Freezing ipod/Sounds coming

My ipod keeps freezing on songs and just freezing in general. This started a few days ago. It never use to do it either. I got the sad Ipod file shown on my ipod & then a link to this site. I really don't know what to do.
Also, when I use Itunes my internet connection goes down. It's weird.
This is my second Ipod because the first one had a hardware problem. They sent me a new one.
I hope someone can help!

Hello,
In case the above does not solve
Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem or corrupted system files on your IPod, and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery replacement (with pictures)
http://www.kokopellimusic.us/KM_instructions.htm
Have I tried this myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

Similar Messages

  • My daughters Ipod touch 2nd generation has been freezing today.  We have updated, restored etc and will not play any music as in no sound coming from it. It is almost fully charged and played ok 2 days ago. Any suggestions?

    My Ipod touch 2nd generation has been freezing today.  We have updated, restored etc and now it will not play any music - as in no sound coming from it.  It looks as if it is playing, but no sound comes out. It played ok 2 days ago. Any suggestions?

    So, here is an update to my original question, in case anyone else has this issue. I spoke with a senior adviser at apple, who had me use the "devmgmt.msc" command in the search line of Windows 7; after expanding the USB controllers menu, she had me uninstall/delete the "apple mobile device driver" and then open "control panel" and "uninstall programs." Once the menu of programs was open, she had me highlight the program "apple mobile device controller", then repair it, and restart the computer. This fixed the issue and the iPod synced.
    However, just one day ago, when I plugged in both the iPod, then the iPad (not at the same time), I get the message that "this library has already been synced to another iPod/iPad or other IOS device." It then asked if I wanted to set up as a new device or from restore of previous. That is wher I am right now; I am trying to get the same apple adviser again to discuss the case number. More to follow.

  • Freezing, no sound and ipod making noice

    Hello everyone
    I am having problems with my ipod. It freezes, sometimes the sound does not work, i reset it and voila the sound is back also there is a clicking sound coming from the ipod. I never noticed it! could be normal but i would like to hear from anyone
    Thank you so much

    You may want to try restoring the iPod
    http://docs.info.apple.com/article.html?artnum=60983
    But, that clicking noise that it's making concerns me. If your iPod is still under warranty, you may want to get it in for service while you still have the chance.
    http://depot.info.apple.com/ipod
    CG

  • I put a case on my iPod touch 5 and now there is no sound coming from the speaker.  The head phones work though.  I called Apple Support and the 2 people I spoke with seemed baffled.  Has this happened to anyone and how do I resolve this?

    I put a Griffin case on my daughter's iPod Touch 5 and now there is no sound coming from the speaker.  There is sound when we use the headphones.  Is there a mute function that I may have switched on and if so how do I turn it off?
    It was a gift bought by her Godparents in January and I live in the islands so I can't just drive it back to the store to have them look @ it!
    Called Apple Support and spoke to 2 people who seemed baffled and who could only suggest I reset the device.  Who h has not helped.
    HELP!!!!!!!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • TS1425 My iPod Classic was working fine all day.  Came home and uploaded to voice memos via iTunes, now there is no sound coming from my iPod.  I've used both headphones and a docking station.  The songs don't even begin, they just skip to the next one. 

    My iPod Classic was working fine all day.  Came home and uploaded 2 files via iTunes, now there is no sound coming from my iPod.  I've tried both headphones and a docking station......nothing.  The songs don't even engage, they skip to the next one.  I've tried rebooting the iPod and still nothing.  Any ideas?
    Kim

    Hi, and welcome to Apple Discussions.
    Have you tried resetting the PMU?
    I'm not optimistic that this will help any more than the procedures you've already tried, but it won't hurt to try.
    Do you still have your OS 9 installation? If so, try booting into OS 9 and see if the problems with the audio are happening there, too. If so, you can bet it's a hardware problem.
    How big is your hard drive and how much space remains available on it? If you don't have your OS 9 installation in order to check out whether it's a hardware problem and you have enough available hard drive space, you may want to try an Archive and Install of the OS in order to make sure it isn't an OS X system-wide problem. If that doesn't do it, you could back up your hard drive and restore your software.
    All of this may just be spinning your wheels, but it's all stuff you can try before shelling out a lot of money for repairs.

  • Little parasite noise sound coming out of the Ipod when charging

    When the Ipod is plugged to the wall charger, there's a little parasite sound coming out. It's barely audible but I wonder if it's normal?

    This is a normal sound when charging the iPod, in fact almost all electronics give off a faint buzzing sound when charging. It is nothing to worry about, and will not affect you're iPod in any way.
    Regards--- Justin

  • Low muffled sound coming from the speakers on IPod Touch

    How can I resolve the low muffled sound coming from speakers on IPod Touch 4th generation? 
    Reset of apps was done and full reset of the IPod was done.

    This is not normal and there is no solution you can administer from home without voiding any warranty you may have... i suggest taking it to your nearest apple store and letting them know, they are very good when it comes to these small problems and will most likely give you another iPod while they fix/throw away your old one... Do a backup first though, so you can load your files back onto the new one.

