Freezing after 20 min of use.

I use this Macbook Pro 2011 daily with 10.8.2 and with no real changes to speak of (ie installing software) i've started experiencing freezes after about 30 min of use.
Programs start becoming unresponsive
Beachball appears.
System freezes until restart.
No crash log as it doesn't actually crash just freezes.
I checked the log and saw that a geek tool couldn't find a file so i shut that down and restarted in case it was the cause. It happened again though and i copied this as the last few messages before i had to restart.
if anyone can shed light on what's suddenly causing this it would be greatly appreciated.
2012-12-10 1:41:26.436 PM com.apple.usbmuxd[91]: _handle_timer heartbeat detected detach for device 0x11-10.0.1.18:0!
2012-12-10 1:42:49.052 PM mdworker[641]: Unable to talk to lsboxd
2012-12-10 1:42:49.061 PM mdworker[642]: Unable to talk to lsboxd
2012-12-10 1:42:49.136 PM sandboxd[643]: ([641]) mdworker(641) deny mach-lookup com.apple.ls.boxd
2012-12-10 1:42:49.146 PM sandboxd[643]: ([642]) mdworker(642) deny mach-lookup com.apple.ls.boxd
2012-12-10 1:42:49.000 PM kernel[0]: Sandbox: sandboxd(643) deny mach-lookup com.apple.coresymbolicationd
2012-12-10 1:43:46.850 PM com.apple.usbmuxd[91]: _handle_timer heartbeat detected detach for device 0x12-10.0.1.18:0!

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Similar Messages

T400 downgraded from Vista to XP resulting in system freeze after 10 min activity

Hi,
I just purchased a T400 and have gone through the process of (re)grading the OS from Vista Business to XP. From the moment the setup dialogue for XP started (machine name, date, users etc), the whole systems freezes after working the machine for around 10-15 min. First, I suspected it to be a mouse freeze, but I get no reponse from neither the keyboard nor mouse (not sure if it is a complete system freeze or to do with mouse/keyboard drivers). Even the clock in the bottom right corner stops running.
To get the system going I need to force the system to reboot using the power on/off button.
The XP restore disc I used came from Lenovo with the computer, and I have followed the instructions by point. Do any of you recognize this problem? And more importantly, know how to deal with it
Message Edited by Missmostly on 10-16-2008 06:28 AM
Message Edited by Missmostly on 10-16-2008 08:56 AM

Hi,
I posted a message on the forum 5 days ago, and got no replies. I agree the problem description might be a bit vague, so here we go again:
I recently purchased a T400 (model 2765, 21g) with the XP downgrade option (the MS Windows XP Conversion Kit containing 2 CD's: Lenovo's Rescue & Recovery plate + XP product recovery plate with SP2). During the installation of XP (the end part where you set up your user) the computer freezes (no response from keyboard). I power the machine off and on again, and the installation continues as it were. I finish the installation and the computer is set. After additional 10 min the computer freezes again in the same style.
I imagine it to be a powermanagement disagreement between MS system and Lenovos powermanagement system, and set every parameter to be always ON and full performance ( I am running on AC). This time the freeze doesn't happen for an hour. I then begin to reinstall the powermanagement drivers and the general drivers for this particular model running XP (from Lenovos drivers Matrix), and now I am looking at two hour before each freeze. That is if I don't plug in any external hard drives (then the system can crash within 15 min or an hour), and we turn a blind eye to the occational freeze after 10 min on the first boot of the day .
At some point I suspected there to be a conflict with the existing SATA drivers that I also have reinstalled for the occation. Still the system is NOT stable.
And the frustrating thing is that I have no clue why. The sympthom is always the same, complete screen freeze ( I do not know if the system is active behind (no hard drive running)), that can only be cured with a forced boot.
If any of you reconize this, please assist me to a solution. I have by now installed all programs to my liking including all MS updates (SP3 etc), and hope there is a way to get to the core without a complete reinstall (or worse, return to the realm of Vista)

