Freezing while exporting out of premeire cs6?

I am having problems exporting out of premiere cs6. It completely freezes halfway, all of my settings match, does anybody know why this is happening?? please help.

Thank you Mr. Hunt, I found out that it was one of the clips in my TL it was a motion Jpeg,, I had to export it out as a H.264. Thanks for your help.
Date: Tue, 19 Feb 2013 16:01:47 -0800
From: [email protected]
To: [email protected]
Subject: freezing while exporting out of premeire cs6?
    Re: freezing while exporting out of premeire cs6?
    created by Bill Hunt in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
For that error, perhaps this Adobe KB Article will be useful? http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering -or.html Good luck, Hunt
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5086487#5086487
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5086487#5086487
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5086487#5086487. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

Premiere Pro CC freezes while exporting

Premiere Pro CC on a MacBook Pro with an OSX 10.7.4 My source footage is a .mov file shot on a Cannon 7D, 1080p and I am trying to export to an H.264 format in 720p/VBR, 1 Pass with a target and max bitrate of 6. Once the export gets to about 60% it freezes and hangs there then the Mac colorful wheels spins.
This use to work properly for me and I am not sure why it is doing this now. Any ideas or suggestions as to why and what I can do?

I started using CC a while back and have done most of the work on this project in CC. I believe i may be able to finish it in premiere pro cc. At the moment i have the project queued up and rendering.. Its taking a while, but i think it will work. Knowing the issue brings me a lot of relief! I was worried that it was just a problem with premiere. Thank you for you help! That issue is solved!

Freezes while filling out login form to websites

I've been experiencing this for over a month now. Basically, occasionally when logging into a website (i.e. google, designers.mx, amazon, etc. -- really doesn't matter what site it seems), Lion will entirely freeze up for seconds to up to minutes. More specifically it occurs when tabbing from the username to the password field. This will happen both in Chrome and Firefox. I had thought it was related to maybe firefox add-ons (i.e. I have 1password, but i've disabled them and have had it still happen. I do use firebug, but wouldn't think it was related to this issue...
I've already verified there are no issues in the keychain access as well.
I can sometimes unfreeze momentarily it by pressing the power button briefly.
I'm also up-to-date on all my Lion updates.
Any help is most appreciated.

I am so glad I see this posting! I have the same issues for a long time now and I was just going to post my own thread!
The freezing is related to any pasword promopt for me - not just in FF or chrome. Its for VNC, and even mac's own screenserver password prompt!
I found a hack to unfreeze the screen thought with out waiting for 2mins.
On the right bottom corner (where DVD drive is) hold it tight and give a twist like u want to break the laptop. You will see that the screen unfreezes immediately. I do this pretty much everytime I get prompted for password these days.
Something bizare is going on! I have not found a way to permanently fix it till now.

Windows 8 freezes while I try to watch online Flash content and running Audition CS6

I recently bought a online introduction course to Auditon CS6 on Vimeo.com
While I have a setup where I put the lecture on one screen and the program on the other I like to follow tutorials and learn how to use software.
However this proves to be impossible for me in Audition, because for some reason my computer gets completely unresponsive after a little while of watching the lectures with Audition running.
It never happens when Audition hasn't been launched, and I'm kind of suspecting a driver conflict, but I don't have a fancy audio card in my computer, (just built in Realtek,) and find it a bit
odd that it wouldn't be supported as it is some of the most common audio setups around. As far as I know the system runs stable with Audition running and no Flash content started as well.
This has happened for the last couple of months and I've updated Flash and drivers as they roll out. Audition CS6 is downloaded with the Creative Cloud application Manager.
Here is some general info on my computer:
OS: Windows 8 Pro 64 bit.
Motherboard: eVGA x58 Classified (Tried with stock BIOS and also updated to new BIOS)
Audio Card: Realtek (on motherboard)
Graphics: Nvidia Geforce GTX 560 Ti
The system storage device is a SSD (Firmware recently updated due to BSODs apearing, and seems to be resolved.)
I do believe that this might not be a Audition issue, but rather a issue with Flash. However Audition + Flash reproduces this problem faster than anything else I can remember this happening while
using other 3rd party software while playing Flash. (Not exactly the type of software.) I have a suspicion that it is something that occurs if Flash and other programs is paging/wiring/reading the SSD...
I can't remember this happening with Photoshop or other Adobe software, and so I'm also curious to how different Audition runs "under the hood" so to speak. What is it constantly checking
that could lead to a hardware conflict.

