Freezong after boot-up, Error 10 on 8.6 OS, on beige G3
I was printing a photoshop doc when G3 froze. I did a keyboard restart and now am crashing each time I restart. It appears to boot normally, but a few seconds after desktop appears everything freezes except I still can move my mouse.
I get the bomb icon with the suggestion to start with extensions off. That doesn't produce a different result. Tried booting from two startup CD's, while holding down "C", but it won't boot off a CD. The CD spins but G3 still boots off the HD. Finally had to turn off the power. What can I try next?
Thanks
When a Beige G3 start giving boot problems, the first thing to think is PRAM battery. The Beige PRAM battery affects more than just data and time. When the battery goes, the computer can forget what devices are attached and where the boot partition is located.
Here is a good site for info on Mac batteries:
http://www.academ.com/info/macintosh/
Radio Shack sells the correct battery as part number 23-026 but they are up to around US$15. Batteries are cheaper online; I buy mine here because they charge only US$6.88 and pay shipping even if you buy only one:
Operation Headgap Systems
Similar Messages
-
Reformatting HD after boot camp error
Okay, I was trying to install windows 7 along w/ snow leopard on my 13" macbook pro with bootcamp, when in the middle of partitioning my drive I got the error message "boot camp disk cannot be partitioned because some files cannot be moved."
so i read up on different forums, so I accepted the fact I needed to backup all of my data and restore it. So I went out and bought a HD ($50 for a 320GB - not bad) during black friday and I backed up all of my data through time machine.
So my questions is, what do I do now? do I open up the disk utility and reformat it to a single drive Mac OS Extended Journaled. Or, I heard somewhere you put in your installation CD for mac OS and press 'c' or something. so I'm quite confused on that
Lastly, I was wondering how exactly I was going to restore my data? isn't time machine designed so whenever you plug it in it starts backing up your most current settings, files, config? so do I drag and drop what is in my external HD to the mac HD or what?
any advice is appreciated
thanksBoot from the MacOSX install DVD by holding down 'C' when booting. Use the option to restore from backup.
Use Boot Camp Assistant to remove an old Boot Camp partition. Follow up with Disk Utility's 'zero free space' option to remove the free space debris which is blocking the next use of Boot Camp Assistant's partitioner. -
From results.xml:
<?xml version="1.0"?>
<Results><Errors>8</Errors><Warnings>0</Warnings><RetVal>-2147467259</RetVal><DeploymentType>CUSTOM</DeploymentType><Messages><![CDATA[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Apply Windows PE.
Unknown error (Error: 00001550; Source: Unknown)
The execution of the group (Capture Image) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Apply Windows PE. Execution of task sequence failed.
Unknown error (Error: 00001550; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]></Messages></Results>
I have not only regenerated my boot files while updating my deployment share, I have completely rebuilt the MDT 2012 deployment share from scratch, and I'm still getting the exact same errors. I can't figure out what is causing this. The only hits for these
errors seemed to say that the -214... error is likely related to a missing file, but I don't know how to figure out what that might be. I don't know what the FAILURE ( 5456 ) could be caused by, either, although it seems to be related to not knowing what partition
should be imaged or imaged to. I haven't been able to find any reference to MDT needing a partition to image from/to set in a CS.ini property or in a task variable.
I am running a modified version of the Sysprep and Capture Task Sequence (set up as described at http://bjtechnews.org/2012/06/01/mdt-2012-capturing-a-reference-image-part-ii/, it's basically the default settings for that TS with the sysprep step disabled and
the "Set Image Folder" task variable created per that post--I ran sysprep myself, manually, on the machine before shutting it down to boot from USB) after booting a Dell Latitude 10 tablet from a USB drive created by extracting the contents of the
MDT 2012 DeploymentShare$\Boot\LiteTouchpe_x86.iso to a FAT32-formatted volume.Here is the second part of BDD.log:
<![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[No Windows PE image to delete.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Checking mapped network drive.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Disconnecting drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Y: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up C:\MININT directory.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="21:18:44.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Not Wizard = False]LOG]!><time="00:44:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = N]LOG]!><time="00:44:07.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[ Open Control File: TaskSequences]LOG]!><time="00:44:08.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[CleanStartItems Complete]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #2" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #1, Partition #0" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE1"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives = C:]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Not Wizard = False]LOG]!><time="00:54:54.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = N]LOG]!><time="00:54:55.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[ Open Control File: TaskSequences]LOG]!><time="00:54:56.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceID is now = CAPTURE001]LOG]!><time="00:55:00.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@type='BDD_InstallOS']]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@type='BDD_InstallOS'] = False]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Task Sequence does not contain an OS and does not contain a LTIApply.wsf step, possibly a Custom Step or a Client Replace.]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[DeploymentType = CUSTOM]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageProcessor is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property OSGUID is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceName is now = Capture reference image]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceVersion is now = 1.0]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceTemplate is now = CaptureOnly.xml]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property OSGUID is now = {9c976969-ab45-405b-82e7-d8a429228a67}]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageIndex is now = 1]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageSize is now = 7934]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageFlags is now = Professional]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageBuild is now = 6.2.9200.16384]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageProcessor is now = x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageLanguage001 is now = en-US]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[InstallFromPath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86\Sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property InstallFromPath is now = \\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[SourcePath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property SourcePath is now = \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@type='BDD_InstallRoles']]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@type='BDD_InstallRoles'] = ]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']]]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']] = ]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:32.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:33.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TSGuid is now = {ed8ed1ac-ab1a-448d-97b5-0d4cb1f7ef95}]LOG]!><time="00:55:38.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property OSGUID is now = ]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property DeploymentType is now = CUSTOM]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property DoCapture is now = YES]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ComputerBackupLocation is now = \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property BackupFile is now = CAPTURE001.wim]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = Y]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Setting variable ComputerBackupLocation to value \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property ComputerBackupLocation is now = \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:46.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Setting variable ImageBuild to value 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property ImageBuild is now = 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:48.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Setting variable ImageFlags to value %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property ImageFlags is now = %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:50.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Setting variable PHASE to value STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property PHASE is now = STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:52.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[---------------- Initialization ----------------]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Found: DestinationDisk: 0]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Found: DestinationPartition: 1]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Destination Logical Drive was not specificed, defaulting to #:\]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Looking for Sysprep.inf in #:\sysprep\Sysprep.inf]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[The sysprep.inf file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Property OSDAnswerFilePathSysprep is now = ]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[The unattend.txt file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Found unattend.xml at \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml, will copy to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Copied \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Property OSDAnswerFilePath is now = C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Loaded C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for ComputerName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OrgName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for ProductKey]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinDomain]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for MachineObjectOU]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for DomainAdmin]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for InputLocale]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Language]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LanguageGroup]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for SystemLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for TimeZone]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoLogon]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoLogonCount]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for BitsPerPel]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Xresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Yresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Vrefresh]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AreaCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for CountryCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Dialing]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LongDistanceAccess]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Home_Page]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoMode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoUsers]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UpgradeData/Upgrade not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OSDComputerName]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for ProductKey]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed parent of //settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UserData/ProductKey/Key from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/ProductKey from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinDomain]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-UnattendedJoin"]/Identification/MachineObjectOU from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for DomainAdmin]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for DomainAdminDomain]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with InstallFromPath=\\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim (value was .\Operating Systems\Windows 8 Pro x86\Sources\install.wim)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/ImageInstall/OSImage/InstallFrom/MetaData[Key="/image/index"]/Value not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageIndex=1 (value was 1)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[//settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/UserAccounts/LocalAccounts not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Organization]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for BitsPerPel]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Xresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Yresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Vrefresh]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AreaCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for CountryCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Home_Page]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OrgName]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OrgName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with DestinationDisk=0 (value was 0)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with DestinationPartition=1 (value was 1)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Rewrote C:\MININT\Unattend.xml with changes]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[ZTIConfigure COMPLETED. Return Value = 0]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[ZTIConfigure processing completed successfully.]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Event 41001 sent: ZTIConfigure processing completed successfully.]LOG]!><time="00:56:05.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Will boot into Windows PE architecture x86 to match OS being deployed.]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Found: DestinationDisk: 0]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Found: DestinationPartition: 1]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="3" thread="" file="LTIApply">
<![LOG[Event 41002 sent: FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:08.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Removing AutoAdminLogon registry entries]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[No Windows PE image to delete.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Checking mapped network drive.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Z: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Disconnecting drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up C:\MININT directory.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:56:15.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> -
R61 R&R won't start after "unmountable boot volume" error
Hello all,
New user, first post - after problem, of course.
I have an R61 Thinkpad with Windows XP on it. (SP2 or SP3, not sure). Has worked flawlessly for years, then the other day I got the dreaded "unmountable boot volume" error and it would not start.
No problem - I re-start, hit the ThinkVantage button, then hit F11 to use the R&R hidden on a separate partition of the hard drive........I get the black screen with the big progress bar, ok, then a blue screen......then nothing. Hangs up and sits there. I have repeated this about 5 times now.
No problem! - I was smart enough to make an R&R CD set a while ago! Put the primary R&R disk in the CD drive, start the machine, ThinkPad button, F12 this time to choose boot from CD.....much CD activity ensues and I once again get the black screen with the big progress bar. It takes much longer, and I get teh blue screen - BUT - then it goes one extra step to display the "ThinkVantage Rescue & Recovery 4" screen with the life preserver image.
Excellent, I thing - except it then hangs there. Just sits there. No disk activity. No keys will do anything.
I can find no threads here or on any other forum with this particular issue.
Am I fubar? Or is there something else I can do?
Thanks a bunch.
Solved!
Go to Solution.Hi jim, welcome to the forums,
Is the hard drive recognised in BIOS, was there an entry in the boot list against HDD0?
Regardless of it being shown in BIOS / boot list or not, the first thing I would do is to reseat the hard drive and see if that helps, maybe over time it's lost contact to the mainboard socket. If you don't know how to do this you can find out at the R61 movies site.
The next thing I would do is run a hard drive diagnosis check from a bootable cd, these can be downloaded from all HDD manufacturer's websites e.g. Hitachi's Drive Fitness Test. It may be that the drive has simply gone bad after all those years of work.
Let us know how you get on
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Hp mini 110 boot disk error after installing new hard drive and system recovery
Need help, HP mini 110 Windows 7 32 bit. using my recovery disks I created i was able to recover to the old 160 gb hard drive. After I installed new 320 Gig drive and used my recovery disks i now get boot disk error. Looks like system was installed on new drive. but will not boot to complete set up.
If you use the recovery disk, your machine will restore to its default factory state. Try to reinstall the 320 GB you have if you want it to get back.
Can't get enough of this Envy... -
My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry -
I'm having an issue where the display fails after boot, and displays only a fixed noise pattern. The screen looks completely normal through POST, GRUB, and when initially loading the kernel, when the display is still in a text mode. After that, the screen goes black for a brief second, after which it returns displaying the mentioned noise pattern. The system appears unresponsive after this, and the only option is to shut down the system with the power button.
Adding nomodeset or vga=794 to the kernel options resolves the issue. That is a temporary fix IMHO; I'd prefer something sturdier, which is my reason for posting. The issue appeared after a pacman -Syu about a week ago, I just haven't had time to look at it until now.
I've added i915 to MODULES in mkinitcpio.conf and rebuilt as described here in an attempt to fix it, but it did not seem to have any effect.
I believe this may be a KMS or a driver issue, but I do not know how to confirm or troubleshoot it. I would be grateful if anyone could shed some light on the issue, or point me in the right direction to find out what's causing the issue. Please let me know if any more logs should be attached. I'll try to attach a picture of the screen as well as a dmesg output from the failed startup later.
lshw:
toasty
description: Notebook
product: 64665WG
vendor: LENOVO
version: ThinkPad T61
serial: L3D7847
width: 64 bits
capabilities: smbios-2.4 dmi-2.4 ldt16 vsyscall32
configuration: administrator_password=disabled boot=normal chassis=notebook family=ThinkPad T61 frontpanel_password=unknown keyboard_password=disabled power-on_password=disabled uuid=DDF8B081-4A90-11CB-8172-A970EC5BB61F
*-core
description: Motherboard
product: 64665WG
vendor: LENOVO
physical id: 0
version: Not Available
serial: VF1GA83J1A4
*-firmware
description: BIOS
vendor: LENOVO
physical id: 0
version: 7LETB2WW (2.12 )
date: 02/20/2008
size: 128KiB
capacity: 4032KiB
capabilities: pci pcmcia pnp upgrade shadowing escd cdboot bootselect socketedrom edd acpi usb biosbootspecification
*-cpu
description: CPU
product: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
vendor: Intel Corp.
physical id: 6
bus info: cpu@0
version: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
slot: None
size: 1600MHz
capacity: 2001MHz
width: 64 bits
clock: 200MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida dtherm tpr_shadow vnmi flexpriority cpufreq
*-cache:0
description: L1 cache
physical id: a
slot: Internal L1 Cache
size: 64KiB
capacity: 64KiB
capabilities: synchronous internal write-back instruction
*-cache:1
description: L2 cache
physical id: c
slot: Internal L2 Cache
size: 2MiB
capacity: 2MiB
capabilities: burst internal write-back unified
*-cache
description: L1 cache
physical id: b
slot: Internal L1 Cache
size: 64KiB
capacity: 64KiB
capabilities: synchronous internal write-back data
*-memory
description: System Memory
physical id: 2b
slot: System board or motherboard
size: 3GiB
*-bank:0
description: SODIMM DDR2 Synchronous 667 MHz (1,5 ns)
physical id: 0
slot: DIMM 1
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:1
description: SODIMM DDR2 Synchronous 667 MHz (1,5 ns)
physical id: 1
slot: DIMM 2
size: 2GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-pci
description: Host bridge
product: Mobile PM965/GM965/GL960 Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 0c
width: 32 bits
clock: 33MHz
*-display:0
description: VGA compatible controller
product: Mobile GM965/GL960 Integrated Graphics Controller (primary)
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 0c
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:45 memory:f8100000-f81fffff memory:e0000000-efffffff ioport:1800(size=8)
*-display:1 UNCLAIMED
description: Display controller
product: Mobile GM965/GL960 Integrated Graphics Controller (secondary)
vendor: Intel Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: 0c
width: 64 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: latency=0
resources: memory:f8200000-f82fffff
*-network
description: Ethernet interface
product: 82566MM Gigabit Network Connection
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
logical name: eth0
version: 03
serial: 00:1c:25:7c:64:7b
capacity: 1Gbit/s
width: 32 bits
clock: 33MHz
capabilities: pm msi cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=0.3-0 latency=0 link=no multicast=yes port=twisted pair
resources: irq:49 memory:fe000000-fe01ffff memory:fe025000-fe025fff ioport:1840(size=32)
*-usb:0
description: USB controller
product: 82801H (ICH8 Family) USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:20 ioport:1860(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.15.1-1-ARCH uhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 3.15
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:0
description: Bluetooth wireless interface
product: BCM2045B
vendor: Broadcom Corp
physical id: 1
bus info: usb@1:1
version: 1.00
capabilities: bluetooth usb-2.00
configuration: driver=btusb speed=12Mbit/s
*-usb:1 UNCLAIMED
description: Generic USB device
product: Biometric Coprocessor
vendor: STMicroelectronics
physical id: 2
bus info: usb@1:2
version: 0.01
capabilities: usb-1.00
configuration: maxpower=100mA speed=12Mbit/s
*-usb:1
description: USB controller
product: 82801H (ICH8 Family) USB UHCI Controller #5
vendor: Intel Corporation
physical id: 1a.1
bus info: pci@0000:00:1a.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci
configuration: driver=uhci_hcd latency=0
resources: irq:21 ioport:1880(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.15.1-1-ARCH uhci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 3.15
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:2
description: USB controller
product: 82801H (ICH8 Family) USB2 EHCI Controller #2
vendor: Intel Corporation
physical id: 1a.7
bus info: pci@0000:00:1a.7
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:22 memory:fe226c00-fe226fff
*-usbhost
product: EHCI Host Controller
vendor: Linux 3.15.1-1-ARCH ehci_hcd
physical id: 1
bus info: usb@6
logical name: usb6
version: 3.15
capabilities: usb-2.00
configuration: driver=hub slots=4 speed=480Mbit/s
*-multimedia
description: Audio device
product: 82801H (ICH8 Family) HD Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 03
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:47 memory:fe020000-fe023fff
*-pci:0
description: PCI bridge
product: 82801H (ICH8 Family) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:40 ioport:2000(size=4096) memory:fc000000-fdffffff ioport:f8000000(size=1048576)
*-pci:1
description: PCI bridge
product: 82801H (ICH8 Family) PCI Express Port 2
vendor: Intel Corporation
physical id: 1c.1
bus info: pci@0000:00:1c.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:41 ioport:3000(size=4096) memory:dc000000-df3fffff ioport:dfe00000(size=1048576)
*-network
description: Wireless interface
product: PRO/Wireless 3945ABG [Golan] Network Connection
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 02
serial: 00:1f:3c:28:8e:0d
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwl3945 driverversion=3.15.1-1-ARCH firmware=15.32.2.9 ip=192.168.1.12 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg
resources: irq:48 memory:df3ff000-df3fffff
*-pci:2
description: PCI bridge
product: 82801H (ICH8 Family) PCI Express Port 3
vendor: Intel Corporation
physical id: 1c.2
bus info: pci@0000:00:1c.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:42 ioport:4000(size=4096) memory:d8000000-d9ffffff ioport:dfb00000(size=1048576)
*-pci:3
description: PCI bridge
product: 82801H (ICH8 Family) PCI Express Port 4
vendor: Intel Corporation
physical id: 1c.3
bus info: pci@0000:00:1c.3
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:43 ioport:5000(size=4096) memory:d4000000-d5ffffff ioport:df800000(size=1048576)
*-pci:4
description: PCI bridge
product: 82801H (ICH8 Family) PCI Express Port 5
vendor: Intel Corporation
physical id: 1c.4
bus info: pci@0000:00:1c.4
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:44 ioport:6000(size=4096) memory:d0000000-d1ffffff ioport:df500000(size=1048576)
*-usb:3
description: USB controller
product: 82801H (ICH8 Family) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci
configuration: driver=uhci_hcd latency=0
resources: irq:16 ioport:18a0(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.15.1-1-ARCH uhci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 3.15
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:4
description: USB controller
product: 82801H (ICH8 Family) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci
configuration: driver=uhci_hcd latency=0
resources: irq:17 ioport:18c0(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.15.1-1-ARCH uhci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 3.15
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:5
description: USB controller
product: 82801H (ICH8 Family) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci
configuration: driver=uhci_hcd latency=0
resources: irq:18 ioport:18e0(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.15.1-1-ARCH uhci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 3.15
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:6
description: USB controller
product: 82801H (ICH8 Family) USB2 EHCI Controller #1
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:19 memory:fe227000-fe2273ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 3.15.1-1-ARCH ehci_hcd
physical id: 1
bus info: usb@7
logical name: usb7
version: 3.15
capabilities: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-pci:5
description: PCI bridge
product: 82801 Mobile PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: f3
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
resources: ioport:7000(size=16384) memory:f8300000-fbffffff ioport:f4000000(size=67108864)
*-pcmcia
description: CardBus bridge
product: RL5c476 II
vendor: Ricoh Co Ltd
physical id: 0
bus info: pci@0000:15:00.0
version: ba
width: 64 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128
resources: iomemory:b01716150-b0171614f irq:16 memory:f8300000-f8300fff ioport:7000(size=256) ioport:7400(size=256) memory:f4000000-f7ffffff memory:c0000000-c3ffffff
*-firewire
description: FireWire (IEEE 1394)
product: R5C832 IEEE 1394 Controller
vendor: Ricoh Co Ltd
physical id: 0.1
bus info: pci@0000:15:00.1
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=2
resources: irq:17 memory:f8301000-f83017ff
*-generic:0
description: SD Host controller
product: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
vendor: Ricoh Co Ltd
physical id: 0.2
bus info: pci@0000:15:00.2
version: 21
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=sdhci-pci latency=64
resources: irq:18 memory:f8301800-f83018ff
*-generic:1
description: System peripheral
product: R5C592 Memory Stick Bus Host Adapter
vendor: Ricoh Co Ltd
physical id: 0.4
bus info: pci@0000:15:00.4
version: 11
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=r592 latency=64
resources: irq:18 memory:f8302000-f83020ff
*-generic:2
description: System peripheral
product: xD-Picture Card Controller
vendor: Ricoh Co Ltd
physical id: 0.5
bus info: pci@0000:15:00.5
version: 11
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=r852 latency=64
resources: irq:18 memory:f8302400-f83024ff
*-isa
description: ISA bridge
product: 82801HEM (ICH8M-E) LPC Interface Controller
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-ide
description: IDE interface
product: 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@0000:00:1f.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=ata_piix latency=0
resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:1c00(size=16)
*-storage
description: SATA controller
product: 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 03
width: 32 bits
clock: 66MHz
capabilities: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
resources: irq:46 ioport:1c50(size=8) ioport:1c44(size=4) ioport:1c48(size=8) ioport:1c40(size=4) ioport:1c20(size=32) memory:fe226000-fe2267ff
*-serial
description: SMBus
product: 82801H (ICH8 Family) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 03
width: 32 bits
clock: 33MHz
configuration: driver=i801_smbus latency=0
resources: irq:23 memory:fe227400-fe2274ff ioport:1c60(size=32)
*-battery
product: 92P1131
vendor: SANYO
physical id: 1
slot: Rear
capacity: 71280mWh
configuration: voltage=10,8V
UPDATE:
The pattern appears for a few seconds before the screen goes completely black.