  • Why is there no sound coming from my Ipod speaker?

    Why is there no sound coming from my ipod speaker?

    Do headphones work?
    Do you have volume set to max?
    You can try the standard fixes:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.
    If you still have the problem then it is likely have a hardware problem and an appointment at the Geniu Bar of an Apple store is in order.

  • There is no sound coming from my ipod!!

    Hi, I am using an itouch 2nd gen. and there is no sound coming from it when i attach my ear phones to it. I have reset the settings, restored it, switched it off many times, still nothing. The earphones are working just fine. Some help would be great!! Thanks!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod. Not clear if you did that type of restore
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. I would say not worth it for a 2G iPod
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Why isn't sound coming from my ipod nano?

    I recieved a brand new 7th generation ipod nano. no matter what I plug into the device to listen to my music (headphones, earbuds, speakers), there is no sound coming from the device. even when I attempt to use only the built- in speakers, i can hear nothing. video works fine.

    First, ipod nano 7th gen does not have a built-in speaker. Second, a brand new nano jack is sometimes ifficult to insert, make sure it is fully inserted or flushed to the ipod body. Cheers!

  • No sound coming from my ipod

    I have a 5th gen. ipod video and it works fine but the only problem is that no sound comes out.....I can't hear anything and it's not my headphones
    Toshiba   Windows XP Pro  

    Hey Dear,
    Have you got the Solution of your problem of Ipod giving no sound. I m having the same problem with my ipod. Everything seems working well in ipod but there is no sound coming out of ipod.
    Please guide me if you have got the solution.
    Best Regards
    Ajay
    [email protected]

  • My Ipod touch no sound coming through headphones ...only slight crackling of the song in left ear bud ...Ive tried other head phones it was working fine yesterday

    my Ipod touch isnt playing the music through my headphones... only a slight crackling noise with faint music comes trough the left earbud ...Ive tried other headphones still not working ...It was fine yesterday it wasnt dropped nor did it get wet.it also doesnt have any sound coming out of the internal speaker when the headphones are removed.can it be fixed?

    To rule out a software problem try the following:
    - A reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    If you still have the problem then it is likely that the headphone jack is defective.
    Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    A third-party place is less expensive. Here is one Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • I just purchased a 6  and there is a static sound coming out of the speaker when it is idle. I have the sound on low and turned off and it still makes the static sound.

    I just purchased a 128 Gig iPhone 6+. When I have the sound off and volume as low as possible, I get a static sound coming out of the speakers. It is distracting and annoying when I am in meetings, etc. Does anyone know what to do? Thanks in advance.

    Couple of things you can try but it looks like you may have to take it in
    1. Settings --> Cellular --> Change "Enable LTE" to just "Data" if available
    2. Toggle your ringer off and on
    3. Settings --> General --> Accessibility --> Toggle Noise reduction off and on
    If none of the above works - consider taking it to Apple
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support

  • Duck like sounds coming from PB

    has anybody experienced a duck like sound coming from the front of there PB? I dont know if it's my HD or superdrive.
    And now my PB is freezing on me every 15min. I did a clean install, and it's still crashing.
    G4, Powerbook and iMac Mac OS X (10.4.8)

    Hi, zeronine, and welcome to Apple Discussions. Your OS does contain an indignant "quack!!" sound file, but choosing to have that used as one of the standard system sounds (as in "Stop! You don't want to do that!") is the only way I know of to get a duck inside a Tibook.
    I would guess that you're hearing your hard drive, but I've sure never heard any hard drive noise described as "duck like" before.

  • Ticking sound coming from power button region and freezimg

    Ticking sound coming from power button region and freezing any ideas as to what happen. I shut down and grey screen comes up with nothing happening. This is when the ticking sound starts to happen
    07 polycarbonate black macbook

    BDAqua wrote:
    You need to get a few cans of air or find a compressor to blow the dust out.
    And you probably want to do that outside, as a significant amount of dust can accumulate in the power supply.

Maybe you are looking for

  • What is the difference between Routing and Call OSB regarding preformance?

    Hi excuse my ignorance, I am new to OSB and would like to know the difference in the performance of a service using the Service Callout or Routting, which would be the fastest to run? would like to know this to know what the best to use if I have a s

  • Is there a web version of the list of apps featured in the iTunes App Store?

    I like seeing the apps that Apple features in their App Store, like their Collections, or Best of 2013, or their category lists (like "Get in Shape" for the Health category). However, I think the store is a little clunky and I just want to quickly br

  • Sony Ericsson K850i Keypad Sensors Problem

    I have a k850i and i have a problem with the 3 sensors.... the problem is that the sensors work only when they whant... please help me . i send it to the warnaty and they send it me back and sayd there is no problem LOOOL ?

  • Website Tracking Software

    Does anyone know how I can insert my tracking javascript code into my iweb site? Sorry, I don't really know much about web stuff so I hope that made sense.   Mac OS X (10.4.4)  

  • Need help with my Report Header

    Hi I have this report that I had to add a column to. which i did. but the problem is I can't find where the report getting its header information from so that I can shift it so that it apears correct format. Here is the code *& Report  ZSALES