Freeze toolbar while scrolling down in ALV grid using OOPS
Hi,
My program is showing few products in ALV grid using OOPS. But If I scroll down to select a product, then I cant see the toolbar on which I have to press a button using selected product. Is there any way to freeze toolbar while scrolling down also.
As of now I have to scroll up after selecting product and then press the button on toolbar.
Regards,
Seema
Edited by: Seema Naharia on Feb 23, 2012 9:17 AM
Hi ,
You may have to set handler for the toolbars. Check class cl_gui_alv_grid for the events toolbar.
Or just for a try, since your problem is only when scrolling,you can use set_visible_row_count to -1 , so that data will appear in same view without the need to scroll.
Regards,
Ramya
Similar Messages
-
Enable User Defined toolbar button on click - editable alv grid using oops
Hi all,
I have created editable alv using oops concept.
created 2 user defined toolbar button save and print using method toolbar
ls_toolbar-text = 'Print'. "#EC NOTEXT
ls_toolbar-quickinfo = space.
ls_toolbar-checked = space.
APPEND ls_toolbar TO e_object->mt_toolbar.
requirement is
initially print button should be disabled, and save enabled
when i click save button, print button should be enabled.
I want coding in editable alv oops concept
kindly help
regards
senthil kumarHalo Senthil,
You should call set_toolbar_interactive method of cl_gui_alv_grid in the on_user_command( ie the event handler for event user command) .
method on_user_command.
case e_ucomm.
when 'SAVE'. or whatever your function code is .
my_save_flag = 'X'.
call method grid->set_toolbar_interactive.
endmethod.
This triggers the toolbar event of the
cl_gui_alv_grid. Inside the eventhandler method ( ie the on_toolbar method ) you should set the toolbar.
if my_save_flag = 'X'.
read table e_object->mt_toolbar
clear l_toolbar-disabled.
modify e_object->mt_toolbar.
endif.
e_ucomm will not have the function code if the save button is not in the toolbar area.
then you can set the my_save_flag in the data_changed event handler of the Cl_gui_alv_grid.
Regards
Arshad -
Display error message in ALV grid using OOPS
Hi,
I have a requirement to display report in ALV. I have created ALV grid using OOPS with three editable cells and 1 button on toolbar. When user enter values in Ediatble cell and click on the Toolbar button, sales order item should be assigned to contract.
When the user select the row and click on toolbar button, a salesorder item should be assigned to contract and i am using BAPI and fine with BAPI. All the error message should be displayed in a popup and the corresponding failed row should change its color .
Once the user identified the failed row, he can edit the value in the ediatble cells and should reprocess in the same screen ( without going back to selection screen).
To display POP Up, I am using FM BAL_LOG_CREATE, BAL_LOG_MSG_ADD, BAL_DSP_PROFILE_NO_TREE_GET, BAL_CNTL_CREATE.
by using above 4 FM , i can display POP UP. but i cannot change the color of the failed row.
Once I identified the failed row and reprocess from the same screen , I am successful in processing the failed row, but my error log still has the reprocessed row as failed row because, error log is not refreshing.
Please suggest me how to clear error log which was created by using the above FM's and change the color of the failed row .
Thanks in AdvanceHi
Please suggest me how to clear error log which was created by using the above FM's....
U can use BAL_LOG_REFRESH
....and change the color of the failed row
You need to insert a new field for Colour Attributes in your output table and input its name in the layout structure:
IS_LAYOUT-INFO_FNAME = <field name for colour>
The field has to be a CHAR 3 and its value can be -
> Cxy
C is a constant
x is the colour number (from 1 to 9)
y is intensified (0 = off, 1 = on)
After changing the value of output table you need to run the method REFRESH_TABLE_DISPLAY for refreshing the output
Max -
Sub total in ALV GRID using oops concept
Hi,
If Plant (VBAP-WERKS) is not the same for all items on a Sales Order (VBAK-VBELN is the same for al items) then create a separate line on the report for each different plant specified in the line items. Copy all fields from the original order line except for plant and Net Value. Net Value should be the total of item Net Values for all items with the same plant in the order.
Example:
Data:
Order---- Item- Plant- Net Value---
123---- 010- 3467- 100.00---
123---- 020- 7865- 50.00---
123---- 030- 3467- 80.50---
Report:
Order- Plant- Net Value---
123- 3467- 180.50---
123- 7865- 50.00----
I need to dispaly the Report format in ALV Grid using oops concept...
no need of calling any function modules.
Regards,
NithyaHi
Here is example code
This is the method to be called:
get_subtotals
Use
Returns the current subtotals of the ALV Grid Control. Having created totals for at least one column, users can calculate at most nine subtotals. The list is sorted by the values of one or several columns (called the subtotals column). If a value is changed in the subtotals column, the subtotal is displayed (this is also referred to as control level change).
Integration
Before you access the subtotals value, you use the method get_sort_criteria to get the sort table . One row of this table describes properties of a column in the output table.
If the field SUBTOT is set for a column in this table, the column is a subtotals column.
The field SPOS then indicates at which level (see below) the subtotal has been calculated.
The field FIELDNAME contains the name of the subtotals column in the output table.
Based on this information, you specifically access the values of the tables passed (using reference variables COLLECT01 to COLLECT09).
Features
CALL METHOD <ref. var. to CL_GUI_ALV_GRID>->get_subtotals
IMPORTING
EP_COLLECT00 = <reference variable of type REF TO DATA>
EP_COLLECT01 = <reference variable of type REF TO DATA>
EP_COLLECT02 = <reference variable of type REF TO DATA>
EP_COLLECT03 = <reference variable of type REF TO DATA>
EP_COLLECT04 = <reference variable of type REF TO DATA>
EP_COLLECT05 = <reference variable of type REF TO DATA>
EP_COLLECT06 = <reference variable of type REF TO DATA>
EP_COLLECT07 = <reference variable of type REF TO DATA>
EP_COLLECT08 = <reference variable of type REF TO DATA>
EP_COLLECT09 = <reference variable of type REF TO DATA>
ET_GROUPLEVELS = <ínternal table of type LVC_T_GRPL>.
In order to access the values of EP_COLLECT00 to EP_COLLECT09, you use ASSIGN to dereference the relevant reference variable in a field symbol of your output table type (see below).
Parameters
Meaning
EP_COLLECT00
Points to the totals line. Since there is only one totals line which, in addition, has a unique totalling area, no further information is available for this table in table ET_GROUPLEVELS.
get_subtotals
EP_COLLECT01 to EP_COLLECT09
Point to the subtotals line. For each subtotals level, there is one reference variable. Each of these variables points to an internal table that has the type of the output table. EP_COLLECT01 points to the subtotal at the hightest level, while EP_COLLECT02 points to the subtotal at the second highest level, and so on. The levels are derived from the sort priority (field SPOS in the sort table ). The column by which the data was sorted first, is the highest subtotals level.
ET_GROUPLEVELS
Manages all indexes for the individual control levels. The fields of the table have the following meaning:
INDEX_FROM, INDEX_TO: Rows of the output table for which the subtotal was created
LEVEL: Subtotals level (see above)
COUNTER: Number of rows for which the subtotal was created
COMPRESS: For this subtotals line, the user has hidden the associated rows.
COLLECT: Indicates the subtotals table (01-09) in which the values are stored
For an overview, see Methods of Class CL_GUI_ALV_GRID
Activities -
HI all,
Is it necessary to use container for ALV grid using classes.If not then please help me with a sample code.REPORT z_alv_using_oops_conepts MESSAGE-ID z_OOPS.
TABLES: ekko, ekpo.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA: ok_code TYPE sy-ucomm,
gx_fcat1 TYPE lvc_s_fcat,
gt_fcat1 TYPE STANDARD TABLE OF lvc_s_fcat,
gx_fcat2 TYPE lvc_s_fcat,
gt_fcat2 TYPE STANDARD TABLE OF lvc_s_fcat,
gx_layout1 TYPE lvc_s_layo,
gx_layout2 TYPE lvc_s_layo,
gx_variant TYPE disvariant,
g_custom_container1 TYPE REF TO cl_gui_custom_container,
g_custom_container2 TYPE REF TO cl_gui_custom_container,
grid1 TYPE REF TO cl_gui_alv_grid,
grid2 TYPE REF TO cl_gui_alv_grid,
g_container1 TYPE scrfname VALUE 'MAIN_REPORT_LIST',
g_container2 TYPE scrfname VALUE 'SECOND_REPORT_LIST',
gv_event_rec1 TYPE REF TO lcl_event_receiver,
gv_event_rec2 TYPE REF TO lcl_event_receiver,
gv_repid TYPE sy-repid,
gt_final1 TYPE STANDARD TABLE OF ekko,
gt_final2 TYPE STANDARD TABLE OF ekpo,
gt_final3 TYPE STANDARD TABLE OF ekpo,
gx_final TYPE ekko,
gx_final1 TYPE ekpo.
