Freezes on startup screen with new Battery

laptop works fine with old Battery just battery will no longer hold a charge installed a new Battery freezes on startup screen ran battery test ok got a 2nd new Battery using the numbers off the old one same thing followed hp noteboook pcs testing and calibrating the battery everytime the first part says battery ok the 2nd part says na. reinstall old battery laptop works fine

Thank you for visiting the HP Support Forums and Welcome. I have read about your Compaq-Presario and having an issue with the New battery. Here is a link to test and calibrate the battery.
Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.
If that does not help try the Microsoft ACPI-Compliant Control Method Battery is basically the driver that communicates between the computer and the battery. There is a chance that it is corrupted. It is reading the battery level wrong, so the computer thinks the battery level is higher then what is actually is, so when it runs out of juice it shuts down.
Step 1. Go to Device Manager
Step 2. Select Batteries
Step 3. Right click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there
Step 4. Click Uninstall
Step 5. At the prompt put a check in the box to remove the current driver
Step 6. Shutdown the computer
Step 7: Remove the battery for minute and then put it back in
When the computer comes back up it should automatically find the driver.
Step 8. Go to Device Manager
Step 9. Select Batteries
Step 10. Right click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there
Step 11. Click "Search automatically for updated driver software"
Do the same thing with Microsoft ACPI-Compliant Embedded Controller.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Any solution to a white screen with a battery icon with a lightning bolt through it on the Tour?

My daughters blackberry tour suddenly stopped taking a charge and would not power on. It just shows a white screen, with a battery shaped icon & lightning bolt through it. Went to our local cell store and they did a battery swap for us. The phone worked for about 2 hours then did the same thing. After a couple more swaps with no change, they un installed and re-installed the software. This again fixed it temporarily. When it quit again, we were sent a replacement phone. The replacement did the same thing. We were sent a 2nd replacement, but in the meantime, the first replacement started working. It worked for about a week then did the same thing. Now we have attempted to activate the 2nd replacement and it gets the same screen and will not charge enough to even activate it. I'm working with the customer support (phone is under warranty still), but so far no solution. Anyone else experience this? I find it strange that we now have a 3rd phone, doing the same thing and we have tried new batteries and an new charger.

Here are some good charging tips, please read and you'll see that many of them will apply to you.
http://www.blackberryfaq.com/index.php/Maximum_Battery_Life
And here: http://supportforums.blackberry.com/t5/BlackBerry-Community-Post/Power-Saving-Tips-for-your-BlackBer...
Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
Read this article also: http://www.blackberry.com/btsc/dynamickc.do?externalId=KB18223&sliceID=1&command=show&forward=nonthr...
Download Desktop Manager from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

MacBook Pro won't get off startup screen with apple logo. Help?

Could someone please tell me how I can get my macbook to get off that stupid startup screen with the apple logo? It won't go past that screen and boot properly. I have tried reinstalling OS X didn't work. I tried running a disk utility test and no errors where found. I don't have the time machine thingy so I couldn't try that. Is there anything else I can do before taking it to Apple and l
paying hundreds of dollars???
thanks in advance!!!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I installed Lion OS, after restart it gives the startup screen with my user id but no window for password entry, no matter what I do I can't get past the opening screen.

I installed Lion OS, after restart it gives the startup screen with my user id but no window for password entry, no matter what I do I can't get past the opening screen.

MacBook Pro
MacBook Pro Apple Support
Apple Support Lion
Lion Mac OS X Communities

Stuck on Startup screen with 10.5.2

I've tried to install the 10.5.2 update on a G5 iMac ppc, but get stuck on the white startup screen with the apple logo. I've tried re-installing (archive and install) successfully, then applied the 10.5.2 combi update, with the same result. Am I stuck with 10.5.1?

I was able to get past the Apple logo startup screen lockup by repairing my directory with DiskWarrior.

Refurbished iPod touch 3rd gen won't start. Just got it today to replace my broken one. It freezes at the screen with the apple logo, then flashes off and tries to restart again. Help,

Refurbished iPod touch 3rd gen won't start. Just got it today to replace my broken one. It freezes at the screen with the apple logo, then flashes off and tries to restart again. Help!

