Freight condition getting multiplied with the quantity

Dear Gurus,
I have configured freight condition, ZHD0, copied from HD00. When I am putting Rs 1000 in header, if i have 10 quantities, it is getting multipled with 10 and getting the total as 10000. I want it to be 1000 only and not get multipled with the quantity. Kindly suggest what needs to be done.
Also, if there are 10 line items, the freight value should not be multipled with the quantity.
Kindly suggest
Shilpa Shah

Hi;
This could be issue of unit of measure. The sales unit of measure might be different than pricing unit of measure. So system might picking the unit conversion from material master. Like if your sales unit is CS and pricing PC. in material if it is maintained like 1 CS =10 PC. In this case system will multiply the amount.
I hope this will help.
Regards;
Avinash

Similar Messages

Payable to the bank gets multiplied in the vendor balance

HI SAP GURUS
My problem is there are several employees who have taken loan from Bank of Maharashtra. The EMI for them is to be deducted from the salary and paid to the bank. This linkage has been done. The deductions from employee salary are correct. The report is also correct. However , the payable to the bank gets multiplied in the vendor balance. Please suggest why the payable to the bank gets multiplied in the vendor balance . This creates a problem because every month this excess amount has to be neutralized.

Hi,
While defining the GL Account in Financial Statement Version, check box for Debit balance under Current Assets and Credit check box under current liability. We can define one GL Account twice in Financial statement version.
Customer when takes the report with tcode: F.01 using the financial statement version, the account will appear based on its balance as required.
Hope this resolves the query.
Thanks & Regards,
Harish

Can not get example to work after following instructions given in "Getting Started with the NI LabVIEW C Generator" guide

We explored using sbRIO for our project, for different reasons we ended up going with a different embedded solution . We are currently evaluating the LabVIEW C Generator to convert some of the core analysis routines from LabVIEW to C so the team that will be creating the embedded solution don't have to re-implement them from scratch.
Before converting our code, I followed the instructions given in the "Getting Started with the NI LabVIEW C Generator" manual to create a static library created inCygwin using GNU Compiler Collection (GCC).
I managed to compile the code, but when I type "run GCD.exe" in the Cygwin console, I just see the window flash with no time to see if the result is correct or not. I modified the main.c cde to add a getchar(), but the window still just flashes and now I am left with the GCD process still running and have to kill it using Windows Task Manager.
Has anyone else got this example to run? I am sure I am missing an obvious setting or step, please help me.
More details below.
Thanks,
Fab
Here is a video showing the steps I followed
If you don't want/can't see the video. Here are some screenshots of what I have done so far:
GratestCommonDivisor.lvproj C Generation build specs Information:
C Function prototype definition:
I copied Makefile located at: C:\Program Files (x86)\National Instruments\LabVIEW 2011\examples\CGenerator\Tutorial\Cygwin
and replaced both Makefile and Makefile.cygwin in the directory where the C code was generated
I also copied main.c from the same location and replaced the one generated
Here is the snapshot of the results after executing "make GCD.exe"
Then to run it I just type
I see a window open and close really quickly and I never see the result. I have tried adding the getchar() line to the main.c file, but still I don't get to see the results.
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion

Hi Kevin,
I hope you had a good Thanksgiving. I am attaching a zip file with the LabVIEW project, my build specification and my version of "Greatest Common Divisor.vi", which should be the same as the one that you have that ships with the LabVIEW C Generator, but just in case. I am also attaching a zip file with the C files generated by the LabVIEW C Generator.
You can also see the video I posted earlier with the steps I followed. I hope you are able to point out where I went wrong.
Thanks,
Fab
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion
Attachments:
GreatestCommonDivisor.zip ‏8 KB
CGen Files.zip ‏71 KB

Hello guys. I'm on the fence of buying a new Haswell MacBook Pro Retina. I'm a student so i plan to get it with the student's discount. I want to ask you guys whether is it possible to use debit card to purchase anything from apple online store?