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6ba82705-70eb-4c55-baeb-0ae928385e41 ro quiet 3 processor.max_cstate=3
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be6affff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be6b0000-0x00000000be6cbfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000be6cc000-0x00000000be6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be700000-0x00000000beffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: LENOVO 64665WG/64665WG, BIOS 7LETB2WW (2.12 ) 02/20/2008
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xbe6b0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0BF000000 mask FFF000000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BE700000 mask FFFF00000 uncachable
[ 0.000000] 4 base 0BE800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f6900-0x000f690f] mapped at [ffff8800000f6900]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbe6affff]
[ 0.000000] [mem 0x00000000-0xbe5fffff] page 2M
[ 0.000000] [mem 0xbe600000-0xbe6affff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbe6affff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x37a10000-0x37cfffff]
[ 0.000000] ACPI: RSDP 00000000000f68d0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000be6bb74d 00094 (v01 LENOVO TP-7L 00002120 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000be6bb800 000F4 (v03 LENOVO TP-7L 00002120 LNVO 00000001)
[ 0.000000] ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20120913/tbfadt-567)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120913/tbfadt-598)
[ 0.000000] ACPI: DSDT 00000000be6bbc1d 0FF03 (v01 LENOVO TP-7L 00002120 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000be6e4000 00040
[ 0.000000] ACPI: SSDT 00000000be6bb9b4 00269 (v01 LENOVO TP-7L 00002120 MSFT 03000000)
[ 0.000000] ACPI: ECDT 00000000be6cbb20 00052 (v01 LENOVO TP-7L 00002120 LNVO 00000001)
[ 0.000000] ACPI: TCPA 00000000be6cbb72 00032 (v02 LENOVO TP-7L 00002120 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000be6cbba4 00068 (v01 LENOVO TP-7L 00002120 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000be6cbc0c 0003C (v01 LENOVO TP-7L 00002120 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000be6cbc48 00038 (v01 LENOVO TP-7L 00002120 LNVO 00000001)
[ 0.000000] ACPI: SLIC 00000000be6cbdf0 00176 (v01 LENOVO TP-7L 00002120 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000be6cbf66 00028 (v01 LENOVO TP-7L 00002120 LTP 00000001)
[ 0.000000] ACPI: ASF! 00000000be6cbf8e 00072 (v16 LENOVO TP-7L 00002120 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000be6e234d 0025F (v01 LENOVO TP-7L 00002120 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000be6e25ac 000A6 (v01 LENOVO TP-7L 00002120 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000be6e2652 004F7 (v01 LENOVO TP-7L 00002120 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000be6e2b49 001D8 (v01 LENOVO TP-7L 00002120 INTL 20050513)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000be6affff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbe6affff]
[ 0.000000] NODE_DATA [mem 0xbe6ac000-0xbe6affff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bae00000-ffff8800bddfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbe6affff]
[ 0.000000] On node 0 totalpages: 779837
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12123 pages used for memmap
[ 0.000000] DMA32 zone: 763733 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xbf000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800be400000 s84608 r8192 d21888 u1048576
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 767644
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6ba82705-70eb-4c55-baeb-0ae928385e41 ro quiet 3 processor.max_cstate=3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3055496k/3119808k available (4883k kernel code, 460k absent, 63852k reserved, 4030k data, 812k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12582912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1994.883 MHz processor
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.00 BogoMIPS (lpj=6649610)
[ 0.003345] pid_max: default: 32768 minimum: 301
[ 0.003411] Security Framework initialized
[ 0.003429] AppArmor: AppArmor disabled by boot time parameter
[ 0.004096] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009707] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011314] Mount-cache hash table entries: 256
[ 0.011743] Initializing cgroup subsys cpuacct
[ 0.011749] Initializing cgroup subsys memory
[ 0.011767] Initializing cgroup subsys devices
[ 0.011769] Initializing cgroup subsys freezer
[ 0.011772] Initializing cgroup subsys net_cls
[ 0.011775] Initializing cgroup subsys blkio
[ 0.011826] CPU: Physical Processor ID: 0
[ 0.011829] CPU: Processor Core ID: 0
[ 0.011833] mce: CPU supports 6 MCE banks
[ 0.011846] CPU0: Thermal monitoring enabled (TM2)
[ 0.011853] process: using mwait in idle threads
[ 0.011861] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.012032] Freeing SMP alternatives: 16k freed
[ 0.014357] ACPI: Core revision 20120913
[ 0.030022] ftrace: allocating 18793 entries in 74 pages
[ 0.043969] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078117] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
[ 0.079999] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.079999] perf_event_intel: PEBS disabled due to CPU errata
[ 0.079999] ... version: 2
[ 0.079999] ... bit width: 40
[ 0.079999] ... generic registers: 2
[ 0.079999] ... value mask: 000000ffffffffff
[ 0.079999] ... max period: 000000007fffffff
[ 0.079999] ... fixed-purpose events: 3
[ 0.079999] ... event mask: 0000000700000003
[ 0.103422] smpboot: Booting Node 0, Processors #1 OK
[ 0.116550] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.116555] Measured 1027940 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.116559] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.116688] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.116707] Brought up 2 CPUs
[ 0.116712] smpboot: Total of 2 processors activated (7982.01 BogoMIPS)
[ 0.118692] devtmpfs: initialized
[ 0.121214] PM: Registering ACPI NVS region [mem 0xbe6cc000-0xbe6fffff] (212992 bytes)
[ 0.121884] RTC time: 16:07:33, date: 02/11/13
[ 0.121966] NET: Registered protocol family 16
[ 0.121966] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.121966] ACPI: bus type pci registered
[ 0.121966] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.121966] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.130348] PCI: Using configuration type 1 for base access
[ 0.130570] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.130572] mtrr: probably your BIOS does not setup all CPUs.
[ 0.130575] mtrr: corrected configuration.
[ 0.133373] bio: create slab <bio-0> at 0
[ 0.133410] ACPI: Added _OSI(Module Device)
[ 0.133410] ACPI: Added _OSI(Processor Device)
[ 0.133410] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.133410] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.133410] ACPI: Added _OSI(Linux)
[ 0.135453] ACPI: EC: EC description table is found, configuring boot EC
[ 0.145385] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
[ 0.170056] ACPI: SSDT 00000000be6e1aef 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.171067] ACPI: Dynamic OEM Table Load:
[ 0.171073] ACPI: SSDT (null) 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.171422] ACPI: SSDT 00000000be6e1a6a 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.172356] ACPI: Dynamic OEM Table Load:
[ 0.172362] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.172394] ACPI: Interpreter enabled
[ 0.172394] ACPI: (supports S0 S3 S4 S5)
[ 0.172394] ACPI: Using IOAPIC for interrupt routing
[ 0.177412] ACPI: Power Resource [PUBS] (on)
[ 0.180918] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
[ 0.184454] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.184462] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.184462] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.184462] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.184462] PCI host bridge to bus 0000:00
[ 0.184462] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.184462] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.184462] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.184462] pci_bus 0000:00: root bus resource [mem 0xbf000000-0xfebfffff]
[ 0.184462] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[ 0.184462] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.184462] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[ 0.184462] pci 0000:00:02.0: reg 10: [mem 0xf8100000-0xf81fffff 64bit]
[ 0.184462] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.184462] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.184462] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[ 0.184462] pci 0000:00:02.1: reg 10: [mem 0xf8200000-0xf82fffff 64bit]
[ 0.184462] pci 0000:00:19.0: [8086:1049] type 00 class 0x020000
[ 0.184462] pci 0000:00:19.0: reg 10: [mem 0xfe000000-0xfe01ffff]
[ 0.184462] pci 0000:00:19.0: reg 14: [mem 0xfe025000-0xfe025fff]
[ 0.184462] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
[ 0.184462] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.184462] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.184588] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
[ 0.184699] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.184850] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
[ 0.184992] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.185046] pci 0000:00:1a.7: reg 10: [mem 0xfe226c00-0xfe226fff]
[ 0.185305] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.185386] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.185446] pci 0000:00:1b.0: reg 10: [mem 0xfe020000-0xfe023fff 64bit]
[ 0.185725] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.185810] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.186107] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.186189] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[ 0.186472] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.186563] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[ 0.186861] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.186951] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[ 0.187249] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.187340] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[ 0.187631] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.187718] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.187866] pci 0000:00:1d.0: reg 20: [io 0x18a0-0x18bf]
[ 0.187980] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.188132] pci 0000:00:1d.1: reg 20: [io 0x18c0-0x18df]
[ 0.188244] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.188389] pci 0000:00:1d.2: reg 20: [io 0x18e0-0x18ff]
[ 0.188540] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.188605] pci 0000:00:1d.7: reg 10: [mem 0xfe227000-0xfe2273ff]
[ 0.188893] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.188960] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.189213] pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100
[ 0.189448] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.189461] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.189471] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.189479] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.189488] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.189613] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[ 0.189656] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.189687] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.189719] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.189751] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.189782] pci 0000:00:1f.1: reg 20: [io 0x1c00-0x1c0f]
[ 0.189925] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 0.190005] pci 0000:00:1f.2: reg 10: [io 0x1c50-0x1c57]
[ 0.190036] pci 0000:00:1f.2: reg 14: [io 0x1c44-0x1c47]
[ 0.190068] pci 0000:00:1f.2: reg 18: [io 0x1c48-0x1c4f]
[ 0.190100] pci 0000:00:1f.2: reg 1c: [io 0x1c40-0x1c43]
[ 0.190131] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
[ 0.190160] pci 0000:00:1f.2: reg 24: [mem 0xfe226000-0xfe2267ff]
[ 0.190339] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.190403] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.190448] pci 0000:00:1f.3: reg 10: [mem 0xfe227400-0xfe2274ff]
[ 0.190562] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
[ 0.190820] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.190833] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.190845] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
[ 0.190863] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
[ 0.191139] pci 0000:03:00.0: [8086:4227] type 00 class 0x028000
[ 0.191201] pci 0000:03:00.0: reg 10: [mem 0xdf3ff000-0xdf3fffff]
[ 0.191653] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.200091] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.200100] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.200108] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff]
[ 0.200120] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.200236] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.200248] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.200260] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
[ 0.200280] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
[ 0.200446] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.200458] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.200470] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.200490] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
[ 0.200649] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.200661] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.200671] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff]
[ 0.200691] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
[ 0.200808] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
[ 0.200862] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 0.200865] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
[ 0.200907] pci 0000:15:00.0: reg 10: [mem 0xf8300000-0xf8300fff]
[ 0.201003] pci 0000:15:00.0: supports D1 D2
[ 0.201008] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.201070] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
[ 0.201128] pci 0000:15:00.1: reg 10: [mem 0xf8301000-0xf83017ff]
[ 0.201392] pci 0000:15:00.1: supports D1 D2
[ 0.201396] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.201459] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
[ 0.201517] pci 0000:15:00.2: reg 10: [mem 0xf8301800-0xf83018ff]
[ 0.201781] pci 0000:15:00.2: supports D1 D2
[ 0.201785] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.201848] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
[ 0.201907] pci 0000:15:00.4: reg 10: [mem 0xf8302000-0xf83020ff]
[ 0.202168] pci 0000:15:00.4: supports D1 D2
[ 0.202172] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.202235] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
[ 0.202293] pci 0000:15:00.5: reg 10: [mem 0xf8302400-0xf83024ff]
[ 0.202554] pci 0000:15:00.5: supports D1 D2
[ 0.202558] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.202730] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.202742] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff]
[ 0.202755] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
[ 0.202775] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.202779] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.202784] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.202788] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.202793] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.202797] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.202801] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.202806] pci 0000:00:1e.0: bridge window [mem 0xbf000000-0xfebfffff] (subtractive decode)
[ 0.202810] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff] (subtractive decode)
[ 0.202916] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
[ 0.202927] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
[ 0.203040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.203194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.203241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.203286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.203337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.203398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.203450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.203867] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.204419] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.213100] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.213218] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.213338] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.213453] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.213566] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.213678] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.213795] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.213907] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.216702] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.216715] vgaarb: loaded
[ 0.216718] vgaarb: bridge control possible 0000:00:02.0
[ 0.216791] PCI: Using ACPI for IRQ routing
[ 0.217268] PCI: pci_cache_line_size set to 64 bytes
[ 0.217440] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.217445] e820: reserve RAM buffer [mem 0xbe6b0000-0xbfffffff]
[ 0.217631] NetLabel: Initializing
[ 0.217635] NetLabel: domain hash size = 128
[ 0.217637] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.217665] NetLabel: unlabeled traffic allowed by default
[ 0.217694] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.217700] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.217708] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.230023] Switching to clocksource hpet
[ 0.241152] pnp: PnP ACPI init
[ 0.241186] ACPI: bus type pnp registered
[ 0.241858] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.241863] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.241868] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.241878] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.241882] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.241886] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.241890] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.241894] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.241898] pnp 00:00: [mem 0x000dc000-0x000dbfff disabled]
