Freezing PO attachment after approval

Hi,
When a file is attached to PO, is it possible to freeze the attachment after approval? as the users are able to remove or change the attachment from PO even after approval. This should not be happened. Please help me to achieve this.
Pavan

Pavan,
What type document you are asking? If it is Terms and Condtions attachment based on your profile values it displays. Users cannot change that document.
If it is document attached from Applications (like attachement button ), User can delete if user has employee and buyer setup.
Thanks
Sudheer

Similar Messages

  • I have created a form in InDesign, exported to a pdf, created an editable form and saved.  When I open the form and make changes and save, the reopen the changes are there.  If try to email this form as an attachment after editing, the attachment is alway

    I have created a form in InDesign, exported to a pdf, then created an editable form and saved.  When I open the form and make changes and save, then reopen the changes are there.  If try to email this form as an attachment after editing, the attachment is always minus the edits.   ????

    Hi chuck,
    If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
    Can you please send the form to me at [email protected]  so that I can have a look.
    Regards,
    Rave

  • PO not created after approval.

    Hi
    We are working on SRM4.0 classic scenario with SAP R/3 4.7.
    We are having following scenarios to create backend docs.
    1. All SC created from catalog should create PO in backend R/3.
    2. All SC created using Free text description (All non catalog items) should generate PR in backend.
    All PRs are getting generated perfectly as per point 2.
    But the problem is with point 1 where PO is not getting generated in backend after approval is done.
    As per my analysis, system is picking the PO number and object type perfectly. But all these records exists in BBP_DOCUMENT_TAB. Even after running CLEAN_REQREQ_UP also they are not going to backend.
    In BBP_PD it shows I111  Item in transfer process with no check in inactive column.
    No errors in SC monitor(RZ20).
    I dont know where am I missing. Checked all possible things.
    Did anyone faced such situation please throw some light on this.
    Thanks in advance
    Jagadish

    Jagdish
    Not sure, try to run FM BBP_PD_PO_TRANSFER_EXEC...
    Regards
    Reddy

  • Thunderbird cannot open attachment after idle for several hours on Windows Terminal Server 2008 R2 Enterprise

    We are using Thunderbird on WTS2008 R1
    Cannot open attachment after thunderbird is launched for a short period of time. Tried to save attachment but the attachment saved actually comes with 0kb. Thunderbird works fine after restart itself, not sure if any settings can fix this?

    Hi Darrkon,
    I suggest checking the status of the HealthMailbox on each of servers.
    Also try to re-create the mailbox. You can safely delete and recreate health mailboxes.
    Be aware that any local Managed Availability probes that are using the these mailboxes will fail until the Microsoft Exchange Health Manager is restarted.  Once that service is restarted, it will recreate any mailboxes that it needs. 
    More details in the following similar thread, just for your reference:
    BSOD after creating DAG
    http://social.technet.microsoft.com/Forums/exchange/en-US/44d1cd98-cba1-4ed0-b0e7-8aa76ee3eabc/bsod-after-creating-dag
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Patches not visible in SCCM 2007 Site server even after approving the patches in WSUS

    Hi,
    The patches are not appearing in SCCM 2007 site server after approving the same patches in WSUS.
    Below are the patches.
    MS14-080: Cumulative Security Update for Internet Explorer - Windows Server 2008 SP2 - IE 7 - KB3008923 [23,186.1]
    MS14-018: Cumulative Security Update for Internet Explorer - IE 11 - KB2929437 - Windows Server 2008 R2 SP1 (x64) [4,32.4]
    MS14-066: Vulnerability in Schannel Could Allow Remote Code Execution - Windows Server 2008 SP2 - KB2992611 (x64) - V2 [1,8.3]
    MS14-038: Vulnerability in Windows Journal Could Allow Remote Code Execution - Windows Server 2008 SP2 - KB2971850 [1,8.1]
    MS09-060: Vulnerabilities in Microsoft Active Template Library (ATL) ActiveX Controls for Microsoft Office Could Allow Remote Code Execution - Visio Viewer 2007 SP1/SP2 [1,8.1]
    MS12-001: Vulnerability in Windows Kernel Could Allow Security Feature Bypass - Windows Server 2008 R2 Gold (x64) [1,8.1]
    MS14-033: Vulnerability in Microsoft XML Core Services Could Allow Information Disclosure - Windows Server 2008 SP2 - KB2939576 [1,8.1]
    MS14-025: Vulnerability in Group Policy Preferences Could Allow Elevation of Privilege - Windows Server 2008 SP2 - KB2928120 (x64) [1,7.8]
    MS13-014: Vulnerability in NFS Server Could Allow Denial of Service - Windows Server 2008 R2 Gold/SP1 (x64) [1,7.7]
    I have approved the above patches in WSUS and ran syncronization. The log wsyncmgr.log show that synchronization is done and even all child sites are syncronized. But I am unable to find the above even in the parent site. Checked all the SUP settings and
    all the 2008 server updates are set and marked to download.
    Please help me out on fixing this.

