Freezing iMac G5 with random red and black pixels, HELP!
Hello all, and thanks in advance for helping. Here's my dilemma: I have a 20" iMac G5 that I have been using for 2-3 years or so. I recently started doing less work on it, as I replaced it with a new 24" iMac, so now it is used for one or two programs as well as occasional internet use. The system began to become slower, then finally started freezing between minimal tasks, even something as simple as pressing TAB in Safari, to trying to make a new folder in iPhoto. We restarted a bunch of times, and even tried clearing the PRAM. Now, it freezes during the start-up and there's little red and black boxes (small, maybe 4x4 or 6x6 worth of pixels) appearing randomly on the screen. When we are able to get the system to start, after one or two small tasks (opening the Address Book, or starting Safari) the program freezes, the pinwheel starts spinning, and I lose any chance to do anything more on the computer without powering down. Any advice or suggestions is appreciated! Thanks and I look forward to hearing from you.
Hi PPRI and Miriam,
Same deal going on here. It's been a while since I last posted - meaning no problems (which is goooood). So here is the issue:
Would stop at blue screen before loading to main screen. Minor repair on HD volume, and now freezes on main screen very quickly, after booting past blue screen. A few wierd pixels are seen, which lets me know that it has frozen.
Here's what I did:
Hardware check with utility - no problems found, including logic board. From the manual, it seems like it is a software issue.
As before, I repaired a few permissions and minor repair on HD volume. Still not working.
Also opened up my vents and carefully vacuumed the dust - fans were spinning hard. Still, not working.
My next step is to do an archive & install. I'm not sure how to backup my files, so this will have to suffice. This leads me to my questions:
Q1 - How do you burn a backup, without an external HD and without being able to get past my main screen?
Q2 - I noticed a post before this one, concerning the same issue, with Miriam posting on it. Is it overkill to post the same problem/question in another thread in order to maximize the chances for a good response? Any suggestions Miriam?
Thank you for being so helpful. Apple community rocks!
(PS - will let you know how the archive/install goes. If it doesn't work, I may pay to back my files on disc, and then I'll try reformatting HD altogether. Again, will let you know how it goes).
(PS2 - Not sure if this matters, but my imac was one the ones that needed the free extended warranty for the capacitor issues - identified by the serial numbers. Doubt that's the problem since it was working fine after repairs).
Similar Messages
-
My Nokia 5530 keeps getting a red and black stripe...
Can anyone please help me with this problem i have only had this phone for two / three months and its already playing up. As I said I will just be on my phone then the screen will go black with red and black stripes going from one side of the phone to another, it will then turn itself on and off again. It is not water damaged and has not been dropped either..Anyone have any ideas what it could be?
Many Thankswhat the douch!? my sweat can cause water damage? the you are saying that nokia make really **bleep** phones! If my pocket is a a place where I, and everybody, would rest the phone, nokia engineers should make it sweat resistant!
Oh im sorry! i didnt realize i should levitate my phone to protect from myself! F*CK!
I know stupid nokia has problem with oxidation (happen before with me) and this is really an HUGE ABSURD! THIS COMPANY SHOULD BE ASHAMED! -
Did intel core 2 duo imacs come with wireless mouse and keyboard
did intel core 2 duo imacs come with wireless mouse and keyboard
raffdog! wrote:
i would also like to know if it came with a remote
Same answer the earlier ones did the later ones did not. -
I have two iMac's on the same desk (about a foot apart). One iMac pairs with both keyboards and mice. The other pairs with the mouse only; I cannot get the keyboard to connect. How do I get a keyboard and mouse to connect to each iMac independently?
Antaeus00 wrote:
I tried sending a request for help,
But did you succeeed in sending a request for help?
Did you receive a response? How long has it been since you sent a request?
but I need someone with more authority to talk to.
There is no one with more authority than iTunes store support. We herem are only users. -
Is there a way to convert a Word document with Red and Black into Spot colors in Acrobat X?
Customer sent us PDF files created in MS Word. Of course, Word creates CMYK versions of colors. I need the red text and black text converted into spot colors for 2 color output on press. Is there a way to do this? I saw another thread that said there is a Fixup in the Print Production/Preflight section of Acrobat X that has a convert to Spot, but I'm not seeing that. All I see is Convert to CMYK. I'm using Acrobat X 10.1.13 on OS X. Any help would be appreciated. He also sent the Word docs so I can drop that into InDesign and reformat the whole thing and fix the colors myself but if I can do it in Acrobat, that would be a lot quicker. Thanks!