Hello guys. I'm on the fence of buying a new Haswell MacBook Pro Retina. I'm a student so i plan to get it with the student's discount. I want to ask you guys whether is it possible to use debit card to purchase anything from apple online store? Im using CIMBclicks debit card. Thank you.

Call the online store and ask them! We are just users like yourself. Besides, you will get a much faster answer directly from the horses mouth and it will be correct!

Offcycle payment amount is getting adjusted with the regular payroll

Hi Sappers,
offcycle payment amount is getting adjusted with the regular payroll if the salary is negative.
We want to stop this...please help

Simply in the regular payroll you have to modify the rule X011 to cater the specific requirement.
You have to bring 0267 in between If statement
If SPRN
P0267
Else
P0014
p0015
ETC
End if.
I have faced same problem if you need will send you screen shot. Please let me know if required.
Afrasyab

TS3276 I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem. Please help!

I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem, just Yahoo. Can someone help me get out of this nightmare?

I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem, just Yahoo. Can someone help me get out of this nightmare?

REPORT GETS HUNG WITH THE REPORT QUEUE SHOWING THE STATUS OF OPENING

I have installed Oracle 9ids on windows 2000 platform. This installation is part of the oracle clinical installation process.
The installation went on fine except few problems during generating reports. I am able to generate report but as soon as any one of the report fails it stops all the subsequent reports . The failing report has the status of "Opening" in the report queue manager whereas all the subsequent reports get stuck with the status of "Firing before trigger" status in the report queue manager.
Has anybody encountered the same problem or anything similar... if so, pls hlp...
Regards,
Venus

I tried this Gill, but result is bit different :-
Seems some little modifications are needed. Report should be displayed like the below one where it says how many times the same Task is associated with the same incident. Eg. Task 'TASK_CIRCUIT_RESOLVER' is associated with the incident 'INC000000001434' 4 times. 'IPCG Diagnostic Template' is associated with 'INC000000000943' 2 times. Similarly for other records.
But I really thankful to you for giving me the logic proceed further. I tried '=RunningCount([Task Name]; Row; ([Task Name]; [Incident ID]))'. It gave me desired results. :-
But the only thing that needs to be done is to bring the single Task associated with the Incident..
Thanks,
Neha Pateria

Problem with the quantity field

hi every one
i am facing a problem with the quantity field (vbap-kwmeng)
as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
problem is input of length of quantity is 15 and the output length is 19
so when i am pressing save
say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
how can i capture the original changed value.
vamsi

what about define two fields in you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
you can test it,mybe some one has one better idea.

Help I just get stuck with the blank screen and the white circle

help I just get stuck with the blank screen and the white circle after i erase all content and setting
i dont know how to do pls help.

Try connecting the device to your iTunes library and restoring it. If necessary place the iPod into recovery mode using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock

I download Flash player, proceed through the steps, but it takes me to a page where Adobe wants me to buy photoshop and other products and no way to bypass this and just get on with the installation without buying anything. Anyone out there know how to d

I download Flash player, proceed through the steps, but it takes me to a page where Adobe wants me to buy photoshop and other products and no way to bypass this and just get on with the installation without buying anything. Anyone out there know how to do it?

Hi mansons67992701,
No purchase is required to install Flash Player. The offer you're seeing is optional. There should be a yellow 'Install Now' button on the bottom right of the page. Is the button not displaying? Please post a screenshot of the page (How to post a screenshot in the forum).
Maria

After hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

HT204088 My credit card was charge with out my approval, how can I get support with the issue?

My credit card was charge with out my approval, how can I get support with the issue?

If it's a purchase that appears on your purchase history (and not a temporary store holding charge which is made each time that you add or change your credit card details) and nobody else has access to your account and/or devices, then you can either try the 'report a problem' link from your purchase history to contact iTunes Support : http://reportaproblem.apple.com
Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How can I clean leather smart case bright green, or mayby prevent it to get dirthy with the kind of spray using for shoes.? Sorry for bad english

How can I clean leather smart case bright green, or mayby prevent it to get dirthy with the kind of spray using for shoes.? Sorry for bad english

Use the same cleaner as for shoes.