A month ago I uninstalled AVG Internet security from my computer making it a lot less potent to BSODs in general, (can't reacall having any.) So today I thought I'd try to learn some more Audition. I could Sit with it for a good while just playing around with recordings and settings and my system didn't react weirdly at all. So the next step was of course to try and load some of the Udemy lectures I had waiting.
As the video was buffering I turned away from the computer for a while, but when I came back it had completely froze up again... I don't think I've ever had a BSOD in this context either, instead of going into BSOD the computer just stops responding completely.
(I'm using the latest version of Flash, tried with both Firefox and Chrome.)
I'm thinking this is a very niche bug and I can't seem to se that it can be anything but a conflict with Flash. Weither it's a memory leek or what ever it is.
I can use Audition fine on my computer it seems, as long as I never start a browser in risk of loading a Flash application, (which would be fine if I was avid, but I need some lectures to get started.)
Nothing really seems to be overloaded (RAM/CPU) before the freeze ocurs either.
I don't really know where or how to adress this to the Flash Player forum/community, (or if there is one.)
Thanks.

IMovie freezes after 2-3 Minutes while exporting

Hi,
I have a 58 Minutes project with hd content which freezes iMovie every time after 3-4 minutes when i want to export it. I tried every possible export option, but the freeze while happen every time.
when i try to export a tiny project (30 sec.) everything works fine. Is the other clip too long? is my macbook too crappy for that long hd-movies? if anyone could help me with this, it's much appreciated.

OK
• Where/How do You do the Export - to iDVD ?
• What kind of material is it to start with ?
streamingDV from miniDV tape, .avi, .wmv, .H-264, .mp4 or what
May be You find anything usefull in my old list
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
iMovie pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named. com.apple.iMovie.plist
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
• Screen must be set to Million-colors
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09)
iMovie updated ?
QuickTime updated ?
Mac OS version ?
• Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match. iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Lennart Thelander
I run "Cache Out X", clear out all caches and restarts the Mac.
Yours Bengt W

In Flex Application Session out while export to excel while using navigateToURL _Self ?

Hi,
I am using Flex 3.0 and facing one problem session out while export to excel in Live server not on localhost .
I have Used navigateToURL (url, "_self"); export to excel. While url is sevrlet call.
In localhost(tomcat) everything is working fine while another server or live in weblogic server, my session Is Getting Lost and User is re-directed to login screen again.
what to do to resolve this issue.
while I tried to use _blank instead of _self then session Is getting preserved but its opening blank new window which user will not accept necessary page.
please Suggest what to do to preserve The session while using _self ..
waiting for quick reply.
Regards,
prabhat

I'm not using Flex, but the following preserves session in Flash:
var url = "http://" + WebServerIPAddress + "/" + ApplicationName + "?data=" + datavalue;
var cmd:String = "window.open('" + url + "','win','height=768,width=1024,toolbar=no,scrollbars=yes');";
var request:URLRequest = new URLRequest("javascript:" + cmd + " void(0);");
navigateToURL(request, "_self");