[ 0.241902] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.241906] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.241910] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.241914] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.241918] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.241922] pnp 00:00: [mem 0x00100000-0xbeffffff]
[ 0.241926] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.241930] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.242062] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.242068] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.242073] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.242078] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.242083] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.242088] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.242093] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.242098] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.242103] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.242108] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.242113] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.242118] system 00:00: [mem 0x00100000-0xbeffffff] could not be reserved
[ 0.242124] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.242129] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.242138] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.242179] pnp 00:01: [bus 00-ff]
[ 0.242184] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.242188] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.242193] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.242197] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.242202] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.242206] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.242211] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.242215] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.242219] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.242223] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.242227] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.242232] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.242236] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.242240] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.242244] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.242248] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.242253] pnp 00:01: [mem 0xbf000000-0xfebfffff window]
[ 0.242257] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.242329] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.242400] pnp 00:02: [io 0x0010-0x001f]
[ 0.242405] pnp 00:02: [io 0x0090-0x009f]
[ 0.242409] pnp 00:02: [io 0x0024-0x0025]
[ 0.242413] pnp 00:02: [io 0x0028-0x0029]
[ 0.242417] pnp 00:02: [io 0x002c-0x002d]
[ 0.242421] pnp 00:02: [io 0x0030-0x0031]
[ 0.242424] pnp 00:02: [io 0x0034-0x0035]
[ 0.242428] pnp 00:02: [io 0x0038-0x0039]
[ 0.242432] pnp 00:02: [io 0x003c-0x003d]
[ 0.242441] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.242445] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.242449] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.242452] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.242456] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.242460] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.242464] pnp 00:02: [io 0x0050-0x0053]
[ 0.242468] pnp 00:02: [io 0x0072-0x0077]
[ 0.242472] pnp 00:02: [io 0x164e-0x164f]
[ 0.242476] pnp 00:02: [io 0x002e-0x002f]
[ 0.242479] pnp 00:02: [io 0x1000-0x107f]
[ 0.242483] pnp 00:02: [io 0x1180-0x11bf]
[ 0.242487] pnp 00:02: [io 0x0800-0x080f]
[ 0.242491] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.242495] pnp 00:02: [io 0x1600-0x165f]
[ 0.242499] pnp 00:02: [mem 0xf0000000-0xf3ffffff]
[ 0.242503] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.242507] pnp 00:02: [mem 0xfed14000-0xfed17fff]
[ 0.242511] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.242515] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.242519] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.242663] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.242668] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.242674] system 00:02: [io 0x1180-0x11bf] has been reserved
[ 0.242679] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.242684] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.242689] system 00:02: [io 0x1600-0x165f] could not be reserved
[ 0.242695] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.242700] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.242706] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.242711] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.242716] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.242721] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.242728] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.242791] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.242838] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.242855] pnp 00:04: [io 0x0000-0x000f]
[ 0.242859] pnp 00:04: [io 0x0080-0x008f]
[ 0.242863] pnp 00:04: [io 0x00c0-0x00df]
[ 0.242868] pnp 00:04: [dma 4]
[ 0.242913] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.242927] pnp 00:05: [io 0x0061]
[ 0.242969] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.242984] pnp 00:06: [io 0x00f0]
[ 0.243003] pnp 00:06: [irq 13]
[ 0.243052] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.243068] pnp 00:07: [io 0x0070-0x0071]
[ 0.243078] pnp 00:07: [irq 8]
[ 0.243119] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.243135] pnp 00:08: [io 0x0060]
[ 0.243140] pnp 00:08: [io 0x0064]
[ 0.243149] pnp 00:08: [irq 1]
[ 0.243194] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.243215] pnp 00:09: [irq 12]
[ 0.243258] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[ 0.243896] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.243949] pnp 00:0a: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
[ 0.244685] pnp: PnP ACPI: found 11 devices
[ 0.244689] ACPI: ACPI bus type pnp unregistered
[ 0.253426] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.253435] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.253445] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
[ 0.253454] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
[ 0.253466] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.253472] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.253481] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff]
[ 0.253490] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.253501] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.253507] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.253517] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
[ 0.253525] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
[ 0.253537] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.253543] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.253552] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.253560] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
[ 0.253572] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.253578] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.253587] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff]
[ 0.253595] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
[ 0.253611] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.253616] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.253621] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.253626] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.253634] pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
[ 0.253642] pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff]
[ 0.253647] pci 0000:15:00.0: BAR 13: assigned [io 0x7000-0x70ff]
[ 0.253652] pci 0000:15:00.0: BAR 14: assigned [io 0x7400-0x74ff]
[ 0.253657] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.253661] pci 0000:15:00.0: bridge window [io 0x7000-0x70ff]
[ 0.253670] pci 0000:15:00.0: bridge window [io 0x7400-0x74ff]
[ 0.253679] pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
[ 0.253688] pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff]
[ 0.253697] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.253703] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff]
[ 0.253713] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
[ 0.253721] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.253801] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.253811] pci 0000:00:1e.0: setting latency timer to 64
[ 0.253834] pci 0000:15:00.0: setting latency timer to 64
[ 0.253842] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.253847] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.253851] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.253856] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.253860] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.253864] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.253869] pci_bus 0000:00: resource 10 [mem 0xbf000000-0xfebfffff]
[ 0.253873] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4bfff]
[ 0.253877] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.253882] pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff]
[ 0.253886] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
[ 0.253891] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.253895] pci_bus 0000:03: resource 1 [mem 0xdc000000-0xdf3fffff]
[ 0.253900] pci_bus 0000:03: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.253904] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.253908] pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff]
[ 0.253913] pci_bus 0000:04: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref]
[ 0.253917] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
[ 0.253921] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff]
[ 0.253926] pci_bus 0000:05: resource 2 [mem 0xdf800000-0xdf8fffff 64bit pref]
[ 0.253930] pci_bus 0000:0d: resource 0 [io 0x6000-0x6fff]
[ 0.253935] pci_bus 0000:0d: resource 1 [mem 0xd0000000-0xd1ffffff]
[ 0.253939] pci_bus 0000:0d: resource 2 [mem 0xdf500000-0xdf5fffff 64bit pref]
[ 0.253943] pci_bus 0000:15: resource 0 [io 0x7000-0xafff]
[ 0.253948] pci_bus 0000:15: resource 1 [mem 0xf8300000-0xfbffffff]
[ 0.253952] pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.253956] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
[ 0.253961] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
[ 0.253965] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.253969] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.253973] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.253978] pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.253982] pci_bus 0000:15: resource 10 [mem 0xbf000000-0xfebfffff]
[ 0.253986] pci_bus 0000:15: resource 11 [mem 0xfed40000-0xfed4bfff]
[ 0.253991] pci_bus 0000:16: resource 0 [io 0x7000-0x70ff]
[ 0.253995] pci_bus 0000:16: resource 1 [io 0x7400-0x74ff]
[ 0.253999] pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref]
[ 0.254004] pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff]
[ 0.254070] NET: Registered protocol family 2
[ 0.255457] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.261656] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.262461] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.262588] TCP: reno registered
[ 0.262605] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.262669] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.262858] NET: Registered protocol family 1
[ 0.262887] pci 0000:00:02.0: Boot video device
[ 0.262954] pci 0000:00:1a.1: power state changed by ACPI to D0
[ 0.263064] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.263144] pci 0000:00:1d.2: power state changed by ACPI to D0
[ 0.263269] PCI: CLS 64 bytes, default 64
[ 0.263404] Unpacking initramfs...
[ 0.381385] Freeing initrd memory: 3008k freed
[ 0.383142] Simple Boot Flag at 0x35 set to 0x1
[ 0.383770] audit: initializing netlink socket (disabled)
[ 0.383796] type=2000 audit(1360598852.383:1): initialized
[ 0.406333] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.409592] VFS: Disk quotas dquot_6.5.2
[ 0.409682] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.410020] msgmni has been set to 5973
[ 0.410394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.410438] io scheduler noop registered
[ 0.410442] io scheduler deadline registered
[ 0.410500] io scheduler cfq registered (default)
[ 0.410773] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.411021] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.411259] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.411502] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.411743] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.411960] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.411970] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.412008] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.412012] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.412021] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.412055] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.412063] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.412096] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.412105] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.412144] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.412152] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.412275] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.412278] vesafb: scrolling: redraw
[ 0.412282] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.413060] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005000000, using 4032k, total 4032k
[ 0.470284] Console: switching to colour frame buffer device 160x50
[ 0.527327] fb0: VESA VGA frame buffer device
[ 0.527346] intel_idle: does not run on family 6 model 15
[ 0.527398] GHES: HEST is not enabled!
[ 0.527510] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.528201] Linux agpgart interface v0.103
[ 0.528345] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.535966] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.536026] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.536202] mousedev: PS/2 mouse device common for all mice
[ 0.536311] rtc_cmos 00:07: RTC can wake from S4
[ 0.536519] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.536558] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.536573] cpuidle: using governor ladder
[ 0.536576] cpuidle: using governor menu
[ 0.536664] drop_monitor: Initializing network drop monitor service
[ 0.536802] TCP: cubic registered
[ 0.537011] NET: Registered protocol family 10
[ 0.537302] NET: Registered protocol family 17
[ 0.537323] Key type dns_resolver registered
[ 0.537728] PM:The bug is known, and a patch has been submitted: https://bugs.freedesktop.org/show_bug.cgi?id=80151. There's been no update since friday, so I wonder what the current status is, or if it's up for review at all.
Does anyone know how we can be notified when this patch hits the kernel? -
My IPAD keeps restarting a few minutes after booting up. It keeps doing it again and again, after the same period of time. Grateful for any help!
If the above doesn't work, force iPad into Recovery Mode.
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
[Solved] HP Omen 15 - Slow SSD after IRQ 16 error
[EDIT]
Sorry for wasting everyone's time. It turned out that I had only tried installing nvidia/bumblebee without the nomodeset option..and apparently that didn't work properly for some reason.
So if anyone else runs into this problem here's the solution:
1) Boot your installation media with the 'nomodeset' kernel option (this is especially important for live images (fedora,ubuntu,...) which are completely unusable otherwise
2) With nomodeset still enabled, install the nvidia driver, bumblebee and bbswitch
4) Enable bumblebeed.service
3) remove the nomodeset option
Also I updated the microcode on the CPU, but as far as I could tell that didn't affect anything.
[/EDIT]
Hi everyone,
I bought a new HP Omen 15 laptop. In Windows everything runs fine, but on Linux I get an IRQ 16 error after which SSD reads become so painfully slow that the system becomes mostly unusable. This issue has been posted by someone on the Ubuntu forums, but nobody had a solution there.
Hopefully one of you will be able to help me, because right now I'm stuck on Windows for doing my work...and I get absolutely no joy out of that
Hardware:
i7-4710HQ
Nvidia GeForce GTX 860 and Intel® HD Graphics 4600
512GB Samsung XP941 SSD (M.2)
Currently the system dual-boots with Windows 8.1, secure boot disabled, using gummiboot on the windows UEFI partition.
The actual error that (I think) leads to the performance hit is
[ 13.608625] 0000000000000000 96859b6ad089d33d ffff88045f243e28 ffffffff8154fb74
[ 13.608632] 0000000000000000 ffff880083514e00 ffff88045f243e58 ffffffff810cd406
[ 13.608637] 000000013ffeb056 ffff880083514e00 0000000000000000 0000000000000010
[ 13.608643] Call Trace:
[ 13.608646] <IRQ> [<ffffffff8154fb74>] dump_stack+0x4e/0x71
[ 13.608665] [<ffffffff810cd406>] __report_bad_irq+0x36/0xd0
[ 13.608671] [<ffffffff810cd7b7>] note_interrupt+0x257/0x2a0
[ 13.608677] [<ffffffff810cacee>] handle_irq_event_percpu+0xae/0x1f0
[ 13.608682] [<ffffffff810cae71>] handle_irq_event+0x41/0x70
[ 13.608689] [<ffffffff810cdd47>] handle_fasteoi_irq+0x87/0x140
[ 13.608698] [<ffffffff81017362>] handle_irq+0x22/0x40
[ 13.608704] [<ffffffff815581b1>] do_IRQ+0x51/0xf0
[ 13.608711] [<ffffffff815561ad>] common_interrupt+0x6d/0x6d
[ 13.608714] <EOI> [<ffffffff81403aa5>] ? cpuidle_enter_state+0x65/0x1a0
[ 13.608730] [<ffffffff81403a91>] ? cpuidle_enter_state+0x51/0x1a0
[ 13.608737] [<ffffffff81403cc7>] cpuidle_enter+0x17/0x20
[ 13.608745] [<ffffffff810b3539>] cpu_startup_entry+0x3d9/0x460
[ 13.608752] [<ffffffff8104a994>] start_secondary+0x1b4/0x1f0
[ 13.608756] handlers:
[ 13.608809] [<ffffffffa0128410>] ahci_single_irq_intr [libahci]
[ 13.608873] Disabling IRQ #16
What's interesting is, that this problem does not occur if I set the 'nomodeset' kernel option. So probably it's somehow related to graphics. The performance drop is quite visible:
With nomodeset:
hdparm -Tt --verbose /dev/sda
/dev/sda:
Timing cached reads: 21006 MB in 2.00 seconds = 10513.48 MB/sec
Timing buffered disk reads: 2378 MB in 3.00 seconds = 792.36 MB/sec
...and without:
hdparm -Tt --verbose /dev/sda
/dev/sda:
Timing cached reads: 12274 MB in 2.00 seconds = 6140.85 MB/sec
Timing buffered disk reads: 8 MB in 3.20 seconds = 2.50 MB/sec
So just about 0.3% of the original speed.
The above information are form a fresh install without any additional packages installed. Installing nvidia/intel/bumblebee did not help either, so I've left it in the fresh state to be debuggable.
Here are various outputs from some commands that might be useful to determine the error source, let me know if you need anything else!