I have tried holding the power home button but all that does is turn it off. When I try to start it again it goes into the same loop.

Macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger display states "not charging" while attached to charger

macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger, display states "not charging" while attached to charger

rgregoryadams wrote:
macbook 13.3 with new battery and new magsafe adaptor will not charge above 80% no indicator light on charger, display states "not charging" while attached to charger
You'll want to reset your SMC (System Management Controller). Instructions are simple:
http://support.apple.com/kb/ht3964

MacBook Pro frozen on startup screen with progress bar and then it turns off

Hello, I have a MacBook Pro 15" of early 2012 with a i5 Intel, 4GB of RAM and a 500 GB HD.
I was installing the new suit of Adobe, when suddenly my Mac got frozen, vertical coloured lines appeared and the image on screen went distorted. I had to reboot the Mac by holding the power button until the screen turned off and when I turned it on, the lines appeared again and it itself automatically rebooted. Then the screen (now with no vertical lines) got frozen on the startup grey screen with the apple logo and the spinning wheel for hours with no response.
I tried to follow the steps of the official mac forums like verifying the HD with CMD+R and then Disk Utility, it says everything's fine; the same happens with CMD+S, no errors. I reinstalled Mavericks with the same CMD+R. I already reset the PRAM, SMC and performed a Safe Boot staring up in Single user mode and Verbose Mode and nothing, the same startup screen. I made too thins thing of holding shift until the progress bar appeared. Three days later (Today) I repeated the steps again and finally the verbose mode. Now, when I turn it on, the startup screen appears again (Apple Log and spinning wheel) with a progress bar. When it completes, the Mac turn itself off.
if you can help me, please. I don't know what else to do. The last thing is technical service.

Hi again ggt15,
You can find some more information about the Recovery Partition of your hard drive here:
OS X: About OS X Recovery
http://support.apple.com/kb/HT4718
It sounds like you might be trying to reinstall your copy of the operating system. If that's the case, you may also find some helpful information here:
OS X Lion: Reinstall Mac OS X
http://support.apple.com/kb/PH3878
Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://expresslane.apple.com/GetproductgroupList.action.
Cheers,
Braden

Satellite L750 - Win7 freeze on startup screen frequently

Hi, my L750 has been having this freeze on startup issue frequently in the pass few days (almost 2 out of 3 times), it just stopped loading just before the windows logo would show up. at first it would continue running after I moved the mouse or hit a key, but today these tricks wouldn't work.
I have to press the power button to force restart it, and it show a window repair option, which I chosen, then it freeze after the process bar disappear (hence, blank screen and nothing, no harddisk or processor light), force restart again and it boot up ok this time.
Any idea what could be the issue here?

finally have a chance to restart my laptop..
so I ran a checkdisk which claimed I have 2 bad file and 60 reprase file (which I have no idea what that is), and I also put the battery pack back (have to remove it so it wont be too hot when I'm rendering graphic etc.). *and the laptop seems start up ok for the last few times..*

Two startup quirks with new Mac Pro

Just upgraded from an aging Power Mac G5 to a Mac Pro (with new 24" Cinema Display replacing my old ADC Cinema Display).
So far so good overall. But two odd startup quirks have popped up.
First, with my old setup, when I restarted the Mac, the startup chimes would sound through my external speakers. Now, the sound (barely audible) comes from the Mac Pro itself. Not a big problem. But I'd rather hear the sound through the speakers. I am wondering if there is any way to get the Pro to do this.
Second, I have a second display (connected via the DVI port). When I turn on the Mac, the DVI display comes up first and shows the startup gray and blue screens. The Cinema Display (even though it is the monitor with the menubar) does not come on until the Desktop background appears. With my old Power Mac G5 setup, the Cinema Display came on immediately and showed the startup screens. Again, not a big deal. But I am wondering why the shift and if it can be shifted back.
As I write this, it occurs to me that these two matters may have essentially the same cause (e.g., components not coming on as soon as expected). Just a thought.

Hi mfiman,
I can only answer your first question, since I don't have a two-display setup.
With the introduction of the very first Mac Pro in 2006 Apple seems to have changed the behaviour of the startup chime to only come from the internal speaker.
To my knowledge this can not be changed (have it too !).
Regards
Stefan

My Mac Mini won't get past the initial startup screen with the Apple logo. What can I do?

