Freezing after importing media - Final Cut Pro 10.0.9

Whenever I import media, the import window closes and leaves the final cut screen darkened and frozen. I searched and saw someone had a similar issue when something plugged into their firewire port was interfering. Nothing is plugged in in my case. This is pretty annoying. If I restart the program the media I imported is there, but it's going to suck to have to QUIT the program every time I need to import media....
To be more specific it doesn't matter where it is or what kind of file. It could be a jpg from the desktop, doesn't matter. Just freezes..
Running OSX 10.6.8
Model Name:          iMac
Model Identifier:          iMac11,3
Processor Name:          Intel Core i3
Processor Speed:          3.2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per core):          256 KB
L3 Cache:          4 MB
Memory:          8 GB
Processor Interconnect Speed:          5.86 GT/s
Boot ROM Version:          IM112.0057.B00

Final cut screen is dark. The top menus (file, etc) are accessable but do nothing. All other apps run fine. When you click on FCPX in the dock, it shows that the media window is still open, but it isn't.

Similar Messages

Import from Final Cut Pro not working correctly

I have a very simple project in FCP. (Ver 6) It is a HD clip that is about 5 min long with 7 chapter markers.
I exported the project as an XML file and imported that into Premiere Pro empty project.
I wind up with two assets, a .mov with same name as the .mov in FCP and a sequence with the same named sequence in FCP.
Right clicking on the .mov and selecting "New sequence from clip" creates a new sequence with the .mov on the timeline.
There are no markers.
Right clicking on the sequence asset and selecting "New sequence from clip" creates another sequence with the same name and the .mov on the timeline.
The markers are inside the .mov and audio tracks, not up on the top ruler line where markers appear when manually adding markers.
The keystrokes to move to markers do not work.
The "Clear all Markers" function is greyed out , like it is when no markers exist.
If a "Dynamic link to Encore is performed, there is no markers in Encore.
If you enter chapter markers manually and look at the project file (an XML file) you will see indexes with the chapter points , durations and names as children named "Markers" with attribute"ObjectID='22'.under "//PremiereData"
Following , in sequential order, are subsequent objects "Markers", ObjectID='23" through "ObjectID=n
However, if you look at the project file after importing a FCP project, this same function occurs, except that it is "Markers" "ObjectID=30 with the indexes and marker data 31 through n (further down in the file). This area is empty when adding the markers manually in Premiere Pro.
FYI , the project file is littered with the word "Marker" and "Markers" throughout the file, only their attributes make any node unique.
I am at 99.9 &% finished with a VB program to create / modify nodes, values and attributes, except that the XML date changes format at the node named "//WorkspaceSettings" so I am not able to edit values to make a file that will not crash when opening.
I would very much like the import from Final Cut Pro to work, or someone explain how to work with the nodes under "//WorkspaceSettings"
Thank millions for a solution.

It's a 2007 iMac with 2.4 GHz Intel Core 2 Duo. I had been using Final Cut Pro without any problems right until I upgraded to Yosemite. I'm hoping that upgrading to Yosemite doesn't mean I can't continue using Final Cut Pro - that would be extremely frustrating.

Why wont my clips import into Final Cut Pro ?

Why wont my clips import into Final Cut Pro ?

FCP doesn't work with 3GPP, which is basically a cellphone compression format. FCP only works with media in the QuickTime framework. It only works with video in standard video frame resolutions, which 800x480 isn't, and with video that uses uncompressed audio, while yours is compressed.
Standard definition video is 720x480 at 29.97fps with uncompressed 48k audio in a production codec, which H.264 isn't; it should be either DV or DV50 or ProRes.

MP4 (MPEG-4 MOVIE) FILE IMPORT TO FINAL CUT PRO X

I have some MP4 files I am unable to import into Final Cut Pro X from a Hard Drive. 1920x1080, Codecs: MPEG-4 Video, Linear PCM, Audio Channels: 2 Total Bit Rate: 35,253 ...
Any suggestions as to what steps I need to take to be able to import them into Final Cut Pro X ???

Okay, I fugured it out ... the footage I was provided was from a Sony XDCAM source ... the link below gave the information needed ...
Final Cut Pro X: Importing Sony XDCAM media http://support.apple.com/kb/HT4724
Just follow the instructions ... the sony documentation for the two downloads indicated that this would not work for FCP X ... but it did work fine ...