Frequently in this scenario the red will be 100% of either magenta or yellow with 0% black. In these cases you can merely plate the Black & Magenta (or yellow) for press.
I've created a Preflight Fixup on occasion for these also.
An example shown - Note it requires the document is cmyk. MS Files will be rgb. You could create a Preflight looking for rgb colors.
With Fixup tab selected - Options > Create New Fixup > Type of Fixup - search for Spot in the field -
This beautiful iMac27 has great specifications, but does not function properly. The brand new computer keeps freezing up. The cursor can be moved but has no effect on any of the widows that are open. Some times it unfreezes all by itself after a while. I looked up this issue on the net and it appears that I am not the only one having this problem. Lugging the computer to an Apple store for service and not being able to replicate the problem when the technician tries it, will be very frustrating (as it has happened to several other owners). As such, I am returning the computer immediately and keep watching the discussion boards to see if this problem gets fixed before I place my order again. I will greatly appreciate if any one with this problem (freezing up) has come up with a real soultion by themselves or through technical help from Apple.
I looked up this issue on the net and it appears that I am not the only one having this problem.
Where did you find this information? It's rare that a brand new iMac would freeze up like you are describing.
Did you install anti virus software?
Or an an called MacKeeper?
Any third party software ???
Check login items.
Open System Preferences > Users & Groups > Login Items. Remove all items.
Same for HD > Library > StartupItems
Then restart your iMac to test.
You have 14 days from the date you received the iMac for an exchange or refund. And your iMac comes with a one year limiited warranty.
message edited by: cs -
IMac starts with fan, screen stays black
When attempting to start my iMac G5 (Ambient Light Sensor), fans come on but screen stays black. A couple minutes later, the fans rev up and run very quickly and loudly. This started happening when:
1. One day the screen showed a green question mark with a message indicating that the computer needed to be restarted in a box
2. Green lines were all across the screen
3. I forced it to shut down by holding down the power button
4. When I attempted to start it back up the fans started but the screen stayed black
5. After a couple of minutes, the fans revved up
This has been happening ever since. One time the computer started to the desktop but everything was frozen. I have reset the PMU, checked the diagnostic LEDs, reset the PRAM-basically everything suggested. Can anyone help? Thanks!Try the suggestions mentioned in the following Articles:
http://docs.info.apple.com/article.html?artnum=301283 Troubleshooting when there's no picture on the display
http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).
Strongly recommend that you update to OS 10.4.11. Your system info confirms you are still using the basic Tiger OS. -
W520 random sleeping and black screens - videos of issue attached
Btw my mobo,cpu,memory i believe were all replaced last time i took it in with this issue...
Still getting it consistantly:
Random Black Screens and Random Sleeping:
www.youtube.com/watch?v=AvWl9ck26xI
Black Screen:
www.youtube.com/watch?v=7A3NqnC80iU
I thought before maybe its Bluetooth related as sometimes when screen would turn black and then come back, I would get a 'Bluetooth Device Not Discoverable'. So turned off Bluetooth in the BIOS, but still having display/sleep issues.
I removed hte Lenovo Power Manager/PM Driver, and turned off sleeping in the Windows power settings (in every setting including if Low Battery Action). Any ideas?
I just upgraded to a 3 year warranty (the more expensive one), should i just ask to replace mobo/cpu/memory again or will Lenovo actually test it for other issues?
Thanks,
Ari
Solved!
Go to Solution.Well my issue wasn't an external monitor... it would goto sleep by itself when Im trying to write code/programming... then randomly wake and go back to sleep up constantly ruining workflow (or wait a few hours Im sleeping at odd times in the morning lol). or the monitor would turn black suddenly. I think I tested via external monitor but didn't matter what result was, the random sleeping issues indicated a larger issue.
It was a crimped connector the 1st time it went back to Lenovo. the past 4/5 times its gone back i think they are stumped. For me, Im honestly not sure... it might be the OS is on a mSATA instead of the regular hard drive and Windows doesnt know how to handle that hardware.
Their newer W540 manual seems to indicate do an OS on mSATA at your expense.
Do you have an mSATA OS? Anyway, thats a very small chance. not sure. -
We are trying to use test runner with dynamics CRM.
MS Dynamics CRM will freeze and will not respond (even after 10 - 15 minutes). When this happens, the test manager will either freeze or a message will apear saying "waiting for application under test".
We are not recording action recordings...This makes using test manager impossible. It happens consistently, starting with slowing the PC down (mouse moving slowly, slow to load in new screens, drop downs etc) eventually leading to the app freezing.
