Freezing of Picture/Tech Service Failed To Show Up On 3 Separate Repair Calls
Have had U-verse TV over one year without problems. Four days ago, picture freezing started with wireless receiver only. Wired receiver in other location works fine. Did all troubleshooting procedures, ie.reboots, etc. as recommended to no avail. Service calls were scheduled through tech support. On 6/29/2015 during 830-1230 interval: No show. Then later that same day from 4-8 interval: No show. Then today 7/1/2015 during 4-8 interval: No show. I have spent a total of 12 hours waiting for a tech service person to arrive at my home without success. I used chat and called ATT U-verse Direct Support who offered to have someone call next day as a "reach out" to me. I told them to solve my problem by having someone show up to do the repair. Does anyone have any recommendations for me in order to break this cycle of scheduled repair calls where no one shows up? Thank you.
Hi ,
I am so sorry about the issues you are having with your TV service and the multiple missed appointments. I will be happy to make sure this gets resolved, and I will be sending you a private message to work with you further on this.
-ATTU-verseCare
Similar Messages
-
Picture services failed to load - An unexpected error occurred
Just uninstalled Desktop 5.0 and installed Desktop 6.0.
Everything else seems to be working fine. It's just that when I try to access "Media Sync-->Pictures". I get the following message:
"Picture services failed to load - An unexpected error occurred"
I especially need to access my pics b/c my media card is out of room.(perhaps itself a clue?)
I have a Curve 8350i from Nextel/Sprint
I would happily post the "log" entry, but I don't know how to find it and/or turn logging on.
Please help.
Gerard MarraThis is a portion of the Desktop Log. It is strange because the Blackberry Desktop Software 6.0 works fine on my laptop but not on my desktop computer....
14:48:30.075|INFO |9|Rim.Desktop.Media|0|TASK: [Load_Picture_Library], STATE: Failed, TRANSITION: none, OPERATION: none, DURATION: 5304
14:48:30.079|ERROR|9|Rim.Desktop.Media|18005|EXCEPTION: Rim.Desktop.Services.Tasks.Exceptions.TaskFailedException -- MESSAGE: Load_Picture_Library -- STACK: at Rim.Desktop.Services.Tasks.Task.get_Result(){CRLF} at Rim.Media.Source.Pictures.PictureDataSource.GetLibraryResultFromTask(Task task){CRLF} at Rim.Media.Source.Pictures.PictureDataSource.LoadLibraryUsingTask(){CRLF} at Rim.Media.Source.Pictures.PictureDataSource.LoadOriginalDataSource(){CRLF} at Rim.Media.Source.DataSource.LoadDataSource(IDataSourceSnapshot snapshot){CRLF} at Rim.Media.Sync.BBMusicSyncAPI.<>c__DisplayClass12.<GetLoadDataSourceTask>b__e(){CRLF} at Rim.Desktop.Services.Tasks.Task.RunOneOperation()
14:48:30.079|ERROR|9|Rim.Desktop.Media|18005|INNER EXCEPTION: System.IO.IOException -- MESSAGE: The device is not ready.{CRLF} -- STACK: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath){CRLF} at System.IO.__Error.WinIODriveError(String driveName, Int32 errorCode){CRLF} at System.IO.DriveInfo.get_VolumeLabel(){CRLF} at Rim.Media.Source.Pictures.PictureList.GetFriendlyName(IFolderPath path){CRLF} at Rim.Media.Source.Pictures.PictureList..ctor(IPictureLibrary owner, ILibraryFolder folderPath){CRLF} at Rim.Media.Source.Pictures.PictureLibrary.GetLibrary(IFolderLibrarySession folderLibrarySessionData, ICancelable task){CRLF} at Rim.Media.Source.Pictures.PictureDataSourceLoader.LoadLibrary(ICancelable task){CRLF} at Rim.Media.Source.Pictures.PictureDataSource.<>c__DisplayClass1.<LoadLibraryUsingTask>b__0(){CRLF} at Rim.Desktop.Services.Tasks.Task.RunOneOperation()
14:48:30.079|ERROR|9|Rim.Desktop.Media|18005|EXCEPTION: Rim.Desktop.Services.Tasks.Exceptions.TaskFailedException -- MESSAGE: Load_Picture_Library -- STACK: at Rim.Desktop.Services.Tasks.Task.get_Result(){CRLF} at Rim.Media.Source.Pictures.PictureDataSource.GetLibraryResultFromTask(Task task){CRLF} at Rim.Media.Source.Pictures.PictureDataSource.LoadLibraryUsingTask(){CRLF} at Rim.Media.Source.Pictures.PictureDataSource.LoadOriginalDataSource(){CRLF} at Rim.Media.Source.DataSource.LoadDataSource(IDataSourceSnapshot snapshot){CRLF} at Rim.Media.Sync.BBMusicSyncAPI.<>c__DisplayClass12.<GetLoadDataSourceTask>b__e(){CRLF} at Rim.Desktop.Services.Tasks.Task.RunOneOperation()
