Freezing of an asset

What is the configuration for freezing of assets or shut down of an asset in a Global Template SAP 5.0 version?
Thanks & Regards,
Divya

Hi,
You can utilize the Asset Shutdown feature on the Time-dependent tab of the asset master record.
Select the Asset Shutdown checkbox - create a time interval - Save.
If you cannot find the checkbox, it could be hidden :-
In AS02 click Environment -> Screen Layout -> Master data
Select the Screen Layout and click Logical Field groups
Select 3 - Time-dependent and click Field group rules
Tick Opt, Mnno and Sbno - Save
Optionally, you can set the Depreciation key in the Deprecation Area Tab.
You can also change the depreciation key to '0000' (No depreciation and no interest) for each of your depreciation books. Just make sure you have run depreciation up through the current month before doing so. When you are ready to put the asset back into service, reset the keys to their original values. The system will calculate no depreciation during the months where you have the key set to '0000'
regds

Similar Messages

Freezes when importnig assets.

OK, DVD Studio Pro freezes whenver I try to import assets. It seems to do it to different assets at different times. I'm trying to import mpeg-2 files compressed using compressor. Any ideas?

Is it really freezing, or is it spending time 'parsing' the assets you are giving it (check to see by opening up the assets tab sideways and looking for the 'progress' bar)? How are you importing... through the assets tab or by drag/dropping files into the assets tab... or are you using the file inspector window?

Depreciation freeze for some asset for some months.

Hi
assets have been capitalized on 01.01.2012 and depreciation has been run for 1 and 2 month now the cleint requirement is that, they want to stop depreciation for some assets up to April and calculate the depreciation again from 01/05/2012. Please suggest what should we customize for this issue.
Your feedback would be highly appreciated.
Regards,
Danish
Edited by: danish01 on Mar 7, 2012 9:07 AM

Hi Danish,
One possibility is to use Shut Down feature.. and the other is using a depreciation key 0000, which is a time dependent depreciation feature and is available only from ECC 6.0 EHP4 onwards..
Before EHP4, if u use depreciation Key 0000, system reverses the entire epreciation posted in that year in that particular month, but from EHP4 onwards, system does not reverse if you use 0000 depreciation key, but only posts Zero depreciation for those months when you have applied 0000, As soon as you restore your original depreciation keys, it will again post normally..
Hope this helps..
Regards,
SAPFICO

Re-Freeze needed for older versions

I'm finding that different (older) versions of the same project saved in the same overall project folder sometimes, on loading, need to re-freeze ... when they were already frozen when originally saved.
Say I want to re-listen to the mix on version 10 of a project and I've worked through to version 18.
Version 18 has a freeze structure which may be different to the freeze structure of version 10.
But I thought I saved version 10 with all its appropriate freeze-files so why should it need to re-freeze? (Tine-consumin!)
Can anyone explain what's happenin here?

Well, I don't think it's a time-dependent thing. I just checked a Logic song file whose tracks I froze on 2009, September 30, when I bounced the tune and sent it out for mastering. I haven't opened the file since then, and the freeze files are still there in the "Freeze Files" folder inside the project folder. (The last time I worked on that file I was using Logic v7.2.3...not that it should matter.)
Anyhow, there's one data point. A song file that's over three years old, and the freeze files are still there, right where they're supposed to be.
Just to be sure I know how it works in Logic v9.1.7, I froze a track on a new song (version 03) that previously had no freeze files, and then I confirmed that Logic created the "Freeze Files" folder, and wrote the freeze file to that folder. After that, I unfroze the track, and sure enough, Logic deleted the freeze file. So if you're unfreezing the tracks, the freeze files vanish. But you probably knew that. I then refroze the track, and confirmed that the freeze file was there again.
I then saved the song as a separate project (version 04), but Logic did not create a freeze file folder for the new project. However, as soon as I attempted to play the new song file, then Logic created the "Freeze Files" folder and wrote the freeze file into that folder. So it appears that if you create a new version of the song as its own project, Logic wants you to play the song at least once to create new freeze files for that new project. It doesn't refer back to the freeze files of the previous version, or automatically include those freeze files as assets for the new project, even if you've checked the "Include assets" checkbox during the Save As... operation (which I did).
I went back and looked in the v.03 project folder, and the freeze file is still there. So I suspect that if you freeze your tracks, then save the song as a new version in its own project folder, and then play it to create new freeze files for that new version, Logic should keep the freeze files...er, unless you unfreeze the tracks, of course. The freeze files for the previous version should remain unmolested in their own project folder's "Freeze Files" folder. That's the way it works for me, at least.
If it's not working that way, you might have discovered a bug. Can you replicate the unwanted behavior?

How to lock versions to prevent inadvertent modification?

When I process valuable images in Aperture I like to use versions to capture different stages of the editing process. From such a version I may then derive one or more further variants either for different purposes or for comparison of different processing options. At some point I obtain one or more versions that I consider final. It would be very useful to be able to lock or "freeze" versions (not only the final ones) in that procedure in order to prevent them from being inadvertently modified.
I could not figure out how to do that, does anybody have a solution?
Thanks for any advice.

Thanks for the colour coding hint Léonie and Kirby Krieger. This can probably alleviate the issue and I will try it out (and provide Apple feedback).
I certainly agree with the remarks on the relativity of the "final" attribute. In any case for me the locking feature would be of more value for intermediate versions in which certain adjustments have been finalised but more work is necessary. I have the situation that starting from an intermediate version I want to compare several alternatives of rather subtle further adjustments, each of which, however, may take (me) quite some time to perform. When looking at the different alternatives in the browser view, they are so similar that you hardly can distinguish them. Here it may easily happen that when one wants to continue to work, the wrong version is selected and you do not realise immediately. This may be particularly relevant when the work had to be interrupted for quite some time. Again I admit that systematic usage of color coding can help.
May be that my desire for a locking feature relates to my experience in the software field where you certainly want (and usually have the ability) to freeze your digital assets when you consider them to be in state that you want keep or return to, independent of whether you later derive further versions from those frozen assets. To me this appears to be a reasonable mechanism for any kind of digital asset library, even if it does not require too much time to recover from accidental changes.
Regards
Philippe

Revaluation of currency

How can the revaluation of currency be done in SAP 5.0 version?
Thanks & Regards
Divya

Please let me know if there is any automatic method to freeze or shutdown asset. In particular case the company has to shut down near about 80 assets. Is there any automatic method to do the same
Thanks & Regards

CS4 Encore – freezes when HD video asset is added

Encore CS4 locks up when I try to add a HD video asset(created in Premiere Pro CS4). I can add Standard Video and Encore does not freeze. I tried of three computer freezes on Windows 7 but works on old XP. I have uninstalled and reinstalled and update CS4. I have only had Encore running. ( the HD video is a short 25 second test HD video)
Has anyone had this issue or does anyone know fix

Read all of these... then install the Roxio update
Encore CS4 Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Long File Names Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/

Freeze the partial depreciation for asset

Dear Expert,
We have special scenario for asset depreciation. In China, the assetu2019s retirement need waiting for government inspection & approval. The requester to do the physical scrap when we got the approval, and then the asset accountant will retire this asset in SAP system.
In the period of waiting of approval, the asset needs to stop the depreciation. We can shutdown or change depky 0000 for depreciation freeze, but these methods will freeze all NBV which mean the entire asset has not depreciation, but we think freeze the partial NBV and the remainder NBV still has depreciation in future.
For example,
Asset A - 01/31/2009 GAV $100 AD $50 NBV $50
This asset needs the partial scrap for $20 on 02/01/2009.
Asset A - 02/01/2009 GAV $100 AD $50 NBV $30 * 20$ will be froze.
Just need to your help, What method can carry out this result in SAP?
Thanks.