Premiere Pro CC and CS6 freeze on export

I have a problem with Premiere freezing when exporting a video sequence.
The sequence consists of about 5 min of video from 10 different clips, so it not very big.
I want to export to H.264 format, but a few percent into the export everything freezes and I have to turn off my PC. The same thing happens with export to MPEG2 and MPEG4 formats, but not if I export to AVI format.
At first I suspected on of the clips was causing the problem, but I'm able to take all the clips one at a time, and export each one to H.264 format without any problems. Even If I take the new exported H.264 clips and put them together, and export them again as one file, it will freeze again.
The problem is the same in Premiere Pro CC and in Premiere Pro CS6.
Any ideas on what might be causing this?
/Mark

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

"error: out of disk space message" while exporting Quick time file

Got an "error: out of disk space message" while exporting a 94min hdv project to the quicktime conversion (format:QT mvie, use mose recent settings / Options-dv/dvcpro -ntsc, size-dimensions compressor native) I also tried using compressor to creat a QT movie and got same error message. It gives me an estimate of 4-6 hrs, runs and at the end of 4hrs it gives me the error message. It is a large project, transitions filters 4+vid tracks 9 audio tracks, but Im using a dual4core, 4 gigs of ram.
Is this a ram or hard drive problem. I asume its the disk but cant imagine Im running out of space.
I've tried sending it to the "hard drive bay 1" with 30 free gigs and to the "hard drive bay2" which has 22 gigs open. can't imagine we are making a file bigger than that. I'm thinking about sending it to an external drive with 60 gigs free.
Any help would be great since We have our sound mixer waiting for this as a video reference. Also trying to export OMF files but they are greater than 2 gigs so we're gonna try and split the track up with 4 tracks, 3 tracks & 2 tracks. This has been over a years worth of work and our sound mixing is the last thing to do. Please help us over the hump and I'll thank you on our website, thelaughingplanet and maybe even send you a copy of the movie. Marc

""hard drive bay 1" with 30 free gigs and to the "hard drive bay2" which has 22 gigs"
Sounds like you're getting perilously low on drive space, you should always leave about 15% free on a drive for the OS to do it's thing. Either backup and clear some room, or get another drive.

How to prevent keynote from freezing/crashing while exporting to quicktime?

Keynote freezes/crashes every time while exporting a file as a QuickTime file. Is this a bug or something with the size of the file? It's a 7.6MB file.
Should I re-install keynote? I have it on 2 machines and it does the same thing on both.

MayaFrank:
I have Keynote 6.1 and I have noticed it will allow me to export once. If I want to export again, I must quit and restart Keynote. Not sure why, but it seems to "fix" the problem.

IMovie11 hangs, freezes while generating thumbnails

Often after importing MiniDV tapes using iMovie11 the progress bar for generating thumbnails gets to a certain point and then stops. It will remain this way for over a day unless I Force Quit the application.
The event directory and thumbnail directory of the imported tape do not show any recently created files after a while.
A search on the internet revealed one workaround - delete any zero-byte DV files that iMovie creates and reload iMovie.This worked for a couple of tapes but now I am stuck while importing other tapes.
I am not using Stabilization.
As of this writing, I may have narrowed the problem down to the number of DV files that iMovie creates. For some reason, with those other tapes, it creates almost 2000 such files for a simple 90-minute tape. When I delete over a 1000 of the smallest DV files iMovie will complete the generation of thumbnails.
I have not yet tested what happens if I delete over a 1000 of the largest DV files.
If I import the same tape twice, the two imports will produce a different number of DV files, the difference is in the hundreds but both data sets are still too large for iMovie11 to generate thumbnails from.
I have tried using two different camcorders for importing those other tapes without positive results.
I have a new low-end Mac Pro with the OS present as of Oct of last year (when I bought the computer), 8GB of RAM, 600MB of free disk space, and I use a Firewire adapter to convert the 400 mbps connection coming out of the camcorders to the 800 mbps connection integral to my Mac Pro.
I have tried powering down and back up to remove variables involving the OS and Firewire interface.
I have no other movie projects or events present in iMovie when I conduct my imports.
How do I get iMovie11 to stop hanging, freezing while it generates thumbnails?
Thank you.