Video quality changes when imported into Final Cut Pro

I have video files that I have imported from an external hard drive that were transferred from an HD camera. When viewing the footage directly from the hard drive, the quality is great. Once imported into Final Cut Pro, however, there are small "flares" (don't know how else to describe them) that appear for split seconds across the screen. The best way to describe it is if you are watching a television that has an antenna, there will be static or interferance on the image. This is barely noticable but I can't determine what would cause the decline in quality. My video settings are set to DV NTSC 48 kHz and wonder if this is the problem or if anyone knows of something else that I should change prior to importing.

Thank you so much for your help! I am technically challenged and STRUGGLING to say the least.
Some files are definitely H.264 and I can convert them to ProRes. I also have clips that are
DVCPRO HD 1080p25, 1,440 x 1,080 (1,888 x 1,062)
Linear PCM, 16 bit big-endian signed integer, 2 channels, 48000 Hz
Current Size: 1,440 × 810 pixels
Will I need to do anything to those as well?
Here is the question I'm afraid to ask because I think I know the answer already. Can I simply replace the clips in my sequence with the newly compressed ProRes files or do I have to change all of the video and sequence settings and then start all over?

Is there an easier way to work with adobe after effects and final cut pro x

I use adobe after effects and I am thinking about deleting motion and compressor ( I can always install again). If you have a good reason to keep those apps let me know because I don't want to be hasty. If I delete them and stick with after effects and final cut pro... Is there a secret to easy working between FCPX and adobe after effects?
Thanks

You'll go from FCP X to and from Motion a lot easier than AE. Motion does pretty much anything AE does, most of the time faster and easier. Without Motion, you can't do custom templates. You can't customize the encoding of files without Compressor. Why would you want to remove them from your system? Leave them, use AE if you want along side of them. But I'd learn Motion first. Cause AE doesn't read FCPXML, so going back and forth between them is a PITA.
And until Apple releases the round trip between FCP X and Motion fully, we have this gem:
http://www.alexnking.com/2012/02/20/fcpx-send-to-motion-app/

After shirring Blu-ray does not want to read disk. If it's setting, how to setting correctly. This happened after update. Final Cut Pro X 10.1.1

After shirring Blu-ray does not want to read disk. If it's setting, how to setting correctly.
This happened after update.
Final Cut Pro X 10.1.1 & Mac Pro 10.9.2

Just refuse to open.
Player show me first page (background) & refuse to open.
Thanks. Greg.

Will final cut pro X 10.0.8 still be available for purchase after the new final cut pro release for mavericks/new macpro in december?

will final cut pro X 10.0.8 still be available for purchase after the new final cut pro release for mavericks/new macpro in december?

10.0.8 is no longer available, except in the trial version. The current sale version is 10.0.9. Apple has never sold older versions of their software, only the current version. That's not going to change in the near future.

After effects vs final cut pro?

Is comparing adobe after effects to final cut pro, a fair comparison? What I mean is, looking around on youtube, I see better... effets on projects made with projects on after effects. now, I love FCP for editing, does adobe give a better program thats can do effects. I am looking to make my videos look more profesional, and I notice after effects has effects built into its system to do effects.
After looking at this vidoe, im sold, final cut pro can not do this that quick.
http://videocopilot.net/products/action2/tutorials/guided_tour/

David Bogie Chq-1 wrote:
I am looking to make my videos look more profesion< </div>
Effects do NOT make your videos more professional. Professionalism is the only thing that can make your videos appear to have been produced, written, shot, and edited by a professional. Even faking professional video requires elevated professionalism.
Hey! Just wait one second! That's is NOT what is promised by Apple and whoever makes those promises! All I have to do is buy the computer and the software and I'm a "professional!"
But I truly and strongly encourage you to go ahead and purchase After Effects based solely on the Video Copilot tutorials. Know in advance that AE is about ten times as complex as FCP ever will be and you will want to post extensively in the Beginner's AE Forum on the cow.
bogiesan
I would also suggest extensive posting in the FCP Beginners forum on the Cow for the OP.

How can I restart media import in final cut pro?