Hi,
You can use the cutoff value key and assign it in the depreciation key and in turn assign it in asset master,in your case the cutofff key would be defined as 20%. (if you want you can create a new dep key and assign it to the specific asset)
doing this will make sure that after NBV of the asset is $20, depreciation will not be carried out.
hope this clarifies youe query.
Regards,
J

When updating assets, Muse freezes.

I'm trying to change pictures in a slideshow. When Muse auto updates all new assets, the bar shows about 25% done, and then stops. If I manually update one at a time, it shows 100%, but the bar/window just sits there.
I tried deleting the slideshow, and adding a new one, but if I add anything, I get an error 2124.
Using a Mac, latest Muse version (just updated before I started working),

A 2124 may indicate a file linked to is damaged or of an unsupported file type.
Please click on the first item in the Assets panel then scroll down and shift click on the last item (so all assets in the panel are selected) and then right click and choose "Optimize Asset Size". For a large file with many assets, this process may take several minutes to complete.
Does the optimization complete, or does some error occur?
There are many services for sharing/sending large files. Most have free offerings for limited use (i.e. Dropbox, Adobe SendNow, WeTransfer, SendThisFile, YouSendIt, etc.) It will be very time consuming to diagnose the root cause of this problem without the file.

What is the problem with Adobe Creative Cloud Premiere Pro CC 2014, why it freezes often?

I Purchased the Adobe Creative Productive Premium Suite CS5 in early 2010 and I was very satisfied with it all this time, I can say that I never had a problem while using any of the Production Premium applications. Few weeks ago, I asked Mr. Philip Bloom about a technical issue regarding the best method to use a 50 FPS clip with a 23.976 FPS project, and I got his kind help but he recommended me too that I should upgrade to the latest Adobe Cloud CC 2014 which has many new features added to the different programs. I took his kind advice and downloaded a trial version of all the Adobe Cloud CC programs which I use for my filmmaking business.
Today is the 20th day of my trial period and I have 10 days left to take the decision of continuing with CC 2014 or not. The past 20 trial days were not very pleasant. I want you to share with me the following details which I'll list them as bullet points and I would appreciate diagnosing the problem if you can and suggest a solution for it to re-try the Adobe Cloud CC 2014 for the 10 remaining days with no further problems.
I used to have the Gigabyte graphics card GTX 470 for about 4 years and it malfunctioned last year and I replaced it with a humble Geoforce GT 610 card, but it worked fine with the Adobe Suite CS5 programs.
My system configuration is Intel Core I7 950@ 3.07GHz , installed memory 12 GB. , Windows 7 Ultimate, 64 bit Service pack 1, 3 hard drives 1TB. each (one of them is dedicated for Adobe asset files and the editing work)
For the first 2 or 3 days I used mainly the Premiere Pro CC 2014 establishing short projects for a max. of 5 minutes each and it was working normal. But, later, as soon as I started to build a project which reached about 24 minutes of length and I began to edit those before I add more clips to the timeline, unfortunately, the PrPro CC 2014 started to freeze on any of the frames every time I try to edit normally as I used to do with the CS5, so, I had to wait for 2 or 3 minutes every time it freezes, then it works for seconds then freezes again!! and during the 20 days mentioned above it crashed once.
The movie files of my project are the Nikon's .Mov files and the editing work which I performed included effects such as Color correction (levels) color correction (fast) color correction (Auto) sharpen effect, and stabilizing effect.
I installed the Magic Bullets Suite trial version, and the Neat Video trial version, aiming to purchase either the DeNoiser or the Neat Video (but I tried their effects without saving them to the project).
I used to export parts/ or whole project before finalizing the editing process to be able to monitor on a TV screen (mp4 file format) some of the changes I made in PrPro before being freezed.
Based on my previous 5 years experience using the CS5 Suite I have a strong trust in Adobe, I never thought the problem was in the PrPro application, but rationally I thought it was the graphic card (GT610), and accordingly I purchased yesterday a new Zotac Geoforce GTX 770 (listed by Adobe as an approved card) and I installed it and checked that it is running fine and I checked the processor temperature which was within the normal level.
Only today, I began to think that it might be something wrong with the Adobe Cloud CC 2014 ( a bug or something) and as a result of searching on the internet I could see lot of users since 2014 who were having freezes and crashes with the CC and the CC 2014 versions. That was a shock for me, could it be that until Feb. 2015 the same severe problem still occurs???
Sorry for any inconvenience, looking forward to seeing a solution for that serious problem.

Hello Ashraf,
Sorry you didn't get any help on this post. In the future, please contact Adobe Support for 1-1 assistance on issues like this: Contact Customer Care
Thanks,
Kevin

