Freezes computer during inital plug in

freezes computer during inital plug in. Windows ZP, reinstalled drivers, newest ITUNES downloaded. bottom right of my screen says new hardware found. Ipod beeps once and computer freezes. Ipod nano works fine. What will fix this?

These may help. The Vita/Win& one gives a link for XP.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device

Similar Messages

1TB Canvio freezing computer during boot up

I have a new Canvio 1TB Ext HD HDTC710XK3A1. My desktop computer will freeze up during boot up if the Canvio is plugged into USB port. Unplugged the computer will boot up OK. I have also tried this on my laptop and the problem also occurs. If I plug in the Canvio after computers are up and running the computers work OK untill the next boot up so I have to disconnect after I shut down the computer. Any fix for this problem so I can leave the Canvio plugged in all of the time?

Reset PRAM.
http://support.apple.com/kb/PH4405

Sophos freezes computer during scan

I've tried 4 scans now and my computer freezes midway through each. I'm unable to force quit or open activity monitor to kill the process, I have to force shutdown by holding the power button. My computer is not freezing at any other point during normal use, it's only midway through a scan. I'm running 10.10.4 (the beta), are there any bugs known to cause this? When it freezes up it says 'issues detected', but I understand this is a common message.

jrae123 wrote:
I've tried 4 scans now and my computer freezes midway through each. I'm unable to force quit or open activity monitor to kill the process, I have to force shutdown by holding the power button.
My computer is not freezing at any other point during normal use, it's only midway through a scan.
I'm running 10.10.4 (the beta), are there any bugs known to cause this?
When it freezes up it says 'issues detected', but I understand this is a common message.
The list of issues is in the scan log. But its probably not relevant.
We are not aware of issues with 10.10.4. Do you get any messages in your system.log contaning the text EWOULDBLOCK?

HT1320 why does my iPod classic freeze up when i plug it in to my computer

why does my iPod classic freeze up when i plug it in to my computer

It's not a "fix," actually. If that is a 4th gen iPod connected using USB, you need to do what it says and plug it in to the white square power adapter that originally came with those models. Later Apple power adapters should work; third-party adapters may or may not work. It has something to do with voltage. The USB connection to computer does not provide the required voltage (although it's obviously fine for normal syncing and charging).
If that iPod is connected to a FireWire port, it apparently provides the required voltage, because that step does not come up during the Restore. That model was a transition between iPod connecting to FireWire and connecting to USB. Earlier models required FireWire. Later models only used USB.
If you don't have an adapter, and there is an Apple Store nearby, I guess you could take it to the store's Genius Bar. I'm sure they have a power adapter there, to complete the Restore. (Just don't let them re-do the Restore on a Mac, if you use a Windows PC. Different storage formatting.)

IDVD 4 now freezes the entire computer during burning

Hello,
iDVD 4 now freezes my entire computer during burning somewhere around stage 3. I can't even force quit. This never happened before - it does so while burning a project that had been burned successfully many times in the past and also new projects. I did have a bad RAM problem weeks ago - which is fixed now. Tried fixing permissions and cleared out enough free space. This is wierd - it has been working for years.
Thanks very much,
NIck M.

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named:
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort: from Craig: Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
Yours Bengt W

My ipod freeze every time i plug in the computer i need help plz

my ipod freeze every time i plug on my computer i dont know how to reset and delete all songs plz help u.u

Does your iTunes see your nano?
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod: Appears in Windows but not in iTunes
If so, then follow through this:
How to reset iPod
Restoring iPod to factory settings
If not, do one or more of the following
Restart your computer
Uninstall & Reinstall iTunes [Windows XP] [Windows Vista & 7]
Reset iPod (will NOT delete everything)
Go to My Computer (Windows XP) or Computer (Windows Vista & 7) and see if it shows
Restore iPod (WILL delete everything)
Make sure iTunes and iOS firmware is up to date.
Hope all this helps.
Message was edited by: keeferaf

Why did my phone freeze up during update

why did my IPhone freeze up during current update?

I have the same problem. I plugged in my iPhone, started the iOS 6.1 udpate. 30 minutes later, my iPhone4 is frozen in the "loading" screen with Apple logo and progress bar - only the progress bar isn't moving and I can't reset the iPhone.
Help appreciated. My iPhone is just a brick with a progress bar, currently...
I can not power the iPhone down, and a hard reset simply brings me back to the progress bar screen on the phone. I can not restore from backup through iTunes because the phone is locked.

Why is my pc freezing up when I plug in my ipod

why is my pc freezing up when I plug in my ipod

Hi richardcruse,
I am not totally clear on whether your whole Windows computer is freezing up or just the iTunes application when you connect your iPod. If it is the latter, I would suggest using the steps in the following article to troubleshoot -
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
Thanks for using Apple Support Communities.
Best,
Brett L

How do I change from sync to iTunes to sync with iCloud if I don't have my computer available to plug into itubes

How do I change from sync to iTunes to sync with iCloud if I don't have my computer available to plug into itubes

Hello Rsd841979,
Thanks for using Apple Support Communities.
It's not very clear to me what you're trying to accomplish with iCloud, but if you want to start backing up to iCloud, then you can follow the directions in the article below. If this is not what you are trying to do, then please let me know what you're wanting to use iCloud with.
iCloud: Back up your iOS device to iCloud
Take care,
Alex H.