INITIALIZATION.
SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK blk3 WITH FRAME .
SELECT-OPTIONS:
s_ebeln FOR ekko-ebeln obligatory,
s_ebelp FOR ekpo-ebelp,
s_bukrs FOR ekko-bukrs,
s_bsart FOR ekko-bsart.
SELECTION-SCREEN END OF BLOCK blk3.
LOCAL CLASSES: Definition
*===============================================================
class lcl_event_receiver: local class to
define and handle own functions.
Definition:
~~~~~~~~~~~
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
hotspot_click1
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id
e_column_id,
hotspot_click2
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id
e_column_id.
PRIVATE SECTION.
ENDCLASS. "lcl_event_receiver DEFINITION
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD hotspot_click1.
DATA: lv_tabix TYPE sy-tabix,
lx_final TYPE ekko.
READ TABLE gt_final1 INTO gx_final INDEX e_row_id.
IF sy-subrc = 0.
gt_final3 = gt_final2.
DELETE gt_final3 WHERE ebeln NE gx_final-ebeln.
IF NOT g_custom_container2 IS INITIAL.
CALL METHOD grid2->refresh_table_display.
CALL METHOD grid1->refresh_table_display.
ENDIF.
ELSE.
MESSAGE s000 WITH text-003.
LEAVE LIST-PROCESSING.
ENDIF.
ENDMETHOD. "hotspot_click1
METHOD hotspot_click2.
READ TABLE gt_final3 INTO gx_final1 INDEX e_row_id.
IF sy-subrc = 0.
SET PARAMETER ID 'BES' FIELD gx_final-ebeln.
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDMETHOD. "button_click1
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
START-OF-SELECTION *
START-OF-SELECTION.
SELECT * FROM ekko INTO TABLE gt_final1 WHERE ebeln IN s_ebeln
AND bukrs IN s_bukrs
AND bsart IN s_bsart.
IF sy-subrc = 0.
SELECT * FROM ekpo INTO TABLE gt_final2 FOR ALL ENTRIES IN gt_final1
WHERE ebeln = gt_final1-ebeln
AND ebelp IN s_ebelp.
IF sy-subrc = 0.
gt_final3 = gt_final2.
ENDIF.
ENDIF.
PERFORM sub_get_fieldcat CHANGING gt_fcat1.
PERFORM sub_get_fieldcat CHANGING gt_fcat2.
END-OF-SELECTION *
END-OF-SELECTION.
PERFORM display_process.
CALL SCREEN 9000.
MODULE pbo OUTPUT
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
gx_layout1-grid_title = 'Purchase Order Header'.
gx_layout1-zebra = 'X'.
gx_layout1-info_fname = 'COLOR_LINE'.
gx_layout1-sel_mode = 'X'.
gx_layout2-grid_title = 'Purchase Order Items'.
gx_layout2-zebra = 'X'.
gx_layout1-stylefname = 'CB'.
gs_layout1-excp_led = gc_check.
gs_layout1-excp_group = gc_check.
gv_repid = sy-repid.
gx_variant-report = gv_repid.
READ TABLE gt_final1 INTO gx_final INDEX 1.
IF sy-subrc = 0.
DELETE gt_final3 WHERE ebeln NE gx_final-ebeln.
ENDIF.
IF g_custom_container1 IS INITIAL.
CREATE OBJECT g_custom_container1
EXPORTING
container_name = g_container1.
CREATE OBJECT grid1
EXPORTING
i_parent = g_custom_container1.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
is_layout = gx_layout1
is_variant = gx_variant
i_save = 'U'
i_default = 'X'
i_structure_name = 'EKKO'
CHANGING
it_outtab = gt_final1
it_fieldcatalog = gt_fcat1.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid1.
ENDIF.
IF g_custom_container2 IS INITIAL.
CREATE OBJECT g_custom_container2
EXPORTING
container_name = g_container2.
CREATE OBJECT grid2
EXPORTING
i_parent = g_custom_container2.
CALL METHOD grid2->set_table_for_first_display
EXPORTING
is_layout = gx_layout2
is_variant = gx_variant
i_save = 'U'
i_default = 'X'
i_structure_name = 'EKPO'
CHANGING
it_outtab = gt_final3
it_fieldcatalog = gt_fcat2.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid2.
ENDIF.
CREATE OBJECT gv_event_rec1.
SET HANDLER gv_event_rec1->hotspot_click1 FOR grid1.
CREATE OBJECT gv_event_rec2.
SET HANDLER gv_event_rec1->hotspot_click2 FOR grid2.
IF gt_final2 IS INITIAL.
MESSAGE i000 WITH 'No Items exist for the Purchase Order'.
ENDIF.
ENDMODULE. "PBO OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
To react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD grid1->free.
CALL METHOD grid2->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = gv_repid
txt2 = sy-subrc
txt1 = 'Error in Flush'(009).
ENDIF.
ENDFORM. "EXIT_PROGRAM
*& Form display_process
text
--> p1 text
<-- p2 text
FORM display_process .
DATA: a LIKE sy-ucomm.
DO 100 TIMES.
DO 300 TIMES.
GET TIME.
ENDDO.
a(3) = sy-index.a+3 = '%'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
percentage = sy-index
text = a.
ENDDO.
ENDFORM. " display_process
*& Form sub_get_fieldcat
text
<--P_GT_FCAT1 text
FORM sub_get_fieldcat CHANGING lt_fcat TYPE lvc_t_fcat.
gx_fcat1-fieldname = 'EBELN'.
gx_fcat1-tabname = 'gt_final1'.
gx_fcat1-hotspot = 'X'.
APPEND gx_fcat1 TO lt_fcat.
ENDFORM. " sub_get_fieldcat -
Disable editable field in ALV grid using OOPS
I have following requirements,
Displaying ALV grid output with most of the fields editable.
Validations on data entered for each fields,for error messages
Query :
I want to make all the fields except the field in ERROR in display only mode
similar to case when we do validation of fields in table controls.HI
check the below links lot of info and examples r there for OOPS
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
Check these sample code
data : begin of it_mara occurs 0,
mark type flag,
matnr type matnr,
mtart type mtart,
meins type meins,
end of it_mara.
data : begin of it_mara1 occurs 0,
mark type flag,
matnr type matnr,
mtart type mtart,
meins type meins,
end of it_mara1.
data : begin of it_mara2 occurs 0,
mark type flag,
matnr type matnr,
mtart type mtart,
meins type meins,
end of it_mara2.
data : t_fieldcat type lvc_t_fcat,
t_fieldcat1 type lvc_t_fcat,
s_fieldcat like line of t_fieldcat.
data : s_layout type lvc_s_layo.
data : control type ref to cl_gui_custom_container,
grid type ref to cl_gui_alv_grid.
data: begin of wa ,
mark type flag,
matnr type matnr,
mtart type mtart,
meins type meins,
end of wa.
class lcl_events_box definition.
public section.
methods :
*Handler_Data_Changed for event Data_Changed of cl_gui_alv_grid
*imporTing er_data_changed,
Handler_User_Command for event User_Command of cl_gui_alv_grid
imporTing e_ucomm,
Handler_ToolBar for event ToolBar of cl_gui_alv_grid
importing E_object E_interactive.
endclass.
class lcl_events_box implementation.
method Handler_user_command.
PERFORM FORM_USERCOMMAND CHANGING E_UCOMM.
endmethod.
method Handler_ToolBar.
PERFORM FORM_TOOLBAR CHANGING E_OBJECT E_INTERACTIVE
E_OBJECT->MT_TOOLBAR.
endmethod.
ENDCLASS.
start-of-selection.
data : w_events type ref to lcl_events_box.
select matnr mtart meins from mara into corresponding fields of table
it_mara.
call screen 100.