10.8.5 constant freeze

I have a lot of problems with my MBP 10.8.5 freezes very often. The consol shows a lot of problems and I do not know what to do to fix this and would so much appreciate help to fix this. After reading about the next generation OSX i decided to not do the upgrade at this point but do not know if that is a correct observation.
Info from EtreCheck:
Hardware Information:
          MacBook Pro (17-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,3
          1 2.2 GHz Intel Core i7 CPU: 4 cores
          16 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 512 MB
          AMD Radeon HD 6750M - VRAM: 1024 MB
Audio Plug-ins:
          AirPlay: Version: 1.7 - SDK 10.8
          iSightAudio: Version: 7.7.1 - SDK 10.8
Startup Items:
          HWNetMgr: Path: /Library/StartupItems/HWNetMgr
          HWPortDetect: Path: /Library/StartupItems/HWPortDetect
          ProTec6b: Path: /Library/StartupItems/ProTec6b
          StartOuc: Path: /Library/StartupItems/StartOuc
System Software:
          OS X 10.8.5 (12F45) - Uptime: 0 days 0:49:18
Disk Information:
          TOSHIBA MK7559GSXF disk0 : (750,16 GB)
          S.M.A.R.T. Status: Failing
                    disk0s1 (disk0s1) <not mounted>: 209,7 MB
                    Macintosh HD (disk0s2) /: 749,3 GB (494,6 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] cn.com.zte.DelMonitor.plist
          [loaded] cn.com.zte.PPPMonitor.plist
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.versioncueCS4.plist
          [loaded] com.autodesk.backburner_manager.plist
          [loaded] com.autodesk.backburner_server.plist
          [failed] com.autodesk.backburner_start.plist
          [loaded] com.ea.origin.ESHelper.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.oracle.java.Helper-Tool.plist
          [loaded] com.oracle.java.JavaUpdateHelper.plist
Launch Agents:
          [loaded] cn.com.zte.usbswapper.plist
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.AdobeCreativeCloud.plist
          [loaded] com.adobe.CS4ServiceManager.plist
          [loaded] com.oracle.java.Java-Updater.plist
          [loaded] com.wacom.wacomtablet.plist
          [loaded] com.zte.mcserver.plist
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.ARM.[...].plist
          [loaded] com.adobe.ARM.[...].plist
          [failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist
          [loaded] com.google.keystone.agent.plist
          [failed] com.plexapp.helper.plist
          [loaded] com.spotify.webhelper.plist
User Login Items:
          iTunesHelper
          Dropbox
3rd Party Preference Panes:
          Adobe Version Cue CS4
          Flash Player
          Flip4Mac WMV
          Java
          WacomTablet
Internet Plug-ins::
          WacomNetscape: Version: 2.1.0-1 - SDK 10.8
          Unity Web Player: Version: UnityPlayer version 4.1.2f1
          Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8
          WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2
          AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7
          FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6
          AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
          Silverlight: Version: 5.1.10411.0 - SDK 10.6
          Flash Player: Version: 11.9.900.152 - SDK 10.6
          QuickTime Plugin: Version: 7.7.1
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
          AdobeExManCCDetect_x86_64: Version: AdobeExManCCDetect_x86_64 1.0.0.0 - SDK 10.7
          AdobePDFViewer: Version: 11.0.04 - SDK 10.6
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
          JavaAppletPlugin: Version: Java 7 Update 45
User Internet Plug-ins::
          Google Earth Web Plug-in: Version: 7.1
Bad Fonts:
          None
Old applications:
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          RailModeller:          Version: 4.1.7 - SDK 10.4
                    /Applications/RailModeller 4.1.7/RailModeller.app
Time Machine:
          Skip System Files: NO
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 697.84 GB Disk used: 237.20 GB
          Destinations:
                    Data [Network] (Last used)
                    Total size: 2
                    Total number of backups: 75
                    Oldest backup: 2012-01-04 15:18:02 +0000
                    Last backup: 2013-12-08 10:02:10 +0000
                    Size of backup disk: Adequate
                              Backup size 2 > (Disk used 237.20 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               4%          Safari
               3%          Console
               3%          WindowServer
               3%          spindump
               2%          EtreCheck
Top Processes by Memory:
          262 MB          WebProcess
          213 MB          Safari
          164 MB          Mail
          147 MB          mds
          147 MB          Finder
Virtual Memory Statistics:
          11.51 GB          Free RAM
          2.37 GB          Active RAM
          531 MB          Inactive RAM
          1.59 GB          Wired RAM
          503 MB          Page-ins
          0 B          Page-outs
The console for approx. last couple of hours:
2013-12-08 10:18:00,121
fontd[346]
ATSFindFolder timeout. (domain:-32766, dirType:'font', createFolder:true, ATSServer pid:346)
2013-12-08 10:18:00,122
fontd[346]
FSFindFolder failed for domain 18446744073709518850: 0x4294967176. Now relying on persistent store for said domain.
2013-12-08 10:18:20,049
com.apple.SecurityServer[21]
Session 100006 created
2013-12-08 10:18:22,636
TabletDriver[329]
*** Giving up waiting for application /Library/Application Support/Tablet/WacomTabletDriver.app/Contents/Resources/WacomTouchDriver.app to launch. ***
2013-12-08 10:18:35,999
TabletDriver[329]
*** Giving up waiting for application /Library/Application Support/Tablet/WacomTabletDriver.app/Contents/Resources/TabletDriver.app to launch. ***
2013-12-08 10:18:45,476
gconfd (peterkallviks-409)[409]
_@@@@@@@@@@@@@@____/opt/dplat/bin/../etc/gconf/2//path
2013-12-08 10:19:02,672
com.apple.iCloudHelper[423]
AOSKit WARN: APS timeout encountered (cxn initialization)
2013-12-08 10:19:02,674
com.apple.iCloudHelper[423]
AOSKit WARN: Failed to get response from APSConnection's initialization method(s)
2013-12-08 10:19:24,140
com.apple.SecurityServer[21]
Session 100002 created
2013-12-08 10:19:25,283
apsd[168]
<APSConnectionNotificationQueue: 0x7fe1ab8200c0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
2013-12-08 10:19:25,284
apsd[168]
<APSConnectionNotificationQueue: 0x7fe1ab8200c0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
2013-12-08 10:19:25,284
apsd[168]
<APSConnectionNotificationQueue: 0x7fe1ab8200c0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
2013-12-08 10:19:26,000
kernel[0]
considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
2013-12-08 10:19:34,976
com.apple.time[288]
Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2013-12-08 10:19:51,668
com.apple.SecurityServer[21]
Session 100008 created
2013-12-08 10:20:01,286
genatsdb[470]
########## genatsdb Sandboxed. ##########
2013-12-08 10:20:14,618
com.apple.time[288]
Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2013-12-08 10:21:02,232
Finder[301]
_CSBackupServerProxySendMessage() failed to send message to backup server, error: -5
2013-12-08 10:21:58,561
com.apple.launchd[1]
(com.apple.quicklook.satellite.97894D95-D1D1-4537-AEFC-B61F2E1E2C8E[517]) Exited: Killed: 9
2013-12-08 10:21:58,836
SystemUIServer[300]
*** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2013-12-08 10:21:58,837
SystemUIServer[300]
*** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2013-12-08 10:22:01,576
com.apple.time[288]
Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2013-12-08 10:22:04,245