Tried on windows xp, windows 7 etc on various specs of pcs.I am experiencing this same issue with
Test runner freezing when used with Dynamics CRM. I notice this was first posted in June of 2010 and so far no
resolution? I was wondering if it could be related to memory issues? Do you have any troubleshooting ideas? The
issue for me seems to be sporadic and I can't
reproduce it every time.
The message I get is "waiting on application under test".
DLM -
DOes anyone know the cost of having my HD replaced by Apple, can not get any idea of cost anywhere. I rang Apple Belfast who didn't know they put me through to tech support and he didn't know either. My iMac is 21.5 2009 with 500gb. I would just like some idea before I take it up to them. It's almost certain that the HD is fried can not boot to external can not get off white screen by doing all Apples checks for white screen. So worse case is probably the HD and would like to know what I will be up for, if it is the worst case. I can supply more info if anyone can help . Pleaseeee
I have the same iMac as you but with a 1 TB hard drive.
Apple replaced the 1 TB hard drive of iMacs manufactured between October 2009 and July 2011 because of problems. When I took my iMac, the Genius gave me the bill (even if the repair was free) and the 1 TB hard drive cost about $100. This was with a 1 TB Seagate hard drive, so the cost for a 500 GB hard drive may be smaller, depending on the brand -
Working with random numbers and probabilities
Hi again,
i am working with random numbers at the moment.
in the first step i do create a random number between 3 and 8 which is stored to a variable.
set myVAR1 to random number from 3 to 8 as integer
Lets assume myVAR1 is 5
Now i want to select 5 numbers out of number pool from 1 to 8. Each number should be pickable only once.
How would i realize that ?
I guess i need some kind of pool, array and then select 5 out of this array, but i am not sure about the syntax.
In best case i would like to add probabilities to those 8 numbers in the pool.
i.e.
1 (5%),2(5%),3(20%),4(10%),5(20%),6(10%),7(15%),8(15%)
any help is heavily appreciated
best regards
fidelHello fidel,
For selecting unique numbers from given pool, try something like this.
--SCRIPT 1
(* select unique numbers from pool *)
set pool to {1, 2, 3, 4, 5, 6, 7, 8} -- number pool
set n to random number from 3 to 8 -- selection count
return {n, random(n, pool)}
on random(n, pool)
set kk to {}
repeat with i from 1 to count pool
set end of kk to i
end repeat
set rr to {}
repeat n times
set k to kk's some integer
set kk's item k to false
set end of rr to pool's item k
end repeat
return rr
end random
--END OF SCRIPT 1
For introducing selection weight of each number in the pool, you may try the below.
--SCRIPT 2
(* select unique numbers from pool with stochastic weights *)
set pool to {1, 2, 3, 4, 5, 6, 7, 8} -- number pool
set weights to {5, 5, 20, 10, 20, 10, 15, 15} -- selection weight
set n to random number from 3 to 8 -- selection count
return {n, random(n, pool, weights)}
on random(n, pool, weights)
script o
property ww : weights
property pp : {}
property kk : {}
property rr : {}
repeat with i from 1 to count pool
repeat my ww's item i times
set end of my pp to pool's item i
end repeat
end repeat
repeat with i from 1 to count my pp
set end of my kk to i
end repeat
repeat n times
set k to my kk's some integer
set end of my rr to my pp's item k
set j to 0
set i to 1
repeat with w in my ww
set j to j + w
if k > j then
set i to j + 1
else
repeat with h from i to j
set my kk's item h to false
end repeat
set i to 1
exit repeat
end if
end repeat
end repeat
return my rr's contents
end script
tell o to run
end random
--END OF SCRIPT 2
Hope this may help,
H
Message was edited by: Hiroto -
Xml slideshow with random PICTS and mx.transitions
Hi All,
I am building a web banner with a slideshow with random picts via xml,
but i want to use a iris transition to fade in while getting the pict, and fade out with the iris transition, the last action works but when getting i cannot get the transition to work below is a piece of the code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
pauseTime = 2000;
xmlImages = new XML();
xmlImages.ignoreWhite = true;
xmlImages.onLoad = loadImages;
xmlImages.load("images.xml");
function loadImages(loaded) {
if (loaded) {
xmlFirstChild = this.firstChild;
imageFileName = [];
totalImages = xmlFirstChild.childNodes[0].childNodes.length;
for (i=0; i<totalImages; i++) {
imageFileName[i] = xmlFirstChild.childNodes[0].childNodes[i].attributes.title;
randomImage();
function randomImage() {
if (loaded == filesize) {
var ran = Math.round(Math.random() * (totalImages - 1));
picture_mc._alpha = 0; // Start image clip as invisible
picture_mc.loadMovie(imageFileName[ran], 1); //Load random image from xml
var pictureTweenIn:Tween = new Tween(picture_mc, "_alpha", Normal.easeIn, 0, 100, 4, true); //WORKS!