    So you should NEVER approve anything in WSUS. This will cause problems with your clients. Honestly since you approved things in WSUS, I would uninstall WSUS and reinstall it, reinstall the SUP, this will clear up any issues that now exist.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • My iMac freezes up shortly after startup.

    My iMac freezes up shortly after startup. I can't move the mouse or use the keyboard. I have to manually shut down several times before it would work.

    Hi patrickbryant, 
    Thank you for participating in the Apple Support Communities. 
    If your iMac is becoming unresponsive when you start up, I recommend trying to boot into Safe Mode as well as using Disk Utility to verify your hard disk. You can find these steps outlined at this link:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck - Apple Support
    Best Regards,
    Jeremy 

  • Workflow in Project server 2013 online not going particular stage after Approval

    Hi All,
    i have created workflow using sharepoint designer 2013 for project server 2013 online. and i have also set the approver after the first stage. when i create a project using this workflow, project is created successfully and the approval task also go for
    a approval to specific user. and i have set the property that after approval it has to go on specific stage. but the problem is when user approve the task it shows approved but my stage in workflow is remain same. it is not going to any stage. 
    i don't know why this type of problem is occur. 
    FYI, i have created same workflow for Project server 2013 on premise(Which is installed in my server) and
    it is working fine but when i want to deploy this workflow in
    project server 2013 online its giving error.
    so please help me to solve this type of issue.
    Thanks

    I am also experiencing issues with this.  After the approval task is completed, the Workflow gets cancelled with the following message
    RequestorId: 60d96368-4cb4-b059-8086-604972a92e60. Details: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context)
    at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager
    bookmarkManager, Location resultLocation)
    All other desired workflow actions work as expected.  Emails are sent, project is moved from stage to stage, however as soon as the workflow approval task is completed, either Approved or Rejected, the Internal Status is changed to Canceled and the
    workflow fails.
    What is interesting is when the Approval task is completed, the approver will receive an email notification that the task was CANCELLED or DELETED....
    not COMPLETED, which is what would be expected.
    Has anyone seen this - any potential resolution?

  • Sending a document as an mail attachment with approve and reject button

    Hi all,
         i have an infopath form where a user fills the form and on submit the form is saving as an document in the document library,
    now my question is, how can i get this document as an mail attachment with approve and reject option.

    Hello,
    You need to hide them on form load for user. Add one more hidden control in form and keep control value blank initially. Now add rule on button submit to set the control value to some other so you can hide/show the button.
    Now add rule on approve and reject buttons that, if field1 is blank then hide this control.
    http://office.microsoft.com/en-in/infopath-help/add-formatting-rules-HA101783371.aspx
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Request stays in Authorizing state even after approval

    I've been trying to debug this for days now and it completely breaks my lab - until it fixes itself after some random time and then breaks again
    I created a simple approval workflow which seeks approval from [//Target/Owner] when joining an Owner Approval Group. The request makes it to the Group Owner, but when the group owner approves the request, it stays stuck in Authorizing state and the user
    doesn't become a member of the group. The WF also remains in Running status even after the request is approved. 
    I've seen some similar problems around on the internet, and all seem to suggest Exchange related issues. I don't have an exchange setup in my lab, but I don't think not being able to send an email would completely break the approval process. Besides, it
    does seem to spring back to life randomly and it all starts working again before breaking - very intermittent.
    I've been messing around with the PS WF activity (which I use to calculate custom approvers), but I have disabled that WF completely for now and I'm just using OOTB activities and approvers.
    Any suggestions on what the issue could be (apart from exchange)? There are no errors in the event logs either, but there are loads of exchange related errors/warnings which are expected. Alternatively, is there somehow I can disable the "feature"
    where FIM tries to send an email?
    Thanks

    Yep, the approval responses are generated but the request still stays in Authorizing with the workflow in Running state. 
    What makes this even more bizzare is the intermittent nature of the issue, it just seems to resolve itself after some time then break again. 
    One thing I have noticed is that the problem starts when I use my custom WF to add approvers to the WF dictionary - the first activity is a powershell activity which calculates the approvers and the next one is the OOTB approval activity which sends an email
    to [//WorkflowData/Approver]. However, the PS script runs just fine, and the approver gets the request but after approval nothing happens (although approval responses are generated)

  • Approver regrouping in Shopping cart after approval and refresh button is clicked

    Dear Experts
    I created a shopping cart (Say 5 levels of approval) it reaches the approver . The approver approves the shopping cart and the cart is in completion step. When after approval in 3 rd step. If i click on refersh button at the top, the list of approvers who approved the cart are getting grouped in to a folder like structure. How it can be avioded i.e we need the approvers to be shown in sequence even after n approvals and clicking on the refresh button.
    Thanks & Regards
    Arun.K.P

    Hi Laurent,
    Please check the screenshots.