hdparm /dev/sda
/dev/sda:
multcount = 0 (off)
IO_support = 1 (32-bit)
readonly = 0 (off)
readahead = 256 (on)
geometry = 62260/255/63, sectors = 1000215216, start = 0
lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2)
07:00.0 SATA controller: Samsung Electronics Co Ltd XP941 PCIe SSD (rev 01)
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
09:00.0 Network controller: Intel Corporation Wireless 7260 (rev c3)
cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
0: 24 0 0 0 0 0 0 0 IR-IO-APIC-edge timer
1: 901 2 2 1 3 1 1 0 IR-IO-APIC-edge i8042
8: 1 0 0 0 0 0 0 0 IR-IO-APIC-edge rtc0
9: 199 49 37 75 13 25 6 18 IR-IO-APIC-fasteoi acpi
12: 4419 17 5 8 2 6 7 7 IR-IO-APIC-edge i8042
16: 3146 195401 312 395 353 184 102 108 IR-IO-APIC 16-fasteoi 0000:07:00.0
24: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar0
25: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar1
26: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
27: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
28: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
29: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
30: 6 1 2 9 1 0 1 2 IR-PCI-MSI-edge rtsx_pci
31: 574 190 28 34 154 29 11 7 IR-PCI-MSI-edge xhci_hcd
32: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge 0000:00:1f.2
33: 1 0 0 0 0 0 3 7 IR-PCI-MSI-edge mei_me
34: 5 138 79 0 5 76 10 0 IR-PCI-MSI-edge snd_hda_intel
35: 169 0 1 0 1 0 0 0 IR-PCI-MSI-edge i915
36: 17 3 2 7 6 14 2 11 IR-PCI-MSI-edge iwlwifi
37: 1 26 0 0 32 0 0 0 IR-PCI-MSI-edge snd_hda_intel
NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts
LOC: 958 2678 1069 355 1505 562 682 321 Local timer interrupts
SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 0 0 0 0 Performance monitoring interrupts
IWI: 1 1 0 1 0 0 0 0 IRQ work interrupts
RTR: 0 0 0 0 0 0 0 0 APIC ICR read retries
RES: 204 193 207 200 136 177 195 285 Rescheduling interrupts
CAL: 898 819 847 830 822 853 843 869 Function call interrupts
TLB: 10 6 8 3 4 7 3 5 TLB shootdowns
TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 2 2 2 2 Machine check polls
HYP: 0 0 0 0 0 0 0 0 Hypervisor callback interrupts
ERR: 0
MIS: 0
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.6-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/mapper/VolGroup00-lv_root rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c07efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c07f000-0x000000009ce7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x78e8e018-0x78ea7657] usable ==> usable
[ 0.000000] e820: update [mem 0x78e7d018-0x78e8d057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000078e7d017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078e7d018-0x0000000078e8d057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078e8d058-0x0000000078e8e017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078e8e018-0x0000000078ea7657] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078ea7658-0x000000009c07efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009c07f000-0x000000009ce7efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045f5fffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9ce7df18
[ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000007000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem05: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem06: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem07: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e3b000) (14MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e3b000-0x0000000078680000) (1896MB)
[ 0.000000] efi: mem10: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000078680000-0x00000000786a0000) (0MB)
[ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000786a0000-0x0000000078e7d000) (7MB)
[ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000078e7d000-0x0000000078ea8000) (0MB)
[ 0.000000] efi: mem13: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000078ea8000-0x000000007ace3000) (30MB)
[ 0.000000] efi: mem14: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000007ace3000-0x000000007b670000) (9MB)
[ 0.000000] efi: mem15: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b670000-0x000000007b67a000) (0MB)
[ 0.000000] efi: mem16: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007b67a000-0x000000007b67f000) (0MB)
[ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b67f000-0x000000007b865000) (1MB)
[ 0.000000] efi: mem18: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000007b865000-0x000000007b87f000) (0MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b87f000-0x000000007f7d2000) (63MB)
[ 0.000000] efi: mem20: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007f7d2000-0x000000008001a000) (8MB)
[ 0.000000] efi: mem21: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008001a000-0x0000000081106000) (16MB)
[ 0.000000] efi: mem22: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081106000-0x00000000815f5000) (4MB)
[ 0.000000] efi: mem23: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000815f5000-0x000000008161b000) (0MB)
[ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008161b000-0x0000000081659000) (0MB)
[ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081659000-0x00000000819e1000) (3MB)
[ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000819e1000-0x00000000819e2000) (0MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000819e2000-0x00000000819fe000) (0MB)
[ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000819fe000-0x0000000081a04000) (0MB)
[ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a04000-0x0000000081a0c000) (0MB)
[ 0.000000] efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081a0c000-0x0000000081a0d000) (0MB)
[ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a0d000-0x0000000081a38000) (0MB)
[ 0.000000] efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081a38000-0x0000000081a3a000) (0MB)
[ 0.000000] efi: mem33: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a3a000-0x0000000081b48000) (1MB)
[ 0.000000] efi: mem34: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081b48000-0x0000000081b49000) (0MB)
[ 0.000000] efi: mem35: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081b49000-0x0000000081bcc000) (0MB)
[ 0.000000] efi: mem36: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bcc000-0x0000000081bd4000) (0MB)
[ 0.000000] efi: mem37: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd4000-0x0000000081bd5000) (0MB)
[ 0.000000] efi: mem38: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bd5000-0x0000000081bd7000) (0MB)
[ 0.000000] efi: mem39: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd7000-0x0000000081bd8000) (0MB)
[ 0.000000] efi: mem40: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bd8000-0x0000000081bd9000) (0MB)
[ 0.000000] efi: mem41: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd9000-0x0000000081c1b000) (0MB)
[ 0.000000] efi: mem42: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c1b000-0x0000000081c1c000) (0MB)
[ 0.000000] efi: mem43: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c1c000-0x0000000081c20000) (0MB)
[ 0.000000] efi: mem44: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c20000-0x0000000081c22000) (0MB)
[ 0.000000] efi: mem45: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c22000-0x0000000081c2d000) (0MB)
[ 0.000000] efi: mem46: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c2d000-0x0000000081c30000) (0MB)
[ 0.000000] efi: mem47: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c30000-0x0000000081c52000) (0MB)
[ 0.000000] efi: mem48: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c52000-0x0000000081c53000) (0MB)
[ 0.000000] efi: mem49: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c53000-0x0000000081c76000) (0MB)
[ 0.000000] efi: mem50: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c76000-0x0000000081c77000) (0MB)
[ 0.000000] efi: mem51: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c77000-0x0000000081c78000) (0MB)
[ 0.000000] efi: mem52: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c78000-0x0000000081c7a000) (0MB)
[ 0.000000] efi: mem53: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c7a000-0x000000008387f000) (28MB)
[ 0.000000] efi: mem54: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008387f000-0x000000009bc0e000) (387MB)
[ 0.000000] efi: mem55: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009bc0e000-0x000000009c07f000) (4MB)
[ 0.000000] efi: mem56: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c07f000-0x000000009c47f000) (4MB)
[ 0.000000] efi: mem57: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c47f000-0x000000009c67f000) (2MB)
[ 0.000000] efi: mem58: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000009c67f000-0x000000009ce7f000) (8MB)
[ 0.000000] efi: mem59: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009ce7f000-0x000000009cf7f000) (1MB)
[ 0.000000] efi: mem60: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cf7f000-0x000000009cfff000) (0MB)
[ 0.000000] efi: mem61: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009cfff000-0x000000009d000000) (0MB)
[ 0.000000] efi: mem62: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000045f600000) (13814MB)
[ 0.000000] efi: mem63: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem64: [Reserved | | | | | | | | | ] range=[0x000000009d000000-0x000000009fa00000) (42MB)
[ 0.000000] efi: mem65: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem66: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
[ 0.000000] efi: mem67: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem68: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
[ 0.000000] efi: mem69: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem70: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed20000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem71: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ffb00000-0x0000000100000000) (5MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Hewlett-Packard HP OMEN Notebook PC 15/2332, BIOS F.09 12/27/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45f400000-0x45f5fffff]
[ 0.000000] [mem 0x45f400000-0x45f5fffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45f3fffff]
[ 0.000000] [mem 0x45c000000-0x45f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
[ 0.000000] [mem 0x400000000-0x43fffffff] page 1G
[ 0.000000] [mem 0x440000000-0x45bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9c07efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9bffffff] page 2M
[ 0.000000] [mem 0x9c000000-0x9c07efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7f7d2000-0x80019fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000F4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 0x000000009CFF7000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 0x000000009CFDB000 018700 (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000009CF67000 000040
[ 0.000000] ACPI: TCPA 0x000000009CFFD000 000032 (v02 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 0x000000009CFFA000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 0x000000009CFF9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 0x000000009CFF8000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 0x000000009CFF6000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 0x000000009CFF5000 00008C (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 0x000000009CFF4000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: WDAT 0x000000009CFDA000 000224 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD9000 0007F6 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x000000009CFD7000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: LPIT 0x000000009CFD6000 000094 (v01 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD5000 0003E1 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x000000009CFD4000 000034 (v07 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 0x000000009CFD3000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFCB000 000539 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFCA000 000AD8 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFC6000 003361 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFBE000 003FC4 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFC5000 00040A (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: WDTT 0x000000009CFC4000 000224 (v02 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFC3000 00006B (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x000000009CFC2000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: TPM2 0x000000009CFBD000 000044 (v03 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: DMAR 0x000000009CFBC000 0000A8 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x45f5fa000-0x45f5fdfff]
[ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044ec00000-ffff88045ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x45f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006efff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x9c07efff]
[ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] node 0: [mem 0x100000000-0x45f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x45f5fffff]
[ 0.000000] On node 0 totalpages: 4175366
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9922 pages used for memmap
[ 0.000000] DMA32 zone: 635008 pages, LIFO batch:31
[ 0.000000] Normal zone: 55256 pages used for memmap
[ 0.000000] Normal zone: 3536384 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78e7d000-0x78e7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78e8d000-0x78e8dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78e8e000-0x78e8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78ea7000-0x78ea7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c07f000-0x9ce7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88045f200000 s82880 r8192 d31808 u262144
[ 0.000000] pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4110103
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/mapper/VolGroup00-lv_root rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16285004K/16701464K available (5481K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 416460K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.211 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.27 BogoMIPS (lpj=8314036)
[ 0.000023] pid_max: default: 32768 minimum: 301
[ 0.000028] ACPI: Core revision 20140926
[ 0.014940] ACPI: All ACPI Tables successfully acquired
[ 0.048477] Security Framework initialized
[ 0.048484] Yama: becoming mindful.
[ 0.049168] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.051306] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.052245] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.052257] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.052448] Initializing cgroup subsys memory
[ 0.052452] Initializing cgroup subsys devices
[ 0.052454] Initializing cgroup subsys freezer
[ 0.052455] Initializing cgroup subsys net_cls
[ 0.052457] Initializing cgroup subsys blkio
[ 0.052472] CPU: Physical Processor ID: 0
[ 0.052473] CPU: Processor Core ID: 0
[ 0.052476] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.053226] mce: CPU supports 9 MCE banks
[ 0.053236] CPU0: Thermal monitoring enabled (TM1)
[ 0.053246] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.053323] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
[ 0.053911] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.055124] ftrace: allocating 20931 entries in 82 pages
[ 0.061596] dmar: Host address width 39
[ 0.061597] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.061601] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.061602] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.061605] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.061606] dmar: RMRR base: 0x0000009cd6f000 end: 0x0000009cd8efff
[ 0.061606] dmar: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff
[ 0.061670] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.061671] HPET id 0 under DRHD base 0xfed91000
[ 0.061671] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.061783] Enabled IRQ remapping in x2apic mode
[ 0.061784] Enabling x2apic
[ 0.061784] Enabled x2apic
[ 0.061789] Switched APIC routing to cluster x2apic.
[ 0.062206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.095245] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
[ 0.095250] TSC deadline timer enabled
[ 0.095266] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.095280] ... version: 3
[ 0.095281] ... bit width: 48
[ 0.095281] ... generic registers: 4
[ 0.095282] ... value mask: 0000ffffffffffff
[ 0.095283] ... max period: 0000ffffffffffff
[ 0.095283] ... fixed-purpose events: 3
[ 0.095284] ... event mask: 000000070000000f
[ 0.118723] x86: Booting SMP configuration:
[ 0.118724] .... node #0, CPUs: #1
[ 0.132727] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.139403] #2 #3 #4 #5 #6 #7
[ 0.253216] x86: Booted up 1 node, 8 CPUs
[ 0.253219] smpboot: Total of 8 processors activated (39923.18 BogoMIPS)
[ 0.259240] devtmpfs: initialized
[ 0.261225] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
[ 0.261788] pinctrl core: initialized pinctrl subsystem
[ 0.261821] RTC time: 15:05:14, date: 03/07/15
[ 0.261896] NET: Registered protocol family 16
[ 0.272461] cpuidle: using governor ladder
[ 0.285819] cpuidle: using governor menu
[ 0.285860] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.285861] ACPI: bus type PCI registered
[ 0.285863] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.285923] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.285925] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.286198] PCI: Using configuration type 1 for base access
[ 0.299479] ACPI: Added _OSI(Module Device)
[ 0.299481] ACPI: Added _OSI(Processor Device)
[ 0.299482] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.299483] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.302912] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.305266] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.306241] ACPI: Dynamic OEM Table Load:
[ 0.306250] ACPI: SSDT 0xFFFF880448503800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20131115)
[ 0.319415] ACPI: Dynamic OEM Table Load:
[ 0.319425] ACPI: SSDT 0xFFFF8804485D2000 0005AA (v01 PmRef ApIst 00003000 INTL 20131115)
[ 0.332651] ACPI: Dynamic OEM Table Load:
[ 0.332660] ACPI: SSDT 0xFFFF88044858EE00 000119 (v01 PmRef ApCst 00003000 INTL 20131115)
[ 0.384073] ACPI: Interpreter enabled
[ 0.384081] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.384088] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.384107] ACPI: (supports S0 S3 S4 S5)
[ 0.384108] ACPI: Using IOAPIC for interrupt routing
[ 0.384130] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.388473] ACPI: Power Resource [PG00] (on)
[ 0.390539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.390543] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.390880] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.391231] PCI host bridge to bus 0000:00
[ 0.391233] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.391234] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.391236] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.391237] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.391237] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.391238] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.391239] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.391240] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.391241] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.391242] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.391243] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.391244] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.391245] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.391246] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.391247] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.391248] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.391248] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.391249] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.391255] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.391363] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.391390] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.391467] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.391495] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.391503] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit]
[ 0.391507] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.391511] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.391611] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.391617] pci 0000:00:03.0: reg 0x10: [mem 0xd1710000-0xd1713fff 64bit]
[ 0.391739] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.391754] pci 0000:00:14.0: reg 0x10: [mem 0xd1700000-0xd170ffff 64bit]
[ 0.391806] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.391878] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.391904] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.391922] pci 0000:00:16.0: reg 0x10: [mem 0xd1718000-0xd171800f 64bit]
[ 0.391977] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.392081] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.392094] pci 0000:00:1b.0: reg 0x10: [mem 0xd1714000-0xd1717fff 64bit]
[ 0.392153] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.392226] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.392251] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.392316] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.392392] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.392418] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 0.392477] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.392552] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.392576] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.392635] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.392713] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.392742] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[ 0.392924] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.392937] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.392943] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.392950] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.392956] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.392962] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.392968] pci 0000:00:1f.2: reg 0x24: [mem 0xd171b000-0xd171b7ff]
[ 0.393001] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.393092] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.393105] pci 0000:00:1f.3: reg 0x10: [mem 0xd1719000-0xd17190ff 64bit]
[ 0.393121] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.393269] pci 0000:01:00.0: [10de:1392] type 00 class 0x030200
[ 0.393285] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
[ 0.393301] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.393317] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 0.393328] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.393338] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.393417] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.399365] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.399367] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.399370] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.399373] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.399511] pci 0000:07:00.0: [144d:a800] type 00 class 0x010601
[ 0.399581] pci 0000:07:00.0: reg 0x24: [mem 0xd1600000-0xd1601fff]
[ 0.399611] pci 0000:07:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.399698] pci 0000:07:00.0: PME# supported from D3hot D3cold
[ 0.399751] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.406055] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.406061] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.406133] pci 0000:08:00.0: [10ec:5227] type 00 class 0xff0000
[ 0.406153] pci 0000:08:00.0: reg 0x10: [mem 0xd1500000-0xd1500fff]
[ 0.406285] pci 0000:08:00.0: supports D1 D2
[ 0.406286] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.406316] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.412720] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ 0.412725] pci 0000:00:1c.4: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.412836] pci 0000:09:00.0: [8086:08b1] type 00 class 0x028000
[ 0.412890] pci 0000:09:00.0: reg 0x10: [mem 0xd1400000-0xd1401fff 64bit]
[ 0.413128] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.413183] pci 0000:09:00.0: System wakeup disabled by ACPI
[ 0.419415] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.419420] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd14fffff]
[ 0.419464] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.420118] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420157] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420195] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420233] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420269] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420305] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420341] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420377] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420652] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.420689] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.420760] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.420762] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.420764] vgaarb: loaded
[ 0.420765] vgaarb: bridge control possible 0000:00:02.0
[ 0.420853] PCI: Using ACPI for IRQ routing
[ 0.425911] PCI: pci_cache_line_size set to 64 bytes
[ 0.425949] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.425950] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.425951] e820: reserve RAM buffer [mem 0x78e7d018-0x7bffffff]
[ 0.425952] e820: reserve RAM buffer [mem 0x78e8e018-0x7bffffff]
[ 0.425953] e820: reserve RAM buffer [mem 0x9c07f000-0x9fffffff]
[ 0.425954] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.425955] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
[ 0.426019] NetLabel: Initializing
[ 0.426020] NetLabel: domain hash size = 128
[ 0.426021] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.426028] NetLabel: unlabeled traffic allowed by default
[ 0.426041] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.426044] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.428075] Switched to clocksource hpet
[ 0.431534] pnp: PnP ACPI init
[ 0.431620] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.431622] system 00:00: [io 0xffff] has been reserved
[ 0.431623] system 00:00: [io 0xffff] has been reserved
[ 0.431624] system 00:00: [io 0xffff] has been reserved
[ 0.431625] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.431626] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.431628] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.431656] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.431658] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.431677] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.431703] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.431705] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.431750] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.431766] pnp 00:05: Plug and Play ACPI device, IDs SYN1ed8 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.431848] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.431849] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.431850] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.431852] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.431853] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.431854] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.431855] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.431856] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.431857] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.431858] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.431860] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.431861] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.432212] pnp: PnP ACPI: found 7 devices
[ 0.438072] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.438074] pci 0000:07:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.438102] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[ 0.438103] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.438105] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.438107] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.438109] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.438112] pci 0000:07:00.0: BAR 6: assigned [mem 0xd1610000-0xd161ffff pref]
[ 0.438113] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.438117] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.438123] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ 0.438127] pci 0000:00:1c.4: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.438133] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.438137] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd14fffff]
[ 0.438143] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.438144] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.438145] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.438146] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.438147] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.438148] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.438149] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.438150] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.438151] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.438152] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.438153] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.438154] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.438155] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.438156] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.438157] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.438158] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.438159] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
[ 0.438160] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.438161] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff]
[ 0.438161] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.438163] pci_bus 0000:07: resource 1 [mem 0xd1600000-0xd16fffff]
[ 0.438164] pci_bus 0000:08: resource 1 [mem 0xd1500000-0xd15fffff]
[ 0.438165] pci_bus 0000:09: resource 1 [mem 0xd1400000-0xd14fffff]
[ 0.438182] NET: Registered protocol family 2
[ 0.438329] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.438470] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.438574] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.438585] TCP: reno registered
[ 0.438597] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.438635] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.438690] NET: Registered protocol family 1
[ 0.438701] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.440063] PCI: CLS 64 bytes, default 64
[ 0.440092] Unpacking initramfs...
[ 0.535471] Freeing initrd memory: 8480K (ffff88007f7d2000 - ffff88008001a000)
[ 0.535494] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.535496] software IO TLB [mem 0x97c0e000-0x9bc0e000] (64MB) mapped at [ffff880097c0e000-ffff88009bc0dfff]
[ 0.535525] Simple Boot Flag at 0x44 set to 0x1
[ 0.535703] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.535742] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535747] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535753] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535759] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535764] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535770] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535775] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535781] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535821] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.535836] Scanning for low memory corruption every 60 seconds
[ 0.536021] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.536041] Initialise system trusted keyring
[ 0.536249] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.537029] zpool: loaded
[ 0.537031] zbud: loaded
[ 0.537161] VFS: Disk quotas dquot_6.5.2
[ 0.537181] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.537256] msgmni has been set to 31953
[ 0.537287] Key type big_key registered
[ 0.537431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.537471] io scheduler noop registered
[ 0.537473] io scheduler deadline registered
[ 0.537490] io scheduler cfq registered (default)
[ 0.537616] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
[ 0.537711] pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X
[ 0.537809] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 0.537906] pcieport 0000:00:1c.5: irq 29 for MSI/MSI-X
[ 0.537967] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.537968] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.537970] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.537981] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.537982] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 0.537986] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.537996] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.537997] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 0.538000] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.538010] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.538011] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[ 0.538014] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.538023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.538035] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.538055] efifb: probing for efifb
[ 0.538070] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 8100k, total 8100k
[ 0.538071] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.538071] efifb: scrolling: redraw
[ 0.538072] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.541482] Console: switching to colour frame buffer device 240x67
[ 0.544794] fb0: EFI VGA frame buffer device
[ 0.544800] intel_idle: MWAIT substates: 0x42120
[ 0.544801] intel_idle: v0.4 model 0x3C
[ 0.544801] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.545023] GHES: HEST is not enabled!
[ 0.545063] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.545351] Linux agpgart interface v0.103
[ 0.545389] rtc_cmos 00:02: RTC can wake from S4
[ 0.545490] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.545516] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.545524] Intel P-state driver initializing.