SystemUIServer[300]
FCUserCanLogin [93] -- _FCMIGUserCanLogin failed with error 268451843.
2013-12-08 10:22:23,792
NotificationCenter[316]
It does not make sense to draw an image when [NSGraphicsContext currentContext] is nil. This is a programming error. Break on void _NSWarnForDrawingImageWithNoCurrentContext() to debug. This will be logged only once. This may break in the future.
2013-12-08 10:22:28,761
Creative Cloud[331]
objc[331]: Class HTTPHeader is implemented in both /Applications/Utilities/Adobe Creative Cloud/ACC/C3ContainerBL.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
2013-12-08 10:22:28,762
Creative Cloud[331]
objc[331]: Class ProxyManager is implemented in both /Applications/Utilities/Adobe Creative Cloud/ACC/C3ContainerBL.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
2013-12-08 10:22:36,078
Creative Cloud[331]
objc[331]: Class HTTPHeader is implemented in both /Applications/Utilities/Adobe Creative Cloud/ACC/C3ContainerBL.dylib and /Applications/Utilities/Adobe Application Manager/UWA/UpdaterCore.framework/UpdaterCore. One of the two will be used. Which one is undefined.
2013-12-08 10:22:36,079
Creative Cloud[331]
objc[331]: Class ProxyManager is implemented in both /Applications/Utilities/Adobe Creative Cloud/ACC/C3ContainerBL.dylib and /Applications/Utilities/Adobe Application Manager/UWA/UpdaterCore.framework/UpdaterCore. One of the two will be used. Which one is undefined.
2013-12-08 10:22:47,005
genatsdb[470]
*GENATSDB* FontObjects generated = 815
2013-12-08 10:23:20,357
revisiond[35]
pread(9, 0x10accb000, 4662, 12624152) failed: read length doesn't match request, read 0 bytes, file is 12554840 bytes long
2013-12-08 10:23:20,779
revisiond[35]
There was a problem compacting storage file 36
2013-12-08 10:24:11,455
apsd[168]
<APSConnectionNotificationQueue: 0x7fe1ab81d460>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.AddressBook.PushNotification-user=501 darkWakeEnabled-env=production
2013-12-08 10:24:11,455
apsd[168]
<APSConnectionNotificationQueue: 0x7fe1ab81d460>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.AddressBook.PushNotification-user=501 darkWakeEnabled-env=production
2013-12-08 10:24:11,455
apsd[168]
<APSConnectionNotificationQueue: 0x7fe1ab81d460>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.AddressBook.PushNotification-user=501 darkWakeEnabled-env=production
2013-12-08 10:25:43,984
Creative Cloud[331]
open on /Users/peterkallviks/Library/Application Support/Adobe/OOBE//com.adobe.accc.home/assets/FLPR_13.0.png: File exists
2013-12-08 10:26:48,308
mds[43]
Unable to talk to lsboxd
2013-12-08 10:26:57,000
kernel[0]
fsevents: watcher dbfseventsd (pid: 721) - Using /dev/fsevents directly is unsupported. Migrate to FSEventsFramework
2013-12-08 10:27:05,922
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:27:16,024
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:27:26,126
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:27:36,228
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:27:46,330
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:27:56,431
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:28:06,533
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:28:16,636
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:28:26,737
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:28:36,839
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:28:46,940
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:28:57,042
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:29:07,144
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:29:17,246
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:29:27,348
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:29:37,450
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:29:47,553
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:29:49,376
com.apple.mtmd[42]
FSEvents timed out without an end event
2013-12-08 10:32:41,358
loginwindow[47]
find_shared_window: WID -1
2013-12-08 10:32:41,359
loginwindow[47]
CGSGetWindowTags: Invalid window 0xffffffff
2013-12-08 10:32:41,359
loginwindow[47]
find_shared_window: WID -1
2013-12-08 10:32:41,359
loginwindow[47]
CGSSetWindowTags: Invalid window 0xffffffff
2013-12-08 10:32:41,403
loginwindow[47]
ERROR | -[LWBuiltInScreenLockAuthLion preLoad] | guestEnabled is true, but guest mode is not set to a usable value
2013-12-08 10:32:41,953
loginwindow[47]
*** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2013-12-08 10:32:41,953
loginwindow[47]
*** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2013-12-08 10:35:41,404
com.apple.kextcache[445]
Kernel file /mach_kernel does not contain requested arch: i386
2013-12-08 10:39:18,000
kernel[0]
disk0s2: I/O error.
2013-12-08 10:39:18,000
kernel[0]
hfs_clonefile: cluster_read failed - 5
2013-12-08 10:39:49,828
com.apple.kextcache[445]
Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
2013-12-08 10:50:19,000
kernel[0]
PM notification timeout (pid 331, Creative Cloud)
2013-12-08 10:50:19,000
kernel[0]
PM notification timeout (pid 574, Adobe CEF Helper)
2013-12-08 10:50:19,000
kernel[0]
PM notification timeout (pid 573, Adobe CEF Helper)
2013-12-08 10:50:25,948
com.apple.time[11]
Next maintenance wake [Backup Interval]: <date: 0x7fc3cea00120> Sun Dec 08 11:16:05 2013 CET (approx)
2013-12-08 10:50:25,949
com.apple.time[11]
Requesting maintenance wake [Backup Interval]: <date: 0x7fc3cea00120> Sun Dec 08 11:16:05 2013 CET (approx)
2013-12-08 10:50:26,000
kernel[0]
hibernate image path: /var/vm/sleepimage
2013-12-08 10:50:26,000
kernel[0]
AirPort_Brcm43xx::powerChange: System Sleep
2013-12-08 10:50:26,000
kernel[0]
hibernate_alloc_pages act 401719, inact 99418, anon 9881, throt 0, spec 233293, wire 398381, wireinit 284831
2013-12-08 10:50:26,000
kernel[0]
hibernate_setup(0) took 0 ms
2013-12-08 10:50:26,000
kernel[0]
sizeof(IOHibernateImageHeader) == 512
2013-12-08 10:50:27,000
kernel[0]
kern_open_file_for_direct_io(0) took 550 ms
2013-12-08 10:50:27,000
kernel[0]
Opened file /var/vm/sleepimage, size 17179869184, partition base 0x0, maxio 2000000 ssd 0
2013-12-08 10:50:27,000
kernel[0]
hibernate image major 1, minor 0, blocksize 512, pollers 5
2013-12-08 10:50:45,000
kernel[0]
hibernate_page_list_setall(preflight 0) start 0xffffff81fae83000, 0xffffff81faf03000
2013-12-08 10:50:45,000
kernel[0]
hibernate_page_list_setall time: 729 ms
2013-12-08 10:50:45,000
kernel[0]
pages 1108663, wire 380476, act 283887, inact 26, cleaned 0 spec 136, zf 5625, throt 0, could discard act 100659 inact 89513 purgeable 15183 spec 233158 cleaned 0
2013-12-08 10:50:45,000
kernel[0]
hibernate_page_list_setall found pageCount 670150
2013-12-08 10:50:45,000
kernel[0]
IOHibernatePollerOpen, ml_get_interrupts_enabled 0
2013-12-08 10:50:45,000
kernel[0]
IOHibernatePollerOpen(0)
2013-12-08 10:50:45,000
kernel[0]
encryptStart 132f0
2013-12-08 10:50:45,000
kernel[0]
bitmap_size 0x7f5a4, previewSize 0x19bce0, writing 669453 pages @ 0x22e574
2013-12-08 10:50:45,000
kernel[0]
encryptEnd d25a600
2013-12-08 10:50:45,000
kernel[0]
image1Size 0x1a253c00, encryptStart1 0x132f0, End1 0xd25a600
2013-12-08 10:50:45,000
kernel[0]
encryptStart 1a253c00
2013-12-08 10:50:45,000
kernel[0]
encryptEnd 3924b800
2013-12-08 10:50:45,000
kernel[0]
PMStats: Hibernate write took 13346 ms
2013-12-08 10:50:45,000
kernel[0]
all time: 13346 ms, comp bytes: 2742444032 time: 2023 ms 1292 Mb/s, crypt bytes: 740552464 time: 1266 ms 557 Mb/s,
2013-12-08 10:50:45,000
kernel[0]
image 958707712 (5%), uncompressed 2742444032 (669542), compressed 951456736 (34%), sum1 71f81683, sum2 f97a694b
2013-12-08 10:50:45,000
kernel[0]
wired_pages_encrypted 194311, wired_pages_clear 185557, dirty_pages_encrypted 289674
2013-12-08 10:50:45,000
kernel[0]