mx.transitions.TransitionManager.start(picture_mc, {type:mx.transitions.Iris, direction:mx.transitions.Transition.OUT, duration:3, easing:mx.transitions.easing.Regular.easeInOut}); // DOES NOT WORK?
pictureTweenIn.onMotionFinished = function () { // When done fading
_root.pause(); // Start pause() function
function pause() {
myInterval = setInterval(pause_slideshow, pauseTime);
function pause_slideshow() {
clearInterval(myInterval);
var pictureTweenOut:Tween = new Tween (picture_mc,"_alpha",Normal.easeOut,100,0,5,true);//WORKS!
mx.transitions.TransitionManager.start(picture_mc, {type:mx.transitions.Iris, direction:mx.transitions.Transition.OUT, duration:3, easing:mx.transitions.easing.Regular.easeInOut}); //WORKS!
pictureTweenOut.onMotionFinished = function() {
_root.randomImage(); // Call next randomImage()
If anyone can help me out this would be great!
Mikki65Good question. Not sure about iDVD. But I know for a fact I can use random transitions within DVDSP. However, if I'm not mistaken in iDVD I may be limited to the same transition within any given slideshow. I know it's possible to bring in an album into iDvd. And I know it's possible to use KB effects. But let me do some more searching for you because I forgot the exact procedure/s. I'll post back here later.
In the meantime you may also wish to review these slideshow apps as well:
http://www.lqgraphics.com/software/phototomovie.php
http://www.boinx.com/fotomagico/overview/ -
How can i connect my apple tv 2 to an rca entrance with yellow red and whit
i need to connect my apple tv to a yellow red and white entrance can anybody help me?
Winston Churchill wrote:
Such converters would need to be HDCP compliant and if your TV is not widescreen they would also need to incorporate a scaler. I know of no such device that incorporates both technologies and posting details of devices that can circumvent copy protection (HDCP) are not permitted under the terms of use for these communities.
my tv is a widescreen HDTV. it has a DVI-D port and RCA red and white audio inputs. i can purchase a HDMI to DVI-D cable. the only issue that i have to sort out is the audio. so, what converter do i need to convert from digital audio to analog? -
User Registration in internet: Image with random digits and letters
Hi All,
as one want to register himselft on a website, last days he sees next to personal infomation fields an image with randon letters and digits. He must enter in a field manually what he sees, to let the web-application know that he is no robot.
Question 1. What is the name of it?
Question 2. Is there any free jars to generate this images?
Thanks to all.> :whisles: what?
Okey nothing happend
Stop talking about that
-- Raddadi, "Reply #10"� -
Do new Imacs come with Microsoft Excel and Word for Mac installed?
Or do I have to order it in the options when I go to get a new Imac? I use Excel and Word spreadsheets. Thanks.
No.
You would have to purchase these separately through either the Mac App Store, Microsoft or through a third party software sales vendor.
OR you can purchase through the Mac App Store iWork suite of apps that includes Pages (word processor/page layout app) Numbers ( spreadsheet app) and Keynote ( slide and audio/video presentation software).
Maybe you are looking for
-
When i try to export a video in FCPX 10.0.3 i get this error message
When I try to export a edited video in FCPX I get this error message.... The operation couldn't be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.) Any one know how i can export please? What and why am I getting this message.
-
Hi all, My Macbook is quite new (still white!) and rather brilliant. However the wi-fi seems to randomly drop, but only at home, it seems fine in the office. Home config is Zyxel 660HW router with WPA wireless encryption, Macbook is OS X 10.4.10 Just
-
RDS 2012 R2 best design possible with wildcard certificate
Hi! I am looking for some guidance for my RDS 2012 R2 design flaw. What I would like to achieve? *I would like my users either internal or external to be able to connect to RDWeb via one single webaddress ( remote.mydomain.com) What I have in place?
-
Problem with InfoView calendar widget
I am using Crystal Reports Server XI R2 I was able to successfully run reports containing date/time parameter with InfoView in a browser. However after installing stand alone Crystal Reports Viewer on the same machine as the server I now see errors o
-
Not able to deploy ADF app in weblogic
hi all, I am using 11.1.1.5 . when I am trying to deploy adf app ,I am getting this error. An error occurred during activation of changes, please see the log for details.[J2EE:160149]Error while processing library references. Unresolved application l