Measure should show the selected member as static and not drillable.
    Thanks

    Hi Swetha,
    You must've realized that- Even if you select only the desired members, you end up being able to drill-down unwanted members. Correct ? :)
    The only way, I believe, is- To create a users' group at your Data source side, perhaps, Essbase & provision this new group with a Metaread filter which prevents him/her from Drilling down to the leaf node.
    PS: Giving Read access might also let the user not see the data for children. But, if you want to hide the members also, Metaread+ is the way to go.

  • Selecting Member Name and also Alias in Web Analysis report

    I have made a web analysis report and now i want to show member names as well as alias of the members which i have selected on row side. How can i do that?
    Thanks in advance.

    in the member properties, you have an option to show alias, member name, or both. Click on both / alias as per the requirement

Maybe you are looking for