hibernate_write_image done(0)
2013-12-08 10:50:45,000
kernel[0]
sleep
2013-12-08 10:50:45,000
kernel[0]
Wake reason: EC.PowerButton PWRB (User)
2013-12-08 10:53:36,000
kernel[0]
AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
2013-12-08 10:53:36,000
kernel[0]
Previous Sleep Cause: 5
2013-12-08 10:53:36,000
kernel[0]
wlEvent: en1 en1 Link DOWN virtIf = 0
2013-12-08 10:53:36,000
kernel[0]
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
2013-12-08 10:53:36,000
kernel[0]
en1::IO80211Interface::postMessage bssid changed
2013-12-08 10:53:36,000
kernel[0]
en1: 802.11d country code set to 'X3'.
2013-12-08 10:53:36,000
kernel[0]
en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
2013-12-08 10:53:36,000
kernel[0]
TBT W (1): 0 [x]
2013-12-08 10:53:39,256
loginwindow[47]
resume called when there was already a timer
2013-12-08 10:53:40,000
kernel[0]
en1: 802.11d country code set to 'SE'.
2013-12-08 10:53:40,000
kernel[0]
en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
2013-12-08 10:53:40,000
kernel[0]
MacAuthEvent en1   Auth result for: 28:cf:da:b4:ff:1b MAC AUTH succeeded
2013-12-08 10:53:40,000
kernel[0]
wlEvent: en1 en1 Link UP virtIf = 0
2013-12-08 10:53:40,000
kernel[0]
AirPort: Link Up on en1
2013-12-08 10:53:40,000
kernel[0]
en1: BSSID changed to 28:cf:da:b4:ff:1b
2013-12-08 10:53:40,000
kernel[0]
en1::IO80211Interface::postMessage bssid changed
2013-12-08 10:53:40,000
kernel[0]
AirPort: RSN handshake complete on en1
2013-12-08 10:53:59,000
kernel[0]
disk0s2: I/O error.
2013-12-08 10:53:59,000
kernel[0]
hfs_clonefile: cluster_read failed - 5
2013-12-08 10:54:00,968
airportd[1483]
_doAutoJoin: Already associated to “Zip99”. Bailing on auto-join.
2013-12-08 10:54:00,984
airportd[1483]
_doAutoJoin: Already associated to “Zip99”. Bailing on auto-join.
2013-12-08 10:54:20,652
loginwindow[47]
ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
2013-12-08 10:54:52,005
CVMServer[236]
Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
2013-12-08 10:54:53,871
CVMServer[236]
Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
2013-12-08 10:55:03,067
Mail[1524]
Using V2 Layout
2013-12-08 10:55:06,082
librariand[1531]
MMe quota status changed: under quota
2013-12-08 10:55:06,725
com.apple.backupd[1527]
Starting automatic backup
2013-12-08 10:55:10,183
Dock[299]
find_shared_window: WID -1
2013-12-08 10:55:10,184
Dock[299]
CGSCopyWindowProperty
2013-12-08 10:55:10,184
Dock[299]
find_shared_window: WID -1
2013-12-08 10:55:10,184
Dock[299]
CGSGetWindowTags: Invalid window 0xffffffff
2013-12-08 10:55:10,184
Dock[299]
CGSGetWindowOwner
2013-12-08 10:55:10,184
Dock[299]
CGSGetWindowBounds
2013-12-08 10:55:10,184
Dock[299]
find_shared_window: WID -1
2013-12-08 10:55:10,185
Dock[299]
CGSSetWindowToReleaseBackingOnOrderOut: Invalid window 0xffffffff
2013-12-08 10:55:10,185
Dock[299]
find_shared_window: WID -1
2013-12-08 10:55:10,185
Dock[299]
CGSGetWindowTags: Invalid window 0xffffffff
2013-12-08 10:55:10,185
Dock[299]
CGSGetWindowOwner
2013-12-08 10:55:10,185
Dock[299]
CGSGetWindowBounds
2013-12-08 10:55:11,931
com.apple.SecurityServer[21]
Session 100010 created
2013-12-08 10:55:16,383
Mail[1524]
Couldn't contact spell checker for Multilingual
2013-12-08 10:55:18,608
Mail[1524]
*** -[IADomainCache init]: IA domains cache couldn't be read.
2013-12-08 10:55:19,112
SyncServer[1546]
Warning: ISDLog() couldn't open the log file /Users/peterkallviks/Library/Logs/Sync/syncservices.log: returned errno 2, "No such file or directory"
2013-12-08 10:55:19,144
SyncServer[1546]
[0x7fd5b8c1ba20] |Logging|Info| Sync Services Version 713.1
2013-12-08 10:55:19,144
SyncServer[1546]
[0x7fd5b8c1ba20] |Logging|Info| Logging initialized, engine version 713.1 : log level 3
2013-12-08 10:55:20,000
kernel[0]
nspace-handler-set-snapshot-time: 1386496522
2013-12-08 10:55:28,146
com.apple.backupd[1527]
Attempting to mount network destination URL: afp://Peter%20K%C3%A4llviks;[email protected]/Data
2013-12-08 10:55:29,000
kernel[0]
AppleSRP started.
2013-12-08 10:55:31,000
kernel[0]
MacAuthEvent en1   Auth result for: 28:cf:da:b4:ff:1c MAC AUTH succeeded
2013-12-08 10:55:31,000
kernel[0]
wlEvent: en1 en1 Link UP virtIf = 0
2013-12-08 10:55:31,000
kernel[0]
AirPort: RSN handshake complete on en1
2013-12-08 10:55:31,000
kernel[0]
wl0: Roamed or switched channel, reason #8, bssid 28:cf:da:b4:ff:1c
2013-12-08 10:55:31,000
kernel[0]
en1: BSSID changed to 28:cf:da:b4:ff:1c
2013-12-08 10:55:31,000
kernel[0]
en1::IO80211Interface::postMessage bssid changed
2013-12-08 10:55:32,390
coreaudiod[303]
Disabled automatic stack shots because audio IO is active
2013-12-08 10:55:33,190
coreaudiod[303]
Enabled automatic stack shots because audio IO is inactive
2013-12-08 10:55:37,000
kernel[0]
AFP_VFS afpfs_mount: /Volumes/Data, pid 1555
2013-12-08 10:55:37,000
kernel[0]
AFP_VFS afpfs_mount : succeeded on volume 0xffffff81ca5f6008 /Volumes/Data (error = 0, retval = 0)
2013-12-08 10:55:37,699
com.apple.backupd[1527]
Mounted network destination at mount point: /Volumes/Data using URL: afp://Peter%20K%C3%A4llviks;[email protected]/Data
2013-12-08 10:55:37,707
com.apple.backupd-helper[1569]
Not starting scheduled Time Machine backup - computer is on battery power.
2013-12-08 10:55:41,999
com.apple.backupd[1527]
Renaming /Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle to /Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle
2013-12-08 10:55:42,055
com.apple.backupd[1527]
Failed to move /Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle to file://localhost/Volumes/Data/Peter%20K%C3%A4llvikss%20MacBook%20Pro.sparsebund le/ error Error Domain=NSCocoaErrorDomain Code=516 "“Peter Källvikss MacBook Pro” couldn’t be moved to “Data” because an item with the same name already exists." UserInfo=0x7fc1e9615d00 {NSSourceFilePathErrorKey=/Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle, NSUserStringVariant=(
    Move
), NSDestinationFilePath=/Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle, NSFilePath=/Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle, NSUnderlyingError=0x7fc1e9615ba0 "The operation couldn’t be completed. File exists"}
2013-12-08 10:55:49,830
Safari[1581]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
2013-12-08 10:55:49,830
Safari[1581]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
2013-12-08 10:55:49,831
Safari[1581]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
2013-12-08 10:55:49,831
Safari[1581]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
2013-12-08 10:55:49,831
Safari[1581]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
2013-12-08 10:56:24,090
com.apple.backupd-helper[1630]
Not starting scheduled Time Machine backup - computer is on battery power.
2013-12-08 10:56:25,070
com.apple.backupd[1527]
Disk image /Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine-säkerhetskopior
2013-12-08 10:56:25,074
com.apple.backupd[1527]
Backing up to: /Volumes/Time Machine-säkerhetskopior/Backups.backupdb
2013-12-08 10:56:46,755
com.apple.backupd[1527]
Using file event preflight for Macintosh HD
2013-12-08 10:56:50,318
sandboxd[1646]
([1457]) mdworker(1457) deny file-read-xattr /Users/peterkallviks/Library/Cookies/Cookies.binarycookies (pre-plugin fstype:hfs fsflag:480D000 flags:240000005E diag:0 uti:dyn.ah62d4rv4ge80k2py plugin:internalPlainTextImporter - find suspect file using: sudo mdutil -t 4203029)
2013-12-08 10:56:50,000
kernel[0]
Sandbox: sandboxd(1646) deny mach-lookup com.apple.coresymbolicationd
2013-12-08 10:57:06,457
com.apple.backupd[1527]
Will copy (79.2 MB) from Macintosh HD
2013-12-08 10:57:06,473
com.apple.backupd[1527]
Found 521 files (79.2 MB) needing backup
2013-12-08 10:57:06,512
com.apple.backupd[1527]
3.58 GB required (including padding), 1.26 TB available