My imac freezes after 5 minutes of use

my imac freezes after 5 minutes of use, that's including after i reboot. is there something that i'm not doning because it's freezing on all my programs.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Photoshop CS5.5 freezes after 10 seconds of use every time

Hey everyone,
So weve been going nuts over this! Essentially I work for a big company, and we all have company laptops that we use to work on, which all have essentially the same programs installed on them. I have a Dell Latitude E6530, its running Windows 7, has a Corei7 vPro inside. Im running Adobe Production Premium CS5.5, and all the programs work perfectly fine (like I use Flash and Illustrator as well with no issues.) except for Photoshop.
When I boot up Photoshop (either version, 32 or 64), Ill be able to use it for about 10 seconds and then it will freeze. It will stay frozen until I actually go in and Task Manager the program off. It does not crash. This literally works with anything I do in Photoshop, I could literally have nothing open and go to the Preferences menu, and it will freeze there. I have tried looking up this problem online and I havent seen it as specified as this, I have seen it where people do something specific, like go to save, and it freezes AND crashes. Mine just freezes after ANYTHING I do after 10 seconds of use.
More about my set up. I have 3 monitors linked to my laptop. I initially thought maybe cutting it down to 2 or 1 might help, because it seemed to yesterday for a moment, but today I tried it and I had the same issue. I also have Symantic Encryption on my laptop, but so does everyone else and they can all run Photoshop completely fine. Weve updated the drivers and updated Photoshop and everything to the latest versions.
Does anyone know if Im just doing something very simple wrong that Im overlooking? I have seriously never had an issue this bad with Photoshop before. Let me know if you need any other information. Thanks for your help!

Yes, basically we have all the default fonts installed on our computers, but we use a program called Universal Type Client to get the fonts we need, and UTC grabs fonts from a server and temporarily makes them usable on our computer. But everyone has this software so I dont think that would have anything to do with it.
Could it possibly have something to do with my Video Drivers or Graphic Cards? Our tech guy mentioned it was strange that my computer had two different things (I believe he said I have a CORE i7 vPro and Nvidia NVS 5200M or something and that they may be competing?) or the amount of monitors Im using?

Qosmio F55 - Freezing after 20 min idle

Hi and sorry for my English,
When I use it, everything is ok, but after 20 min idle it's hanging, ctrl,alt del no respond, only way to switch off is power button.
I changed VGA driver, disable hard disk switch off, disable screen server, run RAM check, still the same problem.
Any idea what is the problem?

It is not easy to say why this happen. We can just speculate why this happen and your answer can be yes or no.
Maybe you should install Vista again using Toshiba recovery image. Test it with clean preinstalled OS.
I am pretty sure after doing this your notebook wills works well and you will not be faced with freezing issues.
What do you think about it?

G62 Freezes after 2 mins

HP G62
Windows 7 64 bit
G62 started freezing suddenly after having it a year. It consistently froze after 2mins of booting up several times. I log on to safe mode and went on the forum where i took the advice to do a "driver check" for errors. This fixed it temporally to the point that it does not freeze after 2mins, but it has frozen randomly twice in the last two days. What do you suggest?
I havent loaded anything new or done anything different to cause this problem.

In your situation first thing you could do would be to run a diagnostic test from F2 on the startup to make sure your hardware isn't having any issues. Since you can access safe mode it is a big chance that you have a driver or software malfunction. You can access msconfig in safe mode by going to the start menu typing in msconfig in the search field. When another box comes up select on startup tab and disable all. Attempt to reboot into normal windows. If you are able to one or more of your startup prgs are not allowing you to boot. My suggestion then would be a factory reset.
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Incoming Video freezes after a few minutes Using S...

I just installed the Sony BDP-S780 Blu-ray and Sony CMU-BR100 Webcam, skype is working, however the incoming video freezes after a few minutes. The caller on the other side clicks off the video and then back on, it works again but only for a few minutes. Is there a fix for this or am I doing something wrong.

I just installed the Sony BDP-S780 Blu-ray and Sony CMU-BR100 Webcam, skype is working, however the incoming video freezes after a few minutes. The caller on the other side clicks off the video and then back on, it works again but only for a few minutes. Is there a fix for this or am I doing something wrong.