Getting started with the BC Open Platform

Hey BC partners,
Welcome to the BC developer forum!
To get started, just visit http://developers.businesscatalyst.com/ (username: alpha, password: bcdevdocs) and follow the Getting Started tutorials. This is a dedicated developer documentation site which includes information on how to register and create an app, links to API endpoints, modules and tag references and sample apps.
Here's what you should do:
Go to http://developers.businesscatalyst.com/getting-started/ and have a look at the introduction pages
Sign up as a developer and register your app, by clicking the "Create an App" button on the top right part of the screen: http://developers.businesscatalyst.com/getting-started/register.htmlNOTE: For now, all requests are manually reviewed and approved, it might take a couple of days for your app key to be sent
You'll receive the app key over email, or further clarifications, if needed.
While your key is generated, follow these steps to create a "Hello World" sample app on your site: http://developers.businesscatalyst.com/getting-started/building-your-first-app.html#hello_ world
Once you receive the app key, you can start building your app: http://developers.businesscatalyst.com/getting-started/building-your-first-app.html
Here's another sample app and instructions on how to use it and understand how it works: http://developers.businesscatalyst.com/samples/meet-the-team-app.html
Other useful developer resources:
Customizing the Admin Console menu using an app: http://developers.businesscatalyst.com/developer-documentation/customize-admin-menu.html
Get started with the Business Catalyst APIs: http://developers.businesscatalyst.com/developer-documentation/api-reference.html
API endpoints reference: http://docs.businesscatalyst.com/content/api-endpoints/index.html (username: alpha, password: bcdevdocs)check out the new Authentication, FileSystem and the webapps/webapp items APIs
The bcapi.js SDK - http://adobebc.github.io/bcapi.js/index.htmland how to use it: http://developers.businesscatalyst.com/developer-documentation/sdk-reference.html
Best practices when developing apps: http://developers.businesscatalyst.com/developer-documentation/best-practices.html
Within the next few months our team will continue to develop these features with the help of the Beta Group, and then open the development program to all partners of Business Catalyst.
We hope that you are just as excited as we are to embark in this new direction for Business Catalyst, and shape the future of the platform.
If you run into any problems or have any questions, start a new discussion on this forum
Enjoy,
The Business Catalyst team
P.S: Make sure to sign up to receive email notifications from this forum - by going to http://forums.adobe.com/community/business_catalyst/developer_forum and clicking "Follow this forum" in the Notifications pod on the right side of your screen.

Hi,
Although I'm learning I am a complete programming / javascript / json / jquery novice so my apologies in advance if this is a stupid question or i have failed to understand the new restful api functionality which is available under this beta.
In the past, where a client has had really specific functionality that was not achievable within the BC framework, I have implented an external php application (with the help of a web developer) and simply linked to it via a sub domain. Obviously not ideal.
My hope is that the new api functionality will open up a range of possibilities that will go some way toward eliminating the need to build extenal applications and simply extend the existing BC framework using the added api functionality.
One example that i would like to move solely on to BC is the following - http://mylist.grocerwatch.com.au/
The above is a grocery pricing comparison website whereby the applicaton highlights the cheapest and best value (comparible) products. The application also allows the user to select from the items displayed to create a shopping list showing where to buy the selected products for the best value. The user can also email, print, or save their shopping list.
My question is for someone who is more farmiliar with the new api and who is perhaps more experienced than me with programming. Would it be possible to create the above solely on BC without sacrificing speed, security, functionality etc?
Thanks.

How to get data with the raw pattern from resultset ?

would you tell me how to get data with the raw pattern from resultset ?
thank you in advance!
longgger2000

I tried getBytes() and getObject()
, but I can not get the right result , for example the
data in oracle database is 01000000DFFF, when In used
the method of getBytes() and getObject(), I get the
result of [B@1c2e8a4, very different , please tell me
why !
thank you
longgger2000
[B is byte arrayseem that it return an bytes array for you.

Freight condition getting multiplied with the quantity

Similar Messages

Maybe you are looking for