2013-12-08 10:57:30,880
SyncServer[1546]
[0x7fd5b8c1ba20] |Server|Info| Cancelling all sync plans.
2013-12-08 10:57:44,638
SyncServer[1546]
[0x7fd5b8c1ba20] |Server|Info| Goodnight, Gracie.
2013-12-08 11:01:48,525
com.apple.backupd[1527]
Copied 7217 files (85.8 MB) from volume Macintosh HD.
2013-12-08 11:01:49,321
com.apple.backupd[1527]
Using file event preflight for Macintosh HD
2013-12-08 11:01:49,341
com.apple.backupd[1527]
Will copy (1.9 MB) from Macintosh HD
2013-12-08 11:01:49,344
com.apple.backupd[1527]
Found 56 files (1.9 MB) needing backup
2013-12-08 11:01:49,344
com.apple.backupd[1527]
3.49 GB required (including padding), 1.26 TB available
2013-12-08 11:02:10,205
com.apple.backupd[1527]
Copied 1962 files (1.9 MB) from volume Macintosh HD.
2013-12-08 11:02:12,277
com.apple.backupd[1527]
Created new backup: 2013-12-08-110210
2013-12-08 11:02:18,413
com.apple.backupd[1527]
Starting post-backup thinning
2013-12-08 11:02:18,413
com.apple.backupd[1527]
No post-back up thinning needed: no expired backups exist
2013-12-08 11:02:19,893
com.apple.backupd[1527]
Backup completed successfully.
2013-12-08 11:02:29,234
com.apple.backupd[1527]
Ejected Time Machine disk image: /Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle
2013-12-08 11:02:29,000
kernel[0]
AFP_VFS afpfs_unmount: /Volumes/Data, flags 0, pid 1851
2013-12-08 11:02:29,852
com.apple.backupd[1527]
Ejected Time Machine network volume.
2013-12-08 11:02:30,000
kernel[0]
AFP_VFS afpfs_unmount : We are the last mnt/sbmnt using volume /Volumes/Data 0xffffff81ca5f6008
2013-12-08 11:02:30,000
kernel[0]
AFP_VFS afpfs_unmount : We are the last volume using socket /Volumes/Data 0xffffff81ca5f6008
2013-12-08 11:02:30,000
kernel[0]
AFP_VFS afpfs_unmount : afpfs_DoReconnect sent signal for unmount to proceed
2013-12-08 11:03:31,941
sandboxd[1886]
([1856]) mdworker(1856) deny file-read-xattr /Users/peterkallviks/Library/Cookies/Cookies.binarycookies (pre-plugin fstype:hfs fsflag:480D000 flags:240000005E diag:0 uti:dyn.ah62d4rv4ge80k2py plugin:internalPlainTextImporter - find suspect file using: sudo mdutil -t 4203267)
2013-12-08 11:03:31,000
kernel[0]
Sandbox: sandboxd(1886) deny mach-lookup com.apple.coresymbolicationd
2013-12-08 11:05:11,606
CVMServer[236]
Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
2013-12-08 11:05:11,663
CVMServer[236]
Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
2013-12-08 11:06:21,653
com.apple.time[288]
Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2013-12-08 11:10:48,282
coreaudiod[303]
Disabled automatic stack shots because audio IO is active
2013-12-08 11:10:49,412
coreaudiod[303]
Enabled automatic stack shots because audio IO is inactive
2013-12-08 11:12:58,542
Mail[1524]
-[ABMailRecent valueForProperty:socialProfiles] - unknown property. This warning will be displayed only once per unknown property, per session.
2013-12-08 11:16:05,738
com.apple.backupd-helper[2289]
Not starting scheduled Time Machine backup - computer is on battery power.
2013-12-08 11:17:35,000
kernel[0]
disk0s2: I/O error.
2013-12-08 11:18:26,000
kernel[0]
disk0s2: I/O error.
2013-12-08 11:19:06,000
kernel[0]
CODE SIGNING: cs_invalid_page(0x1000): p=2394[GoogleSoftwareUp] clearing CS_VALID
2013-12-08 11:19:59,000
kernel[0]
nspace-handler-update: did not find token 1297
2013-12-08 11:20:00,000
kernel[0]
nspace-handler-update: did not find token 1298
2013-12-08 11:20:00,000
kernel[0]
disk0s2: I/O error.
2013-12-08 11:20:01,000
kernel[0]
nspace-handler-unblock: did not find token 1297
2013-12-08 11:20:01,000
kernel[0]
nspace-handler-unblock: did not find token 1298
2013-12-08 11:20:19,471
coreaudiod[303]
Disabled automatic stack shots because audio IO is active
2013-12-08 11:20:20,153
coreaudiod[303]
Enabled automatic stack shots because audio IO is inactive
2013-12-08 11:31:29,000
kernel[0]
disk0s2: I/O error.
2013-12-08 11:32:40,000
kernel[0]
disk0s2: I/O error.
2013-12-08 11:36:28,170
CVMServer[236]
Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
2013-12-08 11:36:28,225
CVMServer[236]
Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
2013-12-08 12:10:31,000
bootlog[0]
BOOT_TIME 1386501031 0
2013-12-08 12:10:52,000
kernel[0]
PMAP: PCID enabled
2013-12-08 12:10:52,000
kernel[0]
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
2013-12-08 12:10:52,000
kernel[0]
vm_page_bootstrap: 4031295 free pages and 130241 wired pages
2013-12-08 12:10:52,000
kernel[0]
kext submap [0xffffff7f80742000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000742000]
2013-12-08 12:10:52,000
kernel[0]
zone leak detection enabled
2013-12-08 12:10:52,000
kernel[0]
standard timeslicing quantum is 10000 us
2013-12-08 12:10:52,000
kernel[0]
standard background quantum is 2500 us
2013-12-08 12:10:52,000
kernel[0]
mig_table_max_displ = 74
2013-12-08 12:10:52,000
kernel[0]
TSC Deadline Timer supported and enabled
2013-12-08 12:10:52,000
kernel[0]
corecrypto kext started!
2013-12-08 12:10:52,000
kernel[0]
Running kernel space in FIPS MODE
2013-12-08 12:10:52,000
kernel[0]
Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
2013-12-08 12:10:52,000
kernel[0]
Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS integrity POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS AES CBC POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS TDES CBC POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS AES ECB AESNI POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS AES XTS AESNI POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS SHA POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS HMAC POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS ECDSA POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS DRBG POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS POST passed!
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
2013-12-08 12:10:52,000
kernel[0]
calling mpo_policy_init for TMSafetyNet
2013-12-08 12:10:52,000
kernel[0]
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
2013-12-08 12:10:52,000
kernel[0]
calling mpo_policy_init for Sandbox
2013-12-08 12:10:52,000
kernel[0]
Security policy loaded: Seatbelt sandbox policy (Sandbox)
2013-12-08 12:10:52,000
kernel[0]
calling mpo_policy_init for Quarantine
2013-12-08 12:10:52,000
kernel[0]
Security policy loaded: Quarantine policy (Quarantine)
2013-12-08 12:10:52,000
kernel[0]
Copyright (c) 1982, 1986, 1989, 1991, 1993
2013-12-08 12:10:52,000
kernel[0]
The Regents of the University of California. All rights reserved.
2013-12-08 12:10:52,000
kernel[0]
MAC Framework successfully initialized
2013-12-08 12:10:52,000
kernel[0]
using 16384 buffer headers and 10240 cluster IO buffer headers
2013-12-08 12:10:52,000
kernel[0]
IOAPIC: Version 0x20 Vectors 64:87
2013-12-08 12:10:52,000
kernel[0]
ACPI: sleep states S3 S4 S5
2013-12-08 12:10:52,000
kernel[0]
AppleIntelCPUPowerManagement: Turbo Ratios 88AB
2013-12-08 12:10:52,000
kernel[0]
AppleIntelCPUPowerManagement: (built 13:50:43 Sep 29 2013) initialization complete
2013-12-08 12:10:52,000
kernel[0]
pci build Sep 29 2013 13:35:16, flags 0x23008, pfm64 (36 cpu) 0xf80000000, 0x80000000
2013-12-08 12:10:52,000
kernel[0]
[ PCI configuration begin ]
2013-12-08 12:10:52,000
kernel[0]
Sleep failure code 0x00000000 0x28006500
2013-12-08 12:10:52,000
kernel[0]
console relocated to 0xf80010000
2013-12-08 12:10:52,000
kernel[0]
[ PCI configuration end, bridges 13, devices 17 ]
2013-12-08 12:10:52,000
kernel[0]
mbinit: done [128 MB total pool size, (85/42) split]
2013-12-08 12:10:52,000
kernel[0]
Pthread support ABORTS when sync kernel primitives misused
2013-12-08 12:10:52,000
kernel[0]
rooting via boot-uuid from /chosen: 5396423A-0B8F-3005-B02A-A61F078A4856
2013-12-08 12:10:52,000
kernel[0]
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResou

