Freezing or Long Pauses when using Phone

I am noticing that when I go to use my phone for email and TM , sometimes it stalls in the process of processing a letters entry, somtimes it completely stays frozen.
any ideas or ways to eliminate this ?
Is the phone flawed or is it defective?

I've noticed that my iPhone bogs down some at times when receiving email including the keyboard - especially when receiving a number of messages and if any of the messages include an attachment or attachments of any significant size.
When responding to a post here on my iPhone when connected via EDGE before the page completely loads, the keypad will have some pauses which goes away after the page has completely loaded.
I suggest trying a Reset, which is done by pressing and holding the Home button and Sleep/Wake or On/Off button simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so.

Similar Messages

HT1947 The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1. This seem to happen after the update. Any suggestions?

The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
This seem to happen after the update. Any suggestions?

Dear Apple friends,
I have the exact same problem with some apps.
Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
Should I update to the latest firmware and do what raymond73 said?
Is there a fix for this issue?
Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
Is it possible to downgrade to iOS 6?
Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
Should I wait or go to the place I bought it and try to get the money back?

Is it true that music pauses when a phone call comes in even when the ios6 'do not disturb' feature is activated?

is it true that music pauses when a phone call comes in even when the 'do not disturb' feature is activated?
thanks in advance

You could test it out and let us know!
Best of luck.

Is there any way to use embedded commands in text to create pauses when using text to speech in iOS 5? You can do it in OS X by typing [[slnc 2000]] to get a two-second pause.

Is there any way to use embedded commands in text to create pauses when using text to speech in iOS 5? You can do it in OS X by typing [[slnc 2000]] to get a two-second pause.

Thanks for the reply Russ.
Yes, I've considered adding titles and/or generators in the FCPX storyline, but this creates a need to render the entire timeline. As I'm juggling library locations and hard drive spaces I just didn't want to add a new render that will occupy a lot of space. It's also a bit of visual clultter for me, so my goal is to find the best workflow for adding this stuff on or after export.

Long pause when opening PDFs - v10.1.3 Win 7 64bit

Hi all, when opening any PDF, most of the time I seem to get a long pause in Adobe Reader straight after the PDF document has loaded (around 10 to 20 seconds or so). This has only recently started happening. I'm running Windows 7 Pro 64bit, SP1, 8GB RAM, Intel Core i5 3.30GHz and a 256GB SSD drive.
Re-installing Adobe Reader hasn't helped, but are there some other suggestions I could try? Thanks for any help.

A good possibility is that the latest version of Photoshop is demanding things of your display driver that it hasn't been asked to do before. Display driver updates do solve a LOT of issues... I suggest you visit the web site of the maker of your video card and see if they offer an updated display driver you can download and install.
Your mention of the type tool issues implies a possibly corrupted or badly formed font. Chris Cox just the other day shared a neat link to a handy font troubleshooting page... http://kb2.adobe.com/cps/843/cpsid_84363.html
Lastly, it never hurts to set all Photoshop preferences back to defaults and then reconfigure only the things you know you need to change... Do this by pressing and holding Control - Shift - Alt when cold-starting Photoshop. You have to be very quick, and if you're quick enough Photoshop will prompt you to confirm the deletion of the current preferences.
Good luck!
-Noel
P.S., At the moment, on my system Photoshop CS5 seems very stable. I had some periods of instability, and display driver updates from ATI seem to have solved that completely. Currently I'm using Catalyst 11.9, which may be interesting to you if you're using an ATI card.

My phone was recently updated to 8.1. After the update, when text messages are sent when my phone is off, I no longer receive when my phone is turned on. Is there something in Settings that needs to be changed? I never had this problem before the updat

My phone was recently updated to 8.1. After the update, when text messages are sent when my phone is turned off, they no longer appear when I turn the phone on. Is there something in Settings that needs to be changed?

MetsFanGirl,
Thanks for verifying. Are you having issues receiving both iMessages and standard text messages when they are sent when the phone is turned off? Try this and test... http://vz.to/1qjiOs7
LindseyT_VZW
Follow us on Twitter @VZWSupport

Firefox tends to freeze and/or crash when using adobe 9 to make or save pdfs

When using adobe acrobat 9 pro, I have had the experience of Firefox freezing in a "thinking mode" or just straight crashing when printing a pdf of a web page, or even saving a pdf that downloaded. Sometimes, an error stating adobe acrobat plugin failed will load, but not always.