*& Module pbo_module OUTPUT
text
MODULE pbo_module OUTPUT.
if GRID is initial.
CREATE OBJECT CONTROL
EXPORTING
CONTAINER_NAME = 'CUST_CTRL'.
CREATE OBJECT GRID
EXPORTING
I_PARENT = CONTROL.
PERFORM BUILD_CATALOG.
PERFORM BUILD_CATALOG1.
PERFORM BUILD_LAYOUT.
CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = s_layout
CHANGING
IT_OUTTAB = it_mara[]
IT_FIELDCATALOG = t_fieldcat.
CREATE OBJECT W_EVENTS.
SET HANDLER : W_EVENTS->HANDLER_TOOLBAR FOR GRID,
W_EVENTS->HANDLER_USER_COMMAND FOR GRID.
CALL METHOD GRID->SET_TOOLBAR_INTERACTIVE.
ELSE.
call method grid->refresh_table_display.
ENDIF.
ENDMODULE. " pbo_module OUTPUT
*& Form BUILD_CATALOG
FORM BUILD_CATALOG .
S_FIELDCAT-COL_POS = '1'.
S_FIELDCAT-FIELDNAME = 'MARK'.
S_FIELDCAT-CHECKBOX = 'X'.
S_FIELDCAT-eDIT = 'X'.
APPEND S_FIELDCAT TO T_FIELDCAT.
CLEAR S_FIELDCAT.
S_FIELDCAT-COL_POS = '2'.
S_FIELDCAT-FIELDNAME = 'MATNR'.
S_FIELDCAT-SCRTEXT_M = 'MATERIAL'.
APPEND S_FIELDCAT TO T_FIELDCAT.
S_FIELDCAT-COL_POS = '3'.
S_FIELDCAT-FIELDNAME = 'MTART'.
S_FIELDCAT-SCRTEXT_M = 'MATERL TYPE'.
APPEND S_FIELDCAT TO T_FIELDCAT.
S_FIELDCAT-COL_POS = '4'.
S_FIELDCAT-FIELDNAME = 'MEINS'.
S_FIELDCAT-SCRTEXT_M = 'UOM'.
APPEND S_FIELDCAT TO T_FIELDCAT.
ENDFORM. " BUILD_CATALOG
*& Form BUILD_LAYOUT
text
--> p1 text
<-- p2 text
FORM BUILD_LAYOUT .
S_LAYOUT-ZEBRA = 'X'.
S_LAYOUT-CWIDTH_OPT = 'X'.
S_LAYOUT-GRID_TITLE = 'Material Details'.
ENDFORM.
" BUILD_LAYOUT////////////////////////////////////
" USER_COMMAND_0100 INPUT
*& Form FORM_USERCOMMAND
text
<--P_E_UCOMM text
form FORM_USERCOMMAND changing p_e_ucomm.
CASE P_E_UCOMM.
WHEN 'INT1'.
DO.
READ TABLE IT_MARA INDEX SY-INDEX TRANSPORTING MARK MATNR.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
IF IT_MARA-MARK = 'X'.
read table it_mara into wa TRANSPORTING MATNR MTART MEINS .
MOVE-CORRESPONDING WA TO IT_MARA1.
READ TABLE IT_MARA1 TRANSPORTING MATNR MTART MEINS .
MOVE-CORRESPONDING IT_MARA1 TO IT_MARA2.
APPEND IT_MARA2.
CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = s_layout
CHANGING
IT_OUTTAB = it_mara2[]
IT_FIELDCATALOG = t_fieldcat1.
SET PARAMETER ID 'MAT' FIELD IT_MARA-MATNR.
CALL TRANSACTION 'MM02'.
. ENDIF.
ENDIF.
ENDDO.
ENDCASE.
endform. " FORM_USERCOMMAND
*& Form FORM_TOOLBAR
text
<--P_E_OBJECT text
<--P_E_INTERACTIVE text
<--P_E_OBJECT_>MT_TOOLBAR text
FORM FORM_TOOLBAR CHANGING P_E_OBJECT TYPE REF TO
CL_ALV_EVENT_TOOLBAR_SET
P_E_INTERACTIVE
MT_TOOLBAR TYPE TTB_BUTTON.
DATA WAL_BUTTON TYPE STB_BUTTON.
*WAL_BUTTON-ICON = ICON_status_reverse.
WAL_BUTTON-TEXT = 'GO'.
WAL_BUTTON-QUICKINFO = 'PROCEED'.
waL_button-FUNCTION = 'INT1'.
WAL_BUTTON-BUTN_TYPE = 0.
WAL_BUTTON-DISABLED = SPACE.
insert WAL_BUTTON INTO P_E_OBJECT->MT_TOOLBAR index 1.
endform. " FORM_TOOLBAR
*& Module PF-STATUS OUTPUT
text
module PF-STATUS output.
set pf-status 'Z7PSTAT'.
endmodule. " PF-STATUS OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
module USER_COMMAND_0100 input.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE PROGRAM.
ENDCASE.
endmodule. " USER_COMMAND_0100 INPUT
*& Form BUILD_CATALOG1
text
--> p1 text
<-- p2 text
form BUILD_CATALOG1 .
S_FIELDCAT-COL_POS = '1'.
S_FIELDCAT-FIELDNAME = 'MATNR'.
S_FIELDCAT-SCRTEXT_M = 'MATERIAL'.
APPEND S_FIELDCAT TO T_FIELDCAT1.
S_FIELDCAT-COL_POS = '2'.
S_FIELDCAT-FIELDNAME = 'MTART'.
S_FIELDCAT-SCRTEXT_M = 'MATERL TYPE'.
APPEND S_FIELDCAT TO T_FIELDCAT1.
S_FIELDCAT-COL_POS = '3'.
S_FIELDCAT-FIELDNAME = 'MEINS'.
S_FIELDCAT-SCRTEXT_M = 'UOM'.
APPEND S_FIELDCAT TO T_FIELDCAT1.
endform. " BUILD_CATALOG1
check the below link may be useful for you
http://www.sapdevelopment.co.uk/reporting/alvhome.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
<b>Reward all helpfull answers</b>
Regards -
Hi Friends,
Let me know how to handle the event raised by clicking the hotspot of an ALV grid that is placed over one splitter container.
I am explaining the problem in detail:
(1) I have to display an ALV grid and when any hotspot of that ALV grid is clicked,
the row-id should be captured and used to fetch corresponding records from
child table (primarykey-foreign key relationship) and the resulting grid should be
displayed on the same screen at the same time and for any further click, the
child grid is to be refreshed.
(2) For this, I have created one custom container, placed one splitter container having two rows & one column over it and placed the ALV grids over that by getting the corresponding containers of the splitter.
(3) Now, when the hotspot is clicked the SY-UCOMM is empty (even it is not entering the PAI block if I do not place the back button). So, I am not able to get the row-id of the clicked row & without that, can't proceed any further.
(4) Rest of the things are working fine and I have tested that also.
Please help me out as I am new to this field and started practicing ABAP just a month back.
Thanks & Regards
Aditya P. SrivastavaHi Aditya
Here is the complete for the same,
<b>Some Prerequisites in terms of screen, custom control & flow logic</b>
<i>Screen Name: 9000, Custom Container name : CONTAINER.
flow logic in screen 9000
PROCESS BEFORE OUTPUT.
MODULE status_9000.
MODULE init_9000.
PROCESS AFTER INPUT.
MODULE user_command_9000.</i>
<b>
Here goes the code,</b>
REPORT zkb_2alv_grids.
DATA: i_t000 TYPE TABLE OF t000,
w_t000 TYPE t000,
i_tcurr TYPE TABLE OF tcurr.
Declaration for all the objects required
DATA: o_container TYPE REF TO cl_gui_custom_container,
o_splitter TYPE REF TO cl_gui_easy_splitter_container,
o_container_top TYPE REF TO cl_gui_container,
o_container_bottom TYPE REF TO cl_gui_container,
o_salv_table1 TYPE REF TO cl_salv_table,
o_salv_table2 TYPE REF TO cl_salv_table,
o_salv_columns TYPE REF TO cl_salv_columns_table,
o_salv_column TYPE REF TO cl_salv_column_table.
DATA: o_events TYPE REF TO cl_salv_events_table.
