Freight Condition on Contract is copied to Release PO Header

Hello,
We have a contract for raw materail with freight condition (value) attached to the line item not the header. When release purchase order is created the freight condition is copied over to the HEADER not the line item and Is distributing the freight cost to all line items. We expect the total value of the freight condition to be applied to the Po line item. Can anyone explain why this happens and how to fix?
Best regards,
Diane

Hi Diane,
how did you set up the freight condition in your customizing? Is it a group condition? Please test the issue when it is NOT a group condition. The settings in the customizing should be for a fixed amount condition:
Cond. class   A Discount or surchar
Calculat.type B Fixed amount
Cond.category B Delivery costs
X item condition
or for a percentage condition:
Cond. class   A Discount or surcharge
Calculat.type A Percentage
Cond.category B Delivery costs
X item condition
Regards,
Edit

Similar Messages

Shipping conditions in Contracts not copied over to sales order w/ref

In standard SAP the shipping conditions are pulled in from the Sold-to party's customer master unless the shipping conditions are hard coded in the sales order type, in which case they overrule the shipping conditions of the sold-to.
A client enters contracts (CQ) with their customers and creates sales orders with reference to these contracts. The shipping conditions within these contracts are different from those on the Sold-to master record. The client wants the shipping conditions from the contract to flow through to the sales orders created with reference to the contract (instead of the system currently getting them from the sold-to). I do not believe this is standard functionality but I want to be absolutely sure before I respond to the client and tell them that we will have to create a custom routine in copy control to achieve this from the contract.
Other than tweaking copy control routines is there any way the system can be configured so that the shipping conditions from the Contract (CQ) header get pulled in when a sales order is created with reference to the CQ contract?
Any help/suggestions would be greatly appreciated.
Thanks,
SJ

Hi,
Whatever be the shipping conditions in contracts that can be flow to sales order,
Please check your input, if you mentioned in sales document then remove from there - VOV8
Also check in copy controll - VTAA
CQ to OR at header level
Copy requirement - 001
Tickmark to complete refrance
Kapil

Copying of freight conditions from billing document to return order

Hi,
I have a scenario of returns with reference to the billing document. In earlier billing documents the conditions like freight, insurance etc., are maintained. While creating the return order with reference to the preceding billing document, system is copying the freight, insurance conditions also, which I donu2019t require in case of returns scenario. Can anyone help me to come out from this problem?
Thanks
Srinivas

Hi
In VTAF choose your source billing type and target sales type and choose your item category
In that i think in your case D is set
You can define a new pricing procedure for your return order and make the necessary settings in OVKK by leaving out all freight conditions
After this In VTAF choose your source billing type and target sales type and choose your item category
In pricing type you can set it to B so that a new pricing is carried out without the unwanted condition types when you make the return order referencing the billing doc
Alternatively you also try with pricing type H in that pricing type that is freight gets redetermined
Regards
Raja
Edited by: ramanathan raja on Nov 20, 2008 8:57 PM

How to avoid Freight condition gettign copied from F2 to supplemetary OR

Hello Expertes..
I am having copy control between the F2 & the supplemetay sales order. ( debit memo request)
In invoice I am putting freight condtion mannually which I do not want to get copied in the supplemetary order.
I have changed the pricing type from D to H ( H- redetermine freight condition) but this is allowing condition to get copied.
Kindly advice ASAP.

hello JP
thanks for prompt reply..well about 1 option) client does not want that
option 2 option) yes...we are able to delect the condition in supplement order but client does not want to this to be happen by the user.
option 3) I will check with the client.
Can we achieve this by changing H from D - item level in the copy control. could you plz expalin how does this H works?
Thanks & Regards
RaviRaj0308
Edited by: RaviRaj0308 on Apr 26, 2011 2:39 PM

Copying Freight condition from delivery, on order related billing line

Hello,
Greetings!
My client use Pitney Bowes interface to calculate freight on outbound deliveries, Interface creates condition ZPFR on delivery; It works well, however scenarios such as milestone billing and phantoms are order related billing; I couldn't find standard way to read those delivery conditions and bring over to order related invoice.
Appreciate your thoughts,
thank you,
Hetal