Absolutely has to be a bug. This isn't a setting or configuration problem. It might even be a Snow Leopard problem. I had the same problems with A2.1.4 on SL as I do with version A3.0.1. Export hangs seem to happen on images that came from my A2 library that was imported into A3 but originally adjusted in A2. These images were imported from scanned TIFF files. If the adjustment mechanism was flawed in prior Aperture versions then Apple needs to create and distribute a utility that converts these images into something that A3 can use.
I will have to revert to A2 running on Leopard until Apple can get this fixed. If I cannot export, there is no point in running the software. On this discussion thread, we are just trying to fly by flapping our arms.

Premiere Pro System Resouces Not beign used while exporting

Hi all,
I have been editing this video and last night I started rendering it. However, it is far from beign fast. The estimated remaining time AME shows is 65h!!!
However, that's not the worst thing. My CPU, RAM, Hard drive and even GPU are not beign used. The measured system usage while exporting this same clip is:
15% CPU
+- 2GB RAM
1MB/S Footage Hard Drive (out of max. 50MB/s)
Sporadical GPU spikes @90%, average 40%.
Project Characteristics:
Full sequence almost 2h long.
2 Layers Maximum.
Raw clip footage: H264 1080p DSLR Footage.
Red Giant Denoiser II (GPU Accelerated) on 50% of the clips.
PPro's included RGB Curves and HSL on 50% of the clips.
Exporting to H264, 1080p 30fps, VBR 1 Pass, 15Mbps (18Mbps max) using Adobe Media Encoder (PPro's "Export" option doesn't even run).
System Specs:
Amd FX-8350 (8x)4.5GHz
16GB DDR3 1866MHz Ram
Nvidia Geforce GTX650 (2GB GDDR5)
Windows 8 x64 OS.
Cache, OS and Adobe CS6 Suite drive: Samsung 840 PRO 128gb (500MB/S R, 480MB/S W)
Footage & Export Drive: Seagate 1TB (don't know exact model)
I know my graphics card isn't the best for this job, but it is not even beign used... My first thought is that there was an HHD bottleneck, as it is not fast at all, but measuring my system usage I have found that is not the soft chain this time. What am I doing wrong?
BTW, I'm using CS6.
Thanks in advance,
Gonzalo Ruiz.

Wow, I never thought that could make such a difference. Will the speed of those four drives have much of an impact given they are all rated over 120MB/s? Or will just having them on sepparate HDDs be enough? What about 4K?
For example, will the difference between a WD Caviar Blue 1TB and a 850 Pro 256GB (or any other good HDD vs a fast SSD for that matter) be noticeable using it as a cache drive? What about in 4k editing?
Will using a dedicated SSD for both cache and previews be slower than two dedicate HDDs? The SSDs I am comparing are 4x faster in R/W speeds than this HDD and a many more times faster in Random IO (IOPS).
This is my upgrade plan:
Samsung 840 PRO 128GB: OS, Programs, Pagefile
Samsung 850 PRO 256GB: Cache, Cache Database, Previews
WD Caviar Blue 1TB: Media and Project Files
Existing Seagate 500GB: Raw Footage, Archive (at the moment installed but full)
External USB3 USB Flashdrive: Export (not going to use it every time)
This export has been an epic fail in terms of length... 60 hrs... Having only used before a ridiculously low spec-ed computer, when I built this one and exported just short clips, I thought it was normal...Guess it isn't, now that I have to edit long videos.
Thanks for all your entries,
-Gonzalo

