Freezing, Application Ending while using PSE 12 during editing.

Good afternoon, I'm using PSE 12 and the application keeps on freezing and ending during editing. Just purchased a new MAC laptop that is running Yosemite 10.10. Any advice? Thank you in advance.

CSanchez98
If your program is Photoshop Elements 12, you have posted in the wrong forum. Your thread has somehow been posted in the Adobe Premiere Elements Forum (video editing).
Please repost your thread in the Adobe Photoshop Elements Forum
https://forums.adobe.com/community/photoshop_elements
or wait for a moderator here to see your thread here and move it from here to there.
Much has been written about Photoshop Elements 12 on Mac Yosemite 10.10 and the good people in the Adobe Photoshop Elements Forum should be
able to advise you with the best information possible on this matter.
ATR

Similar Messages

Video playback in ALL applications stutters while using battery only.

Video playback in ALL applications stutters while using battery only. All OK when running from power adaptor. New battery did not fix. Recently updated iTunes to 11.0.5 and Flash player 11.8.800.94 .

Thank you again andyBall_uk.
I have successfully run Apple Hardware Test and it returned the error code...
4SNS/1/40000001:VPOR
A Google search reveals that this is a sensor error. The "V" of VPOR indicates a voltage sensor and the "P" indicates the sensor is on the Power bus. However don't yet know what the "OR" refers to.
I have had a non operative optical disk drive for a year or more but the fault with the video only developed in the last week or two. Could the "O" in VPOR refer to the Optical drive?
By the way, I got the impression from the instructions on running the Apple Hardware Test that I had to use the internal dvd drive to run the APT program from the install disk. But this turned out to be not the case. Just put install disk ito an external drive plugged into the usb ports and use system preferences to set this drive as the start up disk.

BW Application Error while using Web Application Designer Functionality?

Hi,
An error came while using Web Aplication Designer functionality.
Can anyone please help me to resolve this issue.
X person Developed a web template, but when Y person attempted to broadcast the associated query result, an error message returned indicating access was denied: <b>part of error message Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI.</b>
<b>The same X person developed a web template, but when he attempted to broadcast the associated query result, an error message was returned indicating access was denied.</b>
From these test results it appears as though the errors encountered are authorization related. It is a requirement that web templates developed by X to be broadcasted.
I need to understand what permissions the X person requires in order for this to work so that his access can be changed.
Waiting for response.
Thanks & Regards.

The last two days have been frustrating. The error above also appeared when I was trying to view one of the relationships in one of my entities.
What seems to have been happening is Designer showed a relationship existing after it had been deleted. This seems to be a bug in Designer. These rouge links can be deleted in the RON (although if you try to look at their details the RON will crash with the error in original query). After this cleanup everything worked like clockwork.
Hannah Fraser

Application error while using security.policy feature

I am learning Java by reading http://java.sun.com/docs/books/tutorial/
While studying the "Security/Quick Tour of Controlling Applications" part I compile GetProps.java example:
import java.lang.*;
import java.security.*;
class GetProps {
public static void main(String[] args) {
String s;
try {
System.out.println("About to get os.name property value");
s = System.getProperty("os.name", "not specified");
System.out.println(" The name of your operating system is: " + s);
System.out.println("About to get java.version property value");
s = System.getProperty("java.version", "not specified");
System.out.println(" The version of the JVM you are running is: " + s);
System.out.println("About to get user.home property value");
s = System.getProperty("user.home", "not specified");
System.out.println(" Your user home directory is: " + s);
System.out.println("About to get java.home property value");
s = System.getProperty("java.home", "not specified");
System.out.println(" Your JRE installation directory is: " + s);
} catch (Exception e) {
System.err.println("Caught exception " + e.toString());
When I run it without security manger it prints all the property as it has to:
E:\Test>java -jar GetProps.jar
About to get os.name property value
The name of your operating system is: Windows XP
About to get java.version property value
The version of the JVM you are running is: 1.6.0_03
About to get user.home property value
Your user home directory is: C:\Documents and Settings\mikhail
About to get java.home property value
Your JRE installation directory is: C:\Program Files\Java\jdk1.6.0_03\jre
When I run it with security manager it prints the first two properties only and throws AccessControlException on user.home property as it has to either:
E:\Test>java -Djava.security.manager -jar GetProps.jar
About to get os.name property value
The name of your operating system is: Windows XP
About to get java.version property value
The version of the JVM you are running is: 1.6.0_03
About to get user.home property value
Caught exception java.security.AccessControlException: access denied (java.util.PropertyPermission user.home read)
But when I run it with security manager and security policy allowing access to user.home and java.home properties it nevertheless throws AccessControlException, in spite of that mypolicy file grants access to these properties:
E:\Test>java -Djava.security.manager -Djava.security.policy=mypolicy -jar GetProps.jar
About to get os.name property value
The name of your operating system is: Windows XP
About to get java.version property value
The version of the JVM you are running is: 1.6.0_03
About to get user.home property value
Caught exception java.security.AccessControlException: access denied (java.util.PropertyPermission user.home read)
Here is content of mypolicy file which I created by using policytool utility:
grant codeBase "file:/E:/Test/" {
permission java.util.PropertyPermission "java.home", "read";
permission java.util.PropertyPermission "user.home", "read";
My system:
MS WindowsXP Professional, Servis Pack 2
Sun SE JDK 1.6.0_03
What am I doing wrong?
Thank you, Mikhail.