I ipod touch is not showing up on my computer when I plug in to update and download audiobooks.

I ipod touch is not showing up on my computer when I plug in to update and download audiobooks.

Hey khdewey,
Thanks for the question. I understand you are experiencing issues with your iPod touch being recognized in iTunes on your Mac. The following resource may provide a solution:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Note: This article is for Mac OS X users. If you're using a Windows PC, please refer to these troubleshooting suggestions.
Follow these steps to resolve your issue:
1. Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
2. Install software updates on your Mac.
Note: If an iTunes update is available, apply the update.
3. Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
4. Disconnect other USB devices and connect your device directly to a USB port on your Mac.
5. Restart your Mac.
Additional Information
In rare circumstances, your device may be recognized after reinstalling iTunes, but after you restart your Mac, the device may not be recognized again. If this happens and you're using Mac OS X v10.6 Snow Leopard, please follow these steps.
Thanks,
Matt M.

My iphone5 no longer shows up as a device on my computer when I plug it in to a USB port on my laptop. It does not appear in iTunes as connected, either.

My iphone5 no longer shows up as a device on my computer when I plug it in to a USB port on my laptop. It does not appear in iTunes as connected, either. It does show that it is connected and charging on the phone itself. This is a new problem. It used to work just fine.

Hi Why do you need to use a PC since iOS 7 you can download updates Apps everything Over wifi I have iPhone 5 s & 2 ipads in over a year I have never connected them to My Apple pc Try a wifi update If you have problems Try a Reboot press & hold power button & menu button hold both Down until You see Apple Logo you will not last any data. Cheers Brian

Question: Inadvertently a visiting toddler gained access to my computer during a visit. He's obviously fiddled with something as I can no longer use my arrow keys to navigate through my albums or events on iPhoto. Please help!

Question: Inadvertently a visiting toddler gained access to my computer during a visit. He's obviously fiddled with something as I can no longer use my arrow keys to navigate through my albums or events on iPhoto. Only one pic shows up in the album view - I can't see any thumbnails. To see the other pics I have to use the scroll bar on the right hand side of the window. Please help!

Depeding on your version of iPhoto: On the left (iPhoto 11) or right (earlier versions) of the lower frame of the iPhoto Window you'll see a slider. Drag it left.
Regards
TD

[Solved] 'New' error messages during init after updating initscripts

After updating to the latest initscripts, I got some error messages during init that I hadn't seen before. They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled. The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
In any case, I downgraded and found that the errors were nothing new. I'm just curious if the appearance of the errors during init was by design or a happy accident.
Last edited by alphaniner (2011-08-01 17:07:30)

alphaniner wrote:
karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
http://projects.archlinux.org/initscrip … 328fbaf2e7
http://projects.archlinux.org/initscrip … 42dfeca8c2
I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
You need to reboot.
After you do, run
tail /var/log/boot
Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
[karol@black ~]$ tail /var/log/boot
Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

0FI_AR_4 datasource is extraction 0 records during Init

Hi,
0FI_AR_4 datasource is extraction 0 records during Init. But if I run the Full-load I can get the data.
I am not sure whether our extractors are uncoupled.
Currently we are using GL and AP extractors as well.
We are on EEC6 and PI_BASIS 2005_1_700
There were no selection fields defined 0FI_AR_4 to restrict the Init on Fiscal year period/ Company code.
Not sure whether this note 551044 is applicable for the currect vesion of the component.
Reagards
Ajay
Points will be assigned to all answers.

Hi Anil,
Thanks this is useful I have checked TPS31 Table the entry is maintained as described in your link.
this table doesn't have any entries in it BWOM_SETTINGS ( Do we have entries only after running delta infopackage?
When I tey to instral the datasource from RSA5
The get the following error message.
Units field HWAE2 for field H2STE of DataSource 0FI_AR_4 is hidden
Units field HWAE3 for field H3STE of DataSource 0FI_AR_4 is hidden
Units field HWAE2 for field ZLOCAL2 of DataSource 0FI_AR_4 is hidden
Units field HWAE3 for field ZLOCAL3 of DataSource 0FI_AR_4 is hidden
it will be great if you can help me out.
Regards
Ajay

HT3965 I plugged my husband's iphone into our computer after I plugged mine in and it replaced all his contacts and data with mine, how do we reverse this change?

I plugged my husband's iphone 4 into our computer after I plugged mine in and it swapped all of his data/contacts out for mine, how do we fix this?

How to use multiple iDevices with one computer

Freezes computer during inital plug in

Similar Messages

Maybe you are looking for