14:48:30.080|ERROR|9|Rim.Desktop.Media|18005|INNER EXCEPTION: System.IO.IOException -- MESSAGE: The device is not ready.{CRLF} -- STACK: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath){CRLF} at System.IO.__Error.WinIODriveError(String driveName, Int32 errorCode){CRLF} at System.IO.DriveInfo.get_VolumeLabel(){CRLF} at Rim.Media.Source.Pictures.PictureList.GetFriendlyName(IFolderPath path){CRLF} at Rim.Media.Source.Pictures.PictureList..ctor(IPictureLibrary owner, ILibraryFolder folderPath){CRLF} at Rim.Media.Source.Pictures.PictureLibrary.GetLibrary(IFolderLibrarySession folderLibrarySessionData, ICancelable task){CRLF} at Rim.Media.Source.Pictures.PictureDataSourceLoader.LoadLibrary(ICancelable task){CRLF} at Rim.Media.Source.Pictures.PictureDataSource.<>c__DisplayClass1.<LoadLibraryUsingTask>b__0(){CRLF} at Rim.Desktop.Services.Tasks.Task.RunOneOperation()
14:48:30.080|INFO |9|Rim.Desktop.Media|0|TASK: [API_LOAD_DATASOURCE_PicturesDesktop], STATE: Progressing, TRANSITION: Progressing -> Finishing, OPERATION: Void <GetLoadDataSourceTask>b__e(), ERROR: Rim.Desktop.Services.Tasks.Exceptions.TaskFailedException: Load_Picture_Library ---> System.IO.IOException: The device is not ready.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.__Error.WinIODriveError(String driveName, Int32 errorCode)
at System.IO.DriveInfo.get_VolumeLabel()
at Rim.Media.Source.Pictures.PictureList.GetFriendlyName(IFolderPath path)
at Rim.Media.Source.Pictures.PictureList..ctor(IPictureLibrary owner, ILibraryFolder folderPath)
at Rim.Media.Source.Pictures.PictureLibrary.GetLibrary(IFolderLibrarySession folderLibrarySessionData, ICancelable task)
at Rim.Media.Source.Pictures.PictureDataSourceLoader.LoadLibrary(ICancelable task)
at Rim.Media.Source.Pictures.PictureDataSource.<>c__DisplayClass1.<LoadLibraryUsingTask>b__0()
at Rim.Desktop.Services.Tasks.Task.RunOneOperation()
--- End of inner exception stack trace ---
at Rim.Media.Sync.BBMusicSyncAPI.DataSourceFailedToLoad(Exception exception)
at Rim.Desktop.Services.Tasks.Task.RunOneOperation()
at Rim.Desktop.Services.Tasks.Task.Run()
at Rim.Media.Sync.BBMusicSyncAPI.LoadDataSource(MediaSource mediaSource, ICancelable parentTask)
at Rim.Media.Sync.SyncService.<>c__DisplayClasse.<StartUp>b__a()
at Rim.Desktop.Services.Tasks.Task.RunOneOperation() -
First time poster, but I think I've done my homework on this issue.
This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
However, it is definitely not the same issue (see further).
Current Config:
HP dv7-1450.
W7 RC 7100 x64
Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
Running with Admin account while diagnosing/troubleshooting.
Currently have two working accounts, one standard, one admin.
Symptom:
New user accounts cannot be logged into. On an attempted login to the new account, the following information is displayed on the login screen: "The User Profile Service service failed the logon. User profile cannot be loaded." Windows then logs off the operator and returns to the initial user selection screen. All other aspects of use are normal.
Current Diagnostics:
First attempts to resolve this problem were to recreate the new account. This was attempted when logged in as both Standard and Admin. This was also attempted under safe mode. This has been attempted with virus protection disabled. All to no difference in the symptom.
The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link). Unlike that issue, there simply is no entry for the new user. Examination of the new log entries from creation of account to attempted log in provides the following entries:
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Naturally I started with the earliest error first, and decided to look to see what is going on. The file that is trying to be copied is there, but the destination folder does not exist. As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation. Specifically I suspect it may not be able to create the appropriate folders before performing the copy. Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs. Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile). The following two (unhelpful to me) log entries were generated.