The last two days have been frustrating. The error above also appeared when I was trying to view one of the relationships in one of my entities.
What seems to have been happening is Designer showed a relationship existing after it had been deleted. This seems to be a bug in Designer. These rouge links can be deleted in the RON (although if you try to look at their details the RON will crash with the error in original query). After this cleanup everything worked like clockwork.
Hannah Fraser

My Premier Pro freeze up when I use multi cam edit

Hi everyone,
I am using Mac Book Pro 2.3G i7 4 core, 16G RAM, NVIDIA GeForce GT 750M 2048 MB, OSX10.9.5, with Premier Pro 7.2.2. When I use multi cam feature to edit, screen have delay, and when I have more than 3 cam or if I press the buttons too fast, sometimes the program freeze up.
I am editing RAW footage from my Canon C100 AVCHD, 24f.
Questions:
1/ is there any setting on program that can improve the situation?
2/ if it is a hardware resouce issue, what Mac Pro I have to buy? I am thinking 32G RAM and 512G SSD, but a bit confused on the 4, 6, 8 core and clock speed. Should I get higher clock or more core? Or should I get basic CPU but upgrade the video card with more video RAM?
Any user with similar experience please give me some insight.

You're question is very general, more info please -
What version of Premiere?
Which Project Preset are you using?
What clip format are you Importing?
Computer specs?

Getting "IPEnqueueError end" while using ReSubmit utility

Hi Gurus,
When I tried to to resubmit the failed message using resubmit utility, I am getting "IPEnqueueError end" as output. I have pasted the output of this test. I am using file system. Please suggest.
D:\OracleB2B-Installation\OraHome_Cache\ip\install>java oracle.tip.adapter.b2b.data.ReSubmit AC18E5411208A6D52790000013154280
Resubmision started for message IDAC18E5411208A6D52790000013154280
Message Id to resubmit : AC18E5411208A6D52790000013154280
getWireMessageID AC18E5411208A6D53B200000131542F0
Agreement Name : Test_Agree_Multiple_Duns
refToMsgId !!!!!!!!!null
ACTION:rqRequestIncidentReport;SERVICE:bcRequestIncidentReportv1
Sender :PG receiver :BTGS actionName :ACTION:rqRequestIncidentReport;SERVICE:bcRequestIncidentReportv1 docType :rqRequestIncidentReport_DT docRevision :1.0 direction :Outbound ConversationId :null
Enqueue the Message
IPEnqueueError start...
conversationId : null
replyToMsgID :
C:\DOCUME~1\V05E4~1.003\LOCALS~1\Temp\ReSubmit_AC18E5411208A6D527900000131542807
030.xml
IPEnqueueError end.