Hi Mukund,
As mentioned, Milestone orders and phantom parts are order related billing.
Components (for phantom) and lines on milestone order are shipped, therefore freight is calculated on delivery.
At this moment,
1. Workaround is to manually add freight condition on sales order, after PitneyBowes calculated freight on above delivery.
2. Write some custom solution to copy freight condition from delivery to sales order (may not be best solution, but to avoid manual workaround)
Therefore, freight would carry over to invoice and finance flow works as other delivery related invoicing.
thank you for reply.
Hetal

Freight condition value modify after reverse GR

Hi
I have done PO with freight condition FR1 and done GR again i reverse GR now i want to change my PO freight value but system is not allowed, in Config i have removed Dlivery cost B in Condition type now it will work but i want to know this is correct way or not or any other option.
What is use of Delivery cost B in PO,GR or MIRO, please explain this
Please suggest solution
Thanks
Shital D

Hi,
I have created two POs with & with out the config option : Delivery Costs - B. But in both the cases, the system does not allow the change in the freight percentage FRA1. For standard conditions like FRA1, the control will be entirely throgh the backend program. If you need to work with configuration/control data of the condition type, please create Z-condition by copying the std condition and try to change the control data.
thanks & regards
Chaitanya Rayaprolu

Freight condition modify after reverse GR

Hi,
I have done PO with freight condition FR1 and done GR again i reverse GR now i want to change my PO freight value but system is not allowed, in Config i have removed Dlivery cost B in Condition type now it will work but i want to know this is correct way or not or any other option.
What is use of Delivery cost B in PO,GR or MIRO, please explain this
Please suggest solution
Thank

hi
it is not possible to change value once GR is done
go for addition of new item (copy of original )
or take the freight in unplanned del cost

Freight Conditions not populating on free of charge sales order deliveries

I need some assistance, please. I have searched SCN, but have not been able to find a solution to my problem.
We need to be able to charge freight charges on Free of Charge sales orders and am not able to get the charges to populate in the delivery. We send the product for free, but sometimes need to charge the customer shipping charges.
Below are steps I have completed:
Created custom header condition of ZFRC
Added to sales order pricing procedure as a manual condition
(the charge will be updated from external system)
Created Delivery Pricing procedure containing only my
freight conditions (also manual condition)
VTLA settings for item category KLN (free of charge item):Condition Order requirements – 1 Header
VTFL settings for item category KLN:
Pricing Type – D Copy pricing elements unchanged
Price Source – E Delivery/Order
There are times when the freight charges will be added to the sales order, but I also need to be able to add them directly on the delivery.
When charges are added directly to the sales order, they will flow thru to the invoice without an issue, but when I try to add at the delivery level, they are not populating, which results in $0 invoice.
I am not receiving any kind of error messages when trying to add the charges.
We also have this situation with standard orders, but I am not having any problems with it. I tried to mimic that set up for free of charge orders, but it is not functioning properly.
Any assistance would be much appreciated.
Thanks!

Hi Amitesh,
Yes, the condition type used in the Sales Order is the same, ZFRC and it is also a header condition.
The condition analysis is not available in the invoice because there is no condition in the invoice. Below are screen shots of the analysis from the LINE ITEM of the delivery note (there is not analysis available on the header) and the header details of the conditions from the invoice and the delivery.
Line Item Analysis:
Delivery Header Details:
Invoice Header Details:
Please let me know if you need further information.
Thank you for your assistance!

Freight Condition in PO

At time of Creation of Purchase Order, we donot know the exact amount of freight etc.
The Material Supplier is not the Transport vendor.
Hence ,we need a Pricing Condition under planned delivery charges , which will not be displayed in Print out and does nt get added the PO print Grand Total.
And while doing LIV we can account frieght under Planned delivery cost.
We are not comfortable with the (subsequent) direct debit to material is MIRO,
as it is an audit problem since we donot have the track for which Purchase Order it is accountable.
And it hits the Price difference account.
How we can built this condition in SAP .
what are the basic things to be taken care to configure this requirement?