[ 0.545680] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.545994] TCP: cubic registered
[ 0.546216] NET: Registered protocol family 10
[ 0.546732] NET: Registered protocol family 17
[ 0.547560] Loading compiled-in X.509 certificates
[ 0.547591] registered taskstats version 1
[ 0.548780] Magic number: 7:609:82
[ 0.548952] rtc_cmos 00:02: setting system clock to 2015-03-07 15:05:15 UTC (1425740715)
[ 0.549136] PM: Hibernation image not present or could not be loaded.
[ 0.551123] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
[ 0.551126] Write protecting the kernel read-only data: 8192k
[ 0.555482] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
[ 0.557272] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
[ 0.570421] random: systemd-tmpfile urandom read with 5 bits of entropy available
[ 0.584356] device-mapper: uevent: version 1.0.3
[ 0.584470] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected]
[ 0.597541] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.602695] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.602710] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.603099] rtsx_pci 0000:08:00.0: irq 30 for MSI/MSI-X
[ 0.603111] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 30
[ 0.604239] ACPI: bus type USB registered
[ 0.604267] usbcore: registered new interface driver usbfs
[ 0.604273] SCSI subsystem initialized
[ 0.604279] usbcore: registered new interface driver hub
[ 0.604330] usbcore: registered new device driver usb
[ 0.605601] libata version 3.00 loaded.
[ 0.605678] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.605685] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.605779] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.605808] xhci_hcd 0000:00:14.0: irq 31 for MSI/MSI-X
[ 0.606024] hub 1-0:1.0: USB hub found
[ 0.606063] hub 1-0:1.0: 14 ports detected
[ 0.609623] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.609626] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.609780] hub 2-0:1.0: USB hub found
[ 0.609795] hub 2-0:1.0: 6 ports detected
[ 0.610944] ahci 0000:00:1f.2: version 3.0
[ 0.611066] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[ 0.611083] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.611102] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.611105] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 0.611516] scsi host0: ahci
[ 0.611639] scsi host1: ahci
[ 0.611727] scsi host2: ahci
[ 0.611822] scsi host3: ahci
[ 0.611861] ata1: SATA max UDMA/133 abar m2048@0xd171b000 port 0xd171b100 irq 32
[ 0.611863] ata2: DUMMY
[ 0.611864] ata3: DUMMY
[ 0.611865] ata4: DUMMY
[ 0.621966] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.624998] ahci 0000:07:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.625001] ahci 0000:07:00.0: flags: 64bit ncq led clo only pio ccc
[ 0.625238] scsi host4: ahci
[ 0.625288] ata5: SATA max UDMA/133 abar m8192@0xd1600000 port 0xd1600100 irq 16
[ 0.808604] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.808642] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.808673] usb usb2-port2: couldn't allocate usb_device
[ 0.808738] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.808768] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.808798] usb usb2-port6: couldn't allocate usb_device
[ 0.932036] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.952070] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.952367] ata5.00: ATA-9: SAMSUNG MZHPU512HCGL-000H1, UXM62H1Q, max UDMA/133
[ 0.952370] ata5.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.952660] ata5.00: configured for UDMA/133
[ 0.952785] scsi 4:0:0:0: Direct-Access ATA SAMSUNG MZHPU512 2H1Q PQ: 0 ANSI: 5
[ 0.955003] sd 4:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
[ 0.955028] sd 4:0:0:0: [sda] Write Protect is off
[ 0.955030] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.955038] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.956407] sda: sda1 sda2 sda3 sda4 sda5
[ 0.956825] sd 4:0:0:0: [sda] Attached SCSI disk
[ 0.968695] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 1.302451] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 1.539371] tsc: Refined TSC clocksource calibration: 2494.224 MHz
[ 1.646163] usb 1-13: new full-speed USB device number 4 using xhci_hcd
[ 1.718430] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.821454] usb 1-13: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.972758] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.972914] systemd[1]: Detected architecture 'x86-64'.
[ 1.973342] systemd[1]: Set hostname to <hp_arch>.
[ 2.046Sorry should have mentioned that. Yeah I tried that and it delays the error message a little bit (about 20 seconds after boot vs instantly). In the end it leads to the exact same error though.
-
MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation
Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
No battery after boot. Dell 7537
Hi All,
I have this issue after installing arch (currently the only issue)
As it is a notebook, I would love to see my current levels of battery, right after boot, but I am unable to. The only way how to trigger the battery notification is to
1.) hybernate
OR
2.) connect/disconnect the AC adapter.
And I would like to make it automatic.
Thank you, in advance, for any kind of clues.
Something about my system:
[void@GLaDOS ~]$ uname -a
Linux GLaDOS 3.13.7-1-ARCH #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014 x86_64 GNU/Linux
[void@GLaDOS ~]$
[void@GLaDOS ~]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda10
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a611dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a611e000-0x00000000a631ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6320000-0x00000000ba6f8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba6f9000-0x00000000bceeafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bceeb000-0x00000000bcf9cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bcf9d000-0x00000000bcffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable
[ 0.000000] e820: update [mem 0xa7124018-0xa7134057] usable ==> usable
[ 0.000000] e820: update [mem 0xa7116018-0xa7123057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a611dfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a611e000-0x00000000a631ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000a6320000-0x00000000a7116017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a7116018-0x00000000a7123057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a7123058-0x00000000a7124017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a7124018-0x00000000a7134057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a7134058-0x00000000ba6f8fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba6f9000-0x00000000bceeafff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bceeb000-0x00000000bcf9cfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000bcf9d000-0x00000000bcffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000023f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd.
[ 0.000000] efi: ACPI=0xbcffe000 ACPI 2.0=0xbcffe014 SMBIOS=0xbce84000
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009d000) (0MB)
[ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009d000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: type=0, attr=0x0, range=[0x00000000000e0000-0x0000000000100000) (0MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f61000) (15MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000001f61000-0x000000007fcdf000) (2013MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000007fcdf000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000080000000-0x00000000a4106000) (577MB)
[ 0.000000] efi: mem12: type=4, attr=0xf, range=[0x00000000a4106000-0x00000000a4126000) (0MB)
[ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x00000000a4126000-0x00000000a6107000) (31MB)
[ 0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000a6107000-0x00000000a611e000) (0MB)
[ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x00000000a611e000-0x00000000a6320000) (2MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000a6320000-0x00000000a70f6000) (13MB)
[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000a70f6000-0x00000000a7116000) (0MB)
[ 0.000000] efi: mem18: type=2, attr=0xf, range=[0x00000000a7116000-0x00000000a7136000) (0MB)
[ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000a7136000-0x00000000a7137000) (0MB)
[ 0.000000] efi: mem20: type=2, attr=0xf, range=[0x00000000a7137000-0x00000000a713a000) (0MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000a713a000-0x00000000a734d000) (2MB)
[ 0.000000] efi: mem22: type=1, attr=0xf, range=[0x00000000a734d000-0x00000000a7730000) (3MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000a7730000-0x00000000ac157000) (74MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000ac157000-0x00000000ad385000) (18MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000ad385000-0x00000000ad69d000) (3MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000ad69d000-0x00000000ad6c1000) (0MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000ad6c1000-0x00000000ad6e5000) (0MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000ad6e5000-0x00000000ad86e000) (1MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000ad86e000-0x00000000ad922000) (0MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000ad922000-0x00000000aeae1000) (17MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000aeae1000-0x00000000aeae3000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000aeae3000-0x00000000afdd9000) (18MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000afdd9000-0x00000000ba1b3000) (163MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000ba1b3000-0x00000000ba6f9000) (5MB)
[ 0.000000] efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000ba6f9000-0x00000000ba8fb000) (2MB)
[ 0.000000] efi: mem36: type=6, attr=0x800000000000000f, range=[0x00000000ba8fb000-0x00000000bc8fb000) (32MB)
[ 0.000000] efi: mem37: type=0, attr=0xf, range=[0x00000000bc8fb000-0x00000000bceeb000) (5MB)
[ 0.000000] efi: mem38: type=10, attr=0xf, range=[0x00000000bceeb000-0x00000000bcf9d000) (0MB)
[ 0.000000] efi: mem39: type=9, attr=0xf, range=[0x00000000bcf9d000-0x00000000bcfff000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000bcfff000-0x00000000bd000000) (0MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x0000000100000000-0x000000023f600000) (5110MB)
[ 0.000000] efi: mem42: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem43: type=0, attr=0x0, range=[0x00000000bd000000-0x00000000bfa00000) (42MB)
[ 0.000000] efi: mem44: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB)
[ 0.000000] efi: mem45: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
[ 0.000000] efi: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem47: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem48: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem49: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem50: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem51: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. Inspiron 7537/07PF9F, BIOS A07 01/21/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00BE000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 00BD000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02b3f000, 0x02b3ffff] PGTABLE
[ 0.000000] BRK [0x02b40000, 0x02b40fff] PGTABLE
[ 0.000000] BRK [0x02b41000, 0x02b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23f400000-0x23f5fffff]
[ 0.000000] [mem 0x23f400000-0x23f5fffff] page 2M
[ 0.000000] BRK [0x02b42000, 0x02b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23f3fffff]
[ 0.000000] [mem 0x23c000000-0x23f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xa611dfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xa5ffffff] page 2M
[ 0.000000] [mem 0xa6000000-0xa611dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xa6320000-0xba6f8fff]
[ 0.000000] [mem 0xa6320000-0xa63fffff] page 4k
[ 0.000000] [mem 0xa6400000-0xba5fffff] page 2M
[ 0.000000] [mem 0xba600000-0xba6f8fff] page 4k
[ 0.000000] BRK [0x02b43000, 0x02b43fff] PGTABLE
[ 0.000000] BRK [0x02b44000, 0x02b44fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbcfff000-0xbcffffff]
[ 0.000000] [mem 0xbcfff000-0xbcffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7fcdf000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000bcffe014 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000bcffe170 0000CC (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 00000000bcffb000 00010C (v05 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
[ 0.000000] ACPI: DSDT 00000000bcfe9000 00D96C (v02 DELL HSW-LPT 00000000 INTL 20120711)
[ 0.000000] ACPI: FACS 00000000bcf9a000 000040
[ 0.000000] ACPI: ASF! 00000000bcffd000 0000A5 (v32 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: HPET 00000000bcffa000 000038 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: LPIT 00000000bcff9000 00005C (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: APIC 00000000bcff8000 000098 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: MCFG 00000000bcff7000 00003C (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 00000000bcfe8000 000228 (v01 DELL sensrhub 00000000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000bcfe5000 002028 (v01 DELL PtidDevc 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000bcfe4000 0004D6 (v01 DELL Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000bcfe3000 000AD8 (v01 DELL CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000bcfdf000 003517 (v01 DELL SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: UEFI 00000000bcfde000 000042 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: MSDM 00000000bcf72000 000055 (v03 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: UEFI 00000000bcfdd000 00003E (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FPDT 00000000bcfdc000 000064 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SLIC 00000000bcfdb000 000176 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 00000000bcfd9000 001049 (v01 NvORef NvUltTbl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000bcfd8000 0008CA (v01 DELL IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: UEFI 00000000bcfd7000 0002CE (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: BGRT 00000000bcfd6000 000038 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: CSRT 00000000bcfd5000 0000C4 (v01 DELL WN09 00000002 LOHR 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23f5fffff]
[ 0.000000] NODE_DATA [mem 0x23f5f8000-0x23f5fcfff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236c00000-ffff88023ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00057fff]
[ 0.000000] node 0: [mem 0x00059000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xa611dfff]
[ 0.000000] node 0: [mem 0xa6320000-0xba6f8fff]
[ 0.000000] node 0: [mem 0xbcfff000-0xbcffffff]
[ 0.000000] node 0: [mem 0x100000000-0x23f5fffff]
[ 0.000000] On node 0 totalpages: 2071187
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11860 pages used for memmap
[ 0.000000] DMA32 zone: 759032 pages, LIFO batch:31
[ 0.000000] Normal zone: 20440 pages used for memmap
[ 0.000000] Normal zone: 1308160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa611e000-0xa631ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa7116000-0xa7116fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa7123000-0xa7123fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa7124000-0xa7124fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa7134000-0xa7134fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba6f9000-0xbceeafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbceeb000-0xbcf9cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbcf9d000-0xbcffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf80f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[ 0.000000] e820: [mem 0xbfa00000-0xf80f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023f200000 s86336 r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2038802
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda10
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7993744K/8284748K available (5271K kernel code, 836K rwdata, 1676K rodata, 1128K init, 1324K bss, 291004K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 1795.962 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.58 BogoMIPS (lpj=5986540)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000021] init_memory_mapping: [mem 0xba6f9000-0xba8fafff]
[ 0.000024] [mem 0xba6f9000-0xba8fafff] page 4k
[ 0.000044] init_memory_mapping: [mem 0xba8fb000-0xbc8fafff]
[ 0.000045] [mem 0xba8fb000-0xba9fffff] page 4k
[ 0.000046] [mem 0xbaa00000-0xbc7fffff] page 2M
[ 0.000047] [mem 0xbc800000-0xbc8fafff] page 4k
[ 0.037714] Security Framework initialized
[ 0.037724] AppArmor: AppArmor disabled by boot time parameter
[ 0.037725] Yama: becoming mindful.
[ 0.038391] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.040413] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.041277] Mount-cache hash table entries: 256
[ 0.041479] Initializing cgroup subsys memory
[ 0.041486] Initializing cgroup subsys devices
[ 0.041488] Initializing cgroup subsys freezer
[ 0.041489] Initializing cgroup subsys net_cls
[ 0.041491] Initializing cgroup subsys blkio
[ 0.041517] CPU: Physical Processor ID: 0
[ 0.041518] CPU: Processor Core ID: 0
[ 0.041523] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.042693] mce: CPU supports 7 MCE banks
[ 0.042708] CPU0: Thermal monitoring enabled (TM1)
[ 0.042721] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
[ 0.042829] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
[ 0.043845] ACPI: Core revision 20131115
[ 0.056685] ACPI: All ACPI Tables successfully acquired
[ 0.061212] ftrace: allocating 21068 entries in 83 pages
[ 0.072756] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.105753] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
[ 0.105760] TSC deadline timer enabled
[ 0.105771] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.105779] ... version: 3
[ 0.105780] ... bit width: 48
[ 0.105781] ... generic registers: 4
[ 0.105782] ... value mask: 0000ffffffffffff
[ 0.105783] ... max period: 0000ffffffffffff
[ 0.105784] ... fixed-purpose events: 3
[ 0.105785] ... event mask: 000000070000000f
[ 0.132534] x86: Booting SMP configuration:
[ 0.147279] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.132537] .... node #0, CPUs: #1 #2 #3
[ 0.189504] x86: Booted up 1 node, 4 CPUs
[ 0.189509] smpboot: Total of 4 processors activated (14373.35 BogoMIPS)
[ 0.195133] devtmpfs: initialized
[ 0.198124] PM: Registering ACPI NVS region [mem 0xbceeb000-0xbcf9cfff] (729088 bytes)
[ 0.199015] RTC time: 17:45:30, date: 03/28/14
[ 0.199059] NET: Registered protocol family 16
[ 0.199163] cpuidle: using governor ladder
[ 0.199165] cpuidle: using governor menu
[ 0.199193] ACPI: bus type PCI registered
[ 0.199195] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.199264] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.199267] PCI: not using MMCONFIG
[ 0.199269] PCI: Using configuration type 1 for base access
[ 0.200095] bio: create slab <bio-0> at 0
[ 0.200221] ACPI: Added _OSI(Module Device)
[ 0.200223] ACPI: Added _OSI(Processor Device)
[ 0.200225] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.200226] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.205589] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.209306] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.255573] ACPI: SSDT 00000000bcedec18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.256196] ACPI: Dynamic OEM Table Load:
[ 0.256198] ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.268541] ACPI: SSDT 00000000bcede618 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.269250] ACPI: Dynamic OEM Table Load:
[ 0.269253] ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.281706] ACPI: SSDT 00000000bce90d98 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.282323] ACPI: Dynamic OEM Table Load:
[ 0.282325] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.295717] ACPI: Interpreter enabled
[ 0.295726] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.295733] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.295754] ACPI: (supports S0 S3 S4 S5)
[ 0.295755] ACPI: Using IOAPIC for interrupt routing
[ 0.295777] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.296299] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.307483] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.307717] ACPI: No dock devices found.