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The message id for the desired message could not be found
Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated. I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
There's the info. I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log. I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
Thanks in advance to responders!First time poster, but I think I've done my homework on this issue.
This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
However, it is definitely not the same issue (see further).
Current Config:
HP dv7-1450.
W7 RC 7100 x64
Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
Running with Admin account while diagnosing/troubleshooting.
Currently have two working accounts, one standard, one admin.
Symptom:
New user accounts cannot be logged into. On an attempted login to the new account, the following information is displayed on the login screen: "The User Profile Service service failed the logon. User profile cannot be loaded." Windows then logs off the operator and returns to the initial user selection screen. All other aspects of use are normal.
Current Diagnostics:
First attempts to resolve this problem were to recreate the new account. This was attempted when logged in as both Standard and Admin. This was also attempted under safe mode. This has been attempted with virus protection disabled. All to no difference in the symptom.
The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link). Unlike that issue, there simply is no entry for the new user. Examination of the new log entries from creation of account to attempted log in provides the following entries:
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Naturally I started with the earliest error first, and decided to look to see what is going on. The file that is trying to be copied is there, but the destination folder does not exist. As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation. Specifically I suspect it may not be able to create the appropriate folders before performing the copy. Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs. Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile). The following two (unhelpful to me) log entries were generated.
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The message id for the desired message could not be found
Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated. I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
There's the info. I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log. I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
Thanks in advance to responders!
To resolve this issue, I suggst you delete the file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm.Arthur Xie - MSFT -
User profile service service failed the logon?
Every time I try to logon to my user account in windows vista home premium, it says :The User Profile Service service Has failed the logon. The User Profile Cannot Be Loaded." The Rest of the accounts on my computer still work fine. But New User Accounts say the same thing. System restore didn't even fix it when i restored back as far as possible. I've scanned for viruses with all security programs that I have, along with system diagnostics, etc. and still nothing. it still did it even after I moved all my files to another user's folder and deleted my account. I didn't change anything or add or delete anything before it stopped working. When i go to " user profiles" in "System properties" it showed my profile was a backup and unknown profile size. after I deleted my account, it didn't show my profile at all.
Posts 1
Windows Vista Home Premium failed logon
Hi, I have a Dell Inspiron 1720, about 4 weeks old, O S Windows Visa home premium.
On switching on, my profile picture appears and requests the pass word, on entering the password the following message appears "The user profile service failed logon.User profile cannot be loaded"
I have searched forums for assistance, but some say to press F8 on boot up I only have an F2 or F12 option on my Inspiron. also I only have one profile on the laptop as some are suggesting log on via guest profile and change settings, but i am unable to do this as i have no guest profile set up. Please help! -
Sync problem on iPhone4 IOS5 and iTunes 10.5: Sync service failed to start
After painful upgrade to IOS 5.0 on my iPone 4 which suffer from er 3014 unt I do full restore in other computer. Now two new problems cropped up again:
A.
When I sync IPhone with iTunes, the sync process started and freeze at "waing f sync service to start" and for 5 minutes or so, it end up with a dialog stated that the iPhone could not be synced because sync service failed to start
To remedy, I have to click t start Sync again, and thios time, it will be completed.
To solve tjhis, I have done the following, and the probelm still persist:
a. Reinstal,l to repair iTunes
b. Delete the Lockup folder
c. Reset sync history
d. reboot iPhone
All cannot solve the problem. Help please, how to solve this problem?
Also, when I backup my iPhone, it freeze at "Backing up iPhone" fr about 10-15 minutes, then start backup, until nearly finished, then it restart backup process again by itself, and again, freezing at "Backing up iPhone" for another 5 minutes, then it start backup and complete. I check the backup time in Preferences, it's correct.
To solve this, I delete the backup, and start new backup, the process went OK. But when I start backup again, the above symptom (backing up, and restart backup again to complete) persist
I have quite a rough experiences with iTunes-iPhone-iPad sync and backup all the times. Can the sync and backup process mad better and real trouble free Apple?
Help and suggestion please. I sync iPhone and iPad2 with WIndow XP PC. iPad2 do not have problem. The problem is with iPhone4 IOS 5 32 GB (less than 2 GB free space on iPhone remains)I have very similar problems with my brand new iPhone and iTunes. iTunes is virtually unusable even after multiple installs, uniinstalls, and reinstalls. Sync fails silently. Drop-down menus won't stay visible long enough to click any options. Phone-support blames it on the fact that I use Windows XP however the iTunes page says right there: "iTunes 10.5 for Windows XP, Vista or Windows 7". The only program I have problems with is iTunes.