The following entry may indicate a failing harddrive, so doing backups and replacing the harddrive may be in order.
Disk Information:
          TOSHIBA MK7559GSXF disk0 : (750,16 GB)
          S.M.A.R.T. Status: Failing                                  <-----------
A little bit about drive S.M.A.R.T. status:
"The most basic information that SMART provides is the SMART status. It provides only two values: "threshold not exceeded" and "threshold exceeded". Often these are represented as "drive OK" or "drive fail" respectively. A "threshold exceeded" value is intended to indicate that there is a relatively high probability that the drive will not be able to honor its specification in the future: that is, the drive is "about to fail". The predicted failure may be catastrophic or may be something as subtle as the inability to write to certain sectors, or perhaps slower performance than the manufacturer's declared minimum."
http://en.wikipedia.org/wiki/S.M.A.R.T.

Recently upgraded from Firefox 3.6.13 to Firefox 13 - freezes when trying to open

I've been using firefox 3.6.13 for some time now; the reason I have such an older version is because it's for a work computer, and an upgrade to newer versions generally isn't seamless and can interrupt the process of work.
Any way, I find some down time and decided that I'd upgrade to the latest version of firefox. Every thing seemed to install fine, and it copied over all of my addons apparently (which I'm grateful for). How ever, when opening up Firefox it opens and displays two tabs saying "connecting", but nothing happens beyond that. It just freezes completely providing the "waiting" icon when hovering over it. I tried waiting 10+ minutes for what ever process was holding up to complete, but nothing happened. In order to close out of firefox I need to kill the process in task manager.
I've tried uninstalling and reinstalling, but the same issue occurs. I tried looking for previous, more stable, versions of firefox but couldn't find any thing.