[ 0.403027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.403034] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.403170] \_SB_.PCI0:_OSC invalid UUID
[ 0.403171] _OSC request data:1 1f 0
[ 0.403176] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.403785] PCI host bridge to bus 0000:00
[ 0.403788] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.403791] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.403793] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.403795] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.403797] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.403798] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.403800] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.403802] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.403804] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.403805] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.403807] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.403809] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.403811] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.403812] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.403814] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.403816] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.403818] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.403827] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.403987] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.404001] pci 0000:00:02.0: reg 0x10: [mem 0xe3000000-0xe33fffff 64bit]
[ 0.404009] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.404015] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.404166] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.404176] pci 0000:00:03.0: reg 0x10: [mem 0xe3610000-0xe3613fff 64bit]
[ 0.404351] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.404370] pci 0000:00:14.0: reg 0x10: [mem 0xe3600000-0xe360ffff 64bit]
[ 0.404432] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.404565] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.404585] pci 0000:00:16.0: reg 0x10: [mem 0xe3619000-0xe361901f 64bit]
[ 0.404648] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.404791] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.404806] pci 0000:00:1b.0: reg 0x10: [mem 0xe3614000-0xe3617fff 64bit]
[ 0.404871] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.405010] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.405075] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.405213] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.405279] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.405384] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.405417] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.405482] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.405587] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.405620] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 0.405686] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.405827] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.405849] pci 0000:00:1d.0: reg 0x10: [mem 0xe361d000-0xe361d3ff]
[ 0.405942] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.406061] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.406099] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.406339] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.406355] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
[ 0.406363] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
[ 0.406370] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
[ 0.406378] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
[ 0.406385] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.406393] pci 0000:00:1f.2: reg 0x24: [mem 0xe361c000-0xe361c7ff]
[ 0.406431] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.406557] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.406571] pci 0000:00:1f.3: reg 0x10: [mem 0xe3618000-0xe36180ff 64bit]
[ 0.406592] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.406787] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.406893] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[ 0.406935] pci 0000:02:00.0: reg 0x10: [mem 0xe3500000-0xe3501fff 64bit]
[ 0.407119] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.407174] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.411704] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.411710] pci 0000:00:1c.2: bridge window [mem 0xe3500000-0xe35fffff]
[ 0.411794] pci 0000:03:00.0: [10ec:5287] type 00 class 0xff0000
[ 0.411812] pci 0000:03:00.0: reg 0x10: [mem 0xe3405000-0xe3405fff]
[ 0.411878] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.411944] pci 0000:03:00.0: supports D1 D2
[ 0.411946] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.411991] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.412035] pci 0000:03:00.1: [10ec:8168] type 00 class 0x020000
[ 0.412052] pci 0000:03:00.1: reg 0x10: [io 0x4000-0x40ff]
[ 0.412081] pci 0000:03:00.1: reg 0x18: [mem 0xe3404000-0xe3404fff 64bit]
[ 0.412100] pci 0000:03:00.1: reg 0x20: [mem 0xe3400000-0xe3403fff 64bit]
[ 0.412177] pci 0000:03:00.1: supports D1 D2
[ 0.412178] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.418364] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.418368] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.418371] pci 0000:00:1c.3: bridge window [mem 0xe3400000-0xe34fffff]
[ 0.418458] pci 0000:04:00.0: [10de:0fe4] type 00 class 0x030200
[ 0.418472] pci 0000:04:00.0: reg 0x10: [mem 0xe2000000-0xe2ffffff]
[ 0.418487] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.418502] pci 0000:04:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 0.418512] pci 0000:04:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.418523] pci 0000:04:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.425027] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.425031] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.425034] pci 0000:00:1c.4: bridge window [mem 0xe2000000-0xe2ffffff]
[ 0.425040] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.438876] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.438935] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.438989] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.439041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.439093] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.439145] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.439197] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.439248] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.452346] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.452355] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.452440] Found 1 acpi root devices
[ 0.452526] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.452530] vgaarb: loaded
[ 0.452532] vgaarb: bridge control possible 0000:00:02.0
[ 0.452565] PCI: Using ACPI for IRQ routing
[ 0.453935] PCI: pci_cache_line_size set to 64 bytes
[ 0.454004] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.454006] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.454007] e820: reserve RAM buffer [mem 0xa611e000-0xa7ffffff]
[ 0.454009] e820: reserve RAM buffer [mem 0xa7116018-0xa7ffffff]
[ 0.454011] e820: reserve RAM buffer [mem 0xa7124018-0xa7ffffff]
[ 0.454012] e820: reserve RAM buffer [mem 0xba6f9000-0xbbffffff]
[ 0.454014] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
[ 0.454016] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[ 0.454099] NetLabel: Initializing
[ 0.454100] NetLabel: domain hash size = 128
[ 0.454101] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.454114] NetLabel: unlabeled traffic allowed by default
[ 0.454127] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.454133] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.456157] Switched to clocksource hpet
[ 0.461039] pnp: PnP ACPI init
[ 0.461055] ACPI: bus type PNP registered
[ 0.461144] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.461150] system 00:00: [mem 0xfe800000-0xfe802fff] has been reserved
[ 0.461154] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.461172] pnp 00:01: [dma 4]
[ 0.461188] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.461211] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.461322] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.461362] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.461364] system 00:04: [io 0xffff] has been reserved
[ 0.461366] system 00:04: [io 0xffff] has been reserved
[ 0.461368] system 00:04: [io 0xffff] has been reserved
[ 0.461371] system 00:04: [io 0x1800-0x18fe] could not be reserved
[ 0.461373] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.461375] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.461424] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.461470] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.461473] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.461551] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.461612] pnp 00:08: Plug and Play ACPI device, IDs DLL05f9 SYN0600 SYN0002 PNP0f13 (active)
[ 0.461752] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.461754] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.461756] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.461758] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.461761] system 00:09: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.461763] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.461765] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.461767] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.461769] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.461771] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.461774] system 00:09: [mem 0xbfa10000-0xbfa1ffff] has been reserved
[ 0.461776] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.492900] system 00:0a: [mem 0xfe102000-0xfe102fff] has been reserved
[ 0.492904] system 00:0a: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.492907] system 00:0a: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.492909] system 00:0a: [mem 0xfe108000-0xfe108fff] has been reserved
[ 0.492911] system 00:0a: [mem 0xfe10a000-0xfe10afff] has been reserved
[ 0.492913] system 00:0a: [mem 0xfe10c000-0xfe10cfff] has been reserved
[ 0.492915] system 00:0a: [mem 0xfe10e000-0xfe10efff] has been reserved
[ 0.492917] system 00:0a: [mem 0xfe112000-0xfe112fff] has been reserved
[ 0.492920] system 00:0a: [mem 0xfe111000-0xfe111007] has been reserved
[ 0.492922] system 00:0a: [mem 0xfe111014-0xfe111fff] has been reserved
[ 0.492926] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.519796] pnp 00:0b: Plug and Play ACPI device, IDs SMO8810 (active)
[ 0.533124] pnp: PnP ACPI: found 12 devices
[ 0.533126] ACPI: bus type PNP unregistered
[ 0.539394] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.539397] pci 0000:04:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.539432] pci 0000:00:1c.3: BAR 15: assigned [mem 0xbfb00000-0xbfbfffff pref]
[ 0.539435] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.539446] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.539451] pci 0000:00:1c.2: bridge window [mem 0xe3500000-0xe35fffff]
[ 0.539463] pci 0000:03:00.0: BAR 6: assigned [mem 0xbfb00000-0xbfb0ffff pref]
[ 0.539466] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.539468] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.539473] pci 0000:00:1c.3: bridge window [mem 0xe3400000-0xe34fffff]
[ 0.539477] pci 0000:00:1c.3: bridge window [mem 0xbfb00000-0xbfbfffff pref]
[ 0.539483] pci 0000:04:00.0: BAR 6: can't assign mem pref (size 0x80000)
[ 0.539486] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.539488] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.539493] pci 0000:00:1c.4: bridge window [mem 0xe2000000-0xe2ffffff]
[ 0.539497] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.539503] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.539505] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.539507] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.539509] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.539511] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.539513] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.539515] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.539517] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.539518] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.539520] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.539522] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.539524] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.539526] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.539527] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.539529] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.539531] pci_bus 0000:00: resource 19 [mem 0xbfa00000-0xfeafffff]
[ 0.539533] pci_bus 0000:02: resource 1 [mem 0xe3500000-0xe35fffff]
[ 0.539535] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.539537] pci_bus 0000:03: resource 1 [mem 0xe3400000-0xe34fffff]
[ 0.539539] pci_bus 0000:03: resource 2 [mem 0xbfb00000-0xbfbfffff pref]
[ 0.539541] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.539543] pci_bus 0000:04: resource 1 [mem 0xe2000000-0xe2ffffff]
[ 0.539545] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.539577] NET: Registered protocol family 2
[ 0.539768] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.539937] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.540076] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.540097] TCP: reno registered
[ 0.540110] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.540141] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.540216] NET: Registered protocol family 1
[ 0.540228] pci 0000:00:02.0: Boot video device
[ 0.540306] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.540308] pci 0000:00:14.0: PCI INT A: no GSI
[ 0.540406] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.540596] PCI: CLS 64 bytes, default 64
[ 0.540638] Unpacking initramfs...
[ 0.613961] Freeing initrd memory: 3204K (ffff88007fcdf000 - ffff880080000000)
[ 0.613966] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.613969] software IO TLB [mem 0xb61b3000-0xba1b3000] (64MB) mapped at [ffff8800b61b3000-ffff8800ba1b2fff]
[ 0.614132] Scanning for low memory corruption every 60 seconds
[ 0.614413] audit: initializing netlink socket (disabled)
[ 0.614424] type=2000 audit(1396028730.569:1): initialized
[ 0.630220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.631594] zbud: loaded
[ 0.631777] VFS: Disk quotas dquot_6.5.2
[ 0.631820] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.631982] msgmni has been set to 15770
[ 0.632038] Key type big_key registered
[ 0.632238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.632273] io scheduler noop registered
[ 0.632275] io scheduler deadline registered
[ 0.632301] io scheduler cfq registered (default)
[ 0.632797] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.632812] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.632861] efifb: probing for efifb
[ 0.634403] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90004f00000, using 8100k, total 8100k
[ 0.634405] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.634406] efifb: scrolling: redraw
[ 0.634408] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.640993] Console: switching to colour frame buffer device 240x67
[ 0.647481] fb0: EFI VGA frame buffer device
[ 0.647490] intel_idle: MWAIT substates: 0x11142120
[ 0.647491] intel_idle: v0.4 model 0x45
[ 0.647492] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.647675] GHES: HEST is not enabled!
[ 0.647727] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.648142] Linux agpgart interface v0.103
[ 0.648200] rtc_cmos 00:05: RTC can wake from S4
[ 0.648326] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.648354] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.648365] Intel P-state driver initializing.
[ 0.648375] Intel pstate controlling: cpu 0
[ 0.648400] Intel pstate controlling: cpu 1
[ 0.648412] Intel pstate controlling: cpu 2
[ 0.648421] Intel pstate controlling: cpu 3
[ 0.648546] drop_monitor: Initializing network drop monitor service
[ 0.648595] TCP: cubic registered
[ 0.648677] NET: Registered protocol family 10
[ 0.648811] NET: Registered protocol family 17
[ 0.648818] Key type dns_resolver registered
[ 0.649004] registered taskstats version 1
[ 0.649644] Magic number: 6:126:796
[ 0.649712] rtc_cmos 00:05: setting system clock to 2014-03-28 17:45:31 UTC (1396028731)
[ 0.649748] PM: Hibernation image not present or could not be loaded.
[ 0.650354] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
[ 0.650355] Write protecting the kernel read-only data: 8192k
[ 0.652045] Freeing unused kernel memory: 860K (ffff880002529000 - ffff880002600000)
[ 0.652685] Freeing unused kernel memory: 372K (ffff8800027a3000 - ffff880002800000)
[ 0.657971] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.658953] systemd-udevd[56]: starting version 211
[ 0.671084] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.675200] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.675211] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.679063] ACPI: bus type USB registered
[ 0.679140] usbcore: registered new interface driver usbfs
[ 0.679147] usbcore: registered new interface driver hub
[ 0.679183] usbcore: registered new device driver usb
[ 0.679907] rtsx_pci 0000:03:00.0: irq 56 for MSI/MSI-X
[ 0.679921] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 56
[ 0.680383] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.680779] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 0.680781] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 0.680814] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.680820] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.680893] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.680910] xhci_hcd 0000:00:14.0: irq 57 for MSI/MSI-X
[ 0.681298] SCSI subsystem initialized
[ 0.682133] ehci-pci: EHCI PCI platform driver
[ 0.682152] libata version 3.00 loaded.
[ 0.682614] hub 1-0:1.0: USB hub found
[ 0.682629] hub 1-0:1.0: 9 ports detected
[ 0.684167] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.684171] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.684312] hub 2-0:1.0: USB hub found
[ 0.684323] hub 2-0:1.0: 4 ports detected
[ 0.686657] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.686662] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 0.686674] ehci-pci 0000:00:1d.0: debug port 2
[ 0.690559] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.690585] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe361d000
[ 0.699417] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.699600] hub 3-0:1.0: USB hub found
[ 0.699606] hub 3-0:1.0: 3 ports detected
[ 0.699755] ahci 0000:00:1f.2: version 3.0
[ 0.699897] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X
[ 0.712779] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.712783] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.713215] scsi0 : ahci
[ 0.713307] scsi1 : ahci
[ 0.713387] scsi2 : ahci
[ 0.713484] scsi3 : ahci
[ 0.713533] ata1: SATA max UDMA/133 abar m2048@0xe361c000 port 0xe361c100 irq 58
[ 0.713535] ata2: DUMMY
[ 0.713536] ata3: DUMMY
[ 0.713537] ata4: DUMMY
[ 0.716082] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.032692] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.039030] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.039119] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
[ 1.039122] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.042744] usb 1-4: new low-speed USB device number 2 using xhci_hcd
[ 1.045496] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.045588] ata1.00: configured for UDMA/133
[ 1.045794] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2BA3 PQ: 0 ANSI: 5
[ 1.047782] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.047862] sd 0:0:0:0: [sda] Write Protect is off
[ 1.047865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.047891] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.058547] usb 1-4: config 1 has an invalid interface number: 1 but max is 0
[ 1.058551] usb 1-4: config 1 has no interface number 0
[ 1.060336] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.063706] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.068657] usbcore: registered new interface driver usbhid
[ 1.068661] usbhid: USB HID core driver
[ 1.103349] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[ 1.104072] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.222575] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[ 1.475839] usb 1-6: new full-speed USB device number 4 using xhci_hcd
[ 1.615761] tsc: Refined TSC clocksource calibration: 1795.842 MHz
[ 1.649158] usb 1-7: new full-speed USB device number 5 using xhci_hcd
[ 1.664033] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.672757] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input2
[ 1.672889] hid-multitouch 0003:04F3:0206.0002: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-7/input0
[ 1.775780] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.899629] hub 3-1:1.0: USB hub found
[ 1.899695] hub 3-1:1.0: 8 ports detected
[ 2.457525] random: nonblocking pool is initialized
[ 2.615440] Switched to clocksource tsc
[ 2.647237] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 3.254903] systemd[1]: systemd 211 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 3.255062] systemd[1]: Detected architecture 'x86-64'.
[ 3.260574] systemd[1]: Set hostname to <GLaDOS>.
[ 3.894501] systemd[1]: Starting Login Prompts.
[ 3.894597] systemd[1]: Reached target Login Prompts.
[ 3.894608] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.894664] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.894672] systemd[1]: Starting Remote File Systems.
[ 3.894742] systemd[1]: Reached target Remote File Systems.
[ 3.894756] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.894782] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.894789] systemd[1]: Starting Paths.
[ 3.894848] systemd[1]: Reached target Paths.
[ 3.894866] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.895033] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.895044] systemd[1]: Starting Encrypted Volumes.
[ 3.895105] systemd[1]: Reached target Encrypted Volumes.
[ 3.895115] systemd[1]: Expecting device dev-disk-by\x2duuid-8cdc5395\x2dad83\x2d429c\x2d95af\x2d73bc6b769621.device...
[ 3.895196] systemd[1]: Starting EFI System Partition Automount.
[ 3.895321] systemd[1]: Set up automount EFI System Partition Automount.
[ 3.895330] systemd[1]: Expecting device dev-disk-by\x2duuid-BE9C\x2dD69C.device...
[ 3.895395] systemd[1]: Starting Root Slice.
[ 3.898003] systemd[1]: Created slice Root Slice.
[ 3.898010] systemd[1]: Starting User and Session Slice.
[ 3.898131] systemd[1]: Created slice User and Session Slice.
[ 3.898137] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.898192] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.898197] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.898262] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.898268] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.898329] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.898334] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.898386] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.898393] systemd[1]: Starting udev Control Socket.
[ 3.898437] systemd[1]: Listening on udev Control Socket.
[ 3.898443] systemd[1]: Starting udev Kernel Socket.
[ 3.898488] systemd[1]: Listening on udev Kernel Socket.
[ 3.898494] systemd[1]: Starting Journal Socket.
[ 3.898549] systemd[1]: Listening on Journal Socket.
[ 3.898558] systemd[1]: Starting System Slice.
[ 3.898674] systemd[1]: Created slice System Slice.
[ 3.898682] systemd[1]: Starting File System Check on Root Device...
[ 3.898945] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.899095] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.899104] systemd[1]: Mounting Temporary Directory...
[ 3.917769] systemd[1]: Starting system-getty.slice.
[ 3.918013] systemd[1]: Created slice system-getty.slice.
[ 3.956377] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.956919] systemd[1]: Mounting Debug File System...
[ 3.968760] systemd[1]: Starting Apply Kernel Variables...
[ 3.969194] systemd[1]: Starting udev Coldplug all Devices...
[ 3.980915] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.980935] systemd[1]: Starting Setup Virtual Console...
[ 3.982172] systemd[1]: Started Load Kernel Modules.
[ 3.982193] systemd[1]: Mounted FUSE Control File System.
[ 3.982211] systemd[1]: Mounting Configuration File System...
[ 3.982612] systemd[1]: Mounting Huge Pages File System...
[ 3.983050] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.983622] systemd[1]: Starting Journal Service...
[ 3.984025] systemd[1]: Started Journal Service.