He said I have to revert to iOS 4 but he also said he thought that was impossible. What does the OS on my phone have to do with the behavior of iTunes running on my computer? iTunes crashed and had failures both before and after I updated to iOS 5. Typical bad tech support just like every other company. I thought Apple was different. Apple really stepped in it this time and it stinks. I've seen a huge number of new problem reports here and elsewhere. -
Job for httpd.service failed. See 'systemctl status httpd.service' and
Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one. -
im on firefox 4 ,recently ,i tried new addon for firefox 4 called start up faster, i removed it, just as comparison to see boot up times , and then when i tried to install again i get the message create service failed, the icon stays on my desktop, want to check this addon is still performing its role, or could i fix something to make sure its properly on my addon list, thank you,
Is it still showing up in your ad-on manager?
-
Installation issue : sql server 2008 r2 some services failed to installed on windows 7
I have been facing this problem while installing sql server 2008 r2.. i tried so many times but same result .. it shows sql server installed with some errors
database engine service : failed
SQL Server Replication : failed
Full-Text Search : failed
Analysis Services : failed
Reporting Services : failed
And my Log file (or) summary file is (it is in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log):
Overall summary:
Final result: User cancelled
Exit code (Decimal): -2068380094
Exit facility code: 1207
Exit error code: 1602
Exit message: User has cancelled.
Start time: 2014-08-14 21:15:26
End time: 2014-08-14 21:23:58
Requested action: AddNode
Machine Properties:
Machine name: MANJU-PC
Machine processor count: 4
OS version: Windows Vista
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services
1033 10.0.1600.22
No
Sql Server 2008
Management Tools - Basic 1033 Developer Edition
10.0.1600.22 No
Sql Server 2008
Management Tools - Complete 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Developer Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Developer Edition
10.0.1600.22 No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: AddNode
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
CONFIGURATIONFILE:
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERNETWORKNAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
MEDIASOURCE: D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\
PID: *****
QUIET: False
QUIETSIMPLE: False
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: *****
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\ConfigurationFile.ini
Detailed results:
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CancelException
Message:
User has cancelled.
Stack:
at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.SubmitAndWait(Request request)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceService.Waypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)Requested action: AddNode
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services
1033 10.0.1600.22
No
Sql Server 2008
Management Tools - Basic 1033 Developer Edition
10.0.1600.22 No
Sql Server 2008
Management Tools - Complete 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Developer Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Developer Edition
10.0.1600.22 No
Instead of installing SQL server instance you selected add node which is to be selected when SQL server installation is to be made on Node which is being added to cluster. Since your OS is not clustered I am sure you selected worng option.
Please right click on setup file and select run as administrator. Now installation window which pops up on that on left hand side select
installation and then on page that appears select 'New server standalone installation or add feature to existing installation'.
You already have SQL server 2008 installed on your machine as per feature discovery report
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Group Policy Client service failed! Help!
A few days ago I was booted out of my account, while watching a DVD. My system restarted itself, but not before flashing some sort of blue screen. Unfortunately I was unable to read the content of it. After restarting, I was presented with a light blue login screen, instead of my normal screen. However, my name and profile picture remained the same. I was able to login with my password, only to be informed that I had been set up with a temporary account. I was unable to access my files, and had no idea how to access my regular account. After logging out, and restarting in hopes that it would go back to normal... my system went into recovery mode, and afterwards presented me with the same temporary account login screen. Only this time, I was unable to login. Instead I received "The Group Policy Client service failed the logon. Access denied" message. I'm the only user (administrative), and my computer has no internet connection. So, I'm not sure if this is a simple error; a result from my low capacity battery needing to be replaced, or a virus. I've checked previous forums, but I've had no luck. I can't login to my computer at all, and it's very frustrating. I've also backed up my files, just in case my system has to be restored to its factory settings (I hope not). Could any one tell me how to resolve this? Please!
- Frustrated (Pavilion dv6-1350us) UserHello @chigi93 ,
Welcome to the HP Forums!
I understand you were booted from your account and can now only log in with a temporary account.
Windows does this when the main account is unavailable. The account most likely needs to be repaired.
Please follow this document to fix a corrupted profile: Fix a corrupted user profile.
If that doesn't work please go through this document: You receive a "The User Profile Service failed the logon” error message.
