Freezes after few mins. + how to enable Turobo mode/Ultra-Turbo

hello,
here's my system spec :
MSI 875P NEO-FIS2R
Intel PIV 2.6 C Ghz FSB800 (Ht enabled)
2x256 MB DDR400
Maxtor 80 GB S-ATA 150
MSI Starforce FX 5900 Ultra 256 DDR
CD-RW 52x32x52
i have just OC'ed my CPU from 2.6 to 2.8 the default settings were : 203 x 13.0
i have OC'ed the FSB to 215, so now it's 215 x 13.0. i've also tried 231 x 13.0 to have 3.0 Ghz, but that didn't work, i disconnected everything, took out the battery for 15 mins., replaced it and booted again, and everything was normal again. (back at 2.6 Ghz). but i also noticed that i lost all my BIOS settings... . so i just changed everything that i still could remember and turned back to 215 fsb instead off the 231... . now here's the prob : my system runs just fine with the 2.8 Ghz(OC'ed), i have ran some heavy benchmarks and it's all fine and stable, but sometimes my system just freezes, doing nothign, only the fans keep spinning and my monitor just hangs, not black, but with the last image...my question is : does this happen beacuse i OC'ed it or have i forgot to change anything in the BIOS ?? so, is it BIOS-related or OC-related ?
second question : how do i enable the Turbo mode or Ultra-Turbo ?
greetz

Yes you have to first make sure that you take it nice and easy when you OC, Go up in small steps and stay there for a while, play a game run a benchmark, whatever....You just want to make sure that your PC remains stable and Most important runs COOL ......The one thing that you must change in your BIOS is the DRAM(VDIMM) voltage to 2.7 Volts...That will Most likely stop your Freez-ups....And in order to enable Turbo or Ultra-Turbo....It is on the Frequency and voltage Page at the Top.....These settings are going to tighten up your Memory Timings, so you should start with a Non-Overclocked FSB, And try to enable Fast, or Turbo.....You should do a search on these Subjects in the Forum, as there are Quite a Few......Just remember to go slow and not get greedy, or you might harm your System ...............Sean REILLY875

Similar Messages

  • My web cam freezes after few min in yahoo messenger

    i am having apple macbook in yahoo messneger when i connect with the other party, my picture freezes (with the last image in the window), but I can see and hear the other person im talking with. They can also still hear me, but with a frozen picture. I hang up every few minutes and call them back until it freezes again.please help me how to solve this

    I am not getting any solutions of my questions......

  • Web cam freezes after few min in yahoo messenger

    i am having apple macbook in yahoo messneger when i connect with the other party, my picture freezes (with the last image in the window), but I can see and hear the other person im talking with. They can also still hear me, but with a frozen picture. I hang up every few minutes and call them back until it freezes again.please help me how to solve this

    I am not getting any solutions of my questions......

  • TS3367 Facetime and skype freezes after few minutes

    I have Ipad2 with ISO 5.1.1 over the last one months face time and skype freezes after few min, I reintaslled skyped. but no luck , Before every thing worked fine. I synchronised with itune and updated still no luck. Can any one helps me please. I tried to use to contact USA , CANADA , PAK no luck

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

    After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

    I had this same problem with what's app.  There is a new update for the app on the app store which is compatible with ios8.  Update the app, or delete it and re-add it.  I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.

  • T400 downgraded from Vista to XP resulting in system freeze after 10 min activity

    Hi,
    I just purchased a T400 and have gone through the process of (re)grading the OS from Vista Business to XP. From the moment the setup dialogue for XP started (machine name, date, users etc), the whole systems freezes after working the machine for around 10-15 min. First, I suspected it to be a mouse freeze, but I get no reponse from neither the keyboard nor mouse (not sure if it is a complete system freeze or to do with mouse/keyboard drivers). Even the clock in the bottom right corner stops running.
    To get the system going I need to force the system to reboot using the power on/off button.
    The XP restore disc I used came from Lenovo with the computer, and I have followed the instructions by point. Do any of you recognize this problem? And more importantly, know how to deal with it
    Message Edited by Missmostly on 10-16-2008 06:28 AM
    Message Edited by Missmostly on 10-16-2008 08:56 AM