After a long distance move, my Mac Mini won't startup past the logo screen. What can I do?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
     a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Stuck at grey startup screen with spinning grey wheel

Software update wanted to install a new version of airport. Clicked ok and appeared to install. Restart then yielded grey startup screen and spinning wheel and it stays stuck there. Original MacBook Pro with 2Ghz Core Duo. Any ideas?

Hi, I have an i Mac but was having the same problem last week - getting stuck at the start up screen. I had no idea what to do but started a discussion and someone suggested the repair utility and it also told me everything was fine. Then she told me to do an Archive and Install and in the end that got everything working again. I don't know much about computers so I don't know if this will work for you, too, but it might be worth a shot. Here's the link to the discussion if you want to read everythign she told me: http://discussions.apple.com/thread.jspa?threadID=1457827&tstart=0

G4 Dual 800 Freezes At Desktop Screen With Cursor In Top Left Corner...

At OSX 10.4 startup my screen freezes as mentioned above. The clock is still accurately working and the usual startup sound occurs but the grey screen with logo takes longer than usual to reach the blue screen with icons and screentop info.
Problem occurred whilst selecting Safari icon to go on line. Until then the cursor had freely moved. The light on a wireless mouse shows power from the batteries and I know they're OK but the light on the signal source plugged into the screen rear USB point does not now light up (green - it's a Microsoft one).
I've got three different mouses and each indicates a lack of power to the system at that point. However, until the static cursor is reached on the desktop everything else seems to be working.
I've been through the usual keyboard steps in an effort to solve the problem and I've followed the previous comments earlier on in the year but my circumstances don't appear to be exactly the same....
Any A to B advice would be appreciated - thanks.

Thanks for that Tom.
Should have said.....When I first succeeded in gaining Safe Mode (after a number of attempts) I found that moving the cursor to the Dock, to the first icon it came across, the Finder one, it immediately froze the screen again, the same as when I selected Safari in the Dock first of all.
I'm still in the process of trying to get the Safe Mode to come up again but haven't yet succeeded with the required precision in selecting after the startup sound (well, I think that's what I'm about!). I'll call back again on progress shortly. If I manage it I'll try selecting the Tray operation.

Pink vertical lines on my screen &freezes on startup screen

24" iMac 8,1 early 2008
Factory: W8 Shanghai China
Recently my computer froze and I had to power off & power back on manually. When I powered back on I had a bunch of wavy pink lines all over the apple startup screen and would freeze after 30 seconds of the gear spinning. Searching on the Internet I read to try and reset the nvram by holding down Command Option P & R. Once I reset the nvram my computer rebooted and the pink wavy lines were gone they are now pink vertical bars and still freezes. I have the original boot disk that came with my computer and tried running Apple Hardware Test, results came back: "No trouble found". Not sure what else to do, I have read all over the Internet it could be a million different things it could be my RAM, it could be my logic board, or hard drive, or LCD screen not sure how to rule any of these out. I also read there could be a defect with these computers made from factory W8 in Shanghai China and Apple will repair free of charge. Does anyone else know anything about this? Please help!! Thanks

Run Apple Hardware Test in EXTENDED MODE at least 3 times back to back. If you ran the basic test that is useless. I doubt a 5 year old machine is covered by any type of warranty however you can always check to see if there is an active recall. If there is and it's still active then take it to your local Apple Store or AASP for repair. If it's not covered as I suspect then you will have to have to pay for the repairs.
http://www.apple.com/support/exchange_repair/

HT4061 My iPhone 5 will not turn on. I turned it off in the morning and when i went to turn it back on in the afternoon if wouldn't turn on. I plugged it in and it began flashing the startup screen with the apple logo on it. I tried to restore it but it c

My iphone wil not turn on. It wil only flash the start-up screen. I tried to restore it using itunes, but it said it was unable to restore.

Hello there, kmfoster1.
The following Knowledge Base article offers up some great steps for troubleshooting your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
If the issue persists, and you are unable to restore your phone, this article provides
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Freezes on startup screen with new Battery

Similar Messages

Maybe you are looking for