[ 5.215071] systemd-udevd[143]: starting version 211
[ 5.215716] EXT4-fs (sda10): re-mounted. Opts: data=ordered
[ 5.979664] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 6.251597] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 6.260869] ACPI: Lid Switch [LID0]
[ 6.260910] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 6.260913] ACPI: Power Button [PWRB]
[ 6.260940] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 6.260942] ACPI: Sleep Button [SBTN]
[ 6.260969] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 6.260971] ACPI: Power Button [PWRF]
[ 6.316336] wmi: Mapper loaded
[ 6.325574] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.325577] ACPI: Thermal Zone [THM] (48 C)
[ 6.325814] ACPI: AC Adapter [AC] (off-line)
[ 6.325890] ACPI: Battery Slot [BAT0] (battery absent)
[ 6.355035] [drm] Initialized drm 1.1.0 20060810
[ 6.398515] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 6.511173] input: 2.4GHZ RF ONLY MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/input/input10
[ 6.511296] hid-generic 0003:1BCF:0535.0001: input,hiddev0,hidraw1: USB HID v1.00 Mouse [2.4GHZ RF ONLY MOUSE] on usb-0000:00:14.0-4/input1
[ 6.778869] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127800, board id: 2788, fw id: 1480745
[ 6.814920] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 6.935874] mousedev: PS/2 mouse device common for all mice
[ 6.974228] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 6.974578] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
[ 6.974609] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.978615] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 6.978620] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.978623] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 6.978625] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 6.978628] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.RP05.PEGP.GPIO 3 (20131115/utaddress-251)
[ 6.978629] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.978630] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 6.978632] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 6.978634] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
[ 6.978636] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.RP05.PEGP.GPIO 4 (20131115/utaddress-251)
[ 6.978637] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.IOPH 5 (20131115/utaddress-251)
[ 6.978639] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.978640] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.978725] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 6.978730] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.979647] [drm] Memory usable by graphics device = 2048M
[ 6.979651] checking generic (c0000000 7e9000) vs hw (c0000000 10000000)
[ 6.979652] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 6.979667] Console: switching to colour dummy device 80x25
[ 7.027190] i915 0000:00:02.0: irq 61 for MSI/MSI-X
[ 7.027200] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.027201] [drm] Driver supports precise vblank timestamp query.
[ 7.027320] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.080108] cfg80211: Calling CRDA to update world regulatory domain
[ 7.086677] fbcon: inteldrmfb (fb0) is primary device
[ 7.168718] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 7.168718] Copyright(c) 2003-2013 Intel Corporation
[ 7.168873] iwlwifi 0000:02:00.0: irq 62 for MSI/MSI-X
[ 7.226143] Bluetooth: Core ver 2.17
[ 7.226154] NET: Registered protocol family 31
[ 7.226154] Bluetooth: HCI device and connection manager initialized
[ 7.226160] Bluetooth: HCI socket layer initialized
[ 7.226161] Bluetooth: L2CAP socket layer initialized
[ 7.226163] Bluetooth: SCO socket layer initialized
[ 7.242079] usbcore: registered new interface driver btusb
[ 7.244675] media: Linux media interface: v0.10
[ 7.256730] Bluetooth: hci0: read Intel version: 370710018002030d33
[ 7.256731] Bluetooth: hci0: Intel device is already patched. patch num: 33
[ 7.259309] Linux video capture interface: v2.00
[ 7.273794] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6705)
[ 7.312920] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12
[ 7.312987] usbcore: registered new interface driver uvcvideo
[ 7.312988] USB Video Class driver (1.1.1)
[ 7.374427] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 7.455740] iTCO_vendor_support: vendor-support=0
[ 7.478306] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 7.478331] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 7.478424] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.731609] input: Dell WMI hotkeys as /devices/virtual/input/input13
[ 8.366783] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 8.740790] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.740799] r8169 0000:03:00.1: can't disable ASPM; OS doesn't have ASPM control
[ 8.746908] r8169 0000:03:00.1: irq 63 for MSI/MSI-X
[ 8.747108] r8169 0000:03:00.1 eth0: RTL8411 at 0xffffc90004ef6000, e0:db:55:c1:a4:84, XID 1c800880 IRQ 63
[ 8.747110] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 8.749881] Console: switching to colour frame buffer device 240x67
[ 8.755049] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.755050] i915 0000:00:02.0: registered panic notifier
[ 8.755385] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20131115/video-1117)
[ 8.755388] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 8.755439] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input14
[ 8.756847] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.757196] acpi device:4a: registered as cooling_device4
[ 8.757318] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15
[ 8.757484] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.762426] iwlwifi 0000:02:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm
[ 8.763348] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X
[ 8.810630] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[ 8.810704] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 8.810940] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 8.822328] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
[ 8.822359] platform microcode: Direct firmware load failed with error -2
[ 8.822364] platform microcode: Falling back to user helper
[ 8.770050] systemd-udevd[156]: renamed network interface eth0 to enp3s0f1
[ 8.822931] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
[ 8.822943] platform microcode: Direct firmware load failed with error -2
[ 8.822944] platform microcode: Falling back to user helper
[ 8.823271] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
[ 8.823284] platform microcode: Direct firmware load failed with error -2
[ 8.823286] platform microcode: Falling back to user helper
[ 8.823582] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
[ 8.823590] platform microcode: Direct firmware load failed with error -2
[ 8.823592] platform microcode: Falling back to user helper
[ 8.823879] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 9.143183] Adding 16777212k swap on /dev/sda8. Priority:-1 extents:1 across:16777212k FS
[ 9.194383] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 9.194453] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 9.194518] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 9.260650] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 9.639211] systemd-journald[126]: Received request to flush runtime journal from PID 1
[ 9.662917] intel_rapl: domain uncore energy ctr 26416:26416 not working, skip
[ 17.212850] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 17.213080] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 17.225790] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 17.335522] r8169 0000:03:00.1 enp3s0f1: link down
[ 17.335561] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
[ 18.882354] bbswitch: version 0.8
[ 18.882360] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 18.882367] bbswitch: Found discrete VGA device 0000:04:00.0: \_SB_.PCI0.RP05.PEGP
[ 9.289785] systemd-udevd[150]: renamed network interface wlan0 to wlp2s0
[ 18.882376] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM:
[ 18.882379] Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 18.882497] bbswitch: detected an Optimus _DSM function
[ 18.882511] pci 0000:04:00.0: enabling device (0006 -> 0007)
[ 18.882569] bbswitch: Succesfully loaded. Discrete card 0000:04:00.0 is on
[ 18.884220] bbswitch: disabling discrete graphics
[ 18.884227] ACPI WarningHi, I have the same laptop and had the same problem.
I have solved it by adding the following arguments to the kernel command line:
acpi_osi=Linux acpi_backlight=vendor
Note: acpi_osi only did the trick, but then the backlight service fails. acpi_backlight fixes the service. -
IPhone 5 won't boot up, error 4005 when trying to restore!
First things first - English is not my first language so please excuse the errors I make. If anything is unclear/badly explained just say so and I will do my best to try again.
I am the (right now not so) happy owner of a iPhone 5 64GB since late april. It was purchased online in the germal localization of apple store.
For a month or two everything was alright, but suddenly the phone went out and restarted - at first I panicked a bit, but after a few weeks without any problems I thought that was a one time occurrence. Then it happend again. And again. And again. Sometimes it didn't restart for over an hour. (This was especially aggravating while I travelled and all my tickets were on that phone.) This all was while iOS 6.X was still a thing.
I updated to iOS 7 as soon as it was out and it worked well for some weeks. Then it broke down again and didn't boot at all, it was looped in the process. I panicked and googled and restored it successfully via restore mode. (Against all advice from backup though.)
It worked for a while but a few days ago it broke down again. Annoyed I wanted to repeat it, but restore mode wouldn't work anymore! That "connect to iTunes" symbol won't even show up and iTunes doesn't recognize the phone.
I tried DFU mode, iTunes now connected and initiated the restore process. But while it showed "Waiting for iPhone" the phone (in DFU mode!) suddenly tried to restart over and over (logo showing and fading and showing again...). Everytime I got "Error 4005". (That seems to be a error usually occurring when a cable or an adapter is broken, so I believe that the rebooting of the phone "broke" the connection to iTunes or something?)
What I tried so far:
Switching cables
Crying
Different computers
my main computer (Win7 64 Pro), with my full iTunes library
a new account on my main computer, iTunes without a linked ID
my MacBook Air (OSX Lion) with a linked iTunes and, after reinstalling, a "blank" one
another computer with Win7 64 Pro and a virginal iTunes (this got Error 4014 the first time, after that also 4005)
"Repaired" Apple Mobile Device Support
Crying some more
I haven't had a phone for several days now and I'm giving up. I will contact support tomorrow.
But is there ANYONE who knows this problem? I know that the reboot loop is notorious, but that even DFU mode (and yes, I used it correctly) doesn't work? Hardware defect? (I was VERY gentle with the phone...)
Any help, information and last straws would be very much appreciated. I still hope I simply overlooked something obvious.
Thank you!Yesterday (April 14, 2014), my 32Gb iPhone 5S running ios 7.1 unexpectantly shutdown. After plugging it in to the MacBook that I normally sync to, iTunes told me that the iPhone was in Restore mode. After some seaching on the web, I decided to let iTunes proceed with what it claimed was the only course; a restore. It claimed that all data would be erased. I went ahead since I had a backup (old). The MacBook didn't have a copy of the most recent iOS (7.1), so it downloaded v7.1, verified it and started working with the iPhone. After a minute (roughly) the iPhone lit up, but didn't proceed past the Apple logo. iTunes eventually showed an error saying the operation was unsuccessful; ending with (4005). Apple support suggested I turn off "Find My iPhone" from iCloud. Tried that, no change in the result. I tried the restore procedure again, but this time after the restore error appeared, I dismissed the error and left the iPhone plugged in to the Mac. After a few more minutes the iPhone continued to start up! I was able to backup all data locally to my Mac, and then complete the Restore. A fresh install of iOS 7.1 and a restore from backup gave me my phone back. In summary, don't give up if you see error (4005). Hope this helps someone. And back up your phone regularly!
-
No Bootable Device - Insert Boot Disk Error...
Ok so today I installed Windows 7 Ultimate 64-Bit on my 750GB Toshiba HDD in my Optibay and was installed successfully, installed all the Drivers from Windows Support flash drive and when I try to reboot into Windows 7 I get the "No Bootable Device - Insert Boot Disk Error" everytime!! lol What the heck is going on here??
Specs:lennarts wrote:
So, I encountered the same problem...
When I click the icon in bootcamp to install windows, after a bit of activity the Windows installation disc was spit put, the screen goes black and the error "No Bootable Device Insert Book Disk Press Any Key to Continue" appears on the screen. And nothing else but using the OSX installation disc helps.
I realised that the windows installation disc did not even spin up.
So what I did... I went back to OSX, reinserted windows installation disc, went to system preferences, selected the windows cd as a start up disc and locked it against the changes.
After that I went back to bootcamp and clicked gain to install windows. Everything worked fine now.
I just tried this and it didn't work for me. I keep getting a black screen with a cursor flashing in the upper left hand corner. -
Wireless mouse pointer which does not move after boot *sometimes*
Hi,
I have a wireless keyboard/mouse combo from Logitech (MK700 keyboard and MX705 mouse), which uses a USB receiver.
After booting, the mouse pointer sometimes is completely blocked, and I have to reboot to make it work. Sometimes I need to do this twice. I cannot reproduce it and this is not linked to the fact the mouse is active or on sleep mode. This seems to be a race condition, considering it is difficult to reproduce. Once the mouse pointer is working, there is no issue anymore during desktop use.
I compared lsmod when mouse pointer is working or not, and did not see any difference in the loaded modules.
This started to happen maybe 3 months ago. I have had this hardware for two years with no problem in the past. It is not a battery problem either.
Has anyone an idea?
Last edited by zebulon (2012-03-21 07:22:53)Thanks.
Ther is indeed a difference in evedev detection in Xorg logs when mouse is working or not working.
Not working:
[ 22.745]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 22.765] X Protocol Version 11, Revision 0
[ 22.765] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 22.765] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
[ 22.765] Kernel command line: root=/dev/sda6 ro vga=891
[ 22.765] Build Date: 05 March 2012 05:59:48AM
[ 22.765]
[ 22.765] Current version of pixman: 0.24.4
[ 22.765] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.765] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.765] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:16:55 2012
[ 22.816] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.816] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.841] (==) No Layout section. Using the first Screen section.
[ 22.841] (**) |-->Screen "screen1" (0)
[ 22.841] (**) | |-->Monitor "monitor1"
[ 22.841] (**) | |-->Device "device1"
[ 22.841] (**) Option "IgnoreABI" "True"
[ 22.841] (**) Ignoring ABI Version
[ 22.841] (==) Automatically adding devices
[ 22.841] (==) Automatically enabling devices
[ 22.866] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 22.866] Entry deleted from font path.
[ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 22.871] Entry deleted from font path.
[ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 22.871] Entry deleted from font path.
[ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 22.871] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 22.871] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.871] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.871] (II) Loader magic: 0x7cef60
[ 22.871] (II) Module ABI versions:
[ 22.871] X.Org ANSI C Emulation: 0.4
[ 22.871] X.Org Video Driver: 12.0
[ 22.871] X.Org XInput driver : 16.0
[ 22.871] X.Org Server Extension : 6.0
[ 22.872] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
[ 22.872] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.872] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[ 22.872] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 22.872] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 22.872] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 22.872] (II) "record" will be loaded by default.
[ 22.872] (II) "dri" will be loaded even though the default is to disable it.
[ 22.872] (II) "dri2" will be loaded by default.
[ 22.872] (II) LoadModule: "dbe"
[ 22.948] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 22.955] (II) Module dbe: vendor="X.Org Foundation"
[ 22.955] compiled for 1.12.0, module version = 1.0.0
[ 22.955] Module class: X.Org Server Extension
[ 22.955] ABI class: X.Org Server Extension, version 6.0
[ 22.955] (II) Loading extension DOUBLE-BUFFER
[ 22.955] (II) LoadModule: "v4l"
[ 22.955] (WW) Warning, couldn't open module v4l
[ 22.955] (II) UnloadModule: "v4l"
[ 22.955] (II) Unloading v4l
[ 22.955] (EE) Failed to load module "v4l" (module does not exist, 0)
[ 22.955] (II) LoadModule: "extmod"
[ 22.955] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 22.968] (II) Module extmod: vendor="X.Org Foundation"
[ 22.968] compiled for 1.12.0, module version = 1.0.0
[ 22.968] Module class: X.Org Server Extension
[ 22.968] ABI class: X.Org Server Extension, version 6.0
[ 22.968] (II) Loading extension MIT-SCREEN-SAVER
[ 22.968] (II) Loading extension XFree86-VidModeExtension
[ 22.968] (II) Loading extension XFree86-DGA
[ 22.968] (II) Loading extension DPMS
[ 22.968] (II) Loading extension XVideo
[ 22.968] (II) Loading extension XVideo-MotionCompensation
[ 22.968] (II) Loading extension X-Resource
[ 22.968] (II) LoadModule: "glx"
[ 22.968] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.007] (II) Module glx: vendor="NVIDIA Corporation"
[ 24.018] compiled for 4.0.2, module version = 1.0.0
[ 24.018] Module class: X.Org Server Extension
[ 24.018] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
[ 24.018] (II) Loading extension GLX
[ 24.018] (II) LoadModule: "record"
[ 24.019] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 24.026] (II) Module record: vendor="X.Org Foundation"
[ 24.026] compiled for 1.12.0, module version = 1.13.0
[ 24.026] Module class: X.Org Server Extension
[ 24.026] ABI class: X.Org Server Extension, version 6.0
[ 24.026] (II) Loading extension RECORD
[ 24.026] (II) LoadModule: "dri2"
[ 24.026] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.034] (II) Module dri2: vendor="X.Org Foundation"
[ 24.034] compiled for 1.12.0, module version = 1.2.0
[ 24.034] ABI class: X.Org Server Extension, version 6.0
[ 24.034] (II) Loading extension DRI2
[ 24.034] (II) LoadModule: "nvidia"
[ 24.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 24.111] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 24.120] compiled for 4.0.2, module version = 1.0.0
[ 24.120] Module class: X.Org Video Driver
[ 24.154] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
[ 24.154] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 24.161] (++) using VT number 7
[ 24.734] (II) Loading sub module "fb"
[ 24.734] (II) LoadModule: "fb"
[ 24.735] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.832] (II) Module fb: vendor="X.Org Foundation"
[ 24.832] compiled for 1.12.0, module version = 1.0.0
[ 24.832] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.832] (II) Loading sub module "wfb"
[ 24.832] (II) LoadModule: "wfb"
[ 24.832] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 27.003] (II) Module wfb: vendor="X.Org Foundation"
[ 27.003] compiled for 1.12.0, module version = 1.0.0
[ 27.003] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.003] (II) Loading sub module "ramdac"
[ 27.003] (II) LoadModule: "ramdac"
[ 27.003] (II) Module "ramdac" already built-in
[ 29.070] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 29.070] (==) NVIDIA(0): RGB weight 888
[ 29.070] (==) NVIDIA(0): Default visual is TrueColor
[ 29.070] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 29.070] (**) NVIDIA(0): Option "UseEdidDpi" "False"
[ 29.070] (**) NVIDIA(0): Option "DPI" "96 x 96"
[ 29.070] (**) NVIDIA(0): Enabling 2D acceleration
[ 31.411] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 31.411] (II) NVIDIA(GPU-0): stereo.
[ 31.416] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
[ 31.416] (--) NVIDIA(0): Memory: 917504 kBytes
[ 31.416] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
[ 31.416] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 31.416] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 31.417] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
[ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1)
[ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
[ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
[ 31.503] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.503] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 31.503] (**) NVIDIA(0): enabled on all display devices.)
[ 31.538] (II) NVIDIA(0): Assigned Display Device: DFP-1
[ 31.538] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
[ 31.538] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
[ 31.538] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
[ 31.538] (II) NVIDIA(0): Validated modes:
[ 31.538] (II) NVIDIA(0): "1920x1080"
[ 31.538] (II) NVIDIA(0): "1280x720"
[ 31.538] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 31.566] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
[ 31.566] (--) Depth 24 pixmap format is 32 bpp
[ 31.567] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 31.571] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 31.571] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 31.571] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 31.571] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 31.571] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 31.571] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 31.571] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 31.571] (II) NVIDIA(0): Config Options in the README.