Thank you for your answer, we did not start the deployment of FF3 yet.
FF3 support is still under development (for NW 7.1)
Do you mean that Firefox 3 will not be supported on NW 7.0 ?

GC taking long time when using Concurrent Mark Sweep GC with Sun JDK 150_12

We are having problem of Garbage collection taking too long. We are using Weblogic 9.2 and Sun JDK 150_12
Below are the memory arguments we are using. We are using Concurrent Mark Sweep GC. What we are observing is Young Generation is getting filled up and consequent tenured generation also hangs with long pauses.
Below are the JVM arguments we are using
-Xms2560M -Xmx2560M -Xloggc:${LOGDIR}/gc.log -XX:+PrintGCTimeStamps -XX:+PrintGCDetails -XX:+UseParNewGC -XX:+UseConcMarkSweepGC -XX:+CMSParallelRemarkEnabled -XX:SurvivorRatio=128 -XX:MaxTenuringThreshold=0 -XX:CMSInitiatingOccupancyFraction=60 -XX:NewSize=512m -XX:MaxNewSize=512m -XX:MaxPermSize=256m
I have seen many forums where there are many reported issues with Concurrent Mark Sweep garbage collection with Sun JDK, but with different recommendations. But did not find any defnite recommendation. Please advice.
- - Tarun

We are having problem of Garbage collection taking too long. We are using Weblogic 9.2 and Sun JDK 150_12
Below are the memory arguments we are using. We are using Concurrent Mark Sweep GC. What we are observing is Young Generation is getting filled up and consequent tenured generation also hangs with long pauses.
Below are the JVM arguments we are using
-Xms2560M -Xmx2560M -Xloggc:${LOGDIR}/gc.log -XX:+PrintGCTimeStamps -XX:+PrintGCDetails -XX:+UseParNewGC -XX:+UseConcMarkSweepGC -XX:+CMSParallelRemarkEnabled -XX:SurvivorRatio=128 -XX:MaxTenuringThreshold=0 -XX:CMSInitiatingOccupancyFraction=60 -XX:NewSize=512m -XX:MaxNewSize=512m -XX:MaxPermSize=256m
I have seen many forums where there are many reported issues with Concurrent Mark Sweep garbage collection with Sun JDK, but with different recommendations. But did not find any defnite recommendation. Please advice.
- - Tarun

New "long pause" when I'm trying to select an item from a long menu?

So, just in the past few days whenever I try to select an item out of a long menu, I'm unable to select it until after a long pause of approx 30 seconds. For example, in Handbrake if I scroll through chapters and want to pick a certain chapter, the program sits for about 30 seconds before it will select the chapter.
This has also happened in Itunes when I'm trying to select a genre. It will allow me to scroll all the way down with no problem but when I try to select the genre it sits there for about 30 seconds before doing anything.
Anybody else having this issue? Any fixes?
Thanks.

nobody else having this happen?

How do I turn off all alerts when using phone

It is very annoying when i'm using phone feature to hear alerts for games, text messages, FB, etc. Is there a way to turn all of these off when I am using phone feature?

Flip the Ring/Silent switch while on a call.

When using phone there is a hmmm that is tranmitting on the phone

iphone 5 with At&T I hear a low buzzy noise when using the phone. The person on the other end hear it too

Computer:
MacBook Pro 2009
Mac OS X 10.6.8
2.26GHz Intel Core 2 Duo
4 GB RAM
Still have over 80GB left...plenty. Thanks

Keyboard no longer working when using Citrix Receiver and OSX10.9.5

I use Citrix Receiver and an iMac to connect to my work desktop from home. I have the latest release of Citrix Receiver. This morning I upgraded to OSX 10.9.5 and, after the update, my keyboard was not recognised when using Citrix Receiver. It works fine otherwise. Yesterday I had no problems. Is there something in the new OSX upgrade which interferes with Citrix Receiver? Does anybody know what I need to do to get it working again?