Hi Ramesh,
Thanks for your prompt reply,
Have changed the tip.property ReSubmit.InboundResubmission as FALSE.
Also since i'm trying to re-submitt more than one messages i'm using the command
java oracle.tip.adapter.b2b.data.ReSubmit "2009/04/24 06:06" "2009/04/24 06:24" TPName
But the above command is giving the error mentioned below.
Rsubmission with 3 argument > startdate, enddate and TPName
total number of Messages : 10
0 : individualMsgId : AC18FC3D120D6849E05000001CE64F90-1
Message Id to resubmit : AC18FC3D120D6849E05000001CE64F90-1
getWireMessageID AC18FC3D120D684998A000001CE64F60
Agreement Name : BT_Supplier_Agreement
SendMessage
Sender :E537Gateway receiver :PABSStest actionName :SendMessage
docType :SendMessage_BTWholesaleE537XML docRevision :1.0 directi
on :Inbound ConversationId :null
Resubmit feature for inbound is disabled. Please enable in tip.properties
IPEnqueue Event start...
Updated 0
oracle.jms.AQjmsException: JMS-204: An error occurred in the AQ JNI layer
at oracle.jms.AQjmsError.throwEx(AQjmsError.java:308)
at oracle.jms.AQjmsProducer.enqueue(AQjmsProducer.java:1190)
at oracle.jms.AQjmsProducer.publish(AQjmsProducer.java:1407)
at oracle.jms.AQjmsProducer.publish(AQjmsProducer.java:1291)
at oracle.tip.adapter.b2b.data.ReSubmit.sendEvtMessage(ReSubmit.java:646
at oracle.tip.adapter.b2b.data.ReSubmit.beginResubmission(ReSubmit.java:
743)
at oracle.tip.adapter.b2b.data.ReSubmit.getMessagesForTimeRange(ReSubmit
.java:147)
at oracle.tip.adapter.b2b.data.ReSubmit.main(ReSubmit.java:123)
[Linked-exception]
oracle.jms.AQjmsException: JMS-104: Message Payload must be specified
at oracle.jms.AQjmsError.throwEx(AQjmsError.java:285)
at oracle.jms.AQjmsProducer.enqueue(AQjmsProducer.java:864)
at oracle.jms.AQjmsProducer.publish(AQjmsProducer.java:1407)
at oracle.jms.AQjmsProducer.publish(AQjmsProducer.java:1291)
at oracle.tip.adapter.b2b.data.ReSubmit.sendEvtMessage(ReSubmit.java:646
at oracle.tip.adapter.b2b.data.ReSubmit.beginResubmission(ReSubmit.java:
743)
at oracle.tip.adapter.b2b.data.ReSubmit.getMessagesForTimeRange(ReSubmit
.java:147)
at oracle.tip.adapter.b2b.data.ReSubmit.main(ReSubmit.java:123)
1 : individualMsgId : AC18FC3D120D684A0CE000001CE64FA0
Message Id to resubmit : AC18FC3D120D684A0CE000001CE64FA0
Error -: AIP-13004: A context has already been started
at oracle.tip.buslogic.common.ExecutionContextManager.startContext(Execu
tionContextManager.java:194)
at oracle.tip.buslogic.common.ExecutionContextManager.startContext(Execu
tionContextManager.java:566)
at oracle.tip.adapter.b2b.utility.InstanceMessageUtil.getInstanceMessage
s(InstanceMessageUtil.java:199)
at oracle.tip.adapter.b2b.data.ReSubmit.getMessageDetails(ReSubmit.java:
332)
at oracle.tip.adapter.b2b.data.ReSubmit.beginResubmission(ReSubmit.java:
731)
at oracle.tip.adapter.b2b.data.ReSubmit.getMessagesForTimeRange(ReSubmit
.java:147)
at oracle.tip.adapter.b2b.data.ReSubmit.main(ReSubmit.java:123)
Exception while getting the messages using InstanceMessageUtility: java.lang.Nul
lPointerException
Should we add property in tip.properties or is there anything i'm missing out.
Regards,
Cema

Error comes while using calender in Edit Page? BUG ???