Let me know if that works.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP. -
Group Policy Client service failed the sign-in
After doing an OSD with a Windows 8.1 reference image, I get the "The Group Policy Client service failed the sign-in. The Universal unique identifier (UUID) type is not supported." message. It only shows up on the first very first log in, right
after the OSD process has completed, and never shows up again. I'm using basic OSD task sequences right now, but I'm not sure where to pinpoint the cause of this message.Hi,
This is only happening when we use the original RTM ISO en_windows_8_1_enterprise_x64_dvd_2791088.iso
(without any software update), if we instead use the en_windows_8_1_enterprise_x64_dvd_2971902.iso the error is gone.
Apparently this ISO is updated with the
Windows 8.1 and Windows Server 2012 R2 General Availability Update Rollup
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
IPhone 5 cellular data services failing
ISSUE/SYMPTOMS: iPhone 5 ONLY: Cellular Data stops intermittingly, cellular data locks up without warning, Wi-Fi data connection not working on occasion, iCloud contacts, calendar and reminders not updating, Find My Phone not working, mail or Internet not available or server time-outs. No error messages though. All of these are symptoms of no data service. Problems seem to be related to iPhone 5 failing to switch between LTE and 4G or 3G data services on AT&T.
My iPhone 5 32GB AT&T version (iOS 6.0.2) along with my clients and family using iPhone 5 in the state of Oklahoma are having this issue on their AT&T iPhone 5's: no cellular data connection re-established if at anytime the LTE connection is lost or weak. As with iPhone's prior to iPhone 5, the iPhone 5 is supposed to drop down to the next tier of data service and re-connect to cellular data service when the higher speed cellular data service is not available. Apparently this is not working well on the iPhone 5.
What led me to research this LTE issue was that my iPhone was not syncing on iCloud with contacts, calendars and reminders with my other iOS devices. Other times this issue became apparent was when iMessage quit sending and receiving until I would reboot my iPhone (sometimes it would finally send the message as a “text message”). When I had these problems I also found out I was not getting any cellular data service for Internet browsing, mail, Maps, Find My iPhone, etc. This would happen without notice. In other words I would not receive any notice or error message that data service had stopped other than the fact I was not receiving any mail, iMessages, or iCloud sync updates. My only resolution was to reset or reboot my iPhone several times a day, and that would resolve it about 70% of the time.
I have talked to Apple Support on 2-3 occasions in the last week and AT&T Support twice in the last 2 days. If it is really true, only the AT&T Technical Support Advisor informed me of a nationwide issue relating to iPhone 5 and LTE: iPhone 5's are not re-connecting to 4G or 3G cellular data service once the LTE data connection is lost or dropped... the voice calls continue to work, but cellular data service fails and stays locked up without an error message until the customer reboots the iPhone.
Obviously this is very unacceptable. We depend on these data services and at minimum need to know when it stops working instead of finding out from a phone call that someone sent us an important email or something.
The AT&T representative also said that both AT&T and Apple are aware of and are working on the issue as it is a nationwide problem with iPhone 5 and LTE. The Apple Support Advisors I talked to made no mention of this "known" issue. AT&T said that it is partly AT&T responsibility because the capacity of LTE is overloaded and cellular data connections are dropping because of the lack of coverage and/or capacity. They actually refunded my data service for a whole month in apology for the inconvenience (I did not even ask for that--I just want my data service to work). But they also said that Apple has responsibility in this issue because the iPhone 5 should drop down and re-connect to the next lower tier of data service when LTE is not available or lost; instead, it is locking up somehow or it still thinks it is connected to LTE when it is actually not. I don't know how accurate these statements are, but my problem is real.
TEMPORARY WORK-AROUND / FIX FROM AT&T: Disable LTE on the iPhone 5. Or when you figure out that data is not coming to your iPhone, use Airplane Mode ON/OFF for a few seconds to force re-connection to a tower without rebooting the iPhone. You can Disable LTE on the iPhone 5 in SETTINGS/GENERAL/CELLULAR. I have disabled LTE on my iPhone 5 and have not had any of these cellular data issues since.
Disabling LTE is not acceptable either, but it is working. At least I seem not be losing connection or locking up without knowing it. In my office over the course of a day, my iPhone 5 will jump back and forth on LTE and 4G sitting in the same place. Disabling LTE has stopped this and the problem, but the iPhone 5 should switch cellular data services seemlessly just like the phone switches towers on a phone voice call seemlessly (most of the time).