I had the same problem and found the solution on another discussion board. You just go to the dock and click on Finder, then click back in the Citrix window and the keyboard works again. At least for me.
MacBook Pro 2011

Packet loss / pausing when using 802.11N (Intel 6300)

Hi,
Previously, I had posted a thread involving the Intel 6250, and lack of detection of N WiFi on that card. Some time later, I bit the bullet and got an Intel 6300 card off eBay. After receiving it today, I popped it into my Thinkpad X220, and it worked.... sort of. I can definitely see wireless N support, and can associate with my 2.4 GHz mixed-mode B/G/N network at 130 Mbps, and my 5 GHz N-only router at around 243 - 270 Mbps. However, right off the bat, it seems the number of "Tx Excessive Retries" in iwconfig climb up to several thousand within ~ 15 - 20 minutes of connecting. Also right off the bat, pings are rather inconsistent (typically at least 2 ms greater than when the card is forced to work in G-only mode, and with pauses and spikes up to 800 - 2000 ms, and packet loss from 5 - 10%)
From what I have gathered so far, there has been a bug in the iwlwifi kernel tree that affects N wireless users, and this bug has been around since around 2010 or even earlier. However, I was under the impression that some sort of fix has been merged into the mainline Kernel at this point (I'm on 3.5.3-1-ARCH BTW), and my symptoms are somewhat less aggressive than the ones others described (basic web browsing works reasonably well, though there is often noticeable lag in the response times, but anything latency/packet loss-sensitive will suffer in a major way.) Has anyone managed to get wireless N to actually work reasonably well on Arch (or for that matter, ANY linux distro)? As I understand it, the matter is one of relation to the kernel module itself, so distro-distro variations of userspace apps shouldn't be as much a factor anyway. I am using WICD for my network manager, and am happy to say that it does its job admirably well (assuming the card is set to G-only mode, but the connection itself is actually maintained quite stably even in N mode.)
While I understand that the 11n_disable=1 "fix" allows most people to get on with their lives, I am rather alarmed that this is being considered a long-term solution. Many laptop owners (ThinkPad owners like myself for example) are essentially locked into Intel WiFi cards, unless we are willing to take an expensive risk and flash our BIOS to one that that doesn't have a "whitelist" of approved cards (something that can void the warranty or worse, brick a laptop.) All the while, Intel is still claiming Linux support for a card whose major capabilities are essentially neutered purely based on the OS a user chooses to run (yes, I do consider N to be a major capability, considering 300 Mbps N WiFi is basically old news, with many manufacturers coming out with full 450 Mbps routers. Also, chipsets like Atheros seem to have no problems with offering both performance and stability under Linux... my desktop rig using an Atheros card manages perfectly fine on a full-rate wireless-N network with essentially no packet loss or latency spikes.)
Below is some information that might be useful:
iwconfig (802.11g, ~ 1 hour after connection and running a few speedtests, browsing, ping testing):
wlan0 IEEE 802.11abg ESSID:"dd-wrt"
Mode:Managed Frequency:2.437 GHz Access Point: XXXXXX
Bit Rate=54 Mb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=69/70 Signal level=-41 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:359 Missed beacon:0
iwconfig (802.11n, 5GHz after ~10 minutes browsing/ping testing):
wlan0 IEEE 802.11abgn ESSID:"net2"
Mode:Managed Frequency:5.745 GHz Access Point: XXXXXX
Bit Rate=243 Mb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=55/70 Signal level=-55 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:860 Invalid misc:50 Missed beacon:0
iwconfig (802.11n, 2.4 GHz after connecting and running a speedtest):
wlan0 IEEE 802.11abgn ESSID:"dd-wrt"
Mode:Managed Frequency:2.437 GHz Access Point: XXXXXX
Bit Rate=117 Mb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=66/70 Signal level=-44 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:974 Invalid misc:59 Missed beacon:0
dmesg | grep iwl :
[12011.488089] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[12011.488092] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
[12011.488269] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[12011.488271] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900050f8000
[12011.488273] iwlwifi 0000:03:00.0: HW Revision ID = 0x35
[12011.488585] iwlwifi 0000:03:00.0: irq 50 for MSI/MSI-X
[12011.491862] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
[12011.492112] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[12011.492114] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[12011.492116] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[12011.492117] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[12011.492119] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[12011.492121] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[12011.492206] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12011.502925] iwlwifi 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6
[12011.502928] iwlwifi 0000:03:00.0: Device SKU: 0x1F0
[12011.502930] iwlwifi 0000:03:00.0: Valid Tx ant: 0x7, Valid Rx ant: 0x7
[12011.502946] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[12011.503105] ieee80211 phy8: Selected rate control algorithm 'iwl-agn-rs'
[12011.503456] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12011.503661] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12011.745631] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12011.745868] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12073.651471] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[12073.651474] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
[12073.651660] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[12073.651661] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900050b8000
[12073.651663] iwlwifi 0000:03:00.0: HW Revision ID = 0x35
[12073.652241] iwlwifi 0000:03:00.0: irq 50 for MSI/MSI-X
[12073.655662] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
[12073.655887] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[12073.655890] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[12073.655891] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[12073.655891] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[12073.655892] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[12073.655894] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[12073.655975] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12073.666587] iwlwifi 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6
[12073.666593] iwlwifi 0000:03:00.0: Device SKU: 0x1F0
[12073.666595] iwlwifi 0000:03:00.0: Valid Tx ant: 0x7, Valid Rx ant: 0x7
[12073.666618] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[12073.667056] ieee80211 phy9: Selected rate control algorithm 'iwl-agn-rs'
[12073.667456] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12073.667659] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12073.908411] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12073.908632] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12087.261869] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12087.262090] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12087.487757] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12087.488010] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12087.699574] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12087.699781] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12087.837322] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12087.837526] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12097.329577] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12097.329832] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12097.797748] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12097.797970] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12098.016220] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12098.016458] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12100.458762] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12100.459006] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12100.608769] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12100.609021] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12100.764093] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12100.764341] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12100.979029] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12100.979228] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[12101.159987] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[12101.160208] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
lshw | less :
*-network
description: Wireless interface
product: Centrino Ultimate-N 6300
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 35
serial: 00:24:d7:be:9e:74
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet phy
sical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=3.5.3-
1-ARCH firmware=9.221.4.1 build 25532 ip=192.168.1.145 latency=0 link=yes multic
ast=yes wireless=IEEE 802.11abgn
resources: irq:50 memory:f2500000-f2501fff
Thanks,
- A.G.