Problems with Flash content can be caused by a recent Flash 11.3 update.
See:
*https://support.mozilla.org/kb/keep-flash-up-to-date-and-troubleshoot-problems
*https://support.mozilla.org/kb/flash-crashes-or-does-not-load-firefox-13
*http://forums.adobe.com/thread/1018071?tstart=0
*http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html

Power Mac G5 PPC Screen Freeze Turbo Fan Issue

Hello...
I've read most, if not all of the related posts; however, I have not seen any definitive answer to this issue.
My, almost mint condition, Power Mac G5 PPC has recently started the screen freeze, turbo fan, won't boot issue that seems to be prevalent with these models. I've tried almost all of the suggested troubleshooting fixes and have had no luck. My most recent attempt was to try and start in single-user mode (holding SHIFT + S at startup) and I received the following error screen then turbo fans: http://www.thishateofmine.com/Assets/photos/appleCPUpower.jpg
Remember...this is a PPC, so why am I getting an error referencing Intel CPU Power Management? This leads me to believe the OSX 10.5.8 I've been running has installed system resources for non-existent CPU's and is causing a conflict. This would be a major coding error on Apple's behalf, would it not?
I never had this issue when running any previous OS version and this computer had been running spectacularly.
It has only been used in my clean, smoke-free, home recording studio and if it werent' for a few blemishes left by external HDD's, this computer could pass as brand new. There is very little internal dust and I have kept it clean with electronics approved compressed air. I have not removed anything to get at the PSU area for cleaning, though.
If I could get it to boot from the original DVD's and install up from Panther, I would. Based on the error message I'm receiving, I do not believe this is a logic board, RAM, CPU, etc... issue. The computer will boot into open firmware and function fine, but not the OS; therefore, this would be an OS problem, right? Is that not a logical mental path?
This HAS to be a known issue and have a resolve that is NOT logic board and/or CPU replacement related.
Any help would be greatly appreciated.
BTW...please read this as a positive communication from a frustrated (knowledgeable enough to be dangerous) user. I just want my G5 back.

After plugging in the G5 PPC, as it had been unplugged for several days, here are last night’s efforts:
With only the original, main Hitachi Deckstar 400GB HDD in slot 1, I attempted to boot normal, boot holding SHIFT + COMMAND + V, boot holding COMMAND + S and boot to the original install DVD, all with no joy. In my original post I incorrectly stated I was attempting to boot into single-user mode by holding SHIFT + S, which resulted in the screen displaying the OP’s linked image. In attempting to boot into (actual) single-user mode and verbose mode, I get two different text messages – and have taken screen photos, but have not been able to upload yet – both of which stop with “DART enabled” and then do nothing else with no cursor capability, only to result in turbo fans and having to hold the power button down to shut down.
Next I ran (again) the Apple Hardware Test from the original install DVD and everything passed.
Feeling confident the hardware is all in working order, I used my brother’s Macbook Pro 3.1 (OS v10.6.8) as the host to mount the G5 PPC in target disk mode. The PPC’s HDD mounts up with no issues and everything is accessible, so I shut down and swapped the original HDD with a 500GB Western Digital Caviar SE16 that did not have an OS on it, restarted to AHT DVD and ran test again with everything passing.
Now I reconnected the target disk mode setup, formatted the PPC’s WD HDD and installed Leopard on it while in TDM from the MBP3.1. Everything installed, restarted will still TDM connected, MBP3.1 started up with the PPC’s HDD as the startup disk, went through all the typical initial install information and registration and voila I’m back in target disk mode with the PPC’s HDD as my boot disk and MBP3.1’s HDD on the desktop. Everything’s accessible, functions and looks good.
Keeping in mind I’m only dangerously knowledgeable regarding computers, I’m thinking I should be able to shut everything down and now boot the G5 PPC from the internal WD HDD I just installed the OS on, right? Wrong. All I get is the infamous folder with a flashing question mark.
Help!!! (…please???)
BTW…as it has been mentioned in a few posts, but is one thing I have not done yet, I thought it worth mentioning. I have not replaced the internal battery, but the last time I was able to get the computer to boot to the internal HDD and run for a short period of time, after being unplugged for several days, I did have to re-enter time, date, location, etc… info. The actual last time I got it to boot, I did not do this, as it only got as far as loading the desktop before freezing, but the time was correct. Didn’t get a chance to check date and location, as it froze almost instantaneously.

Liner Asset Management Implementation for Railway and Road Network.

Hi EAM Experts,
My client currently is using SAP modules including SAP PM but now for better asset management they want to implement LAM.
Please do guide me how to implement the LAM. Please specify with the config settings and the business cycle so that it will be helpful for me in mapping
the business requirement.
Your help required asap. Screen shots will be highly thankful.
This requirement is with my mutiple clients who is into Road and Railway networks.
Thanks
Anil

Didier,
>So my question is what should we do to get the most accurate data for our
>asset and inventory in the case were deep freeze is running and reseting
>the system at every reboot....could you suggest a processs to make it more
>accurate.
Duplicate.
This post has been answered in the Asset Inventory Forum.
Jared Jennings - Data Technique, Inc.
Novell Support Forums Sysop
My Blog and Wiki with Tips, Tricks, and Tutorials
http://jaredjennings.org

Chapter Problem with Multiple Timeline Assets

Using Premiere Pro 2.0 and DV assets exported from Premiere.
Normally I just create a single export out of Premiere and all works well. This time I decided to try a different workflow, taking advantage of Encore's ability to add multiple assets to the same timeline. This way, I figured, if any changes are needed, only one part will have to be reexported and retranscoded, instead of the whole thing.
So the first asset places in the timeline OK. The second asset generates a warning message, asking me if I want to "replace existing chapters with source marker in the asset".
Now first of all, there are no existing chapters in the section of timeline where the new asset is being added, so I don't know why it's asking if I want to replace them. But that's a minor annoyance. The real problem is that all the chapter markers in the second asset, whether I click Yes or Cancel in response to the warning, end up squished towards the beginning of the second asset. The first chapter marker is correct, and all chapter markers thereafter are redistributed 12 frames apart from there. I only noticed this when I expanded the timeline view.
I thought maybe I had exported from Premiere incorrectly, but if I remove the first asset and place the second asset in the timeline first, the chapters appear where they should. It seems that any asset after the first exhibits this squished marker syndrome, and I don't have a clue why, or how to fix it.
Anyone have any ideas here?

OK, I just tried replacing the middle timeline clip here. Logistically, it works.
Here's what I did.
1. New project. Add 3 pre-transcoded elementary mpeg and ac3 streams to the timeline.
2. Check project.
3. Fix the reported error about gaps between clips. Unfortunately, I had to move the 3rd clip 12 frames away from the 2nd clip. This will introduce a 12-frame gap between clips. I did not try to build with the error uncorrected. NB: There was no gap error concerning the boundary between clips 1 and 2, so I expect the problem is clip specific.
4. Build a disc image. All of the audio was ac3, and with the different audio clip lengths (all less than 1/2 second difference), Encore re-transcoded the audio, and only the audio. My suggestion here is to use .wav files only.
5. Use File>Replace Asset to replace the middle clip audio and video streams with new, shorter ones.
6. Trim out the danger stripes in the timeline and butt the video and audio of the 3rd clip perfectly up against the end of the middle clip.
7. Check project. No gap error this time.
8. Build disc image.
I mounted each image in turn and played them in WinDVD. They played as expected. I cannot speak to how truly seamless the playback is because all of the clips I have for testing fade to black at the end. But WinDVD did not hesitate when going from clip to clip and there were no freeze frames that I could see.
So upgrading to CS3 will let you do what you want. It may be a perfect solution, and it may not, but it is certain to be better than what you get from En 1.5 going from timeline to timeline.

Freezing of an asset

Similar Messages

Maybe you are looking for