CLASS lcl_handle_events DEFINITION
CLASS lcl_handle_events DEFINITION.
PUBLIC SECTION.
METHODS: on_link_click
FOR EVENT link_click
OF cl_salv_events_table
IMPORTING row column.
ENDCLASS. "lcl_handle_events DEFINITION
CLASS lcl_handle_events IMPLEMENTATION
CLASS lcl_handle_events IMPLEMENTATION.
METHOD on_link_click.
READ TABLE i_t000 INTO w_t000 INDEX row.
SELECT * FROM tcurr
INTO TABLE i_tcurr
WHERE fcurr = w_t000-mwaer.
o_salv_table2->refresh( ).
ENDMETHOD. "lcl_handle_events
ENDCLASS. "lcl_handle_events IMPLEMENTATION
START-OF-SELECTION.
DATA: event_handler TYPE REF TO lcl_handle_events.
Select Data
SELECT * FROM t000 INTO TABLE i_t000.
CALL SCREEN 9000.
*& Module init_9000 OUTPUT
text
MODULE init_9000 OUTPUT.
DATA: lv_cx_salv_msg TYPE REF TO cx_salv_msg,
lw_bal_s_msg TYPE bal_s_msg.
IF NOT o_container IS BOUND.
Create a Custom Control
CREATE OBJECT o_container
EXPORTING
container_name = 'CONTAINER'
repid = sy-repid
dynnr = '9000'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Create splitter control
CREATE OBJECT o_splitter
EXPORTING
parent = o_container
orientation = 0
sash_position = 30
with_border = 1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Assign the left and right control that were splitted
o_container_top = o_splitter->top_left_container.
o_container_bottom = o_splitter->bottom_right_container.
ENDIF. " IF NOT o_container IS BOUND.
TRY.
CALL METHOD cl_salv_table=>factory
EXPORTING
r_container = o_container_top
IMPORTING
r_salv_table = o_salv_table1
CHANGING
t_table = i_t000.
CATCH cx_salv_msg INTO lv_cx_salv_msg.
lv_cx_salv_msg->if_alv_message~get_message(
RECEIVING
r_s_msg = lw_bal_s_msg ).
MESSAGE ID lw_bal_s_msg-msgid
TYPE lw_bal_s_msg-msgty
NUMBER lw_bal_s_msg-msgno
WITH lw_bal_s_msg-msgv1 lw_bal_s_msg-msgv2
lw_bal_s_msg-msgv3 lw_bal_s_msg-msgv4.
ENDTRY.
Column Settings
o_salv_columns = o_salv_table1->get_columns( ).
o_salv_column ?= o_salv_columns->get_column( 'MWAER' ).
o_salv_column->set_cell_type( 5 ).
o_events = o_salv_table1->get_event( ).
CREATE OBJECT event_handler.
SET HANDLER event_handler->on_link_click FOR o_events.
TRY.
CALL METHOD cl_salv_table=>factory
EXPORTING
r_container = o_container_bottom
IMPORTING
r_salv_table = o_salv_table2
CHANGING
t_table = i_tcurr.
CATCH cx_salv_msg INTO lv_cx_salv_msg.
lv_cx_salv_msg->if_alv_message~get_message(
RECEIVING
r_s_msg = lw_bal_s_msg ).
MESSAGE ID lw_bal_s_msg-msgid
TYPE lw_bal_s_msg-msgty
NUMBER lw_bal_s_msg-msgno
WITH lw_bal_s_msg-msgv1 lw_bal_s_msg-msgv2
lw_bal_s_msg-msgv3 lw_bal_s_msg-msgv4.
ENDTRY.
Display the ALV Grid
o_salv_table1->display( ).
o_salv_table2->display( ).
ENDMODULE. " init_9000 OUTPUT
*& Module user_command_9000 INPUT
text
MODULE user_command_9000 INPUT.
CASE sy-ucomm .
WHEN 'BACK' OR 'EXIT' OR 'CANC'.
SET SCREEN 0.
LEAVE SCREEN.
ENDCASE.
ENDMODULE. " user_command_9000 INPUT
*& Module status_9000 OUTPUT
text
MODULE status_9000 OUTPUT.
SET PF-STATUS '9000'.
ENDMODULE. " status_9000 OUTPUT
Regards
Kathirvel -
Controlling Font size in alv grid using oops
Hi Experts,
I have a requirement where i want to change the font size of the grid title bar.
Is there any way of acheiving this.
I do see a method set_title size in the class cl_gui_alv_grid. However it is a protected method and i am not able implement it in my program.
Any pointers on this would be higly appreciated.
Thanks and Regards,
Jey sabith EbronHi
I tried and it worked with me.
The grid title was indeed changed from the the method Set_Title_Size.
To use the method you have to Create a Local Class Inheriting the Class CL_GUI_ALV_GRID.
CLASS ZCL_GUI_ALV_GRID DEFINITION INHERITING FROM CL_GUI_ALV_GRID.
PUBLIC SECTION.
METHODS TITLE_SIZE.
PRIVATE SECTION.
ENDCLASS. "ZCL_GUI_ALV_GRID DEFINITION
Then use the above method in the Implementation part as .
CLASS ZCL_GUI_ALV_GRID IMPLEMENTATION.
METHOD TITLE_size.
ME->SET_TITLE_SIZE( EXPORTING SIZE = 1
EXCEPTIONS ERROR = 1 ).
ENDMETHOD.
ENDCLASS.
Now when your reference variable should be
Data :GRID type ref to ZCL_GUI_ALV_GRID.
and Create the Object as
CREATE OBJECT GRID
EXPORTING I_PARENT = G_CUSTOM_CONTAINER1.
Before Calling Set_table_for_ first_display, Call the created method
CALL METHOD GRID->TITLE_SIZE. -
Is there any to restrict the no of display fields in alv grid using oops?
hi,
i have 100 field in an internal table , and i passed that internal table to set_table_for_first_display, Now my aim is to display only 20 fields among that 100, these twenty may vary based on selection but count of fields should be always 20. Is it possible .....Yes!! youhave to prepare the field catalogue dynamically..based upon the selection..get the names of all the fields to be displayed ..take first twenty of them and for the rest of the fields in the internal table which are not in these twenty..mark no_out = 'X'.
-
Disbable button on alv report using oops
Hi all,
I have a button to toll bar of alv grid using oops
based on that when the user clicks on that some action is performed and list is displayed again
now when the list is diaplyed i need the button that i added to be disabled so that the user cannot click it agin
i have everything i don't know how to disable the button.
USING THIS STATMENT move 'X' to ls_toolbar-disabled WE CAN DISABLE BUT I DON'T WHERE TO PASS IT..
LOCAL CLASSES: Definition
*===============================================================
class lcl_event_receiver: local class to
define and handle own functions.
Definition:
~~~~~~~~~~~
class lcl_event_receiver definition.
public section.
methods:
handle_toolbar
for event toolbar of cl_gui_alv_grid
importing e_object e_interactive,
handle_user_command
for event user_command of cl_gui_alv_grid
importing e_ucomm.
private section.
endclass.
lcl_event_receiver (Definition)
*===============================================================
LOCAL CLASSES: Implementation
*===============================================================
class lcl_event_receiver (Implementation)
class lcl_event_receiver implementation.
method handle_toolbar.
append a separator to normal toolbar
clear ls_toolbar.
move 3 to ls_toolbar-butn_type.
append ls_toolbar to e_object->mt_toolbar.
append an icon to show booking table
clear ls_toolbar.
move 'ADD' to ls_toolbar-function.
move icon_employee to ls_toolbar-icon.
move 'Show Bookings'(111) to ls_toolbar-quickinfo.
move 'Add Material'(112) to ls_toolbar-text.
move '' to ls_toolbar-disabled.
append ls_toolbar to e_object->mt_toolbar.
endmethod.
method handle_user_command.
case e_ucomm.
when 'ADD'.
call method g_grid->get_selected_rows
importing et_index_rows = lt_rows.
call method cl_gui_cfw=>flush.
if sy-subrc ne 0.
add your handling, for example
call function 'POPUP_TO_INFORM'
exporting
titel = g_repid
txt2 = sy-subrc
txt1 = 'Error in Flush'(500).
else.
*tHIS IS THE PART IAM HAVING PROBLEM WITH
*class lcl_event_receiver implementation.
method handle_toolbar.