Hi
I am using Jdeveloper 9.0.2. My project is a BC4J project. I have created some default Browse and Edit Form on a View Object. In the Edit page when I am entering date using the calender I am getting the following error:
" Error Message: No rows available for editing. "
But if I am giving date manually, everything is fine.
Please help me.
- Arvind

Repost

Preview pictures resolution breaks down while using PSE 13 photomerge for focus stacking

Hello,
I'm new to this forum as well to Photoshop elements but I hope, someone can help me with the problem I encountered ;-)
For the technical background I've got PSE 13 installed on a Win 8.1 Laptop (Core I5, 8 GB RAM). Camera is a Canon EOS 60D with 18 MP.
I like to do macro photography and I wanted to use PSE13 for focus stacking to get a picture with higher dept of field.
Therefore, I used eight diffrently focused macro photos from a daisy blossom in raw format after processing them with the camera raw plugin.
I loaded them in photomerge ( ias "raw" but later I also tried as "jpg"s) and wanted to mark the region of the first photo to combine with the background picture.
When I zoomed in to about 150% the resolution of the image seems to have broken down and all I saw was the details in such a low resolution that I couldn't distinct between focused and not correct focused regiones. When I zoom in to the same magnification but at another point of the processings in PSE13 I do not experience this effect.
With that I cannot use PSE13 for focus stacking at all... That can't be it...
Has someone an idea whether I made a mistake or forgot to fix some settings issues or something?
Thanks in advance,
cheers,
Gruenblatt

Hello,
I'm new to this forum as well to Photoshop elements but I hope, someone can help me with the problem I encountered ;-)
For the technical background I've got PSE 13 installed on a Win 8.1 Laptop (Core I5, 8 GB RAM). Camera is a Canon EOS 60D with 18 MP.
I like to do macro photography and I wanted to use PSE13 for focus stacking to get a picture with higher dept of field.
Therefore, I used eight diffrently focused macro photos from a daisy blossom in raw format after processing them with the camera raw plugin.
I loaded them in photomerge ( ias "raw" but later I also tried as "jpg"s) and wanted to mark the region of the first photo to combine with the background picture.
When I zoomed in to about 150% the resolution of the image seems to have broken down and all I saw was the details in such a low resolution that I couldn't distinct between focused and not correct focused regiones. When I zoom in to the same magnification but at another point of the processings in PSE13 I do not experience this effect.
With that I cannot use PSE13 for focus stacking at all... That can't be it...
Has someone an idea whether I made a mistake or forgot to fix some settings issues or something?
Thanks in advance,
cheers,
Gruenblatt

Application Error while using database deign transformer

Using the database deign transformer in Designer 6i I experienced the following dialog:
"An application error has occured and an application error log is being generated. smi61.exe Exception: access violation (0x0000005), Address 0x01f6c325"
This is a repeatable error. All the table have been created but I don't know if they have been left in a clean state.
A would like to stop this happening in the future, I have done this generation successfully in the past will the same settings that are now failing (but different entities)
Thank in advance for all help
Hannah

The last two days have been frustrating. The error above also appeared when I was trying to view one of the relationships in one of my entities.
What seems to have been happening is Designer showed a relationship existing after it had been deleted. This seems to be a bug in Designer. These rouge links can be deleted in the RON (although if you try to look at their details the RON will crash with the error in original query). After this cleanup everything worked like clockwork.
Hannah Fraser

My MBP Mid 2010 with 1066mhz 8gb ram freezes and restarts while using safari. Any help?

Hi! I use MBP mid 2010. I upgraded my ram to 8gb 1066 mhz as per apple instructions. I run mountain lion. Everytime I watch a videoclip on youtube, it just freezes or mostly just turns off and restarts. I tried erasing disk twice but still same problem.

Corsair has two part numbers regarding 8GB 1066MHz DDR3 RAM.
See image below - first image is for non Apple notebook/laptop - second image is for Macbook and Macbook Pro.
Which RAM did you buy?

Short dump SAVE_NOT_ALLOWED while using CL_GUI_ALV_GRID in editable ALV

I created an editable ALV field and when i changed the value in that field and click tab or enter, then i am getting a shortdump. This is not happening regularly.
can anyone let me know the reason for this.
Sharath.

