Freezing a title roll?

I've been getting some pretty good advice on the forum here. Here's another question:
I would like to freeze the very last line of a title roll in the center of the screen for a few seconds before fading it out. I can get the roll done okay, and the fade no problem, but I can't figure out how to freeze the last line at screen center (while the rest of the roll moves up off the screen).
Any ideas?

how to freeze the last line at screen center (while the rest of the roll moves up off the screen)
Do you want the text to split? Last line stay put and the rest goes up.
That is going to take two titles.
If you just want it to freeze and fade:
Give a couple of enters to the text in the roll/crawl options so the last line is in the middle.
Then set the postroll to a value (frames) that will last the freeze and the fade out.

Similar Messages

  • Boris Title roll problem!!!!

    Ja have the 1080i 50 8 bit sequence. I try to put the boris title roll on the timeline. Rolling title looks like the interlace problem. I've tried the video filters such as de interlace, shift fields, flicker filter.I;ve changed the sequence setting many times trying set the field dominace but ...No effect.... Strange for me that rolling title looks better on the video client monitor, but only using composite analog output. On the HD SDI output problem still exist. I have that problem foe a long time... It's frustrating .... Please help...

    I.ve checked that exactly the same problem I have using motion to create title roll sequence. Putted on the timeline seemes to field dominance problem....

  • Title roll and logo

    Hello,
    I want to use title 3d from boris to do roll but it don't seem to work ???
    So I used title roll from fcp but there is no way to insert logo or images between lines.
    I need to insert that in the roll because is supplier that paid the show.
    thanks

    The easist way would be to do it in Photoshop. Create the text and add the logo where needed.
    To do it with Title 3D or other rolling text generator you'd need to leave enough blank space where you want the logo to appear. Next, lay the logo on a track above the text at the appropriate place and key frame it's movement to match that of the text.
    -DH

  • Changing speed off the Title roll

    Can anybody explain me how to change the "rolling speed" off the Title roll in Imovie 9 ?
    I introduced a lot off names in the roll, but it is rolling too fast over the screen.

    You should see a bar over the video clips that represents the title. Drag the right handle of this bar to the right to make the title longer and slower.

  • Why would my title roll be jerky when I haven't changed any settings?

    I have just added a title roll(crawl left) with the default settings but find it is very jerky along the bottom of the screen.Any idea why this would be?
    Many Thanks

    Dougie,
    Have you done a Render of this new Title yet? If not, set the WAB (Work Area Bar) over the Duration of the Title, hit Enter, wait a moment and then play. Should be smooth. If not, something else is amiss.
    Hunt

  • Am trying to reinstall photoshop elements/premiere elements 9 back on my pc but when it gets to installing shared technologies it freezes and then rolls back.

    I don't know what is going on with this. Photoshop worked but the premiere elements suddenly kept freezing so I un installed and am trying to reinstall but keep having the same issue. This is from a purchased dvd set. At one point when it got to this phase, the dvd started making an odd noise then roll back. I try again and again with no odd noise but still the same issue. It's not the pc I've had that remotely checked and other stuff installs. What gives? I NEED this fixed pronto

    glenda178
    What computer operating system is your Premiere Elements 9.0/9.0.1 running on? For now, for the details below, I will assume Windows 7, 8, or 8.1 64 bit.
    You are experiencing the known Shared Technology installation error syndrome which can hit any version of Premiere Elements on any computer operating system. There is no one fix. Lots of home remedies.
    The fix that has worked for me consistently lately is this:
    Local Disc C
    Program Files (x86)
    Common Files
    Adobe
    and in the Adobe Folder is the OOBE Folder. Rename the OOBE Folder from OOBE to OLDOOBE. Close out of there and try for the Premiere Elements 9 installation again. (Do not forget to do the Premiere Elements 9.0.1 Update after you have finished the Premiere Elements 9 installation.)
    The following is a sampling of what some others have gone through with this particular error
    Re: Premiere Elements 11 "installing Shared Technologies" error during install
    Please let us know the outcome. We will think about this some more depending on your results.
    Thank you.
    ATR

  • Help with title roll problem

    Hello, i am pretty new to premiere, basicly i
    want some text over the top of my video whilst it plays, however when i place some text near the bottom of the screen ( doesnt even have to be that close) it adds a checkedred gride above and below, when i play the video it causes the text to scroll up, how do i get it to stop doing this, heres an image, not sure what other details i need to give so just let me know, thanks guys
    heres a pic  -  http://i1082.photobucket.com/albums/j370/tomdelongste/test.png

    How did you create the title? I suspect that Jim is right---that you mistakenly created a rolling title, as described here.
    Information on creating titles is here.