Ios 8.0.2 sync after restore freezes after ipad mini restore

Its unbelievable the kind of buggy releases apple has started releasing off late! this is worse than microsoft!
i have an ipad mini 1st gen with ios 8.0.2, the UI was extremely laggy so i transferred my purchases, backed up and restored my ipad. now the app syncing never ends! it freezes on some or the other app each time i restart the sync. its getting on my nerve. i left it to sync all afternoon and this time it froze on pages (which was the 5th app being synced).
HELP!

Try the following:
Try logging out of your Apple ID:
Settings/iTunes & App Store/(tap your Apple ID)/tap Sign Out
Next, reset your device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
After the reset, sign back in to your Apple ID:
Settings/iTunes & App Store, then sign back in using your credentials
If it doesn't work (I've now heard a couple of replies saying that it does NOT), you'll have to wait for a fix by Apple since this is a system notification.
The other option (which should work) is to restore the device as new (not from a backup), and move your content (data, settings, music, apps, etc) back to the device manually. You'll need a backup your content. This is a pretty big & involved task so you may just want to ignore that badge on your Settings app.

Safari freezes after several hours of use on Macbook pro

I just bought a Macbook Pro. When using safari, it freezes at least once a day to a point I can't force quit, and had to do a hard shut down. I've figured out that if I am using my computer and safari for more than a couple of hours, Safari just freezes. An apple support representative did mention that laptops were not meant to be constantly on, so I have been shutting it down when not in use. Still, I shouldn't have to shut down after an hour just to keep Safari from freezing.
Does this sound normal? Is there an easy fix? Do I need to look at getting this computer replaced? Or should I download a better web browser?
I'm also new to Mac, and thought switching from a windows would mean better reliability. So far I have been unimpressed with my computer. I just want it to work without worrying about having to force it to shut down once a day. Thanks for your help!

Does this sound normal?
No, of course not.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Why does my mouse pointer keep freezing after I don't use it for just a few seconds? It seems like this started shorty after I installed 10.8.3

This is very very annoing and needs a software fix IMMEDIATELY APPLE!

I have this exact problem as well on my retina MBP 15" with 10.8.4. It's been going on at least since 10.8.3, but I'm unsure about anything before that since I bought this machine brand new in April. It's happened around 5 times during my ownership of it.
I read the solution you found (you mentioned this in another comment) about, but I had none of those LaunchServices/Daemons that people were talking about.
The freezing of the trackpad only seems to occur while using Safari, but it may be because I use Safari a lot that I'm drawn to that conclusion. Anyway, I haven't seen anything in Console.app about it.
Re: Trackpad is sometimes not working on MBP after OS X 10.8.2 upgrade
This guy also think it's Safari. I suspect it could even be a Safari extension.
I have these extensions installed, all activated:
* AdBlock 2.6.0
* ClickToPlugin 2.8.4
* 1Password 3.9.19
* DuckDuckGo 1.4.1
* Reddit Enhancement Suite 4.1.2
Of these, the DuckDuckGo extension was added last, and it's also my main suspect. It has an "Answer on right click" option in the settings. I don't know if it's possible that it could be interfering with the trackpad or its driver, but maybe.
If that's not it, I'm guessing corrupt caches or something like that.
OK now, this is what I've tried:
* Repair permissions
* Booting with Cmd+Opt+P+R
This is what I plan to try, individually:
* Run a tool like Maintenance to delete all caches and rebuild LaunchServices database.
* Disable Safari extensions individually for a week or two each.
* Switch to Firefox for a while.
* Remove .plist files relating to trackpad. I do not know which these are yet.

No Sound after 30 mins of using

Hello,
I have a problem, after using my laptop for 30 minutes the sound just stops working there is no sound not even basic sounds like when an update window pops up, can anyone tell me what to do, the laptop is completly new !