*clear : ls_toolbar.
loop at e_object->mt_toolbar into ls_toolbar WHERE FUNCTION = 'ADD'.
DELETE e_object->mt_toolbar FROM ls_toolbar.
move ' ' to ls_toolbar-disabled.
append ls_toolbar to e_object->mt_toolbar.
endloop.
*ENDMETHOD.
*ENDCLASS.
***tHIS IS THE PART
call method g_grid->refresh_table_display.
endif.
endcase.
endmethod.
Thanks in advanceHi
hI ALL,
MY QUESTION IS WHEN method handle_toolbaR WOULD BE TRIGERRED
first time i have the button enabled and when i press the button its get disabled.This is what i need
But iam trying to understand how this is working
Let me know whether iam right or not
when this piece of code would be triggered
method handle_toolbar.
clear ls_toolbar.
move 3 to ls_toolbar-butn_type.
append ls_toolbar to e_object->mt_toolbar.
clear ls_toolbar.
move 'ADD' to ls_toolbar-function.
move icon_employee to ls_toolbar-icon.
move 'Show Bookings'(111) to ls_toolbar-quickinfo.
move 'Add Material'(112) to ls_toolbar-text.
move ' ' to ls_toolbar-disabled.
append ls_toolbar to e_object->mt_toolbar.
IF FLAG = 'X'.
LOOP AT e_object->mt_toolbar INTO ls_toolbar.
if ls_toolbar-function = 'ADD'.
ls_toolbar-disabled = 'X'.
MODIFY e_object->mt_toolbar FROM ls_toolbar.
endif.
ENDLOOP.
ENDIF.
1 ) would this be triggered
when i call this call method g_grid->refresh_table_display.
2)or
call method g_grid->set_toolbar_interactive
This is my piece of code
class lcl_event_receiver definition.
public section.
methods:
handle_toolbar
for event toolbar of cl_gui_alv_grid
importing e_object e_interactive,
handle_user_command
for event user_command of cl_gui_alv_grid
importing e_ucomm.
private section.
endclass.
class lcl_event_receiver implementation.
method handle_toolbar.
clear ls_toolbar.
move 3 to ls_toolbar-butn_type.
append ls_toolbar to e_object->mt_toolbar.
clear ls_toolbar.
move 'ADD' to ls_toolbar-function.
move icon_employee to ls_toolbar-icon.
move 'Show Bookings'(111) to ls_toolbar-quickinfo.
move 'Add Material'(112) to ls_toolbar-text.
move ' ' to ls_toolbar-disabled.
append ls_toolbar to e_object->mt_toolbar.
IF FLAG = 'X'.
LOOP AT e_object->mt_toolbar INTO ls_toolbar.
if ls_toolbar-function = 'ADD'.
ls_toolbar-disabled = 'X'.
MODIFY e_object->mt_toolbar FROM ls_toolbar.
endif.
ENDLOOP.
ENDIF.
endmethod.
method handle_user_command.
case e_ucomm.
when 'ADD'.
call method g_grid->get_selected_rows
importing et_index_rows = lt_rows.
call method cl_gui_cfw=>flush.
if sy-subrc ne 0.
else.
perform test.
call method g_grid->refresh_table_display.
endif.
endcase.
endmethod. "handle_user_command
odule status_0100 output.
SET PF-STATUS 'STATUS'.
set pf-status 'MAIN100'.
set titlebar 'HEADER_CHECK'.
if g_custom_container is initial.
create object g_custom_container
exporting container_name = g_container.
create object g_grid
exporting i_parent = g_custom_container.
call function 'LVC_FIELDCATALOG_MERGE'
exporting
i_structure_name = 'ZTEST'
changing
ct_fieldcat = fieldcat
exceptions
others = 3
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
g_layout-sel_mode = 'A'. " TO GET SELECTION BOX
call method g_grid->set_table_for_first_display
exporting
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = g_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
it_toolbar_excluding = pt_exclude
IT_HYPERLINK =
IT_ALV_GRAPHICS =
changing
it_outtab = i_zTEST
it_fieldcatalog = fieldcat
IT_SORT =
IT_FILTER =
exceptions
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
others = 4
create object event_receiver.
set handler event_receiver->handle_user_command for g_grid.
set handler event_receiver->handle_toolbar for g_grid.
call method g_grid->set_toolbar_interactive.
endif. "IF grid1 IS INITIAL
call method cl_gui_control=>set_focus exporting control = g_grid.
endmodule. " STATUS_0100 OUTPUT
Thanks
Suchitra -
hi friendz,
can any one of u give an example, how to build alv report using oops abap ?
thanks in advance.
points for sure
regards,
VijayaHi Vijaya,
I hope the following code upto your requirement.
*& Report ZMAT_ALV_GRID *
REPORT ZCL_CLASS1.
TYPES: BEGIN OF T_MARA,
MATNR TYPE MARA-MATNR,
MAKTX TYPE MAKT-MAKTX,
WERKS TYPE MARD-WERKS,
LGORT TYPE MARD-LGORT,
LABST TYPE MARD-LABST,
END OF T_MARA.
*DATA: IT_MARA TYPE STANDARD TABLE OF T_MARA.
DATA: IT_MARA TYPE T_MARA OCCURS 0.
DATA: O_CONT TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
O_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: X_FLDCAT TYPE LVC_S_FCAT.
DATA: IT_FLDCAT TYPE LVC_T_FCAT.
DATA: I_LAYOUT TYPE LVC_S_LAYO.
DATA: X_SORT TYPE LVC_S_SORT.
DATA: I_SORT TYPE LVC_T_SORT.
TABLES: MARA.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
PARAMETERS: P_CHK AS CHECKBOX.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM GENERATE_FLDCAT.
PERFORM GENERATE_LAYOUT.
PERFORM DO_SORT.
SET SCREEN 100.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
PERFORM BUILD_ALV.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form BUILD_ALV
text
FORM BUILD_ALV .
CREATE OBJECT O_CONT
EXPORTING
CONTAINER_NAME = 'MAT_CONTAINER'
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5
others = 6.
CREATE OBJECT O_GRID
EXPORTING
I_PARENT = O_CONT
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
others = 5.
CALL METHOD O_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = ' '
IS_LAYOUT = I_LAYOUT
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
IT_OUTTAB = IT_MARA
IT_FIELDCATALOG = IT_FLDCAT[]
IT_SORT = I_SORT
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
others = 4.
ENDFORM. " BUILD_ALV
*& Form GET_DATA
text
FORM GET_DATA .
SELECT A~MATNR
B~MAKTX
C~WERKS
C~LGORT
C~LABST
INTO TABLE IT_MARA
FROM MARA AS A
INNER JOIN MAKT AS B
ON BMATNR = AMATNR
INNER JOIN MARD AS C
ON CMATNR = AMATNR
WHERE A~MATNR IN S_MATNR
AND B~SPRAS = SY-LANGU.
ENDFORM. " GET_DATA
*& Form GENERATE_FLDCAT
text
FORM GENERATE_FLDCAT .
*CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
I_STRUCTURE_NAME = 'ZSMARA'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME = ' '
CHANGING
CT_FIELDCAT = IT_FLDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
X_FLDCAT-COL_POS = 1.
X_FLDCAT-FIELDNAME = 'MATNR'.
X_FLDCAT-OUTPUTLEN = '18'.
X_FLDCAT-REPTEXT = 'Material No'.
APPEND X_FLDCAT TO IT_FLDCAT.
X_FLDCAT-COL_POS = 2.
X_FLDCAT-FIELDNAME = 'MAKTX'.
X_FLDCAT-OUTPUTLEN = '48'.
X_FLDCAT-REPTEXT = 'Material Desc'.
X_FLDCAT-TOOLTIP = 'Material Desc'.
APPEND X_FLDCAT TO IT_FLDCAT.
X_FLDCAT-COL_POS = 3.
X_FLDCAT-FIELDNAME = 'WERKS'.
X_FLDCAT-OUTPUTLEN = '5'.
X_FLDCAT-REPTEXT = 'Plant'.
X_FLDCAT-TOOLTIP = 'Plant'.
APPEND X_FLDCAT TO IT_FLDCAT.
X_FLDCAT-COL_POS = 4.
X_FLDCAT-FIELDNAME = 'LGORT'.