Error while exporting a table - EXP-00091

I am doing an export of a table. The table has 1000838 rows. After the export is completed,
when I checked the log - it said
Connected to: Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.4.0 - Production
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table FIDA_LABEL 1000838 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.
I looked in the Oracle error messages document and found this out ---
EXP-00091 Exporting questionable statistics
Cause: Export was able to export statistics, but the statistics may not be useable. The statistics are questionable because one or more of the following happened during export: a row error occurred, client character set or NCHARSET does not match with the server, a query clause was specified on export, only certain partitions or subpartitions were exported, or a fatal error occurred while processing a table.
Action: To export non-questionable statistics, change the client character set or NCHARSET to match the server, export with no query clause, or export complete tables. If desired, import parameters can be supplied so that only non-questionable statistics will be imported, and all questionable statistics will be recalculated.
And this how my export command looks like -
exp vincent/passphr query=\"where state in $\'MD\',\'CA\',\'WI\'$\" file=$EXPDIR/fida_label_9i.dmp tables=vincent.fida_label
log=$LOGDIR/fida_label_exp.log
Ofcourse, I am using the query clause because I really need to and it has always worked when we were in the Oracle 8i environment. We recently moved to the 9i. And this happens in this 9i version...
And I certainly do not want to specify the import parameters to ignore the questionable statistics as no changes are desired in that area...(my hands are tied..).
What could " a fatal error occurred while processing a table " mean? And how can this be traced and troubleshooted ? Or how can I find out if any row errors occurred ? And if required, how do I check the character sets and other likes ?? (I have no idea in this area)
Thanks. All I needed was to get around this error. Your suggesions/responses would be highly appreciated

What version of Oracle 9i are you using? Do you have a standard 'NLS_LANG' environment variable set on client's machines? Or do you set it to different values on different machines?
Here is one of way you could get around it.
Could you specify the export parameter 'STATISTICS=NONE' while exporting the table data?
Try this and see.
If this is successful, you could use the import utility as usual. You could always compute or estimate statistics on the table after import.

MSI P35 Neo-F (MS-7360): Computer randomly freezes while playing games

Hi there,
I have reached the end of my technical knowledge right now and I'm not even sure if this area of the forum is appropriate. The problem:
While playing higher-end games like Crysis 2, Anno 1404, Mass Effect 2 etc. my computer randomly freezes and the last few milliseconds of sound are being looped on my speakers (kind of like a buzzing sound).
By "freezing" I mean that my computer becomes unresponsive to any action other than pressing the Reset-Button or holding down the Power-Up-Button (no reaction to Ctrl+Alt+Del, Alt+F4, Alt+Tab, no mouse movement... you get it).
There's no exact timing as to when these freezes occur. The fastest freeze happened after less than a minute of playing a game, slowes one (just today after switching to my newer case with better cooling) took about 2 hours.
This freeze only occurs while my System is under load. No freezes while browsing the web, using office programs, listening to music or watching videos.
System Specs:
Mainboard: MSI P35 Neo-F (MSI-7360)
CPU: Intel Core2Quad Q6600 @2.4GHz
RAM: 4x 1GB DDR2-800 Corsair XMS2
Graphics: Gainward GeForce GTX 560 Ti, 1GB GDDR5 VRAM
PSU: Antec High Current Gamer 620W (upgraded from Xilence XP600, 600W)
New CPU Cooler: Arctic Freezer 13 Pro (upgraded from OEM Intel Boxed Cooler)
New Case: Zalman Z9 Plus w/ 4x 120 mm Fans (Upgraded from a Case with only 1x 250mm side Fan)
2 Western Digital HDD (1x 2TB, 1x320 GB)
1 DVD Reader/Burner (unimportant for that error I guess)
OS: Windows 7 Ultimate 64-Bit
2 Screens: 1x 24" Asus VS248H and 1x 21" LG Flatron Wide W2240T
Since this error is bugging me for quite a while now and since this is not the first forum I'm trying to get help from, here's a list of steps i already took to get rid of it, obviously to no good use:
reinstalled games where the freeze occurred
updated all Drivers (including cleaning old versions in safe mode; also tried older drivers)
updated BIOS to v1.A0
Reinstalled Windows
bought new Case and CPU Cooler to improve Air Flow/Cooling
checked Seating of all components (took out, cleaned, reapplied thermal grease where neccessary, re-inserted)
cleaned old case of dust (obviously no problem in the new case, which is 2 days "old")
ran 7 sequences of Memtes86+ without any errors
ran Prime95 without any errors for about 45 Minutes
ran Furmark for 15 Minutes under full load (burn-in test) without any problems, even though my graphics card hit the 100°C frequency-cut level
ran Furmark and Prime95 simultaneously without any problems
took records of component temperatures and system voltages without noticing anything unusual (at least not after i switched to the newer PSU, which is about 1 Month old - yet didn't resolve the problem)
tested with cyclic removal of 1 RAM device to further rule out RAM malfunction
tested with only 2 RAM devices in dual channel mode (Slots 1 and 3)
tried to reduce RAM clock (800 MHz --> 667 MHz) to no avail
checked S.M.A.R.T. values of HDDs, no issues reported
tested without any background programs
raised/lowered voltages to RAM, CPU and Chipset in BIOS to increase logic circuit stability/decrease heat production
I need to mention: After I transferred my system to the new case, i was able to play longer than average compared to my old case. So I am guessing that improper cooling was part of the problem, yet improving cooling obviously didn't resolve it.
Since these freezes are really annoying and nobody could help me resolve this so far, I'm hoping to find some new ways of narrowing down the problem or even getting rid of it here.
Regards
Sebb