    Hi,
    I posted a message on the forum 5 days ago, and got no replies.  I agree the  problem description might be a bit vague, so here we  go again:
    I recently purchased a T400 (model 2765, 21g) with the XP downgrade option (the MS Windows XP Conversion Kit containing 2 CD's: Lenovo's Rescue &  Recovery plate + XP product recovery plate with SP2). During the installation of XP (the end part where you set up your user) the computer freezes (no response from keyboard). I power the machine off and on again, and the installation continues as it were. I finish the installation and the computer is set. After additional 10 min the computer freezes again in the same style.
    I imagine it to be a powermanagement disagreement between MS system and Lenovos powermanagement system, and set every parameter to be always ON and full performance ( I am running on AC). This time the freeze doesn't happen for an hour. I then begin to reinstall the powermanagement drivers and the general drivers for this particular model running XP (from Lenovos drivers Matrix), and now I am looking at two hour before each freeze. That is if I don't plug in any external hard drives (then the system can crash within 15 min or an hour), and we turn a blind eye to the occational freeze after 10 min on the first boot of the day .
    At some point I suspected there to be a conflict with the existing SATA drivers that I also have reinstalled for the occation.  Still the system is NOT stable.
    And the frustrating thing is that I have no clue why. The sympthom is always the same, complete screen freeze ( I do not know if the system is active behind (no hard drive running)), that can only be cured with a forced boot.
    If any of you reconize this, please assist me to a solution. I have by now installed all programs to my liking including all MS updates (SP3 etc), and hope there is a way to get to the core without a complete reinstall (or worse, return to the realm of Vista) 

  • My wi-fi connection is good & i want restore my iphone.But a massage flash after few min-iPhone could not be activated because the activation server is temporarily unavailable." SIM is in searching mode. What i can do.?

    My wi-fi connection is good & i want restore my iphone.But a massage flash after few min-iPhone could not be activated because the activation server is temporarily unavailable." SIM is in searching mode. What i can do.?

    You had a jailbreak and unlock.
    When you updated you cooked it.
    Your phone is done.
    Time for a new one.

  • I am using apple iPod-suffle model and I am unable to upload music into iPod and 3 lights(green,orange and red) keeps blinking for few seconds when I connect my iPod to my PC and after few seconds its turn to unresponce mode,Plz help to find out solution

    I am using apple iPod-suffle model,I am unable to upload music into iPod and 3 lights(green,orange and red) keeps blinking for few seconds when I connect my iPod to my PC and after few seconds its turn to unresponce mode,Plz help to find out solution.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • How to enable private mode from commandline, with an URL. I am a software dev and I wish to have my application open links in Firefox. Using ShellExecute(), i c

    How to enable private mode from commandline, with an URL.
    I am a software dev and I wish to have my application open links in Firefox.
    Using ShellExecute(), i can do with with commandlines like:
    firefox.exe http://support.mozilla.org
    But I also want the option to open the link in private mode.
    I am able to start firefox in private mode by doing this:
    firefox.exe -private
    However, if I add a link to the command line
    firefox.exe -private http://support.mozilla.org
    I get strange results.
    If firefox is not running, it launches 2 copies of the application.
    One that opens in private mode and the other opens in normal mode and goes to the URL specified.
    If firefox is already running, it just opens the URL in a new tab.
    No private mode instance is launched.
    Am I using the command-line syntax incorrectly?

    It will never work if Firefox is already running as Firefox will use the already opened Firefox instance.<br />
    In that case only using a separate profile will work.
    You can try to specify the -url switch as well.
    *firefox.exe -private -url http://support.mozilla<i></i>.org
    You can also look at the -new-tab switch.
    *firefox.exe -private -new-tab http://support.mozilla<i></i>.org
    *https://developer.mozilla.org/en/Command_Line_Options

  • How to enable kiosk mode on windows 7

    hi
    How to enable kiosk mode on windows 7 ?
    i need to a sample that when windows be load Disable below things
     Task Manager
     Driver
     Task Bar
     Combine Keys for example (Alt + Tab , Alt + F4 and ....)
    please help me for solve it 
    it's urgent
    thanks