X_FLDCAT-OUTPUTLEN = '5'.
X_FLDCAT-REPTEXT = 'S.Loc'.
X_FLDCAT-TOOLTIP = 'S.Loc'.
APPEND X_FLDCAT TO IT_FLDCAT.
X_FLDCAT-COL_POS = 5.
X_FLDCAT-FIELDNAME = 'LABST'.
X_FLDCAT-OUTPUTLEN = '20'.
X_FLDCAT-REPTEXT = 'Quantity'.
X_FLDCAT-TOOLTIP = 'Quantity'.
X_FLDCAT-DO_SUM = 'X'.
APPEND X_FLDCAT TO IT_FLDCAT.
ENDFORM. " GENERATE_FLDCAT
*& Form GENERATE_LAYOUT
text
FORM GENERATE_LAYOUT .
I_LAYOUT-ZEBRA = 'X'.
I_LAYOUT-FRONTEND = 'X'.
I_LAYOUT-GRID_TITLE = 'ALV GRID USING OOPS'.
I_LAYOUT-NUMC_TOTAL = 'X'.
ENDFORM. " GENERATE_LAYOUT
*& Form DO_SORT
text
FORM DO_SORT .
X_SORT-FIELDNAME = 'MATNR'.
X_SORT-UP = 'X'.
X_SORT-SUBTOT = 'X'.
IF P_CHK = 'X'.
X_SORT-EXPA = SPACE.
ELSE.
X_SORT-EXPA = 'X'.
ENDIF.
APPEND X_SORT TO I_SORT.
ENDFORM. " DO_SORT
inorder to execute this code perfectly, do the following things.
1. Create a Graphical Screen 100.
2. Place a Custom Control on that screen and give name as MAT_CONTAINER.
3. activate the screen.
and execute the program.
if this suits requirement award points.
satish -
Possible to have vertical scroll bar for a cell in ALV Grid (using methods)
Hi All,
I have a field with length 100 characters on a ALV Grid (using methods)..User doesn't want to scroll all the 100 characters horizontally to see the whole text rather he wants to have a vertical scroll bar for the cell so that he can scroll vertically.
Is it possible to have split the cell text into lines and have a vertical scroll bar for a cell in ALV Grid?
Regards
Jaker.Thanks for the suggestion Balu.I tried this , but while scrolling,headers also getting scrolled.
Becoz of this , if i scroll down to the last row,headers are getting hidden.
Headers should always be static.only the data should scroll.
Since h:datatable is being rendered as one table , i can div tag for this table alone.
If i have seperate datatable for headers alone i can do this .But i should not use two datatables. -
Static Group headers while scrolling "Down"
Finally got Row Header to stay present while "scrolling down".
Now I would like to have the 1st group row also remain present while scrolling down in the details. Any
options?Hi Marzipan24,
Sorry for misunderstanding you question in my former reply.
In a table, if we want to freeze column header, we should make the changes in the first Static row group in Row Groups pane with Advanced Mode. For more details, please see:
In the Grouping pane, click the arrow that appears to the right of the Column Groups label, and click Advanced Mode to display all groups. You have done this according to the picture you posted.
In the Row Groups sections, click the first Static group, and then in the Properties window, set the RepeatOnNewPage property to True.
The following screenshot is for your reference:
Besides, if we want to freeze column header in a matrix, we can enable “Repeat header columns on each page” and “Keep header visible while scrolling” options in Column Headers in Tablix Properties dialog box.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to read the whole name of a music title while scrolling down a list of titles? The old software-app had the function to click for a longer time on a titles beginning letters until a black box revealed the entire name. I miss this function especially for my classical music, because lots of pieces start with similar words. E.g.:
"Beethoven: Variations On "Ein Mädchen Oder Weibchen", Op. 66 - Var. 1"
"Beethoven: Variations On "Ein Mädchen Oder Weibchen", Op. 66 - Var. 2"
Scrolling in a list of title, I can't distinguish the titles, because just the first words are shown followed by: "...".
That's horrible!Or you could include a width to your body style:
body {
background-image: url(Logo/sky1.jpg);
background-position: center center;
background-attachment: fixed;
width: 75%;}
It might work or not depending on your other color scheme. -
Error whil adding Header to the ALV grid using OO
Hi Guys,
I want to display the Header for the ALV grid using Splitter .
when i am doing like that .I am getting a screen on the top of that screen I am getting a EMPTY screen .I don't know why likat.
What i need is just to display a Grid with header?Can anybody Please help me reagarding this problem.
the Code is Below.
*& Report Z_TEST_PGM
REPORT Z_TEST_PGM NO STANDARD PAGE HEADING
LINE-SIZE 120 MESSAGE-ID zotc.
Tables : CKMLMV003 , CKMLMV001.
TYPE-POOLS: slis.
Types : Begin of t_CKMLMV003_out,
WERKS type CKMLMV003-WERKS,
MATNR type CKMLMV003-MATNR,
MISCH_VERH type CKMLMV003-MISCH_VERH,
KALNR_BAL type CKMLMV003-KALNR_BAL,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
MGTYP type CKMLMV003-MGTYP,
End of t_CKMLMV003_out,
Begin of t_CKMLMV001_out,
MATNR type CKMLMV001-MATNR,
KALNR type CKMLMV001-KALNR,
LIFNR_ND type CKMLMV001-LIFNR_ND,
EKORG_ND type CKMLMV001-EKORG_ND,
End of t_CKMLMV001_out,
Begin of t_CKMLMV003_Temp,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
End of t_CKMLMV003_Temp,
Begin of t_Final_out,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
WERKS type CKMLMV003-WERKS,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out,
Begin of t_Final_out1,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out1.
Global Structures *
Data : i_CKMLMV003_str type t_CKMLMV003_out,
i_CKMLMV001_str type t_CKMLMV001_out,
i_Final_str type t_Final_out,
i_Final_str1 type t_Final_out,
i_CKMLMV003_Temp type t_CKMLMV003_Temp.
Global Internal Tables *
Data : i_CKMLMV003_out type standard table of t_CKMLMV003_out,
i_CKMLMV001_out type standard table of t_CKMLMV001_out,
i_Final_out type standard table of t_Final_out,
i_Final_out1 type standard table of t_Final_out.
ALV Report Internal tables *
DATA : t_fieldcatalog TYPE slis_t_fieldcat_alv,
s_fieldcatalog TYPE slis_fieldcat_alv,
t_basic_fieldcatalog TYPE slis_t_fieldcat_alv,
s_basic_fieldcatalog TYPE slis_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv,
v_repid TYPE sy-repid.
*ALV Header declarations
Data: t_header type slis_t_listheader,
i_header_str type slis_listheader,
i_line_event_str TYPE slis_alv_event,
i_events TYPE slis_t_event,
wa_layout type slis_layout_alv.
Data : grid1 type ref to cl_gui_alv_grid,
g_custom_container1 type ref to cl_gui_custom_container,
grid2 type ref to cl_gui_alv_grid,
g_custom_container2 type ref to cl_gui_custom_container,
i_FCAT TYPE LVC_T_FCAT,
i_FCAT_str type lvc_s_fcat,
Structure for layout
i_layout_s TYPE lvc_s_layo,
gt_final1 type table of t_Final_out.
DATA: CCCONTAINER1 TYPE SCRFNAME VALUE 'CCCONTAINER1',
CCCONTAINER2 TYPE SCRFNAME VALUE 'CCCONTAINER2',
G_PARENT_TOP TYPE REF TO CL_GUI_CONTAINER ,
G_SPLITTER TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
G_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT,
G_PARENT_GRID TYPE REF TO CL_GUI_CONTAINER.
Global Variables *
Data :cnt(4) type n value '0',
g_plant type CKMLMV003-WERKS ,
g_QuanTStr type CKMLMV003-MGTYP ,
g_PurchOrg type CKMLMV001-EKORG_ND,
flag type n value '0',
g_cnt6 type n value '0',
g_cnt7 type n value '0',
g_cnt8 type n value '0',
g_cnt9 type n value '0',
g_cnt10 type n value '0',
g_cnt11 type n value '0',
g_cnt12 type n value '0',
g_cnt13 type n value '0'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-011.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-006 for field s_matnr.
Select-Options : S_MATNR for CKMLMV003-MATNR .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-007 for field S_WERKS.