I have an ASUS UX32VD-DB71 which has the Intel Centrino 6235 wifi card. I've been having this laptop for more than 6 months and I've tried different solutions to fix the issue with Wireless-N but none of them were stable other than disabling N completely using 11n_disable=1
I've tried different kernels all the way from 3.2 to the latest 3.7 series of kernels (both in the openSUSE tree as well as mainline) with no luck whasoever. I also tried installing the compat-drivers from 2013-01-23-1-u version onto my 3.6 kernel which provided the same results too. I see packet loss with N and the G speeds are just too slow. I have a workstation in my network and I can only transfer effectively at 1.5 MB /s max over G whereas an old laptop from 2007 which has an 1x1 MIMO antenna (again Intel though) can connect at 144 Mbps to my router and transfer files at least 3-4 times faster (if not more).
It is totally unacceptable for Intel to not just fix this issue for Linux.
Last edited by Tuxdude (2013-02-17 01:38:59)

Treo 755P from TELUS freezes and/or reboots when using bluetooth headset

My treo 755P has worked fine for almost a year. I recently purchased a Motorola H870 headset. Since then the phone freezes up and/or reboots several times a day. Sometimes when I am dialing and sometimes apparently randomly. I have worked with my provider, TELUS, but have no resolution. I am using the latest Palm desktop software and I have tried a hard reset on the phone. Any other ideas??
Thanks.
Jason
Post relates to: Treo 755p (Sprint)

Hi.. Welcome to the Palm forums. Lets put things in order here:
1- got 755p and worked fine for almost a year
2- purchased Motorola H870 and 755p starts freezing.
Bottom line here is that you 755p worked find until the H870 was introduced. This headset is not on Palms bluetooth compatibility list. For the list see this link: http://kb.palm.com/SRVS/nua/launchKB.asp?c=44829 .
I would recommend that you do a hard reset and do not sync or use the H870 for atleast 24hrs. If the 755p works fine that will confirm the H870 is the problem. If your still having the problem then you will need to look at a repair/replacment.

Workspace no longer works when using flex application as Form

Hi,
I've got a problem in the Workspace with one of my process that use a flex application as form.
I used the tutorial "Creating Flex® Applications Enabled for LiveCycle® Workspace ES" to create the flex application and it works well in the workspace (displays ok and datas well passed to the process).
The task completes well because my process fires the next step with all the datas filled in the task.
But after the end of the task (when I click on the submit button of the form) the Workspace is no longer usable.
I can no longer access preferences, messages, starting process panel... when a click on an item in any Menu nothing occurs. Everything is blocked.
I must restart the Workspace to be able to use it again.
Can someone help me please?

I think I have it solved, will check...
When modifying, the P3 in the go url was left out. what was P2 should be P3 and the correct P2 would have the table.column name.

Freezing or Long Pauses when using Phone

Similar Messages

Maybe you are looking for