Quote from: Bernhard on 10-July-12, 13:15:30
Lets be realistic. A system with a 560TI is recommended to have a around 31Amps under full load, a CX500 would be sufficient.
Have you monitored your CPU and memory utilisation ?
As suggested before, test the GPU in another computer to see if the behaviour is the same.
Whew, I thought for a second there that my common sense had left me when I saw that 60-Amp-Post ^^
Yes, I monitored CPU and RAM usage, there is no recognizeable pattern to be seen and it almost never happens under full load.
I will see if a friend of mine can test my GPU on his computer, and I will test it underclocked right away.
Though one more question regarding that: Should I only underclock GPU Core Clock or both Core and RAM clock?

Error while exporting BIBean report

I am getting following error while exporting bibean report. Can anyone tell me what is the issue?
Mon Jun 20 18:18:09 IST 2005 PROBLEM: In oracle.dss.persistence.administration.Export::StorageManager InitializeStorageManager(String classname, Hashtable env): BIB-14418 Loaded storagemanager: oracle.dss.persistence.storagemanager.bi.BISto rageManagerImpl
Mon Jun 20 18:18:14 IST 2005 PROBLEM: In oracle.dss.persistence.administration.Export::boolean ExportFolder(StorageManager storageManager, Attributes filterAttr s, Writer out, XMLBranch parent, Hashtable exportedNamedObjects, idHolder id) throws PersistenceManagerCancelException: BIB-14412 No access to object named: Dem o1.
Mon Jun 20 18:18:14 IST 2005 PROBLEM: In oracle.dss.persistence.administration.Export::fireAfterEvent(): Warning: Out of events

BIB-14412 refers to possible circular references. As you already have a posting relating to errors with a custom measure, I suspect the two errors are related. The custom measure definition is probably causing the export process to fail.
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation

Error while exporting schema.

Hi All,
Today i have encountered a strange error while exporting one of our scehma as backup, below is the detailed description of the error, Please help me out ASAP.
Exporting database links
Exporting Sequence numbers
Exporting cluster definitions
EXP-00056: ORACLE error 4045 encountered
ORA-04045: error during recompilation/revalidation of SYS.KU$_XMLSCHEMA_VIEW
ORA-22973: Size of object identifier exceeds maximum size allowed
EXP-00000:Export terminated unsuccessfully
Thanks to all in advance.
Srini

Please post the exact command. See the thread Re: Export Error
Rgds
Edited by: virendra.k on Aug 20, 2009 1:33 PM

Freezing while exporting out of premeire cs6?

Similar Messages

Maybe you are looking for