SELECT-OPTIONS:S_WERKS for CKMLMV003-WERKS Default '2003'.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-008 for field S_GJAHR.
SELECT-OPTIONS:S_GJAHR for CKMLMv003-GJAHR default Sy-DATUM(4) .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-009 for field S_PERIO.
SELECT-OPTIONS:S_PERIO for CKMLMV003-PERIO .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(25) TEXT-010 for field P_MGTYP.
Parameters : P_MGTYP type CKMLMV003-MGTYP .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK b1 .
At Selection-Screen on s_matnr .
Perform Validate_MatNumber.
At Selection-Screen on s_werks .
Perform Validate_CostingPlant.
At Selection-Screen on s_GJAHR .
Perform Validate_FiscalYear.
At Selection-Screen on s_PERIO .
Perform Validate_Period.
At Selection-Screen on p_MGTYP .
Perform Validate_QuantityStrType.
*& Form Validate_MatNumber
text
Form Validate_MatNumber.
DATA l_MATNR TYPE CKMLMV003-MATNR.
IF NOT S_MATNR[] IS INITIAL .
CLEAR L_MATNR.
SELECT single MATNR FROM CKMLMV003
INTO l_MATNR
WHERE MATNR = s_MATNR-LOW or MATNR = s_MATNR-HIGH.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Material Number'(001).
ENDIF.
ENDIF.
ENDFORM. "Validate_MatNumber
*& Form Validate_CostingPlant
text
Form Validate_CostingPlant.
DATA l_werks TYPE CKMLMV003-WERKS.
IF NOT S_WERKS[] IS INITIAL .
CLEAR L_WERKS.
SELECT single WERKS FROM T001W
INTO l_WERKS
WHERE WERKS = s_WERKS-low or WERKS = s_WERKS-high.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Costing Plant'(002).
ENDIF.
ENDIF.
ENDFORM. "Validate_CostingPlant
*& Form Validate_FiscalYear
text
Form Validate_FiscalYear.
DATA l_GJAHR TYPE CKMLMV003-GJAHR.
IF NOT S_GJAHR-low IS INITIAL or S_GJAHR-high IS INITIAL.
CLEAR L_GJAHR.
SELECT SINGLE GJAHR FROM CKMLMV003
INTO l_GJAHR
WHERE GJAHR LE sy-DATUM(4) .
IF NOT S_GJAHR-low LE sy-DATUM(4) or S_GJAHR-high LE sy-DATUM(4).
MESSAGE e999 WITH
'Enter a Valid Fiscal year'(003).
ENDIF.
ENDIF.
ENDFORM. "Validate_FiscalYear
*& Form Validate_Period
text
Form Validate_Period.
DATA l_PERIO TYPE CKMLMV003-PERIO.
IF NOT S_PERIO[] IS INITIAL .
CLEAR L_PERIO.
SELECT single PERIO FROM CKMLMV003
INTO l_PERIO
WHERE PERIO GE 1 and PERIO LE 12 .
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Period'(004).
ENDIF.
ENDIF.
ENDFORM. "Validate_Period
*& Form Validate_QuantityStrType
text
Form Validate_QuantityStrType.
DATA l_MGTYP TYPE CKMLMV003-MGTYP.
IF NOT p_MGTYP IS INITIAL.
CLEAR L_MGTYP.
SELECT SINGLE MGTYP FROM CKMLMV003
INTO l_MGTYP
WHERE MGTYP = p_MGTYP .
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Quantity Structure Type'(005).
ENDIF.
ENDIF.
ENDFORM. "Validate_QuantityStrType
INITIALIZATION of Fields
Class LCL_EVENT_HANDLER DEFINITION.
Public section.
Methods:
TOP_OF_PAGE for Event TOP_OF_PAGE OF CL_GUI_ALV_GRID
IMPORTING E_DYNDOC_ID.
ENDCLASS. "LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD TOP_OF_PAGE.
Top-of-page event <br />
PERFORM EVENT_TOP_OF_PAGE USING G_DYNDOC_ID.
ENDMETHOD. "top_of_page
ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
Data : G_HANDLER TYPE REF TO LCL_EVENT_HANDLER.
Initialization.
v_repid = sy-repid.
Start-of-Selection.
Perform get_CKMLMV003.
Perform get_CKMLMV001.
Perform Get_Finaldata.
Perform Layout_FieldCatalog.
call screen '101'.
Perform ALVGrid_Final_Display.
*& Form Layout_FieldCatalog
text
Form Layout_FieldCatalog.
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-024.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'GJAHR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-012.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'PERIO'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-013.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 4.
s_fieldcatalog-fieldname = 'WERKS'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-025.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 5.
s_fieldcatalog-fieldname = 'LIFNR_ND1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-014.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 6.
s_fieldcatalog-fieldname = 'MISCH_VERH1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-015.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 7.
s_fieldcatalog-fieldname = 'LIFNR_ND2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-016.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 8.
s_fieldcatalog-fieldname = 'MISCH_VERH2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-017.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 9.
s_fieldcatalog-fieldname = 'LIFNR_ND3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-018.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 10.
s_fieldcatalog-fieldname = 'MISCH_VERH3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-019.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 11.
s_fieldcatalog-fieldname = 'LIFNR_ND4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-020.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 12.
s_fieldcatalog-fieldname = 'MISCH_VERH4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-021.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 13.
s_fieldcatalog-fieldname = 'LIFNR_ND5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'MISCH_VERH5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
if g_cnt6 <> '0'.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'LIFNR_ND6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 15.
s_fieldcatalog-fieldname = 'MISCH_VERH6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt7 <> '0'.
s_fieldcatalog-col_pos = 16.
s_fieldcatalog-fieldname = 'LIFNR_ND7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 17.
s_fieldcatalog-fieldname = 'MISCH_VERH7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt8 <> '0'.
s_fieldcatalog-col_pos = 18.
s_fieldcatalog-fieldname = 'LIFNR_ND8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 19.
s_fieldcatalog-fieldname = 'MISCH_VERH8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt9 <> '0'.
s_fieldcatalog-col_pos = 20.
s_fieldcatalog-fieldname = 'LIFNR_ND9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 21.
s_fieldcatalog-fieldname = 'MISCH_VERH9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt10 <> '0'.
s_fieldcatalog-col_pos = 22.
s_fieldcatalog-fieldname = 'LIFNR_ND10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 23.
s_fieldcatalog-fieldname = 'MISCH_VERH10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt11 <> '0'.
s_fieldcatalog-col_pos = 24.
s_fieldcatalog-fieldname = 'LIFNR_ND11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 25.
s_fieldcatalog-fieldname = 'MISCH_VERH11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt12 <> '0'.
s_fieldcatalog-col_pos = 26.
s_fieldcatalog-fieldname = 'LIFNR_ND12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 27.
s_fieldcatalog-fieldname = 'MISCH_VERH12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt13 <> '0'.
s_fieldcatalog-col_pos = 29.
s_fieldcatalog-fieldname = 'LIFNR_ND13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 30.
s_fieldcatalog-fieldname = 'MISCH_VERH13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
ENDFORM. "Layout_FieldCatalog
*& Form get_CKMLMV003
text
Form get_CKMLMV003.
Select WERKS
MATNR
MISCH_VERH
KALNR_BAL
GJAHR
PERIO
MGTYP
from CKMLMV003
into table i_CKMLMV003_out
Where ( MATNR in s_MATNR and
WERKS in s_WERKS and
GJAHR in s_GJAHR and
PERIO in s_PERIO and
MGTYP = p_MGTYP ).
Sort i_CKMLMV003_out by MATNR KALNR_BAL.
ENDFORM. "get_CKMLMV003
*& Form get_CKMLMV001
text
Form get_CKMLMV001.
If Not i_CKMLMV003_out is Initial.
Select MATNR
KALNR
LIFNR_ND
EKORG_ND
from CKMLMV001
into Table i_CKMLMV001_out
for all entries in i_CKMLMV003_out
Where ( KALNR = i_CKMLMV003_out-KALNR_BAL
and WERKS = i_CKMLMV003_out-WERKS
and MATNR = i_CKMLMV003_out-MATNR ).
sort i_CKMLMV001_out by MATNR KALNR.
ENDIF.