[ 31.575] (II) NVIDIA(0): Setting mode "1920x1080"
[ 31.608] (II) Loading extension NV-GLX
[ 31.630] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 31.630] (==) NVIDIA(0): Backing store disabled
[ 31.630] (==) NVIDIA(0): Silken mouse enabled
[ 31.631] (**) NVIDIA(0): DPMS enabled
[ 31.631] (II) Loading extension NV-CONTROL
[ 31.631] (II) Loading extension XINERAMA
[ 31.631] (WW) NVIDIA(0): Option "PreferredMode" is not used
[ 31.631] (II) Loading sub module "dri2"
[ 31.631] (II) LoadModule: "dri2"
[ 31.631] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 31.631] (II) Module dri2: vendor="X.Org Foundation"
[ 31.631] compiled for 1.12.0, module version = 1.2.0
[ 31.631] ABI class: X.Org Server Extension, version 6.0
[ 31.631] (II) NVIDIA(0): [DRI2] Setup complete
[ 31.631] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 31.631] (==) RandR enabled
[ 31.631] (II) Initializing built-in extension Generic Event Extension
[ 31.631] (II) Initializing built-in extension SHAPE
[ 31.631] (II) Initializing built-in extension MIT-SHM
[ 31.631] (II) Initializing built-in extension XInputExtension
[ 31.631] (II) Initializing built-in extension XTEST
[ 31.631] (II) Initializing built-in extension BIG-REQUESTS
[ 31.631] (II) Initializing built-in extension SYNC
[ 31.631] (II) Initializing built-in extension XKEYBOARD
[ 31.631] (II) Initializing built-in extension XC-MISC
[ 31.631] (II) Initializing built-in extension SECURITY
[ 31.631] (II) Initializing built-in extension XINERAMA
[ 31.631] (II) Initializing built-in extension XFIXES
[ 31.631] (II) Initializing built-in extension RENDER
[ 31.631] (II) Initializing built-in extension RANDR
[ 31.631] (II) Initializing built-in extension COMPOSITE
[ 31.631] (II) Initializing built-in extension DAMAGE
[ 31.632] (II) Initializing extension GLX
[ 32.105] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 32.105] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.105] (II) LoadModule: "evdev"
[ 32.105] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 32.188] (II) Module evdev: vendor="X.Org Foundation"
[ 32.188] compiled for 1.12.0, module version = 2.7.0
[ 32.188] Module class: X.Org XInput Driver
[ 32.188] ABI class: X.Org XInput driver, version 16.0
[ 32.188] (II) Using input driver 'evdev' for 'Power Button'
[ 32.188] (**) Power Button: always reports core events
[ 32.188] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 32.188] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.188] (--) evdev: Power Button: Found keys
[ 32.188] (II) evdev: Power Button: Configuring as keyboard
[ 32.188] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 32.188] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 32.188] (**) Option "xkb_rules" "evdev"
[ 32.188] (**) Option "xkb_model" "evdev"
[ 32.188] (**) Option "xkb_layout" "gb"
[ 32.240] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 32.240] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.240] (II) Using input driver 'evdev' for 'Power Button'
[ 32.240] (**) Power Button: always reports core events
[ 32.240] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 32.240] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.241] (--) evdev: Power Button: Found keys
[ 32.241] (II) evdev: Power Button: Configuring as keyboard
[ 32.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 32.241] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 32.241] (**) Option "xkb_rules" "evdev"
[ 32.241] (**) Option "xkb_model" "evdev"
[ 32.241] (**) Option "xkb_layout" "gb"
[ 32.241] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event0)
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
[ 32.241] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
[ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event0"
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
[ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
[ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.241] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
[ 32.241] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 8)
[ 32.241] (**) Option "xkb_rules" "evdev"
[ 32.241] (**) Option "xkb_model" "evdev"
[ 32.241] (**) Option "xkb_layout" "gb"
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
[ 32.241] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
[ 32.241] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event4)
[ 32.241] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
[ 32.241] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
[ 32.241] (**) UVC Camera (046d:09a4): always reports core events
[ 32.241] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event4"
[ 32.241] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
[ 32.241] (--) evdev: UVC Camera (046d:09a4): Found keys
[ 32.241] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
[ 32.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input4/event4"
[ 32.242] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 9)
[ 32.242] (**) Option "xkb_rules" "evdev"
[ 32.242] (**) Option "xkb_model" "evdev"
[ 32.242] (**) Option "xkb_layout" "gb"
[ 32.242] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 32.242] (II) No input driver specified, ignoring this device.
[ 32.242] (II) This device may have been added with another device file.
Working:
[ 21.623]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 21.642] X Protocol Version 11, Revision 0
[ 21.642] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 21.642] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
[ 21.642] Kernel command line: root=/dev/sda6 ro vga=891
[ 21.642] Build Date: 05 March 2012 05:59:48AM
[ 21.642]
[ 21.642] Current version of pixman: 0.24.4
[ 21.642] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.642] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.643] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:18:23 2012
[ 21.702] (==) Using config file: "/etc/X11/xorg.conf"
[ 21.702] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 21.727] (==) No Layout section. Using the first Screen section.
[ 21.727] (**) |-->Screen "screen1" (0)
[ 21.727] (**) | |-->Monitor "monitor1"
[ 21.727] (**) | |-->Device "device1"
[ 21.727] (**) Option "IgnoreABI" "True"
[ 21.727] (**) Ignoring ABI Version
[ 21.727] (==) Automatically adding devices
[ 21.727] (==) Automatically enabling devices
[ 21.752] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 21.752] Entry deleted from font path.
[ 21.757] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 21.757] Entry deleted from font path.
[ 21.757] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 21.765] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 21.765] Entry deleted from font path.
[ 21.765] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 21.765] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 21.765] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 21.765] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 21.765] (II) Loader magic: 0x7cef60
[ 21.765] (II) Module ABI versions:
[ 21.765] X.Org ANSI C Emulation: 0.4
[ 21.765] X.Org Video Driver: 12.0
[ 21.765] X.Org XInput driver : 16.0
[ 21.765] X.Org Server Extension : 6.0
[ 21.766] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
[ 21.766] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 21.766] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[ 21.766] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 21.766] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 21.766] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 21.766] (II) "record" will be loaded by default.
[ 21.766] (II) "dri" will be loaded even though the default is to disable it.
[ 21.766] (II) "dri2" will be loaded by default.
[ 21.766] (II) LoadModule: "dbe"
[ 21.826] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 21.833] (II) Module dbe: vendor="X.Org Foundation"
[ 21.833] compiled for 1.12.0, module version = 1.0.0
[ 21.833] Module class: X.Org Server Extension
[ 21.833] ABI class: X.Org Server Extension, version 6.0
[ 21.833] (II) Loading extension DOUBLE-BUFFER
[ 21.833] (II) LoadModule: "v4l"
[ 21.833] (WW) Warning, couldn't open module v4l
[ 21.833] (II) UnloadModule: "v4l"
[ 21.833] (II) Unloading v4l
[ 21.833] (EE) Failed to load module "v4l" (module does not exist, 0)
[ 21.833] (II) LoadModule: "extmod"
[ 21.833] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 21.846] (II) Module extmod: vendor="X.Org Foundation"
[ 21.846] compiled for 1.12.0, module version = 1.0.0
[ 21.846] Module class: X.Org Server Extension
[ 21.846] ABI class: X.Org Server Extension, version 6.0
[ 21.846] (II) Loading extension MIT-SCREEN-SAVER
[ 21.846] (II) Loading extension XFree86-VidModeExtension
[ 21.846] (II) Loading extension XFree86-DGA
[ 21.846] (II) Loading extension DPMS
[ 21.846] (II) Loading extension XVideo
[ 21.846] (II) Loading extension XVideo-MotionCompensation
[ 21.846] (II) Loading extension X-Resource
[ 21.846] (II) LoadModule: "glx"
[ 21.846] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.902] (II) Module glx: vendor="NVIDIA Corporation"
[ 22.913] compiled for 4.0.2, module version = 1.0.0
[ 22.913] Module class: X.Org Server Extension
[ 22.913] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
[ 22.913] (II) Loading extension GLX
[ 22.913] (II) LoadModule: "record"
[ 22.913] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22.921] (II) Module record: vendor="X.Org Foundation"
[ 22.921] compiled for 1.12.0, module version = 1.13.0
[ 22.921] Module class: X.Org Server Extension
[ 22.921] ABI class: X.Org Server Extension, version 6.0
[ 22.921] (II) Loading extension RECORD
[ 22.921] (II) LoadModule: "dri2"
[ 22.921] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.929] (II) Module dri2: vendor="X.Org Foundation"
[ 22.929] compiled for 1.12.0, module version = 1.2.0
[ 22.929] ABI class: X.Org Server Extension, version 6.0
[ 22.929] (II) Loading extension DRI2
[ 22.929] (II) LoadModule: "nvidia"
[ 22.929] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 23.006] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 23.014] compiled for 4.0.2, module version = 1.0.0
[ 23.014] Module class: X.Org Video Driver
[ 23.040] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
[ 23.040] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 23.047] (++) using VT number 7
[ 23.721] (II) Loading sub module "fb"
[ 23.721] (II) LoadModule: "fb"
[ 23.721] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.428] (II) Module fb: vendor="X.Org Foundation"
[ 24.428] compiled for 1.12.0, module version = 1.0.0
[ 24.428] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.428] (II) Loading sub module "wfb"
[ 24.428] (II) LoadModule: "wfb"
[ 24.428] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 26.531] (II) Module wfb: vendor="X.Org Foundation"
[ 26.531] compiled for 1.12.0, module version = 1.0.0
[ 26.531] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.531] (II) Loading sub module "ramdac"
[ 26.531] (II) LoadModule: "ramdac"
[ 26.531] (II) Module "ramdac" already built-in
[ 27.811] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 27.811] (==) NVIDIA(0): RGB weight 888
[ 27.811] (==) NVIDIA(0): Default visual is TrueColor
[ 27.811] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.811] (**) NVIDIA(0): Option "UseEdidDpi" "False"
[ 27.811] (**) NVIDIA(0): Option "DPI" "96 x 96"
[ 27.811] (**) NVIDIA(0): Enabling 2D acceleration
[ 29.881] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 29.881] (II) NVIDIA(GPU-0): stereo.
[ 29.911] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
[ 29.911] (--) NVIDIA(0): Memory: 917504 kBytes
[ 29.911] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
[ 29.911] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 29.911] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 29.911] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
[ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1)
[ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
[ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
[ 29.997] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 29.997] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 29.997] (**) NVIDIA(0): enabled on all display devices.)
[ 30.033] (II) NVIDIA(0): Assigned Display Device: DFP-1
[ 30.033] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
[ 30.033] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
[ 30.033] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
[ 30.033] (II) NVIDIA(0): Validated modes:
[ 30.033] (II) NVIDIA(0): "1920x1080"
[ 30.033] (II) NVIDIA(0): "1280x720"
[ 30.033] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 30.068] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
[ 30.068] (--) Depth 24 pixmap format is 32 bpp
[ 30.068] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 30.072] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 30.072] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 30.072] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 30.072] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 30.072] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 30.072] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 30.072] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 30.072] (II) NVIDIA(0): Config Options in the README.
[ 30.076] (II) NVIDIA(0): Setting mode "1920x1080"
[ 30.119] (II) Loading extension NV-GLX
[ 30.149] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 30.149] (==) NVIDIA(0): Backing store disabled
[ 30.149] (==) NVIDIA(0): Silken mouse enabled
[ 30.149] (**) NVIDIA(0): DPMS enabled
[ 30.149] (II) Loading extension NV-CONTROL
[ 30.150] (II) Loading extension XINERAMA
[ 30.150] (WW) NVIDIA(0): Option "PreferredMode" is not used
[ 30.150] (II) Loading sub module "dri2"
[ 30.150] (II) LoadModule: "dri2"
[ 30.150] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.150] (II) Module dri2: vendor="X.Org Foundation"
[ 30.150] compiled for 1.12.0, module version = 1.2.0
[ 30.150] ABI class: X.Org Server Extension, version 6.0
[ 30.150] (II) NVIDIA(0): [DRI2] Setup complete
[ 30.150] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 30.150] (==) RandR enabled
[ 30.150] (II) Initializing built-in extension Generic Event Extension
[ 30.150] (II) Initializing built-in extension SHAPE
[ 30.150] (II) Initializing built-in extension MIT-SHM
[ 30.150] (II) Initializing built-in extension XInputExtension
[ 30.150] (II) Initializing built-in extension XTEST
[ 30.150] (II) Initializing built-in extension BIG-REQUESTS
[ 30.150] (II) Initializing built-in extension SYNC
[ 30.150] (II) Initializing built-in extension XKEYBOARD
[ 30.150] (II) Initializing built-in extension XC-MISC
[ 30.150] (II) Initializing built-in extension SECURITY
[ 30.150] (II) Initializing built-in extension XINERAMA
[ 30.150] (II) Initializing built-in extension XFIXES
[ 30.150] (II) Initializing built-in extension RENDER
[ 30.150] (II) Initializing built-in extension RANDR
[ 30.150] (II) Initializing built-in extension COMPOSITE
[ 30.150] (II) Initializing built-in extension DAMAGE
[ 30.151] (II) Initializing extension GLX
[ 30.624] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 30.624] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.624] (II) LoadModule: "evdev"
[ 30.624] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.633] (II) Module evdev: vendor="X.Org Foundation"
[ 30.633] compiled for 1.12.0, module version = 2.7.0
[ 30.633] Module class: X.Org XInput Driver
[ 30.633] ABI class: X.Org XInput driver, version 16.0
[ 30.633] (II) Using input driver 'evdev' for 'Power Button'
[ 30.633] (**) Power Button: always reports core events
[ 30.633] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 30.633] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.633] (--) evdev: Power Button: Found keys
[ 30.633] (II) evdev: Power Button: Configuring as keyboard
[ 30.633] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 30.633] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 30.633] (**) Option "xkb_rules" "evdev"
[ 30.633] (**) Option "xkb_model" "evdev"
[ 30.633] (**) Option "xkb_layout" "gb"
[ 30.677] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 30.677] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.677] (II) Using input driver 'evdev' for 'Power Button'
[ 30.677] (**) Power Button: always reports core events
[ 30.677] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 30.677] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.677] (--) evdev: Power Button: Found keys
[ 30.677] (II) evdev: Power Button: Configuring as keyboard
[ 30.677] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 30.677] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 30.677] (**) Option "xkb_rules" "evdev"
[ 30.677] (**) Option "xkb_model" "evdev"
[ 30.677] (**) Option "xkb_layout" "gb"
[ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event0)
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[ 30.677] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event0"
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.677] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
[ 30.677] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 8)
[ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
[ 30.677] (II) No input driver specified, ignoring this device.
[ 30.677] (II) This device may have been added with another device file.
[ 30.678] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event1)
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
[ 30.678] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
[ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event1"
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
[ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
[ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input1/event1"
[ 30.678] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 9)
[ 30.678] (**) Option "xkb_rules" "evdev"
[ 30.678] (**) Option "xkb_model" "evdev"
[ 30.678] (**) Option "xkb_layout" "gb"
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
[ 30.678] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
[ 30.678] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event5)
[ 30.678] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
[ 30.678] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
[ 30.678] (**) UVC Camera (046d:09a4): always reports core events
[ 30.678] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event5"
[ 30.678] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
[ 30.678] (--) evdev: UVC Camera (046d:09a4): Found keys
[ 30.678] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
[ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input5/event5"
[ 30.678] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 10)
[ 30.678] (**) Option "xkb_rules" "evdev"
[ 30.678] (**) Option "xkb_model" "evdev"
[ 30.678] (**) Option "xkb_layout" "gb"
[ 30.678] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 30.678] (II) No input driver specified, ignoring this device.
[ 30.678] (II) This device may have been added with another device file.
I note the differences start there:
(--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
vs
(II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
Could my Logitech camera interfere with the keyboard/mouse unifier detection? -
Very slow openbox startup after boot
Hi.
My computer is being very laggy lately in some specific cases.
(In contrast, windows installation works really fast, so its really a linux issue). One of the issues I'm trying to resolve now is the following:
My #openbox installation starts up really slow when I first fire it up after boot. It takes about 20-30s with nothing in autostart.sh
Any ideas and tips how I could isolate the issue here?
Kernel: 3.6.7-1-ARCH
Window Manager: Openbox
Desktop Environment: /
Packages: 1416
CPU: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz
RAM: 778 MB / 5922 MB
Disk: 616G / 715GIs there anything in .xsession-errors?
A good way to debug this is to start your computer in console mode. Then login via ssh from a laptop and check the Xorg messages and find out where it hangs.
Maybe you are looking for
-
Some one is try to use my apple account, my password is been reset for some one else, plese help me?
I been having some problem with my account, some one else is try to use my apple account, my password is been reset and is not me, please can helpl me.
-
HT4910 Having trouble syncing iCalendar with iPhone5 using new iCloud system. Any clues?
I've tried trouble shooting but every time I try to open my Calendar now it tries to sync but just spins and spins and nothing happens. Any clues what I might be wrong? And no I cannot get into preferences on iCalendar now since it automatically tri
-
Why does one of site pages show up as index in my reports?
Why does one of site pages show up as index in my reports?
-
How do I get rid of the following warning : C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\utility\NIReport.llb\Set Report Font.vi - LabVIEW 8.0 changed a constant that was wired to a Case structure to a hidden control to maintain compa
-
Quick question; Use of static{}
Other than knowing it is useful to enable object interaction with methods outside of main, I have never come across public static char[] chars; public static String charArray = "abcdefghijklmnopqrstuvwxyz0123456789"; static { // Code in question