WI-FI ALSO STOPS WORKING SOMETIMES AFTER THIS LTE disconnect / lock-up issue: That has been my experience along with my clients and family as well. If you use Wi-Fi a lot on your iPhone it will hide this LTE issue until you leave your Wi-Fi and get on LTE and then drop LTE (silently) and then go back to your Wi-Fi. My experience has been I have to reboot the iPhone to even get Wi-Fi working again after that happens.
I do not know if some of these comments and analysis are really accurate or valid or not... all I know for sure is since I upgraded my iPhone to the 5 along with my other family members and clients, we have had "no data" on many occasions and are continually rebooting our iPhones and looking for what is wrong.
My questions to the support community are these:
1. Is anyone else having this issue? Or is it just me and my few? Maybe a lot of people do not realize they are not getting their data because they are on Wi-Fi most of the time or they are just rebooting and not trying to identify the real problem. AT&T said it was nationwide iPhone 5/LTE issue. Anyone else heard that from either Apple or AT&T?
2. Is this an iPhone 5 / Apple issue or is AT&T solely responsible? Or is it both? Where do we get a solution??? Is AT&T LTE holding false connections with iPhone 5 or is the iPhone 5 failing to recognize a dropped LTE cellular data connection and then failing to attempt to re-connect with 4G or 3G?
3. Did I miss where this issue is posted? I searched Apple Support and Communities and did not get any hits. Any updates or further insight on the issue? Any other fixes other than Disabling LTE?
4. If this is in fact a real issue belonging in part to the iPhone 5, we need to escalate Apple’s attention to it.
Thanks in advance for your help and feedback.Thank you fellow users and experts for your feedback and updates. Sorry about the large font on the original post... accidental via cut and paste.
I have escalated the issue with both Apple and AT&T. I actually got senior level troubleshooters from both Apple and AT&T on the phone at the same time... rare moment. Here are the key points of the update:
1. AT&T did NOT confirm the earlier statement by another AT&T Technical Support Agent that this was an emerging nationwide issue about iPhone 5 and LTE losing data connection and not reconnecting at a lower level or re-connecting to LTE once the signal came back. So that earlier statement was not accurate as suspected by all of us. The senior tech at AT&T said he has seen this issue sporadically over the last month or so, but only with about 3-4 customers. He said it seems to be location or phone dependent (some phones not all phones).
2. The Apple Tech was satisfied that all that could be done to eliminate my issues possibly relating to my instance of software / iOS had been accomplished except erasing my iPhone and restoring as a new phone (I have avoided this inconvenience with the argument that other family/clients with the iPhone 5 have had the same problem).
3. AT&T went so far as to examine which towers I had been connecting to over the last week and looked at other technical data that could possibly explain the issue. I now know I have 3 towers that provide LTE within 4 miles of my home/office, one within a half mile. But so far there is nothing to explain or even properly identify the issue. AT&T offered me to take my phone to an AT&T store, try to force replicate the problem there, if so, the store would put my SIM card in a brand new iPhone 5 (just to test) and try tor replicate the problem again. If replicated on a new phone, there is a deeper issue; if resolved on a new phone, the answer is obvious. I have not taken the time to do this yet.
4. On Friday, Jan 4, 2013 while talking and between the tech support calls (on a different phone), I was able to re-create the problem 2 separate times in my home/office by forcing my iPhone to weaken its connection to service (burying it under electronic gear) and then waiting a few minutes, then trying to browse the Internet--no data service unless I manually reset the connection. I am only able to cause the issue to occur if there is at least 15 min of idle time after a weak signal condition AND only if I don’t completely lose a connection to cellular voice service. It seems that if you go down to NO SERVICE the phone will do new a search and keep searching until reconnects to LTE or other signals correctly, but a weak connection seems to be strong enough for voice service but can sometimes cause the LTE data service to stop without reconnecting to LTE, 4G or 3G unless I manually intervene. It also seems that idle time with a weak connection is also necessary to re-create the problem manually. Since Friday, I have not been able to re-create the problem. This has been an intermittent problem, so who knows.
FYI, I have never had this problem with my new iPad (also on AT&T LTE) that has been with me when the iPhone fails to have data service, but my iPad is never in my pocket or other places with perhaps less signal.
Again, if you are connected to Wi-Fi on your iPhone 5 most of the time, you may never notice this issue if you are even having it.
So far no progress on the real issue or resolution, but both Apple and AT&T have put forth very admirable effort.
If you or others you know are having this issue, please take the time to post a reply to this issue. Thank you. -
Essbase Registration With Shared Services Fails...