Hi
Set the handlers for the events DATA_CHANGED and DATA_CHANGED_FINISHED for your grid and handles changes in these methods accordingly.
*...local class definition
                    for event data_changed of cl_gui_alv_grid
                    importing er_data_changed,
                    handle_data_changed_finished
                    for event data_changed_finished of cl_gui_alv_grid
*...display the grid
    call method grid1->set_table_for_first_display
      exporting
        i_bypassing_buffer   = abap_true
        i_structure_name      = viewname
        is_print                      = gs_print
        is_layout                   = gs_layout
        it_toolbar_excluding = i_exclude
        i_save                      = 'A'
      changing
        it_outtab                   = <i_itab>
        it_fieldcatalog           = gt_fieldcat.
    if sy-subrc ne 0.
      exit.
    endif.
    set handler handle_double_click
                handle_button_click
                handle_user_command
                handle_data_changed
                handle_data_changed_finished
                handle_onf4
                handle_toolbar
                for grid1.
regards
Isaac Prince

How do you freeze video for a few seconds during editing

How do you make a video freeze. I need to make the video freeze effect

Place the Timeline playhead on the frame you want to freeze and hit Shift n.
-DH

Powerbook g4 freezing after restart while using install and restore cd

i want to restore my powerbook to the original settings. i insert the install and restore cd that came with my computer and after i click the install mac os x icon, the computer prompts to restart. when the computer starts to restart, it freezes and won't read from the disc. it just continues to give the message you need to restart your computer.
anyone have any suggestions or help in this matter.
thanks,

if PowerBook crashes like that when booted from original install CD, it is likely hardware problem.
try removing extra RAM, pull out AirPort card, reset PRAM
http://docs.info.apple.com/article.html?artnum=14449
and make sure CD is not scratched/dirty.
if you have original CDs kit, there supposed to be hardware test CD included with it, boot from test CD, see what it says.

IMac freezing up while using Safari

My iMac freezes up sometimes while using Safari and even trying to force quit doesn't help because the computer is totally frozen up.
I have left my Activity Monitor open and when it froze again today I was able to see that the system memory seems to be the problem area.
I see the following under System Memory:
Free          almost nothing (here's the problem)
Wired        1.09 Gb
Active        2 Gb
Inactive      3.9 Gb
Why is the ratio between Free and Inactive memory so high?
When the computer eventually unfreezes the Free memory returns to about 4 GB, seems where it should be.
Wondering what could be using the Free memory ?

You have a lot of issues.
A.
To remove the Codec-M spyware, first back up all data, then select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. For any extension with a name you don't recognize, select it and click Uninstall. If in doubt, delete all extensions.
If you use Firefox or Chrome, take the corresponding steps in those browsers. You might have to delete Chrome completely and reinstall it from a fresh download.
Triple-click anywhere in the line of text below on this page to select it:
~/Library/LaunchAgents/com.codecm.uploader.plist
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open with a file selected. Delete the selected file. Then do the same with this line:
~/Library/Application Support/Codec-M
Finally, this:
/Applications/Codec-M.app
This time you may be prompted for your administrator password.
Log out and log back in.
B.
Remove "MacKeeper" as follows.
"MacKeeper" is a scam with only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
☞ Quit MacKeeper before dragging it to the Trash.
☞ Don't empty the Trash. Let MacKeeper delete itself.
☞ Don't try to drag the MacKeeper Dock icon to the Trash.
C.
Remove "Rapport" by following the instructions on this page.
D.
Remove "Eltima Player," which is garbage.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and (unless otherwise specified in this comment) I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.
E.
If your ISP is not StarHub Cable Vision in Singapore, you need to change your network settings. Ask for instructions.
F.
Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock all your user files, reset their ownership, and remove their access-control lists. If you've set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.
G.
If you still have problems after all the above, remove "SurfEasy."

Stop Playback Looping During Editing

Can't seem to find where to set the loop/don't loop option. At the end of the timeline, the playback goes to the beginning and starts playback again. I want it to stop at the end and not loop (during editing). Can you help me find the setting to stop it from continuing playback from the beginning of the clip (stop playback looping during editing).
Premiere Elements 10
Win7(64)

There is no direct way to stop playback AT the last Frame.
Does the End key not work on your computer?
Once playback has been stopped, the PageUp and PageDn keys will take you to the first Frame of the last Clip, or to the first Frame of that last Clip. The Cursor keys will also step you, Frame-by-Frame, inside the Clip.
Good luck,
Hunt

Freezing, Application Ending while using PSE 12 during editing.

Similar Messages

Maybe you are looking for