    Hi vahidbakhtiary,
    As the reply from Monkeyboy, you could modify registry settings on systems to achieve what you want. There are many demo code online which showed us how to modify registry settings.
    hi
    How to enable kiosk mode on windows 7 ?
    i need to a sample that when windows be load Disable below things
     Task Manager
     Driver
     Task Bar
     Combine Keys for example (Alt + Tab , Alt + F4 and ....)
    please help me for solve it 
    it's urgent
    thanks
    These options might be dangerous. If someone who knew nothing about the program with this function and he uses this program, it might hurt his system. Since this, it would be better not to post this code in the forum to avoid someone tried the code and hurt
    his system.
    Thanks for your understanding.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • How to enable Tasks mode tab in Oralce Depot Repair

    Want to create repair by using tasks.
    Please let me know how to enable Tasks mode tab in Oralce Depot Repair
    Ashish

    Look for a System Profile under CSD... there you should be able to setup the TASK mode for Depot Repair.
    Hope it helps.
    Jose

  • How to enable tasks mode in Depot Repair.

    Want to use task mode tab in oracle.
    How to enable it. Is there any profile option?
    Ashish

    Ashish_Inda_99 wrote:
    Want to use task mode tab in oracle.
    How to enable it. Is there any profile option?
    AshishPlease don't post duplicates -- How to enable Tasks mode tab in Oralce Depot Repair

  • Equium P200D how to enable SATA mode to AHCI so i can install OSx86

    Hi im trying to install OSx86 on my new Equium P200D-139 laptop that i bought this week.
    I need to set SATA mode to AHCI. All other pc's i have used i have been able to do this in the bios but with this laptop the bios is so cut down the option isnt there.
    Does anyone know how to enable AHCI mode so i can get OSx86 to boot.
    Thanks
    Mark

    If I'm not mistaken, you get the famous "Still waiting for root device" message, right?
    Well, I really do not have many experience in Mac operating systems, but this appears because of SATA drives and yes, you are right, AHCI mode works for most notebooks or desktop PCs.
    I think there is no way to enable this option. But maybe you can find help looking for some instructions on osx86project in google.

  • How to enable debug mode?

    Hi
    We are doing some web dynpro development.
    Can anyone tell me ho to enable debug mode in the server
    Thanks
    Vijay

    Hi,
    Check this blog, for some idea how to use configtool to set debug mode:
    NetWeaver Portal Debugging
    How to enable debug mode?
    I see that you are new to this forum, first of all welcome to SDN.
    I see that you have posted alot of questions today, really appreciate your interest in learning new stuff.
    SDN is a great forum to start with but my suggestion is to first search the forum for answers to your questions before posting them, this way you will help yourself instead of waiting for people to help you out.
    Greetings,
    Praveen Gudapati
    [Points are always welcome for helpful answers]

  • Ask your question here...how to enable legacy mode in e1-510 (Z5WE3).

    how to enable legacy mode in e1-510  (Z5WE3).

    first of all you need to update BIOS at least to 2.11, this is the link for 2.12http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_2.12_A_A.zip?acerid=635677775458144547&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE%20E1-510&OS=ALL&LC=en&BC=ACER&SC=PA_6 once you updated to 2.12, you will find an option on BIOS to enable Legacy mode.

Maybe you are looking for

  • IPod no longer registering in Windows or iTunes

    I am registering this as a new thread as the previous two related threads are marked as answered and it is obvious from the content that they are definitely not! I have a problem with my 30GB iPod no longer registering in Windows or in iTunes since I

  • Changing default color scheme when exporting ALV report to Excel spreadshee

    Hi all, We have a bunch of FI reports created using OOPS in abap.  Each of the reports has the functionality to be exported to an excel spreadsheet.  When exporting to Excel, the headers are a very dark brown color, making them difficult to read and

  • How to implement VOIP using sip in j2me

    hi, i have create sip session. now i want to use it for VOIP using j2m. how can i do this. i mean which APIs are helpful in developing it. i hav following questions 1. how can i get sound from mic to use in app and in which format 2. is it ok to buff

  • Learned controller assignments often get stuck in Logic.... (?)

    Hey guys, when use hardware controllers for controlling parameters of softsynths in Logic, I find that the software knobs often get stuck while moving them. I can not see a pattern to this behaviour, but it happens if I learn assignments within Logic

  • Radio not showing up

    i got my nano yesterday and i was looking for the radio but its not showing up on my main screen or my music screen so i went to settings and then general went to see if the radio was in my main screen or music screen and i saw it so i clicked now th