Hi all,
I have three system A, B, C in a distributive manner. A has only Oracle 11g and Essbase Server. B has Shared Services, Planning, Essbase Essbase Components, Workspace. C has EPMA, Calc Manager, Reporting Analysis. I created separate database for each components. While configuring I do the following-
-> First on B I configured Shared Services/Common Settings with its database(1st Time). I could see the green tick.
-> On A I configured Shared Services/Common Settings with previously configured database. I could see green tick.
-> On A configure Essbase Server, here I get the error which shows Register with Shared Services failed.
Examining the configtool_err.log navigate to D:\Hyperion\logs\config folder I see the following message-
(Jun 10, 2009, 01:13:32 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Jun 10, 2009, 01:13:42 PM), com.hyperion.essbase.config.EssbaseAgentTaskProcessor, ERROR, Error in executing the script to register Essbase as a service: exitCode = 1
I am using v11.1.1.1 on Win 2003.
Can anyone pls help me how to solve this??
Thanks.
Edited by: Sap B on Jun 10, 2009 12:52 AM
Edited by: Sap B on Jun 10, 2009 1:14 AM
Edited by: Sap B on Jun 10, 2009 1:15 AM
Edited by: Sap B on Jun 10, 2009 1:48 AMThanks John. I was so anxious to get a response from you. See, on the machine where only Essbase Server is installed( and 11g as well), on configuration page I get two options- Hyperion Foundation and Essbase. Now Hyperion Foundation( Configure Database and Common Settings) configuration is done properly with previously configured database.
Now in Essbase node there is Essbase and under it is Essbase Custom Configuration. when I try to configure it I get the error that Register to Shared Services failed. I could see green tick on Essbase Custom Configuration, but a red cross on Essbase.
What needs to be done John?? Please help.
Edited by: Sap B on Jun 10, 2009 2:06 AM
Edited by: Sap B on Jun 10, 2009 6:22 AM -
Music services failed to load an unexpected error occurred
Hi!
Till the last Day, the WiFi and/ore the USB-Sync with iTunes runs perfectly.
But at this moment, it doens't work anymore and i got this message on my DM6 "Music services failed to load an unexpected error occurred"
I don't know why, cause i didn't change anything on my DM6, iTunes ore Torch.
This ist my Desktop.log
13:05:54.907|INFO |12|Rim.Desktop.Media|39001|Got Request POST http://192.168.2.105:4481/mediasync/music/17afe97cfe9d52d6
13:05:54.910|INFO |12|Rim.Desktop.Media|39001|gzip requested
13:05:54.992|FATAL|12|Rim.Desktop.Shell|0|Fatal Application Error
System.FormatException: The input yields a number greater than 4 bytes.
bei Rim.Common.Utilities.JavaBinaryReader.ReadCompressedInt()
bei Rim.Media.Sync.SyncProviders.Device.Destination.DeviceChanges.ReadChanges(Stream changeStream)
bei Rim.Media.Sync.Listener.HttpMediaServer.OnUpdatesProvided(Object sender, UpdatesProvidedEventArgs e)
bei Rim.Common.Utilities.Events.Eventer.Raise[THandlerArgs,TArgs](Object sender, EventHandler`1 handler, TArgs e)
bei Rim.Media.Sync.Listener.MediaHttpListener.Request(IAsyncResult result)
bei System.Net.LazyAsyncResult.Complete(IntPtr userToken)
bei System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)
bei System.Net.ListenerAsyncResult.WaitCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped)
bei System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP)
13:05:54.994|FATAL|12|Exception|0|Fatal Error
System.FormatException: The input yields a number greater than 4 bytes.
bei Rim.Common.Utilities.JavaBinaryReader.ReadCompressedInt()
bei Rim.Media.Sync.SyncProviders.Device.Destination.DeviceChanges.ReadChanges(Stream changeStream)
bei Rim.Media.Sync.Listener.HttpMediaServer.OnUpdatesProvided(Object sender, UpdatesProvidedEventArgs e)
bei Rim.Common.Utilities.Events.Eventer.Raise[THandlerArgs,TArgs](Object sender, EventHandler`1 handler, TArgs e)
bei Rim.Media.Sync.Listener.MediaHttpListener.Request(IAsyncResult result)
bei System.Net.LazyAsyncResult.Complete(IntPtr userToken)
bei System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)
bei System.Net.ListenerAsyncResult.WaitCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped)
bei System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP)
13:05:58.439|INFO |12|Rim.Desktop.Media|39001|HttpMediaServer status update: ServerOn
What can i do, to fix the problem?