  • How to make LCD screen look, why are my titles rolling the wrong way, How to add walking fog to menu

    Hi, I've been using PP for a while, just started using CS3 a few months ago. A few quick questions:
    1) My titles have somehow started rolling down instead of up, how do i change that? in otherwords the bottom of the credits show before the first part
    2) I wanted to give an effect of an LCD look, is that possible? By that I mean like instead of filming a website from my monitor, what can give it tha tlook like an LCD grid or something.
    3) I am thinking of creating a menu and wanted to add like a rolling fog on the top layer of a menu. I've never created a menu in Premiere, is that possible?

    Edgar, please provide
    these details to help us help you.
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Freeze column titles

    How do you get titles at the top of columns to float or freeze so that when you are well down the rows you can still see the titles

    Place the titles/column headers in a Header Row.
    Go to the Table menu. Choose Freeze Header Rows.
    Regards,
    Barry

  • FCP X freezes on title background rendering?

    Turned rendering off to animate title. every time I turn on background render FCPX will stop responding.
    Working on a new iMac i5 with 8 gigs memory. it should be flowing. what's the deal?
    Will re-organizing my Font library or removing fonts help? (some fonts can be troublesome)
    Suggestions anyone?
    Please no crybaby remarks about the new FCPX. we've heard them all. get over it.

    I think it's safe to say that FCPX wasn't tested throroughly for use on anything.
    with that out of the way, there are many variables as to what might cause your problems, but I don't think it's the mac mini as long as it meets the specified minimum requirements (especially the graphics card).
    You might try creating a camera archive first and then importing from that.
    The other issue might be the file format itself; you might need to use Clipwrap first. Maybe someone who has the same camera can chime in.

  • Flash videos on facebook freeze when mouse rolls over

    When I move my mouse pointer onto a flash video on facebook, the video freeze. The audio does not. Mostly noticed with youtube videos posted on facebook. No other sites showing this problem.

    I just tested this on an existing install of FF 35 on another computer (a headless win 7 x32), one that has been working just fine. I RDP'd to it from both this new computer and a 3rd computer (also Win 7 x64 but does not have FF installed). When I RDP'd to the headless unit via the 3rd computer, FF 35 played FB videos just fine (though I did get the weird play button thing). But when I RDP's to the headless unit from this new computer, FF 35 will not play FB videos. So it must be something here on this computer that is messing things up.

  • Roll title / end title

    Hi out there,
    I have a problem with my end title (roll title)
    For a smoother flow, I rose the blur and changed the frame number. But it's not rolling smooth... What can I do?
    Thanks for answering me!

    Afraid I'm not familiar with what's available in non-English tutorials.
    As Christina suggested, it's possible the issue is related to a mis-match in settings. In FCP, you can verify sequence settings by hitting Command 0. In Motion, the project settings are available in the Edit tab's listing; there is a variety of XDCAM PAL settings to choose from. It's also where you can set the project's duration.
    If you simply add the scroll behavior, the credits will start off-screen, with the first line of text appearing after a half second and the last line exiting at the top a half second before end of the timeline. If you want to adjust the timing, use the de-flicker filter, etc., select the scroll behavior in the project pane and the HUD controls should appear; if it does not, hit HUD in the toolbar.
    Good luck.
    Russ   

  • Pictures not being saved to camera roll (or anywhere)