  • After approv status inquiry, it should not allow to change anything .

    Hi,
    As per the client requirement, we have assigned the three level status profile to in inquiry process like Block status, Review and approve status.
    Block status-It is initial status. After save the document it will be in block status
    Review status u2013It is the 2nd status. After review of authorized person, it will be changed as review status.
    Approve status- If everything is correct, then higher authority will give the approval for same and will change the status.
    Here client requirement is after approval of same inquiry document, it should not allow to anybody to change anything (quantity, material, any addition) in same document with va02 Tcode. Need your support if anything possibility is there for same requirement.
    Thanks
    Utpal mishra
    Sr.SD Consultant

    Already another thread is still open. Please maintain one thread for better monitoring.
    Thanks
    Regards,
    Reazuddin MD

  • Toshiba Satellie L655-s5191 freeze several time after update the Bios from 2.3 to 2.8.

    satellie l655-s5191   freeze several time  after updating bios

    If the RAM and HDD have been ruled out, then it is either a motherboard or CPU issue, and would require service to repair.
    Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
    Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

  • Shopping Cart Item deletable after approval

    Hello all,
    I have an issue regarding Shopping Carts: When a Shopping Cart is approved, gives a Purchase Order which is sent to Vendor, Requester can still delete Item of Shopping Cart, which has effect to delete Item in Purchase Order. I opened a message for SAP but they tell me this is the standard behavior which is for me a non sense!
    I would like to know if you already met the fact that Shopping Cart Item being deletable after approval and if you corrected it, how?
    Thanks,
    Patrick
    PS: I am working on SRM 5.0

    Hi,
    Yes this is a standard behaviour.
    The business case is a user who made a mistake and do not have access to PO due to lack of authorization.
    He should be able to delete his SC which trigger a delete status at PO item level.
    Then , if system is well configured, an update output is triggered to communicate to the vendor taht the line item has been deleted.
    If you do not want this behaviour, just modify the roel authorization in PFCG transaction.
    Kind regards,
    Yann

  • How to email .pdf PO to supplier after approval?

    Hi All,
    My client has a requirement to email .pdf PO to supplier after approval of PO.
    kindly give me setup steps as to how I can acheive this through workflow.
    You can mail me setup steps to this email address: [email protected]
    Thanks,
    Younus

    The setups are detailed on a note in the following metalink note.
    FAQ: E-Mail PO Functionality [ID 307577.1]
    Basically, make sure XDO is installed, change Purchasing email option to PDF and make sure you enter an email address on po site. For details, refer to the note above.
    Hope this answers your question
    Sandeep Gandhi
    Omkar Technologies Inc.
    Independent Techno-functional Consultant
    513-325-9026

  • Removing Task from UWL after approval

    HI Gurus
    I Need to Delete a task in the UWL after approval
    Scenario:
    I have developed the mss/pcr adobe forms inthe place of standard adobe forms i have configured the customized adobe forms which i have developed in Webdynpro for Java
    So in mss/pcr application we have two levels of approval
    First
    Intiator will enter the data and he will submit the form then it will goto the manager UWL
    Second
    Manager will click on the task(these task ids i have configured in SWFVISU) .And next one more form will be opened with the updated data and manager will approve it and he will click on the approve button then that form should not be in the UWL
    But I dont know what are the settings i need to do for that .
    Please help me in this .

    jvhncvbnc

Maybe you are looking for

  • How to insert multiple rows in a single insert statement in MaxDB?

    hi, I was looking at syntax but i could not get it right.. may be some could help me. // Insert single row works fine INSET INTO test_table(column_name) values (value1) IGNORE DUPLICATES // Insert multiple rows, doesn't INSET INTO test_table(column_n

  • No SuchAgorithmException in Adapter Module configured EAR file

    Dear All, I have created an adapter module using 3DES encryption/decryption algorithm for File/FTP adapter configuration and have deployed it at J2EE server of respective XI system. The alogorithm and adapter module are working fine in DEV & QA envir

  • Function formats textfields

    hi there, MY IDEA: every textfield in my form shall behave in the same way. For example background color is changing if the field is entered. I don' t want to script the whole batch of javascript-commands for every single textfield. Instead I' d like

  • Please dont erase music

    i posted a bulliten earlier about itunes not openeing and about updating and all...well it updated but to update it it's going to have to erase all of my data and it says my music will be erased to.....i payed for all of this...how can it erase it??

  • Adobe Reader XI deployment failing with error code 35

    We are perfroming an enterprise deployment of Adobe Reader XI via System Center 2012 onto Win 7 machines. Our first pilot of 100 users was nearly flawless. Our second pilot of the same size had a roughly 30% failure rate with the error code 0x23 (35)