Hi,
Create a new condition copying existing freight condition FRA1
keep the condition category as B delivery costs-creates the separate line item in migo accounting doc
then make that condition manual entry has priority - u can put freight value in PO
Make it accural tick -it will post to provision for freight account
IN SCHEMA
dont put X - IN print column it will not get printed
assign account and provision key and assign account for provision in schema FR1 etc
make the condition statistical tick-it will not add to the gross price
when you create po add value of freight - no value addition to netpr add freight vendor
IN GR seperate line item for provision account
IN MIRO select delivery costs and pay to freight vendor
do let me know
BR
Diwakar

Manual Freight condition without Tax

Hi Experts,
I am looking for some help on setting up a Manual Freight condition in the Order but one that does not include Taxes.
I have created a copy of the Header Freight condition KF00 and everything looks fine except the Tax condition MWST takes this value also into account when calculating Tax.
How do I get my ZF00 freight charge to appear in the Net value but without Tax. I've read a few notes about moving the conditions around in the procedure but that then causes more issues as we have quite a lot of active conditions in V/08.
Any other way of using condition category or calculation type to achieve this?
Thanks in advance.
Sal

You can place this freight condition type below the tax condition type in your pricing procedure.
G. Lakshmipathi

Changing Freight condition in PO

Dear experts,
I have created a PO with basic price and a freight condition at item level, in the frieght condition I have entered a value. And then the PO is released, GRN also done. At this moment, I tried to change the frieght value, but could not be possible becuased the field has been gray out (display mode).
Then I tried to change the same after cancelling the GRN, but then also it didnt allow. Then I revoke the release back ( unrelease) for that PO. Then I tried, but not able to change.
My doubt is, whether once GRN is done a line item, is it not possible to change the frieght condition at item livel ?
If I want to change the value of that condition then what I shoudl do.
Pls help, your suggestions will be appreciated.
Thanks
VJ

Hi
whether once GRN is done a line item, is it not possible to change the frieght condition at item livel ?
If I want to change the value of that condition then what I shoudl do.
Once Po history create it is not possible to change it.
Regards
kaials Ugale

Freight condition getting multiplied with the quantity

Dear Gurus,
I have configured freight condition, ZHD0, copied from HD00. When I am putting Rs 1000 in header, if i have 10 quantities, it is getting multipled with 10 and getting the total as 10000. I want it to be 1000 only and not get multipled with the quantity. Kindly suggest what needs to be done.
Also, if there are 10 line items, the freight value should not be multipled with the quantity.
Kindly suggest
Shilpa Shah

Hi;
This could be issue of unit of measure. The sales unit of measure might be different than pricing unit of measure. So system might picking the unit conversion from material master. Like if your sales unit is CS and pricing PC. in material if it is maintained like 1 CS =10 PC. In this case system will multiply the amount.
I hope this will help.
Regards;
Avinash

Contract creation - copy control contract to contract

Hi guys,
I need to create a contract order in reference to another contract order. But in the copy control, I saved Header-diff.customer in order to put another Sold-to party when I create the second contract document.
Then, I want to use the button "Create with reference" with VA41 Tcode. Put in Contract :
Contract number
Releasing partner : a different sold to party in comparison to the contract in reference.
But when I finally visualized the contract SAP is going to create, the sold to party is still the old one from the referenced contract.
I can do this when I create a sales order with reference to a contract, but I can't do it from a contract to create another contract ...
Do you think there is mean to do it please ?
Thanks a lot
Alex

Hello Santosh,
And thanks for your answer.
It's possible to create a sales order with reference to a contract with different sold-to-party. I made it.
The thing is, I want to do the same from a contract to another contract by using the element "releasing partner" when you click on the button "create reference to".
Do you see that ?
Thanks
Alex

Freight condition type

when i am creating a po, in freight condition type my value is getting copied from my previous document, i dont want that to happen, how should i go about for changes.
well i have went in following path :- Enviroment Data-define default value for buyer-setting for default-price adoption :- do not copy.
but i want this chages to happen for all the user, not a single user.
regard
nabil

execute OMFI, double click on 01 or create a new one by copying 01 here go to the Price adoption tab & select the radio button for Do Not copy .....
Now go to SU01 and insert user id, enter in the parameter tab EVO as parameter ID and as value enter 01 or if you created a new one the ID of this newly created.

Freight Condition Gets Added Automatically In Scheduling AgreementMaterials

Hi! Our users are encountering this type of behavior in SAP recently on a scheduling agreement. Apparently, a freight condition automatically gets added when a material is added into the scheduling agreement. Users usually add the freight condition manually when doing this in scheduling agreements.
Is there an explanation / logic on this? Thanks in advance, gurus!

Go to scheduling agreement conditions tab. In that select your condition and choose "goto" in menu bar. then look for condition records. You can find from where it is copying
Regards
Antony

Freight Condition on Contract is copied to Release PO Header

Similar Messages

Maybe you are looking for