ENDFORM. "get_CKMLMV001
*& Form Get_Finaldata
text
Form Get_Finaldata.
Loop at i_CKMLMV001_out into i_CKMLMV001_str.
Loop at i_CKMLMV003_out into i_CKMLMV003_str.
If ( i_CKMLMV001_str-KALNR = i_CKMLMV003_str-KALNR_BAL and i_CKMLMV003_str-MATNR = i_CKMLMV001_str-MATNR ) .
If ( flag = 0 ).
g_plant = i_CKMLMV003_str-WERKS.
g_PurchOrg = i_CKMLMV001_str-EKORG_ND.
g_quantstr = i_CKMLMV003_str-MGTYP.
flag = 1.
ENDIF.
Move i_CKMLMV003_str-MATNR to i_Final_str-MATNR.
Move i_CKMLMV003_str-WERKS to i_Final_str-WERKS.
Move i_CKMLMV003_str-GJAHR to i_Final_str-GJAHR.
Move i_CKMLMV003_str-PERIO to i_Final_str-PERIO.
Move i_CKMLMV003_str-MISCH_VERH to i_Final_str-MISCH_VERH1.
Move i_CKMLMV001_str-LIFNR_ND to i_Final_str-LIFNR_ND1.
Move-Corresponding i_CKMLMV003_str to i_CKMLMV003_temp.
Append i_Final_str to i_Final_out.
Clear : i_CKMLMV003_str .
ENDIF.
ENDLOOP.
Clear : i_CKMLMV001_str , i_Final_str , i_CKMLMV003_temp.
ENDLOOP.
Sort i_Final_out by WERKS MATNR GJAHR PERIO .
Loop at i_Final_out into i_Final_str.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO and i_Final_str-WERKS = i_Final_str1-WERKS.
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
When 6.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH6.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND6.
g_cnt6 = 1.
When 7.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH7.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND7.
g_cnt7 = 1.
When 8.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH8.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND8.
g_cnt8 = 1.
When 9.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH9.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND9.
g_cnt9 = 1.
When 10.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH10.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND10.
g_cnt10 = 1.
When 11.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH11.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND11.
g_cnt11 = 1.
When 12.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH12.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND12.
g_cnt12 = 1.
When 13.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH13.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND13.
g_cnt13 = 1.
ENDCASE.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO .
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
ENDCASE.
**Move-Corresponding i_Final_str to i_Final_str1.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
ENDFORM. "Get_Finaldata
*& Form top_of_page
text
Form top_of_page.
clear t_header.
refresh t_header.
i_header_str-typ = 'H'.
I_header_Str-info = Text-035.
append I_header_str to t_header.
clear I_header_str.
Date
I_header_str-typ = 'S'.
I_header_str-key = Text-036.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO I_header_str-info. "todays date
append I_header_str to t_header.
clear: I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Quantity Structure Type :'.
I_header_Str-info = g_QuantStr.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Purchase Org :'.
I_header_Str-info = g_PurchOrg.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Plant :'.
I_header_Str-info = g_Plant.
append I_header_str to t_header.
clear I_header_str.
CLEAR i_line_event_str.
i_line_event_str-name = 'TOP_OF_PAGE'.
APPEND i_line_event_str TO i_events.
call function 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
ENDFORM. "top_of_page
*& ALVGrid_Final_Display
Form ALVGrid_Final_Display.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_DEFAULt = c_valx
i_callback_top_of_page = 'TOP_OF_PAGE'
i_Save = c_valx
it_fieldcat = t_fieldcatalog
it_sort = t_sort
it_events = I_events
TABLES
t_outtab = i_final_out1.
ENDFORM. "ALVGrid_Final_Display
*& Form ALVGRID_OO_Display
text
Form ALVGRID_OO_Display.
i_FCAT_str-col_pos = 1.
i_FCAT_str-fieldname = 'MATNR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-seltext = 'MATERIAL'.
i_fcat_str-scrtext_m = Text-024.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 2.
i_FCAT_str-fieldname = 'GJAHR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-012.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 3.
i_FCAT_str-fieldname = 'PERIO'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-013.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 4.
i_FCAT_str-fieldname = 'WERKS'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-025.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 5.
i_FCAT_str-fieldname = 'LIFNR_ND1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-014.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 6.
i_FCAT_str-fieldname = 'MISCH_VERH1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-015.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 7.
i_FCAT_str-fieldname = 'LIFNR_ND2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-016.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 8.
i_FCAT_str-fieldname = 'MISCH_VERH2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-017.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 9.
i_FCAT_str-fieldname = 'LIFNR_ND3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-018.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 10.
i_FCAT_str-fieldname = 'MISCH_VERH3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-019.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 11.
i_FCAT_str-fieldname = 'LIFNR_ND4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-020.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 12.
i_FCAT_str-fieldname = 'MISCH_VERH4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-021.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 13.
i_FCAT_str-fieldname = 'LIFNR_ND5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 14.
i_FCAT_str-fieldname = 'MISCH_VERH5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
if g_cnt6 <> '0'.
i_FCAT_str-col_pos = 15.
i_FCAT_str-fieldname = 'LIFNR_ND6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 16.
i_FCAT_str-fieldname = 'MISCH_VERH6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
ENDIF.
*if not grid1 is Initial.
If sy-SUBRC = 0.
Call Method grid1->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
CALL METHOD G_DYNDOC_ID->INITIALIZE_DOCUMENT
EXPORTING
BACKGROUND_COLOR = CL_DD_AREA=>COL_TEXTAREA.
Processing events <br />
CALL METHOD GRID1->LIST_PROCESSING_EVENTS
EXPORTING
I_EVENT_NAME = 'TOP_OF_PAGE'
I_DYNDOC_ID = G_DYNDOC_ID.
Call Method grid2->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
Endform. "ALVGRID_OO_Display
Form EVENT_TOP_OF_PAGE using DG_DYNDOC_ID
TYPE REF TO CL_DD_DOCUMENT.
DATA : DL_TEXT(255) TYPE C.
CALL METHOD DG_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = 'Flight Details'
SAP_STYLE = CL_DD_AREA=>HEADING
SAP_FONTSIZE = CL_DD_AREA=>LARGE
SAP_COLOR = CL_DD_AREA=>LIST_HEADING_INT.
Endform.
*& Module STATUS_0101 OUTPUT
text
MODULE STATUS_0101 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
Create Object G_DYNDOC_ID
EXPORTING STYLE = 'ALV_GRID'.
if g_custom_container1 is initial .
create object g_custom_container1
Exporting
Container_name = CCCONTAINER1
Exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
Others = 5.
Create Object G_SPLITTER
Exporting PARENT = g_custom_container1.
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 1
COLUMN = 1
RECEIVING
CONTAINER = G_PARENT_TOP.
*Assigning the Part 2 to GRID
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 2
COLUMN = 1
RECEIVING
CONTAINER = g_parent_grid.Hi,
Check if any event is triggered from the event handler class, upon selection.
Usually, the events are handled on double click or on hotspot etc.
Regards,
Satish Kanteti
Maybe you are looking for
-
Format of the analytic reports changed in OBIEE11g after restart.
Hi all, After restarting the BI server, the format of the reports changed. The analytic reports header font sizes has been increased and the report is not showing in tabular view instead it is showing results as in a notepad. What might be the issue
-
To edit a billing plan with VA02
Hi, I need help because I would like to print a billing plan with VA02. I 'm going to link this billing plan with output types of my sales order. For example, when I save my sales order, I would like that the billing plan print automatically. Somebod
-
Trouble viewing QT files shot in HD -audio is fine though
I am having some issues with some HD video I am attempting to edit. It was shot on 3 cams, 2 in 1080i50 and one in 720p. The shooter loaded all of the files into what appears to be quicktime. Only thing is, I pull up the video and all I get is a blan
-
Problem shrinking a temporary tablespace
I have a temporary tablespace in 10.1.0.3 I need to shrink. I need to shrink the database. 1. I change all users that user that temporary tablespace to a new temporary tablespace 2. Tried to shrink it but got ERROR at line 1: ORA-03297: file contains
-
Trouble with live monitoring my overdubbs.
im using an 8 track presonus firpod that connects through firwire to my computer (obviously). Im trying to do a vocal overdub but I cant figure out how to hear the mix while hearing what I am recording at the same time. I'm ending up having to outp