    Hi all,
    I was recently having some issues with sending/receiving data over 3G on my iP4. To try & resolve this, I did a clean restore of my phone. Since then, I have been unable to save any images from the camera (or email, mms etc) to my phone.
    Initially after the restore, I synced my old pictures across to create a photo library. When taking new pictures they would not save to the camera roll, but a small image was shown at the bottom-left of the camera screen (but again, when clicking on this it would tell me there were no pics).
    Also, the video function is now no longer working at all. It will open the video option, allow me to press the record button, but doesn't actually begin to records & greys out/freezes the camera roll icon, record/stop button & camera/video toggle button.
    I have tried restarts etc, but nothing has seemed to work so far. I'm DESPERATE to resolve this by Friday as I'm going to see my newborn son for the first time & this is my only 'camera'.
    ANY help/advice is MUCH appreciated!!!
    Steve

    Well here is one option: make a new backup, then in itunes select Restore all over again which will install clean os. Once thats done, you can just activate phone with new temporary name & launch Camera app to see if its all fine & dandy. If it is then you can do a Restore from Backup: right click on phone in itunes & select 'Restore from Backup.'
    Do any images show up in like iPhoto or Image Capture or Aperture desktop apps? The images might be there, just not showing up or something. With everyone downloading update it might take longer than usual, might want to wait for a less busy time to reinstall os? Just a thought.

  • Titles created in Boris title crawl disappear after render

    I build a title roll in Boris Title Crawl for a weekly TV show that I edit in HDV 1080i60 (that is how I get the footage) that airs on Dish Network and DirecTV. I build the end credits in Boris Title Crawl using the "Roll" animation style. The roll will appear in the perfect position on the screen. However, sometimes over time and subsequent rendering, the titles will disappear completely from the screen, and I believe they are being positioned far off to the side outside of the viewable area. The wireframe for the roll remains in the correct position, it just appears empty. If I re-open Boris Title Crawl and then click "apply" again, the mispositioning is corrected, at least for a while. If I try to export using quicktime conversion to another format (Quicktime Movie with H.264 compression), the roll might disappear again, and the movie will export without the roll. This has only been happening since upgrading to FCP 7, I don't recall it every happening with FCP 6. Any ideas would be greatly appreciated.

    I don't use Boris regularly, but when I have, I never encountered this, and I doubt it's related to upgrading to 7. If I understand correctly what you're describing, the changes could be caused by any number of things – like whatever cutting took place on your TL "over time and subsequent rendering" causing re-renders.
    How many v tracks do you have and is the crawl on a separate track? Consider exporting the credits clip as a QT movie and reimport it. 
    And somewhat off topic, typically I get better (and far more predictable) results by exporting my sequence as a QTMovie (current settings) and do all encoding (e.g., H.264) in Compressor.
    Good luck.
    Russ

  • Roll Name in the Source Window

    Is there a way to automatically show all of my roll names in the source window? I would like to be able to just click on a roll name in the source window and be able to see those particular photos in the main iPhoto window.

    Welcome to the Apple Discussions.
    No, Rolls don't get listed in the Source Pane.
    However, there is a way to view just the roll you want. Choose Library from the Source Pane and View > Film Rolls. (The entire library must be selected, with no filter in operation. Be sure all Year Smart Albums are selected - look below Library in the Source Pane. Click the little triangle to reveal or hide them.) Each roll has a disclosure triangle next to its title. Click it to open or close the roll. Option-click one triangle to open or close all rolls in your library. With all rolls closed, it is easy to scroll through the roll list, open one roll, and see just the photos in that roll.
    To make it easier, I title all of my film rolls. Click the little i in the lower left corner to open the Info Pane. When you select a roll's header in the main window you can edit its title, roll date, and comments by typing directly in the Info Pane. Comments are especially handy; they display only when the roll is closed. I use comments to list the contents of a roll, so that I know which roll to open when I want to find a particular photo.
    If you still want your rolls in the Source Pane, you can drag the roll's header there and an Album will be created with the same name and photos. To create Albums that automatically update when you change the photos in the rolls, you would have to create a Smart Album for each roll with the category "Roll contains (type the roll name)". That seems too cumbersome, in my opinion.
    Regards.

Maybe you are looking for