Tank you!
Sorry for my bad english
Greetings from Germany
Kalorie99I found the answer, here in the forum from a user:
Here is the solution that worked for me, based on antoniovtorres post (I resisted the urge to get PO'd and tried to figure out what he must have done):
With desktop manager closed, using Blackberry user tools, navigate to 'Blackberry\system\' (make sure that hidden files are shown or you won't see the 'system' folder).
Move or delete the folders 'Media Sync' and 'media' from the system directory.
Re-open desktop manager.
Click yes to any dialog that appears.
You should now be able to sync music again.
Note that your device may want to double up on your synced pictures and videos, so you may want to delete your pictures and videos off of the device before your next picture or video sync. Hope it works for y'all.
Scott
It works again!
Yeah!
BlackBerry rocks! -
Error from EAS - "refreshing security from Shared Services failed"
Hi,
I was using Native only security in HSS for Essbase 11.1.1.3 and EAS allowed me to Refresh security from Shared Services. (Essbase security was already externalized to HSS.)
However, after I added "MS Active Directory", and provisioned a MSAD user to a native Planning group, EAS errors out with "refreshing security from Shared Services failed" .
I checked Essbase security and that MSAD user is not added to Essbase.
From Essbase Log I see:
Essbase failed to get roles list for [ESB:Analytic Servers:servername:1] from Shared Services Server with Error [32:1062:Failed to connect to the user directory [ HSS'sMSADname].
I then tried to remove MSAD from our H Shared Services and see if this problem goes away. However, MSAD still shows on the left panel menu in H Shared Services. How can I get rid of MSAD?
Any suggestions?
Edited by: user643332 on May 12, 2010 12:05 AMHi,
Are you sure you have removed it from shared services, you may have just disabled it.
You must restart the shared services application server to apply any changes made.
Cheers
John
http://john-goodwin.blogspot.com/ -
I'm sharing this issue we encountered earlier today so that others might benefit from what we discovered.
We're using Win8.1 Ent and on two of the systems, any accounts created encounter the following message upon attempted login (i.e. login fails):
"User Profile Service failed the sign-in. User profile cannot be loaded"
The event viewer shows this:
Windows cannot copy file
\\?\C:\Users\Default\AppData\Local\Microsoft\VSCommon\12.0\SQM\sqmdata-7696-039-00000.sqm to location
\\?\C:\Users\TEMP\AppData\Local\Microsoft\VSCommon\12.0\SQM\sqmdata-7696-039-00000.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Solution which worked for us
In our instance either setting the appropriate permissions on the affected file, or deleting the file resolved it.I had a similar problem, and raised a Premier case, which is mentioned here:
http://blogs.msdn.com/b/asiatech/archive/2014/01/30/new-user-gets-event-1509-after-deploying-ie9-10-11-packaged-by-ieak.aspx
It seems this issue with SQM/CEIP creating a poorly ACE'd SQM file has been around for a very long time, with many causes being the installation of Internet Explorer (as was my case, of deploy IE10 to Win7), but other reasons also occur (as in your case
with VS).
It seems to me that this is a defect in the SQM/CEIP component, but the issue does not consistently occur is all scenarios, which appears to be an excuse to leave the defect uncorrected, so we have to implement ugly workarounds.. :(
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
Maybe you are looking for
-
Itunes Wont open - New observation
as usual my itunes refuses to open but now i have noticed something whenever i open it or QT it shows in the procees tab in the task manager for a second and then disappears suggetions ?
-
Scared that someone may be able to hack my compute...
Hello, Someone I did not know called me today with the username WEBCAM, from the United States. I answered with only the voice option, but I ended the call immediatelly and blocked the user (whose caller ID is: s246112). I am scared that he may be a
-
Hi, We are using ESS/MSS in EHP7. I have configured Leave Approval workitems for POWL to appear in the Work Items powl query by folowing below blog. POWL Inbox configurations for Manager Self-Service EhP5 and above Leave approval workitems appear cor
-
How to sync an Album from Photoshop Elements 9 to an IPad?
I have editd lots of pictures in Photoshop Elements 9 and put them into an album in a particular order. Is there a way to sync the album from Photoshop to an IPad without losing the sequence in which I have arranged the photos? So far they come up in
-
I am using Dreamweaver 8 and Flash 8 in an attempt to play a flash video on my website. I have read the tutorials thoroughly and I still cannot get a video to show on my website. I have tried inserting swf files and I have tried inserting flv files.