Welcome to the forum!
It could be a hardware problem or operating system problem. If it were me I would do a recovery and restore the system back to it's original condition. That would at least eliminate any possibility of an installed piece of software or quirk in the OS shutting down the audio. And since the laptop is new, if you call tech support, they will probably have you do a recovery as part of the trouble shooting process anyways. At least this way it is already done. Just be sure to back up any important files before doing the recovery since everything will be erased during the recovery process.
If a recovery didn't resolve the problem then it is very likely you have a hardware problem. Possibly after 30 minutes the system heats up sufficiently to cause an open circuit on the board. Since the system is new, call tech support for a replacement. Again, backup important files since you would be sending this laptop back in.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Finder High CPU Usage 108% after 5 mins of use

So this is my issue, something odd is happening, I am trying to see where all the work is happening or if it is a bug. No other software seams to hog any significant space, and I am using Photoshop.
I've done a sample of the process as I hope someone can understand it and tell me where the issue is?
Here is the inspect too
https://dl.dropboxusercontent.com/u/82899493/screenShots/Inspect.txt
I've tried disabling the creation of the .DS_store files that had no effect.
also turned of the icon preview in Finder > View > Options but still nothing,
All I can do is relaunch finder and carry on, which is not the best option.
Many Thanks
Matt

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

My internet freezes after 10 mins when i turn on xbox live

When i am playin xbox live for about 10 mins or more my internet freezes and so does my xbox live, when i try to load a page it says unable to load page

How is that related to Firefox support?

Freezes after few mins. + how to enable Turobo mode/Ultra-Turbo

hello,
here's my system spec :
MSI 875P NEO-FIS2R
Intel PIV 2.6 C Ghz FSB800 (Ht enabled)
2x256 MB DDR400
Maxtor 80 GB S-ATA 150
MSI Starforce FX 5900 Ultra 256 DDR
CD-RW 52x32x52
i have just OC'ed my CPU from 2.6 to 2.8 the default settings were : 203 x 13.0
i have OC'ed the FSB to 215, so now it's 215 x 13.0. i've also tried 231 x 13.0 to have 3.0 Ghz, but that didn't work, i disconnected everything, took out the battery for 15 mins., replaced it and booted again, and everything was normal again. (back at 2.6 Ghz). but i also noticed that i lost all my BIOS settings... . so i just changed everything that i still could remember and turned back to 215 fsb instead off the 231... . now here's the prob : my system runs just fine with the 2.8 Ghz(OC'ed), i have ran some heavy benchmarks and it's all fine and stable, but sometimes my system just freezes, doing nothign, only the fans keep spinning and my monitor just hangs, not black, but with the last image...my question is : does this happen beacuse i OC'ed it or have i forgot to change anything in the BIOS ?? so, is it BIOS-related or OC-related ?
second question : how do i enable the Turbo mode or Ultra-Turbo ?
greetz

Yes you have to first make sure that you take it nice and easy when you OC, Go up in small steps and stay there for a while, play a game run a benchmark, whatever....You just want to make sure that your PC remains stable and Most important runs COOL ......The one thing that you must change in your BIOS is the DRAM(VDIMM) voltage to 2.7 Volts...That will Most likely stop your Freez-ups....And in order to enable Turbo or Ultra-Turbo....It is on the Frequency and voltage Page at the Top.....These settings are going to tighten up your Memory Timings, so you should start with a Non-Overclocked FSB, And try to enable Fast, or Turbo.....You should do a search on these Subjects in the Forum, as there are Quite a Few......Just remember to go slow and not get greedy, or you might harm your System ...............Sean REILLY875

Ipad 2 temperature error after 10 min of use since updating to ios. 7.1.1

Just like the description says. Ever since I updated to 7.1.1 I get a temperature warning after just a few minutes of using ipad 2. Tried restoring through iTunes several times, no luck. Please help with any advice.

I would DEFINITELY NOT try that. The sensor may be faulty or it may be telling you you could fry your device if you continue to use it.
Take it in for diagnosis (free, repairs are not).
Barry

Freezing after 20 min of use.

Similar Messages

Maybe you are looking for