The operation of background activities on Final Cut Pro is often convenient, except when an import gets interrupted by an inadvertant media removal. I usually have multiple SD cards connected to my Mac doing imports, and if I have more media than I have adapters/slots to connect them with, I will invariably unplug the wrong card, and interrupt an import that is in progress. When I put the card back in, there is nothing that I can see to "restart" the import of that media where it left off at, or at least start over, and overwrite any incomplete files. Instead, it seem that I need to import the card into a new event, and then use finder to then move the media files into the old event folder structure. Only then, can I get something that seems to work.
Is there some other way to reliably restart the import, or otherwise force the import to actually work? It seems that if I try to import to the same event, again, I see the animation of the closing file selection dialog toward the events, but the background tasks window shows no activity, and I don't see anything ever complete as an import.
This, also blocks any attempt to "share" the project too, because it keeps complaining about an import which has not finished, and thus the project is still referencing "media on the camera" . That limitation has got to go away too! I really want to construct my project, share it, and move on. Waiting for media to "import" when I actually can construct the project with the preliminary media view doesn't make sense. Even if importing needs to happen for conversion/rendering for the share, just do that in the background. Let me say "share", and go do something else with my time!
I have submitted feedback on this, but if anyone has pointers of simplifying import from SD cards that would be great!

Select the photos you want rotated, open the Inspector (command-4). In the Video section of the Inspector, hover your mouse near the Transform and click show if it's not already open. The rotation setting is in there.

Rendering After Effects to Final Cut Pro

I'm very new to Final Cut Pro and After Effects. I've managed to learn the basics for FCP on Lynda.com and I can create a basic video. What I'd like to do now is create text intro that I can apply to the beginning of all my videos. I learned about the text effects in After Effects. From with After Effects I can open a text effect and create the text that I want. My question is, what settings should I use to export this to a format that I can then import into my movie timeline in FCP?
I'm creating HD videos in YouTube at 720p.
Any help would be greatly appreciated.

Captain Mench wrote:
Now -- if you need to export an alpha channel out of AE then you'll need some specific formats.
Good luck,
CaptM
Welcome home, Mench!
To maintain the alpha channel from AE, the OP will want to look up how to be using two codecs, Animation and ProRes 4444. Both are extensively described in the help system for FCP and After Effects or just google them for several hours of interesting reading. The OP will also need to understand the concept of an alpha channel which, come to think of it, was difficult for me.
bogiesan

How do you move text edited in After Effects into Final Cut Pro?

I edited text in After Effects and want to use it at the start of my movie which is in Final Cut Pro.
How do I export the After Effects editted text into FCP?
I have FCP 7
Thankyou

I suppose the way to do it is to export to Quicktime and import that into FCP X.
Use ProRes 4444 codec in order to preserve transparency (alpha channel).

How do I import my Final Cut Pro 10 (FCPX) XML files into Logic 9?

I am using 10.0.5. Which is the latest version Of Final Cut Pro X. I export my project out as a XML in FCPX. Then went into Logic 9 clicked on import then selected XML how ever the XML file was grey and Logic wouldn't come up as a valid XML to import. Please help me! Thanks

AFAIK Logic 9 can't import the form of XML that FCP X outputs.
There may be other ways to bridge the gap, but since I don't use Logic 9 I can't help further.

Exporting from After Effects to Final Cut Pro

Hi
Could anybody tell me the best way to export from After Effects, back in to Final Cut Pro? Do I need to get Automatic Duck for this, if so which one?
Thanks for any help!
Matt

You need to add your composition to the render cue and then export to the same format and codec that you're using in FCP. Automatic Duck is a great tool for getting your FCP or Motion timelines into After Effects but most of the time I simply select a clip in FCP, export it as a reference movie, bring it into AE for processing, then render a file to use as a replacement in FCP.
Search for After Effects Final Cut Workflow and you'll find some more tips including this one. It isn't bad for organization but it misses the point of using the same codec. All my FCP projects are ProRez HQ or ProREZ 444 so that's my choice. Also, if you use the entire shot, which is not a bad idea, then you can use the replace footage option in FCP which is more efficient than the demoed technique of dragging your rendered shot into the timeline and then trimming if needed.
Hope this helps.

All audio tracks won't import to final cut pro...sigh :-(

Hello I'm Dani, probably a novice in comparison to regular final cut pro users
I have a big problem with putting any music onto my timeline. It always says 'files not recognised' when I try to import any type of audio file. Thus far I have only managed to place two music tracks onto a timeline, but have been unable to differentiate anything between the two files that import and the hundreds that won't!
Please help, I think there is probably a really simple solution but I cannot figure it out x thanks x

Your music tracks are probably in an incompatible format. What are the file extensions for these music files? See if you can bring them into compressor and convert to 48k16 bit aiff (probably the best format for working in fcp).

Freezing after importing media - Final Cut Pro 10.0.9

Similar Messages

Maybe you are looking for